The package is 15 inches in width. The front wheel trainer block is designed to fit every bicycle on the market by offering 3 different heights to level your front wheel. There is a valley. The front wheel leveling riser block has a valley that allows maximum stability for a variety of wheel sizes. There are bed grips. Three waffle webbed grips are featured on the bottom of the front wheel block to ensure maximum security while throwing down mega watt on your indoor trainer. HEIGHT INDICATORS. On each side of the block there are arrows for the three height differences. It is hard to deny the benefits of indoor training. The goal was to build the most functional front wheel block to maximize your indoor training. They are proud to say that the KOM Cycling indoor trainer block is the best on the market, because of its 700c - 29er tires, three heights to fit every trainer, and a webbed grip bottom.
👤I take my indoor training very seriously since I moved to downtown Chicago and there were no places to ride. The wheel riser is the only one on the market that can do that. I have tried a lot of risers that are made of flimsy plastic, they slide around on the floor, or they just feel awkward to balance on, and they are the only risers I have tried. The rubber floor grips, secure feel, and weight of this riser give the front wheel a bonus. I can't think of a better option at the price point. This is the last riser you will ever want to buy.
👤I bought a trainer for my trike so I can ride it indoors during the winter. I bought the bike block/risers after feeling like I was riding in a downhill position. I needed 2 of them for my front tires. There is a It took a bit of trial and error to find the right product. The blocks did not fit my tires well. Some did not seem stable. I tried the blocks and they were very stable. They are a bit larger and wider, but having 2 heights is great. It's a bit expensive, but it's worth it when you need 2 of them. These blocks are worth the cost if you have a trainer for your bike.
👤Very strong. My trainer sits high and the block that came with it still had me at a "going downhill" angle, I had to put books under it to get the bike level, this allows me to get it perfect and no matter how hard I pedal and am rocking back and forth peddling it feels I've never felt like it was going to give up.
👤A block that moves is a nuisance. This block hugs the front tire and gives you a stable ride. It is wide enough that you can choose from several heights. If you are going to replace the phone book underneath your tire, you should definitely use this product.
👤If you are like me, you think about the workout schedule, kit, shoes and cleats, and the fact that you have to wear them. The trainer is the one you've been dreaming of. You forgot a block! This is a great addition to the pain cave. It is a great size, it holds multiple sized wheels with no problems, and it is three levels to get the perfect angle. Some blocks are too small and you don't want to deal with them, but this is a happy place. The little feet keep it where it is put. This is the block to get if you are going to be a trainer.
DURABLE & STURDY: The bicycle stand rack is made of aluminum. The corner has a coating on it to protect it from nicks and scratches. It's a simple molded plastic stand for a front wheel. The bike riser block raises the front tire just enough to keep you from sliding off your seat while pedaling. The internal design guarantees wheel stability. The anti-slip feet stay in place. It's suitable for 98% of the size of road and moutain bikes. The item can be found by searching for the serial number: "B089NVTC2V".
👤There is an update! The company had a great customer service. They solved my issue quickly. There is a The item is not as deep as the picture shows. It's a no-name like a fake item. The pictures I attached show that it is different from the description. The front wheel isn't standing.
👤I don't know what I was expecting. It's something I can't live without. I used to use my roommates cats to put the tire on top of it. This made sense to me.
👤You get what you pay for. I decided to save a few dollars by buying the item instead of the model I purchased. The tire space is too wide for my 700x25 tire because it's made to accommodate other sizes. There are different slots for different sized tires.
👤The price is good. The one I ordered took longer than I expected but is shipped quickly. This is a good deal if you don't hurry. My wife used a towel that was folded up as a temporary measure. There is a This seems to be tough enough to take the weight. We use in on a rough concrete basement floor. Unless you lean on the handlebars, it stays put. It can move a bit. Why would you do that? It has no skid pads.
👤The thing slides around as if it is not there. Does nothing to fix the front wheel.
👤It was as advertised. It works for my 700x25c wheel. Holds to the floor with just enough wiggle room for sprints at the top. Highly recommended.
The Bicycle Computer IGS10S can be used in rainy days. Track and capture real-time cycling speed and cadence on your bike computer or phone with compatible training apps. It is easy to install and lightweight. Attaching Speed to your bike's wheel hub is included. The RPM sensors are integrated with ANT+, and connect to a variety of devices. You can record workout data with the Wahoo Fitness app. Works with over 50 Smartphone apps.
👤I bought this to use with my app. I didn't know how much the Peloton app relied on. The sensor makes the workout. The Candence can be seen on the Peloton app screen if you connect the sensor directly from your workout. A lot of the reviews say you can't, but that's not true.
👤I bought both speed and cadence at the same time. Delivery was made late at night to my neighbors house. I retrieved after intercepting. The Star Trac NXT Spinner has a solid wheel. You can install onto a spin bike if you want, but you can't do it on a regular bike. It took less than a minute to install the two watches and display them in the app. I measured the wheel diameter with a soft tape measure and entered it in the "Custom" box when setting up the Speed sensor. I got on my spinner and started pedaling, the app showed that I was going 16 mph and was at 67rpm. I will try to update my iPad mini 4 with workout info. I was riding in Italy with a group of riders and I was able to get a 7 day trial of Zwift. If you can judge the real life feel of the resistance you apply to the spin wheel, it is realistic and can be used to play a game. I am very pleased with my setup.
👤It works great. I bought this to attach the arm of my bike to the app so I can follow along with my workouts. The sensor seems to work well. I was able to follow the suggestedrpm during my workout. Very happy with the purchase! This is the sensor for your bike. You can attach it with zip ties or with a sticky 3M piece. I used the sticky 3M during my workout.
👤It's referred to as the TLDR. If you want to use the external speed sensors directly with the Strava app, you should not purchase this combo, as they don't appear to have any intention of changing this. You can use the Wahoo app to track your ride and then have it uploaded to Strava, but this means you'd miss out on some of the premium features of Strava that you only get in-app. There is a I don't need the speed sensor since it is pointless to me since I use it exclusively with Strava, and the cadence sensor does what it's supposed to do.
👤For a few weeks now. I was able to put the Speed sensor on the left side of the bike using zip ties and double-side tape. I set the diameter and size of the wheel in the app. I'm just starting spinning and it's only up to about 15 mph. The pedal arm had a sensor on it. It's not a problem to get active on the phone. The blue light blinks when I spin the wheels and the app connects. Happy with the set up. Even though they don't recommend it, it's a good way to go. MyFitnessPal records it as walking very annoying if you pay for one of the premiums, so it's a little clunky connecting the data from the fitness app to the Wahoo App. If you want to follow along with training videos adjusting your speed and cadence, these senors will work for you. There is a photo added 5/14.
The material is known for its high levels of strength and resilience. The bike trainer skewer will last for a long time. It's perfect for Road and Mountain bikes in any weather or climate. The skewer for the rear wheel. It is designed for use with trainers. The materials used are the highest qaulity. Rear wheel road or mtb is compatible. The indoor trainer should be used. The warranty is for 1 year.
👤Immediately after installation, the Axle sheared. Having to use a QR which doesn't fit well again. I don't think it would happen again if a replacement product was available.
👤The bike is ok after an indoor trainer crash. I decided to get a skewer that was better for indoors. The Kickr snap holds this skewer in place. I have a branded titanium skewer that I use for outdoor use, but I am too lazy to swap them out for this one, because I live where it is flat. I'm very happy with the purchase and hope it doesn't crash during my next test. Ride on!
👤I have had a lot of skewers in the past, but never one this bad. The wheel came loose when I went for an outdoor ride over a bridge. After that, it started flipping open on its own. I am on here looking to buy another skewer because when I ride on the trainer it flips open. I bought this to replace an actual CycleOps skewer that came with a trainer that had worn out and never had any issues with it.
👤This fits the trainer. It didn't fit my style. Make sure this is a good fit for your bike and trainer. Trying to get out of this by going cheap. I bought the one that was specifically for my bike and it worked out great. Make sure you buy what you need. Not just the cheapest option.
👤The skewer on my American Classic Aero 420 wheel was replaced. The bike is rock solid now that the trainer has been increased in stability. If you are a weight watcher you should keep that in mind since the whole thing seems to be made out of steel and is longer than my old skewer.
👤It's a skewer with a longer rod. The inner skewer rod is bent at the threaded section because the cap doesn't fit the trainer properly. The end cap should be slightly tapered and checked to make sure it fully inserts into the trainer support. If you're a heavier rider or stand to pedal for interval training, the skewer rod will bend. I weighed 155 lbs and was able to bend the skewer. Until Cycleops provides a better skewer design for their trainers, save your money and buy any ordinary quick release skewer for half the price or less, because you'll probably still need to replace it fairly often.
Go for a natural cycling position and increased stability with the included multifunctional front wheel support, which also serves as a handle to carry the trainer. COMPATIBILITY: The wheel size is 26” or 700c, compatible with road bikes, hybrid and those MTBs. The tire width is from 23C road bike tires to 2.4” MTB tires. ANIT-SKID GRIP DESIGN: The rubber feet on the bottom of the front wheel block could be used to keep the bike in place while you ride. Stable and reliable are the benefits of the front wheel riser block. The design of the skid resistance could keep you safe and your bike stable. The front wheel riser block has three heights, so you can find the most comfortable position for riding. Heights are available in three sizes. You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan.
It is easy to install and widely compatible. The bicycle exercise stand is easy to assemble. Most road and mountain bikes with a tire width below 2.75 are compatible with a quick release skewer. Max. The bearing capacity is 300 lbs. SARIS NFINITY TECHNOLOGY recreates motion experienced outdoors. It's compatible with a variety of training configurations, and nearly every trainer is available. TRAILBLAZING: The MP1 Nfinity is a type of riding that has never been experienced indoors. Get adequate. You can put in miles by reducing the pressure on touch points. It's pure fun. A training experience that is responsive, immersive and authentic.
👤Even if it is overpriced, the platform is really nice. The trainer sessions are more comfortable in the saddle than without it. I have a big concern about the platform. The straps holding the trainer down are not industrial-grade. It feels weak and can easily be pulled apart. After receiving the platform asking if I could purchase additional straps to tie down my trainer, I opened a support ticket with Saris. We've been going on for 3 weeks now, and I haven't received a single acknowledgement of my request. I don't believe in Saris and if given the chance to start over, I would hold off on buying anything.
👤Details matter. The design was very good, but the thumb screws amd bolts weren't compatible. I would have expected something so sime to be right for 1200 bucks.
👤A must have for training indoors. It comes assembled. It is well made and can be delivered in 48 hours. I loved riding it today. It is very similar to e-rollers if you are familiar with them. I had no sore knees or feet after my ride. Don't think about it and buy it.
👤DCRainmaker and prior reviewers Negatives - price, some quality, really? 4 were loose and 2 were stripped. There were no T bolts for front rails and no coating on the bottom side of the rails. Is it $89 for assembly? There is no assembly. There is a Positives work well with the Kickr bike. The ride and axis work well. It was easy to setup. It reduces stress on the body. There is a The product was great. Improvements and a reduction in price are needed.
👤I called them for supper and they told me it wouldn't supper my bike. I removed the straps from the front wheel holder and it supports my bike.
👤The thing was very cheap, the straps barely hold down anything, and the motion isn't as fluid as it could be, which makes it hard to get out of your bike.
👤Adding the next level of motion to cycling is a must.
👤The company has been making products for many years. The fastening rails on the platform were not anodized. They have been used for six months and they are all very old. They didn't do anything after they submitted a ticket to Saris. The parts should have been made of aluminum. After only six months of use, no amount of sweat would have caused this oxidation. I don't recommend this product and would advise anyone interested in one of these to buy something else.
A wide base and low stance for unshakable balance is what stability on any surface is built with. 5 rubber feet that can be adjusted to even out any flooring. Spin In Silence: Smooth, seamless design and noise reduction resistance wheel mean you don't need to increase the volume when you build up the burn. If you use a road bike, the noise will be louder. Train to your standards with a bar-mounted remote and wide range resistance curve. Ready to head outside? You can easily release and remove your ride by hitting the press-down lever. Installation of the front wheel riser block and rear quick release lever can be done quickly. The stand is great for road and mountain bikes with a 26-28" or 700c wheel.
👤This thing has been very difficult. It's loud and shakes the walls in the room I have it set up in. I'm sure there are better options out there, but it's too loud to use as intended. I've tried to make it work for months and it's a huge disappointment that the time has passed. The company saw the review and sent me a new one. The replacement is in good working order. Customer support is great. Buy with confidence.
👤The setup for this bike stand is easy, it is pre-assembled and ready to go, the entire setup to attach the bike took only a few minutes. The unit works as advertised, the quality was better than I expected, and setting up was easy. This unit is easy to set up and affordable for those who want to ride but can't during winter. Resistance can be adjusted with a switch mounted on the handlebars and by going through the bike's gears. To remove the bike, you need to remove the handlebar switch, then move the red handle to release the rear of the bike. I would recommend this unit to others.
👤My wife and I love the trainer, it's easy to setup, it's a good price, and it's a great accessory for the #Suffes Fest App in the IOS. Can not go wrong with this, used along with an app or alone, will do the work, Lets see it in a year after of 4 - 5 hours weekly use.
👤This is a good purchase. I swapped out the dh specific tire for a road tire to reduce the noise and not chew up the tread on a maxxis minion tire, it fits a downhill bike just fine. The setup is excellent and should be used for pre and post surgery.
👤I bought another trainer and couldn't figure out how to set it up. It looked like it wasn't compatible with my bike. I gave up on bike trainers after running out of patience. I find this product. I read reviews that said "set up in 5 minutes" and other good things. If it takes 5, it will take me 20. I thought it was connected with magnets. Silly me. At this point, I don't know what part are magnets. I had trouble hooking up my bike because the directions were not clear for someone who needs everything spelled out clearly. The images were small and not showing what I needed to see. I finally figured it out! I had to replace my release bar for the rear tire with theirs, which they have in the box for you, and it worked. The quick release is so cool. I use my iMac in my front of my bike to watch training videos or scenic routes while I work out. Why do people buy the Peloton when it is just as good for a fraction of the price? I have a phone. I can watch the videos on my iMac, if I use the right software. I would have gone the route of air displaying my bike from phone to Apple TV if the TV was in another room that I didn't want my bike in. This will help you, so the 8 of you in the world. I don't think so. The resistance thing on my handle works well. It doesn't fit on my handle, so I put it around my front gear wire and it stays-ish. I think her knob was installed upside down, because a reviewer said hers was working in the opposite direction. It works great, but mine was just fine. It took me 20 minutes. I love it! I wish I hadn't given up on trainers the first time around, and just got this one after the first one didn't work out. I have an exercise outlet during the winter. No gaining 15 lbs over the holiday. It was quite obvious.
Magnetic magnets have resistance of 32 Neodymium magnets. ANT+ is a wireless technology. The operating system isiOS, macOS, Windows. There is a front wheel block, power cable, quick-release skewer, thru-axle skewer, and axle adapters for 130mm, 135mm, and 142mm.
👤This trainer has a perfect link to it. I have had no issues with reviewers. The road feel is interesting. It felt weird to drive over the planks for the first time, but now I can not imagine not having it. I think I am getting better at sprints and climbs after a month of use, despite the wobble when you get out of the saddle. I don't regret the cost or my choice. I am enjoying working with the trainer. My family likes how quiet it is.
👤Product is outstanding. It was built for the professional cyclist. More powerful than I need. I wanted the other features of this model. The package was opened. The parts bag and instruction bag had been opened. The unit seems to function, but the item was listed as "new" and it was obvious that it wasn't. This should have been listed on the site. I plan to keep the item and will take my chances that this was not a demo unit, but I am disappointed with the seller and will update review if they contact me for a solution.
👤It's an awesome trainer once it's set up correctly. The instructions from TACX were not clear on how to install the tightening cap on a new cassette. If the smaller gears are not tight, you need a new one. There are also videos on the internet. When I first attached my road bike, it was very loud. I had to adjust my rear derailleur because I was able to correct this. I switched to my tri-bike after my road bike wouldn't shift properly and I had to make a few adjustments. I need a new cable for my toad bike. I have ridden every day since using this trainer. I can use a heart rate monitor with my AppleTV to get all the functions, because it connects instantly. I have noticed a huge increase in strength and performance in the last 3 weeks.
👤The trainer is great but the support after purchase could be better. I have been using it for about four months. It has a good design and provides a good sense of the road. You will feel the hills, roads, and even a nice simulation on downhill segments when connected to a training application. It is very stable and I am very comfortable when standing on the pedals. The lack of support getting the thing up and running annoyed me. Most of my tools are not metric and I am not a bike mechanic. The machine does not come with a cassette. You will have to order the specialized tools and figure out which one to purchase. I watched a lot of videos and finally got it on, but I had a lot of profanity. There is the axle setup. My trainer is shipped with a quick release set up, and I have a solidthru axle on my Trek Domane. The Tacx Neo 2T comes with a bunch of adapters that support a conversion. There is no explanation as to how it all goes together or what it should look like when you are done. I had to swap out parts to fit my bike and make sure I didn't damage the disc brakes. You will need a 17mm wrench to tighten the connections. The profanity was bad with the cassette install and I was off the chain. It is a great trainer. I enjoy my winter riding indoors. You might want to befriend a bike mechanic on Facebook.
There are two things that are not provided, the first is the USB hole on the basis and the second is the fact that it is only for do-it-yourself purposes. There are two The tension screw should not be adjusted without the monitor on it. There will be noise when working with rough tires. Quite when working with road bike tires. rubber feet prevent scratching wood floor, works on any surface. A wide base and low stance for unshakable balance was built. The max load is 330 lbs. It is easy to install and release. The quick release is used to tightly hold the rear wheel. It's easier to take the bike down than other bike trainers. Magnetic resistances meet your needs for resistance and speed, and the handle bar mounted resistance controller lets you adjust resistance. The trainer stand is compatible with any road or mountain bike with a 26-28" or 700C wheel.
👤I was concerned after reading a few of the reviews. There were a number of 1 star with similar complaints. It is getting too dark for me to feel safe on my bike. So. This. The easy mount is easy to assemble. I was worried that the fault had happened to me because first use could not get enough resistance. Nope. I thought what might have happened to others. If the bolt that pushes the roller against the wheel doesn't seat correctly, you can tighten it, but it won't improve contact between tire and roller. You can see the pressure on the tire by seating it correctly. An hour on level 3 feels like a 14 mile ride. I can sprint but not sustain it. I don't want a permanent mount so the cable for the resistance adjustment is annoying. If mounted correctly, it stays out of the pedal sweep. After about 100 miles, all in a great purchase.
👤I'm over 200 lbs and almost 50 years old and have arthritis in my knees and back. I need something to help me get some exercise, but not so much that I have to spend a lot of money. Even if it takes a bit of time and double checking, I'm great with putting together Ikea stuff. You can look forward to the assembly of this item. All pictures are meaningless. Don't be afraid, replace your tire rod, it will work. The front wheel chock is very strong. This will raise your bike by 2 inches. If you have some knowledge of interpreting image to ease reality to use, it's easy to put together, but I need a foot stool to get up the 2 extra inches.
👤This product is really cool. It is COVID-19 time now. I don't want to work out. Also helpful in the event of weather conditions. It is for all seasons if you don't work out. There is a Initially, he was hesitant to buy. I am telling you the value of my money.
👤The BalanceFrom Bike Trainer Stand was purchased to help with the hot summer in Arizona. I recently started biking as part of my weight loss regimen and it has become a regular part of my daily routine, until the heat hit. It's difficult to do serious biking at 120 degrees. There is a Setting up the trainer took about 15 minutes. I put one of my "good" bikes on and that became my indoor trainer after I tried it with a different bike. There is a The trainer works well, but I worry that the resistance is not as much as I would like, but I think that is a limitation of magnetic resistance. There is a It has improved my cycling ability. It has increased my speed on my bikes, and kept me strong. The tire noise and debris from a regular knobby is not really enjoyable if you are mounting a mountain bike. The trainer tire makes it better. It seems like it will last forever. Very happy with the purchase!
It is easy to clean and store a bike cover with a damp cloth or hose. The carry-on storage bag is convenient to use. The light problem will cause the color to have an error. Ultra SWEAT-ABSORBING: The dual-layer design of the bike frame sweat guard can effectively hold most of the sweat and save the frame and bottom brackets from the ravages of heavy sweat. The bike trainer accessory is very easy to mount because of the elastic loop around the seat and two front high-sticky hook straps. You can install or remove the bike sweat guard in a single minute. The triangular design with a wide front and a narrow rear can absorb sweat and ensure that your knees don't hit the fabric even when doing stand-ups. The length of the bike frame sweat net can be adjusted from 22.65 to 31.49inch. There is a wide application. The bicycle sweat-absorbent net is a good accessory to keep your bike clean and is specially designed for cycling exercise, lightweight and portable. There are some important things to know. They recommend washing the denim by hand in warm water below 40 degrees.
👤I like that this saddle works for me and my husband, we are very little people with narrow hips. The memory foam on this saddle helps with comfort on my muscles and soft tissues. I like the way it is designed, but I don't like the way my head set bars are too long, it's a great saddle, it's water resistant, and easy to clean after use. Ride on!
👤I have a bike with this on it. I was worried that sweat would hit the frame or the belt, but this solved the problem. It is easy to attach because the straps are flexible, and it looks decent. I use it to hold my phone.
👤I own a Aerofly 2 handlebar. It is a little curved. The sweat guard folds in the center when used on the handlebars.
👤Useful item. It keeps the bike clean and protects it from sweat. It is very easy to install and adjust. I touch it occasionally when I'm upright. It wasn't a problem.
👤Nice piece. It's easy to put on. The fabric material could be longer, but it's better to recommend it highly for the price.
👤The job is inexpensive. Nothing else to say.
👤It works on 54 cm with a 100mm stem.
Bicycle trainer sweat guard products from Kom Cycling. In this article about bicycle trainer sweat guard you can see why people choose the product. Geediar and Wahoo Fitness are also good brands to look for when you are finding bicycle trainer sweat guard.
Kom Cycling, Geediar and Wahoo Fitness are some of the best brands that chosen by people for bicycle trainer sweat guard. Find the detail in this article. Cycleops, Cyclingdeal and Saris are also brands that their products are worth to check.