Lifetime warranty is provided by them and they stand behind their product. If you don't like it, just return and they will give you a full refund. The finish rails and sleeves hooks are coated with a powder. Bike storage solutions are custom. A rail interlock design. You can display or hang your bike with the help of the rails and hooks. The snap hook design of Torack makes it easy to adjust the hook spacing. Bike wall racks for garage organizers make it easy to organize and clean your home and garage by getting your bikes off the floor. The 6 bike rack saves space. There are wide size hooks for bikes. Hang up fat bike tires. It's suitable for mountain bikes, road bikes, folding bikes, hybrid bikes, adult bikes, and kids bikes, scooters, etc. Hanging up and taking down your bike is easy with wide size hooks. The material isdurable. There are rails and sleeves coated with rubber. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction is used for safety loading. GS is certified. It's safe. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included.
👤I think spacing each section to separate the joists worked well so far, but I think having the entire 6 bikes would have been too tight. I was able to hang at different heights to make it easier for the kids to hang their bikes. The install was easy with 4 screws. I didn't need to use the mollys that came with it because I don't have drywall hung.
👤Can you hang 6 bikes? The rack is mounted side-by-side and flush together, not as pictured on the product page. It's important to center each rack across the wall studs, or mount it on wood panels that are anchored into the wall studs. Two bikes can fit on each section, but there needs to be spacing between the racks. There is a The rack system is not designed for bicycles. The literature that comes with the rack doesn't even mention bicycles. It's safe to say that bikes are the heaviest thing this rack system can handle, and proper mounting is important for stability and safety. Hanging and removing bikes from the rack takes care; pulling down on the bike could cause injury or even break the hook. I don't want my younger kids doing it, so only larger bikes will be mounted at our house. There is a Measure your bike and take note of the top of the tire to determine how high to mount the rack. The bottom of the rack should be mounted below the front tire. I eyeballed the 3-inch approximation because my wall is unfinished. Use a level to draw a line on two studs after you mark the desired mounting position/height. Place the rack between the studs. To mark the screw position, use the rack as a template. How close are the screw holes to the edge? It needs to be about an inch wider for standard wall stud mounting, that's my biggest complaint with this product. Make sure the holes are pre-drilled to make sure the screws are straight and the studs don't split. Once the rack is mounted, pop two large hooks on each end. Different size bikes should be mounted side-by-side on the same rack. I think this is a 4 vs 5 stars because the racks are not wide enough for optimal mounting on studs, and I am concerned that bicycle weight may be pushing the design limits.
👤Hardware for "brick walla only" is included in the packaging. This won't work if you are a majority of the rest of us and you have a garage. The holes in each panel are drilled at the center, so you're not going to find 2 studs to mount this to. The panels would have been a great product if they had made them longer, but they either cheaped out or made a mistake in manufacturing and sold them anyway. I wish I opened the box and started the project 2 weeks ago, when I was still in the return window.
👤The construction of our garage made the installation a bit complicated. Our garage was built with 24 on center studs, but the product is made for 16 on center stud construction. This meant attaching the unit to the 2x6 and covering the studs needed to hold it. The unit screws were not attached to the 2x4 because it was not wide enough. We put five adult-sized bikes on the rack, with handlebars alternating up and down. It's a lot of weight, but it holds up. Our teenage girls can handle bikes on their own, even though it can be difficult to put up and take down one at a time. I no longer have to lift large bikes over my head to hang them from the ceiling because of the amount of floor space it saves. If a person is concerned about the tires marking the wall up, then a high gloss paint should be applied first so you can clean it up every once in a while. This was a great purchase.
Some customers don't know how to use expansion screws, which causes the hooks to fall off. Please use a drill bit. As thick as the screw. You can learn how to use expansion screws on the video site. If you want to fix the wood, please use only screws. The design is strong and durable. The wall mount is scratch-proof. The bike holder is fireproof, waterproof, and rustproof. The angle of the bike wall hanger can be adjusted to keep your bike level. Save space and store your bike quickly. The garage is messy. The Bike Wall Mount is a great way to keep your space neat. It's suitable for apartments, homes, and more. Most bike types are compatible with this. The design is anti-scraTCH. The double U" shape arm cradles and round cap are made from soft TPR material that will not scratch your bike. The 4.3 Ft portable mini bicycle lock is for preventing front wheel knocks against the wall. Installation instructions and mounting screws are included. The extendable beam can be adjusted to fit all environments and widths of bicycles, secured using a push button mechanism. INSTALLATION ADVICE The wall mounting brackets should be fixed to concrete, masonry, or wooden walls. Lock the handle bar in place if you want it to not hit the wall. INSTALLATION ADVICE The wall mounting brackets should be fixed to concrete, masonry, or wooden walls. Lock the handle bar in place if you want it to not hit the wall.
👤I made the right decision after taking a chance on this wall mount. I bought this to hold my e-bike. It works well for my bike. It's easy to manage and very secure. Doesn't affect my parking in the garage.
Keep your garage or indoor space tidy and free up your floor space by storing your bike in a convenient location. Their wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Most bike types have a storage system. The bikes can hold up to 22 kilogram. Not suitable for bikes with wide handlebars (31 inches / 78 cm) or fat bikes. It is safe and secure to store your bike in a horizontal position. The wall mount is made from strong steel. The bike arm locking mechanism uses a reliable gear system. The angle of the wall hanger can be adjusted to keep your bike level. Installation instructions and mounting screws are included. The push button lock system ensures that the frames can be secured, and the cradle arms ensure that all the frames can be accommodated. A secure push button mechanism secures the extendable beam from 8.7 inches up to 12.6 inches. The Armcradles are made from soft TPR rubber material that will not scratch your bike. The frames are protected and the tube shapes are not marked or moved. To prevent front wheel from knocking against your wall, you need a rope that is strong and elastic. If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it.
👤The rack is nice. It is built out of quality materials and has a lot of flexibility. The mounting points for this rack are a bit odd. They provide you with 3 small screws and masonry wall anchors, when they should have provided a beefier faceplate and 2 lag bolts to mount into a stud. My solution was to take a piece of scrap wood and mount it vertically to a stud using 2 heavy duty lag bolts, then mount the original screws to the wood. The rack gets 5 stars from me.
👤I was concerned my handlebars were too long for your wall mount, so I sent Chris a letter. To make sure they fit, I put a 2x6 board on my wall stud and then put a wall hanger on the board. It allowed plenty of room for the handlebars. There is a I had a problem attaching the hanger to the studs behind the plaster board. There is a one and three-eights inch distance between the wall hanger's two holes. The wall thickness is one and one-half inches. There is no time to get a strong attachment with only a quarter inch overlap. The instructions give a good idea of how to install the hanger on the wall. They warn that the plasterboard won't support the hanger. Very true. The wall stud's width is insufficient. Instructions to attach a 2x6 to a wall stud and then attach a hanger to that board were added by me. There is a The cradles for the bike are red or black, which is a point of favor for the Pro Bike system. The shape of your cradles allows room for the control cables if the bike has them beneath the cross bar. Great feature. There is a Thanks for your help. I hope my experience is useful to others. You have a good product.
👤Highly recommend this bike storage system. Enough about how great it is. I want to know how to install it. You probably do as well. I installed 3 holders. The first thing to do was to find the studs. To double check the exact location of the stud, I used a finishing nail and hammer to find the sides of the stud. I was glad I did because some of the stud finders locations weren't right. There is a You can mount the 3 holes of the brackets into one stud with longer screws than those that come with the kit. Some people have said this works. It didn't seem like it would be stable. I decided to mount a 2x6 across two studs. A 2x4 is not wide enough. I cut the 2x6's 22” long so they fit over the end of each stud. I used lag screws to attach the 2x6's to the studs. I used lag screws on both ends. There is a You will need a impact driver to get the lag screws into the stud. A regular drill won't do it. If you don't have an impact driver, you can always use a sockets wrench. After I tightened the lag screws down, I had to use a sockets for the 5/16 lag screw. I measured the bikes with the holder to make sure there was enough space between them. The measurement resulted in a spacing of 40” from the top of one board to the top of the next board. It was perfect for my bikes. Different spacing is required for your bikes. The wall mounts are perfect. Unlike other systems that are horizontal, these allow you to adjust the arms to fit the different types of cross members as not all bikes are alike. I think they are worth the money. The 2x6x8 was $11 and the 12 lag screws were $9. If you decide to purchase these, I hope this helps.
ORDER NOW, WORRY-FREE! They can provide a 5-year warranty because they're so confident in the product quality. The hook can fit for all types of bicycles by adjusting the screw and keeping the bike level, like mountain bikes, road bikes etc. The hook length can be adjusted to fit the distance between the bicycle and the wall. The length of their bicycle rack before and after adjustment is 13 and 17 inches, respectively. It holds bikes up to 30KG. When using a bicycle wall mount, put the beam down and put the bike on it. The hook can be folded up when not in use. It works well in your home and more. The arm of the wall mount bicycle hanger has a rubber cover to protect against bike paint damage. The sturdy and durable construction is designed to protect you bike better by holding the bike frame instead of the rim. Installation tips include attaching the hanger to the wall with anchors. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. The yellow screw is used for the wooden wall. Installation tips include attaching the hanger to the wall with anchors. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. The yellow screw is used for the wooden wall.
Every customer has a premium after-sale service. If you don't like their products, you could get excellent customer support. They will provide top level customer support and stand behind their bike hooks. You will not regret your choice if you just have a try. 2 pack wall mount bike hanger is used to conserve more space for storage and display your bike like works of art in any room. The bike rack has a maximum hanging weight of 77lb. It protects you bike better by holding the bike frame instead of the rim. The bike holder can be horizontal or vertical. It's out of the way in your garage and indoor shed. The wall has a mount on it. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. The arm hanger is made of soft red rubber to protect against paint damage. It is strong enough to fit most bike frames, and large enough to fit children's bikes.
👤Works well! It was easy to install and looks good. It is a great deal for a two-pack of these. I put the included bolts into the studs behind the drywall in my garage. I used a 9/64” drill bit for the pilot hole. I used a 10mm sockets to screw them in.
👤Didn't come with instructions. It was a metal but it was not strong. Installation in a home is not realistic. The product is listed on Amazon with a different name, probably because it is not good.
👤The first time the bike was put on the brackets, the metal slightly bent. Not heavy duty.
👤I bought items that were already used and damaged. The new items have the same problems and are damaged. All the items are damaged and bent, so I asked for a refund. Please, check the photos, I don't recommend them, I won't buy again.
👤I had to place it at an angle. The bike does not have a bar.
👤The wall mounts were not supplied with enough screws and the wall anchors were too big. One wall mount is missing.
👤Extension screws do not come with this rack.
👤The stallation was straight forward. It's easy to install. Work that is described.
It's easy to install on your bike, just loosen the lock on the bike and tighten the screw, it's a great choice to replace the damaged bike kickstand. It's the perfect accessory for your bike trips. The bike hooks for the garage are designed with a special coating to prevent accidental cracks or scratches. The hooks can hold up to 50LB. There is free up floor space. The bike rack is horizontal. It frees up garage floor space by keeping bike off the floor. It's perfect for a garage, home, orshed. It's verSATILITY. The bike hanger can be used indoors and outdoors for all kinds of bicycles. You can use it as a bike repair stand. It's a good choice for storing and holding your bikes. It is easy to install the bike rack by one person using common household tools. Make sure that you install the bicycle hanger on solid walls only. If you have any questions about their products, email them and they will respond as soon as possible. If you have any questions about their products, email them and they will respond as soon as possible.
👤It's what you see. It is easy to install. There are 2 sets for kids and 2 for adults. The arms only go up and down when not holding a bike. You have to figure out where the hooks are to balance the bike on the wall. It was easy on a bike.
If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it. There is space for saving. The bike rack is designed to be hung on the wall to save space. Please mount on the wall. It is easy to fold up when not in use, saving a lot of space in the garage. Anti-scrutch cover. The arm hanger is made of soft rubber to protect against paint damage. STURDY: The bike rack is 3 lbs. The limit is 38 pounds. Large arm holder for bikes. Not for a woman's bike. The solution is perFCt. You can display your bike in any room with a wall mount bike rack.
👤These were bought to hang my bikes. They seem well built and work well. There are two screws on each hanger. You will need a drill and a stud finder. I can't remember what it was.
👤I bought this wall mount to hang my bike out of the way. I was not impressed with the construction, but it worked as advertised and I was happy with it. I decided to purchase another one in order to get my wife's bike out of the way. The second wall mount I received was sagged and leaned forward, making it appear as if the bike was falling and way to heavy for the mount. The issues were resolved quickly after I was contacted by their customer service. The company is enjoyable to work with.
👤I bought my first one a year ago. I ordered another for my Salsa because it worked well and it got crushed by lawn equipment. My only suggestion is that the directions have the right tools for the job.
👤I have a drill set with these but the one sent was too big, reviews said it takes screws, I need a nut driver. I was told I could just screw them into the wall, but I have to get a proper tool. Not good. I put the bike rack up after bringing a nut driver. It's very sturdy and easy to put up.
👤I bought 2 wall mount brackets. After mounting them on the wall, one held up well, the other collapsed under the weight of the bike. The make and model of mountain bike are the same. The mount tube and hooks are bent up from the bike's weight on the metal tab on the mounting brackets. The second hanger does not work. I think quality control is poor.
👤I needed to hang my bike in the garage. This is the way to go. The hook is very well made. The hook lifts up and out of the way when the bike is on the ground. The hook doesn't go against the wall, but it still does what it was made to do and that is to hold your bike. If you use strong molleys and go into a beam you should not have a problem. I used 61lb concrete molleys and no issues at all. I would highly recommend this product.
👤The DIRZA BIKE HANGER works. It keeps the bike in place out of doors, and when I leave Florida, it folds up and saves space. I've been riding bikes for 60 years, but this one is the easiest to install and lift into place. I used a drill to mount the 40 year old STUCCO on the hangar. Worked well.
👤I don't like receiving items that don't match and I rely on the photo. The angle is gentle. This means that the wall brackets are not completely flush to the wall. It seems fine after I attached it. I think the older design is stronger. Can the manufacturer assure consumers that the strength has not been compromised by the design change? I don't like getting something that looks different. It was easy to install, but the strength is questionable at this point.
This large capacity vertical bike rack is made of quality steel and holds up to 2 bikes and a total weight of 80 lbs. The rubber feet keep the bike rack in place. The wall hanger's angle can be adjusted to keep your bike level. The correct height for the tyres should be at least 4 inches off the ground. The mount must be mounted on the side up. A horizontal wall mount for a single bike to save floor space. The weight limit. 38.6 pounds. The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall. The double arm is padded to protect against paint damage. It's suitable for most bike frames. The beam length can be adjusted to fit narrow or wide handlebars. The wall has a mount on it. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. If you have any questions about the installation, seek professional help.
👤I am a mechanical engineer, and I feel qualified to evaluate this product. There are many reviews that praise the quality of the bike hanger, but I don't have much to say. I would have made the product from steel and supplied the frame rests or spacers for the wider frames tubing. I would like to defend this product from the many reviewers who thought it was a bad idea to fall off the wall. Did you read the directions? It says to use the anchors only in concrete walls. The complainers stuck the anchors in the wall. I advise you to stop blaming others for your fault. If you don't know what you're doing, you can either learn or read the instructions. There is a picture of a proper installation. The plywood spans between the studs, giving many options for placement. The lower side is in compression, so the 4 screws are on the upper side. There is a Good luck to everyone, and safe ride!
👤I put up three of these in my house and I am very happy. I have some advice. Don't use the screws in the package. Get something better at the hardware store. 2. If you want this thing to be securely mounted, you should put it into a board that is long enough to straddle two studs and mount the whole thing to the wall. The photo is attached for reference.
👤The bicycle hangers should work for most bikes. I like the fact that you can adjust the hangers to fit different sizes of bikes, and that is something that is common on many newer bikes. I bought two of these. The padding on the arms of my steel frame bike is fine, but I decided to add a piece of old inner tube over the grey plastic parts for the one I am using with my carbon frame, because the top tube is wider than the padded part between the hard grey plastic pieces. I will probably add inner tubing to the second cradle. I used a board that was 36 inches long and T-nuts to mount the hangers onto, I attached the boards to 2 studs each for support. It allows for a place to put clothes hooks.
👤These are the racks that I like the most. We used a mix of plaster and drywall on the wall, but the stud was located exactly where we needed it, so it was easy to install, though the spacing of the screw holes on the top might be too wide for some studs. Our house was built in 1912, so we might have had an actual 2” wide stud. I am docking it for a couple reasons. The o-ring on the included strap for stabilizing the front wheel is not the same as shown in the video. It's hard to get tight if you don't have the o-ring. There are two more There were 5 washers in the hardware pack. The instructions show the small washers being used with the two Allen screws along the arm, but there is no mention of the other three washers. We assumed they were to be used with the wall mount screws, so we added it to your instructions. The listing picture shows 3 washers. There are 3 more When you only need 2, the listing shows 3 allen screws. There are four The screws were not in working order. What reality would these work in? It would make perfect sense that the listing shows lag nuts. The countersunk screws are useless because they have to be flat against the wall mount. I found some cap screws from my own collection.
100% money back guarantee. There is a quality guarantee for 12 months. They want you to be happy with your new Bike Wall Mount and they will do everything in their power to make sure you are happy. They will take care of you if you are not completely satisfied with your bike rack. The bike was stolen. This is a perfect bike hangers for garage and it has a unique plywood design that will fit right in. There is insect protection. The rubber padding on the wall mount bike rack protects the bicycle frame from damage while it's mounted. You can change it anywhere. The bike wall mount can be used in the garage or in the living room. The bike mount wall wood comes with a complete user manual and is easy to install. The bike rack garage wall mount is built to last and has quality components that will stand up to the wear and tear that comes with frequent use. Give yourself or a loved one the ultimate bicycle storage solution with their bike rack. The bike rack garage wall mount is built to last and has quality components that will stand up to the wear and tear that comes with frequent use. Give yourself or a loved one the ultimate bicycle storage solution with their bike rack.
👤The rack is great, but don't use the hardware they send with it. The anchors are terrible. They are not the correct anchors for a standard install. If you want to use a stabilizer in your anchors, you should pick up ones that are smooth on the sides and pull out about an inch before they grab anything to hold the mount in place. I had to patch my wall, buy new anchors, and try again after trying these, because it ripped straight out of the wall.
👤Installation should be easy if you have wood studs. I found the installation process easy because I have a background in wood working. A piece of paper with information regarding drill bit sizes to drill in your wall would be helpful to the person who doesn't have a background in basic installation. I am very happy with the function of the room, as well as being able to stay consistent with the wood look of the room. I think it's a great idea.
👤The anchors that it comes with are not what you would need for gypsum board. The wood might be eaten by the screw head if you get heavy duty anchors and washers. If you have a wood stud, you can go. Don't use metal stud. Go and get some butterfly anchors.
👤The man had to make a trip to my local depot store. The American Stud walls have long screws. Buy the nails yourself.
👤It is best for carbon bikes under 25 lbs. Make sure you put it in the stud. There is a I like the way it looks.
👤One of the two we bought was broken. The replacement was delivered a few days ago. They have a bike hanging on them. We're happy with the look and would recommend them. I wouldn't install these in a stud or concrete wall. You'll be able to rip out the wallboard. We're happy with the look and would recommend them.
👤The screws are not amazing, but the stand is great. If you have a concrete wall, get some Tapcon anchors. It goes well with my walnut mid century modern furniture aesthetic.
If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it. The world's smallest bike rack. You can easily mount to any wall or surface. You can hold your bike against any surface. The tire has to rest on the ground. There are five sizes to fit most bikes. It increases usable floor area and has a minimal profile. No hooks, straps, bars or other equipment is needed. Installation and mounting hardware is included.
👤We needed a way to efficiently store our bikes without taking up a lot of space in our apartment or putting anchor holes in the wall. I installed 3 of the CLUGs to a section of the painted baseboards. I used CommandStrips to adhere the trim to the wall. I can take my snazzy little rack to their new home when the CommandStrips pull free because they won't damage the paint. I didn't have to worry about my damage deposit because the bikes hang perfectly, and I had a small guard at the back tire position. The CLUGs work as advertised. I had a leak in the front tire of my bike and it went flat over the last 6 months. You'll be fine if you keep your tires inflated.
👤When we moved to a new home, I wanted to find a solution for our bikes in the garage, so I picked one of these. I have a few minor issues that would cause me to not buy any others. * If you hit the bike it is likely to fall from the mount, so you need to keep your tires inflated. I have at least one bike that gets little use, but it's not a problem with bikes that are used often enough. I "fixed" the issues by adding some velcro behind the strap. This solution makes using the mount much less convenient than it could be. I will likely use cheaper screw-in rubber coated hooks instead of the CLUG because of the cost.
👤I've had issues with both the small and medium sizes of the Clug. The Clug can fit a range of tire sizes. If your tires are on the smaller size of the spectrum for your Small/Medium/ Large Clug, I can guarantee it will not fit. The product is supposed to hold it in place, but it will slide in and out without being held in place. Keep that in mind before you buy. If your bike is in the middle or upper range, then this should work. There is a The first Clug I bought was missing the wall anchor and had to be exchanged. It wasn't ideal to buy a product that doesn't include everything it's supposed to have.
👤I bought a clug for my mountain bike, which has a maxxis DHF up front. When the big knobby tire slid in without much resistance, I was a bit wary because I have another clug for my road bike that fits very snug. The plastic doesn't give you the same satisfaction when you put the tire in as it gets larger. There is a My fear was unwarranted. I think the tire will stay put if the pressure stays above 10psi. I might add a cage strap under the clug. If the tire deflates over time, a strap around it would add insurance. The larger clugs can stick the command strips to the back. They only deal with 5lb force max, so you can install them in an apartment without drilling holes. The smaller clugs will be installed into a piece of trim or wood.
There is a patent pending design. It was built to hold your bikes. No assembly is required to save space. You can hang and detach the bike with the fixed hook. It's great for shed corner and garage storage. The wall bike rack has a hook with rubber coating to protect your bicycle from scratches and a locking mechanism to prevent accidental release. Rubber cover to prevent scratches. The arm of the wall mount bicycle hanger is made of soft rubber. The sturdy and durable construction is designed to protect you bike better by holding the bike frame instead of the rim. The bike hanger has a foldable arm. It can be folded to save space. Lifetime warranty is provided by them and they stand behind their product. If you don't like it, just return and they will give you a full refund. Lifetime warranty is provided by them and they stand behind their product. If you don't like it, just return and they will give you a full refund.
👤The part that hooks up to the wall and the hook itself require a lot of force to put them together, even though the rack is solid. It was a case of slipping the "pipe" end of one into the other, but it looked like they were the same diameter. I had to ask my neighbor to connect them for me. It doesn't need to be that hard. There is a I had someone else install it on my garage wall, as my do-it-yourself skills are not very good. The spread between the top and bottom screws was too wide for the joists, so the handyman had to attach a couple of pieces of wood.
👤Modification was needed to mount securely on the wall. The mounting holes had to be replaced with new ones. It would have been difficult to get both ends to a stud. Also used larger screws. It is very secure with modifications. Overall, happy with the purchase.
👤The bike mount is very well-designed. It has a lot of metal used. The foam padding is very dense and not super thick, so it provides the necessary protection for bikes. The ability to fold up and have it catch into an upright position when not in use is really nice. Attach the brackets solidly into the wood with some appropriately sized lag bolts or heavy-duty screws. I'm not a fan of the anchor bolts that come with them, so use your judgement on what works best for you. I'm sure you'll be happy with how it functions if you mount it correctly. I know I am.
👤I bought two of these for my new home and one was torn out of the wall this morning. The screws it came with were not as strong as the ones I used. I think it comes out too far from the wall, and that the weight of the bike made it fail. I have to fix the price and damage.
👤I like everything but the wall anchor screws. Better directions are needed. I had to find out how to use them. Good product. It's worth the money.
👤This is what I was looking for. Very happy.
👤Is this supposed to have screws? Flat nail heads are on the wall. The instructions are not very clear. If this is fixed, I will update.
Bicycle wall hanger horizontal products from Torack. In this article about bicycle wall hanger horizontal you can see why people choose the product. Roadgive and Pro Bike Tool are also good brands to look for when you are finding bicycle wall hanger horizontal.
Torack, Roadgive and Pro Bike Tool are some of the best brands that chosen by people for bicycle wall hanger horizontal. Find the detail in this article. Muduo, Yarlung and Stormann are also brands that their products are worth to check.