Best Bicycle Wall Mount Vertical

Mount 20 Aug 2022 10+ Comments Open

1. LYCAON Ultimate Bicycle Vertical Storage

LYCAON Ultimate Bicycle Vertical Storage

The arm hanger is made of soft red rubber to protect against paint damage. It is strong enough to fit most bike frames, and large enough to fit children's bikes. Before you start, please find the correct height placement. The exclusive high-class gray makes bike Racks not only a wall mount but also a decoration. The rubber-coated hooks prevent bikes from being scratched. The maximum hanging weight is up to 68lb. It's strong enough for most bikes. Bicycle Wall Mount, Bike Tire Tray, Screws. Bicycle Wall Mount, Bike Tire Tray, Screws.

Brand: Lycaon

👤I have a tire that barely fits on the frame of my 29er.

👤It seems easy to install and deliver.

👤Well built. There were no cold joint welds.

👤Terrible experience! There is a It was like new. When new, $3 Cheeper. The bike hangers are the only things that come with it. It should be in the description. There is a It was a bad experience.

2. Egofy Holder Vertical Bicycle Storage

Egofy Holder Vertical Bicycle Storage

The bike mount has a rubber coated hook to keep the bike secure. Pan head screws are more stable and safer than the three expansion bolts. It's easy to install. The bike wall mount has all the necessary screws and anchors. The product is designed for use in wood stud and concrete wall. The fixed hook can save space. Hang the front tire to easily load the bike. Safety locking prevents accidental release and the bike rack has a hook with rubber coating to protect it from scratches. Heavy Duty has a maximum hanging weight of 33lb. It's strong enough for most bikes. Hang the front tire on the bike rack to load it. Hang the front tire on the bike rack to load it.

Brand: Egofy

👤These hold our bikes well. The only issue that kept the rating from being 5 stars was the use of the provided drywall anchors. The weight of the average bike would rip those right out of the wall. It's best to use an existing stud or a base. If you have to mount on the wall, go to the hardware store and get some beefier anchors. These are recommended if you don't have a gripe.

👤The anchors are not good. They came out of the wall. The design of the product come off the wall and I am afraid it will eventually give out.

👤I hung my tools belt from one of the hangers and used only one for my bike. Both are hanging on the wall. The paint and Fabrication look is good. The package has different bags for each hanger. Only a small paper template could be used to drill the prep holes.

👤It is very sturdy and does the job. Good price too!

👤It's easy to put up in my garage.

👤Me encanto mis bicis, no se ve ningn reguero.

👤I used this to hang my shark rocket pro since it doesn't come with a mount. This was definitely used for the purpose.

3. Gootus Bicycle Storage Horizontal Adjustable

Gootus Bicycle Storage Horizontal Adjustable

Session Bike is a company that is driving innovations to add value to their customers lives. If you are unhappy with their bike hangers, please get in touch with them and their customer service team will get to work on it immediately. Click here to add to cart. Hang and store your bicycle horizontally, which is convenient for storage and disassemble. The angle and length of the bicycle storage rack can be adjusted to fit different bicycle rack angles and shapes. The bike wall mount is made of heavy-duty thick steel and has a load-bearing capacity of up to 66 pounds. It is suitable for all types of bicycles. The bicycle rack has arms that can be adjusted. Put the beam on the bicycle when you use it. It can fold the brackets to save floor space, which is very suitable for apartments, homes, garages and sheds. The bicycle hook is wrapped in a sponge, which will help protect it from being scratched, and will give you a strong, durable and sturdy bicycle wall mount kit. The garage bike rack is easy to install. It can be done with a drill bit and screwdriver. The bicycle wall mount should be placed on a strong column, beam, masonry or concrete wall. Unless there are wooden pegs behind it, don't install the bicycle hanger on a wall. Please contact them if you have any questions. The garage bike rack is easy to install. It can be done with a drill bit and screwdriver. The bicycle wall mount should be placed on a strong column, beam, masonry or concrete wall. Unless there are wooden pegs behind it, don't install the bicycle hanger on a wall. Please contact them if you have any questions.

Brand: Gootus

👤This is probably the worst product I have ever ordered. The "expansion screws" in the doc do not expand. Look at the first picture for a view of the result. I bought larger screws that didn't correct the issue. I was able to get the anchors out of the wall with needle nose pliers. The second picture shows why they came out so quickly. At the very least. The instructions in the 3rd and 4th pics don't give a clue as to why the expansion screws failed. There are some "mystery parts" that were shipped with the item. I don't know where these are referenced in the enclosed doc. I went out and bought proper anchors and installed it anyway, even though I wanted to send it back. I will never buy another product with the brand "Gootus".

👤I don't usually write reviews, but this one is well deserved. I bought this a week ago, and after three days, the expansion screws were broken, and my bike fell, because they didn't support the weight of my bike, which is up to 66 pounds. I tried to fix it, and bought more expansion screws to make it more reliable. The screw expansion broke again after three days. I wish they could pay for the repairs to my bike. Don't buy this unless you want to bike on the floor after a long period of time.

👤The design of the rack does not allow it to mount all four holes on the stud. It doesn't look like it will last long because the mounting hardware is flimsy.

👤Absolutely junk. Can't keep it from moving. Wouldn't waste your money. Would not give it any stars.

👤Likes when not in use. My gravel bike's tube is not 100% parallel to the ground, but it can be accommodated with a swivel. The anchors and screws do not grip the wall board. That is important for the top screws. I picked up thicker, better quality anchors that spread out on the inside as you screw them in.

👤This item spins on set screws and won't tighten, so when you hang your bike it falls off. Try everything possible. Garbage and angry.

👤I couldn't make the nut tight enough to keep the arm from moving. It's not going to fall apart, hung up the bikes and work well.

👤I had to fit my bike in my garage so I could keep my car inside. This was a great solution.

4. Koova Storage Bicycles Cruisers Mountain

Koova Storage Bicycles Cruisers Mountain

The quantity is 2 pieces and the Rim is 3.3 inch. Koova Bike Rack is a sturdy, easy space-saving storage system for bikes and helmets. It's simple to mount on a garage or shed wall. The hooks hold the bicycle until you are ready to ride. Hardware needed to mount in minutes is included. The bikes should be resting on the hooks. Up to two helmets are out of the way when storing your bikes, so it's a good idea to store them neatly. The steel component is cut and powder coated. Their innovative design supports the bike's weight while rubber encased hook cradles are not damaging the rim, tires or spokes. Water bottles, tubes, and other items are on a utility shelf. All bikes are compatible. You can hold your road, hybrid bikes and beach cruiser in one spot. Ample space between bikes allows for quick dismount. Fat tires? There are 3”+ sized hooks available. Koova's Bike Storage Racks are guaranteed to last. They offer a lifetime satisfaction guarantee. They will repair, replace or refund your money if you are not happy with a product.

Brand: Koova

👤I have always stored my bikes in the garage. I started talking to the owners of the bike shops and looking at the line. The Koova system is the best of the best according to the other reviewers. The bike storage rack has a top gun. To me, the most important thing is the wide of the tire and the properly-angled hangers. The J hook design used in the systems I had seen looked less sturdy, complicated or worse, and it made mounting a two person operation difficult. The helmet hooks are an added bonus. Everything can be stored in a single location. I bought the six bike rack. Three children were riding their bikes at the time of the review. You might see tire marks on the wall now that bikes are mounted. Not a dealbreaker. I'm sure I can come up with a solution. I had a question about the ideal height of the hanger channel above the floor to accommodate my cruiser bike. Within a few minutes of sending an email on a Friday afternoon in July, I got a nice reply from the founder, Mr. M. Richards. I know I made the right choice because of customer satisfaction.

👤It's very easy to install and hold 4 bikes. I don't know how you can get 6 bikes on this rack. The extra brackets were used to hold tie downs. It's easy to move the bike off the rack.

👤It's the best on the market. This product is worth every dollar. I couldn't get 3 bikes to fit, so I was confused. The CEO reached out to me after I wrote a review and explained that the middle bike and 2 outside bikes are supposed to be handle bars up. You can maximize the space by doing that. It's rare to have a CEO. It is advisable to send a gift for the confusion as well as go to this level of customer service. I left a review for the Koova Garden Wall Mount. Another great product from this company. I bought a second one because I liked it so much. In the picture, I only have a small portion of the sets up. I put 3 bars together in each set. The 4th bar is on a different wall. This is by far the best unit out there. Is easy to mount and durable. I told you that I have 30 items on my wall. It is not even 2 full sets. It looks organized and not cluttered. A good one.

👤This was the easiest bike wall mount I have ever installed. It can fit 6 bikes top to bottom. We have a mountain and road and it is not an issue. The only thing that happened during installation was the head of the mounting screws being twisted off. It needs to find another one and mount it lower. An extra in the package would be nice.

👤This is an excellent bike rack. If I had ordered the 6 bike mount, it would have been sent as a set of 2 mounts that are about 32ish inches long. If you don't have the space on a single wall, you can mount in 2 different locations. There is a It came with all the necessary hardware. I put it into concrete. I used the same screws as the included lag bolts. It worked fine and did not cause any issues with the bike mounting hardware. It was very easy to install. I received a package in the mail that contained additional screws because there was a report of lag bolts sheering, which seems like a small company. I would buy again.

5. Vertical Bicycle Hanging Storage Non Reversible

Vertical Bicycle Hanging Storage Non Reversible

The maximum hanging weight is 66 lbs. It is strong enough for most types of bicycles. A good amount of bike hooks for the garage. There are 4 packs of their wall mount bike racks. You can choose between 2 and 4 packs. The quality of the bike rack hanger is very good. Each bicycle rack has 4 holes, 4 screws, and 4 wall anchors. Have a look at their bike hooks. Perfect Space Saver Solution The bike rack for garage has a heavy duty hook and thick base that is designed for storing bikes. You can hang your bike on the wall through the wall mount bike hangers, and put away your bikes in order, if you install the vertical bike rack on the wall. It's perfect for anyone looking for a single bike storage solution. Heavy Duty Bike Hanging Hooks have a screw and non-reversible hooks. The garage bike rack is made of premium steel and comes with high quality screws and plastic wall anchors. The heavy duty non-reversible bike hooks for garage have a thick rubber coating to prevent accidents. 60lb can be supported by the storage bike racks. The bicycle rack is heavy duty and duarable. Installation tips for bike Racks. The garage has bicycle racks. If you mount the bike on the wall, you must mount on the stud. 2. The heights can be staggered and the bike rack spacing can be between 14 and 16. If you install the indoor bike rack hooks high on the wall, it will take a fair amount of strength to mount and dismount the bikes. Every customer has a premium after-sale service. If you don't like their products, you could get excellent customer support. They will provide top level customer support and stand behind their bike hooks. You will not regret your choice if you just have a try. Every customer has a premium after-sale service. If you don't like their products, you could get excellent customer support. They will provide top level customer support and stand behind their bike hooks. You will not regret your choice if you just have a try.

Brand: Laxama

👤Instructions for installing with drywall anchors are included in this product. If you mount a bike to the wall, you need to attach a stud to hold the weight of the bike. If you have to attach to studs, why bother giving you a drywall anchor? They're so proud of having upgraded that they should ignore the fine print. It's a simple and affordable solution. Advertising and installation recommendations are just weird.

👤I received the bike mounts yesterday, but have not installed them yet. But! China might take over manufacturing worldwide if all products were as sturdy as these. I have high expectations for the service they will provide because these mounts are very sturdy and well made. This is a real winner, and unlike some Chinese companies and products. This one is the only Chinese product that I am not a fan of.

👤When I saw these coming out of the box, I thought they were going to be a cheap China product, but I held them in my hand and they were very sturdy. I am going to buy another set of bikes to hang on the wall in my garage, I am very impressed with this purchase, I would definitely recommend purchasing this.

👤Really happy with the mounts. Four bikes are hanging. It's easy to remove bikes when they're down. Highly recommended.

👤The item was easy to install because it had the studs. I added a piece of board to help anchor them. Younger kids will have issues pulling bikes off due to how they have to be lifted and pulled over, it's easy for adults to pull bikes off. That is the only complaint I have so far.

👤It's very cheap and similar to some you can purchase. These aren't "Fancy" hangers, but they seem to be sturdy and well designed. The hooks they replace are not as easy to use as the ones mounted on the studs.

👤It works great to attach a single vehicle. You can hang them on 24 centers until you run out of bikes. The handlebars are not an issue if the height is staggered about 18.

👤It's easy to install. I think the quality is good. He holds both mountain bikes. They can be hung by the front wheel or back wheel.

6. Ibera Horizontal Bicycle Storage Adjustable

Ibera Horizontal Bicycle Storage Adjustable

This large capacity vertical bike rack is made of quality steel and holds up to 2 bikes and a total weight of 80 lbs. The rubber feet keep the bike rack in place. The wall hanger's angle can be adjusted to keep your bike level. The correct height for the tyres should be at least 4 inches off the ground. The mount must be mounted on the side up. A horizontal wall mount for a single bike to save floor space. The weight limit. 38.6 pounds. The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall. The double arm is padded to protect against paint damage. It's suitable for most bike frames. The beam length can be adjusted to fit narrow or wide handlebars. The wall has a mount on it. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. If you have any questions about the installation, seek professional help.

Brand: Ibera

👤I am a mechanical engineer, and I feel qualified to evaluate this product. There are many reviews that praise the quality of the bike hanger, but I don't have much to say. I would have made the product from steel and supplied the frame rests or spacers for the wider frames tubing. I would like to defend this product from the many reviewers who thought it was a bad idea to fall off the wall. Did you read the directions? It says to use the anchors only in concrete walls. The complainers stuck the anchors in the wall. I advise you to stop blaming others for your fault. If you don't know what you're doing, you can either learn or read the instructions. There is a picture of a proper installation. The plywood spans between the studs, giving many options for placement. The lower side is in compression, so the 4 screws are on the upper side. There is a Good luck to everyone, and safe ride!

👤I put up three of these in my house and I am very happy. I have some advice. Don't use the screws in the package. Get something better at the hardware store. 2. If you want this thing to be securely mounted, you should put it into a board that is long enough to straddle two studs and mount the whole thing to the wall. The photo is attached for reference.

👤The bicycle hangers should work for most bikes. I like the fact that you can adjust the hangers to fit different sizes of bikes, and that is something that is common on many newer bikes. I bought two of these. The padding on the arms of my steel frame bike is fine, but I decided to add a piece of old inner tube over the grey plastic parts for the one I am using with my carbon frame, because the top tube is wider than the padded part between the hard grey plastic pieces. I will probably add inner tubing to the second cradle. I used a board that was 36 inches long and T-nuts to mount the hangers onto, I attached the boards to 2 studs each for support. It allows for a place to put clothes hooks.

👤These are the racks that I like the most. We used a mix of plaster and drywall on the wall, but the stud was located exactly where we needed it, so it was easy to install, though the spacing of the screw holes on the top might be too wide for some studs. Our house was built in 1912, so we might have had an actual 2” wide stud. I am docking it for a couple reasons. The o-ring on the included strap for stabilizing the front wheel is not the same as shown in the video. It's hard to get tight if you don't have the o-ring. There are two more There were 5 washers in the hardware pack. The instructions show the small washers being used with the two Allen screws along the arm, but there is no mention of the other three washers. We assumed they were to be used with the wall mount screws, so we added it to your instructions. The listing picture shows 3 washers. There are 3 more When you only need 2, the listing shows 3 allen screws. There are four The screws were not in working order. What reality would these work in? It would make perfect sense that the listing shows lag nuts. The countersunk screws are useless because they have to be flat against the wall mount. I found some cap screws from my own collection.

7. Bike Wall Mount Commercial Diameter

Bike Wall Mount Commercial Diameter

Prime some day with the deal code: WXAOW9V8. The bike wall mount is stylish and keeps your home in order. The bike hanger keeps your walls clean from tire marks. Heavy-DUTY and Rust Proof. The bike hooks for garage are made of durable steel. It can hold up to 65 lbs. Holds almost any bike. Their bicycle storage can hold up to 3” tires. Fat tire bikes are not stable. It's a breeze if you INSTALLING. The bike holder has upgraded hardware and a great manual. Only on sturdy walls can you mount. It's a breeze if you INSTALLING. The bike holder has upgraded hardware and a great manual. Only on sturdy walls can you mount.

Brand: Hang Your Bike

👤The bikes were in the garage. Hanging them was our next best option because they were never in the right place. The bikes are in the back of the garage and not in the way.

👤The product is easy to install and the shipping was fast. I'm happy with them.

👤Three of the bikes needed to be hung from the wall. We have tried many bike mounts and have found one that works for us. This is the best one we have tried. It stays on the wall. You can put the bike back when you are done with it. Thank you for the mounts.

👤These are great for saving space and keeping your wall clean. It was easy to install and improve our garage organization. It was recommended to be 200%.

👤It is easy to install the Sturdy Materials within a few minutes. The rear wheel has a wall guard.

8. Dirza Bike Wall Mount Rack

Dirza Bike Wall Mount Rack

Most bike types are compatible with their bike hooks. Can hold bikes up to 55 lbs. Can fit most wheel sizes. The max tire width is 2.4". Also, note: Use wall stud for the best results. TIRE TRAY: The tire tray on the wall mount bike rack keeps the wall clean and makes the bikes look better. The bike hanger is easy to install. The bike storage system is suitable for any size of stud, because of the straight line screw mounting holes. The space saver is located in the middle of the room. If you want to keep your garage clean and tidy, you can get the bike off the floor by using their bike hanger which is great for apartments, garage, indoor and small room. The wall mount bike storage system is not compatible with bicycles with tire width over 2.5" Strong and safe. The bike hook is made of heavy duty iron and weighs up to 1.25 lbs per unit, which means it won't bend and last forever. The bike holder has an excellent suspension capacity with a single bike holder bearing up to 65 lbs. The unique safety hook design makes it hard to accidentally release the bike, but it's easy to store and detach the bike. High quality. The garage bike rack has a rubber cover on it to protect the bicycle wheel from being scratched. The design of theangled hook makes it easy to hang and take off the bike, but also uses the force of the wall to diffuse the pressure of the bike wheel. Good service. They are behind their products. The bike is built to last. Their service team can help their customers. You can contact them if you have a question. They're happy to help. The bike storage system needs to be installed on a concrete wall or a stud behind it.

Brand: Dirza

👤I wanted to hang a bike indoors to free up some floor space in a small home. This is what I was looking for. It's easy to install, great hold on the bike. Installation instructions say to put it on a stud, even though the anchors are included. Although I put it on a stud, I think a light racing bike would work well with the anchors. The included hardware is bad according to some reviews of a related product. Don't think that's the case anymore. I received different screws than the ones in the reviews, and they drove into my studs without any issues. The plastic rear wheel guard is cheap. If I were to buy again, I would probably get the hook and put a felt pad at the rear wheel's contact point.

👤A great bicycle hang up. It's easy to install. If you don't drill a large and deep enough pilot hole, the screw heads will strip, and the mounting screw isn't the best. The back wheel tray is made of plastic. I would have paid more to get a rack with the bottom wheel tray that was the same material as the front wheel. I don't understand the cost saving decisions that manufacturers make.

👤It's easy to install and great for what I need.

👤I like the wall mount bike rack. The hook is made of rubber coated metal and the base is made of high impact plastic. The mounts were easy to install, but I used my own dry wall screws instead of the standard ones. The hooks are difficult to use with larger mountain bike wheels and I would confer with the previous reviews to see if they were worth the trouble. The tires fit, but they are snug and need a little more heft to put the wheel on and off the hook. The hook would have to be bent if my tires were larger. It would rip out of the wall the first time you tried to remove the bike from the mount. The Dirza wall bike mount rack is very good for the price.

👤This is for regular wheels. If your tires are larger than 40mm, you might be in trouble. The buyer should beware.

👤The stand is sturdy. It is a simple item. You should be fine if you screw them to the stud. The plastic covering on the bike is slightly loose and needs to be adjusted every time you load it.

9. Youjia Vertical Bicycles Hanging Storage

Youjia Vertical Bicycles Hanging Storage

Over 200,000 cyclists trust Michelangelo bike storage racks. Delta is the brand you can trust with best-in-class U.S. based customer support. Smooth Powder coated is made of high-quality steel and heat-treated powder coating technology. The bike hanger has a uniform coating that makes it look good. The rubber-coated hooks on the wall mount bicycles hanging rack protect the bike rim from scratches or slips. The vertical bike hook allows you to easily store and retrieve the bicycle in a few seconds, freeing up extra storage space in garage, indoor or outdoor sheds and terrace areas. Before you start, find the correct height position. Attach the studs, tighten the screws, and drill holes in the wall. It can be installed on any wall. The maximum hanging weight is 66 lbs. It is strong enough for most types of bicycles. The maximum hanging weight is 66 lbs. It is strong enough for most types of bicycles.

Brand: Youjia

👤They are good. I tried both of them in a stud. If you want to go into wood, you need to strip the screws from the wall. The bike ripped the mount out of the wall.

👤The reviewers have said to replace the wall anchors. They are useless. I am pretty sure this won't hold my mountain bike, which weighs 32 lbs, well below the products stated 65 lbs capacity. The physics of how these go on the wall are part of it. The top anchor is pulled away from the wall by the weight of the bike. The wider tires of a mountain bike will struggle to fit under the hook. I gave it four stars because I like these for my road bikes. If the mountain bike was my only bike, these would be one star because it is as low as you can go.

👤We have 11 bikes in our garage. In order to get stuff off the floor. I searched for a bike hanging solution. I decided on this because it seems very simple. I asked my engineer husband to install the hooks I showed him. He told me that he loved them and was very impressed by the simple yet effective design. I'm happy!

👤We had a mess of a bike tangle in the shed, only dad can take the bikes out and we were looking to implement an easy bike storage and organization that a 7 yo can help themselves and does not break the bank. The rubber coating on the hooks is easy to glide through the tire of the bike, and comes with hardware options for your wall.

👤The garage was recently reorganized and the bikes were removed from the way. The wall anchors that come with the hangers, heavy duty, definitely did the trick, even into a block wall.

👤It's easy to install. If you install these into wall studs, you want to get better screws, because the hardware is OK if you do a standard install. They look really nice, and are a great bargain compared to other bike storage solutions. You will need a solution for the tire marks on the wall after hanging your bike on them, or you can just clean it.

👤It is easy to install and perform. It seems like they will last the life of the bike. There is a Do not use the shears. The heads come off when tightened. There is a happy with purchase

10. StoreYourBoard Bicycles Heavy Duty Organizer Vertical

StoreYourBoard Bicycles Heavy Duty Organizer Vertical

The garage bike rack is easy to install. It can be done with a drill bit and screwdriver. The bicycle wall mount should be placed on a strong column, beam, masonry or concrete wall. Unless there are wooden pegs behind it, don't install the bicycle hanger on a wall. Please contact them if you have any questions. The 2-piece garage wall mount holds up to 8 bicycles for easy-to-access storage. Industrial steel is made from solid steel and welded together as a solid rack to hang up to 8 bikes and 400 pounds total. The powder- coating lasts a lifetime. The rubber-coated hooks hold bikes by the wheel with a secure grip. New and improved mounting hardware is easy to install. The wall stud spacing is standard. There is a patent pending design. It was built to hold your bikes. There is a patent pending design. It was built to hold your bikes.

Brand: Storeyourboard

👤My parents have a lot of bikes, so I ordered an 8 rack bike wall storage rack. It arrived in two sets of four, including the necessary hardware. The bikes were taking up a lot of space. They had to be mounted on the wall to free up floor space. The rack is solid if you hit the studs with the screws. The easiest part was hanging the bikes. My parents are very happy with the look of it. Thank you for the fast shipping!

👤The bike rack can hold a lot of weight, but you need to use the bolts that come with it. Make sure you bolt into a thick surface that can hold the weight. The first attempt was a failure, as we used our own hardware and all three bikes broke away. We used the large bolts that came with the purchase. The rack is heavy so you will need two people to install it. The bikes fit perfectly. We have a wide spread mountain bike handle bars.

👤We bought this for our family bikes, we have 2 adult bikes that are spread out, and 3 kids bikes, plenty of room, seems strong, happy with purchase.

👤The hanging hooks are the perfect length and shape to hang bikes. The spacing of the hooks makes it easy for 4 bikes to be stored on the hook. I put it off the floor to make it easier to get my bike on or off. This is the best way to tidy up bike storage.

👤The bicycle rack is sturdy and holds bikes well. It was easy to assemble. The screw heads are small which makes the sockets slip.

👤The rack works well. It was easy to install. It helped us clean up the mess of bikes in our garage. The 2 pack is a great deal. My 10 year old is able to get his bike down by himself when we put one rack lower for our kids. We are getting there, but still need help putting it back up.

👤The bike rack is ready to install. It seems sturdy.

11. Delta Michelangelo Two Bike Gravity Stand

Delta Michelangelo Two Bike Gravity Stand

It isdurable: The bike workstand was released to the market for a long time. One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack. Bike storage is space saving. The Michelangelo 2 bike rack garage uses gravity to secure up to 2 bikes. The assembly was easy. The Michelangelo garage bike rack is easy to install. Assembly Hardware and a wall strap are included. In Minutes. Arms Accommodate Any Bike Size Or Style, Up To 40Lbs. The support arms are repositioned with a simple twist, which makes it easy to adjust. This large capacity vertical bike rack is made of quality steel and holds up to 2 bikes and a total weight of 80 lbs. The rubber feet keep the bike rack in place.

Brand: Delta Cycle & Home

👤I had high hopes for this bike rack. The stand will work perfectly despite the flimsy look, according to all of the reviews. Wrong. I have a small hybrid bike. My boyfriend has a bike. We could not get the bike to hold the bikes in place, which is a reasonable expectation for a small and Medium sized bike. There is a The older reviews seem to have been before the materials were changed. The rack I received had no red details. The grey grip that should hold everything is meaningless. When we put a bike on the rack, the arms that are on the frame start to slide so that both arms are on one side, and the bike slides over and one tire rests on the floor. Adding a second bike on top is a bigger disaster as that bike does the same thing and it rests a tire on the bottom bike, looks hideous, and I might as well have leaned the bikes on the wall. I tried spacing the arms further apart, swapped the bike places, but with the arms sliding wherever they please, it just wasn't working. It's a hassle and a waste of time to return it. I was looking forward to being able to store the bikes indoors, but I'm disappointed. The search is on.

👤It doesn't seem like it should work, but it does and it's amazing! It took a couple minutes to put the stand together. It leans against my wall and takes up very little space. I think it looks cool that I can get my bike up and out of the way. Everyone is surprised when they first see it and they have to touch it to believe it's strong. There is no chance of the stand tipping over because the bike is pulled towards the wall. I think this is a cool, well designed product and would recommend it to anyone looking to free up some space and store their bikes.

👤I don't feel very enthusiastic about this stand. It does the job, but has some design flaws. I'm not sorry I bought it, but I probably wouldn't buy another one. It does get the job done and is cheap compared to other bike stands. It was not easy to install the screws. The two pieces were not aligned correctly. There was no way to get the angle right to screw it in. Since gravity keeps the top piece on its own, I have set it up with a missing screw. It has not collapsed in 2 months. There is a The feet are not very stable. I have it on a hardwood floor, and I have noticed that it slowly slides forward over time. I have had to pull down my bikes, adjust the rack, and replace them twice because it had slipped too far for comfort. I might need to change the shoes for it. If I'd secured the top part to the wall with a screw, I might not have had this problem. There is a The bad news is that it doesn't hold my bikes well. The handles stayed put after I arranged them. The first day was rough, and I had a hard time getting the handle positioning right. Your bike's geometry and weight distribution will affect the relative heights of the handles. Try to angle them as far out as possible. I wish there was an extra piece to keep the front wheels in place, because they can turn and damage the wall. I rigged up a utility hook between the top front wheel and the wall to prevent this, but it's a little awkward. The utility hooks are not made for this purpose and are a bit too short, but they get the job done with a bag hanging off it. There is a It's a decent product. It works, but not fancy. It's cheap.

Summary

What is the best product for bicycle wall mount vertical?

Bicycle wall mount vertical products from Lycaon. In this article about bicycle wall mount vertical you can see why people choose the product. Egofy and Gootus are also good brands to look for when you are finding bicycle wall mount vertical.

What are the best brands for bicycle wall mount vertical?

Lycaon, Egofy and Gootus are some of the best brands that chosen by people for bicycle wall mount vertical. Find the detail in this article. Koova, Laxama and Ibera are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com