Best Bicycle Tools Crank

Tools 6 Dec 2022 10+ Comments Open

1. Skylety Remover Bicycle Crankset Maintenance

Skylety Remover Bicycle Crankset Maintenance

You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. The crank remover is made of quality carbon steel material and quenching process to make it stronger and last for a long time. The bicycle crank puller is a standard size. The 8 x 2.4 x 2 cm/ 3.15 x 0.94 x 0.79 inches is a compact size and light in weight. They allow you to store and carry outside. The bike crank removal tool has a dual function cap, so the pulley can be applied on over-sized spindles, making it more convenient to use. The bike crankset crank arm puller is a necessary tool to repair the bike by yourself. The cycling bicycle bike crankset remover can be used to remove the crank arms from the bottom brackets.

Brand: Skylety

👤Do not use it. My threads were stripped by this thing. The person who made this thing owes me a new tool and crank arm.

👤It was loose when it was inserted into the crank, and when it was tightened, it pulled the puller out of the threads. I don't know how I'll be able to get the crank off with a quality tool.

👤The threads were stripped on the first use. Do not buy. It ruined my crank arms, I'm notnimpressed with this puller.

👤It was difficult to set it because the threads weren't smooth. The mechanism that was pulled loose from the threads when the inside bolt started was because the bolt that screwed into the crank couldn't seat securely. Don't waste your time and money on this product.

👤This thing worked great for me, but I am not sure what other reviewers have been doing wrong. My wife's bike had both cranks removed. After using the tool, the threads on my tool and cranks were in great shape. I tightened the tool as far as I could. I used a wrench to tighten it down. I wonder if people tightened it too much and that's how they ended up stripping the threads. Who knows?

👤It was used to pull a crank arm. Once seated, the threads were screwed in and used a crescent wrench to turn them out. It was pulled with little force. I wonder if it was on old mangled cranks or if it was a stripped thread. The tool seems to have been made with care.

👤The unit didn't work for me, but it wasn't good. The tool pulled the inner threads out of the crank after it's grip was pulled. The crank was probably seized. There was no fault of the tool. I will consider heating the crank up with a torch before applying more pressure.

👤The threads for this thing are not very sharp, or they were not cleaned after being cut. There are points where the threads catch. If you do a good job of lubricating it, it will work.

👤The device is too small and narrow for OCTALINK and ISIS cranks, and it got stuck in the threads, but I was able to get it out. I used an M8 washer which is 16mm in diameter and was able to remove the crank arm, which was a problem for me. The device is ok for occasional use, but manufacturer should review the size if the additional foot or two different sizes are provided.

2. Oumers Bike Crank Extractor Professional

Oumers Bike Crank Extractor Professional

The common bicycle chains are suitable for most of the bicycles. It's a good fit for any brand bottom brackets. The quality of the steel used in the bike crank extractor/puller ensures that it won't damage the teeth. It's suitable for any 20 teeth type bottom brackets and Standard Square crank sets. The bike bottom brackets can be removed with either a 24mm sockets, wrench or an adjusted spanner. It is ideal for any home bike mechanic. The bicycle crank removal tool set is long lasting.

Brand: Oumers

👤This was bought to remove the crank arms from the bike. The piece that screws into the arm appears to be very strong and well-constructed. It was threaded into the correct position. The threads are not well-defined, and the sockets/bolt portion that is tightened against the end of the crank's shaft doesn't seem to be hardened. There is a If you screw one into the other as a dry fit test, the two pieces will fit together. The first attempt to remove the crank was unsuccessful as I couldn't get enough Torque with the included wrench. I had to use a longer wrench for my second attempt because I had to separate the two parts. The bolt/socket piece was stuck in the darker colored part because of the force used in the extraction attempt. The pieces had to be separated with two tools. I had applied grease to the threads, but it didn't help. I didn't observe any obvious damage to the threads, but I think that the slightly inferior material may have allowed this binding condition to develop during the stress of Torque application. There is a The binding between the two pieces was repeated at each attempt to remove the two cranks. I feel that this was a decent deal, as compared to the more expensive tools that can be obtained. I'll probably never use this tool again, because the need won't be there. If I was in a position where I needed to use this type of tool on a regular basis, I would choose a higher quality tool.

👤The tool worked well. I think people have problems because the cranks on the bicycles are dirty and frozen in place. Before you start, take the inner bolt out of the tool and put the outer part into the crankset. The threads may be dirty and the tool may not work. You may have to do a series of back offs and tightens to get the tool all the way down into the crankset. Don't cross thread. Put the inner bolt in the tool when it's screwed in. The crankset may be tight and you may need a bigger wrench to pull it. A bigger wrench may be able to remove the threads from the crankset. You can use a hammer to tap the inner bolt and crankset. The tapping will loosen things up. The best way to tighten the bolt is to tap. The tight crankset came off without a big wrench when I did this a few times. I did not use the bottom puller.

👤If you know what you are doing you will not have any issues with this tool. I almost didn't buy it because of previous reviews, but I decided to buy it anyway. The secret to removing 3 piece cranks is to thread the tool all the way onto the crank arms until it bottoms out, then tighten the center bolt. Once you have a medium amount of pressure on the center bole, you can use a rubber mallet and tap the crank arm a few times from the inside out to loosen it. Work smart not hard.

3. Odoland Including Extractor Flywheel Sprocket

Odoland Including Extractor Flywheel Sprocket

The headset lock ring tool has a bottom brackets. The chain rivet extractor and assembler are made in Taiwan. One year warranty. The package includes a crank extractor, bottom brackets remover, 16mm spanner, and Cassette removal tool. It's a good fit for any bike bottom brackets. The bike crank Extractor is made of high strength steel. It will not hurt the teeth. It's suitable for any 20 teeth type bottom brackets. A 24mm sockets, wrench or an adjusted spanner are all that can be used with the Bottom Bracket Remover. The Freewheel Chain Whip Remover is suitable for variable speed flywheels. Fix the flywheel when you remove it. One of the practical tools. It's a must have for outdoor riding because of all the necessary bike repair tools.

Brand: Odoland

👤The bottom tool brackets are not useful. I damaged my bottom brackets. See the pics. Play dough is used to make the crank extractor. The cassette tool is printed. The pics compare with park tools. Don't buy this at any cost. It won't hurt your bike components. I spend the extra buck and get something that works, even if I am not affiliated with park tool. Happy riding!

👤The rear wheel was damaged in an accident. I didn't like the cassette number of teeth on the set of wheels that my friend sold me, it was slightly different from mine. The removal of the cassette from both rear wheels was easy thanks to the bike repair tool kit. The installation was easy and I was out riding in 2 hours.

👤I would add picks of the tools bent up and worn out on first use, but many others already done this, so I am just going to agree. Quality metal tools are needed to prevent damage to the bike itself, because old bike parts don't come off easily. If you have a new bike, the soft metal tools might be ok, but I would look elsewhere if I were to do it again. It's not worth the risk of damaging a bike.

👤The chain whip, crank puller, and wrench are all decent budget tools, but the splines on both the bottom and freewheel tools are too narrow and soft to fit sun tour components. They will destroy your bottom brackets and freewheels. If you need a budget chain whip and crank puller, but don't want to spend a lot of money, you can buy this.

👤A guy or girl gets back to repairing their own equipment. A starter is needed to get the bike fixed. It was delivered with care.

👤The key to life is tools. These are not different. It's worth the money to break loose those old seized cassettes. The person is Mikie Likie.

👤The crankset and the bottom brackets have been removed by me. The tool that removes the brackets is garbage. After 1 use, the teeth are trashed and no longer work. I need a new tool to finish my project. These tools are a waste of money and I can't recommend them.

👤I'm not a professional bike mechanic, but these are very quality tools for someone like me who needs to fix my own bikes. Fast shipping.

4. THYWD Removal Bicycle Freewheel Splitter

THYWD Removal Bicycle Freewheel Splitter

The pre-applied rubber patch can be used to repair a punctured tire without the need for additional glue, and it is guaranteed to be 100% satisfied for 30 days. The bike repair tool kit set is made of high quality carbon steel, some parts of the tool surface are plated with nickel, and it is very durable. The bottom toothbrush REMOVER. The bottom brackets can be removed with 20 teeth and are made of carbon steel and nickel plated. CRANK EXTRACTOR: It's suitable for square tapered crank sets, it's easy to install and use, and it's extendable for removing chain-rings and crank. It works for all common bicycle chains and has a double driving pin for easy chain breaking. The free wastewater REMOVER is. Remove the wheel from the bike with 12 teeth, if you have a wrench or an adjustment wrench, or if you have multiple-freewheels and other tower wheels.

Brand: Thywd

5. Cassette Auxiliary Portable Emergency Accessories

Cassette Auxiliary Portable Emergency Accessories

You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. The chain whip tool is used to remove Cassettes and Bicycles from replacement Hubs or Adjustments. All in one set. One tool can replace three other tools, save space, and carry more convenience. Bicycle Cassette removal Chain Whip Chain tool, Cassette / Rotor Lockring tool with Pin, Freewheels Remover fits for any brand 12 teeth Splined type freewheels Cassette Lockrings. The Cassette Lock Ring tool is designed to be used in conjunction with it. Tighten On Screw-on Freewheels can be done with the Sprocket Remover. Caters for 7, 8, 9, and 10 speed cassettes. Do not use it if you don't want to damage the bicycle and repair tools. Smooth operation and long life can be achieved with the use of the Crank Extractors. If you have a better experience and suggestions, please let them know.

Brand: Matykit

👤I'm a novice at bike tech but since I've purchased a bike, everything has become more complex. I'm learning how to do small changes myself and this kit helps a lot. I was having issues with the cassette on my rear wheel and it stopped rotating. I could tighten it with just a wrench and cassette insert, but this kit made it easier. Thanks!

👤The chain whip needs to be longer, I have hurt my fingers using it, most of the gadgets are helpful. Hope you don't feel that pain.

👤I cannot establish a good grip on the chain whip.

👤The complete set was used to update my old MB into a Electric MB. After almost 40 years of service, Specialized got a new lease on life, and so did I.

👤The kit is not complete. There is a The chain whip wrench is missing. Will someone be in touch with you? I need a chain whip wrench.

👤There are a lot of fine tools. I have no problems with them and now I have bike tools.

👤They are good. I don't have to borrow from friends anymore. It was delivered fast.

👤I haven't had my bike brake down to where I need it, but it looks sturdy enough to handle the jobs they were designed for.

6. Piece Bike Tool Kit Maintenance

Piece Bike Tool Kit Maintenance

The tool steel is heat treated. The complete bike tool kit. The CYCLISTS 23 piece bike tool kit contains everything you need to keep your bike in top shape. It is easy to use. The Bike Repair Tool Box is a set of tools for bike mechanics. The CYCLISTS bike tool kit is a must have for bike maintenance and is a great option for a mobile tool case. The bicycle repair tool kit is included. A chain rivet extractor, a chain ring nut wrench, a Crank puller, a Freewheel turner&lock ring wrench, and a Bottom brachet wrench are included. A tire patch kit, a lockring removal tool, and a flat/phillip screwdriver are included. The material is high quality. Major in bike accessories more than 10 years, they know a lot about cycling products, this bike tool set made in Taiwan is world excellence of cycling products. The tool set is made of premium carbon steel and high quality plastic. 100% money back guarantee. There is a quality guarantee for 12 months. They want you to be happy with your new bicycle repair tool kit and they will do everything in their power to make sure you are happy with them.

Brand: Cyclists

👤The kit is good quality. I like the way the tools fit in the case and it makes it a great portable kit. There are a lot of tools to work on a bike.

👤The quality of the tool set I bought was not as expected. There is a I am happy with the quality and the tools are sturdy and fit perfectly, even though there are only 23 tools in this set. There are 23 of them for normal bike repair. I used this tool set to fix 4 bikes, including removing wheels, replacing axle, detaching chains, adjusting shifters and brakes, and patching and replacing an inner tube. I had to buy a Park tool to replace my freewheel tool because it was designed for bikes with cassette, not freewheel. It would be better if this toolset included a ruler for chain, bearing, and maybe axle, a needle nose plyer, or an adjusted wrench for rim brake adjustment. There is more space for a small bottle of lub. I put one of my plyers, a small Stanley wrench, and a mini measuring tape in the case since there is still some space. There is a I have to put grease and lubricant in another case after the case is stuffed.

👤This was a good deal. I wanted a complete tool kit for my mountain bike repairs. The tool kit I ordered was very handy to install the cassette, unlink and shorten the chain, and remove the crank and peddles. The only tool I needed to purchase was the hub wrench from the kit. The quality is good for the bike tools, but it's all in one kit. I keep it in my truck. I put in a pump and plugs for tubeless tires. I have a repair shop.

👤The quality of the kit was not up to par. The 15mm didn't hold up to loosen a wheel nut. It should not have become damaged. I used the kit to repair bikes at a Girl Scout camp and the tool selection was not really that good. The tools were difficult to fit into the small spaces on a normal bike and were awkward to use on a lot of the bikes. I don't think it was enough for me to repair and tune the bikes. Quality issues make this kit not a good one. I won't be using this kit on bike event days because I don't trust it to fail. This kit is not a good choice if you want to buy a better brand of bike tools.

👤I was considering buying a bunch of ParkTools tools. I wanted to swap out the entire brakes and drivetrain on my Santa Cruz Tallboy, but I didn't want to do it poorly. Everything I needed was in this kit. I had to buy that separately. This worked perfectly for me. I was able to swap out the free hub body, cassette, rear derailleur, crankset, chain, and both front and rear brakes with the help of these tools. The bike shop wanted to do a parts swap and I was able to save $250, so I didn't have to wait 2 1/2 weeks for them to hold my bike. Would buy it again. There is a The only complaint I have is that some of the tools are so loose in their slots that they fall out when you open them. I'm glad they have a case and aren't all loose.

7. Bikehand Bicycle Shimano Bracket Removal

Bikehand Bicycle Shimano Bracket Removal

Bike crank repair tool kit is included. The crank extractor, bottom bracket removal and 16mm spanner are needed to upgrade. The great quality of the product ensures that it won't damage the teeth. It works with any 20-tooth bottom brackets. The quality of the steel construction increases the lifespan of the tool. It works with 1/2 inch drive or 24mm wrench. It was made in Taiwan. One year warranty.

Brand: Bike Hand

👤I will only use the tool a few times in my life, and the price is great. I think the quality is good enough for someone who occasionally works on their own bikes and doesn't need to shell out a lot for a professional tool. I couldn't get enough leverage to unstick an old cartridge using a breaker bar while trying to hold the tool in place with my hand. You can get a M8-1.0x50mm bolt at the local hardware store for about a buck. It blocks the drive hole but keeps the tool firmly attached so you can use a pipe wrench and mallet to free up the stubborn cartridges.

👤I decided to upgrade my crankset. I had a bottom bracket from the same company. I bought the BIKEHAND bicycle bottom brackets removal tool. The tool is used to remove and install the sealed square bottom brackets. If you don't have a 1/2 inch ratchet, 1/2 inch breaker bar, or an adjusted wrench, the tool can be used with a 24mm socketst wrench. I used a 1/2 inch breaker bar to remove my bottom brackets. The tool is deep enough to fit over the square tapered spindle and seats evenly. I believe the tool will last a long time. The tool was necessary for me to complete my upgrade. Thank you for reading my review. I hope you found it useful.

👤I've been working on bikes since I was 10 years old. Does it make me a better person? No. It shows that I know a thing or two about tools. You may have access to a hammer and a screwdriver when you're 10 years old. We tore down bikes and rebuilt them with only a few tools. Back in those days, this tool would have been amazing. I'm still not a professional bike mechanic. I don't think so. This is a must-have tool for any bike mechanic. There is a The reviews are varied. The tool was broken and not worth your time. My synopsis is here. Is this a useful tool? No. I have access to real tools and run a machine shop. The fit and finish on this tool is not the quality that comes out of my shop. Why didn't I just make one? It would cost me a lot more than $10 to make this myself, because my shop is not all-inclusive, and I don't like using spline tools. Is this a good tool? Yes. The bike mechanic was mentioned. As a person who wants to learn to do this on their own, how often does someone swap out a car? I've been on my Giant for about 10 years and now I need to replace my bearings because I'm doing more rocky roads. I'm building a couple Schwinn bikes. The tool is for Schwinn bikes. Is this a tool for bike shops? I wouldn't use this tool for a professional bike shop since the usage would be high and the tool might not last that long. Will a park last 3x as long as it costs? There is a This review focuses on the do it yourself bike mechanics since home gamers will only use these tools a few times in the lifetime of the bike, and professionals should spend more for the tools that their shops depend on. This is a great tool to have in the home shop. It's $10. Don't hesitate if this is the type that fits your bike. There is a Don't hesitate to return sockets that are damaged or broken, and don't try them if they are clearly broken. You could do more damage to your bike. The tool that I got appeared to have some kind of spatter-sprayed finish, but it looked fine. I made sure that the splines sunk all the way down before I used the impact wrench. I kept everything straight and myBB came out even though it was tight. No problem.

8. Vibrelli Bike Multi Tool V19

Vibrelli Bike Multi Tool V19

A black bike tool bag is a gift. A black bike tool bag is a must have for bike repair. You can carry all the maintenance tools with this bike bag. It can be used as a traveling tool kit to help fix bikes when you are outside. How convenient. There are 19 precision tools, including a Universal Chain Breaker tool, open wrench, and flat screwdriver. It is easy to take anywhere with Slimline Profile, it is 3” wide, 2” deep and weighs just 6.5oz. This bike tool is military grade and can take a beating. It was made from high-tensile steel. A lifetime manufacturer's warranty is offered by the vibrelli multitools. Cyclists designed the building to last.

Brand: Vibrelli

👤I got the Crank Bros m19 instead of returning it, and I'm very happy with that choice. You need a PIA to open the flask/case thingy that comes with the Crank Bros tool. This comes with a small pouch and a small tin filled with tire patches that you can slide into the loop on the back of the pouch. It's the same as the Crank Bros tool. Don't pay more for less, get this one.

👤I want minimalist tools for biking. I put together an emergency kit. It was heavy in my jersey and still lacked a chain tool, glueless patches, and quick link. This multitool kit is mostly for me. My goal is to get to my house. I have a lot of tools and parts. I did a quick trial and it works well. It covers all of my wrench sizes. I made a modification to add a small loop. I use it to hold the patch kit. I cinched it to my jersey pocket. To strap it under my saddle. The case for the patch kit could have had a pocket placed on it. I would deduct a star, but I can't because it was a nice bonus and the tin can be refilled or the patches swapped to another brand in the future. You're set if you slip a quick link and tire boot in the case. I was on the Topeak multitool 20 until I read the reviews. There is a I improved my strap configuration. I fed a second through the belt loop after keeping the original. My last two pictures have it in the position of my last one. It's very secure, the tool can be accessed, and it has worked great on my test rides.

👤I was looking for a multi tool that I could carry with me. I was looking at crank bros. I think about 7 dollars more. I found this one. The reviews were good so I gave it a try. It is built to last and has everything you need to get home after a ride. If you bring a spare tube, tire lever and small pump, you'll never get stranded. The chain breaker tool is a 5 stars, but it flops around when you try to tighten or loosen it. I've used almost every tool on this site, from chain breaker to spoke wrench, and everything works great. I loosened my pedals with a hammer at the end of the tool and it didn't cause any damage to the tool. I lost it on a ride. I bought another one because I liked it so much. You can't go wrong buying this product.

👤I have been using a phone mount on my mountain bike. It's easy to get the phone out of it and it has never failed me. I decided to try their multi-tool since I had a lot of success with it. The pieces that are critical are Allen wrench, chain tool, screw drivers and even open wrench. There is a I like the slim design, it's easy to fit in my saddle bag with a tube, a couple of CO2 and tire irons, but it doesn't feel cheap or flimsy. There is a The chain tool is strong enough to break the chain link and you can use the entire tool to get the Torque you need. They built a spoke tightener and open wrench set into the chain tool to keep weight and size down. There is a case with a belt look option. I love it!

9. Bicycle Bracket Shimano Hollowtech External

Bicycle Bracket Shimano Hollowtech External

The bike crank puller is universal. The tool is easy to use and can be used at home. Quality: Excellent. The Bikehand YC-307BB is a triple-ended wrench. The whole length is made of high-quality heat treated steel for improved function and longer life. COMPATIBILITY I: Notch X. The external bearing bottom brackets are 44mm in diameter. Also, note: Will fit the TL-FC25 and the TL-FC 24. COMPATIBILITY II : Bottom Bracket Wrench. 41 New for 2015. The bottom brackets for the BBR60 and theBB-MT800 are compatible. COMPATIBILITY III: Bottom Bracket Wrench is new for 2015. The bottom brackets for the XTR and Dura Ace are not compatible with this. You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan.

Brand: Bike Hand

👤I needed this to tighten the center lock on my new bike. The tool doesn't fit the nut well because the handle hits the rotor and it wants to slip off. If the size I needed was on the opposite end of the tool, it felt heavy and sturdy. It would work. I can either bend the rubber handle or grind it off. It is called EDTIT. It is easy to trim the rubber.

👤The tool that did the trick was the proper one. It arrived quickly, it has a sturdy, comfortable handle, and it allowed me to do the work myself quickly and for a fraction of the cost that a bike shop would have charged me. I give this product 5 stars.

👤It doesn't at least not without modification, which is advertised as fitting center lock rotors. There is a The geniuses who designed it made sure to wrap the tool in a thick rubber handle so that it wouldn't get in the way of the brake rotor. There is a It's fixable if you trim the rubber with a knife.

👤I used to pull the bottom of the race face. Sturdy tool that can apply a lot of leverage. It's much easier to turn it in the cup style since you don't need another wrench, and the Torque is applied in-line with theBB rings, so it works better in my opinion. It has three sizes.

👤The stool is sturdy. The weight feels solid. The grip area is tight to the tool. The metal and welds are large. The engagement of the sockets was perfect. It all feels like one solid piece when you wrench on it. This is well done for a relatively cheap bike tool.

👤It arrived quickly, and it has some heft to it. A very nice tool and handle. The bottom brackets are perfect. I used it to install a BBR60 because my other tool was hollowtech II. I now have all three of the bottom brackets that I need. The quality of this tool is better than my old hollowtech II which cost more.

👤It is annoying when bike standards change frequently. Bikehand is my go to for tools like this that are rarely used. I bought a bunch of other BikeHand tools and they are all very good. Inexpensive but not an inferior alternative. This thing is not bad. It seems like tolerances are good. If it didn't scratch the surfaces, it would make it better.

10. Bikehand Bicycle Crankset Remover Removal

Bikehand Bicycle Crankset Remover Removal

It's a fit for the shimano XTR/DURA-ACE. There is a tool to remove the crank arms. The head can be removed to fit all types. The adatper was removed for the ISISBB. Strong thread is high quality. The thread of the cranks will not be damaged by this tool. The temperature is hot The tool is made of high quality steel. It is powerful and long lasting. The crank arm can be removed with a crank puller and a spanner. The video is in the listing. You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan.

Brand: Bike Hand

👤I bought an old, abused and neglected bike that I was going to rebuild. I could feel the gummy inside the bottom brackets, so I was going to have to address it. I looked at the Park brand crank and added it to my cart, but I found a cheaper one that had good reviews. I decided to buy the less expensive option since this is a limited use tool. It works well. The crank popped off when I screwed it in, one wrench to hold, another to turn. One could not ask for a better tool. mine arrived quickly... The mail was sent from Staten Island to NJ. I was very pleased with the purchase.

👤I had to remove the pedal and put the cap back on, but it wouldn't snap into place. I can only use one bike because the cap doesn't fit back on, it must have damaged the hole where it snaps back into, it's only one bike. The item was damaged after being removed.

👤Instructions for beginners would be helpful. The treads are very close to mine. If you don't tread the tool very carefully, you will lose the treads on the crank.

👤The tool is not the best, but if you use lubrication it will remove the cranks. It worked well. I had to remove the contact button from the end of the tool to fit my cranks. The contact button has to be snapped on and off. I would recommend this tool for occasional bike maintenance.

👤The driver end of the tool is too wide. I tried it on the cranks. I don't have any of the different types of cranks that have the adapter on them. The "hollow" part of the driver is what I am referring to. There is a The diameter wouldn't fit through the square hole in the crank arm, so it ends up pushing against the crank itself, which will strip the threads.

👤The crank puller wouldn't work on my bile. The square in the crank arm was not compatible with the large shaft that was removed. The ring was removed to make it work. The threads for the crank bolt were messed up when the end of the hollow shaft collapsed.

👤I needed to check the drive belt on the Vision Fitness bike. The crank was not easy to remove with household tools. I was able to pull the crank with ease. Highly recommended.

👤You can spend the extra $5 on a Park tool crank puller. The threads of the crankset were ruined when the Octalink plug was removed because of the point of contact. I need to cut off my crankset and buy a new one after saving $5.

👤Just received this and will put it to use. There were seized cranks on the 25 y/o bike. The threads are within tolerance, which is different from other tools in this price range. You need to remove the black cap from the end to use the square crankset.

11. Multi Tool 19 Black Midnight

Multi Tool 19 Black Midnight

Also available in black. Please search for the ASIN number "B00N2IIWVQ". The bike maintenance tool has 19 tools for common road and trail-side repairs. A universal chain tool, seven wrench, four spoke wrench, t-25 driver, andPhillips and flathead are included. 175 gram weight without a tool flask. The frame is made of aluminum, the tools are high quality, and the carrying case is made of steel.

Brand: Crankbrothers

👤I bought one off here and it blew up, so I told you to be careful. Crank Brothers responded to a question about how to identify counterfeit.

👤It wasn't bad. I paid a premium to get one from an authorized Crank Brothers dealer. I suspected from the beginning that the tolerances for the threaded part of the chain breaker were sloppy. I was able to spot a couple of telltale signs of a counterfeit product, including missing stamp inside case and incorrect engraving on item itself, after consulting a PDF downloaded from Crank Brothers themselves. Get one of these, but not the real one.

👤I've had my M-19 for 4 years now and get use 4 times a year, sometimes more depending on terrain and equipment. It's a primary use for recreational trail rides so I wasn't concerned about its size or weight. I don't need a lot of the tools, but in emergency situations, I would rather not have it and not need it. For anyone along the trail who might need the help. The tool has a surprising heft and is well constructed. The tools I have used have done their job well, if not at times awkwardly. Multi-tools aren't garage tools. Sometimes the length of the tools and the bulk of the device is a blessing. It's meant to do the job, and it always does for me. To keep from breaking these tools, be careful. If your bolt is moving with reasonable force from hardened steel, you need more tool or more lube. I've seen people complain about the case. I have never had a problem with it. After a few openings, the tool fits well and the lid is only 5 seconds of tedium. It still stays shut on its own, but the ease of removing it concerns me more. I paid $26usd for this and have not regretted it.

👤On the third use, it bent. Poor quality is probably made in China. This product is not good for Crank Brothers. Not a good idea.

👤I bought these for around $25 because I thought they were better quality tools than the cheaper alternatives. There is a The set is a bit heavy, but it has every size of Allen key you could want. I haven't used any of its functions yet. It's small and it fits nicely into the smallest saddle bags. There is a The material used to make these tools appears to be different from the one used in steel mills. They started developing rust spots after I bought it. Since the spots have not grown bigger, I've kept it in a dry environment. I was expecting the tools to be made of something more resistant to humidity and storms in the Northeast US, but they were priced at $25.

👤I had it for a couple weeks. So far, so good. There is a There are pros and cons. On the heavy side. The weight of a multi tool. If you're a weight freak, you might want to downsize. I don't feel it in my pack. I would be a bitch in a cargo pocket. It's kind of clunky and can get in the way of itself for certain adjustments, like bottle cage bolts, where you may need some length. Doesn't have a larger star bit tip like the two that hold disk break housings together. Not a dealbreaker. A few of the useless ones like a big old flat head would be better. There is a A good chain break tool can be beat with lots of tip options. The flask cover is nice. There is a It would be nice if it had a tire lever.


What is the best product for bicycle tools crank?

Bicycle tools crank products from Skylety. In this article about bicycle tools crank you can see why people choose the product. Oumers and Odoland are also good brands to look for when you are finding bicycle tools crank.

What are the best brands for bicycle tools crank?

Skylety, Oumers and Odoland are some of the best brands that chosen by people for bicycle tools crank. Find the detail in this article. Thywd, Matykit and Cyclists are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to