Best Bicycle Stand Repair

Stand 6 Dec 2022 10+ Comments Open

1. CYCLESPEED Mechanics Adjustable Extensible Maintenance

CYCLESPEED Mechanics Adjustable Extensible Maintenance

PREMIUM RUGGED FRAME Premium steel tubing is used in this pro bike repair stand. It can carry up to 85 lbs. The heavy-duty structure and Triangular protective pads at the bottom ensure that the bike is strong enough to support repair and clean. It's foldable and saves space. The bike maintenance work stand is foldable. The portable bike repair stand can be put in the boot of your car for a race or stored in a corner when not in use. It is easy to use. HEIGHT ADJUSTABLE The height of the bike repair stand can be adjusted from 36” to 59” smoothly so that you don't have to bend or crouching down to fix your bike. The Bike Repair Stand has a 360-degree clip that allows it to be held in any position. It protects your bicycle's paint very well because it has rubber material. There is a 90-day money-back policy for the convenience and warranty service. CYCLESPEED Bike Stand is a stable way to hold nearly any bicycle for adjustments, cleaning, and repair. The CYCLESPEED bike repair stand is a great upgrade for your shop. The after-sale service at their bike repair stand is reliable. Feel free to contact them if you have any questions.

Brand: Cyclespeed

👤The Feedback Sports is clearly designed, but not the same as a long shot. Similar to collapsible tripod legs, range of angles and swivels. It's smaller than the FS because it has a shorter arm and less room for pedals to move. Not an issue yet with my bike. I'm not sure if it will last long because it's made with more plastic parts than the steel and alloy parts on the stand. The simple threaded clamp should hold up okay, but it lacks the nifty quick release engagement on the stand. It weighs less due to the larger amount of plastic and smaller size. It's quite portable but leaves me questioning theDurability. We'll see. This is the second stand I bought to keep at my inlaws' home. It should serve this purpose for the price.

👤I need this to work on my bike. My bike is hard to ride. If I take off the battery that knocks off about 12 pounds, it will hold up. It works. It does not hold it firmly.

👤I have a 50 pound ebike. I left the bike in the stand for a few days and there were no issues. The stand is lightweight and easy to fold. I'm really happy with the cost and ability to maintain my ebike.

👤The stand is stable. When in the stand, you can alternate between working on the drive side and non drive side of the bike, but the problem is the clamp. Seatposts that are not round and thin will not be held by it. There are no seatposts or shape ones. There is a The post or tube is being held against hard plastic because the clamp does not have padding. The biggest problem with seatposts is that they can slip out of the seatpost holder's grasp. The bike can come out if the wheel is tightened enough. The angle of the bike is difficult to be adjusted because of the tightening wheel. I returned the stand and bought another one that was much better, with a big, padded clamp with cam locks for both the jaws and angle of elevation. I can't recommend this product.

👤Says Max 85LB. It is difficult to hold up my 70lb ebike and it looks like it will break. I don't use this for my bike anymore.

👤If you work on your bikes occasionally and want a stand that is easy to collapse and fold up when not in use, this is a good option. I have used it for an electric cargo bike and it holds up. I feel like that is the limit of what it can handle. The arm that holds the bike is short, so sometimes the pedals will hit the post when you spin them. If the arm extended another inch or two, it would be nice to avoid this. The stand is a good value.

2. Clothink Adjustable Maintenance Workstand Mountain

Clothink Adjustable Maintenance Workstand Mountain

The weight is 436g and the length is 400mm. The length is adjusted. The height of the bike repair stand can be adjusted. From 8.7 to 18.1 is the flexable width. It can be used in different ways. The bike can be held in any angle, thanks to theAdjustable Clamp. It is possible to protect your bike frame with a certain type of material. Multi-functional You can use the jaw on this stand to fix almost any bike, from a kid balance bike to a pro mountain bike, because the tubes can be from 30mm to 75mm. Save space. You should wash your bike. Make bike maintenance a priority. In store 4. Storage in the house or garage. The mounting flange is made of steel and plastic and has 4 holes. You can make a bike repair area in your home or garage by installing the fixed-clamp stand. This mount can hold up to 20 lbs.

Brand: Clothink

👤Very slippy. I could hold my bike statically. If you do any work on the bike, it twisted and slipped out of position. I couldn't tighten the knobs enough to hold it in place.

👤The welds are junk. I welded the base to the base but it broke and I hung my bike in the jaws. The welds are pulling away from the base. I'm not the only one who had this issue. If you want quality, buy it and get the park.

👤The seat post or top-tube is difficult to manipulate. The plastic knobs are not easy to tighten. I have a bike holder that uses a butterfly nut and a lever clamp and it's a lot easier to use. If you don't have the bike balanced correctly, it's not always easy. The whole thing was caused to rotate by taking one of the wheels off.

👤The bike stand works well for me. I use it frequently and installed it in the garage. It has been of solid construction and durable so far. Time will tell. It is a good deal for the price and convenience.

👤Quality control and the hassle made it one star. There is a weld between the steel mounting plate and steel riser bar. Hopefully the company will make good and send me a replacement unit. I will report back with the results.

👤It works great with a stable base to attach it to my weight rack. It's better to work on a bike in a stand. This is cheap and works well, but don't expect it to hold a bike as securely as a more expensive stand from Park-Tool or the like. It's good for the bike mechanic.

👤I put it on my work table in the garage. It's definitely a great price point. Would recommend!

👤I didn't like that someone had the right to offer this as a bike holder.

3. Mefetop Convenient Bicycle Maintenance Accessory

Mefetop Convenient Bicycle Maintenance Accessory

Ibera's 30 day Money Back Guarantee and limited two-year product warranty guarantees 100% satisfaction. COMPATIBILITY: It's compatible with wheels from 16 to 29” The front and rear hub could be mounted. 15 x 100mm and 12 x 142mm are compatible with the QR. Not for 20mm Thru Axle. It's great for the home mechanic who only uses it once or twice a year. Do not need a professional wheel stand. Quality: Excellent. The Truing stand is made of high quality steel. It has comfortable knobs for easy operation. When not in use, fold the stand for storage. The knob is easy to use. Lower and upper notch are used for fixing wheels. You can easily observe the swing condition of your rim with the ruler and thimble.

Brand: Mefetop

👤The item was assembled wrong. When I put my 700C wheel on it, I noticed it wouldn't fit. The part that had the gauge to help true the wheel was assembled upside down. I had to flip it over to fit my wheel. I noticed that the stand was very unstable and useless when I tried to true a wheel. You should spend the money and get a sturdy stand.

👤Sturdy unit. I don't like the fact that you can't adjust the small gauge. It works great for wheels with no disc brakes. Measure and find the center of the wheel if the brake disc isn't there, and mark your own center line.

👤The build quality of this device was disappointing. It should be better at this price point. There was no instruction guide. I was able to do a good job of turning my carbon wheel. You get what you pay for.

👤I am a bike mechanic. I picked this one for less than 40 because I didn't want to spend $150 on a stand. It works, so happy! It doesn't always sit flush on the table. The right pin is very loose and needs some tape to hold it. There is a I've used it to true 700C and 26" rims and no issues.

👤This is more than I expected from a wheel stand. The stand had scratches and scruple on it. I was able to ride my wheels. Plastic is the material of some of the pieces. I could see that the parts were bending.

👤It was too weak to support my bike wheel. I loosened as much as I could but was still loose. Had to buy a park tool stand.

👤The first unit was broken. The plastic fork that holds the rim was broken. I ordered another, but was skeptical. I was happy. I was able to hold my wheel.

👤There is a tool for learning. It is lightweight and durable.

👤Don't buy if you don't know how to use the stands. One indicator was loose as mine came assembled backwards. It was easy to loosen the bolts on the gauge and indicator stand. I put some locktight on to make up for the missing space that allowed one of the indicators to float freely, and now it's tight and stays where I put it. There is a I would call it a rip off if it was 10 dollars more. It would be reasonable to be 10$ less than the asking price. There is a If you want to make your life easier, you can buy a paint marker and put it on one of the indicator ends and it will mark where your lateral is out of balance.

4. ASCELY Convenient Maintenance Accessory For16 29

ASCELY Convenient Maintenance Accessory For16 29

Made from high quality steel, it has the maximum hold of 25 kilograms. Great flexibility. It's compatible with wheels from 16 to 29” The front and rear hub could be mounted. 15 x 100mm and 12 x 142mm are compatible with the QR. Not for 20mm Thru Axle. It's great for the home mechanic who only uses it once or twice a year. Do not need a professional wheel stand. Great quality. The Truing stand is made of high quality steel. It has comfortable knobs for easy operation. Light foldable: fold the stand for storage when not in use. The knob is easy to use. Lower and upper notch are used for fixing wheels. You can easily observe the swing condition of your rim with the ruler and thimble.

Brand: Ascely

👤This item is not true. The plastic arm was out of shape, the frame was large, and it didn't fit on a work surface.

👤A wheel stand is a steal. Wrong! The stand sat on a leveled surface after it arrived. It was made of flimsy material, which would explain the warping. Don't listen to me, but listen to other reviews. Don't waste time and money.

👤What I need works perfectly.

👤I was hesitant to order because of some reviews that were shaky. I did not experience any of this. I use a magnetic stand to hold the dial indicator to the side of the rim. This gives me a reference on the dial. I moved that pat until it was correct. Sometimes it is tighter on the ones across. The pat of this product should be threaded because it's like others say and should be used as a guide. I still gave 5 stars because I knew this was going in. The gauge movement is the way to go with my eyes not being as good. I bought the magnetic stand hoping the dial would work, but it didn't. The dial indicator is a lot cheaper than my search here. It holds the wheel well. I got my wheels on a bike. If I ever need two, I would buy this again. I am not the best at reviews. I tried. There is a Everyone take care.

👤The tool is not practical as it cannot be used to align the rear wheel with gears. I tried to change the positions of the hub holders, but it didn't work. Will return the package.

5. VGEBY1 Foldable Bicycle Mountain Bicycles

VGEBY1 Foldable Bicycle Mountain Bicycles

Folding Design for Space Saving The Bicycle Wheel Maintenance Truing Stand can be folded when not in use, saving space and taking up less space. If you have a problem with their stand, please contact them. The stand is made of rubber and aluminum. It's easy to use and can fold flat. The bike stand is waterproof and strong and is good design. This stand is easy to assemble and install. It's perfect for: bike repair, parking, wash, drive train maintenance, variable-speed adjustment or just supporting the bike.

Brand: Vgeby1

6. Piece Bike Tool Kit Maintenance

Piece Bike Tool Kit Maintenance

The tool steel is heat treated. The complete bike tool kit. The CYCLISTS 23 piece bike tool kit contains everything you need to keep your bike in top shape. It is easy to use. The Bike Repair Tool Box is a set of tools for bike mechanics. The CYCLISTS bike tool kit is a must have for bike maintenance and is a great option for a mobile tool case. The bicycle repair tool kit is included. A chain rivet extractor, a chain ring nut wrench, a Crank puller, a Freewheel turner&lock ring wrench, and a Bottom brachet wrench are included. A tire patch kit, a lockring removal tool, and a flat/phillip screwdriver are included. The material is high quality. Major in bike accessories more than 10 years, they know a lot about cycling products, this bike tool set made in Taiwan is world excellence of cycling products. The tool set is made of premium carbon steel and high quality plastic. 100% money back guarantee. There is a quality guarantee for 12 months. They want you to be happy with your new bicycle repair tool kit and they will do everything in their power to make sure you are happy with them.

Brand: Cyclists

👤The kit is good quality. I like the way the tools fit in the case and it makes it a great portable kit. There are a lot of tools to work on a bike.

👤The quality of the tool set I bought was not as expected. There is a I am happy with the quality and the tools are sturdy and fit perfectly, even though there are only 23 tools in this set. There are 23 of them for normal bike repair. I used this tool set to fix 4 bikes, including removing wheels, replacing axle, detaching chains, adjusting shifters and brakes, and patching and replacing an inner tube. I had to buy a Park tool to replace my freewheel tool because it was designed for bikes with cassette, not freewheel. It would be better if this toolset included a ruler for chain, bearing, and maybe axle, a needle nose plyer, or an adjusted wrench for rim brake adjustment. There is more space for a small bottle of lub. I put one of my plyers, a small Stanley wrench, and a mini measuring tape in the case since there is still some space. There is a I have to put grease and lubricant in another case after the case is stuffed.

👤This was a good deal. I wanted a complete tool kit for my mountain bike repairs. The tool kit I ordered was very handy to install the cassette, unlink and shorten the chain, and remove the crank and peddles. The only tool I needed to purchase was the hub wrench from the kit. The quality is good for the bike tools, but it's all in one kit. I keep it in my truck. I put in a pump and plugs for tubeless tires. I have a repair shop.

👤The quality of the kit was not up to par. The 15mm didn't hold up to loosen a wheel nut. It should not have become damaged. I used the kit to repair bikes at a Girl Scout camp and the tool selection was not really that good. The tools were difficult to fit into the small spaces on a normal bike and were awkward to use on a lot of the bikes. I don't think it was enough for me to repair and tune the bikes. Quality issues make this kit not a good one. I won't be using this kit on bike event days because I don't trust it to fail. This kit is not a good choice if you want to buy a better brand of bike tools.

👤I was considering buying a bunch of ParkTools tools. I wanted to swap out the entire brakes and drivetrain on my Santa Cruz Tallboy, but I didn't want to do it poorly. Everything I needed was in this kit. I had to buy that separately. This worked perfectly for me. I was able to swap out the free hub body, cassette, rear derailleur, crankset, chain, and both front and rear brakes with the help of these tools. The bike shop wanted to do a parts swap and I was able to save $250, so I didn't have to wait 2 1/2 weeks for them to hold my bike. Would buy it again. There is a The only complaint I have is that some of the tools are so loose in their slots that they fall out when you open them. I'm glad they have a case and aren't all loose.

7. Feedback Sports Sport Mechanic Repair Stand

Feedback Sports Sport Mechanic Repair Stand

It's easy to setup and assembly with the key included. The Spinner Knob is used for precision closing. easy access to any part of your bicycle is provided by the 360-degree rotating design. The frames are from 42′′ to 65′′ in height. The rubber-coated clamp is used to protect and secure expensive components. Even the largest diameter frame tubes can be accommodated with a Clamp opening up to 1.9′′. Anodized T6 aluminum and steel is incredibly durable. The rubber-coated end caps and stiff tripod base give ultimate stability.

Brand: Feedback Sports

👤Pros and cons. The fit and finish of the tool are as good as any I have seen. It arrived on time, the instructions were decent, and it was easy to set. I expected this to be a 4-5 star rating based on the positive reviews and first impressions. There is a I purchased this to maintain two bikes, a road bike and e-bike. The is advertised as being able to handle up to 65 lbs. It doesn't. It would barely hold my road bike at any angle other than perfectly horizontal, if the clamps were not Torqued as hard as I could. It was not enough to hold the e-bike. I wanted to like it. It was useless to me. I sent it back. Maybe I got a bad one.

👤I changed my rating because it wouldn't hold a mountain bike. The bike will just rotate the front end even if you tighten it. It might be ok for lightweight road bikes. The three leg design is not as robust as the blue brand at this price point. It should be less expensive. Tubes are thinner as well. I would go somewhere else if I needed this for a lot of bikes. I already had issues with one of the big blues stands and a cheaper brand was unstable, so I just keep this one for my few times a year I need to do service. It does its job. When folded, it is generally compact but still tall. There is a You may need to de-bur the leg bolts. The first time I cut myself I extended the legs from the end of the bolts. I covered them with gorilla tape after taking a rasp to them. It was kind of shotty. Again for this much.

👤I almost didn't buy the stand because of the review that said the rotation didn't work properly, and it relied on pressure related tension to keep its position. The bike wouldn't sit horizontal if the guy on the video used his stand. He was wrenching it down as well. I don't have this issue. I installed an ultegra front-derailluer immediately after the stand arrived. There was no problem getting my bike to sit in a horizontal position. I am a bigger guy and I can do serious damage. If you are a sissy, you might look elsewhere. My wife's bike weighs 25 lbs, no problem. I kicked the bike up into a position in which the tires were over the top of each other, completely sideways, while gripping the bike by its seat post. It was clear to me that this position put a lot of force on the stand-arm. I don't think I'll be hanging my bike that often. I only did it because I was curious. I don't see a problem with this stand. It is not a tank, but it is good for me because I am very picky. I didn't buy it because I thought the bike wouldn't sit perfectly horizontal while being gripped by the seat post. I was turned off because of that. I will keep it because it is doing good for me. The bike should be hanging over two legs, not just one. I'm worried that the swivel might not hold up after a while. I don't see why the tension would change unless something wears off. I don't think it will happen, but I will update this review if it ever does. I've been trying to install the front derailluer correctly for three days now, with the bike turned upside down on a table. I re-adjusted it in ten minutes. I was able to find my mistakes quickly because I could see them clearly. If you want to do serious repairs on your bike, you should buy this thing. I am very happy with the result and I would recommend it.

8. BIKEHAND Bike Handlebar Holder Bike

BIKEHAND Bike Handlebar Holder Bike

60-days money-back and 24 months warranty are offered. They are confident that you will love their barbell clamps as much as they do. If you have an issue, please contact them. They will make it better by learning from your experience. The application is for something. When the bike is parked on a floor parking rack or on a repair stand, the handlebars and front wheel should not move. There is enough clearance for the displays mounted on electric bikes. There is dual protection. An elastic band is used to hold the holder in place. The holder's body is wrapped in a thick coating to protect it from being hit or scratched. The length is 385mm. The weight is 386g. The opening width is 120mm. You can order now and pay free. They can provide a 2 year warranty on their product. It was made in Taiwan.

Brand: Bike Hand

👤I don't have to twist when I'm working on the bike. So helpful!

👤It's useful when working on bikes. I am glad I chose this because there are other free ways to stop your front end from flopping about.

👤It could be a little stiff. It works.

9. Bikehand Bike Repair Stand Maintenance

Bikehand Bike Repair Stand Maintenance

If you're dissatisfied with this item, please contact them, they can offer you a solution. Extra heavy duty and portable. The repair stand is made of aluminum with heavy duty alloy. It is light and compact when folded. It is convenient, durable and well-designed. The bike's weight is either 50 kilo or 120 kilo. HEIGHT ADJUSTED: Quick Release is adjusted from 1m to 1.5m or 39"-59" fully extended. The height, tilt, and angle all have quick release. It's helpful to get the bike in the right position. The head isROTATED: it is smart and rotates at a rate of 350 degrees. The teeth are heavy and well made. It could hold a lot. A bike at any angle. The tool plate is foldable. Attach or remove the tool plate by hand, and it will be easy to set up and store. It isdurable: One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack.

Brand: Bike Hand

👤I like this stand. The heavy duty model is what it is. The fit and smooth operation of all the parts is really good. It is a quality stand and holds my bike. Then I looked at something. The angle of the 2 extension legs is pointed at by the arm which holds the bike. You can see this in my photos if you look at the legs compared to the tool tray and arm. The inner slide tube clamp assembly is positioned on the top of the outer tube. The extension leg mounting holes are in the same tube as the notch. I believe there is a factory tooling defect. Their alignment measures are off. Maybe mine is an exception. Anyone else notice this? Have you noticed this? I will post this in the questions. I'm going to cut the notch wider to fix it. If you're going to make a nice stand, you should get your centers correct.

👤This thing tips quickly. While a bike is on it it is only okay stable, but when put on or taken off it flies backwards. The plastic on the clamp is cheap and likely to break under some pressure. I have a heavy duty model that I am a bike assembler. I will build many bikes a day. There is a The stand has a small tool tray. It is very flimsy and you can't fully tighten the two bolts that hold it onto the stand. The plastic bolts are useless after the first few weeks. I have grown accustomed to the instability of the stand, but it is still a nuisance and tips often. I am careful with the plastic handle of the clamp. I am not changing the stars.

👤The product did not operate as advertised despite the positive reviews. There is a The head can't be rotating when the head is loosened enough. I watched the no-help video to see if I could move the clamp further. After several hours, things loosened up a bit so I can rotate the head, but I can't clear the teeth. There is a The quick release does not work well for the legs. It acts as if it's either loose or tight, but there's no goldilocks here. The unit kept closing on itself because the legs were not secure. Very disappointing. I eventually got it to hold, but it isn't confidence inspiring. There is a There is one missing in my unit that is metal and associated with the rotating aspect, yet the head has what appears to be five screws. There was a random screw in the bag, but there was no thread in the head to determine where it was supposed to go. Again, not confidence inspiring. There is a The seller. I want to know if you will send me a returned unit next time. The box had been opened on one side and retaped on the other side. Even though the tape was on, the unit almost fell out of the box.

10. Bikehand Bicycle Mount Repair Stand

Bikehand Bicycle Mount Repair Stand

Who would give their right arm for an extra pair of hands? The Powerfly wall mounted bike clamp is a strong arm with a firm grip that holds your bike in a fixed position for as long as you need so you can give both hands to cleaning, calibrating and repairing your bike. Isirid: The repair stand is more rigid than portable or foldable. It can handle a lot of bike work, such as removing and installing pedals. At any angle, the max bike weight limit is 55 lbs. ROTATED HEAD: Smart Design: head rotates at an angle. The teeth are heavy and well made. The wall is close to the center of the clamp. It isdurable: The bike work stand has been in the market for a long time. One of the most reliable and durable bicycle repairs stands is available for home or shop uses. They have enough parts for any claim. There are any mounts to a flat surface. Bolts not included. You can watch the video in the listing. You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan.

Brand: Bike Hand

👤The price difference between this unit and the others is the basis for this review. For an occasional user. There is a The overall design is good. The plastic teeth that allow the bike to be pivoted will wear out after repeated use. If the teeth were low grade steel the manufacturer would have similar production costs and the price would not be different. The manufacturer should look into this option. The Eventually the Rounded over spline and subsequent loose head unit will allow the bike to rock up and down when in the clamp. No wheel alignments, etc. There is a Also. You cannot apply too much Torque. There is a lot of twists. There is a In the head unit. You can with this unit. Change the gears, wash the bike, chain clean, and inflate the tires. Also, etc. Do on bike wheel alignments Torque a bottom bracket for removal, and other things, is not possible with this unit. Conclusion This is a value based product offering.

👤I am a mechanical engineer, and always look for quality of construction, and I am impressed with the Bikehand wall mount bike rack. I think it is as good as the Amazon ad. I put it on the outside of my garage door with two long lag screws and washers. I didn't hang on it, but it seems to be able to hold up two hundred pounds of load, so I'm pretty sure it will hold up my bike. I was able to get to anything I wanted to do with the comfortable access the clamps gave me. After using it to clean up, adjust and lube my bike, I removed the rack and screwed the lag screws back into the door jamb so I wouldn't have the black base arm sticking out as a hazard and for appearance, which took about two minutes. Next time I use it, I'll put it back on the wall. If you plan to use it frequently, you would want to mount it somewhere permanently, but this works well for me. I don't think I could buy a bike stand that was more stable and portable than the one I paid for.

👤This thing is perfect for the price. I put mine on the backboard. I added a series of holes to the backboard which allow me to mount it using long bolts and metal brackets to an outdoor 4x6 post on my porch and then bolt it to my automotive engine stand with 4 bolts and wing nuts. I could take it with me to the post office. I can also use a bench vise to hold the plywood piece in place, as I found it works really well. I have a tool that holds it steady. I suppose I could attach it to the base. There is a You can put it on a wall. I like being able to use it in different places. There is a It holds my bikes well and is sturdy. The price point can't be beat, even if you pay less for a regular stand. If you add a couple dollars to the cost of the brackets and bolts, you can use them in a variety of ways.

11. Indoor Storage Bicycle Parking Maintenance

Indoor Storage Bicycle Parking Maintenance

ORDER NOW! It's free! They can provide a 2 years warranty because they're so confident in the product quality. It was made in Taiwan. The multi-use bicycle stands are designed for both bike stand and home floor parking rack. You can use it for simple bike maintenance. It's a good choice for mountain and road bike storage. The repair rack structure is made of heavy duty steel which makes it sturdy and easy to use. Simple, portable, durable, space saving and easy to use. 6 holes in the tube are used to adjust the hook height to fit the bike seat stay and chain stay. The rubber on the hooks protects them from being scratched. Sturdy and effective. The two hooks stability is hands-free and no more struggling to lift and hang bikes. You can safely store your bike in your garage, shed, yard, apartment, basement, home or retail bike shop without damaging it. You can assemble the rack by yourself with the help of the package. You can assemble the rack by yourself with the help of the package.

Brand: Amzbs

👤It doesn't work for my bike. I kept it for occasional repairs. I have to hold the bike or stand because it won't hold it on its own for long. The hooks don't work with my bike because of the placement of them. The product was kept for emergency use.

👤The rubber that is used to protect the frame is not very good and can be thrown away. The first one I got had incomplete parts, but the one I have is the replacement. I have to return it and buy it again. I think it's a good buy if you're saving. If you are a person with high standards, it's not for you. The price is high for the structure of the item, which is a budget wise product. That is the main concern. I gave this a 3 star because of that. Thanks.

👤It was a good bang for the buck. You can't do everything on a bike with this, but I'm not sure what you expect at this price point. It is built well and disassembles easily.

👤I need to keep the front wheel straight or cut to the right when using the stand on my bike. The bike will tip over if it's to the left. It works well, other than that.

👤This is what I needed to fix my bike. It was a challenge to assemble, but once it was done it worked as advertised. I am not a big bike rider. I like to make sure my bike works properly without spending a lot of money, and this stand fits the bill.

👤It's a good idea and I liked it. It needs to be made out of heavier-duty materials and the geometry of it needs to be changed a bit, not to mention not all the holes line up the way that they're supposed to, if someone took this basic concept and did some quality control on it, I think it

👤The stand is not stable. I had to drill another hole for the upper support hook because the vertical support rod is too short and the predrilled holes for support hooks did not go high enough.

👤Don't have to lift the heavy ebike in the bike stand just to the oil chain. It works great when you adjust the hooks on your bike frame. Solid construction was pleased with.

Summary

What is the best product for bicycle stand repair?

Bicycle stand repair products from Cyclespeed. In this article about bicycle stand repair you can see why people choose the product. Clothink and Mefetop are also good brands to look for when you are finding bicycle stand repair.

What are the best brands for bicycle stand repair?

Cyclespeed, Clothink and Mefetop are some of the best brands that chosen by people for bicycle stand repair. Find the detail in this article. Ascely, Vgeby1 and Cyclists are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com