Not included: UMBRELLA. The umbrellas that the unit fits are larger than 1 1/4" and less than 1 7/8". There is no need to loosen the bolts in the umbrella bar holder. To loosen or tighten the small nuts, you don't need a wrench. You could attach it in any location. It is possible to adjust the height. The pole can be pulled through the height. The UMBRELLA CLIP is adjusted. The clip can be adjusted to fit your umbrella holder. The umbrella handle max dia is 0.67 inch. Make sure your handle is workable by checking it with your dia. There are multiple functions. It can be used on a deck chair. Excellent strength and resilience- plastic and steel.
👤I'm an 84 year old man and I take a walk with my rollator every day except when it's snowing. Light rain is not bad. I don't like to get soaked when it pours. I would need a third hand to hold an umbrella and this device acts as a third hand. Attaching the umbrella to the rollator is easy. I'm 5' 10 and there's a caveat. You need a standard umbrella. Unless you don't mind walking bent over, a folding umbrella is too short.
👤. There is a This umbrella mount holder is an essential item to hold umbrellas, it does not require tools to install. If you get caught in snow or rain after a nuclear critical incident. The "BAGAIL Golf Umbrella" model can be found on the Amazon pages. You will be able to manually transport those who God placed under your stewardship if you attach most "Deer Carts" with this holder. You should keep this item along with your Tyvek coveralls, gas mask, and Go Bag at work.
👤It doesn't fit my wheelchairs. There is not an extra joint in the directions. That is okay. It would have made the fit better. It was difficult to attach because directions did not have enough information, but also because it was a pain. The part that holds the umbrella is not very good. You have to make the umbrella tight to hold it up. I am very disappointed. My search for water in a wheelchair continues.
👤It seems to be strong. I use it on my stroller to block the sun. It's perfect! There is a It's work for my umbrella. The longer screws should be suitable for the wide handled umbrella. There is a I don't recommend this if you have a wide bar handle. My stroller's handle is small. The bar should not be working if it handles more than a couple of inches. There is a I like it, it works perfectly, it is very easy to attach or detach, I could use it anywhere.
👤The mount attachment works well on wheelchairs and strollers, but the umbrella gripper does not work well on umbrella sizes other than a purse or single person size. The attendant should be protected from the sun or shaded. Since the umbrella is still low, you will not be able to see well if you are tall. 3 stars because it stays attached to the chair or stroller well and is sturdy, but just wish it could be expanded to fit taller people and have a grip large enough to go around the metal base of a golf umbrella.
It is important. Before placing an order, please check the diameter of your umbrella and deck or rail. Only fit pole diameter up to 1.5 and deck railings thickness less than 2.3". Thank you! If you're going camping, fishing, tailgating, or for days at the beach or park, you should put a patio umbrella on your hitch. Hitch extends 35" from the hitch pin, compatible with most tailgates. You can easily install a hitch pin onto a receiver hitch. It is made of powder-coated steel. The umbrella is held in place by two thumbscrews. The umbrella is held in place by two thumbscrews.
👤I bought one of these umbrella holders for someone as a gift and we liked them so much that I bought a second one for myself. I can still lower the tailgate with the 2 inch trailer hitch on my truck. The square steel tube is thinner than a regular trailer hitch accessory so it is easier to maneuver. A 9 foot patio umbrella is easier to use than a popup shelter.
👤The design does function from the hitch point of view, but it should have been made of aluminum, as most umbrellas have a much smaller diameter. The set screws should be able to go all the way through if you set them to tight. If it had more engineering done to it, I would give it a 5 of 5 rating.
👤I bought this umbrella holder for something other than the intended purpose. We participated in a rally. This is a holder for a flag pole. We created our own flag pole with the help of a pipe. The holder worked well for that use as well. It is obvious to drivers behind us that it is a flag pole, even though it is a little further than normal. I don't recommend driving with this holder in the hitch as it would be hard to see and could cause an accident.
👤This is going to be a great event. It was very easy to set up. I can set this up on my own when my husband is not around.
👤The holder is rugged. I use it for an umbrella as well as my windsock pole. Your umbrella won't tip over in sand or dirt with this. I have a double hitch so I can use it to hold my 500 lbs storage shelf at the same time I use the holder to hold my umbrella at the beach. The square tube from the pickup truck hitch is long enough to hold the shelf without it being taken off.
👤The unit is awesome. I put the lock pin in the receiver of my truck, put the umbrella in the opening, tighten the thumbscrews and crank it open. All in less than 90 seconds. It protrudes out so I can easily pull out my grill and start cooking. It has a tiltable umbrella that gives me adequate shade while on the beach or tailgating. Money was well spent.
👤It is strong. I used the bottom insert to hold the umbrella pole in place. Even if you are careful, the end will scratch up a little when you put it into the receiver. They make it long enough for any tailgate, so I'm probably going to cut off about 10 or so.
Keep your garage or indoor space tidy and free up your floor space by storing your bike in a convenient location. Their wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Most bike types have a storage system. The bikes can hold up to 22 kilogram. Not suitable for bikes with wide handlebars (31 inches / 78 cm) or fat bikes. It is safe and secure to store your bike in a horizontal position. The wall mount is made from strong steel. The bike arm locking mechanism uses a reliable gear system. The angle of the wall hanger can be adjusted to keep your bike level. Installation instructions and mounting screws are included. The push button lock system ensures that the frames can be secured, and the cradle arms ensure that all the frames can be accommodated. A secure push button mechanism secures the extendable beam from 8.7 inches up to 12.6 inches. The Armcradles are made from soft TPR rubber material that will not scratch your bike. The frames are protected and the tube shapes are not marked or moved. To prevent front wheel from knocking against your wall, you need a rope that is strong and elastic. If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it.
👤The rack is nice. It is built out of quality materials and has a lot of flexibility. The mounting points for this rack are a bit odd. They provide you with 3 small screws and masonry wall anchors, when they should have provided a beefier faceplate and 2 lag bolts to mount into a stud. My solution was to take a piece of scrap wood and mount it vertically to a stud using 2 heavy duty lag bolts, then mount the original screws to the wood. The rack gets 5 stars from me.
👤I was concerned my handlebars were too long for your wall mount, so I sent Chris a letter. To make sure they fit, I put a 2x6 board on my wall stud and then put a wall hanger on the board. It allowed plenty of room for the handlebars. There is a I had a problem attaching the hanger to the studs behind the plaster board. There is a one and three-eights inch distance between the wall hanger's two holes. The wall thickness is one and one-half inches. There is no time to get a strong attachment with only a quarter inch overlap. The instructions give a good idea of how to install the hanger on the wall. They warn that the plasterboard won't support the hanger. Very true. The wall stud's width is insufficient. Instructions to attach a 2x6 to a wall stud and then attach a hanger to that board were added by me. There is a The cradles for the bike are red or black, which is a point of favor for the Pro Bike system. The shape of your cradles allows room for the control cables if the bike has them beneath the cross bar. Great feature. There is a Thanks for your help. I hope my experience is useful to others. You have a good product.
👤Highly recommend this bike storage system. Enough about how great it is. I want to know how to install it. You probably do as well. I installed 3 holders. The first thing to do was to find the studs. To double check the exact location of the stud, I used a finishing nail and hammer to find the sides of the stud. I was glad I did because some of the stud finders locations weren't right. There is a You can mount the 3 holes of the brackets into one stud with longer screws than those that come with the kit. Some people have said this works. It didn't seem like it would be stable. I decided to mount a 2x6 across two studs. A 2x4 is not wide enough. I cut the 2x6's 22” long so they fit over the end of each stud. I used lag screws to attach the 2x6's to the studs. I used lag screws on both ends. There is a You will need a impact driver to get the lag screws into the stud. A regular drill won't do it. If you don't have an impact driver, you can always use a sockets wrench. After I tightened the lag screws down, I had to use a sockets for the 5/16 lag screw. I measured the bikes with the holder to make sure there was enough space between them. The measurement resulted in a spacing of 40” from the top of one board to the top of the next board. It was perfect for my bikes. Different spacing is required for your bikes. The wall mounts are perfect. Unlike other systems that are horizontal, these allow you to adjust the arms to fit the different types of cross members as not all bikes are alike. I think they are worth the money. The 2x6x8 was $11 and the 12 lag screws were $9. If you decide to purchase these, I hope this helps.
The 10-year manufacturers warranty against manufacturing defects is part of the Ironclad Warranty. It's easy to install and move your bike. The torch is held on the bicycle. It's good for holding most flashlight with body diameter from 18mm to 34mm.
👤I was looking through every page of the bicycle headlamps when I found this one. The lamps were either very expensive or mediocre. I am very happy with the result of combining the two. I have a lamp that is 888-282-0465 that is less than $100. I can pop it off in a couple of seconds, and it will come back on again. I really appreciate being able to take out the flashlight, take the battery out of the flashlight, and swap it for another battery in a smart charge, so that I am ready to go. Not satisfied with the lighting? You can use a different flashlight. It works perfectly for holding my phone with my Silicone handlebar mount. I usually put it above the handlebars when I use it for the flashlight and below the handlebars when I use it for the flashlight. I see a few criticisms from other reviewers so I'll give them my take. One person was not happy with the quality and warranty service. The build quality of the mount is pretty decent, but I can't imagine anyone expecting a replacement after the first month or so. I'm not using it for crazy rough riding. It's not in a price tier that I would expect to do that with. I can imagine that it wouldn't hold up well with a heavy flashlight, but luckily you can get really nice, small flashlights for cheap these days. The flashlight could be taken. I don't expect my flashlight mount to be a security device. I wouldn't expect to be able to leave a bike locked unattended with either of the attached mounts, since even high end dedicated bike lights have quick release mounts. A reviewer said it was bulky. I can imagine that some of the nicer bike lamps would be more sleek, but I have never felt that this mount was too bulky for what it is. I'm not sure how it could be any smaller and still be able to do what it does.
👤Update on April 12, 2017: After riding off a curb, the plastic that connects the flashlight to the bike clamp completely failed, and now it's broken in half. I only used this on a road bike that I traveled a lot, but not a lot, with the weight of a flashlight straining the device. The only way to fix it would be to use glue, but it shouldn't be braking this soon and after so little use. I contacted the seller and they won't be happy with their product, even though it's been six months since they purchased it. The rating was reduced to one star because companies that don't stand by their product for a year isn't acceptable. There's a little bit of play on the bar clamp, but the flashlight is tightly fastened. It hasn't caused any problems yet, but it may become a problem over time. If you want to remove the flashlight, you just have to pull the quick release lever back and then push it back down. If you get the right amount of tightness by rotating the lever it shouldn't need to be done again unless you get a different flashlight. I can't imagine the rubber pads on the handlebars scratching my bike. There is a I'm happy with it. I would have liked to have been able to tighten it more tightly to my handlebars. I'll give it a solid 4/5 because of that. I can't complain about it's price. It paid less than $7 and I would recommend it. I've only owned it for a few days so I'll update my review if anything changes.
The Serfas headlight model numbers have a description below. The lightweight carbon fiber bar is made of durable aluminum alloy. It is suitable for a 31.8mm caliber handlebar. More items can be assembled with the super longer/extended tube. Tube diameter is 22.2mm. The body is super light.
👤I read a lot of negative reviews when I first saw this item. I picked this version because it seemed to be the most popular, and I really liked the concept. I went for a second to install on my Roubaix after buying one of these. I bought a third for my wife. There is a After reading everything from cheap to real carbon fiber... This is a quality item and I can attest to that. I have used this on three different bikes with different handle bars and not had to use the bushings. The bar is light and has a Cateye speedo/odo and a headlight. I moved the phone mount to the frame as there was only room for three accessories. The service guys were drooling over the accessory bar when I had my stumpy in the shop and asked where I got it. I don't want to discount the opinion of the people who had a bad experience with this item. I am sorry it didn't work out for you, but for me... It is the bomb.
👤They were not sure what they were thinking when they designed this. The handle bar's clamps are standard 31.8 cm so they will work on lost handlebars. The bar that is supposed to be used to mount things such as al lights is much smaller. Any thing that is designed to fit on a standard handlebars will not work. I couldn't get any of my lights to work on this because it's so small. I don't know what the function is suppose to be. There is a If you can figure out a use for it, then it is fine.
👤The bar is short. I thought the item would be shorter. There is a The risers are too short. The bar was barely high enough to fit through my fingers. There is a The little screw heads are not on the same side. I had to destroy the device to remove it. Make another bar and have a higher standoff.
👤I bought these to solve space issues with the sub brakes, which take up real estate on drop bars. The 32mm (1 1/4") handlebars were not a problem for the machined aluminum clamps, which fit nicely between the stem and the brakes. The carbon fiber tube is only about 21.5mm in diameter. I was unable to securely attach the strap-on bar mount for my computer because the mount was designed for larger diameter handlebars. I removed 47mm from the tube to keep it from interfering with the levers. I decided to use a slip-on cap instead of remounting the end plug as it makes a convenient storage spot for something small and light. A quality product. It would be great if it had a larger auxiliary tube.
👤It provides extra bar space to mount other devices. Time will tell if it is durable or not. The bar mount could be longer to allow more hand room beneath the bar and also raise a light even more to get over large front bags. As noted in another review. The bar is small. Adding padding to device mounts will make them work on it. I think bar too big is better. There is a It's worth the money.
The 4 bike rack is only for vehicles with a 2 inch trailer hitch. This product requires a Class III or IV 2 inches hitch. Allen's patented tie down system secures bicycles with 22 inch long carry arms. When the rack is not in use, the carry arms quickly fall out of the way. It is necessary for minor assembly. The rack is set up and installed in less than 5 minutes. Allen's warranty doesn't cover third-party sellers. Allen's warranty doesn't cover third-party sellers.
👤I took some time to use this product before I wrote my review because I wanted to be able to help people decide if this was right or wrong for them. Here is how I use the bike rack. We only travel about 10 miles to where we ride when we have it attached to the hitch of my truck. There is a The pros are as follows. The rack I bought was cheap. I paid $68.00 for it and it has doubled in price. It will come down again, so my suggestion is not to pay more than $68.00 for it. I've seen this happen recently. There is a I can't say how it will hold up in the weather because I only put it on the truck when I need it. This is made from heavy steel and it is not light weight so that should be a plus for its longevity. The cradles that hold the frame of the bike in place are padded so that they fit girls and odd shaped frames without having to buy the extra support bar. It uses a bolt and nut to remove the rattle instead of a locking pin. The mounting system is both pro and con. The pro is that it stops the bike rack from rattling inside of the hitch. There is a If you keep the bike mounted to the vehicle, the frame support arms fold down to make it easier to store away when it's no longer needed. The bikes have been secured with the straps and buckles. I don't know how they would hold up in the sun and weather. The bike support arms fold down, as well as the lower joint. If you need to open the SUV rear door, this is the place to go. There is a Cons. I don't think this particular rack is terrible, but I think you can only design any hitch mount bike rack to do so much. I don't think this design will improve some of the cons I have listed. 1st. The bikes are close together. You have to manipulate pedals and handle bars as you stack the bikes together after the first one. You will need extra bungee cords to secure the spinning wheels and handlebars. Not because the bikes will come loose, but to prevent everything from hitting together and scratching all of your bikes up. The bottoms of the bikes swing back and forth if not bungee strapped. You will get scratches even if you mount things carefully because pedals and handle bars stick out. There is no way to avoid that. The pivot feature is useless when bikes are mounted. If you need to open a car on an SUV, the rack is too heavy to be lowered. Maybe its not supposed to be lowered with bikes mounted. I'm not sure if it would be heavy enough to clear an SUV door with bikes mounted to it. I have it on my truck. There is a The tension bolt isn't as quick to remove as a hitch lock. It is an aircraft style locking nut and you need 2 tools to loosen it. If someone wanted to take the time they could unbolt your rack and steal it. I tried mounting it with a hitch lock, but it allowed too much play in the bike rack to happen. The tension bolt will have to be replaced. The bike support arms can be mounted to the upright. I don't think it would be an issue with breaking if they had designed this area to be a bit more solid. There is a Those are the main points I've noticed. I could see some improvements, but I'm not sure how you could make this type of rack better. If it's right for you, read the review.
The material is made from 100% cotton canvas. The dimensions are 20 x 11 x 3 inches. The Rope Bag is built to make your day run more smoothly. Two main pockets have an internal zip pocket and two front pockets for cell phones, wallet, or other essentials. Throw it on for a hike or gear up for an awesome beach day with your KAVU Rope Bag. What makes their rope strong? So dope? Their rope straps are soft and not flimsy. They're the perfect combination of comfort and durability. They use some of the strongest, lightest clips out there, so you can really depend on them to last. Local feel, worldwide appeal, every season. The designers in Seattle create funky patterns and styles. They make gear that can make an adventure. KAVU's formula for working and living is to build fun into everything you do. They created adventure tested, true outdoor wear so you can express yourself and spread your good-time attitude.
👤This bag is for my purse. I will say that this bag holds more than you think by just looking at it. I was surprised that it wasn't as big as I thought it would be, since most reviewers use it as a diaper bag. I was able to carry a lot more in it than I could in a traditional purse or Meru sling bag. In the largest compartment, I carry my book, glass case, 8oz bottle of lotion, keys, phone, and sometimes a journal. On the other side, I have a small pencil bag for my personal care and first aid kit, travel tissues, and a bottle of stain removal on the go. In the bottom compartment on the front of the bag, I carry my purse, my phone, and two pens. In the top compartment, I have a bottle of hand sanitizer, ear buds, pocket knife, and lip balm. Don't let the size fool you. It is not uncomfortable on your shoulder. I don't think I can ever wear a cross body or hobo purse again. I have a lot of space left over. Everything is easy to find in the multiple compartments. I bought a second one because it is easy to clean and is water resistant. This bag can fit an 11” laptop and be zip up. You can see my 11”hp in my pics. It can't hold anything bigger.
👤My spears have already broken. If you bought the product from a different website such as Amazon, you can't contact KAVU if you want to return it. I need to have this bag repaired or I will take the loss. It's a shame that there isn't a warranty on a bag that is 888-282-0465 is 888-282-0465 I loved this bag but will never buy another one. I love the coral color. On hand wash mode, it washes up nicely. I can keep my stuff on one side and my stuff on the other side. I like the 2 front pockets for my phone and chapstick.
👤Don't be fooled by fakes! I was going to get a second Kavu bag. I could tell it was flimsy when I received it. The bag was missing key markings and the tag on the inside wasn't stitched correctly. The video on the Kavu website shows how to spot fakes if you get a bag that seems too lightweight or has defects. It was helpful to know that the bag I received was not authentic.
STABLE AND STURDAY. The camera umbrella is made of aluminum. Simple installation. Attaches to most deck railings with vertical balusters, but no tools. Sturdy and designed to hold your umbrella. The product will allow for more space on your deck. Strong is manufactured with powder coated steel. The distance between the Vertical Balusters must be greater than 2 inches and less than 7 inches apart. Not included: UMBRELLA. The umbrellas that the unit fits are larger than 1 1/4" and less than 1 7/8".
👤I bought the balcony umbrella holders to provide shade and more room on my deck. This will prevent people from tripping over the heavy umbrella stands. I was surprised to see that they had rubber covers for the claps. This prevents my railing from getting damaged. It has an opening at the bottom of the umbrella holder for the rain water to drain out. This product is worth it, but not cheap. I highly recommend it. It's sturdy and well made. This product is very well designed and thought out. Thanks for the great product.
👤I love the umbrella holder. As the sun moved across the deck, I bought 2 to move the umbrella. The rubber on the plates is high quality and helps make it more secure without damaging the railing. The 7.5 x 4 foot umbrella can be held with no problem. It saves a lot of space on the deck. There is a The reason I don't give it 5 stars is that the inside of the umbrella holder tube is not coated and is starting to rust from the rain, which is the reason I don't give it 5 stars. I expected it to cost half of what they are charging, as the inside tube is rusting.
👤I spent weeks trying to find something similar, that was less expensive, online, and walked the aisles of big box stores trying to find a way to replicate it. I have a small deck off my back door that is enough for 2 chairs and a flower pot, but I didn't want a bulky umbrella stand taking up space. It is in the middle of the day in the shade. I was worried that this would be a cheap and flimsy apparatus. They were getting the price because they were the only company that could make it. After a couple of months, I bought it because I wanted to use it. It is a large piece of equipment. Heavy. It appears to be very durable. It is easy to install and it is not going anywhere. I haven't had it for a long time, but it has not slipped, chipped, and the grip provided, that can tighten against your umbrella, to hold it in place, is very good. You spend money on something and find it isn't worth it. This was a good investment. If this doesn't last long, I would be surprised. Everyone who has seen it has commented on how great it is, how nice it looks, and how durable it is.
The SOONGO bike speedometer is waterproof and widely used, it works great on rainy days. It is not compatible with some solid wheel bicycles. If the product is different from what you thought, they are prepared to provide you with quality service. ENSURE SAFETY- The high-powered light of the Xinji bike light produces 800 lumens with 4 unique brightness levels, and two yellow, making it perfect for urban cycling, road riding or dangerous mountain biking. The bike speedometer for wheels can record average speed, maximum speed, current speed mph/kph, riding time, odometer, single trip distance and more. A sensitive sensor can track cycling speed. The display is bright to easily view statistics. A tail light and a headlight make your bike stand out with a wide angle view and up to 50 meters in distance. Instantly improve your visibility and safety with their bike light. You don't need a power source or a computer to charge the bike light and bicycle speedometer, it's just a power source and ausb cord. More than a bike speedometer for night riding, the Xinji bike speedometer is a wide application. The bike light set can be used as an emergency flashlight and can be used for any outdoor activity. There is an alarm bell with 6 sounds and a 120 decibel loudspeaker. The bike taillight can be operated with 3 modes--fast flash, slow flash and constant brightness.
👤I enjoy riding a bike outdoors. I want to know who I am riding, aslo needs a loud bell and I don't have a flashlight. I bought a bike light set with a bicycle speedometer and think it is a computer. You might need something. It is waterproof. It has a lot of features. You just need one click. You are changing from bright light to weak, white and yellow lights. You can choose which mode you want to record: total traffic mileage, average speed, single lane mileage, riding time and maximum speed. There is a You can change from mpH to kmH. There is a And you know that is all? It's a good thing. We have a safety taillight with red light modes, and it is very important for me to be able to hear the voice of it at night. You can choose it. It is really high volume. There are bell rings as well. The process of instalation is very easy. The soeedometer will measure the speed after you fix the sensor and magnet on the wheel. There is a If you love this type of sport, you should have it because you can measure your daily progress with it and feel the motivation. You need it for safety and comfort.
👤If you use it in miles/h measurement, I want you to learn how to setup it. METRIC has a default setup. You should be careful when changing it to miles. /h. You'll see this cm, not inch. If you want to calculate your tire's circumference, you can measure it or use the display. Push the minus sign and it will increase the numbers until 305. There is a You will get accurate distance and speed if you set it this way. There is a The biggest value in this product is that a person named Luis is behind it, and you can ask him any questions you want, he'll answer them for you. There is a It's not too late. I paid for my device. I have no connection with this company.
👤The front light of the bike has a digital clock that is easy to install on the front wheel and has a command to place on the steering wheel with alarm and different tones until voice alert. I love it because it has so many functions and it also brings a back light.
👤I was excited to find all of these operations and features in one device, but not as much after trying to use it. It was very difficult to read the instructions on one side of the paper. I needed a magnifying glass. The three pictures that show the set up of sensors on tires are hard to read. Installation instructions were really bad. The bike was upside down and the numbers were jumping as high as 24 mph down to 1 mph all while the wheel was spinning. Never consistent. I will try again tomorrow after trying for two days. The other features seem to work, but are they really accurate if the speedometer doesn't work? I must have received a different light because my flashlight was dim and had a bright circle in the middle. I didn't feel safe using it to light the path in front of me, even though it may illuminate a reflective sign afar off. The light moved too much on the handle bars. There is a They mean shrill alarm when they say horn. It was a mistake to test everything out inside the house. I'm not sure if having a car alarm going off will help drivers notice me on a bike and not hit me. I would like to return it. I have invested so much time trying to figure this out that I can't give up yet and have to start over. I don't want to have to speak to someone from the company to understand what's going on. Instructions should be understandable.
Will fit umbrellas with a 1 1/2-Inch handle. It can be used with many more speedlites, but it is not compatible with Sony and Minolta flash. The umbrella and flash light can be positioned in different angles with the help of the flash mounts. A tripod or light stand can be attached to with the help of the 1/4" SOCKET AND 3/8" METAL HOTSHOE1/4" sockets and the 3/8" metal hotshoe foot on the bottom. There is a hole in this item that you can use to align the lighting umbrella with the flash. STABLE AND STURDAY. The camera umbrella is made of aluminum.
👤There is an update on 5/2/2019. These are not good. Cheap isn't the word for them. I tried using them, but the screw that secures the flash in the hot shoe holder was loosened. The hot only main flash doesn't fit. The space to slide the hot shoe of the flash into the brackets is too narrow and the screw isn't long enough. I should've known better. The buyer should beware. I wouldn't recommend this product to someone I was trying to put out of business. The original review was original. I decided not to spend a lot of money on the Light Stand flash brackets because I needed them for a project. I don't think they will last long for small speedlights. They are not very good. The Threaded Spigot Stud was the reason for me buying them, but they won't take it. I was hoping to remove the cold shoe and drop in a Threaded Spigot Stud in order to use them with my AD200's, but when you remove the cold shoe there is a painted threaded stud screwed into the frame and I am certain that this is where the failure will occur I don't think they will hold up very well, so I won't use them with my AD200's. I'd buy a better mount if they were good for small speedlights. I would love to get my money back.
👤I like the flash mounts. They are used on my light stands for umbrellas and soft box lights. They gave me anadapter in case my light stand didn't fit the mounts. My stands work perfectly without the adapters, but it looks like they could be fastened to a tripod with a threaded barrel. There are two different thread sizes for the stand/tripod connections. The mounts are very sturdy and seem to be made of metal. If you want to use a flash in your umbrella lights, you have to have these. They use a screw that requires a screwdriver in two places, which would be a complaint. They used a plastic knob in two other joints. I wish they had used plastic knobs instead of half and half. I will try to find plastic knobs for the two places they didn't use them. Overall... I'm happy with the mounts.
👤I am very disappointed in this product. My first chance to use them will be past my return window. The screw that holds the flash is junk. The Canon flash dropped on the first adjustment to my lightstand. The stand was so tight that I had to use a plastic tool to remove the stupid thing from it. The most important part is not causing the flash to come crashing to the ground. I tried to make it usable, but I couldn't. I don't think I will be able to trust it. I wasted 15.
Proper use and caution are required when using the spring-loaded clamps. Don't put hot liquids in the cup. They have a three year warranty and you can email them for help. The umbrella holder is high quality and is suitable for most golf push carts. The internal width can be adjusted by knob to fit for 1.5 inch max diameter umbrellas. The angle can be adjusted to move the umbrella left or right. The double bolt knob is fixed with 3 different sizes inserts and fits on the 0.85-1.45 inch oval frames. It's very easy to disassemble the cart frame when you don't use it. It can be used on a stroller, wheelchair, or both. Before ordering, please confirm the size of the brackets you need.
👤I couldn't make this fit in my cart. There is a The piece that is supposed to hold the umbrella is not strong enough. A little wind and my umbrella flew out and the plastic piece popped out. I tried to make it work by closing my umbrella every time I step away and keeping a hand on it while I walk, but after about a week, the entire base is cracked and now useless. I found another broken one on the golf course. Not a good sign.
👤The umbrella is in this holder. The umbrella holder seems flimsy. When there is a little wind, the rubber mount still moves from the leverage of the umbrella. It feels like it is going to break off at any time. I wouldn't buy this again.
👤It held a big umbrella above me and my disc golf cart. It's a two person job. It took me 15 minutes to attach it and tighten it on with my pocket knife screwdriver. It's kind of a pain to spend the wing nut and hold the bolt from turning with the screwdriver while also pressing down the clamp so that the other side doesn't get warped. I'm not sure I'd want to use it.
👤I have been looking for a replacement for the original holder. It seemed like a good idea. It works well even though the original was supposed to screw onto it. I will leave it screwed in so as not to risk losing it again, even though it is a bt larger than the original.
👤It is very difficult to install without tools. It was difficult for my bag boy to find a specific spot where the appropriate cushions fit, because clunky and does not stay in place unless you can find a specific spot where the appropriate cushions fit just right. It was too late to return when I used it.
👤It was hard to find a spot for this. It is difficult to get tight enough that it does not move. It is flimsy and moves a lot, especially in fast, bumpy, or windy conditions. I use it when I get caught in the rain. I wanted to use it all the time so I could use my umbrella for sun protection. Unless I absolutely need it, it is more trouble than it is worth.
👤They supplied 3 different things. The holder was not tight enough to hold my umbrella. It might work for smaller umbrellas. It is advertised to be used on a golf push cart. It would support a gold umbrella.
Bicycle umbrella mount products from Yobee. In this article about bicycle umbrella mount you can see why people choose the product. Camco and Pro Bike Tool are also good brands to look for when you are finding bicycle umbrella mount.
Yobee, Camco and Pro Bike Tool are some of the best brands that chosen by people for bicycle umbrella mount. Find the detail in this article. Magideal, Kbrotech and Allen Sports are also brands that their products are worth to check.