Best Bicycle Storage Stand

Storage 14 Aug 2022 10+ Comments Open

1. Bikehand Mount Bicycle Stand Storage

Bikehand Mount Bicycle Stand Storage

If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall rack on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it. There are some limitations: Before buying, please check the size. It is great for 29" and 700c bikes. Too much for 26" and 27.5" bikes. Solid and stable. A bike hub mount is made of steel. The solid stand has a weight of 5 lbs and a base of 11 inches. COMPATIBILITY: If there is a gap between the hub and frame, it is best to use a non-disc brake bike. If you are looking for a 26" or 27.5" bike, please look at the other model with a lower arm. Either YC-109L or YC-109AF. Rubber coATING: The frame and hubs are protected by the holding arm. After a while, the rubber sleeve may wear out. They have the sleeves for the replacement. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.

Brand: Bike Hand

👤If you have disc brakes, look elsewhere. If you have a Carbon frame, look elsewhere. I have a 26r MTB that I can still use. My plan was to use my new carbon framed bike, but it doesn't work well at all. I can tell you that it doesn't work well on the front wheel because it is very unstable. It's a back wheel that only stands as far as I can see. It's a good thing that the stand is a bit heavier than it appears. If you have disc brakes or a carbon bike, don't waste the return on this.

👤This is a great alternative to larger stands. I keep it in the corner of the garage until I need to take my bike down to get it ready to ride or for maintenance. This is the size you need for a road bike with a standard 700c wheel set.

👤I gave this stand five stars because it met all of the categories very well. The space restrictions caused by the Canondale Trail 2 mtn bike disc brake systems front and rear caused this 29er 700c rear hub mount to not fit either front or rear. I tried to mount on the non-disc side of the front wheel, but ended up tearing a bearing boot. I bought this after reading some reviews that said the discs got in the way but others that it worked on their disc brake equipped mtn bike. I tried to mount this otherwise quality product in 4 areas.

👤I had this on the front tire of my road bike. I had to face the hub after I bought a new bike. It works great. The quality is great and it looks good. There is a Sometimes my bike gets stuck on the stand when it isn't docked, but more often than not the Roomba will power over it. It isn't a big deal. The stand keeps everything stable when my bike is docked.

👤I am very happy with this stand. It is very easy to use. I usually wait and spend more time with a product before I review it. The stand is made like a tank and has no moving parts. It's hard to imagine it failing under normal use. I feel like I got my money's worth out of this product.

👤The stand is strong. I own a Trek X Caliber with disc brakes, and it holds my bike well. You would have a hard time tipping the bike over if it was held upright. I feel very comfortable with this floor stand because I am very careful about the care of my bike. There is an update. After 6 years of use, I just purchased another one for my Trek 5500 carbon fiber road bike. It is perfect.

2. Vertical Mountain Standing Adjustable Space No

Vertical Mountain Standing Adjustable Space No

If you have any questions during use, please send an email to them at any time, they will help you solve the problem in the first time. The bike floor stand is made of high quality steel and has 4 corners covered with rubber cap to avoid scratch ground and reduce noise. It looks like it matches your bike. It can make your bike stand up. All bikes are fit. The bike stand will fit almost all bikes, except those with the tires more than 2.4" in width. If the fender is too long, just swap the front and rear position wheels. There is space. The bike stand is free of floor space. It's perfect for an apartment, dorm room, a garage with too much stuff in it or other limited space. The length is 21.65in, the width is 20.86in, the height is 44-50in, and the width of the tire track is 3.93in. The weight is 3.8 kilo. The portable multi-functional bicycle parking rack is easy to carry and install. The bicycle can be parked vertically or horizontally with the product manual. The length is within 1240mm. The bicycle storage stand height can be adjusted up to 50” after assembly. If you have a question about the product, they will try their best to help you. If you have a question about the product, they will try their best to help you.

Brand: Eocik

👤It allows your bicycle to take up less space. There is a It seems like it is stable holding my Cannondale Quick 4. The price was reasonable. There is a Shipping was fast. There is a It wouldn't fit together because of the bent lower brackets. The box the manufacture shipped it in was in perfect shape and as hard as it was to bend (hammer and a block of wood) back into the correct shape leads me to believe it was packaged already bent. Many people would have exchanged it. There is a I suggest you buy the LuBanSir Cinch Straps, which are 2 x 18 inches, to secure the wheel to the stand. If it had arrived undamaged, I would have given it five stars.

👤I ordered 4 of them. The item works well and does not require drilling into the wall. It gives flexibility. Some manufacturers have quality problems. The screw may not line up, the metal may not be removed to make a hole, and in one package a shorter screw was provided instead of a longer one. The plastic bag was made poorly. The produce's function is not impacted by these issues. The design is good. They did not find a good manufacturer.

👤The old stands wouldn't work with the new bikes, so we bought 2 new stands. They were one of the few that could hold the weight of the e bikes. The stands could accommodate the bikes with the handlebars facing to the back or the front. There is a A cap wouldn't stay on the intended piece when one of the stands arrived. I gave the company the order number and a picture, but they haven't heard from me after 3 weeks. I would have rated this bike stand a 5 star if it wasn't for this glitch.

👤The bike is extremely unstable due to the poor illustration of instructions and the fact that the 2 piece pole was put into wrong position when drilled. One tap and it falls down. I have a smaller version of this bike stand that is different from the one I have now. All the parts are the same. It sits perfect but not for a 29" tire which is what this one does, and it is very disappointed on just one part that could make or break this stand. I'm returning it because of the lack of support from the manufacturer.

3. TORACK Storage Vertical Bicycles Organizer

TORACK Storage Vertical Bicycles Organizer

You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. The finish rails and sleeves hooks are coated with a powder. Bike storage solutions are perfect. A rail interlock design. You can display or hang your bike with 4 rails and 11 hooks. The snap-hook design of Torack makes it easy to adjust the hook spacing. 64 inches extra long rails are assembled. It's easy to organize and clean your garage with the torack bike racks. The wall-mounted bike rack and helmet hooks save space. There are wide size hooks for bikes. Hang up fat bike tires. It's suitable for mountain bikes, road bikes, folding bikes, hybrid bikes, adult bikes, and kids bikes, scooters, etc. Hanging up and taking down your bike is easy with wide size hooks. It's guaranteed to be safe. There are rails and sleeves coated with rubber. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction is used for safety loading. GS is certified. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included.

Brand: Torack

👤It's not particularly difficult to install, and seems to be holding our bikes just fine. Some reviewers have noted that the segments are not long enough to span across the two 16" joists. They are designed to butt up against each other. You have to angle the screws into the wall in order to be sure you get the screws into the wooden studs. If you have basic skills with a home drill, you won't have a problem. Would buy again.

👤I bought this item because I have two fat tire bikes and the item is advertised to handle them. The frame flexed so much that I took the bike off for fear of it falling, even though the hook fits the bikes' wheels. The only way I could use this item was to mount the frame and hook low so that the bike rests on the floor. A couple of garage hooks would have cost less than 10 dollars. I would have given the rating a zero if I could. It may work for kids bikes.

👤It only holds five bikes. You will have a hard time getting individual bikes off with that many. I drilled a hole on the top of the wall and added an extra screw because the track that mounts to the wall flexes in the center.

👤The product was given with bolts meant for brick walls. There was no information on the page or description. I paid $60 for a product that I am not able to use due to the bolts coming out the wall. Doesn't hold a kid bike.

👤The rack is strong. Only 4 full size bikes will fit on the rack, so it was a good decision to order it. It is still a very strong rack. If you don't put a stud in your wall, then you should use a larger wall anchor. Due to the weight of 4 bicycles, it will pull out of the wall with the help of the anchors.

👤There are 6 bikes that fit and one can easily access them. The caps at the end of the tracks look cheap.

👤It is easy to assemble and save a room. The item works for the studs on the center, but the trick is to hang the front and back tires at the same time.

👤The mounting screws don't align with the wall stud spacing. Some of the screws are in the wall and some are in the studs. The bike rack is ripped out even with the molly's. There is a It won't let me return this item, but I would like to.

👤There were only brick wall plugs. I had to buy a piece of timber and bolts to secure the stud behind the garage wall. Without taking a bike down first, access to helmet hooks is difficult. It's better to have them than not. I will buy another rack soon. It's useful to fit 12 bikes in less than 3.5 meters of wall space. There is a The hooks are fully down. There is a It is supposed to have lots of bikes in a small space.

4. Begona Space Saving Freestanding Adjustable 20 27Mountain

Begona Space Saving Freestanding Adjustable 20 27Mountain

Don't need drilling, no damaging walls or ceilings, it's easy to assembly. There is no scratching on the bicycles. Store your bicycle quickly and easily with the included screws and anchors. The bike stand is a space-saving design that allows for portable storage in multiple indoor and outdoor locations. Store according to your needs. The upright bicycle stand can fit almost all 20”-27” bikes with full mudguard when store vertically and horizontally. There are 26”-27” mountain bikes, 650c-700c road bikes, and 20”-24” kids bikes. The display size after installation was 21.65” in length, 20.86” in width, and 44”-47” in height. angular structure andign quality The brackets form a stable triangular structure with ground and the top hook fixes tire. Four non-slip rubber supporting feet will not scratch the floor. The surface of the upright bike rack is coated with high-quality steel and sprayed with excellent powder spraying technology. It can always maintain excellent state, long-term use and stability, even in humid or windy weather. The vertical bike rack is easy to assemble and will keep the room pretty and tidy. The package has an instruction manual that is easy to install in a few minutes. To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you. To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you.

Brand: Begona

👤The stand is easy to assemble. I ran into a problem. The arm wasn't long enough to reach inside the rim of the front wheel with either my mountain bike or my road bike. My road bike is an older steel frame Lemond, and my mountain bike is a Trek Marlin. The catch for the rim was only half way up the front tire, and it wasn't long enough to fit on a road bike with 50mm deep rim. I didn't fit the rack that I had so I really did like it and wanted it to work. It would be a great stand for smaller bikes or road bikes.

👤I got this for my college apartment since our common area is low on space and my bike wasn't helping. I couldn't drill into the wall, so I had to use the ground system. I'm happy to say that it works well. It is perfect for my Vilano Diverse 3.0. It holds it well when I put my bike in. It's easy to take it up and down. There is a The instruction manual is one of my only complaints. It's too small. I had to take a picture of the manual and zoom in on my phone to get a good picture of it. Is it too much to ask for 12 pt?

👤It's easy to put together, stable, and works great in the garage for our bikes. The only way to hang those bikes is either a complicated ceiling/pully system or a front tire wall hanger that orients the bike 90 degrees from the wall and not saving much garage space. The hanger can sit parallel to the wall. The front tire support is great, so you don't need a strap or anything to keep the front tire from flopping around, and the bike feels very secure in the vertical/upright position. It works well with my wife's smaller bike. There is a The directions are printed in a small booklet. All the tools needed were supplied. It took me about 10 minutes to put it together.

👤It's really good for tight spaces that the stand is sturdy. I use it with my road bike. I haven't tried it with a fat tired MTB. There is a The front part of the stand has a red piece of plastic that is like an inverted V shape and I would improve on that. When you roll your wheel onto this piece, it can divert your wheel off to the side. It would be better if they made this into a shape channel that helps guide your wheel into place.

5. Bicycle Parking Adjustable Mountain Bicycles

Bicycle Parking Adjustable Mountain Bicycles

You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality. The Sunix bike storage stand has a bike slot that can be adjusted in 3 different ways, from the largest width 4.2" to the middle 2.5" and the smallest 1.2" to hold all types of bicycles. This bike floor holder is more than just a bike holder, it's also a garage organizer, with an extra-wide basket and 6 hooks for storing sports equipment. There is a wonderful bike rack for garage storage. The bike rack is made of high quality steel, high temperature baking paint, and Rustproof. Enough bearing capacity to keep the bike rack stable. It's perfect for indoor or outdoor use, garage, front yards, backyards, basement, storefront or any workplace. The height can be adjusted with a 4 foot pad. It's easy to assemble this bike rack, it's just a matter of following the assembly diagram and putting it on the floor. It's easy to assemble this bike rack, it's just a matter of following the assembly diagram and putting it on the floor.

Brand: Sunix

👤The bike stand is sturdy. The assembly directions and materials were excellent. The product description for the width of the bicycle slots uses the word 'adjustable', which is not right for me. The term 'adjustable' means that the width can be changed continuously using a lever or other means. When assembling the stand, it is important to choose which width to use. Changing the slot requires undoing some bolts and moving one of the vertical rods. The middle width is the one to use for a road bike. I have two bikes on the stand, with the middle width for the bicycle slots on the two ends of the stand. It works well.

👤I have been looking for a rack to hold three bikes. Triumph! The rack is made to fit in your purse. I had the rack assembled and the bikes stored in a short period of time, freeing up room and reducing the risk of damage due to poor storage.

👤This is a nice bike rack. The box is easy to assemble and can hold two full size adult bikes on the two outermost slots of the rack. I have two bikes to store, so I haven't tried placing a third one in the slot backwards so that the handle bars don't collide with them. There is a The frame of a mountain bike or other bike with fat tires is easy to hold. There is a The metal is very light and that's the reason for 4 stars. It feels like a lightweight metal. This makes it easy to put together and move around, but it also leads to some bending of the frame during installation when installing the screws, and time will tell how well it stands up to the elements. I wouldn't trust the frame to stand up to a bolt cutter in a location where theft is a concern. All in all, very pleased with the purchase. It's nice for the price.

👤I thought I'd try the bike rack because we were propped our bikes against the house. I've had no instability issues with the 3 bikes on it, it's not mounted to the ground. There is enough room for a mountain bike and a beach cruiser. You can choose between narrow slats for narrow tires or wider slats. I chose wide slats and the tires were stable in the space. The basket on top is useful because we can keep tire pump or bike covers folded up. I haven't used the hooks on the sides yet, but I love the sturdiness andVersatility of this product. The price was great. Assembly was easy, but I found I needed more space than I thought. The price was great. I would recommend someone.

6. Bicycle Adjustable Purposes Brackets Available

Bicycle Adjustable Purposes Brackets Available

Light weight is only 6 pounds, but performs like much heavier. The bike floor stand can be assembled in the same direction or opposite for parking your bikes indoors or outdoors. Depending on your space, the parking rack can be used for dual purposes. Stable and durable are made of high-quality steel and rustproof. Extra floor anchor brackets are available for increased stability when needed. The stable floor parking rack is easy to assemble. It is assembled by a single piece of rack so you can assemble as many bikes as you want. The Universal Bike Storage Rack is suitable for most types of bicycles and fits tire sizes up to 66mm. Enough bike slot space to safely store your bikes. Assembly is quick and easy. You can assemble this bike rack quickly by following the assembly diagram. A quick release connecting pin is required. It's much easier to store a bike on the floor. Assembly is quick and easy. You can assemble this bike rack quickly by following the assembly diagram. A quick release connecting pin is required. It's much easier to store a bike on the floor.

Brand: Xcsource

👤I needed this product to organize my bikes. I spent a lot of time looking over various bike racks on Amazon and am very happy with my purchase. We have chubby 29" tires on our mountain bikes that fit nicely without getting in the way of the disk brakes. I would buy the rack if they made one for fat bikes. There is a If I'm pulling one of my bikes out of it, I have to use my foot to keep the rack in place, but if you want to screw it to a stable board so it doesn't move when pulling bikes out, the pieces needed to do so are. It can be moved easily to the yard for bike washing. It's very easy to lubricate my chain while the bike is in this rack. I love it!

👤One of the pieces with upcurved tubes that are welded to the base was the problem until the middle piece. One of the upcurved tubes wasn't fixtured correctly so that it was too close to the other tube and slightly skewed from its proper axis. Since the tubes were not perfectly aligned, a rubber mallet was needed to place those final sections. There is a There are not small extension tube pieces available for purchase in order to separate the bikes from each other, when a mount for two bikes is all you need and you want to put the rack into the back. I want to do that. The 3-bike version is too wide for my vehicle. The 2-bike rack + extenders would be a perfect fit for that transport application if there were extender tubes available.

👤I needed a 3-bike rack to hold my bikes in my small yard shed. The bars are of high quality and the dimensions were true to size. It's easy to put together and install. It slid under the brackets as I slid in bikes because it was installed on soft rubber. I secured the 2 brackets with instructions on the left and right. I wrote to the seller of Loveliness-US and asked if I could purchase additional brackets to keep it in place. They responded quickly and sent me 2 more brackets. It doesn't move anymore. I was looking for a very affordable and high quality product. I think it's a good idea to recommend 100%. Mandi is in Washington DC.

👤It is reasonably priced. It is easy to assemble. It is stable enough. If I used the included brackets to attach it to the floor it would be impossible to move. The bikes are close together. Not a dealbreaker. It is possible for the brake cable from one bike to be caught by the handlebars of the other bike. When putting a bike in or out of a rack, pay attention.

7. Bikehand Bicycle Floor Parking Storage

Bikehand Bicycle Floor Parking Storage

The safe locking mechanism prevents accidental release. No one wants to find their bike on the floor when they come home. The free standing floor stand is great when you still need the flexibility to move your bike around, whether it is in your garage, bike store or at a race. A patent design has been awarded. The pulleys have a position. It fits any bike with a wheel size from 24 to 29". It's just a simple slide in. The max tire width is 2.4 inch 60mm. The front or rear wheel slides in. To make the bike stable, you have to sit in firmly. This rack is great for high end bikes. It does not bring scratches to the bike's frames, disc rotors, cassettes, etc. The package has 2 bike holders. The required assembly tool is included. A steel frame with a rubber base. It's perfect for cement or timber floor. A life time warranty on top quality. It was made in Taiwan. The product weight is 1.96 kilograms. 4.35 lbs.

Brand: Bike Hand

👤There is an update. I was sent 2 more stands and they were the same problem, wobbly and with unevenly or warped bars. I was able to get 2 stands that are at least acceptable after spending 4 hours mixing and matching pieces from all 4 stands. I had to spend a lot of time putting together and taking apart the stands and still wasn't able to get what I wanted. The tack welded on the backs of the curved bottom tubes is slightly slanted so it won't sit flat if you put the legs on. The design is a good one, but they cheap out and won't do quality control to make sure it's good. They could easily fix the problem by doing a partial assemble using a jig and tack welding the nuts on the back. It would solve the problems. If the stands were made correctly, I would pay a little more. Maybe this company should think about something. There is a The design of the bike rack is amazing. They came up with a great design. It holds your bike very securely. I ordered 2 of them and both had problems with the parts. A warped metal tube causes the bike rack to not sit flat, it has a lot of wobble to it, not exactly what you want holding your 3K bike. One of the hand nuts can't tighten the top rounded tube. I tried it on both sides and it can't tighten, where the 2nd hand nut does tighten easily on either side, so something is wrong with the 1 hand nut. Assembly is easy and straight forward, but I have to take them both apart and send them back, and hopefully they'll send out 2 more with unwarped tubes and parts that aren't broken. We will get to see how good the customer service is. I will come back with an update.

👤I have had them for a while. I like them. I built a shelf for our garage from the four I purchased. The shelf is free standing with legs and is about 24 inches tall. This allows the bikes front wheels to be elevated, in turn pulling the rear wheel in and saving floor space. The four bikes are parallel to each other but not on the wall, because I mounted them at a 15 degree angle. The rear wheels are saved space by this. I was worried that they wouldn't work on a table top, but they did. I used electrical conduit to hold the rack onto the wooden shelf top. They would work well mounted at ground level. These are easy to load a bike into. The bikes can be loaded into the holders. The rollers are important. My family's four bikes are not interchangeable between the four racks because you want to adjust to the individual bike. The rollers are plastic and not heavy rubber like I was expecting, but after using them for several months I see no problem with that.

8. Bikehand Floor Parking Storage Bicycle

Bikehand Floor Parking Storage Bicycle

ChainBrite Chain and Component Cleaning fluid is plant-based and will not harm plastic, rubber or carbon fiber. Patented simple push in design is easy to use. You need to lift the bike and put it in the stand. When you push the bike into the rack, the front holder will tilt. Heavy bikes such as downhill, mountain and beach bikes will be perfect for this design. The most stable bike stand has three points on the tires, which is better than other stands which only have one or two points on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel stays in the holdder because it's deeper than others. The dynamic stand base makes it impossible to tilt the bike if you push hard. It is possible to fold the stand into a flat shape within a second with a simple one-pull-knife. Your bikes will not be lying on the ground anymore. The steel is heat treated and has a fantastic powder coated finish. If used correctly, this stand will last forever. All bikes are compatible. The bike stand will fit almost all bikes, but only those with the tires more than 2.4" in width. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.

Brand: Bike Hand

👤After years of leaning my bike against the wall, some serious smudges had developed. I bought this to store my bicycle upright, but not against the wall. There is a It works, but not well. The rack is too light to support my bike with my panniers, and it doesn't have enough weight to stay in place as I attempt to roll my front wheel into the well. When I try to put my bike in it, the rack scoots away, and unless I'm very careful, it leans into the wall. There is a I recommend the procedure if you've purchased this. To orient the rack, drag it away from the wall. 2. Use your foot to tilt the mechanism. Roll your front wheel into the slot and secure the rack with your foot. 4. Lift the back of your bicycle and orient it straight behind so that it has the best chance of standing up. 5. If you have a weight on your bike, you should turn your front wheel and rack towards the weight so that you can form a triangle with the ground. There is a How to remove the bicycle from the rack? I haven't found a way to keep the rack in place. There is a It seems like the greatest improvement would be to weight the base of the rack so that it's more stable.

👤I was afraid that my road bike wouldn't be stable in this storage stand. There is nothing to worry about. It keeps the bike stable and holds the skinny tires. It was well designed. Excellent product.

👤I was tired of putting my expensive road bike up against the wall and hoping it wouldn't fall over, and also scratching up the walls and possibly the bike. I wanted to keep it standing up without having to lean it against a wall. I agreed after reading a post that said your expensive bike deserves a quality bike stand. I initially ordered a different stand. It was $5 cheaper than this one. The one that popped up on my screen had an extra component that they call the "push-in simple design and the wheel sits deeper." I ordered it from Bikehand after I saw that it had a lifetime warranty. The stand works well and the wheel slides in so the bike stays up. The bike has 700c x 23mm tires and works as advertised.

👤I bought a bike stand to help organize my garage and not have a bike leaning on it. My bike does not take a kickstand very well. I needed something to keep it upright. The rear section of my bike is very heavy and this stand balances it very well. The stand stays planted even if the bike is moved or worked on. The bike I have weighs a good deal. The stand was worth every penny if it could keep my bike up. It collapses when you don't use it.

👤The stands seem to be well made. The manufacturer has no fault in the fact that they tend to move when you push the bikes into them. You can use your foot to support them. The stands shift when the bikes are taken off the stand. I thought about it and did the following. I thought I could use the wall to keep the bikes from shifting. 1. I bought a plank of 8 feet. 2. I parked my car at the wheel parking stop. It's 6 feet long and is sold on Amazon. 3. The lumber was cut to 6 feet so that it would be the same length as the stop. 4. I bought a lot of deck screws. 5. I drilled small holes in the parking stands and then moved up to a bit to fit the deck screws. 6. I marked off the wood plank where the stands would be installed. 7. I made small holes so the screws wouldn't split the wood. There are 8. I took a battery powered driver and drilled them through the plank. Don't overtighten. The stands are secure. No shifting at all.

9. CyclingDeal Bicycle Floor Parking Stand

CyclingDeal Bicycle Floor Parking Stand

The rigid design of the rock solid base allows a secure base for awkward cycles. STABLE: The bike floor rack has been changed. The two holding plates with tire grooves are at an optimal holding angle. The feature ensures bikes are held in the stands. You need to fit 6 bikes in the stand if you put your bikes in different directions. One front and one back wheel. If there is large space, the bikes could be inserted from both sides. Strong. The stand is made of high quality steel. The black finish is powder coated. It is best to use indoors. The front and back plates hold the up holder. The bike holding stability will be affected by the wide holder. The bike stand holders are linked together so it is easier to use. Please watch the video in the listing. COMPATIBILITY: The rack is designed for all wheel size bikes, from the smallest to the largest. The tire width is 2.5. The back of the bikes should be inserted into the hold so that they sit in the front. The bike rack could not be touched by the disc rotor. The bike stand holders may be touched by bike hubs. You can order now and pay free. They can provide a 5-year warranty on their product.

Brand: Cyclingdeal

👤This product is very good. It's heavy, stable, and holds our mountain bikes securely. The video instructions have a bunch of bullocks. If you have two people and are a zen monk, you should not follow those instructions. It looks simple, but only on the video. If you follow them as recorded, you'll end up throwing it away or out your window, which could be fatal for a poor old lady trying to walk her Yorkshire terrier. Poor little Yorkie. To make this easy, build each stand as a separate stand and snap them together. It will be easier to keep everything lined up if you screw in the bolts that hold the sides of the tire holder. I wish someone had told me that before I tried to follow those directions. Maybe my neighbor Yorkie would be a good mother. There is a This is a quality stand and really worth the money we spent on it. It's long enough to fit all of our bikes and holds up when there's only one on the end. I gave this 5 stars, but I removed one at my physicist's request. If you get this stand, you will not be disappointed. Remember the dead.

👤It works great for our bikes. There are three adult bikes and three kids bikes. You have to take your time putting the bikes in. Each child can do it. It helps organize our garage. We preferred this over hanging. How could our kids not get hurt? They couldn't. The hanging or wall ones are great for older teens and adults.

👤We've been tripping over bikes for a long time and this solved the problem after half an hour of assembly. I didn't watch the video and the drawings were not good. If you've ever put together anything from ikea, you can handle this. It's a good thing. It's nothing fancy, but it does the job it's designed to do very well. We needed to put some in front wheel and some in rear wheel first. The bikes fit that simple modification.

👤It is easy to put together, but not level. It works fine for what we need.

👤It's easy to put together. I bought a bike stand. I had to assemble about 15 minutes. I had read that it was difficult to assemble and instructions were poor. I found it easy to assemble the instructions for these people as they are not capable of putting gas in their vehicle. I get a kick out of people bashing a product when it is their lack of ability that is the problem. If you need a nice bike rack at a cheap price, this will suffice.

10. Bicycle Parking Storage Indoor Outdoor

Bicycle Parking Storage Indoor Outdoor

You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality. The bike rack will hold the whole wheel from the back to the front. The wheel is in the holder. It's a very stable floor rack, it's perfect for most bike. Storage space should be saved when not used or used in the car. Lie your bike on the ground. The bike stand is easy to assemble. The tire width is 2.4. The tire width is 2.4.

Brand: N\c

👤Not even close to being able to fit the narrow tires on my bike in this stand. It was useless.

👤I like it. It is easy to put my bike on it.

11. Qualward Bicycle Vertical Adjustable Upright

Qualward Bicycle Vertical Adjustable Upright

Attach the U pipes to the base first, then attach the bent pipes to it. You can assemble the bicycle rack by yourself. The Vertical cycling floor stand is a great place to store a bike with the tires less than 2.4" in width. PDF instructions are included. The height of the bike stand can be adjusted. Adapts to different heights of bikes. The vertical rod adjusts the support position so that it doesn't get stuck on the bicycle. Floor space saving is a great solution for limited indoor space and can be stored in corridors, balconies, warehouses, tool rooms or other places. Don't need drilling, no damaging walls or ceilings, it's easy to assembly. There is no scratching on the bicycles. Store your bicycle quickly and easily with the included screws and anchors.

Brand: Qualward

👤Assembly is difficult for anyone. I have questions. The A and B models are available. The B model comes with a metal floor sturdy thing, as well as a long Velcro strip, which you can use to secure your front tire when standing the bike. The bolts for the model were apparent. If you have half a brain, you can figure it out. I put this together in ten minutes. I have a huge space saver in my small apartment.

👤There was no mention of an A or B kit on the sheet. A 7/32nd allen wrench was included. Why? The wrong size allen wrench was included with the allen head screws. The allen wrench should have been larger. I have my own tools and know how to solve problems. Someone who knew what to do was the only one confused. The bicycle was put on the frame after the assembly went quickly. The design of the upright must be different between A and B. The metal brace on my upright unit was the same as the one on my ridged metal unit. The seat post is supported by a rod style instead of a rod style. The parts issue could be a problem for some buyers. The product seems to be a good solution for creating storage space with certain bicycles that are light in weight. A different style of stand is needed for bicycle that might have other accessories to make it heavy. I use the stand inside the apartment to store my bicycle.

👤I have a very light road bike that I can mount on the wall, and it is easy to assemble with instructions, wheel strap, and all the correct screws. I don't have any wall space orstuds to hang my heavier bike. This is a great option for our small apartment. I have a woman's Cannondale hybrid bike that is around 25-30 lbs with 700x35 tires.

👤This Sunday. Put it together in a few minutes. There were two washers and two screws. I am not sure why they sent them. Many people complained about not being able to assemble this, so they started sending instructions in the package. There is a video in the description, but the company clearly reads the reviews. The instructions are needed for those people. There is a It is easy to assemble. I will know how sturdy my bike is when I put it in my storage space. It will support my bike. There is a No regrets about purchasing.


What is the best product for bicycle storage stand?

Bicycle storage stand products from Bike Hand. In this article about bicycle storage stand you can see why people choose the product. Eocik and Torack are also good brands to look for when you are finding bicycle storage stand.

What are the best brands for bicycle storage stand?

Bike Hand, Eocik and Torack are some of the best brands that chosen by people for bicycle storage stand. Find the detail in this article. Begona, Sunix and Xcsource are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to