Best Bicycle Water Bottle Holder No Screws

Bottle 28 Sep 2022 10+ Comments Open

1. Kbrotech Bicycle Adapter Adjustable Handlebar

Kbrotech Bicycle Adapter Adjustable Handlebar

The Handlebar size is 22.525.4mm. If the rubber piece is loose or tighten, you need to trim it to fit your handlebars. It is important to make sure that the rubber on the two pieces is touching, no matter how tightly you crank it down. The surface of the aluminum alloy is smooth and Rust-proof. Installation and removal is easy because the mount turns 90 degrees. Seat post diameter is 30.9mm or 31.6mm. You can only install one bottle cage with this accessory. You can install one bottle cage in the middle or two bottle cage on the other side with double model, but you can't install three at the same time. It is stable and heavy duty with two pair of pads.

Brand: Kbrotech

👤The system is great. Well made and strong. All is well when used in the handle bar position. The seat post position requires the hinged mount to be moved 90 degrees. It is not possible in this position. The brackets will be off center. I was worried that the off center anomonly would look goofy. It's not that noticeable in reality. I decided that the quality of the finish and the fit weighed on the visual alignment flaw. The two water bottles behind my seat make summer rides more comfortable.

👤The material used to make the adapter doesn't provide enough force to keep it in place, and this is something that many reviewers say is true if the supplied spacers are used. To get a small gap between the screw securing the 2 halfs and the one on the adapter, you need to cut a roll of velcro material to the width of the adapter, wrap it many times, and then use the screw to secure the 2 halfs. Tighten the screw really snug, the velcro compress will make sure there is no slippage between the seat post, handle bar, or frame tube. I mounted water bottle cages holding Ultimate Ears speakers to my trike seat frame. The speakers have not moved at all.

👤I thought I had found a solution for a water bottle cage after installing it on my seat post. The aluminum piece that holds the mount to the seat post fell off on my 4th ride. Don't waste your money.

👤I only put 120 miles on my bike since I mounted this bracket with two water bottles on my handlebars. It was mounted just left of my stem. It can be mounted on a number of different handlebars. I would like it to come with a couple more spacers to mount it to the seat tube. There is an option for one to be mounted center or two to be offset. There is a This is made in China. I will post the photos if it snaps off.

👤If you already have a spare water bottle cage, this is a good place to put it; just attach it with the included bolts and washers. The handlebars are designed to fit from 22mm up. I was worried that it would not stay tight on my bars, but so far it has. The angle for the bottle can be set. I don't know if it will hold up over time. The plastic seems to be of good quality but the hinge mechanism that goes around the handlebars is lighter weight than some of its competitors and may not hold up well on bumpy roads.

👤This was what I needed. I took the advice of another reviewer and cut a piece from an old bike to make a gasket, because the brackets tend to slip over rough terrain. Cut the tube to fit the width of the brackets and wrap it around the bike tube. It was perfect. The brackets are solid and do not move at all. The bike tire tube will be used for gaskets in the future. There is a The bottle cage works perfectly. I recommend this purchase to other people who need a mount with flexibility.

2. Desing Wish Installing Insulation Motorcycle

Desing Wish Installing Insulation Motorcycle

The TOOVREN bike drink holder is included. Speaker and other accessories are not included. The Desing Wish water bottle holder can hold up to 3.5 inches in diameter. The cans of beer, soft drink, travel coffee cup, kids' bottles, and sports bottles are all held in perfect condition by theadjustable drawstring. The water bottle cage is easy to install without any tools or screws. Attaching your water bottle bag to the railings can be done with non-slip strips. The bike cup holder is designed to keep drinks cold in hot weather and warm in cold weather. It can be used as a bicycle companion. There is a mesh pocket on the side of the bottle bag, which can be used as a tool bag or storage bag. You can put your mobile phones, glasses, keys, earphones, chargers, snacks, and other small objects in the pocket while driving. The drink holder bag is not only for bicycles. It can be installed wherever you need to drink water, such as boat, scooter, off-road vehicle, motorcycle, yacht, baby stroller, wheelchair, balance bike, etc.

Brand: Desing Wish

👤I thought it was only one vertical and horizontal strap, but it is, and it comes with two straps. The vertical strap is not sowed on and can be easily added to other straps to have two horizontal straps. If you are as dull as me, don't return it thinking one strap is missing.

👤It's easy to put anywhere. Staying power is good. Good size.

3. Active Adventure Versatile Mountain Accessories

Active Adventure Versatile Mountain Accessories

Can hold most standard, smaller bottles and cups securely. Instead of spending hours trying to find the squeeze water bottle that fits your bike bottle holder, you can get the complete 3-in-1 set. You can get an easy-to-fit set from Active Adventure that will match your bike water bottle cage, handlebar or seat post. It is easy to fit and won't break. You can mount your bicycle bottle holder with or without holes with the 90 degree adjustment. 3 You can modify from 22.2 to 31.8mm diameter. The unique square connection and vice-like grip affixes it to your seat post or handlebars. Humans Bartles: The bottle pops out of the bike water cage on bumps. The bottle is held tight by the Active Adventure Bike Cage. It can fit a 20 - 30oz wide sport water bottle. The Z-Shape Design is available in a variety of colors. There is a statue of the USA. Your set includes a water bottle. The plastic water bottle has a Jet Valve that lets youSqueeze-Drink-Ride without fussing around. You can grab that bottle as many times as you please without the cage or adapter coming loose. There is a lifetime warranty. As soon as your bicycle water bottle cage, bike water holder adapter, sport bottle and hardware arrives, read your insert card and keep it for your lifetime warranty. Fix your ride and head out on your Active Adventure hydrated.

Brand: Active Adventure

👤I would definitely buy it. I have bought a few other cage and bottle combo that wouldn't hold tight to my handlebars, they would always slide down and I would have to adjust them. There is a The set from Active Adventure comes with a nice water bottle and is very tight. The bottle has no pull top so it's easy to drink while riding. I am very happy with my purchase and will definitely be grabbing more for my kids. This is a good product.

👤It's easy to assemble. I used a hydroflask bottle instead of the one supplied and it scratched it very badly. It would be best to stick to the bottle it came with.

👤The product is a 2 part review. The water bottle holder is made of metal. It can be mounted in different angels. The water bottle is made well, but it's not free of BPA. A good combo.

👤I had to take apart the brackets before attaching them to the handle bar. The smallest wheel vibration causes the bottle to fly out. I had to stop my bike to get the bottle. The product is terrible.

👤The seller, Active Adventure, immediately reached out to provide a refund, replacement, and lifetime warranty after I posted the below. They took the time to reach out. I installed a new bottle on my bike to keep the seller in mind for future biking needs. 10/10 It was easy to put the holder on the handle bar. I bike in the inner city with few hills or rough terrain. The bottle and cage fell off the mount when I hit a curb after the screws became loose. I had to throw it away because I didn't have a comparable tool to remount it, and I was traveling light. If screws were tightened frequently, it would work well. My fault was not checking the mount's stability sooner.

👤The company went above and beyond to fix the problem I had with my water bottle holder. The water bottle and holder were replaced. I'm very happy with the product and the company.

👤I still wear plaid shorts from the 90s and have tools from the 90s. It was made in China. The design of the water bottle is shameful. The new world is welcome.

👤It was easy to put the bike on. They give the tools that are needed. There's a little thing called a spacers that helps mold to where you want it. The average water bottle is the one you use. A good solid bottle.

4. MIZATTO Bike Cup Holder Wheelchair

MIZATTO Bike Cup Holder Wheelchair

TILE andFUNCTIONAL: The cup holder for bike can be used to hold a variety of small items. You can put a big phone in the pocket on the side. There are many loops and mounting positions that can be used to hang decorations. It has a shoulder loop that can be taken to trip. The bicycle cup holder isElaborate product. Protect your bottles from falling off as you ride with the bike bottle holder, which can be easily installed with just three straps, keeping the water bottle safe and stable even on rough roads. Easy installation. The MIZATTO cup holder can hold up to 2'' bar. Installation video on the listing is all you need. The design for cups and water bottles has a drawstring. Perfectly hold your 12-32 ounce cans of beer, large cups, coffee mug, soft drinks, and a bottle. A multi-functional design is not just a cup holder. It's also great to hold bottle, cell phone, wall charging and more. Keep your drinks cold in hot weather and warm in cold weather with their water bottle holder. This cup holder is made of premium Oxford cloth and 20CC PEVA, it is durable and can be used as your faithful bicycle companion.

Brand: Mizatto

👤I love this bottle holder. They can fit a variety of different bottles. There are cans and ounces. The holder is slightly insulated to keep your drink cold. The mesh pockets were easy to install and hold small items. Before you buy, I would suggest you look at how you would mount it. If you don't have a solid cross bar on your handle bars, your drink will "lean". You can keep your bottle in it and use it as a coozie if you detach it from your bike. It's not great for road bikes as it's a little bulky, but it's perfect for cruising around the neighborhood.

👤I got tired of carrying their water bottle for them so I bought these for my daughters to use on their scooters. They fit our water bottles easily.

👤It is a nice place to keep a water bottle. It is easy to pull something out of it. I can put my keys in there as well. It works well for the child. I wish they had a better explanation for the triangle installation. I figured it out by myself. Do not need a scientist to do it. I think that's correct.

👤I like this cup holder. It keeps my drinks from spilling. I can put things in my cup. It is lightweight and insulated. I was disappointed that they didn't show a cell phone holder. You have to have a small phone for it to work. I would give it 5 stars if they sewed the part down the middle.

👤I wanted to attach it to my electric scooter. The inner lining is not heat sealed as some lunch bags are and it is not good. If there is a spill in your container, it will leak out of this holder as well. I didn't think it was that big of a deal. I had to ride home with liquid dripping all down the front of me, the scooter, and everything else because the holder acted like a slow sprinkler head that absorbed some of the liquid and then steadily leaked the whole way home. I am trying to dry it off as much as possible after tipping it out. The liquid got trapped between the two walls because the seams puncture through both layers and provide entry and exit for liquid, so it didn't really work. When I got home, I had to spray the scooter down.

👤I bought two e- bikes and thought they would be a nice addition. The quality is good and I like the way they fit into the crevices of the stem and handlebars, but unfortunately for me they can only attach to the left side of my bikes, which is odd since both of my bikes have the electric control box on the left. They are perfect for holding sports bottles.

👤It's easy to get the bottle in and out because it's right there by your hand. I was drinking more. The side pockets are pretty tight, so I'm pretty happy with that. They're good for keeping things in there that you don't need immediately. I had to use two hands to remove them. If you're more co-ordinated than I am. You can't fit a lot in the side pockets. I wish they were bigger but not large enough to take off a star. I didn't know what I was doing so it was difficult to put on. Instructions might have been helpful. I figured it out. I am very happy with the bottle holders. It is easy to use and convenient. I like them a lot.

5. Bike Retention Bottles Lightweight Mountain

Bike Retention Bottles Lightweight Mountain

A well-designed cup holder. You can place it on your bike anywhere. It also fits most baby strollers. Stay hydrated on your ride with easy access to your bike water bottle. It's great for road, mountain, hybrid, touring and electric bicycles. You can go the distance if you buy bottle cages. The bottle retention system ensures that a full bottle stays firmly in place when riding, whether you're out riding fast on roads or bumpy trails. The following sizes are included: 20, 21, 25, 24, 25 & 32 oz. One-piece flexible design. It is possible to fit slightly smaller or larger bike water bottles. Superb Durable Quality and Stunning Finish to Match Your Bike - CNC machined aluminum alloy, heated treated for a strong and lightweight design. The finish is powder coated and high tumble polished. It is very easy to wipe off. The weight is only 48g/1.69oz. It was quick and easy. Mount your bike frame in 60 seconds. Oval mounting holes allow for fine tuning of position. There are 2 bolts with shir steel. The bike frame requires threaded holes for installation. The bottle cage is mounted on the bike frame. They are so confident in the quality of their products that if you have any product issues, they are very happy to either provide aRefund or aReplacement.

Brand: Pro Bike Tool

👤I ordered two of the cages after reading the reviews. They fit well and were the same as any cage. I lost a bottle on the first ride. I was on my first ride with them and the bottle was completely different than it was when I got it. Since I own them, I bend them so they are tight, but by the end of my ride, they are loose and lose bottles. Highly recommend avoiding these cages. I lost a bottle this morning which I didn't realize, so I ordered new cages.

👤The water cage on some mountain bikes is too high for a larger water bottle. There's plenty of clearance for the suspension on my bike, so that the water bottle could sit lower. A water bottle cage is not made. I found this one that has a solid back that I could drill a new mounting hole into, allowing the water bottle cage to sit about 1.5" lower, allowing for a larger water bottle. I can fit a 33 ounce bottle in my hand. The material was easy to drill through. The water bottle cage has screws. If I placed the screw at the top of the cage, it wouldn't interfere with the water bottle. I backed the new hole with a rubber washer because the back plane doesn't rest flush on the frame. The cage seems to be well-made. The material is light and strong. 55 grams is the weight of the cage with screws. The last cage was weighted with screws. If you ride on rough terrain, this one can be adjusted to hug the water bottle tighter or looser. Pull the tabs apart gently or squeeze them together to bend them. Happy riding! The rubber side should be kept down.

👤It's hard to be excited about a cage. I don't think they improve the aesthetic of a frame, but this one surprised and impressed me immediately. I've had others of this shape in plastic and carbon but this one is just as nice looking and much more sturdy. It's great for horizontal applications. The top bolt is difficult to use with a tri-tool and the black finish seems durable. This is my first review for a bike part, and I have been biking for 30 years.

👤I am a mechanical designer and I design a lot of metal parts. I look at items with a critical eye because I do a lot of things. I really like this bottle cage. The design is modern and sleek. The weight advantage was maximized without compromising strength. It is a lightweight metal, powder coated with a black finish that looks great on my orange and black bike. Excellent finish and easy to install. It can be painted if the finish gets a little "beat up" over time. I am seriously considering purchasing a second bottle holder mount for my bike because it has two locations on it. Everyone did a nice job.

👤A great cage. This is better than cages that drop bottles in rough terrain, and it holds in rock gardens and rocky descents. The cage is tight over the CamelBak Podium Big Chill insulated water bottle. I think it could hold a bigger bottle. The attached image shows a bottle that has a nicely-fitting prong that helps with longitudinal movement. It's simply wrapped around your bottle. I suppose there are equivalents of "known" brands, but this one looks great, is alloy and holds well. The manufacturer should send some samples to the brands to have their product tested against them. It would hold up.

6. N STAR Motorcycle Adjustable Handlebar Compatible

N STAR Motorcycle Adjustable Handlebar Compatible

You can install the bike water bottle holder on either side of the bike. According to their guideline, it is easy to operate. If your bike has a bottle cage fixing screw, you can fix it to the front tube. If there is no bottle cage fixing screw or used for motorcycles, you can connect the converter to fix it on the round tube without screws. The bottle cage is made of nylon plastic and lightweight, so it won't wear the bicycle frame. It's suitable for roads, mountains, electric bicycles, adults, kids, motorcycles. The bottom of the bottle cage has a red button to adjust the size of the water cup so you don't have to worry about it falling or shaking during riding. Professional accessories are designed to allow you to quickly access your water bottle or cup, keep adequate water when riding, and enjoy a pleasant riding trip. You can complete the installation in 5 minutes. Installation instructions are required for the product to work. You can complete the installation in 5 minutes. Installation instructions are required for the product to work.

Brand: Boxgrans

👤The water bottle cages on my Trek bike were too low. I am a smaller female and there was no way that I could get to where Trek put the water bottle. If I add any holes, my Trek warranty is voided, so this was the perfect option for me. I could place my water bottle in a convenient location.

👤I bought this because of the rotating mount. There is a It's used on a trike and the handle bars are not horizontal. The U-bolt mount is very strong. There is a The product is made of high quality material. There is a The reason for only 4 stars is due to the fact that it won't hold a bottle as large as advertised.

👤Multiple orientations can be installed. I have one in my bike. She always has a bottle of water in her holder and has taken spills. The bottle stayed in the holder and the holder without any issues. It's light and Sturdy for any bike.

👤There are a number of ways in which mounting hardware can be used. I had to put it on the bars. The bottle holder adjustment helps keep bottle sizes secure.

👤The hardware I got from was not compatible with my normal mountain bike. I couldn't fit any drinks because I'm short, so I tried to strap it to my seatpost.

👤The product was well manufactured. It works on our e bikes. A great gift for cyclists.

👤I want to mount on the handlebars. There are no instructions in English. Poor diagrams. It took 45 minutes. The wrench was not the right size. There are better and easier ways to install.

7. 50 Strong Water Bottle Holder

50 Strong Water Bottle Holder

The 3 Velcro straps on the back and bottom can be adjusted to fit most types of bikes, so it can grasp tightly on the bicycle frames. Even if you ride on a bumpy road, it doesn't move. The 50 Strong water bottle holder is lightweight and easy to install. Attach your bike's frame with your existing screws and pop in your favorite bottle before you start riding. It's great for road, mountain, hybrid, touring, triathlon and electric bicycles. There are two bike cages for sale. Screws are not included. The light weight cycling cage is designed to fit most brands of bike water bottles. It's designed by a cyclist and allows you to access your water bottle. Attach the cages to your bike. Black, green, blue, red, pink, and white are available. Their bike cage is made from premium plastic so that it can hold up to any bumps in the road and your endless hours of scenic rides. You can keep hydrated on road and trail rides with this bike cage. The bike water bottle holder is made in the USA.

Brand: 50 Strong

👤Sometimes stuff happens. The bottles cages I received were faulty. It was too tight to remove a bottle because the "wings" were too close together. I wrote a note to 50 Strong. I received a reply the same day that said they would replace the bottle cage. The package I received two days later contained two bottle cages, a hand written note from the customer service rep apologizing for the issue, and a package with one bottle and two bottle cages. Customer service is what my friends are called.

👤These cages are strong and cheap. It seems to be a tougher type of plastic and made thicker than others at a similar price. I have had 2 for a year or more. Extras for new bikes are not replacements as they don't break. There is a There are two things that work for me. They are a little tighter than cages, so they will hold a standard water or soda bottle, whereas a lot of cages will fall out. The tab at the bottom of the cage sticks out further than most cages so that even an undersized bottle won't fall through. I carry a standard 500ml water bottle with a thin neoprene coozie on, and they fit great. The cages have enough space to hold a larger soda or gatoraid bottle, as well as a bike water bottle. 2. The mounting holes are lower in the cage. The lower hole is under the cage. This works great on my folding bikes, as it keeps the cage higher up the frame tube and it isn't in the way of the folding mechanism. I keep the bottle out of the chainring on another bike. If you put a bigger bottle in the cage it would rub on the chain because it sat just low. The location of the mounting holes in the previous cages made them sit about an inch lower. There is a Quality and price are nice.

👤I bought 2 sets of these in a single month. The first set was perfect. Quite happy. So bought another. There were 2 issues, 1 minor and 1 major in the second set. The mounting screws weren't included. I lost a bottle on a paved road ride because it was spread open. The set I bought first had a 1/2 gap, the second had a 1/2 gap, and the loose set had a 1/2 gap. The second set was shipped with one jammed inside the other to fit in a smaller box, and I suspect that it affected them. Cheap shipping and packaging ruined a good purchase. The tight one is usable, but I will have to buy a new cage to replace the loose one, and buy a replacement for the $25 bottle.

👤When I got my bike three years ago, it came with one of these, and I'm happy to find more like it. It doesn't scratch up a Hydroflask like all the other bottle cages. I don't think it will break soon, and I don't think it will crack soon either. It doesn't come with hardware, so reviews are upset. Most cages don't have the hardware that came with the bike.

8. SKS Germany 11231 Anywhere Bicycle Attachment

SKS Germany 11231 Anywhere Bicycle Attachment

Their bike cup holders are complete with a limited lifetime warranty, and are in a league of their own. Simply reach out with any questions, as they offer US-based customer support. You can easily mount it where you need it. Any size frame up to 250mm in circumference can be fit with the straps. It was designed to fit almost any common water bottles used in the bicycle industry. The package weight is 0.2 pounds.

Brand: Sks-germany

👤This is the first review in June. My wife wanted the holder to be in the location you see in the photos. The tube is very thick and your standard style wouldn't work. I went with this one. There is a rubber gasket on the inside of the strap. I cleaned the bike to get the best grip. It can cause the rubber to slip if you install it on a dirty bike. I put it on and let it sit for two hours to allow the material to stretch a bit. I re-ightened it. She was able to remove and re-insert it after she used it with a full bottle. I tried to re-tightened it for a third time but I couldn't see any slack being removed. When the time comes, I will do a one-year follow-up. She is completely happy with the product.

👤I think it's as good as it's going to get. If you don't want to drill holes in your frame, your options are limited. There is a built in grip on the opposite side of the Velcro. It's strong enough to allow you to tighten it down. Any damage to your frame is mitigated by the contact points. I haven't had any issues with it.

👤I don't have bosses on my front suspension forks, so I was looking for an alternative to the Salsa Anything Cages. It worked great when I came across it. I used one on each fork for roughly 300 miles of the Arizona Trail and they fit my water bottles just fine. Adding two strips of electrical tape to the forks can easily fix the tendency to slip and turn inwards.

👤I have been riding a road bike in Seattle for thirty years. Life is great again after I got an ebike. There is no place for a water bottle as you do pedal. I leave the motor on for the first 30 miles. This works well. The top tube is flat on top. There is a non slip material that holds the supports in place.

👤The metal water bottle behind my seat was not accessible by this Topcage. When I read the positive reviews for this product, I was encouraged because my trike has limited options for mounting accessories. I didn't want to drill holes in my frame, so easy installation was what I wanted. I was not disappointed. I tried to mount the cage on my trike. Installation and removal were easy. The long straps made it easy to mount on different tube sizes. The Velcro holds up well. The cage has not moved since I installed it. I decided that the Topcage was on the trike post near the pedals. I can return the bottle securely to the Topcage without a problem. I like the cage design. It secures the bottle very well, compared to my original cage, which the bottle constantly wiggled loose regardless of adjustments. The bottle is secured by this SKS Topcage. I use a bottle. The plastic seems strong and I liked the 5-year warranty. I highly recommend the SKS Topcage. There was no discount, promotion or free merchandise offered for my review.

9. UShake Bicycle Aluminum Lightweight Brackets

UShake Bicycle Aluminum Lightweight Brackets

Friendly customer service and a high quality Goya. There are any questions regarding the contract with RockBros Bicycle. The artist. There are mesh pockets that can hold small repair tools and cash. The 4 X M5 x 12 SCREWS are included. The screws are standard size for water bottle mounts, and washers are suggested for tight fixing. High quality material and manufacturing process for extra strength and durability combined with low weight, 2.1 ounces each, is what the 6061-T6 HEAT-TREATED ALUMINIUM ALLOY is. It's a good fit for plastic water bladders. ALUMINUM WATER BOTTLE CAN BE SCRATCHED. Easy installation. Attach cages with screw holes on the frame with a 4mm key. The bike frame requires threaded holes. The 26 Oz water bottle can fit snug. The min bottle diameter is 2.70inch and the max bottle diameter is 76.2mm. The water bottle cage has arms that wrap around the bottle to keep it from falling out during your ride. Back up from Bush. If there is any issues with the product, please let them know and they will follow up.

Brand: Ushake

👤The bad: - It's not easy to install, but it holds a water bottle well even on rough terrain. The bottom line is the bad and none. These are a great value for a set of 2. They work well and are easy to install. They held my water bottle.

👤The bike bottle holder worked well. I have a bottle that is larger than normal, but other bottle holders wouldn't accept it. The water bottle holder was in the package. It seems that it will also hold a 3 inch water bottle. Installation only took a few minutes because the mounting holes match my Trek Verve 3 mounting holes. The holder appears to be of high quality. It works perfectly on a couple of rides I have ridden. If your water bottle is larger than most bike water bottles, I would recommend it.

👤Cons. The Pros Light weight water bottle will fly out if they bend over time. Cheap. I mean cheap, not inexpensive. I had to take one of the bottles out of the other because it was loose after four miles on the forty four mile trek. I had to bend them again every few miles. I put my bike cable through the bottles to keep them from flying out. I removed them from my bike and will be putting a warning in the free bin.

👤I bought these to hold beverages. I didn't understand that the water bottle holder was only for water bottles. I tried to put diet coke in the unit but it fell out. The spacing between the bars is too wide. It looks like a quality product and was delivered quickly. My poor choice on the selection.

👤I'm a vivid bicyclist rider with a steady 20-25 miles every other day, I own 4 bikes and 2 of these holder and it comes with mounting screws and is easy to install.

👤I use these on my old Trek XO1 for gravel bike riding in WY. I've taken this bike on a lot of terrain to find areas that would have been better for a mtb. I have never lost a water bottle. This bike is riding on 700c tires, without suspension. I have also ridden the bike down some steep staircases and never lost a water bottle. They do what they are supposed to do for a fair price. There is a The bad is that the seat tube cage cracked straight through, and the downtube cage had a small crack over two years of use. U-Shake gave me a 50% discount for a new set of water bottle cages, so they definitely got my business.

👤I bought them because of the price. If they worked for a little while, it would be no big deal. They're great! The product I saw in REI was twice the price. I put it on my bike and rode off into the sunrise. Great product.

👤I installed these on my 700c bike with two screws. The plastic bottle I used fits perfectly. The bottle is small. Strong material, painted nicely, works for me. I wouldn't say it's the fanciest looking thing out there, but the price was good and it works for it's intended purposes. If you want to keep weight down, these might not be for you. It feels like metal and is heavier than plastic. These work great if weight doesn't matter. I like them and have no complaints. They attach securely, no wobble or anything like that. I use these on a cheap mountain bike that I ride on the streets pretending it's a road bike. I am not an avid biker or enthusiast. My experience with these bottle cages has been good, so I would say give them a try.

10. Ieasky Adjustable Rotating Stroller Motorcycle

Ieasky Adjustable Rotating Stroller Motorcycle

We are so confident in the quality of their products that if you have any product issues, they are very happy to either provide aRefund or aReplacement. The bike bottle holder is made from eco-friendly plastic steel and metal parts that are safe and harmless. The bike holder is great for keeping cups, cans and bottles, it is very durable. The water bottle cage for mountain bike can be adjusted to make it easy to hold the water bottle or drink cups. The bike cup holder is easy to use. The bottle cage is easy to install and use. It can be fitted on a variety of things. The bike cup holder is equipped with a gasket to prevent scratches and anti-slip that can securely hold your cup or bottle in place and keep your drinks from spilling or falling off. It's great for folding bikes. There are two motorcycle cup holder sets available to meet your various needs. It's perfect to put it in the handlebars, engine guards, and umbrella car.

Brand: Ieasky

👤I didn't want to drill into my bike because I'm lazy and not a handy person. This item allows you to hold a bottle. You don't have to worry about two holes in the bike if you made a mistake. I wanted red. Since my bike is black, it will blend in. I'll get a red bottle instead. There is a The setup takes a while. If you stick on their washers first, you'll have to try again. The product is great and the price is great. Win or lose.

👤2 stars for price. There is a It is a great price but not the best. It was loose from the holder to the brackets. The plastic doesn't seem to hold up to any more pressure, so you could probably tighten it. The bolt that you tighten it to your bike with protrudes from the fixture a bit leaving room for a child to get scratched or punctured if an accident were to occur. The first picture shows how well the drink holder is attached to my son's scooter, and the last picture shows the drink holder on my bike, which is attached with velcro. The screw on type has a different look than the velcro one.

👤Both the bike holders are on non round pipes and hold up well on our bikes. We used it on 2 bikes and tried using a steel bottle and a sipper style bottle. Once you do it a few times, you will get used to the angle.

👤The bike bottle holder is perfect for holding the 16.9oz bottle I grab in a rush. It's easy to install. If you have enough thight.

👤I ordered the 2 pack for my kids bikes because it was convenient to install on smaller bikes that don't have a dedicated spot for a bottle holder. Both holders were broken when they were received. The bottle holders had one of the jaws broken. I found the broken jaw when I opened one. I didn't open the second one because I could see it was broken in the clear packet. The jaws on both holders were broken from the same spot. I don't know if that caused the damage. It will be better to ship in a box if the package came in a pouch because damage could happen during shipping. The price was good and there were not many universal holders for small bikes. I am returning it immediately but taking a chance by replacing it with the same item. Hopefully the next one is undamaged. The bottle should hold up fine, as the overall built doesn't seem fragile. When the next package arrives, I will see. I will have to return for a refund if that is broken as well. Shipping was on time.

👤My kids wanted water bottle holders for their bikes, and we had high hopes these would work. They are easy to install on the bike, but not so easy to stay on. They don't tighten very tight and once you put a bottle in, you can fall off. We spent more time stopping to put them back on the bikes than we did riding them. We are looking for new water bottle holders after they moved into our garage.

11. PRO BIKE TOOL Bottle Holder

PRO BIKE TOOL Bottle Holder

It is possible to achieve dependability. YETI bottles can be used with huge bottles, tiny bottles, beer cans, and more. It's easy to access your bike water bottle when you need it. It's great for road, mountain, hybrid, touring and electric bicycles. You can go the distance if you buy bottle cages. The bottle retention system ensures a full bottle stays firmly in place when riding, whether you're out riding fast on roads or bumpy trails. It was approved and tested with drops andvibrations. The following sizes are included: 20, 21, 25, 24, 25 & 32 oz. Not compatible with regular plastic bottles or metal insulated water bottles. The hollow aluminum alloy tubing construction is manufactured in Taiwan to a very high standard. It is very easy to wipe off. The weight is 70 grams and the length is 6 inches. It's easy to install a bike frame. Oval mounting holes allow for fine tuning of position. There are 2 bolts with shir steel. The bike frame requires threaded holes for installation. The bottle cage is mounted on the bike frame. They are so confident in the quality of their products that if you have any product issues, they are very happy to either provide aRefund or aReplacement.

Brand: Pro Bike Tool

👤The water bottle cage is very nice. It's a little more expensive than most, but it's worth it because the water bottles fall out of the others. I can only say that it is a negative. They put it on sale with a coupon for 50% off. I wouldn't have cared if it was 5%, but half price. When Amazon wouldn't match my price, I returned it and bought another one at a significantly reduced price.

👤The bottle holder is lightweight. It fits my bike's mounting holes and seems very sturdy. I was very happy to find that it held some bottles that I already had. They are 2 1/2 inches in diameter. I like the steel ones better for their taste. The bottle shouldn't fall off the bike unless you crash.

👤The holder was advertised to work with large bottles. A standard 20 oz bottle is larger in diameter than a tall and narrow 32 oz bottle. It was very tight. The holder is going back.

👤The holder is small and does not hold my 24 ounce container. A bottle. I bent the holder to fit my bottle.

👤The bicycle bottle holder is white. Does what it says and does it well. Don't expect it to hold bottles larger than 32oz. It is too narrow.

👤The product arrived quickly and as expected. No complaints! I've only had a few days, but it's holding up.

👤I lost a water bottle while holding a plastic bottle. This can be tightened.

👤The bike looks great. It is easy to assemble as well.

👤This item is sturdy and good.


What is the best product for bicycle water bottle holder no screws?

Bicycle water bottle holder no screws products from Kbrotech. In this article about bicycle water bottle holder no screws you can see why people choose the product. Desing Wish and Active Adventure are also good brands to look for when you are finding bicycle water bottle holder no screws.

What are the best brands for bicycle water bottle holder no screws?

Kbrotech, Desing Wish and Active Adventure are some of the best brands that chosen by people for bicycle water bottle holder no screws. Find the detail in this article. Mizatto, Pro Bike Tool and Boxgrans are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to