Best Bicycle Storage Hooks

Storage 8 Feb 2023 10+ Comments Open

1. Dirza Garage Hanger Storage Vertical

Dirza Garage Hanger Storage Vertical

Lifetime warranty, including 4PCS bike wall mounts, 4PCS bike rack straps, 16 x screws, and 16 x plastic expansion. They will spare no effort to make you completely satisfied. Installation is simple, no assembly is required. You can hang and detach the bike with the fixed hook. It's great for shed corner and garage storage. Accidental release can be prevented by a unique hook design. The bike hanger should be installed on the studs. The metal hook cover is thick to prevent it from scratching the bike rim. Heavy duty, the lightest of the bike hangers is 0.1", weights up to 1.25lb that ensure it won't bend, and maximum hanging weight up to 65lb. It's strong enough for a road bike. Not for fat tire bike. Good service. The bike is built to last. They are behind their product. If you don't like it, just return and they will give you a full refund.

Brand: Dirza

👤I didn't believe the reviewers that the included hardware is garbage. I hung a 2x10 board with some lag bolts and mounted it to the wood because my walls were further apart. The screw heads broke off when I used my drill to screw in the hardware. Immediately remove the hardware. It's the worst hardware I've seen. I read the reviews before hanging the mounts. It's a hassle to have to redrill new holes. The mounts are made well and seem to hold up well.

👤6 bikes were organized well. I added the racks to the plywood after following some advice. I used my own hardware. I'm not sure how it will hold up for the long term, but so far it's been good. I'm 5'3 and it was easy to hang them up, but I'm not sure if the kids will be able to manage.

👤These are well built and sturdy. I will add a fifth bike to my garage as soon as the last one is delivered. The top screw is hard to put in because the hook blocks access with a screwdriver or electric drill, according to several reviewers. I used a small head screw instead of the deck screws that were provided to drill a pilot hole into the cleat I mounted on the wall. I used a small wrench to tighten that screw. I would strongly recommend against using the provided anchors. You can screw into a stud or wooden cleat. There is a The deck screws that come in the package are cheap and made of soft metal. Better quality screws, drill pilot holes, and better quality screws will make putting these on the wall easier. If you use them to hang multiple bikes side by side, you will need to leave enough room between them to get a bike to the right when putting it up or taking it down. If you hang your bike too close to one another, you will hit it next to the one you are moving. I hang the bikes from the hangers up and down, alternating between handlebars up and down. This is definitely accessible. I love how these hangers create more floor space in my garage.

👤I have finished filling out the return. There are a couple fatal flaws in this design that made it useless. There is a The screws that come with it are not good. I tried to use them and thought they had improved after all the critical reviews. They haven't. The screws on my wall have heads that have been twisted off. There is a The place where the top screw is located is so bad that it's impossible to drive in. This is due to where the metal hanger comes out. I tried to angle the screws with my drill, then used a small hand-held screwdriver to get one in. The screw broke the head off as a result of the effort against it. That's when I ended it.

👤Hardware is junk. Even with pre-drilling, half of the screws were stripped. These are nice once mounted. It would be a 5 * product if it were better hardware. If you care, the tires will mark up the wall. There is a Installation notes: I put ours on the standard 16” studs. If the stud locations aren't ideal for you, you could strap some plywood across them. There is a Pre-drilling with a 11/64” made it easy to drive the screws in. I used #12x2” screws to sub for the ones I stripped out. If you have a chance to shop in advance, spax screws are ideal. The next size down is necessary because the holes in the hangers are just under a quarter inch. I leveled and screwed the bottom hole using a level against the top. It is the only flat surface to be looked at. The middle 2 are easy to tighten.

2. Dirza Hanger Garage Bicycle Storage

Dirza Hanger Garage Bicycle Storage

No hooks, straps, bars or other equipment is needed. Installation and mounting hardware is included. There is free up floor space. The bike rack is horizontal. It frees up garage floor space by keeping bike off the floor. It's perfect for a garage, home, orshed. Please mount on the wall. The arm is foldable. There is a foldable arm on the bike hanger. It can be folded to save space. The 888-405-7720 You don't have to worry about scratches since the bike hook covers are soft. STURDY: The weight limit for the bike holder is 38 pounds. Most of the bikes are compatible with this bike hanger. Hardware and instruction are easy to use. The bike wall mount rack is easy to install.

Brand: Dirza

👤The out of box experience for these is okay. It will work with lighter bikes. If your bike is under 30 lbs, it will be rock solid when mounted to studs. There is a My wife's bike is a tad heavier than my Giant bike. Hers looks rigid, but I angle down slightly due to being heavier. If you have a heavier bike, I recommend adding washers to the screws to stop it from going through the mount hole. A washer will help. The top half should have two screws if there is a second hold on the top below the first. Most of the weight and stress will be here. The weight of the bike will pull at the top more than the bottom. The single bottom screw is enough for stabilization and the top should have 2 mount points. You can put all screws into a single in-line stud with the Mount holes over the other. There is a It's possible to mount your bikes on the wall side by side or one over the other, and it's also possible to put them on the garage floor. Measure the distance from the base of the mount to the end of the hooks. Measure the distance of your bike's top tube to the outside of the pedal. If you add the two numbers together, you can figure out how far your bike will protrude from the wall. This is to make sure you don't hit it with your car when you pull into the garage. There is a If it's at Mid-height, your pedals or handle bar may hit your side-view mirrors.

👤I bought these to save space in the garage and get the bikes off the floor, but realized that it was difficult to lift the bikes up onto the rack. I am a very small person and that was a challenge I didn't think of. The bike racks are exactly what they are advertised to be. If you are hanging one bike above another, the top one has to be very high. I thought of mounting the bikes on a wall, but it wasn't going to save any room next to the car. I got the rope/pulley kind of bike rack with hooks that go under the seat and the handlebars, instead of these. It is easier for me to pull the rope to lift the bike up from the floor to the ceiling than it is to lift it by hand. I write honest reviews to help others make better decisions because I read reviews myself. I hope my review helped you.

👤Great value! When I first opened the box, I wasn't sure about the strength of it, but after assembling it, I'm convinced it's the best value for money. I don't think there will be a need for a different mount down the road. It folds up when the mount is not being used. The installation was straight forward. The wall needs a 10mm sockets to drive the screws into. You cannot use a drill with a drill bit to screw on a stud. It would have been better if it was a torx screw. Most households should have a 10mm sockets, it is a very minor issue. If you drill a pilot hole, your installation will be much easier. There is a For this price, you get two hanger, not one. If I was looking for another bike accessory, I wouldn't look at other ones.

3. 2004 Cycle Products Bike Hoist

2004 Cycle Products Bike Hoist

The bike cell phone holder can be attached or removed from any size of handlebars. Just put it on a wristwatch. The rubber coated hooks are designed to protect your bike from scratches. It's easy to install, you just need to mount to your ceiling joist or rafter. You can have your kayak hanging in your garage with the minimum of tools. Heavy products can be lifted up to 100lb. There is capacity. The bicycle hoist is the one the other are trying to copy. They do not cut corners. You've heard of the original RAD Bike hoist. Indoor ceilings can be up to 12 feet high. You won't know what to do with all the floor space once the bike is out of the way. The safe locking mechanism prevents accidental release. No one wants to find their bike on the floor when they come home.

Brand: Rad Cycle Products

👤The directions were easy to follow. The other reviews were helpful. Here are my thoughts for you. 1. The pulleys should be mounted on a 2x4 or a 2x6 Most places will cut in half for you if you don't have a saw, if you get a 10 footer at a hardware store. You can throw the screws in the trash. You will strip them before they are put into the wood. Pick up your wood and get some deck screws. The 2x4 or 2x6 sections should be mounted with lag bolts and washers. 3. Before you mount it on the ceiling, you need to run the lines through the hooks and pulleys. Before you mount it to the 2x4 or 2x6 you need to tie the knot in the front brackets. I had to do it before I realized it would be easier. 4. The nylon line is long. If you can get a foot or two, you can pull the bike up and cut the rest off. You can melt the end of the line by using a lighter. 5. I did not need to bend my hooks. Measure the distance between your handlebars and the back of your seat as instructed and you will be fine. I can swing my bikes while they are on the ground. 6. I could see myself replacing the lines after a few years since the line brake works great. 7. My mother in law had no problems raising and lowering the bikes.

👤I got rid of the cheap rope and used 175# paracord. Paracord loops and 300# carabiner-style clips were used to secure bikes. The included screws are cheap, and the mounted hardware was painted 2x4x48" (std 8' stud cut in half). The assembly was attached to the ceiling joists with lag bolts and washers. Pre-drilled holes were used to prevent cracking, binding or stripping. There is a It's safe, strong and not unattractive. It's easy to operate. The 6' podium ladder was an absolute nesessity.

👤Think before you buy. The unit is functional and can be installed by anyone with basic tools and a stud sensor. The fit and finish are good, not exceptional, but more than adequate for the purpose. There is a I waited and got a set from the Amazon Warehouse deals as a damaged box for 1/2 the price, but the price was just OK. The units were perfect. I think it's a great deal at 1/2. If you are really going to save any space, you should consider what you are actually doing. My bikes are 38 inches from the ground to the suggested location on the lift. The hooks are about 12 inches. This is 50 inches down from the ceiling. If you mount the bike as suggested in the instructions, you will be banging your head into the tires every time you walk under it, unless you have a 10 foot high ceiling. I used the 2x4 mount and pulled the bike up as high as possible but the tires were not eye level and were a danger. There is a If you loosen the bolts on the hooks and retighten them, you can put the hooks on the tires/rims and raise the bike the whole way to the ceiling. You can use a bungee cord to keep the wheels parallel during the lift. The 2x4 method will give you an additional 1 1/2 inch clearance, but flush mounting the plates to the ceiling will give you an additional 1 1/2 inch clearance. My tires are now 6 feet off the ground in my 9 foot 9 inch ceiling garage. To get the overhead "obstacle" out of the way, you probably want to mount the unit against a wall. It feels weird to have bike tires over your head when you get out of a car. I'll put a photo in the user photo section if I can figure it out.

4. ZPARIK Storage Adjustable Bicycle Apartment

ZPARIK Storage Adjustable Bicycle Apartment

The package has a bicycle wall hanger, 8 screws, and an Allen wrench. The details of the product may be slightly changed with the improvement of the product. Saves space. When using a bicycle wall mount, put the beam down and put the bike on it. The hook can be folded up when not in use. It works well in your home and more. The hook length can be adjusted to fit the distance between the bicycle and the wall. The length of their bicycle rack before and after adjustment is 13 and 17 inches, respectively. It holds bikes up to 30KG. The hook can fit for all types of bicycles by adjusting the screw and keeping the bike level, like mountain bikes, road bikes etc. The arm of the wall mount bicycle hanger has a rubber cover to protect against bike paint damage. The sturdy and durable construction is designed to protect you bike better by holding the bike frame instead of the rim. Installation tips include attaching the hanger to the wall with anchors. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. Installation tips include attaching the hanger to the wall with anchors. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall.

Brand: Zparik

👤It is a good option. I'm not giving 5 stars because they don't send proper screws. They need to send screws for concrete and drywalls. I had to attach a piece of plywood to the stud first in order to fit the base over it because it is larger than a stud. Some people put in the comment to place it in an angle so one role on the top of one side and one on the bottom of the other side would be screwed to the stud, but this awkward set up would bug me forever.

👤The stud is wide to mount on, and the clamps for the bike don't tighten enough.

👤Unless you want the pain of your bike scratched, don't buy. The metal washers on the edge of the unit are designed to touch the frame if you scratch it. I am very upset that my bike frame was scratched by using this garbage.

5. Gootus Bicycle Storage Horizontal Adjustable

Gootus Bicycle Storage Horizontal Adjustable

Session Bike is a company that is driving innovations to add value to their customers lives. If you are unhappy with their bike hangers, please get in touch with them and their customer service team will get to work on it immediately. Click here to add to cart. Hang and store your bicycle horizontally, which is convenient for storage and disassemble. The angle and length of the bicycle storage rack can be adjusted to fit different bicycle rack angles and shapes. The bike wall mount is made of heavy-duty thick steel and has a load-bearing capacity of up to 66 pounds. It is suitable for all types of bicycles. The bicycle rack has arms that can be adjusted. Put the beam on the bicycle when you use it. It can fold the brackets to save floor space, which is very suitable for apartments, homes, garages and sheds. The bicycle hook is wrapped in a sponge, which will help protect it from being scratched, and will give you a strong, durable and sturdy bicycle wall mount kit. The garage bike rack is easy to install. It can be done with a drill bit and screwdriver. The bicycle wall mount should be placed on a strong column, beam, masonry or concrete wall. Unless there are wooden pegs behind it, don't install the bicycle hanger on a wall. Please contact them if you have any questions. The garage bike rack is easy to install. It can be done with a drill bit and screwdriver. The bicycle wall mount should be placed on a strong column, beam, masonry or concrete wall. Unless there are wooden pegs behind it, don't install the bicycle hanger on a wall. Please contact them if you have any questions.

Brand: Gootus

👤This is probably the worst product I have ever ordered. The "expansion screws" in the doc do not expand. Look at the first picture for a view of the result. I bought larger screws that didn't correct the issue. I was able to get the anchors out of the wall with needle nose pliers. The second picture shows why they came out so quickly. At the very least. The instructions in the 3rd and 4th pics don't give a clue as to why the expansion screws failed. There are some "mystery parts" that were shipped with the item. I don't know where these are referenced in the enclosed doc. I went out and bought proper anchors and installed it anyway, even though I wanted to send it back. I will never buy another product with the brand "Gootus".

👤I don't usually write reviews, but this one is well deserved. I bought this a week ago, and after three days, the expansion screws were broken, and my bike fell, because they didn't support the weight of my bike, which is up to 66 pounds. I tried to fix it, and bought more expansion screws to make it more reliable. The screw expansion broke again after three days. I wish they could pay for the repairs to my bike. Don't buy this unless you want to bike on the floor after a long period of time.

👤The design of the rack does not allow it to mount all four holes on the stud. It doesn't look like it will last long because the mounting hardware is flimsy.

👤Absolutely junk. Can't keep it from moving. Wouldn't waste your money. Would not give it any stars.

👤Likes when not in use. My gravel bike's tube is not 100% parallel to the ground, but it can be accommodated with a swivel. The anchors and screws do not grip the wall board. That is important for the top screws. I picked up thicker, better quality anchors that spread out on the inside as you screw them in.

👤This item spins on set screws and won't tighten, so when you hang your bike it falls off. Try everything possible. Garbage and angry.

👤I couldn't make the nut tight enough to keep the arm from moving. It's not going to fall apart, hung up the bikes and work well.

👤I had to fit my bike in my garage so I could keep my car inside. This was a great solution.

6. Shepherd Hardware 8091E Storage Utility

Shepherd Hardware 8091E Storage Utility

Intpro can give you the best customer experience and after-sales service. They will solve your problem within 24 hours. Buy with confidence. Heavy duty tubular steel storage hooks. The construction has non-marking tips. Hooks can hold 25 pounds or more. Mount on a studded wall with screws. There are many options for efficient storage in the garage, shop, basement, or shed. There are many options for efficient storage in the garage, shop, basement, or shed.

Brand: Shepherd Hardware

👤I have been setting up a garage that is easy to clean. Tools, skis, holiday decorations, and a ladder are included. I went to the big box stores to find the heavy duty brackets I wanted. At the usual locations, a pair of brackets ranged from $20 to $200. I decided to try these out for $10. It holds up a ladder well, so far I'm impressed. There is a These do not come with mounting equipment, so you will need to find wall anchors. If you can find a stud, the 2in+ screws should work, but I recommend using the brackets for any drywall installation.

👤The price was so low that I bought these with low expectations. I didn't know what the quality would be. These hooks are so cute. They are heavy and metal. They will hold up anything. We hang everything on the wall that I anchored. I put gorilla tape around the legs of my pool and it held my pool cover. Excellent tool for organizing.

👤I wanted heavy duty ladder hooks. Ladder hooks were shown in the first four styles. The last heavy duty photo had a different style hook. It's a useless hook. There is no ladder in this. Don't buy anything with out dimensions. I don't know what you can wall hang with the sturdy hangers. Maybe two hoses. They are not what is shown in the drawings. This was disappointing.

👤These things are great. The value for money is great. I put a board in my shed wall where they were needed. I didn't feel like paying that much for a slide track system. This looks great. If you want to hang a ladder with two hooks, you need to buy the 12” hooks because the 10” ones won't be long enough.

👤I have to give it two stars because of poor quality control, one of my hooks seems to be unfinished without holes drilled in it and with sharp edges. I know how to use power tools and was able to drill new holes. It was great to hang our beach equipment off the floor.

👤I was surprised when I found no screws in the package, but when I looked at the product description, I saw they didn't have any. I should have noticed. I gave them a 1-star rating for being easy to install. It's not easy to install screws at a store. They are definitely heavy-duty and versatile, so get a 4-star rating. I plan to hang my Dyson hand vacuum cleaner by its handle in the closet.

7. Heavy Duty Bike Hook Perfect

Heavy Duty Bike Hook Perfect

The bike fixed hook is an ideal choice. The bike wall racks are a great solution for storing your bikes. If you are looking for a sturdy and efficient bike rack, then this Gootus bicycle wall mount is what you want. They will be happy to help you if you have any questions. The length of the hook is 6.2 inches. There are 4 hooks in a pack. The Bike Hook/Bike Rack is suitable for storage, garage, storeroom, tool room, gardens or just on a bike. These hooks maximize space in your home, apartment, garage, basement, tool shop. It is an assistant tool with a wide-mouth that helps you in the open air. Premium galvanized A3 steel with a soft matt plastic coating, non-slip, is the high quality material of the bike holder. The Bike Hook is superior in quality and has good resistance to oil and rust. The bike hangers can hold up to 100 lbs. It's easy to install. It is easy to install. To make sure the hook stays secure, install the bike wall mounts in a stud/wood wall. 100% SATISFIED SERVICE. Enjoy yourself, any Dissatisfaction can beRefunded or Replacement,Totally Risk Free. Why not try it out? Just buy with confidence. There is a 30 day money-back guarantee on the heavy bike hooks. If you have any suggestions or problems with their products, please contact them. 100% SATISFIED SERVICE. Enjoy yourself, any Dissatisfaction can beRefunded or Replacement,Totally Risk Free. Why not try it out? Just buy with confidence. There is a 30 day money-back guarantee on the heavy bike hooks. If you have any suggestions or problems with their products, please contact them.

Brand: Mcigicm

👤I wanted to get my roof rack off, but I didn't want to put it up against the wall. I wanted it out of the way. These work well to keep it out of the way. My husband said that they were easy to install and that it was a great use for getting the roof rack out of the way.

👤Garden tools that aren't compatible with other holders should be hung up. I don't own a bike, but I find these useful.

👤The kids BMX bike can be hung from the ceiling of the garage. The rubber coasted to protect the rim and wide enough for it to sit right.

👤It's easy to install. I like to predrill some holes slightly smaller than the diameter of the hook "screw" to make it easier to install. I can usually screw in by hand from there. Make sure you put something solid in place to support the weight hanging from the hook. I wanted the hooks to hang my bike. 2 of the hooks were used to serve the purpose.

👤The hooks are strong and nice to hold, but you need to drill a guide hole for the hook since it doesn't bite into the wood.

👤I used to have these on my garage ceiling. We decided to get rid of the bikes. We use them to hang our kayaks. Work well. It's perfect size for this kind of thing.

👤The product was well executed. The bike is easy to hang from the rafters.

👤I wouldn't consider them to be heavy duty. I bought these to use in my basement for bike storage, but after receiving them, they will only be used for my lightest bikes. I was expecting more than that.

8. Tetra Teknica UH03 6P Garage Storage Utility

Tetra Teknica UH03 6P Garage Storage Utility

Installation is easy with the StoutMax EZ-Thread. A metal structure can hold up to 25 pounds. screws are not included, so it's not possible to mount on hardwood, stud walls, block or brick with screws. There is a powder coating with rubber tips. A cost effective way to organize garage, storage, basement, shed and etc. The inside is 4.25 inch long and the tube is 0.25 inch. The inside is 4.25 inch long and the tube is 0.25 inch.

Brand: Tetra-teknica

👤I needed wide hooks with a lip to hold multiple purses, some with wider handles, without having the purses fall off. My husband made a pole with a hook that I can use to add or remove purses from the hooks in our closet above the door. I don't need any more purses, and being able to see all of them at once reminds me that.

👤The hooks are a little smaller than I thought, but they are perfect. I hung my snow shovels from the six mounted on a 1x4x8 The red caps are not glue on and may come off, but other than that they are an excellent buy.

👤Poor lawyer. There are 6 hooks and 4 different spacings.

👤These are not very good. The first one I took from the package was not close to the wall. The red end caps were easy to remove. I returned them because I wanted a higher quality option.

👤To avoid cracking, be sure to pre-drill some undersize holes and drill at least 2 inches away from the top or bottom of the wood. Number 10 wood screws are fine. I wouldn't change the size even if it was longer. Bikes need width on both sides, so it's not a good idea to install directly on a wall.

👤You don't know until they're in your hands, they looked like they might do the trick, but you just don't know until they're in your hands. I'm glad I took a chance on these. I use mine on a boat to hold up the control cables out of view. They will do well. The paper thin paint edges are already starting to oxidize. I just gave them a coat of Rustoleum Black S/Gloss and I'm keeping mine. They'll do okay. Not at all near salt.

👤I like organizing my electric cords. I ordered two sets of these and shared them with my daughter. I have electric cords from 25 feet to 100 feet. I have tried many methods over the years and just wanted simplicity. I don't worry about how I wind the cord to throw on the hook because this seems to do it. I used the last one for a garden hose. I may order another set of these hooks.

👤I wouldn't want to put too much on these for hanging light equipment in a shed or garage. These are a good hook for extension cords, but not much else. The metal tubing is very thin and the red plastic end caps are loose and have already been cut by the metal tube. I will replace them with something better in the future.

9. AIYoo Bicycle Storage Utility Hangers

AIYoo Bicycle Storage Utility Hangers

The bike hooks are perfect for all bike types, including road, mountain, hybrid, BMX, cross, trials, fitness and kids bicycles. The bike hooks are made from heavy-duty durable galvanized steel and PVC coated with a soft non-marring, non-slip coating to protect surfaces. It's strong and durable and can be used anywhere in your house, including your kitchen, bathroom, garage, hallway, garden shed and more. It is easy to install their bike wall mounts if you use a stud/wood wall. If you drill a small pilot hole, you can get away with just fixing them in the ceiling, they will only work if you fix them in the wall. It's perfect for use as storage hooks for garage or bikes. It's ideal to use for ceiling storage wall hanging of bicycles, power equipment, furniture, tools, and hoses, in the garage, home, apartment or wherever you store your items. It works well for cement walls with expansion screws. Their bike hooks have a unique design that makes it easy to store. A vertical bike holder set-up is more cost-effective than a traditional bike rack. It's easy to fit,handy size. 6 red bike hooks are included in the package. The hook and screw part lengths are the same. The maximum diameter of the bike's wheel should be no more than 5 cm. You can trim back the PVC if it splits the coating. The bicycle hooks are not great for heavier bike weights. You should use 2 bike hooks for holding an adult bike.

Brand: Aiyoo

👤The hooks are small and the threads are poor. Cheap Chinese made. I tried many times to get the things to bite into the wood, but they wouldn't. Finally went to Harbor freight and bought some that didn't fit in. These are only made to be used with plastic anchors and not directly into wood. Beware!

👤See the pictures. They lightly welded a screw to a U shaped tube and hoped for the best. The purpose of the U-hooks that didn't break was intended, but when 2 out of 6 break during installation, that's a low value proposition and a frustrating installation process. I drilled a small pilot hole into the stud I was going into. They snapped when twisting in.

👤I bought these to hang up my bikes. My plan was to put the hooks in the rafters. The hooks are not heavy enough for that. They were starting to bend. This was a custom cruiser so it's heavier than a road bike. I could use the hooks with other things.

👤The hooks provided with the anchors were disappointing. I drilled the holes in the ceiling. I twisted the bike hooks into the holes. The anchors wouldn't hold the hook. I twisted a hook into the anchor in my hand. The anchor in my hand is made from cheap plastic. The hooks seem to be of good quality. I will not know until I get a set of decent anchors.

👤It is suitable for hanging cotton balls. The U is shrink-wrapped to a screw and snapped in two. Junk.

👤These hold a bit. I have used them for things with some weight. I don't think it's a good idea to put anything heavier than 50 lbs on one hook. In that case, I would use two.

👤The hooks won't screw into wood even with pilot holes drilled. The threads are broken. I am going back. I bought these grey hooks and they work perfectly.

👤The red hooks are really striking. They arrived quickly and in good condition. These are good for storing things. I hang my purses and jewelry with them.

👤These hooks are the best example of the overused sentiment, as they are poorly built but still useful. This set of six costs what a quality built similar hook would cost at your local hardware store. If you are just hanging kids bikes or something light like garden tools. These will work. I wouldn't want anything with a lot of weight. There is a The screws are not great and the anchor are not great. I had a warp and drop that was attached to the bike. The bike fell off the wall after the hook almost completely "straightened out" and it was not heavy.

10. TORACK Storage Vertical Bicycles Space Saving

TORACK Storage Vertical Bicycles Space Saving

If you are not satisfied with the product you received, please contact them to help you return or exchange it. A bike rack garage is a great solution for your garage organization. The finish rails and sleeves hooks are coated with a powder. The bike storage solutions are CONVENIENT. It's easy to organize and clean your garage with bike racks. The bike racks are mounted on the wall. MULTI-SIZE BIKE HANGER- Hang up fat bike tires. It's suitable for mountain bikes, road bikes, folding bikes, adult bikes, and kids bikes. The hook spacing needs to be adjusted. The snap-hook design makes it easy to snap on the rail. The rail interlock design can combine rails. Stable snap hooks make hanging up and taking down your bike easy. It is safe. There are rails and sleeves coated with rubber. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction is used for safety loading. GS is certified. Some customers don't know how to use expansion screws, which causes the hooks to fall off. Please use a drill bit. As thick as the screw. You can learn how to use expansion screws on the video site. If you want to fix the wood, please use only screws. Some customers don't know how to use expansion screws, which causes the hooks to fall off. Please use a drill bit. As thick as the screw. You can learn how to use expansion screws on the video site. If you want to fix the wood, please use only screws.

Brand: Torack

👤I can fit my four bikes with enough space.

11. Delta Cycle Leonardo Storage Vertical

Delta Cycle Leonardo Storage Vertical

Good service. The bike is built to last. They are behind their product. If you don't like it, just return and they will give you a full refund. The Space Saving Bike Wall Mount securely stores any bicycle up to 40 lbs off the floor. The Leonardo bike rack garage has a hook shape that makes it easy to access bikes. Your next ride is close by. Installation is easy with these bike hooks for garage wall. The peel-and-stick rear tire tray protects your walls. The contemporary design of the anti scratch coated hooks has a rubber coated bike hook. The bike hanger hooks are available in either a premium silver or black powdercoat finish and look great in any room. Over 1 million cyclists trust their bike's in Leonardo vertical bike racks. For over 30 years, Delta has been a leader in bike storage. The A+ customer experience was designed and engineered in the US.

Brand: Delta Cycle & Home

👤These were easy to mount. We used a piece of 1x6 Poplar and created our own steampunk style bar for the rear tire, instead of using the stick on the rear tire mount. They look great in our office.

👤The hook on this rack is so heavy that it's hard to slide your bike onto it. It takes a lot of spinning to properly orient the bicycle because the red padding slides down. The red padding is becoming difficult to use after a few months of use. The mess around the hook has resulted in a lot of scratches on my wall. I bought a second bike with a straighter hook last month and it's way easier and more efficient than the first one. The new hook is so annoying that we fight over it.

👤It is very easy to install a power drill and stud finder. It's not much to say. My son installed it himself. The package had to be opened before the bike could be hung. If it fails, I will update the review, otherwise 5 stars! There is a Dead simple instructions: 1) find wood studs 2) mark where the front tire will touch the wall 3) measure 12 inches above that mark, 4) drill a pilot hole in mark above, 5) line up the rack

👤It does not fit for mountain bikes. The wheel does not sit in the base when the hook is locked around the rim. The tire rubs on the base's side loops when the wheel is towards the top. The base should be centered on the wheel. There is a I bent it to make it fit. Vice grips and a pipe wrench were used.

👤I own a carbon fiber Trek bike. Our apartment doesn't have any building storage so I had to put it in my bedroom. I settled on the $9.78 Delta Cycle Leonardo bike rack. This is a total life saver space saver and I couldn't be more pleased. There is a The bike is mounted between my closet doors and wall shelving, which is about 8 inches of space. To keep the wall from showing the tire scuffing, I used a black vinyl strip and a Mr Clean magic eraser, but any wall paper can be used. No anchors are included in the kit. You should buy a pair of sturdy anchors. The weight limit for the Delta mount is 40 lbs / 18 kilo, so keep that in mind when shopping for a bike rack. There is a I hope it holds up, I couldn't be happier with this!

👤The first one we bought was fast but the packaging was torn apart and the items were thrown into the bag. We attached the rack to a concrete wall with Tapcon screws because it had no scratches or broken pieces and was holding up well. There is a The second order came on time, packaged neatly, a few scratches but no serious damage, and came with the screws, but the screws are the weak type almost like plastic. If you want to avoid having to do everything over again, you should toss them and get a few sturdy tapcon screws. There is a There is an edit. One in March 2020 and the other in June 2020. Both are holding up well. If it's placed with a lot of pressure on the edge of the front tire, it will deflate it. Great rack, still. Would still recommend.


What is the best product for bicycle storage hooks?

Bicycle storage hooks products from Dirza. In this article about bicycle storage hooks you can see why people choose the product. Dirza and Rad Cycle Products are also good brands to look for when you are finding bicycle storage hooks.

What are the best brands for bicycle storage hooks?

Dirza, Dirza and Rad Cycle Products are some of the best brands that chosen by people for bicycle storage hooks. Find the detail in this article. Zparik, Gootus and Shepherd Hardware are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to