It is easy to transport for easy protection. The Versa-Brella folds into a carrying case, so it can be taken anywhere. The size is 44 x 44 inches when opened. The portable Caddy has a holder for two fishing poles, drinks, cups, bottles, gear and more. No tools are required, as the Clamps are instantly available to both round and flat vertical surfaces. Adding rib reinforcements doubled the durability of the updated version. The bottom end caps have been improved. The strong and sturdy STAINLESS steel springs and hardware for rust prevention are included in the powerful two rubberized clamps. The design was made with UV inhibitor for longevity against the elements. To open the RoboCup, hold it up to your chest with the clamps facing away from you. Use both hands to squeeze the top cups and use both clamps to fit the cups onto the surface. The caps on the fishing poles are not the same as the bottom caps. Proper use and caution are required when using the spring-loaded clamps. Don't put hot liquids in the cup. They have a three year warranty and you can email them for help.
👤I use it as a holder for gravity fed meals. Have a feeding tube. The hole at the bottom of the cup makes it possible for tubing to come down through it. If you want to learn more about how it works for me, I posted about it on my website. I use extension sets because I have a low profile button type. If you have a dangler type g-tube, it wouldn't be that helpful. There is a The cup holder is made from high quality materials. No worries about it sliding down. I use the ROBOCUP to hold my meals. You can find these bottles on Amazon. You will need to get the "precision dispensers tip" as well as the basic bottle. The vendor that sells this cap on Amazon was charging way too much. It's better to get the tip somewhere else. I use the bottles because they are open on both ends, so air can get into the bottle and meals can flow out. There was no need to pour into a needle. There is a post on Tube Chic about the FIFO. There is a short video showing it in action. Once the bottle is inverted for a meal, you can either loosen the end or get the vented cap for that end of the bottle. I bought the vented caps directly from FIFO and I don't think they're on Amazon. The ROBOBCUP and FIFO bottle are the best combinations for gravity fed meals.
👤These things are great. I bought one to fit my Millenium Marine rod holders. The slots make it easy to put things on the side. I clean the bow of my boat. There are so many options. They will tighten the round stock tightly. It could be up to 2 inches. It holds up well on my seat post. I just got 2 more of these and they are so useful. I drilled 2 small holes in the cap to allow water to drain. I like taking good products and making them work better for me. When you pick it up, you might ask yourself, "Why didn't I think of that?" These would be perfect gifts for any guy. There is also a pink one for the ladies. My wife wants one of those.
👤This is a well engineered item. The spring is high quality. There is a It was designed 5 years ago. It needs to be bigger. The picture shows a double insulated cup. This is a common beach cup. To get the yeti to sit down that far, you have to push it hard. It would be perfect if it was 1/2” wider. It is holding the yeti with a snow cone. You get the same mediocre with a 20 ounce yeti. The yeti can koozie won't fit in the holder because it isn't at the bottom. Will it work? Yes. Will it work out? No. Hopefully version 2.0 will account for that. If it does it is a slam dunk. It is a three star until then.
Have your drinks close by. The stroller drink holder is designed to make it easier to put your drink on when you take your baby to the park or ride your bike. You can grab your drink when you need it. It prevents spills. It's a good idea to hold your cup or bottle in place so it doesn't fall off. It's for most cup, mug or water bottle sizes. The rotation is 360-Degrees. The drink holder can be adjusted on any angle. It is compatible with most strollers and can also be used on wheelchairs, trolleys, bikes or walkers. It's easy to mount. You can install it without the need for tools or equipment, and it can be mounted on the side bars of a stroller or under the seat. It can be adjusted to lock on rods, pipes or tubes. 100% satisfaction guaranteed. The quality of the stroller drink holders is very high. Let them know if you experience any quality issues and they will make it right. 100% satisfaction guaranteed. The quality of the stroller drink holders is very high. Let them know if you experience any quality issues and they will make it right.
👤My dad needed a place to store his bottled waters and he used a Drive Walker Roller. These are easy to install and have a metal screw. The plastic construction is very good. They are easy to install. The holder will twist. The cost for this item is very reasonable if you get 2 in the package. I would purchase again. The items were packaged in their own boxes and the box arrived undamaged and on time. I was pleased with the reviews I read and purchased from them.
👤The cup holders are great. You get 2 cup holders. They fit perfectly in my daughter's wheelchair. They hold her container and pop can. It holds my coffee mug. Absolutely perfect!
👤I bought this holder to replace the one that was on my push golf cart and am very pleased with its function and strength. There is a It seems to be stable when in use, even going up and down grassy hills. I tried to fit several containers together. It can hold a can, bottle, soda cup, and coffee thermal mug. The cup holder is small at first, but it expands as the cups get bigger. I have used this for a few rounds of golf and am very pleased. You could easily go on a bike. Enjoy!
👤I'm going back to Amazon because I can't believe they sell these. Since they're made of flimsy plastic, it's impossible to slip your cup or bottle back into the holder once you take it out. It's impossible to get the bottle back into the cup holder while riding a bike. Patrick Star, who designed this thing? It makes no sense.
👤The attachment broke and I bought this for my stroller. Pro- Sometimes it works. The attachment doesn't connect to the handle in a way that makes it straight and upright. There is a The cup holder tilts when the stroller is moving. It does not hold a venti cup. It is so tight that it slowly squeezes the cup out.
👤The item was perfect for the transport chair and bed rail. It's very versatile because it can be used on a horizontal bar or vertical bar. She would spill her water in the bed. She can reach the straw without removing the cup because it stays in place and she can see it.
👤Very disappointed. I thought they were great because they were light and easy to install. I haven't received my baby stroller yet. I did not bother testing it on something else. There is a The handle part that is attached to the stroller is heavier than the plastic holder, so it just goes on awkward. There is a I was cautious with my new stroller because it wasn't tight enough. I tightened it until it stopped slipping and felt like I could add a water bottle. The one that was pre installed to the stroller looked pathetic, it was much smaller and wouldn't fit all bottles, and it was flimsy. I decided to remove it so I could return it. I was shocked to see that it damaged my brand new baby stroller that we haven't even used yet because the baby has yet to arrive! I was really disappointed because I had installed according to directions and with a lot of care and caution. I was confused because it said it was versatile. It didn't work for my stroller handle/pole size and the tightening screw grazed the stroller, causing it to be damaged even when it was barely loose. Returned the product and never bought it again.
59"L x 26"W x 24"H The protection factor is 50. The shade canopy umbrella, called the Versa-brella, has a protection factor of 50 to help keep skin safe from the harmful rays of the sun. A sturdy cover and a sturdy connector. The canopy cover is rugged and won't rip or tear, and a heavy-duty universal clamp connects to square and tubular surfaces to ensure a secure hold on golf bags, strollers, beach chairs, or even bleachers. The Versa-brella can be adjusted to any angle to block the sun. It is easy to transport for easy protection. The Versa-Brella folds into a carrying case, so it can be taken anywhere. The regular size is 40 x 42 inches. Have no fear. Staying committed to your team, family, and friends, while keeping your skin protected against the sun, is possible with the Versa-Brella.
👤I bought this three years ago for fishing. I never used it until this year at the swim club. It's light and thin when packed, making it portable, and it can be mounted on almost anything. It has plastic cover on each end of the umbrella shade so it won't hurt even if you get poked by accident, but I don't like it when packed. I noticed that the pole still wiggles even on a locked position, even if there is a way to fold in half. If it loosens over time, it may not stay in position. The bottom line was 4.5 out of 5 stars. I'm removing a half star because it wiggles a little on a lock position. I don't know if this will last the test of time or if I got one with a defect. There is a I highly recommend this umbrella for all of the things I have mentioned. This is a must-have for anyone who needs to get away from the sun in an open area. If the video and photos were useful, please click on the button below. Thank you!
👤Take a look at the umbrella shape. It is not round and will cover the legs while sitting in a wheelchair. Hardware moves easily between equipment. The umbrella's spine is strong and folds into the bag.
👤Nothing will surprise you with this umbrella, if you've read the other reviews. The points of adjustment work well, although some are stickier than others. There is a metal nut that can come out if you loosen the clamps almost all the way. The superglue fix is easy, but you have to do it before you lose the nut. Make sure you don't glue your piece of furniture into a static position. There is a The umbrella has made the beach more pleasant. I got it because I am pregnant and my skin is too sensitive to the sun's rays. I've taken this umbrella to the beach many times. If you move your chair, it will fit right to the back of it. I put it on my deck railing to shade me from the sun while my husband was grilling. If you're in one spot, it will cover it. The umbrella is not affected by the winds. You need to be aware of the wind direction so you don't create a sail out of your umbrella. It will catch in a breeze. The strongest beach winds caused the Sport-Brella to shift/ slide from its position. This thing isn't wind-proof so don't expect it to be. I think I will use this at the beach in the future since it will help me not get burnt after forgetting to apply sunscreen. I like that the clamp can be used to attach other chairs, a stroller, or a deck railing. I can only imagine how useful it will be if I'm taking my child somewhere with a stroller and some rain. Being able to protect yourself without taking up your hands is clutch. I am glad I made this purchase.
Excellent strength and resilience- plastic and steel. No need for training. There are bolts in the umbrella bar holder. You don't need a wrench to loosen or tighten the nuts. You could attach it in any location.
👤I love mine! I decided to get a mount because I was tired of holding an umbrella while sitting in my chair. Since I don't have the luxury of leaving my chair in one place, I have to set it up and take it down every time I use it. I don't have to use tools to install it each time. Even when the wind blew, the umbrella stayed put. I would like to tilt the head to make adjustments when needed. I tilt the whole thing and it works for me. I am very happy with my purchase. It was much cheaper than having to buy a new beach chair and then have to carry it around.
👤I loved this. I needed this for the wagon. The adjustment part won't work for me. It seems to be stuck. I simply move the umbrella and it works. I didn't give it 5 stars because of that.
👤I attach it to a walker and an umbrella. It provides a spot of shade in the sun. There is a The angle of the umbrella to the side can be adjusted. I use one on each handle to provide more shade. It works great for a wheelchair. There is a It will work for any kind of framework. It works well on the walker and wheelchair handles.
👤It was difficult to install. It needs to be put on or taken down. I choose this one when it is broken. It is easy to install. I don't worry about taking any toys. There is a I use it on my stroller to block the sun. It was perfect!
👤We liked the umbrella holder. It was used for Disneyland. It was easy to install and use to stay dry. It worked well despite being snug on our stroller.
👤I don't know what it is. It's not my bike. When the knob and screw fell off, it flew across the room like a spring unloosed! Down the furnace duct! How do I get it back? I never got around to trying the second step of fitting it to the umbrella.
👤It was a pain in the butt and didn't work how I wanted it to. The chair connection and the umbrella connection were not worth the hassle of trying to get the angle right for the soccer game. I think it will work for stroller protection, but not for shade on a camping chair.
No need for training. There are bolts in the umbrella bar holder. You don't need a wrench to loosen or tighten the nuts. You could attach it in any location. A large and strong clamp can be used to clip anywhere you want and can be used to attach to a lot of things. This is a good choice if you are looking for a replacement umbrella holder. It was quick and easy to set up. It's ideal for umbrellas, flags and fishing poles. You can tighten the screw to adjust the hole diameter. The maximum thickness is 2.4inch. Measure the thickness of the object before you buy it. It was designed to offer shade. It's perfect for covering bbq grill, sporting events, outside work and other recreation. You can adjust the height of the umbrella with the help of a tube with a thumbscrew. Not included is the umbrella. It is important. Before placing an order, please check the diameter of your umbrella and deck or rail. Only fit pole diameter up to 1.5 and deck railings thickness less than 2.3". Thank you!
👤I needed this to hold an umbrella. The job was not done well. The umbrella fell over, causing the holding screw to bend. It won't hold a patio umbrella. I think it would hold a small umbrella. Their return policy should be added to this. I was charged for return shipping. The fine print in the policy is something buyers should beware of. I've never been charged to return an item on Amazon. I would not deal with this company again.
👤I was hoping that some of the reviews were incorrect. This does not stand up in a breeze. Within 5 minutes the umbrella was almost horizontal with my deck and the top section of the clamp was completely bent upwards. Does not hold up.
👤The umbrella stand is not worth much. The metal is soft. I tried to use an umbrella on my pool. The first wind picked up the umbrella and this stand and ended up in the pool, despite the fact that I tightened it enough. The umbrella broke. The umbrella stand is not functional. I have spent the worst $20 on. It didn't make it through one use. I am glad I didn't buy 2. I will try to send back, but it may be too late.
👤The umbrella is being held by this umbrella clamp. I tried it with our beach umbrella on the outdoor table and it fell over every time there was a breeze. I might try it with a golf umbrella, but it's not strong enough for a beach umbrella.
👤There was a breeze and the thing fell off the balcony. The bottom of the umbrella needs to be held up by something, otherwise it will slip out and the clamp won't hold up. It's boring.
👤You get what you pay for. I was shopping for an umbrella holder and I said no to one that was 100$ plus. This is what you get when you go cheap. The top plate is not straight. Unless you're looking for an umbrella to stand on your deck, you should keep searching and spend the extra money on a good one.
👤It doesn't look like it's clumsy in the picture. It took a bit to figure out how to put this in my cart. The quality is there, but at least the best way to attach it is not yet figured out. I recommend it even though it is clumsy. It is strong.
The plastic inserts on the base allow for a 1 1/2 pole. The plastic inserts will not hold the pole. The first ship was by ground.
👤These do work. They are heavy enough to keep an umbrella in place. The seller makes customers believe that it looks like something else. In the photo, the decorative part is not solid and the product is just one piece from a mold. I don't think it looks bad, but I don't like sellers doing this kind of thing and counting on customers not wanting to deal with the return process when they don't get what they expected. Here is what they looked like when I ordered them.
👤The stand was broken after a day and a half of use. I was surprised.
👤I bought this to hold an umbrella. It is not heavy enough to hold a patio umbrella. I closed the umbrella and the wind was small. The umbrella came out of the base and hit my car causing a lot of damage. I am not sure if this thing is allowed to be sold on Amazon. It is a joke.
👤This is a nice looking stand. It was easy to put together and I liked the fact that it had multiple attachment to accommodate different sized umbrellas. It is very unstable. I have a standard sized umbrella that tips over several times a day, both opened and closed, sometimes even when there is no wind at all. I held onto it, hoping we could adjust the bolts to make it more stable, but nothing has worked. I would return it if I were past my return window.
👤The manufacturing company does not have a quality control department. Garbage.
👤Light weight. I don't think you should get this. If you live in a place where there is never a wind, you should use an umbrella that weighs only a pound or two. I would buy a better quality one if I had to. This one is not worth much. My umbrella is on the ground.
👤The rating isn't a reflection of the material or looks of the product. There needs to be some compatibility with this base and the umbrellas Amazon sells. There is a The umbrella that I bought on the same order does not fit in this base. Which was the recommended product when I purchased the umbrella... How is that possible?
👤I think that advertising is misleading. I've had three of them. They've stayed in the North Florida area. The base itself seems to be rust-proof, but the tube that umbrella slides into has rusted at the base of all three of mine, leaving rust marks on the pool deck. Would not purchase again.
Proper use and caution are required when using the spring-loaded clamps. Don't put hot liquids in the cup. They have a three year warranty and you can email them for help. The umbrella holder is high quality and is suitable for most golf push carts. The internal width can be adjusted by knob to fit for 1.5 inch max diameter umbrellas. The angle can be adjusted to move the umbrella left or right. The double bolt knob is fixed with 3 different sizes inserts and fits on the 0.85-1.45 inch oval frames. It's very easy to disassemble the cart frame when you don't use it. It can be used on a stroller, wheelchair, or both. Before ordering, please confirm the size of the brackets you need.
👤I couldn't make this fit in my cart. There is a The piece that is supposed to hold the umbrella is not strong enough. A little wind and my umbrella flew out and the plastic piece popped out. I tried to make it work by closing my umbrella every time I step away and keeping a hand on it while I walk, but after about a week, the entire base is cracked and now useless. I found another broken one on the golf course. Not a good sign.
👤The umbrella is in this holder. The umbrella holder seems flimsy. When there is a little wind, the rubber mount still moves from the leverage of the umbrella. It feels like it is going to break off at any time. I wouldn't buy this again.
👤It held a big umbrella above me and my disc golf cart. It's a two person job. It took me 15 minutes to attach it and tighten it on with my pocket knife screwdriver. It's kind of a pain to spend the wing nut and hold the bolt from turning with the screwdriver while also pressing down the clamp so that the other side doesn't get warped. I'm not sure I'd want to use it.
👤I have been looking for a replacement for the original holder. It seemed like a good idea. It works well even though the original was supposed to screw onto it. I will leave it screwed in so as not to risk losing it again, even though it is a bt larger than the original.
👤It is very difficult to install without tools. It was difficult for my bag boy to find a specific spot where the appropriate cushions fit, because clunky and does not stay in place unless you can find a specific spot where the appropriate cushions fit just right. It was too late to return when I used it.
👤It was hard to find a spot for this. It is difficult to get tight enough that it does not move. It is flimsy and moves a lot, especially in fast, bumpy, or windy conditions. I use it when I get caught in the rain. I wanted to use it all the time so I could use my umbrella for sun protection. Unless I absolutely need it, it is more trouble than it is worth.
👤They supplied 3 different things. The holder was not tight enough to hold my umbrella. It might work for smaller umbrellas. It is advertised to be used on a golf push cart. It would support a gold umbrella.
The bottle holder is easy to use and made of eco-friendly material. Simply hold the knob to the handlebars and close the clamps with your hand. It's compatible with most brand strollers people know, like Nuna, Pockit, etc. A large phone holder can fit most phones in this cup holder. The stroller cup holder is made from recycled material. The holder is designed with Silicone rubber to make sure that it is secure while you get your hands free. It is easy to use, simply clip the adjustability to the handlebars and affix it with your hand. The holder can be moved around. You can adjust it according to your needs. The bottle holder can be assembled on different bars. The bottle holder is designed to keep cups stable and prevent spills. The cup holder can hold bottles with handles. The stroller cup holder is compatible with major stroller brands such as Britax, BabyJoy, and Maclaren. Multifunctional cup holder can be used on a variety of objects. You need to keep your beverages stable. Multifunctional cup holder can be used on a variety of objects. You need to keep your beverages stable.
👤I wasn't expecting much for this or any cupholder. I was surprised by this one. There is a The thing is firmly attached. The thing will not fall. There is a The cup holder part has flaps that keep the cylinder in place. I had other cup holders that were loose and banged the sides all the time. The bottle would fall on the child. Not with this one. I tried it with a large bottle, a small bottle and a plastic cup and all were tucked in. There is a The cell phone holder is good. It is thin, which is a good thing. The phone falls out when others are too wide. After a long ride, my phone stayed put. I was very happy with the purchase.
👤The material used for this cup and phone holder is very thick. I have an Apple product and it held up. My daughter has an Apple device with a pop on the back and a thicker case that fits nicely. I tried 2 different drink containers and they fit nicely. I attached it to the mini trampoline and it held up very well. I would like to use it on a stroller, but my grandsons aren't as frequent. I wanted it to be multi purpose and this worked out great. The mechanism that hooks to the rod opens and closes to fit a variety of cylinders. It is nice to have a sturdy holder. Not flimsy at all. The blue is attractive. It is easy to take off and wash. It was in place with a full container of water. I attached it to my fence because we do a lot of gardening. I could have access to my phone without my knowledge. I tried it on our lawn furniture chair and it held the handle securely. Will be able to use in many places.
👤The product has come in handy more than I anticipated. I was surprised to see how useful it is. I don't have to use my hands for drinks or find my phone when I load my kids into the car because of this product. I didn't realize I needed the convenience. The drink holder is very sturdy because of the flexible holders on the inside, it really holds any drink and is very stable, I was impressed. The phone holder is very secure for my phone and my husband's phone, I have a popsocket on the back of my phone, and the phones are both held securely. I was sure the cup holder would pop off every time I put the stroller away, so this is especially useful when I'm on a walk and don't want to fiddle on the phone. It didn't! It's in place and doesn't stop you from folding and opening the stroller. It's easy to remove. It's rare that I tighten it onto the handle once in a while because it feels a little loose.
👤The drink and phone holder is very well made. I attached a photo of me holding my drink upside-down and still holding it, because the rubber flaps inside hold it so snug. The phone holder is a good size for a large phone, it holds my s10 plus perfectly, and could go a little bigger. If your cup is sweating, the slit cut in the bottom of the cup holder will allow it to drain. The arm is large and sturdy. It's easy to turn the handle. It is easy to clean. I am very happy with the cup and phone holder.
Not included: UMBRELLA. The umbrellas that the unit fits are larger than 1 1/4" and less than 1 7/8". There is no need to loosen the bolts in the umbrella bar holder. To loosen or tighten the small nuts, you don't need a wrench. You could attach it in any location. It is possible to adjust the height. The pole can be pulled through the height. The UMBRELLA CLIP is adjusted. The clip can be adjusted to fit your umbrella holder. The umbrella handle max dia is 0.67 inch. Make sure your handle is workable by checking it with your dia. There are multiple functions. It can be used on a deck chair. Excellent strength and resilience- plastic and steel.
👤I'm an 84 year old man and I take a walk with my rollator every day except when it's snowing. Light rain is not bad. I don't like to get soaked when it pours. I would need a third hand to hold an umbrella and this device acts as a third hand. Attaching the umbrella to the rollator is easy. I'm 5' 10 and there's a caveat. You need a standard umbrella. Unless you don't mind walking bent over, a folding umbrella is too short.
👤. There is a This umbrella mount holder is an essential item to hold umbrellas, it does not require tools to install. If you get caught in snow or rain after a nuclear critical incident. The "BAGAIL Golf Umbrella" model can be found on the Amazon pages. You will be able to manually transport those who God placed under your stewardship if you attach most "Deer Carts" with this holder. You should keep this item along with your Tyvek coveralls, gas mask, and Go Bag at work.
👤It doesn't fit my wheelchairs. There is not an extra joint in the directions. That is okay. It would have made the fit better. It was difficult to attach because directions did not have enough information, but also because it was a pain. The part that holds the umbrella is not very good. You have to make the umbrella tight to hold it up. I am very disappointed. My search for water in a wheelchair continues.
👤It seems to be strong. I use it on my stroller to block the sun. It's perfect! There is a It's work for my umbrella. The longer screws should be suitable for the wide handled umbrella. There is a I don't recommend this if you have a wide bar handle. My stroller's handle is small. The bar should not be working if it handles more than a couple of inches. There is a I like it, it works perfectly, it is very easy to attach or detach, I could use it anywhere.
👤The mount attachment works well on wheelchairs and strollers, but the umbrella gripper does not work well on umbrella sizes other than a purse or single person size. The attendant should be protected from the sun or shaded. Since the umbrella is still low, you will not be able to see well if you are tall. 3 stars because it stays attached to the chair or stroller well and is sturdy, but just wish it could be expanded to fit taller people and have a grip large enough to go around the metal base of a golf umbrella.
ChainBrite Chain and Component Cleaning fluid is plant-based and will not harm plastic, rubber or carbon fiber. Patented simple push in design is easy to use. You need to lift the bike and put it in the stand. When you push the bike into the rack, the front holder will tilt. Heavy bikes such as downhill, mountain and beach bikes will be perfect for this design. The most stable bike stand has three points on the tires, which is better than other stands which only have one or two points on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel stays in the holdder because it's deeper than others. The dynamic stand base makes it impossible to tilt the bike if you push hard. It is possible to fold the stand into a flat shape within a second with a simple one-pull-knife. Your bikes will not be lying on the ground anymore. The steel is heat treated and has a fantastic powder coated finish. If used correctly, this stand will last forever. All bikes are compatible. The bike stand will fit almost all bikes, but only those with the tires more than 2.4" in width. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.
👤After years of leaning my bike against the wall, some serious smudges had developed. I bought this to store my bicycle upright, but not against the wall. There is a It works, but not well. The rack is too light to support my bike with my panniers, and it doesn't have enough weight to stay in place as I attempt to roll my front wheel into the well. When I try to put my bike in it, the rack scoots away, and unless I'm very careful, it leans into the wall. There is a I recommend the procedure if you've purchased this. To orient the rack, drag it away from the wall. 2. Use your foot to tilt the mechanism. Roll your front wheel into the slot and secure the rack with your foot. 4. Lift the back of your bicycle and orient it straight behind so that it has the best chance of standing up. 5. If you have a weight on your bike, you should turn your front wheel and rack towards the weight so that you can form a triangle with the ground. There is a How to remove the bicycle from the rack? I haven't found a way to keep the rack in place. There is a It seems like the greatest improvement would be to weight the base of the rack so that it's more stable.
👤I was afraid that my road bike wouldn't be stable in this storage stand. There is nothing to worry about. It keeps the bike stable and holds the skinny tires. It was well designed. Excellent product.
👤I was tired of putting my expensive road bike up against the wall and hoping it wouldn't fall over, and also scratching up the walls and possibly the bike. I wanted to keep it standing up without having to lean it against a wall. I agreed after reading a post that said your expensive bike deserves a quality bike stand. I initially ordered a different stand. It was $5 cheaper than this one. The one that popped up on my screen had an extra component that they call the "push-in simple design and the wheel sits deeper." I ordered it from Bikehand after I saw that it had a lifetime warranty. The stand works well and the wheel slides in so the bike stays up. The bike has 700c x 23mm tires and works as advertised.
👤I bought a bike stand to help organize my garage and not have a bike leaning on it. My bike does not take a kickstand very well. I needed something to keep it upright. The rear section of my bike is very heavy and this stand balances it very well. The stand stays planted even if the bike is moved or worked on. The bike I have weighs a good deal. The stand was worth every penny if it could keep my bike up. It collapses when you don't use it.
👤The stands seem to be well made. The manufacturer has no fault in the fact that they tend to move when you push the bikes into them. You can use your foot to support them. The stands shift when the bikes are taken off the stand. I thought about it and did the following. I thought I could use the wall to keep the bikes from shifting. 1. I bought a plank of 8 feet. 2. I parked my car at the wheel parking stop. It's 6 feet long and is sold on Amazon. 3. The lumber was cut to 6 feet so that it would be the same length as the stop. 4. I bought a lot of deck screws. 5. I drilled small holes in the parking stands and then moved up to a bit to fit the deck screws. 6. I marked off the wood plank where the stands would be installed. 7. I made small holes so the screws wouldn't split the wood. There are 8. I took a battery powered driver and drilled them through the plank. Don't overtighten. The stands are secure. No shifting at all.
The bike bottle cage fit a 26oz water bottle. You can bend it to fit. The bottles are slightly smaller or larger than the bike water bottles. It can be used on all types of bicycles, from the racing bike to the baby carriage and wheelchair. Most bikes are universal. The bike water bottle holder is universal for most bikes. The bottle cage is compatible with most standard-sized water bottles. It can fit a bottle of 2.5'' - 3.3'' in diameter. The holder can be adjusted to the desired position. No tools or screws are needed for easy installation of the bottle cage. Mounts in seconds on the handlebars, under seat, down tube, fork, and front pipe. It is very durable, made of high-quality plastic, steel and metal parts. It's designed for keeping cups, cans and bottles.
👤It was easy to install. After searching, I found the most affordable option that would work for my nephew's needs, and it was a water bottle holder. There is a It took me less than a minute to put on his bike. It was very easy. It's the perfect size for a bottle of water or a small sports bottle. If you need a quick option for your bike, this is the option for you.
👤It's easy to install. It didn't need to be screwed on, it held the bar tight. If the bar is too thick it won't fit all bikes. It's not large enough for a refill bottle.
👤I put foam around the bar so it had a better grip, but the holder wouldn't stay put. I tightened it tightly. There is a returning item.
👤It's easy to attach and keep water bottles safe on bumpy rides.
👤She wanted a bike that was easy to use. The fit between the handlebars is not perfect.
👤The ability to adjust makes the rotating feature not hold in place firmly. I only got a disposable bottle of water because I couldn't fit a bigger bottle on my body.
👤It's not worth it, keep slipping even tighten until the end of the screw. Search for another product.
👤Sturdy, holds my water bottle. People with large water bottles are my only issue. It does not have a way to expand to the bottles fitting. If you have larger bottles, this might not be for you. I can't complain.
👤The bottle does not fit in the bike or in the bottle.
Bicycle umbrella holder products from Robocup. In this article about bicycle umbrella holder you can see why people choose the product. Bundlepro and Sport-brella are also good brands to look for when you are finding bicycle umbrella holder.
Robocup, Bundlepro and Sport-brella are some of the best brands that chosen by people for bicycle umbrella holder. Find the detail in this article. Yobee, Ammsun and D C America are also brands that their products are worth to check.