Best Vertical Bicycle Stand

Stand 16 Aug 2022 10+ Comments Open

1. WALMANN Parking Garage Storage Outdoor

WALMANN Parking Garage Storage Outdoor

Their hooks are coated and welded to protect your bikes from scratches. It's time to say goodbye to your worries about bike damage or potential collapses. The bike organization. If you don't want to hang your bikes, this floor bike rack is for you. The bike floor stand will keep bikes upright in the garage, it doesn't have to face the bikes in different directions. This looks like it will work to condense the space their bikes take up in the garage. The bike stand rack is made of premium square steel tubing and round steel tubing. The tire width is 2.15. The bike floor stand is made of strong and sturdy steel. It has a powder-coated black finish that resists rusting. It is more sturdy than the snap-together design ones and will not tip over. Installation is easy with the bike stand for garage. The bike floor rack should be mounted to a wall. The bikes fit well both facing front. When the wheels are in the bike rack, be careful with the disc brakes. There is an after-sale service. They offer a 2 years warranty and 24 hours e-mail service support, if you are not happy with the bike stand floor, just send an email to them and they will give you a 100% no question asked return or replacement. Place the order now!

Brand: Walmann

👤Since it was affordable, I took a chance with it, but there are some major design issues. The two separate racks are too close together to put two bikes on the same side. 2. Each rack has a screw on it. It is side to side. The stand is not stable and the bike is unstable. 3. It must be bolted to something to work. It can't work without being attached to the wall or floor.

👤It works perfectly for the price, you can make it permanent, or you can take it with you.

👤My bike spokes touch it, which is the only disadvantage to this stand. I don't think this will make a difference over time, but if I had thought it through, I would have bought something different. I have only one bike and this is a handy size.

👤It's cheap but does what it's supposed to do. Overall a good purchase.

👤It works in a pinch. It isn't enough weight or height to safely rack a bike, it's unstable and at some point I'm sure the bike will tip.

👤The bike leans on the spokes of the stand if it isn't mounted to the floor. The product is called Mediocre.

2. Dirza Bike Wall Mount Rack

Dirza Bike Wall Mount Rack

Lifetime warranty is provided by them and they stand behind their product. If you don't like it, just return and they will give you a full refund. TIRE TRAY: The tire tray on the wall mount bike rack keeps the wall clean and makes the bikes look better. The bike hanger is easy to install. The bike storage system is suitable for any size of stud, because of the straight line screw mounting holes. The space saver is located in the middle of the room. If you want to keep your garage clean and tidy, you can get the bike off the floor by using their bike hanger which is great for apartments, garage, indoor and small room. The wall mount bike storage system is not compatible with bicycles with tire width over 2.5" Strong and safe. The bike hook is made of heavy duty iron and weighs up to 1.25 lbs per unit, which means it won't bend and last forever. The bike holder has an excellent suspension capacity with a single bike holder bearing up to 65 lbs. The unique safety hook design makes it hard to accidentally release the bike, but it's easy to store and detach the bike. High quality. The garage bike rack has a rubber cover on it to protect the bicycle wheel from being scratched. The design of theangled hook makes it easy to hang and take off the bike, but also uses the force of the wall to diffuse the pressure of the bike wheel. Good service. They are behind their products. The bike is built to last. Their service team can help their customers. You can contact them if you have a question. They're happy to help. The bike storage system needs to be installed on a concrete wall or a stud behind it.

Brand: Dirza

👤These are pretty good for the price. They are keeping my wall clean. There is some work involved in using these. The ones that came with the set did not work, so you will probably need some other anchors. I don't know if they are the right size or if the screws are too short to split the anchor so it will grab, but the top two pulled out of the wall as soon as I tried to put any weight on it. I ended up hitting the studs. There is a If these are going into a tight area, I wouldn't recommend them. The bike comes off to the right, but you have to push the bike so far to the left that you can't get the wheel off the hook. I have a bike that hangs 16" apart and I have to move it to the right to get it off the hook. That is annoying. We had to move them from the spot that we originally wanted to put them so that we would have more room to maneuver the bikes. There is a The mountain bike didn't fit. It wasn't that the tire was too wide, but that the tire and rim were too thick. I had to bend the hook to get the wheel over the tray. It would be fine if there was a bit of play so that the bike didn't rest as straight or as soft as the other bike. These are decent hangers. The price is great, but it depends on how many bikes you have, where you want to store them, and what kind of tires you have.

👤We painted the pine board white and it was easy to install. I screwed the pine board into the studs with 2.5” screws. The bicycle hooks were screwed into the studs. I did not use the wall anchors. I wouldn't use the anchors to affix the bike hooks. The bicycles are heavy and I wouldn't trust wall anchors in dry wall. The set up is very sturdy and very small.

👤If you want to keep your walls protected, then this is the set for you. I got two of them and they were installed in minutes. It's a tip. It's a good idea to hang the top one first and then set the bike in the top hanger to make it a perfect fit for your bike.

👤I've had this for a while. The bullet point is easy to install. You don't need directions, but you have to measure distances between hooks and plates. That can be a drag. It all depends on how much space you have. The wall anchor screws don't work. Go to the hardware store and buy the nice anchors. It could cost you an additional $3-$6. There is a The construction is good. Take notice. The hook plate is too short for me. I have a lot of bikes. All of them have 700c wheels. The hook plate is touching the wall. When the tire is deflated, the wheel contacts the wall even more. It is not an issue if you don't care about it. This product failed because it was one of the reasons I got this. There is a This is a good product, but the bullet point is above.

3. Folding Parking Bicycle Holder Storage

Folding Parking Bicycle Holder Storage

A life time warranty on top quality. It was made in Taiwan. The product weight is 1.96 kilograms. 4.35 lbs. Saving storage when not in use or to carry it into the car when going riding with a Traveling Bag and foldable. Your bikes will not be lying on the ground anymore. The bike's front rear wheel is much deeper than others, so it stays firmly in the holder. The dual arm is better for heavy bikes. The corner of your bike has a coating on it to protect it from nicks and scratches. The arm is spring loaded so it is easy to hold the wheel. The bike holder is portable and lightweight, it only weighs 3.5 lbs. If you are not satisfied with their products, they will give you a full refund. If you are not satisfied with their products, they will give you a full refund.

Brand: Auwey

👤The stand has legs that can be folded. That sounds great. It is a flaw. When the stand is on the floor it causes instability because the legs fold back a little. It is too light. The first flaw is worsened by it moving easily. I returned it because it was so bad. I have similar floor bike stands that are more expensive but worth it.

👤The bike stand is supposed to hold the bike so it stays upright, but the legs on the base tend to fold inward, which causes it to lean and eventually fall down. The stand is67531 in the garage next to the cars, so it is67531 in a more open area.

👤I bought 4 of these and am planning to buy 1 more, so there's more good than bad. There is a They are easy to transport and hold the bikes well. There is a The only negative thing: The units can slide on the floor of the garage and cause the arms on the side of the units to try and fold. Not enough bikes will tip. It does diminish security. While loading it can move relative to the arms which have grippy bits on the ends because there are no grippy bits on the center structure. The center member is moving forward with his arms. My children find this frustrating. Adding a locking detent would probably prevent sliding. I don't recall if the legs are held with screws or rivets, but if they are, it could be a place for a smaller person to step to prevent forward motion.

👤I have been using this stand in my apartment room. After 7 days, I can say that this item is 5 star quality. There is a There is value. Stable. The feet are soft to protect the bike. I don't own a work stand. I can work on my bike infinitely easier with this floor mount. 5 stars will buy again.

👤My wife's Cannondale has 26" wheels and this is working great. It wouldn't work for my Trek tires, which are just to fat. I would get another bike if I needed one.

👤I tried a Delta stand that was a bit different. This is a replacement. It seems like a good stand after saving some money. There is a small wobble in the parked bike, but nothing that concerns me. I know they're decent and will be ordering another one. The product is good at a good price.

👤It works well and it's a fair price. This product is very good and I would highly recommend it. I think it's a good idea to include instructions, because those not overly mechanical might find folding the stand a challenge.

👤If you push forward on the bike, the legs will collapse and you will have to pit the bike in the cradle. It works for a hallway or garage.

4. Steadyrack Classic Rack 2 Pack

Steadyrack Classic Rack 2 Pack

Good service. They are behind their products. The bike is built to last. Their service team can help their customers. You can contact them if you have a question. They're happy to help. The bike storage system needs to be installed on a concrete wall or a stud behind it. Their racks are built to last and can hold up to 35 kilograms. Lifting the bike into the rack requires heavy lifting, but it is easy to balance the bike on its rear wheel. Their racks have a 160 degree pivot feature that saves space. FENDER / GUARD? This bike rack is not suitable for bikes with mudguards. You can check out the Steadyrack Fender Rack. The maximum tire width is 2.1′′ and the recommended wheel diameter is 29′′.

Brand: Steadyrack

👤I had taken up too much space in my garage and bought the two pack for two road bikes and the separate fender pack for two cars. Prime shipping was fast and these were shipped via UPS. The packaging was easy to open with a box cutter. I've been following this company since they were a project. When I received their product, I knew what to expect. A lot of thought has been put into everything from the design to the packaging to the website and so on. You need a box cutter, a tape measure, a pencil, a Philips screwdriver, a spirit level, a 13mm sockets, and the instructions call for a 10mm and a 8mm drill bits, but I used a small drill and a small screwdriver. I bought a stud finder from Amazon to make sure I got my holes right. Steady rack has an excellent installation video on their website, but their instructions are very clear and use metric and imperial measurements. The Steadyrack must be mounted into framing studs or masonry in order for the warranty to be valid. Fix the Steadyrack by hand. Installation took about 10 minutes. There is a This is a high quality item that is worth the price paid and I think it will last many years. It frees up valuable space, holds the bike without damaging it or putting stress on it, and is very easy to load/unload. Excellent customer service and a 100% product backing is what this company is known for.

👤When something goes wrong, I judge a company by their actions. I contacted the support line because my box was missing hanging hardware. Someone answered within the first ring. She referred me to a person in the USA. Mark shipped me the hanging hardware the next morning after I sent an email at 10pm. There were no questions about "proof of purchase", "serials numbers" or "hassles". "Just a very human apology... and swift action!" Oh yes. I love the product as well. I was looking for high quality. I'm thinking about sending my resume to SteadyRack. It's a good thing.

👤We had a handyman install because we aren't good at that type of work, and he seemed to have no problems. The garage is a bit roomier because it is holding our bikes. Definitely strong. It's not as easy to put the bike up as the video shows, but taking it off is easy. You can move the rack so it's closer to the wall. I want a cover to keep the bikes from getting dusty. It does collect dust because we don't ride ours often. We use plastic on it and it works. I was very pleased with the purchase. It is definitely worth the price.

5. HumanCentric Vertical Adjustable MacBook Organize

HumanCentric Vertical Adjustable MacBook Organize

Koova's Bike Hooks are made to last and protect your bikes. They offer a lifetime satisfaction guarantee. They will repair, replace or refund your money if you are not happy with a product. If you want to maximize your workspace, connect an external monitor, keyboard and mouse to your laptop, then dock it to save space and protect it from spills. The vertical laptop stand is easy to fit, it automatically grips the laptop when it is placed into the stand. Most laptops and Macbooks are up to 1 inch in thickness. A vertical laptop stand made of aluminum with a gray finish is a sleek and minimalist design that is both functional and space-saving. Sturdy and hardy. Silicone pads are used to grip your laptop or Macbook, rubber feet are used to keep it in place, and scratch-resistant material is used. It looks great. If you have a problem with your stand, send it back to them.

Brand: Humancentric

👤I was looking for a stand that would allow me to close my computer and hide it behind a monitor. Looking for in purchase: Sturdy, value, well constructed, clean lines, and a color match to the MacBook. There is a The design is simple and sleek. It has rubber padding. The weight of the laptop closes the top and secures it. It looks a bit lighter than the space grey MacBook, but I could be picky. The lines and design are sleek and it looks great in the setup of my desk. The stand will loosen if there is movement in the laptop. There are some rub marks on the computer case from the pad. The stand cost 29.99 and was a gift, but it was a good one. It is not perfect, but it is the closet to perfect that I have found yet. I have to give it a boost for the way it loosens and the rub on the computer, so only 4 stars, but that is better than anything else I have found. I love the stand and I don't think I will find anything better. I have already recommended it to three people and I recommend it to you as well.

👤The idea for these and the video convinced me to buy them for my wife and I. I found that they weren't as advertised. If you have an external case on your MacBook Pro, you run the risk of the pressure point being too wide for the arms to adequately "pinch" the sides of the laptop, which in turn will cause the laptop to "sag" to one side. There is a The stand didn't have a good grasp of the laptop like I had expected from the video, even with the thinner cases. I don't know if these work better with the 13" MBP and 11" MacBook Air models. I think these are some basic physics that make heavier laptops less suited for use with these stands.

👤I've been looking for a stand that works for a 16 MB pro. Many of you saw that this product had high reviews. My question is how? The item wasn't in one piece when I got it. The 2 plastic edge pieces were not connected, but it was relatively easy to figure it out after some fiddling with it. The stand is very light and matches the Macbook color very well. It is flimsy. It has a huge opening. You could fit a bible in there. There is a lot of room for your laptop. It doesn't hold the laptop securely. This is completely loose and you don't want a tight fit. Your laptop leans back in this stand. If you look at my video, you can see that if the laptop leans too far back, it will just fall over, and this is not acceptable for people who pay hundreds or thousands of dollars for their device. The rubber feet on this stand are not in the full length of the stand. The stand is nice, but this thing is not. If I bought it from Five Below, I wouldn't be happy with it. Do it. Not. BUY. Look somewhere else.

6. 2024 Cycle Aluminum Bike Rack

2024 Cycle Aluminum Bike Rack

Installation with step-by-step instructions. Installation template is used to make a plan. The overhead storage rack only fits the ceiling spacing of 36. Can't be mounted to a wall. It's suitable for wood stud and concrete wall. The bike rack is adjusted to the ceilings from 7 to 11 feet high. Home safe. The bike rack is held in place by the aluminum top plate. The storage capacity of the aluminum bike rack is up to 200 lbs. The 13 pounds assembled weigh only 13 pounds. It's dimensions are 7-11'L x 14.5"W x 9.5"D. BIKE SAFE is a product that protects the paint from damage.

Brand: Rad Cycle Products

👤I took a chance on this because I thought there was another way to set it up. And there is! The bikes are hung by their back wheel. There is a Product is easy to put up. The plastic ceiling plate is my only concern. The contact point of the frame is not where the thick foam pads are located. The plastic plate bows when tightened.

👤Do not buy a bike rack from RAD Sportz. Period. The design and materials are very similar to the one I have used for 20 years. The times have changed. The rack is made in China. There is no quality control. I got 4 right hand bike brackets and zero left hand brackets. I called the customer service at RAD. Oops. The company that handles customer service only accepts emails. They said to send everything back to Amazon. I have a rack in my garage. There was no fault on Amazon. If you care about customer service and domestic manufacturing, you should avoid RAS Sportz.

👤The rack is sturdy and functions like it should. I consider myself to be a fairly handy person, and this rack was one of the most difficult things to put together. Assembly is a nightmare due to three main issues. The screws are the exact length you need to tighten to slide the parts together, and since you have to have things loosely screwed together to slide the parts together, you have to delicately balance tiny parts screwed in just enough not to fall off, but no tighter. There are two more Things did not slide easily when screws were loose. I had to use a hammer to get the pieces to slide together. If you don't already have a rubber mallet, you should. The arms that hold the bikes are covered in rubber. Cool, right? It's not so cool when the thickness of the rubber isn't taken into account. To get one of the arms on, you had to remove the rubber coating from the arm with a knife. My bike is hanging vertically because I only got one arm to slide on. It makes me less worried that my arm will slip down and my bike will crash, because I had to use a hammer to get the damn thing to slide in. It took me an hour and a half and a lot of cursing to get the rod in place.

7. Delta Michelangelo Two Bike Gravity Stand

Delta Michelangelo Two Bike Gravity Stand

It isdurable: The bike workstand was released to the market for a long time. One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack. Bike storage is space saving. The Michelangelo 2 bike rack garage uses gravity to secure up to 2 bikes. The assembly was easy. The Michelangelo garage bike rack is easy to install. Assembly Hardware and a wall strap are included. In Minutes. Arms Accommodate Any Bike Size Or Style, Up To 40Lbs. The support arms are repositioned with a simple twist, which makes it easy to adjust. This large capacity vertical bike rack is made of quality steel and holds up to 2 bikes and a total weight of 80 lbs. The rubber feet keep the bike rack in place.

Brand: Delta Cycle & Home

👤I had high hopes for this bike rack. The stand will work perfectly despite the flimsy look, according to all of the reviews. Wrong. I have a small hybrid bike. My boyfriend has a bike. We could not get the bike to hold the bikes in place, which is a reasonable expectation for a small and Medium sized bike. There is a The older reviews seem to have been before the materials were changed. The rack I received had no red details. The grey grip that should hold everything is meaningless. When we put a bike on the rack, the arms that are on the frame start to slide so that both arms are on one side, and the bike slides over and one tire rests on the floor. Adding a second bike on top is a bigger disaster as that bike does the same thing and it rests a tire on the bottom bike, looks hideous, and I might as well have leaned the bikes on the wall. I tried spacing the arms further apart, swapped the bike places, but with the arms sliding wherever they please, it just wasn't working. It's a hassle and a waste of time to return it. I was looking forward to being able to store the bikes indoors, but I'm disappointed. The search is on.

👤It doesn't seem like it should work, but it does and it's amazing! It took a couple minutes to put the stand together. It leans against my wall and takes up very little space. I think it looks cool that I can get my bike up and out of the way. Everyone is surprised when they first see it and they have to touch it to believe it's strong. There is no chance of the stand tipping over because the bike is pulled towards the wall. I think this is a cool, well designed product and would recommend it to anyone looking to free up some space and store their bikes.

👤I don't feel very enthusiastic about this stand. It does the job, but has some design flaws. I'm not sorry I bought it, but I probably wouldn't buy another one. It does get the job done and is cheap compared to other bike stands. It was not easy to install the screws. The two pieces were not aligned correctly. There was no way to get the angle right to screw it in. Since gravity keeps the top piece on its own, I have set it up with a missing screw. It has not collapsed in 2 months. There is a The feet are not very stable. I have it on a hardwood floor, and I have noticed that it slowly slides forward over time. I have had to pull down my bikes, adjust the rack, and replace them twice because it had slipped too far for comfort. I might need to change the shoes for it. If I'd secured the top part to the wall with a screw, I might not have had this problem. There is a The bad news is that it doesn't hold my bikes well. The handles stayed put after I arranged them. The first day was rough, and I had a hard time getting the handle positioning right. Your bike's geometry and weight distribution will affect the relative heights of the handles. Try to angle them as far out as possible. I wish there was an extra piece to keep the front wheels in place, because they can turn and damage the wall. I rigged up a utility hook between the top front wheel and the wall to prevent this, but it's a little awkward. The utility hooks are not made for this purpose and are a bit too short, but they get the job done with a bag hanging off it. There is a It's a decent product. It works, but not fancy. It's cheap.

8. TORACK Storage Organizer Vertical Bicycles

TORACK Storage Organizer Vertical Bicycles

Lifetime warranty is provided by them and they stand behind their product. If you don't like it, just return and they will give you a full refund. The finish rails and sleeves hooks are coated with a powder. Bike storage solutions are custom. A rail interlock design. You can display or hang your bike with the help of the rails and hooks. The snap hook design of Torack makes it easy to adjust the hook spacing. Bike wall racks for garage organizers make it easy to organize and clean your home and garage by getting your bikes off the floor. The 6 bike rack saves space. There are wide size hooks for bikes. Hang up fat bike tires. It's suitable for mountain bikes, road bikes, folding bikes, hybrid bikes, adult bikes, and kids bikes, scooters, etc. Hanging up and taking down your bike is easy with wide size hooks. The material isdurable. There are rails and sleeves coated with rubber. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction is used for safety loading. GS is certified. It's safe. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included.

Brand: Torack

👤I think spacing each section to separate the joists worked well so far, but I think having the entire 6 bikes would have been too tight. I was able to hang at different heights to make it easier for the kids to hang their bikes. The install was easy with 4 screws. I didn't need to use the mollys that came with it because I don't have drywall hung.

👤Can you hang 6 bikes? The rack is mounted side-by-side and flush together, not as pictured on the product page. It's important to center each rack across the wall studs, or mount it on wood panels that are anchored into the wall studs. Two bikes can fit on each section, but there needs to be spacing between the racks. There is a The rack system is not designed for bicycles. The literature that comes with the rack doesn't even mention bicycles. It's safe to say that bikes are the heaviest thing this rack system can handle, and proper mounting is important for stability and safety. Hanging and removing bikes from the rack takes care; pulling down on the bike could cause injury or even break the hook. I don't want my younger kids doing it, so only larger bikes will be mounted at our house. There is a Measure your bike and take note of the top of the tire to determine how high to mount the rack. The bottom of the rack should be mounted below the front tire. I eyeballed the 3-inch approximation because my wall is unfinished. Use a level to draw a line on two studs after you mark the desired mounting position/height. Place the rack between the studs. To mark the screw position, use the rack as a template. How close are the screw holes to the edge? It needs to be about an inch wider for standard wall stud mounting, that's my biggest complaint with this product. Make sure the holes are pre-drilled to make sure the screws are straight and the studs don't split. Once the rack is mounted, pop two large hooks on each end. Different size bikes should be mounted side-by-side on the same rack. I think this is a 4 vs 5 stars because the racks are not wide enough for optimal mounting on studs, and I am concerned that bicycle weight may be pushing the design limits.

👤Hardware for "brick walla only" is included in the packaging. This won't work if you are a majority of the rest of us and you have a garage. The holes in each panel are drilled at the center, so you're not going to find 2 studs to mount this to. The panels would have been a great product if they had made them longer, but they either cheaped out or made a mistake in manufacturing and sold them anyway. I wish I opened the box and started the project 2 weeks ago, when I was still in the return window.

👤The construction of our garage made the installation a bit complicated. Our garage was built with 24 on center studs, but the product is made for 16 on center stud construction. This meant attaching the unit to the 2x6 and covering the studs needed to hold it. The unit screws were not attached to the 2x4 because it was not wide enough. We put five adult-sized bikes on the rack, with handlebars alternating up and down. It's a lot of weight, but it holds up. Our teenage girls can handle bikes on their own, even though it can be difficult to put up and take down one at a time. I no longer have to lift large bikes over my head to hang them from the ceiling because of the amount of floor space it saves. If a person is concerned about the tires marking the wall up, then a high gloss paint should be applied first so you can clean it up every once in a while. This was a great purchase.

9. BalanceFrom Trainer Bicycle Exercise Magnetic

BalanceFrom Trainer Bicycle Exercise Magnetic

There are two things that are not provided, the first is the USB hole on the basis and the second is the fact that it is only for do-it-yourself purposes. There are two The tension screw should not be adjusted without the monitor on it. There will be noise when working with rough tires. Quite when working with road bike tires. rubber feet prevent scratching wood floor, works on any surface. A wide base and low stance for unshakable balance was built. The max load is 330 lbs. It is easy to install and release. The quick release is used to tightly hold the rear wheel. It's easier to take the bike down than other bike trainers. Magnetic resistances meet your needs for resistance and speed, and the handle bar mounted resistance controller lets you adjust resistance. The trainer stand is compatible with any road or mountain bike with a 26-28" or 700C wheel.

Brand: Balancefrom

👤I was concerned after reading a few of the reviews. There were a number of 1 star with similar complaints. It is getting too dark for me to feel safe on my bike. So. This. The easy mount is easy to assemble. I was worried that the fault had happened to me because first use could not get enough resistance. Nope. I thought what might have happened to others. If the bolt that pushes the roller against the wheel doesn't seat correctly, you can tighten it, but it won't improve contact between tire and roller. You can see the pressure on the tire by seating it correctly. An hour on level 3 feels like a 14 mile ride. I can sprint but not sustain it. I don't want a permanent mount so the cable for the resistance adjustment is annoying. If mounted correctly, it stays out of the pedal sweep. After about 100 miles, all in a great purchase.

👤I'm over 200 lbs and almost 50 years old and have arthritis in my knees and back. I need something to help me get some exercise, but not so much that I have to spend a lot of money. Even if it takes a bit of time and double checking, I'm great with putting together Ikea stuff. You can look forward to the assembly of this item. All pictures are meaningless. Don't be afraid, replace your tire rod, it will work. The front wheel chock is very strong. This will raise your bike by 2 inches. If you have some knowledge of interpreting image to ease reality to use, it's easy to put together, but I need a foot stool to get up the 2 extra inches.

👤This product is really cool. It is COVID-19 time now. I don't want to work out. Also helpful in the event of weather conditions. It is for all seasons if you don't work out. There is a Initially, he was hesitant to buy. I am telling you the value of my money.

👤The BalanceFrom Bike Trainer Stand was purchased to help with the hot summer in Arizona. I recently started biking as part of my weight loss regimen and it has become a regular part of my daily routine, until the heat hit. It's difficult to do serious biking at 120 degrees. There is a Setting up the trainer took about 15 minutes. I put one of my "good" bikes on and that became my indoor trainer after I tried it with a different bike. There is a The trainer works well, but I worry that the resistance is not as much as I would like, but I think that is a limitation of magnetic resistance. There is a It has improved my cycling ability. It has increased my speed on my bikes, and kept me strong. The tire noise and debris from a regular knobby is not really enjoyable if you are mounting a mountain bike. The trainer tire makes it better. It seems like it will last forever. Very happy with the purchase!

10. Begona Space Saving Freestanding Adjustable 20 27Mountain

Begona Space Saving Freestanding Adjustable 20 27Mountain

Don't need drilling, no damaging walls or ceilings, it's easy to assembly. There is no scratching on the bicycles. Store your bicycle quickly and easily with the included screws and anchors. The bike stand is a space-saving design that allows for portable storage in multiple indoor and outdoor locations. Store according to your needs. The upright bicycle stand can fit almost all 20”-27” bikes with full mudguard when store vertically and horizontally. There are 26”-27” mountain bikes, 650c-700c road bikes, and 20”-24” kids bikes. The display size after installation was 21.65” in length, 20.86” in width, and 44”-47” in height. angular structure andign quality The brackets form a stable triangular structure with ground and the top hook fixes tire. Four non-slip rubber supporting feet will not scratch the floor. The surface of the upright bike rack is coated with high-quality steel and sprayed with excellent powder spraying technology. It can always maintain excellent state, long-term use and stability, even in humid or windy weather. The vertical bike rack is easy to assemble and will keep the room pretty and tidy. The package has an instruction manual that is easy to install in a few minutes. To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you. To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you.

Brand: Begona

👤The stand is easy to assemble. I ran into a problem. The arm wasn't long enough to reach inside the rim of the front wheel with either my mountain bike or my road bike. My road bike is an older steel frame Lemond, and my mountain bike is a Trek Marlin. The catch for the rim was only half way up the front tire, and it wasn't long enough to fit on a road bike with 50mm deep rim. I didn't fit the rack that I had so I really did like it and wanted it to work. It would be a great stand for smaller bikes or road bikes.

👤I got this for my college apartment since our common area is low on space and my bike wasn't helping. I couldn't drill into the wall, so I had to use the ground system. I'm happy to say that it works well. It is perfect for my Vilano Diverse 3.0. It holds it well when I put my bike in. It's easy to take it up and down. There is a The instruction manual is one of my only complaints. It's too small. I had to take a picture of the manual and zoom in on my phone to get a good picture of it. Is it too much to ask for 12 pt?

👤It's easy to put together, stable, and works great in the garage for our bikes. The only way to hang those bikes is either a complicated ceiling/pully system or a front tire wall hanger that orients the bike 90 degrees from the wall and not saving much garage space. The hanger can sit parallel to the wall. The front tire support is great, so you don't need a strap or anything to keep the front tire from flopping around, and the bike feels very secure in the vertical/upright position. It works well with my wife's smaller bike. There is a The directions are printed in a small booklet. All the tools needed were supplied. It took me about 10 minutes to put it together.

👤It's really good for tight spaces that the stand is sturdy. I use it with my road bike. I haven't tried it with a fat tired MTB. There is a The front part of the stand has a red piece of plastic that is like an inverted V shape and I would improve on that. When you roll your wheel onto this piece, it can divert your wheel off to the side. It would be better if they made this into a shape channel that helps guide your wheel into place.

11. Bikehand Bike Repair Stand Maintenance

Bikehand Bike Repair Stand Maintenance

If you're dissatisfied with this item, please contact them, they can offer you a solution. Extra heavy duty and portable. The repair stand is made of aluminum with heavy duty alloy. It is light and compact when folded. It is convenient, durable and well-designed. The bike's weight is either 50 kilo or 120 kilo. HEIGHT ADJUSTED: Quick Release is adjusted from 1m to 1.5m or 39"-59" fully extended. The height, tilt, and angle all have quick release. It's helpful to get the bike in the right position. The head isROTATED: it is smart and rotates at a rate of 350 degrees. The teeth are heavy and well made. It could hold a lot. A bike at any angle. The tool plate is foldable. Attach or remove the tool plate by hand, and it will be easy to set up and store. It isdurable: One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack.

Brand: Bike Hand

👤I like this stand. The heavy duty model is what it is. The fit and smooth operation of all the parts is really good. It is a quality stand and holds my bike. Then I looked at something. The angle of the 2 extension legs is pointed at by the arm which holds the bike. You can see this in my photos if you look at the legs compared to the tool tray and arm. The inner slide tube clamp assembly is positioned on the top of the outer tube. The extension leg mounting holes are in the same tube as the notch. I believe there is a factory tooling defect. Their alignment measures are off. Maybe mine is an exception. Anyone else notice this? Have you noticed this? I will post this in the questions. I'm going to cut the notch wider to fix it. If you're going to make a nice stand, you should get your centers correct.

👤This thing tips quickly. While a bike is on it it is only okay stable, but when put on or taken off it flies backwards. The plastic on the clamp is cheap and likely to break under some pressure. I have a heavy duty model that I am a bike assembler. I will build many bikes a day. There is a The stand has a small tool tray. It is very flimsy and you can't fully tighten the two bolts that hold it onto the stand. The plastic bolts are useless after the first few weeks. I have grown accustomed to the instability of the stand, but it is still a nuisance and tips often. I am careful with the plastic handle of the clamp. I am not changing the stars.

👤The product did not operate as advertised despite the positive reviews. There is a The head can't be rotating when the head is loosened enough. I watched the no-help video to see if I could move the clamp further. After several hours, things loosened up a bit so I can rotate the head, but I can't clear the teeth. There is a The quick release does not work well for the legs. It acts as if it's either loose or tight, but there's no goldilocks here. The unit kept closing on itself because the legs were not secure. Very disappointing. I eventually got it to hold, but it isn't confidence inspiring. There is a There is one missing in my unit that is metal and associated with the rotating aspect, yet the head has what appears to be five screws. There was a random screw in the bag, but there was no thread in the head to determine where it was supposed to go. Again, not confidence inspiring. There is a The seller. I want to know if you will send me a returned unit next time. The box had been opened on one side and retaped on the other side. Even though the tape was on, the unit almost fell out of the box.

Summary

What is the best product for vertical bicycle stand?

Vertical bicycle stand products from Walmann. In this article about vertical bicycle stand you can see why people choose the product. Dirza and Auwey are also good brands to look for when you are finding vertical bicycle stand.

What are the best brands for vertical bicycle stand?

Walmann, Dirza and Auwey are some of the best brands that chosen by people for vertical bicycle stand. Find the detail in this article. Steadyrack, Humancentric and Rad Cycle Products are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com