Best Zippo Bicycle Lighter

Zippo 28 Nov 2022 10+ Comments Open

1. Zippo 24011 Spades Pocket Lighter

Zippo 24011 Spades Pocket Lighter

A genuine Zippo lighter with a distinctive click. All metal construction works. For optimum performance, they recommend genuine Zippo premium lighter fluid, flints, and wicks. They can fix it for free if it works. Fuel: The lighter fluid is sold separately.

Brand: Zippo

👤The lighter is eye candy, it has a good look to it. If you are going to order one. It comes with fuel already inside and ready to use, so be aware. Depending on who is delivering it, there is a rule towards certain types of packages containing certain fluids, so it either comes with very little fuel or no. You can either get them at a local market or on Amazon. It is great. It is worth its money.

👤I have fit the torch insert perfectly and it seems well built. I have a problem with another seller. My torch insert didn't fit because it was a fake. Same thing can be said when trying a normal insert. There is a The right size for inserts is the ace of spades. Materials seem legit. It feels great. The zippos are very giftable and shiny. The symbols look great. No idea what it is. If you scratch at them a lot, you could peel them off. I am not sure. I would recommend this lighter to others. The insert should be upgraded to a torch. That is my preference. The sticker on the back may leave a mark. It's easy to clean.

👤A lighter with a nice design. The photos on the Amazon listing are accurate, but this thing is a bit different. The photos on Amazon show two completely different looks. The engraved side can look chrome or metallic in indoor lighting. It depends on the strength of the light hitting it. I was hoping for a metallic look. The cream color will be seen about 85% of the time. The silver metallic look can be achieved with the right light, and I think it's the etching process that creates the cream effect. There is a The "Black Ice" color of the metal case was a surprise. It looks like a black chrome in the photos. I thought it was a standard chrome case when I took it out of the box. I could tell it was different when I put it next to a different one. It is black. Unless you have a piece of regular chrome side by side, it's not easy to notice. If you're looking for something that is deep black with a high polish finish, this isn't it. This is not as obvious. It isn't what I was expecting, but I'm keeping it. I don't mean to say that it isn't attractive. It is. It's difficult to depict accurately in a photo on a web page. I like the picture of a ace of spades. It's decorative but doesn't have the iconography of crosses and skulls that will make you think you're a biker. The design is neutral from a design point of view, and the overall impression is that it is from another era, an old lighter in perfect condition. I bought the lighter because of that. They are both pretty, but not really calling up any images, just classy artwork on an inexpensive fire making tool.

2. Zippo Orange Matte Lighter 231

Zippo Orange Matte Lighter 231

A genuine Zippo lighter with a distinctive click. The Windproof design works virtually anywhere. For optimum performance, they recommend genuine Zippo premium fuel, flints, and wicks. Lifetime guarantee that "it works or they fix it free" Fuel: The lighter fuel is sold separately.

Brand: Zippo

👤If they sent me a lighter, I would have liked it. There is a I received a lighter made by Star1. There is a It seems to be a Chinese company. A fine lighter. I ordered what I asked for. I will include the link. Notice where it says "Amazon.com sells goods from and to other countries." "Genuine Zippo windproof lighter with distinctive Zippo "click" All metal construction; windproof design works virtually anywhere for a lifetime of use; for optimum performance, we recommend genuine Zippo premium lighter fluid, flints, and wicks Made in USA; lifetime guarantee." "Get it together" is the slogan for the premium lighter fluid from Zippo. AMAZON!

👤Don't buy this product. I paid a lot of money for the lighter, but it isn't worth it. The logo on it was different than the original one.

👤The new lighters are cheaper than the ones I have owned before. The silver of the insert will not fully close the lighter because it will not fully flush with the bottom. The metal is thinner than it used to be, and it is not brass like the listing says. I am very disappointed in the lower quality that is being produced by Zippo.

👤I bought this hoping it wouldn't have the same issue I had when I bought one from acutal. I got it a few days ago. I opened and closed the lighter lid a few times to make sure it was in line with the body. I put in another insert after taking out the insert, but when I tried to close the lid it was not straight, and I had to push hard to get it to close. The lid is not aligned in the photo. The lid is catching on the wheel. I put the original insert back in. I made sure I got the correct case for the insert, I don't know why this happened. The bottom of the case said "Zippo". There is a I will be returning it.

👤The bottom line is no. Don't do it. There is a A lot of Vietnam-era infantry I bought a Zippo. It served me well for a long time and deserved its reputation for quality. There is a These aren't the same as the Zippos. I wonder why they didn't have it in a case like all the other Zippos I've come across... I think I know. The info on the Amazon page says that it doesn't fit slim or 1935 replica cases. I wanted to swap out the lighters that come in them with the ones that come in the inserts, so I bought two of them. I checked to make sure it was not one of the "Slim" or "1934" model cases and that it was the same size as a regular lighter case. It's not the case, and we owe it to you to make it clear in the description. There is a The case will not close because the Zippo 65826 fits in the case. Trying to make it close is a sign that it won't work for this or the regular lighter that comes with it. I had to open the Yellow case and try to close it again on the lighter that came in it, but it bent to the point that it wouldn't close again. There is a I am 1 for 2 with having the model that comes in these lighters being unusable as a result of simply opening the top of the lighter, and the Zippo 65826 won't fit in a "regular" Zippo case. I'll dig through my footlocker to find my old car. Maybe it will work with the Zippo. I'll go to eBay if that's the case. There is a It's fair to say that these are made in China and that Zippo is up front about it. I own and use a lot of Chinese products that are very good. I have noted that a lot of hardware, fasteners and other products are just enough "off" from U.S.-produced versions to make the fit not quite correct. It's rarely off by a lot, but enough that holes that should line up exactly, don't; or bolts that should take U.S. spec nuts/bolts don't do so reliably. I don't know how to explain it. Maybe they're using equipment built for metric production, adjusting it to produce U.S.-spec products and it just doesn't translate well? The lighters are not off a lot, just enough to not be as interchangeable as Zippo claims. I will not buy another product from the company.

3. Zippo 29889 Lighter

Zippo 29889 Lighter

Fuel: The lighter fluid is sold separately. A genuine Zippo lighter with a distinctive click. All metal construction works. For optimum performance, they recommend genuine Zippo premium lighter fluid, flints, and wicks. It's made in the USA and has a lifetime guarantee that it will work or be fixed free. Fuel: The lighter fluid is sold separately.

Brand: Zippo

👤I bought this on February 24th and now on October 21st. The painted mural on the front is starting to chip off. This lighter has only been used a few times and is mostly on my desk. I'm not happy that the paint only lasted a year and a half when they said their lighters are capable of surviving 50 years and more. This product has great artwork and a great finish. The sides are polished to a shine and the front and back are a nice matt finish. The texture of the artwork adds to the feel of the lighter. This lighter has a long life ahead of it. I have no issues with it, it's just a loose hinge. After the photos, I swapped my traditional flint and wick insert for a butane insert. I highly recommend this!

👤I read all the reviews about zippo lighters and thought I would buy one of my own. I wouldn't have to keep buying cheap ones from the store. There is a The insert is a nice lighter. It takes a while to light up because the lighter fluid I am using isn't zippo lighter fluid, but it's fine because once it's lit it's good to go. The whole selling point of the product is disappointing. The warming label left a mark that I can't get off and it came with scratches. I am very disappointed that the back is not glossy and clean, but it does have a large mark and scratches. Very disappointed. It was expected to be better from zippo. The aesthetic is ruined. It was damaged and marked.

👤There is an update. My husband took a lighter. The dealer says the reason lighters don't work is because of the copper in the wicks. These lighters are not legit. He bought the one that worked. It's a pity. The zippo is good for its case. I gave it to my husband for his birthday and I am really disappointed. I was excited for him until he filled it with lighter fluid and it didn't work. He thinks it needs a flint. I hope I can find a lighter that he will be able to use. I am really sad.

👤30 minutes ago, I opened the package and took the lighter out of the box. The plates with the beetle fell off when I opened and closed the lighter TWICE. They used cheap glue and paste to attach them to the lighter. Not welded, soldered, or super glue. I will probably never order from them again after I was disappointed in stealth rabbit. I'm going to try to get a refund.

👤I left it in my bookbag for less than a week. Went to use it for the first time and the light fluid was already evaporated. You will have to fill it everyday because it is not sealed.

👤A great lighter. The graphics are just as hardy as the color. Since purchasing and still good as new, photo has been carried around in jeans and heavy outdoor work for quite a while. Will be buying a different graphic.

4. Zippo 151 Spectrum Pocket Lighter

Zippo 151 Spectrum Pocket Lighter

The flint screw tool is in the store. A genuine Zippo lighter with a distinctive click. All metal construction works. For optimum performance, they recommend genuine Zippo premium lighter fluid, flints, and wicks. It's made in the USA and has a lifetime guarantee that it will work or be fixed free. Fuel: The lighter fluid is sold separately.

Brand: Zippo

👤A great zippo. Exactly what you would expect. The colors on the spectrum can only be seen in sunlight or under direct light. Not as bright as pictured, but more unique than a chrome zippo. This does not come with lighter fluid. There is no fluid in it. The authentic Zippo brand fluid is better for buying lighter fluid. I don't work for the company. I found it to work best with the lighters. If you're new to zippo, you have to fill your lighter up every 1-2 weeks, depending on how much you use it. That's how they are. Clean the flint and the wick every so often. If you don't want to deal with that, you can buy an electric lighter insert. Zippo's are more about appearance and style than anything else. When filling it up, don't fill it all the way to the point where the cotton balls are soaked in fuel and it's dripping everywhere. A fire needs a spark, oxygen and something to start. If the chimney is filled with lighter fluid, it will be hard to get a consistent light from it. If you fill it up every 2 weeks, it will be half full. Enjoy your new lighter!

👤It's a toy. You have to treat it like a car. It needs flint changes and needs to be filled with fluid almost every day if you use it a lot. If you are looking at the rainbow version because you are a stoner, I recommend the pipe version as it does not do pipes or pagannalia very well and might even taste like butane. There is a I use it for its main purpose, and it works just as well as any of the other ones. Very well. A good warranty too.

👤This is my first ride. Most people use disposable lighters if they are all like this. You have to make sure you order the zippo lighter fluid because it doesn't come filled. It doesn't work most of the time after filling it. The only way I was able to work for a week without filling it was to drench it. I have had to reach for my box even though I dislike using disposable things because it has never worked consistently. I love the look and feel of it in my hand, so it is a shame. Maybe the cheaper zippos don't work well. I don't know. I know from the videos that I filled it correctly, but it hasn't been reliable.

👤Let's be clear, a Zippo is a Zippo. You pick one based on how great it looks and how much it matches your personality. The "Chameleon" Zippo is a green-tinted mirror finish. I haven't seen anything other than green tint. Maybe I got a dud. I attached my pics with my brushed chrome scythe against a few surfaces. There is a It's a mirrored lime green. - It should be named that. If you want a shade of green that is subtle and awesome, this is the one for you. If my opinion of the lighter changes changes, I'll update this.

5. Zippo Tree Life Pocket Lighter

Zippo Tree Life Pocket Lighter

Fuel: The lighter fluid is sold separately. A genuine Zippo lighter with a distinctive click. All metal construction works. For optimum performance, they recommend genuine Zippo premium lighter fluid, flints, and wicks. Lifetime guarantee that "it works or they fix it free", made in USA. Fuel: The lighter fluid is sold separately.

Brand: Zippo

👤I really like this lighter. The tree of life is something I enjoy. There is a There is a word of warning. I bought the holster along with the one I bought directly from Amazon so I could protect it from being scratched. The finish began to come off within 3 weeks. I don't mind it at all. It makes the tree of life stand out more, and I think it will last longer because it will get a natural patina on it. I like flat or dull colors. This works for me. There is a Don't expect the finish to last for those that want it.

👤I got this necklace for my girlfriend about 5 years ago. When I saw this, I immediately sent for it, and it feels like I have a reminder of her in me all the time. It's appropriate for a man or a woman. It will last forever or they'll fix it for you.

👤I liked the coating they used on the Antique Brass Zippo, but I love the brass metal underneath. I rubbed the sides of the lighter after use and noticed that the coating fell away. I removed the insert and used a small scrubbing pad to remove the coating which was peeling off and ended up with a very appealing Zippo with the engraved Tree of Life still there. The brass was exposed. The metal underneath is much better than the peeling coating.

👤I opened my package and the lighter with a nice presentation. The lighter looked smaller than the standard one. Maybe they have shrunk them over the years. I haven't owned one in a while. I bought the butane double torch insert to replace the standard Zippo lighter. It wasn't right. It would slide in, but not far enough to close the lighter. The Armor one was a couple millimeters shorter than the standard one. If you plan on using a butane insert with this one, don't buy it. I'm pretty sure it's a fine lighter.

👤I tried to take as many pictures of the lighter as I could to show people that the lighter is worth the price. The lighter is expensive but it is well made and I like the print. It is a good product for a good price and it is easy to make some tricks with it.

👤I am slightly disappointed. On the other hand, I like the way it looks, sounds, and feels, but not as much as performance would suggest. Part of this is my inexperience with this style of lighter, and part of it is my unrealistic expectation that the wind will never prevent the lighter from lightning. I think it will work better over time, but I am not in love with it. I still keep a Bic handy as a backup.

👤The issue with the finish is too bad to give this 5 stars. I don't care, the lighter looks cooler as it gets more beat up, but the paint comes off in 3 weeks. I keep nothing else in that pocket but a brass lighter with a cool design. If it were just sold as brass, I would give it 5 stars.

6. Zippo Butane Fuel 42 Gram

Zippo Butane Fuel 42 Gram

The calf sizes are between 12 and 16 inches in width and 7 to 8 inches in height. The ultimate motorcycle accessory. For both men and women. The ounces are 42 grams. Flex necks, candle lighters, outdoor utility lighters are used. For use with butane torches.

Brand: Zippo

👤I'm not sure if the can I received was actually butane. One of the lighters had a small amount of butane in it and the other was empty. Maybe that was the problem with the torch lighters. They never lit again after I put this fuel in them. I'll never use this fuel again, even though both lighters were very expensive. There is an edit. This is embarrassing. I'm changing my rating and review but leaving my old review here as a cautionary tale about hot takes. My lighters have a screw. You can get more or less gas by turning the screw. The screw was turned more or less all the way down. It must have happened when I put new fuel in them. I thought the lighters were malfunctioning, but as I was going to junk them, I found a screw and they light up now. It works well after all. My bad.

👤What more can you ask for? A great American brand is making a product. It is made very well and works well, the nozzle seats correctly, and you feel confident using it. There is a If you need a refill for Butane, you can get one for $3.44 and it's 2.75 ounces. If you enjoy my review, please click the button.

👤A tiny can of gas for six dollars is a blatant ripoff. "78 grams" of butane is not very much to me. My mistake in buying from these people was that you can get a 5.8 ounce can from Walmart for only $6.

👤Amazon suggested butane for the torch.

👤This design has never been improved since it was first made and it's time for a tech refresh. The tendency to leak when filling is something that needs to be fixed. The self-sealing Silicone rubber tip could be used instead of the hard plastic fill adapters. 15-20% of the fuel is wasted each time it is used because the technology is sloppy. Since they are not compelled to do better by consumers, manufacturers don't care and won't do anything unless someone is injured or consumers abandon shoddy products. The transportation industries are known for only remediating dangerous products after being compelled by the government. The design and safety criteria will never improve until the industry is shamed into improving it. Our government doesn't protect consumers' safety and won't force industry to improve until after consumers are injured or there is a loss of life. There is a The transportation industry looks at the relative cost to compensate victims of aircraft and car crashes against the cost of reducing specific KNOWN risk factors, which leaves the unknown risks that represent a significant proportion of overall risk factors. In most cases, this is a logical and effective process; however, being subject to human error, there is always a likelihood of a person of responsibility making the wrong decision. It is obvious that using a decision-support methodology that is inclusive of multiple team members composed of stakeholders increases the likelihood of project success. It's important that safety is promoted and enforced as it's difficult to live with it. On it.

7. Zippo Black Lighter Pipe Insert

Zippo Black Lighter Pipe Insert

Fuel: The lighter fuel is sold separately. The Genuine Zippo lighter has a distinctive "click" and comes with a standard and pipe insert. The Windproof design works virtually anywhere. For optimum performance, they recommend genuine Zippo premium fuel, flints, and wicks. Lifetime guarantee that "it works or they fix it for free" Fuel: The lighter fuel is sold separately.

Brand: Zippo

👤My life story is about fire. I had a lighter with me. I was 7. I loved fire because it's warm and pretty. The zippo can was open and I was like, "Woah." I lit a pile of sticks on the road pavement with a zip lighter after pouring some zip. You won't believe what happened when I lit the zippo fluid on fire. I was scared after the fire grenade exploded in my face, but minutes later I realized I had created fire with this beautiful zippo lighter fluid. I went to feed the fire after I was amazed at what I had accomplished. The fire was taller than me and it almost reached the branches of the trees. I told my family about the fire, but they didn't realize it. When my mother and father saw faces, they both ran back inside to get water and my father called the fire department. I was filled with fear as I realized what I had just done and my excitement began to leave. The fire had reached the tress that reach toward the skies before I went with my mother to get some water. My parents were horrified when they told me to get my most important belongings and I came out with my lighter. We went away from our house because we could still see the hour house. The next house was half a mile away from where we lived. My parents asked what had happened as we were outside, and I only said that it was fire. The fire department came and shot the entire house down with water and they were able to stop the fire before it spread. I am at home with the same zippo fuel and I am going to wonder what will happen now. My point of the story is that if you mess with this product, you might get screwed, and that the Zippo is a bad ass, so don't mess with it. I hope you enjoy my story.

👤I think this is one of the best deals that Zippo has. There is a The finish is high-gloss that is supposed to be black, but it gives off so much reflection that it doesn't look black. Is Black Mirror something I should say? There is a I was impressed. I have another pipe that works well, even though I did not initiate the pipe insert. I would recommend anyone to have a pipe and a regular one. There is a You won't regret it with this set. You may not be able to stop with this Zippo, but you can start your own collection.

👤I am loving this product. It was odd that I had to buy this as an insert, but it fit right into the liquid fuel version I already bought and it was better. You don't need the multi-adaptor canister if you use the standard gas nozzle.

👤I don't know how to use it. It is a gift for a friend. I want to use a laser machine to make an icon on the lighter shell. The shell is too thin to make a gift for my friend. It's too smooth to do UV print. I give it to my friend. I am surprised that my friend told me. He wants to buy it before. He asked me how I knew he liked this one. I think this color looks nice and the design looks simpler. This is a good choice if you want to buy a gift for a guy who likes lighters.

8. Zippo 121503 Fuel Canister

Zippo 121503 Fuel Canister

The clam shell packaging is made in the USA. High quality aluminum. A slip and split key ring is needed. Protects fuel from oxidation. Quickly loosen lighter flint screws. The flint screw tool is in the store.

Brand: Zippo

👤I use this to carry some spare fuel for my lighter and hand warmer. The good first. This is a sturdy item that can hold a lot of liquid fuel to refill your item. It doesn't leak, the cap stays securely attached, and the ring on the top makes it easy to keep it accessible. There is a I gave it three stars because it was not all good news. I can't get it to fit the spout cap. I don't know if there is a vent hole missing or what the issue is, but I have to take the spout off of the canister to pour out the fuel. Fuel spilling everywhere, especially when trying to add fuel to my hand warmer, is a result of that. I need to fiddle with this to see if I can figure out a way to make it work, but in the meantime I just keep it around as an emergency backup supply of fuel. I tried to use the container over the weekend but it was not usable and I decided to change it. I carefully widened the hole in the pour spout and the breather hole after taking a few small drill bits. The fuel was poured from the container after that was done. The mod took less than 5 minutes to complete. It was easy to do since the container is aluminum. When I bought this item, I was expecting it to do well.

👤If you have them in kits, please test them frequently. There is a If you have zippos in your kits, these are necessary items and I knew to add them to the order. Six weeks ago, I bought two refill canisters and put them in semi rigid cases in my closet. When the lighters were empty, I opened these to refill them, and wanted to know how much they carried. Imagine my horror when the entire upper chamber came apart, spilling all the fluid. The fluid only used a few small items that will be replaced. This is a majority safety flaw, and it would cause you to lose fuel in the field, and also cause other gear to be soaked with lighter fluid. If you have a fire safety issue with your backup Bic or matches, it's because of the result. This is not a biased review. I know there is no chance of a refunds for these add-on items. This review is not influenced by a potential refund justification, only a desire to warn others, and sometimes I question the long negatives from non super-contributors. They were purchased from Amazon and no one was concerned about them being knock-offs. I hope I got some bad items. I want you to open these when you are testing other items.

👤The concept is great, but too much is happening on the top of the canister. The "split ring" can't handle it. I lost a flint, rubber holder, andthumb nail when she opened it. The larger area for the key ring that comes with the canister and a swival would be all that is needed. The canister is leaking. Losing fuel like other people. I will be looking for a little thicker washer. I wanted to have a small unit for fuel emergencies, but it was too bad. If the backup canister can't hold fuel, I'd use a BIC. To light a cigar? Do you keep in my bag? Lighter fluid is more versatile. If a solution is found, will try to update. I think I may have found a solution. It was sold by pphish. I bought a mini set of fuel canisters and peanut lighters. The canister is just what it says on the tin, it holds the fluid with no leaks. The peanut lighter is an added bonus for me. I think it's made by ZORRO. Not a bad choice. There is a listing of my review.

9. Zippo Polish Brass Pocket Lighter

Zippo Polish Brass Pocket Lighter

Fuel: The lighter fuel is sold separately. A genuine Zippo lighter with a distinctive click. The Windproof design works virtually anywhere. For optimum performance, they recommend genuine Zippo premium lighter fluid, flints, and wicks. Lifetime guarantee that "it works or they fix it free" Fuel: The lighter fluid is sold separately.

Brand: Zippo

👤I carry the Zippo Armored Brass lighter with me every day, and it's been about six or seven months since I got it. I like that it has developed a fine tarnished patina, which gives it a vintage appearance, from riding in my pocket and handling the original high polished shiny brass finish. I like packing it in my pocket because it doesn't get used much. I use it every Sunday night when I smoke a cigar. I'm not a cigar snob and the Zippo always gets the job done, so I'm not sure if true cigar aficionados would be interested in lighting a fine cigar with anything other than a stick match. I lent it to the concrete worker who is helping me pour a parking pad and who is cutting me a helluva deal on the project. He asked me if I had a match the first time, and I guess you could call him a chain smoker. When I handed him my Zippo, he started to reminisce about when he was in the Army and how he used to have a Zippo. He carried my lighter for most of the day. He liked it. I thought I'd get him a Zippo just like it, because he liked it so much and he used it so often. When we dump the mud in the hole on Wednesday, I think I'll have it for him.

👤There is no reason to buy brass zippo with high polish. Why? Look at my pictures. There is a The older high polished was purchased in December. The newer in April. Wear happens. You can see the difference. There is a There is a feeling. The armor is more solid and heavier than the standard. There is a If you're looking for a brass model, you can save $3.

👤If you've only ever used disposable lighters, there's a slight learning curve. The flame is strong in windy weather. I refill the fluid weekly. You will need to trim the wick with needle-nose wire cutters. You'll need to take the whole thing apart to replace the flint. There is a It's a well-crafted, classy-looking, fun-to-use, eco-friendly lighter from a company with excellent customer service.

👤I was looking for a cheap lighter that was better quality than dollar store lighters, and I found one that looked sleek. There is a I was surprised at how much I love this lighter. I'm a non-smoker and sometimes need a fire starter or a rope to burn, but this lighter does the trick. There is a TheBrass version seems to have tighter seals, meaning less evaporation, and it looks sleek and satisfying to play with. There's a flint/wick/fluid bundle for $8 on Amazon which is fantastic.

👤I have owned many different styles of Zippo over the past 30 years and I have always believed that the Solid Brass Zippo is the most reliable lighter. I don't know why being solid brass makes a difference, but the solid brass lighter doesn't feel as cheap as other lighters in the line. The solid brass Zippo has a better feel to it when rolled. I've had problems with other non-brass Zippos being less than 100% when it comes to lighting. I don't know why there is a difference, but for me it has been. I prefer Solid Brass Zippo or bust. Unless someone can show me a non-solid brass one that can perform as well, this is the only lighter I will buy.

10. Zippo Polish Chrome Pocket Lighter

Zippo Polish Chrome Pocket Lighter

A genuine Zippo lighter with a distinctive click. The Windproof design works virtually anywhere. For optimum performance, they recommend genuine Zippo premium lighter fluid, flints, and wicks. Lifetime guarantee that "it works or they fix it free" Fuel: The lighter fluid is sold separately.

Brand: Zippo

👤It's a good quality lighter with a distinctive "tink" on opening. The old adage "they don't make them like they used to" comes to mind when I think of this. I bought this one because I didn't want to lose the 45 year old lighter that I have. It is not the same quality. It's close, but it's like they use metal that is a bit thinner so the lighter has more flexibility in the body. The flame guard stops when the lid hits it. It doesn't feel as strong as the old one. There is a I will be looking in the local second hand shops for used Zippos. The prices are good if you stay away from the dealers who cater to "collectors". You can buy an old lighter for less than a new one and it will be more solid.

👤The 1984 High Polish Chrome Venetian Zippo that I ordered a replacement for had the hinge separated from the lid after many decades of daily use. I could tell it wasn't the same quality when I touched it. The pattern was laser etched. The metal is almost half the thickness and is covered in brass. It feels cheap and light in the hand. I don't think it will last 10 years, let alone 35 years like it's predecessor did. There is a The other reviewers are correct. The synthetic wadding does not hold as much butane as the heavy-packed felt of Zippos, but it is still a loose and fluffy synthetic material. It takes two days of use out of it before you need to refill it. I noticed the same problem with another Zippo. It's not a bad lighter. It's a lighter. It functions and serves it's purpose and still looks good, even if not of the same quality and construction as it's predecessors from the past. If you haven't owned a classic Zippo before, you'll like this purchase. If you're like me, and have owned a classic Zippo before, then you should skip this item, even if it's the exact same model, and go for something else.

👤I am a big fan of Zippo. I was delighted to order this Street Chrome Zippo to replace an older one. When I went to fill the barrel, I was suspicious because the felt pad made a large shape into the barrel and the scree was sticking up more than usual. The felt pad underneath the lighter was not filled with rayon. I tried to find a "contact seller" option in my listing, but it was only return or replace. I didn't return it because I needed the lighter, but I stuffed my own extra filling into the barrel. I have never had a better quality Zippo.

👤I had a lighter when I was a teenager. I don't know why I discarded it. Maybe it has the same problem. It doesn't hold fuel for more than a day. I bought it. I have one that I can use to light my stove and start campfires. I'll use regular disposable from now on. They are more reliable.

11. Zippo Butane Lighter Insert Double

Zippo Butane Lighter Insert Double

A genuine single torch insert. The flame height is adjusted to 2,300F/ 1,260C. It can be reloaded with butane fuel. Does not fit Slim, Armor, or 1935 replica cases. The famous "click" sound is retained.

Brand: Zippo

👤The twin flame has a spark problem. It would take me one in ten tries to light it. The problem is that the electrode is not bent enough down to jump to the other side, instead it arcs backwards and away from the flame. The solution is very easy. Use a TINY bit to bend the electrode towards the opposite wall. I did this and my lights worked the whole time.

👤I have a torch insert. There is a My friend and I both bought them. The piece of metal used for the spark is centered between the two jets. It takes a lot of tries to get it to light up. We solved this by bending the little electrode towards one of the Jets. It lights 3 out of 4 times. I expected more from the zippo company.

👤The inserts are made in China, but they are not "Made to Zippo Quality". My first one worked well. I filled it with butane and it worked for a few days, then it stopped and I filled it again. I turned the adjustment screw on the bottom to make the flame bigger, and it produced the same flame as before. I had to keep adjusting the screw higher and higher until it reached its maximum. I exchanged it for the same item. That one was great! The first fill up with butane from Zippo worked well and lasted longer than all the others. You can hear butane flowing and see the spark from the ignitor, but it won't light. Trying to turn the adjustment screw. It won't budge, it's almost as if it got Torqued down too much in the factory. The product idea is great, but the quality control is terrible.

👤I was not a fan of the lighter fluid cotton balls that zippos normally come with. I carry a zippo for cool and calm because I am not a smoker. I use it once in a blue moon. I had to cut a length of paracord for a camping trip, but when I melted the tip to keep it from unraveling, the cotton balls dried out. The answer is this, a self contained pressurized butane torch insert. It doesn't work when I slip it into my zippo. It would light up once every 5 or 6 clicks after I clicked. After reading other reviews, I realized that this seems to be a common problem and that I should return the product. The butane had to be light up because the electrode tip had to bend towards one of the jets. If you lightly press on the igniter for a split second before pressing, you can get a consistent ignition. I have a functional tool after doing all that. It doesn't match my zippo.

👤If your ignitor is hard to light, it's important to have a note on it. I bought dual torch inserts for my two favorite brands. I immediately filled it and installed it, then went to light a cigar. It took a few clicks to light it up. I assumed it was because I just filled it. I was wrong. Sometimes it was difficult to take 10 or more tries. The spark was going back to the top edge of the insert case because the small ignitor electrode above the torch outlets was pointing vertically. I realized the problem when I opened the second insert and saw that the electrode was bent over the torch outlets. I bent the wrong one down gently with my finger and it started to ignite at one of the outlets. I was disappointed when I was able to fix the problem. These work as I had hoped. I can finally use my bongs for cigars. There is a In the photo, I bent down to match the way the brand new, never used one is, on the right side of the case. I did not take a before picture. I will not bend it back the way it was and risk breaking it for a photo.

Summary

What is the best product for zippo bicycle lighter?

Zippo bicycle lighter products from Zippo. In this article about zippo bicycle lighter you can see why people choose the product. [brand2] and [brand3] are also good brands to look for when you are finding zippo bicycle lighter.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com