A cooling system moves air through a trainer to keep it cool. No need to disassemble or remove the wheel from the bike. Quiet. Quiet and consistant ride are provided by fluid resistance. The noise level is 69 decibels. Linear resistance. Click to boost workout intensity to match each pedal stroke and gear. It'sIVITY: You can use your favorite speed or cadence sensor with indoor cycling apps. Rouvy virtual training app is included. COMPATIBILITY: Steel quick release skewer is included for common road and mountain bike frames. The trainer has a foldable frame, leveling feet, and a cooling system that moves air through the trainer to keep it cool.
👤The previous version of this bike trainer was very good. The rear roller is plastic and only has about a hundred miles on it, so it will wear through in no time at all. This item is not good and not sure why anyone would build a high resistance area with plastic. I was not happy with the quality of the product and what I paid. The rear roller in the pictures looks like it is made of metal, which would not wear out, so it would be great if I could get what is actually pictured. I expect better for the money. I would understand if you went on eBay and spent 15 bucks for a trainer that was terrible.
👤This trainer is amazing. I have been using it for several months now and it works great. The remote shift apparatus might not work right out of the box according to some reviewers. There is a metal collar on the connecting cable that can be easily adjusted to increase the tension on the cable, which allows it to operate properly. The instructions that come in the box aren't very clear about this, so it could be difficult to figure it out. The remote shifter is amazing. I don't know how I would ride inside without it - it allows me to gradually warm up and cool down, as well as simulating hills, etc. I did not have to get off the bike. It's a sturdy trainer. You don't have to swap the axel that came with your bike for the one that is required for the trainer, because you can ride on regular roads and trails. This allows you to switch between riding your bike in the trainer and outside. If your bike has large diameter tires like mine, you might have to prop the trainer on something if you ride on carpeting, otherwise the wheel will rub on the carpet. This won't be a problem if you have smaller wheels.
👤I was able to put this together myself after I called customer service. Customer service was very helpful. I bought a climbing block that keeps the bike stable. I put the Wahoo app on my phone and added a RPM cycling sensor to the pedal arm. I am very pleased with the setup.
👤This is a very good trainer. It is easy to use. The noise level is not loud. I use it with a floor fan in front of the bike and it is not an issue for me. There is a The resistance is not adjusted while riding because of a knob on the side of the resistance unit. My road bike has a wide gear range, so I just set the resistance unit to a middle value of 2 or 3, and change gears on the bike for a harder or easier workout. If you are using a single speed bike, you may want to consider a model that allows you to change the resistance while riding. There is a The included quick release gives a solid engagement and the bike mounts easily into the frame. It only takes a few seconds to get the bike on or off the trainer since the locking mechanism is open and closed. The resistance unit knob should be tightened to engage the rear tire. I found that it was too tight for my tire and that it was not enough for solid engagement. The size and type of tire being used will affect this. There is a The trainer had a poor paint job on the frame. When I opened the legs, there was a lot of yellow paint that flew off, and more paint was chipping off when I used the sliding locking mechanism. In some places the paint looked like it had been applied before the welds cooled. I contacted CycleOps about the poor paint job, and they immediately sent out a replacement frame. I was very pleased with the warranty service of CycleOps, the new frame has no paint issues. The trainer has a lifetime warranty. There is a This trainer is a good choice if you are looking for an inexpensive, solid basic resistance trainer.
A wide base and low stance for unshakable balance is what stability on any surface is built with. 5 rubber feet that can be adjusted to even out any flooring. Spin In Silence: Smooth, seamless design and noise reduction resistance wheel mean you don't need to increase the volume when you build up the burn. If you use a road bike, the noise will be louder. Train to your standards with a bar-mounted remote and wide range resistance curve. Ready to head outside? You can easily release and remove your ride by hitting the press-down lever. Installation of the front wheel riser block and rear quick release lever can be done quickly. The stand is great for road and mountain bikes with a 26-28" or 700c wheel.
👤This thing has been very difficult. It's loud and shakes the walls in the room I have it set up in. I'm sure there are better options out there, but it's too loud to use as intended. I've tried to make it work for months and it's a huge disappointment that the time has passed. The company saw the review and sent me a new one. The replacement is in good working order. Customer support is great. Buy with confidence.
👤The setup for this bike stand is easy, it is pre-assembled and ready to go, the entire setup to attach the bike took only a few minutes. The unit works as advertised, the quality was better than I expected, and setting up was easy. This unit is easy to set up and affordable for those who want to ride but can't during winter. Resistance can be adjusted with a switch mounted on the handlebars and by going through the bike's gears. To remove the bike, you need to remove the handlebar switch, then move the red handle to release the rear of the bike. I would recommend this unit to others.
👤My wife and I love the trainer, it's easy to setup, it's a good price, and it's a great accessory for the #Suffes Fest App in the IOS. Can not go wrong with this, used along with an app or alone, will do the work, Lets see it in a year after of 4 - 5 hours weekly use.
👤This is a good purchase. I swapped out the dh specific tire for a road tire to reduce the noise and not chew up the tread on a maxxis minion tire, it fits a downhill bike just fine. The setup is excellent and should be used for pre and post surgery.
👤I bought another trainer and couldn't figure out how to set it up. It looked like it wasn't compatible with my bike. I gave up on bike trainers after running out of patience. I find this product. I read reviews that said "set up in 5 minutes" and other good things. If it takes 5, it will take me 20. I thought it was connected with magnets. Silly me. At this point, I don't know what part are magnets. I had trouble hooking up my bike because the directions were not clear for someone who needs everything spelled out clearly. The images were small and not showing what I needed to see. I finally figured it out! I had to replace my release bar for the rear tire with theirs, which they have in the box for you, and it worked. The quick release is so cool. I use my iMac in my front of my bike to watch training videos or scenic routes while I work out. Why do people buy the Peloton when it is just as good for a fraction of the price? I have a phone. I can watch the videos on my iMac, if I use the right software. I would have gone the route of air displaying my bike from phone to Apple TV if the TV was in another room that I didn't want my bike in. This will help you, so the 8 of you in the world. I don't think so. The resistance thing on my handle works well. It doesn't fit on my handle, so I put it around my front gear wire and it stays-ish. I think her knob was installed upside down, because a reviewer said hers was working in the opposite direction. It works great, but mine was just fine. It took me 20 minutes. I love it! I wish I hadn't given up on trainers the first time around, and just got this one after the first one didn't work out. I have an exercise outlet during the winter. No gaining 15 lbs over the holiday. It was quite obvious.
The tote bag is heavy-duty. SAFE & STURDY FOLDABLE FRAME The bike trainer stand is made of heavy-duty steel and has a solid triangle structure to ensure safety. Wide base and low stance are very stable. The front wheel riser block and anti-slip rubber pads are included. MOOTH & QUIETER MAGNETIC SYSTEM The bicycle exercise stand has a magnetic system that reduces the noise. The metallic smooth surface works with all kinds of tires. No more noise complaints from you neighbors! 6-leVEL RESISTANCE SETTING A bike resistance trainer has 6 resistance levels. Different kinds of roads, hills, and interspace can be replicated easily. The resistance difference works best after 30 minutes of exercise. MUST-HAVE FOR CYCLISTS. The portable exercise bicycle stand is a replica of a real bike stand. Don't let bad weather stop you from working out. All-season biking can now be done at home. The material is lightweight and easy to travel with. It is easy to install and widely compatible. The Training Bike Stand is easy to assemble. A quick release skewer ensures compatibility with most 26"-28" wheels road and mountain bikes. Max. The bearing capacity is 300 lbs.
👤The shipping container was torn open and the packing styrofoam packaging was thrown into the box and sealed. There is a The trainer is well built but the instructions are not very good, the parts are not listed on the parts list, and I'm missing two pieces of hardware that attach the resistance motor to the frame. I'm a trained military jet mechanic and have hardware at hand that'll replace the missing fasteners but the assembly instructions are so complicated someone without any mechanical ability will have a hard time assembling this device.
👤It's one star. I am trying to be nice. The instructions are not easy to follow and the pictures they have that go along with them don't show you what to do at all, so I didn't know what to do with it. The instructions tell you to remove one component and replace it with another, but I wasn't sent that component either. I haven't been able to put this stand together using what they provided and didn't provide the screws, so I'm writing this review I would have given one star. Most of it came together. I may change to a one star if the bike is secure. I don't think anyone should get this product. Not worth the money. I have to find out how to put this thing together.
👤It takes a bit of effort to put the stand together. The instructions are not very thorough, but once I did it seemed to go well. So far it's working for me, I only had it a short time.
👤I don't think I can use the skewer provided or my existing because I have a 3 speen bike. There was an extra piece in the box. The unit does not work on 3 speed bikes. This should be documented in the description. The vendor quickly returned my money.
👤I paid for a new product and the one I got looked used. There was a scratch on the metal and the cable had white paint all over it. I put it together after cleaning it up. It works like it should.
👤We put the packaging out for the garbage pick up after unpacking. We didn't know that the screws and bolts didn't come out of the box. We had to go to the hardware store to put it together.
👤I es my solo. UN problemita. Suena UN poco una desanibelado tengo.
The foldable framework is easy to use. The portable stand is lightweight and portable so you can pack and go, it comes with a sturdy bag for easy carrying and storage. When the weather is bad, it is annoying for people who love cycling. You can keep riding with this indoor bike trainer. You mount your bike on the trainer and begin to ride. The two knobs on the left and right of the stationary bike trainer make it easy to lock your bike in place. The joy of cycling at home. The indoor bicycle training stand is designed with dual-support structure to make it stable and steady. The package has a strong frame and front wheel riser block to keep it stable. The structure can hold up to 300 pounds. The anti-slip rubber feet fit for the floor in different conditions, preventing movement for stability on any surface. Smooth exercise bike trainer is needed for riding at home. The noise reduction wheel makes it hard to hear the wheel on the trainer. The material and tread of bike tires affect the noise. It is recommended to use slick tires to reduce indoor resonance or add a carpet under the trainer. If you owned rough tires, be careful. Even though the trainer is expensive, it is possible to be loud. It is designed as a folding style so that you don't have to carry it. You can begin to ride at home with quick installation. You can fold the bike trainer when you finish exercising. You can either put it in your home or carry it to another place. The Unisky indoor bike trainer stand can fit most road or mountain bikes with a 26-28" or 700c wheel. If you have a road or mountain bike of normal size, you don't need to buy a new one. The bike trainer is usually not compatible with electric bikes. If you're not sure, please contact them.
👤I bought this because I was reluctant to go to the gym. I was concerned that some reviews said it was loud and flimsy, and others said it was hard to install due to poor instructions. Here is my experience. Loudness. The bike we installed had knobby tires and high pressure against them to make it resistance high. How loud is it? You can hear music when you use cheap headphones. You wouldn't sit in the same room and watch TV. A) You can go down the hallway. Do a zoom meeting, shut a door, watch TV, etc., and be well isolated from the sound. This seems fine to me. There are two more We use it every day for over an hour on the average. It's made of steel and holds the bike in place. I could not describe it as robust. I don't understand the reviews. There are 3 more It is hard to assemble. I'm handy. I did not read the instructions. The rear tire will fit with the fixture if you remove a part from the bike. It was obvious to me. The only hitch is that the bike fits into the holders. I had to push it. It would be a better stand if it was a half-inch wider. It works well for us and is reasonably priced. Money was well spent.
👤If you don't have a quick release rear tire, there is another kit you have to buy to make your bike fit. There is a The other kit is not available.
👤This product arrived early and made me happy. I wanted to keep riding my bike through the winter. The product is perfect for that. The mat is to protect my carpet. There is a It is loud. It sounds like a vacuum cleaner. I live in an apartment. It had an easy setup. It took 10 minutes.
👤I tried my husband's bike after hours of trying to take my bike apart. It took 30 seconds for him to install his quick release rear axle. The product works. If you live in an apartment, beware.
👤I bought the Unisky Bike Trainer for my husband who loves to ride his Mountain bike outdoors but he can't because of a knee replacement. He takes physical therapy at the hospital 3 times a week and now he can work on his knee to get better. This is the present he received from me and his little princess.
The portable bike exercise stand is portable. They designed the bicycle training rack to be a folding style in order to make it easier to carry. It only takes a minute to set it up and adjust the contact between the wheel and roller. You can put up or unfold the stand to complete the installation and disassemble it. A quick release. The stationary bike trainer's handle can release the bike off the trainer quickly by lifting up, and also can lock the bike to the trainer quickly by pressing down. The indoor bike trainer is very easy to use. 6 speed restriction You can change resistance to comply with the cycling conditions you want with a remote controller. You can ride after quick installation. The 1-2 speed offer less resistance than the 5 or 6 speed. STEADY, STABLE, ANDFIRM: The dual-support structure of the indoor exercise bike trainer is designed. The package includes a wide frame and front wheel riser block to keep it stable. The anti-slip rubber feet fit for the floor in different conditions, preventing movement for stability on any surface. A smooth bike exercise trainer is definitely needed when riding a bike at home. The bike trainer makes your cycling very quiet. If noise is loud, they suggest you use a slick tire because of the materials and tread on the bike tires. The Unisky indoor riding bicycle training stand can fit most road or mountain bikes. If you have a road or mountain bike of normal size, you don't need to buy a new one. Bring your bike to the gym. Take the bike off the trainer and put it at any corner.
👤I decided to try out a trainer since I am not comfortable with road riding and there is no nearby trails. This thing is strong. I was worried it would be wobbly but not at all, and setup was easy. It is a little loud, but I think it is the fault of my bike tire, and I usually wear earbuds on it. Even though this is the first trainer I have ever used, I have nothing to compare it to, and even though I am out of shape, I can still ride just fine. I will be able to take it for a spin outside by next spring.
👤I didn't read the directions and I wasn't paid. It took five minutes. If you need help putting this together, you should wear a helmet.
👤I would buy this again. The reviews were showing that this was great. But then it was! I am very happy with this purchase. I bought this for my road bike, the noise is very minimal and not at all what I was expecting from the other reviews, but again it could be because I have a road bike and not a mountain bike. I took the bike out of the box and locked it in place, there was not much to the setup. The quick release handle is very good. Great product! Highly recommended!
👤This was very stable to use and easy to set. It is loud like a chainsaw but higher pitched.
👤It took 20 minutes to put it together. You could guess what was needed by looking at the pictures. The reviews said this was a noisy machine. It is not that bad compared to a stationary bike. No one complains about the noise. It feels sturdy and fun to use. It works great with a mountain bike. I wish I had bought it earlier.
👤I bought this back at the end of the year. I believe it was delivered quickly and packaged well. There is a The set up was difficult for some people that don't care much for detail. I could not get the back tire of my bike to be centered on the roller of the trainer. Customer service returned my call within a few hours. They thought it was because of my tire width. I have a standard road bike from the early 1990s that has a quick release skewer. The issue is that the red handle on the trainer should come out further into the center when pushed down. I replaced my skewer with the one they supplied, that helped a small amount, the end caps on that skewer come out a bit more than my skewer. There is a The trainer works well. It is not loud. It makes some noise depending on what gear I have my bike in, what resistance I have on the dial, and how far the knob is on the trainer roller. The tires on my bike are very thin. I wear earbuds and it's basically quiet to me. There was a learning curve to using the resistance dial, but once you figured it out, you can find the resistance you want. To get this all to work, you have to tighten the resistance knob on the trainer. The bike on the trainer is stable. The combo works well with the trainer block I bought. I can pedal from time to time, which I do carefully. I have been using this trainer for about an hour a week since January and I am very pleased with it. Customer service gave me a percentage of the price back because of my troubles. Good product, good company for me.
There are two things that are not provided, the first is the USB hole on the basis and the second is the fact that it is only for do-it-yourself purposes. There are two The tension screw should not be adjusted without the monitor on it. There will be noise when working with rough tires. Quite when working with road bike tires. rubber feet prevent scratching wood floor, works on any surface. A wide base and low stance for unshakable balance was built. The max load is 330 lbs. It is easy to install and release. The quick release is used to tightly hold the rear wheel. It's easier to take the bike down than other bike trainers. Magnetic resistances meet your needs for resistance and speed, and the handle bar mounted resistance controller lets you adjust resistance. The trainer stand is compatible with any road or mountain bike with a 26-28" or 700C wheel.
👤I was concerned after reading a few of the reviews. There were a number of 1 star with similar complaints. It is getting too dark for me to feel safe on my bike. So. This. The easy mount is easy to assemble. I was worried that the fault had happened to me because first use could not get enough resistance. Nope. I thought what might have happened to others. If the bolt that pushes the roller against the wheel doesn't seat correctly, you can tighten it, but it won't improve contact between tire and roller. You can see the pressure on the tire by seating it correctly. An hour on level 3 feels like a 14 mile ride. I can sprint but not sustain it. I don't want a permanent mount so the cable for the resistance adjustment is annoying. If mounted correctly, it stays out of the pedal sweep. After about 100 miles, all in a great purchase.
👤I'm over 200 lbs and almost 50 years old and have arthritis in my knees and back. I need something to help me get some exercise, but not so much that I have to spend a lot of money. Even if it takes a bit of time and double checking, I'm great with putting together Ikea stuff. You can look forward to the assembly of this item. All pictures are meaningless. Don't be afraid, replace your tire rod, it will work. The front wheel chock is very strong. This will raise your bike by 2 inches. If you have some knowledge of interpreting image to ease reality to use, it's easy to put together, but I need a foot stool to get up the 2 extra inches.
👤This product is really cool. It is COVID-19 time now. I don't want to work out. Also helpful in the event of weather conditions. It is for all seasons if you don't work out. There is a Initially, he was hesitant to buy. I am telling you the value of my money.
👤The BalanceFrom Bike Trainer Stand was purchased to help with the hot summer in Arizona. I recently started biking as part of my weight loss regimen and it has become a regular part of my daily routine, until the heat hit. It's difficult to do serious biking at 120 degrees. There is a Setting up the trainer took about 15 minutes. I put one of my "good" bikes on and that became my indoor trainer after I tried it with a different bike. There is a The trainer works well, but I worry that the resistance is not as much as I would like, but I think that is a limitation of magnetic resistance. There is a It has improved my cycling ability. It has increased my speed on my bikes, and kept me strong. The tire noise and debris from a regular knobby is not really enjoyable if you are mounting a mountain bike. The trainer tire makes it better. It seems like it will last forever. Very happy with the purchase!
DURABLE & STURDY: The bicycle stand rack is made of aluminum. The corner has a coating on it to protect it from nicks and scratches. It's a simple molded plastic stand for a front wheel. The bike riser block raises the front tire just enough to keep you from sliding off your seat while pedaling. The internal design guarantees wheel stability. The anti-slip feet stay in place. It's suitable for 98% of the size of road and moutain bikes. The item can be found by searching for the serial number: "B089NVTC2V".
👤There is an update! The company had a great customer service. They solved my issue quickly. There is a The item is not as deep as the picture shows. It's a no-name like a fake item. The pictures I attached show that it is different from the description. The front wheel isn't standing.
👤I don't know what I was expecting. It's something I can't live without. I used to use my roommates cats to put the tire on top of it. This made sense to me.
👤You get what you pay for. I decided to save a few dollars by buying the item instead of the model I purchased. The tire space is too wide for my 700x25 tire because it's made to accommodate other sizes. There are different slots for different sized tires.
👤The price is good. The one I ordered took longer than I expected but is shipped quickly. This is a good deal if you don't hurry. My wife used a towel that was folded up as a temporary measure. There is a This seems to be tough enough to take the weight. We use in on a rough concrete basement floor. Unless you lean on the handlebars, it stays put. It can move a bit. Why would you do that? It has no skid pads.
👤The thing slides around as if it is not there. Does nothing to fix the front wheel.
👤It was as advertised. It works for my 700x25c wheel. Holds to the floor with just enough wiggle room for sprints at the top. Highly recommended.
You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan. Fix the bicycle front fork easily. Most bikes can be adapted with the fully adjusted fork-mount and flexible sled. 9mm quick-release and 12x 100mm, 15x 100mm, and 15x-110mm thru-axles are included. Please be patient when installing the thru-axle, please install the adapter smoothly and accurately. 5 level resistance can be adjusted. You can choose between 5 levels of resistance with the 4pcs of magnets. It's perfect for indoor training or warming up at a race, it provides a realistic resistance and quiet operation, and is close to the natural road cycling experience. Sturdy and safe. DEUTER bike trainers are made of high strength aluminum. Product loading capacity and safety were increased with the solid triangular design. Portable Trainers for Travel The portable bike trainer is easy to install. It can be folded, stored, and carried with the included heavy-duty tote bag, which is easy for transportation and storage. 100% money back guarantee. They know a lot about cycling products. They want you to be happy with your indoor bike trainer. Also, note: If you care about stability, please purchase carefully, there will be a little sway in front during the ride on the trainer.
👤This will help keep me in shape. It works great for the price, but there are some things you should know about it: - Once you get past the magnetic resistance, it's actually pretty smooth sailing, and gives a darn good.
👤I have used this item a number of times, and here is my pro/cons for it. There is a It's easy to set up and put away in a good case. The product feels like quality tools are included. It's hard to pedal on the rollers because it doesn't feel like a trainer. It's a constant uphill ride with a pedal glitch. It's difficult to use the pace/speed adjustments. The pedaling on the rollers is loud.
👤It's portable and will give you a workout. It doesn't feel like a true roller nor does it inspire confidence for harder efforts. I was very excited to receive the rollers. I've had them in my cart for a while. I picked this up for an upcoming trip that's going to require a 2 week quarantine and wanted to still be able to train, ride, and Zwift while I'm out of town. There is a The only thing needed was a 5mm key to attach the legs. Attach your bike, loosen the axle, loosen the nut on the sled, and adjust the sled and lock the nut by unfolding, popping in the front legs. It took me about 5 minutes to setup, with one of the legs being difficult to fit into the opening even with the adjustment screw loosened all the way. There is a Once it's attached, you can start pedaling for the first time. The rollers don't spin freely like on true rollers, and they feel much more like on-wheel magnetic resistance trainers. It's not an issue if you've had experience with magnetic on-wheel trainers, but for someone who's never been on one it can be a challenge. This is due to the fact that on this Deuter, as well as on-wheel magnetic trainers, and even regular rollers there is virtually no build up of angular momentum as you would experience with a direct-drive trainer or riding on the road. I took out all the magnets to see if the roller fluidity would improve. I ran through a quick workout after jumping back on and firing up Zwift to see if I could find any weakness in these rollers. At 50-16 on my road bike in a sprint section, I was able to muster up an average of 416w for 1 min, with a peak of 622w, which was the same as my last test. This. Something. Sways. Too much for me. The center fork support pole still has some play, even though the bike is firmly attached and all the adjustment screws are tightened down. It looked like it was a less easy to use version of the Feedback Sports Omnium trainer. The zero resistance version of the Omnium starts at $380, whereas this was $205 at the time of purchase. I haven't been to the Omnium before but the reviews seem to suggest it is a solid product. There is a The case was larger than expected due to the generous foam padding inside. I don't know if I would trust handing it over as checked luggage without a few additional straps. There is a I would rate this product 3 stars for the design and function, but 1 extra star for its portability factor. I will update this review after I get a few hundred miles on it and see what the long termDurability of it will look like.
This is a notice. Please tell them if you have any questions about this front wheel support. They will try to help you. A non-slip design has three rubber feet caught in the front wheel to ensure maximum security. Each side of the piece has an arrow three height difference. The goal was to build the most functional front wheel block to help you maximize your indoor training. The LirTeng Cycling indoor trainer block is the best on the market because of its 700x23c to 29.3 tires, three heights to fit every trainer, and a webbed grip bottom.
It is possible to turn your bike into an indoor exercise bike, with easy set-up and quiet operation. The best trainer in the USA. Quiet is a ride that provides a consistant ride. The noise level is 69 decibels. The widest resistance range and road-like feel are offered by proactive resistance. It'sIVITY: You can use your favorite speed or cadence sensor with indoor cycling apps. It's compatible with indoor cycling apps. Rouvy virtual training app is included. The trainer comes with a quick release skewer that will work on most bikes in place of their own quick release, if a bike has a thru axle you will need an additional adapter to make the bike fit. There is a Thru Axle accessory for 142x12mm and 148x12mm bikes. The features include wheel on, foldable frame, leveling block, and cooling system that moves air through trainer to keep it cool.
👤I bought the fluid2 trainer after doing some research. I saw some reviews about the trainer and thought it was bad luck that they didn't deliver a new product. After opening the box, I have also received a used trainer. The trainer has a lot of wear and tear on it. There was a film on the trainer.
👤The cycleOps fluid2 was written by Saris. The new bike trainer is indoors. It is easy to assemble. Assembly instructions are better than average. Sturdy. It is easy to mount a bicycle on a trainer. While in use, it is very stable. I recommend the front wheel leveling block and a bike trainer pad, even though the trainer and the leveling block do raise the bicycle enough that mounting the bike is slightly more difficult than normal riding. It does make a noticeable noise. I haven't ridden in a while, but I will ride 3 miles this morning and push it on up to five miles tomorrow, on the way to my normal routine. To get mileage and speed from a Cateye computer, the sensor has to be on the rear wheel when mounted on a trainer. Wireless devices will often not transmit far enough for the sensor to be on the rear wheel and on the handlebars. I moved the wheel sensor to get my Cateye to work. I am very happy with my purchase so far. My son-in-law is a track and field coach at a college level and he uses this trainer as part of his training routine for marathons and ironman events. It seems to have been a good recommendation.
👤The item couldn't be put together. 1) The trainer did not fit the bolt action tube. It was stuck in the housing. The feet on the trainer were not level. There were scratches on the unit. There is an update. The CycleOps Fluid 2 is more expensive than the Wahoo KICKR smart bike trainer, but it is worth the investment if you want a quality on wheel bike trainer that works with several fitness apps.
👤It is difficult to find trainers. I was going to get a smart trainer, but they were all sold out. I was surprised to find this Cycleops available, but I suppose the trend is to smart machines. It's important. This is similar to training apps. The speed device is sold separately. There is a The Pros are: sturdy, quiet, smooth, even resistance, easy storage, and no extra connection/gearing needed. There is a Set up. It is not difficult, but Saris makes a booklet that is unclear at times. The BEVELED end of the tube must be slid first when sliding the pin into the bolt-action side. It's not clear in the directions, but it's important to connect to the bike and tighten things down. Make sure the fan and main power unit are connected to the same piece of metal, and that the fan blade unit is on the right. The rear dial adjustment will be affected if you reverse these during attachment. The manual doesn't show a fluid 2 trainer, which has these two pieces, so it could be easily mixed up during install. There is a The trainer worked like a dream after I got passed a few frustrating moments. My old trainer, a Giant that is 12 years old, is nowhere near as smooth or quiet as this one. I like it. I use a yoga block to elevate the front, but you can use other things. You will need an accessory if you want to use smart train. I believe this is the best non-smart trainer for the money.
It is easy to release. The front wheel riser and quick release skewer can be folded for travel and storage. A double lock system. The two knobs on the left and right of the stationary bike trainer make it easy to lock your bike in place. One bigger knob outside and one smaller knob inside reinforce the locking mechanism for each part. The indoor exercise fluid bike trainer is designed with a U-shape structure which keeps it away from wobbling and reach unshakable balance. No noise is produced by fluid design. Road bike is recommended because of the noise generated by the bicycle. There is outdoor racquetball. The riding provided by fluid trainer feels more like a road because of the fluid-impelled flywheel mechanism. The temperature of the internal fluid can be affected by the speed of riding. You can ride indoors after quick installation. You can fold the bike trainer after you exercise. You can put it at any corner of your home or take it to another place. The Unisky fluid bike trainer stand is compatible with most road and mountain bikes. If you have a road or mountain bike of normal size, you don't need to buy a new one. Bring your bike to the gym.
👤We got this a few days ago. It is stable for my mountain bike and my 200 lbs., and it fits our 26" bikes well. My son and I have used it with heart rate monitors. Getting into reasonable workout heart rate zones is not a problem. It isn't easy to ride up a steep hill or a high end spin bike, even if you could stand up, because I need higher resistance to stand up comfortably. If you are in good shape, you don't need to get a lot of intensity for something like tabata or other interval work. It's for low impact, low and moderate aerobic training.
👤The trainer arrived early. There was no need for an assembly of the trainer. The legs were extended when it was taken out of the box. I switched out my road bike's quick release and was peddling in a matter of minutes. I was worried that it would be loud. The road bike is not louder than a stationary bike in a gym. I put it in the loft of my house to protect the carpet. I could not hear it at all. It provides enough resistance for a good workout. I did a lot of research and comparison shopping for this on Amazon and am very pleased with my purchase, it's either more or less resistance if you shift gears. If you're shopping for a trainer, I suggest you look at the fluid trainer over the magnetic unit. You will not be sorry.
👤After searching for a bike trainer that would fit my bikes, I decided to buy this one. There is a Overall thought is good so far. It has enough resistance that it can ride a slight grade. The design of the bike is strong and does not let it fall off. It does not seem like you will tip over once you're on it. It fits my bikes. There is a The bad is nothing really to take a star from, but I wish the manufacturers of these would make or include the accessory for the bike. I want to be able to get my son on his bmx and practice sprints in the house. I'll have to check to see if this brand has the accessory. The product is good and the price is good. It feels like a solid product that will last, and I've been on it for a few days now. It's easy to fold up for storage.
Bicycle trainer stand products from Saris. In this article about bicycle trainer stand you can see why people choose the product. Sportneer and Walmann are also good brands to look for when you are finding bicycle trainer stand.
Saris, Sportneer and Walmann are some of the best brands that chosen by people for bicycle trainer stand. Find the detail in this article. Unisky, Unisky and Balancefrom are also brands that their products are worth to check.