Best Bicycle Stand Rack

Stand 11 Aug 2022 10+ Comments Open

1. Swagman Park City 6 Bike Stand

Swagman Park City 6 Bike Stand

RV approved can be used with a hitch on the back of the RV. Stores with up to six bikes. It is quick and easy to assemble. The zinc and powder is coated with something.

Brand: Swagman

👤The fit/finish is first rate and it's a sturdy rack, made with heavy gauge steel tubing. I'm very happy with this part of the product. I chose this rack because it allows me to put bikes on both sides, so as to fit the long shape of the garage available space. It takes about 10 minutes to assemble, just 8 bolts and nuts. There is a The reason I gave it only 3 stars is that it does not fit all tire sizes. The six thinner slots will not fit tires wider than 2.2", so I wish they could have spacing the vertical bars evenly. There are only two wide slots for mountain bikes with tires larger than 2.2", and they will have to go into them. Two of my bikes are too wide to fit in the family's car. It's not something one should have to worry about when changing tires for other bikes, as the rack will limit tire width. I took away a star because of this. A star is lost because a tire does not fit. The rack is too small. I can jam the bike into one of the wider slots if I tilt it, but this is not a proper fit. The rack will fit a 29er tire if they make it taller. It takes a bit of planning to stack the bikes. The handle bars shouldn't interfere with each other so you would alternate front-back-front. You have to be careful that the wheel of one bike doesn't hit the brake rotors of the other bike. It takes a little planning, but evenly spacing vertical slots would have alleviated this issue. I use disk brakes on 5 of the six bikes I own. Had I known about the limitations, I probably wouldn't have bought it. A different rack would have meant more space to hold the bikes, but at least many of those rack have no wheel size limitations because they don't have a top cross bar. I will live with it.

👤The bike stand is solid. We have two adult bikes and three kid bikes in the garage. It could hold four bikes comfortably, but one of ours is a small child bike that sits out of the way of the other bikes' handlebars. There are bikes on the stand. There is a I knocked it out on my own in 15 minutes. The box arrived completely trashed, with parts of the stand jutting through the sides. The box is not sturdy in the least and the parts are not well packed, so shipping damage would be easy. No parts were damaged or missing when it arrived, but others might not be so lucky.

2. BIKEHAND Floor Parking Storage Bicycle

BIKEHAND Floor Parking Storage Bicycle

You can assemble the rack by yourself with the package. The free standing floor stand is great when you still need the flexibility to move your bike around, whether it is in your garage, bike store or at a race. A patent design has been awarded. Two pulleys design with an adjustment position. It fits any bikes with wheel sizes from 24 to 29". It's just a simple slide in. The fat bike has 4.0" tires. The front or rear wheel slides in. To make the bike stable, you have to sit in firmly. This rack is great for high end bikes. It does not bring scratches to the bike's frames, disc rotors, cassettes, etc. The package has a bike holder. The required assembly tool is included. A steel frame with a rubber base. It's perfect for cement or timber floor. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.

Brand: Bike Hand

👤Leaning a bike on a vertical surface is annoying. Then it falls over. There is a The stand works well for my fat bikes. The bike in the picture has a 3.8" tire, which makes it easy to fit. I have a picture of my tire on my Ebike, it fits just fine. It is sturdy and holds my plus fat bike upright, despite the easy assembly. I use this in the bed of my truck when I transport my bikes. If the bike is going to the bed, I just strap the rear. Works well.

👤The rack stand is a little flimsy, but it's ok for that. You should park your bike. The instructions are on a piece of paper. The instructions were mostly adequate. I had to look at the picture of the stand on Amazon to get a better idea of where some of the bolts go. If you can put together a model airplane or car, then it should be a picture of cake. I've used the rack in my truck to help transport e bikes, without anchoring the stands. Doing this is a bit difficult. The rack will work well in a pinch if you use it frequently. You should anchor the stands to your truck. There is a The rack does fit under the wheel, which is a good thing. It's difficult to find stands for fat tire bikes. If you're just looking for a stand, then this product will do the trick, but if you're looking for a stand for transport, I would suggest something else. The ability of the stand to hold larger fat tires was liked. The stand for the bolts could be better threaded with thicker tubing.

👤This stand is amazing. It is lightweight, easy to adjust, and sturdy. It was purchased for my son's Marin San Quentin 24 which came with 2.6 wide tires. This stand handled it well. I put my 29er with wide tires on it to test it. Still... handled it well. There is a The top two knobs are easy to remove to move the tire up or down. They don't move while you tighten them. I took pictures for reference. Enjoy!

👤I am very satisfied with my purchase of this bike rack. The features are changeable. I have a 29" MTB with big tires that wouldn't fit in my old bike rack and this one works perfectly. It is easy to put a bike in and out without touching the rack. If it came fully assembled, it would be better. It takes about 10 minutes to assemble but all the necessary tools are included.

3. Bikehand Floor Parking Storage Bicycle

Bikehand Floor Parking Storage Bicycle

The wheel holder can be stretched from 2.5'' to 3.5'' and can hold a road bike. Patented simple push in design is easy to use. You need to lift the bike and put it in the stand. When you push the bike into the rack, the front holder will tilt. Heavy bikes such as downhill, mountain and beach bikes will be perfect for this design. The most stable bike stand has three points on the tires, which is better than other stands which only have one or two points on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel stays in the holdder because it's deeper than others. The dynamic stand base makes it impossible to tilt the bike if you push hard. It is possible to fold the stand into a flat shape within a second with a simple one-pull-knife. Your bikes will not be lying on the ground anymore. The steel is heat treated and has a fantastic powder coated finish. If used correctly, this stand will last forever. All bikes are compatible. The bike stand will fit almost all bikes, but only those with the tires more than 2.4" in width. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.

Brand: Bike Hand

👤After years of leaning my bike against the wall, some serious smudges had developed. I bought this to store my bicycle upright, but not against the wall. There is a It works, but not well. The rack is too light to support my bike with my panniers, and it doesn't have enough weight to stay in place as I attempt to roll my front wheel into the well. When I try to put my bike in it, the rack scoots away, and unless I'm very careful, it leans into the wall. There is a I recommend the procedure if you've purchased this. To orient the rack, drag it away from the wall. 2. Use your foot to tilt the mechanism. Roll your front wheel into the slot and secure the rack with your foot. 4. Lift the back of your bicycle and orient it straight behind so that it has the best chance of standing up. 5. If you have a weight on your bike, you should turn your front wheel and rack towards the weight so that you can form a triangle with the ground. There is a How to remove the bicycle from the rack? I haven't found a way to keep the rack in place. There is a It seems like the greatest improvement would be to weight the base of the rack so that it's more stable.

👤I was afraid that my road bike wouldn't be stable in this storage stand. There is nothing to worry about. It keeps the bike stable and holds the skinny tires. It was well designed. Excellent product.

👤I was tired of putting my expensive road bike up against the wall and hoping it wouldn't fall over, and also scratching up the walls and possibly the bike. I wanted to keep it standing up without having to lean it against a wall. I agreed after reading a post that said your expensive bike deserves a quality bike stand. I initially ordered a different stand. It was $5 cheaper than this one. The one that popped up on my screen had an extra component that they call the "push-in simple design and the wheel sits deeper." I ordered it from Bikehand after I saw that it had a lifetime warranty. The stand works well and the wheel slides in so the bike stays up. The bike has 700c x 23mm tires and works as advertised.

4. Park Tool PCS 9 3 Mechanic Bicycle

Park Tool PCS 9 3 Mechanic Bicycle

Universal Fit is the type of fit. A fully-adjusted, single-use, single-purpose, single The height can be adjusted from 39 to 57. All-steel structure with a powder coat finish. It folds quickly, easily and compactly for storage. Perfect positioning is ensured by the use of Teardrop-shaped tubing.

Brand: Park Tool

👤I have to admit that I am a bit obsessive. I took the pictures during unpacking because I wanted to re-pack the stand when I returned it. I couldn't find anything wrong with this product, so I looked. The instructions were perfect. All of the hardware was included and they were written in clear English. The packaging was good. There were no dents, scratches or bent parts. I was pleasantly surprised to find that all of the hardware was in line with the instructions. All of the holes were lined up perfectly. There is a The stand was as solid as I wanted it to be. It was very easy to use. It was easy to fold up for convenient storage when not in use. There is a I would definitely recommend this unit to anyone in need of a repair stand. I couldn't find a reason to return it. I will have to keep it for a long time.

👤Solid Park Tools was a great price. It's difficult to fold up and unfold due to being new. Almost needs two people. That's an operator error. It's portable. Very stable. It should last forever. It makes bike work better. It is very user friendly.

👤You pay for what you get, not what you don't. You pay for this. Stand up. It won't fall apart on me in the middle of a tune up.

👤This is useful. I use my mountain bike all the time. It is great to hold the bike while doing something to it.

👤The stand is great for fixing your bike. I like the range in height it offers, and you can rotation the bike 180 degrees without taking the seat-post off.

👤This holds my bike. At the lowest adjustment. I like to sit when I work on the lower part of the bike. I didn't want to pay $60 more for a tool tray. I am happy I got this model.

👤It's so much easier to work on my bike with this stand. Would recommend to anyone who loves bikes.

👤I think it is expensive. You always get what you pay for, even though that feels sturdy. I like buying something sturdy than buying cheap tools.

👤The repair stand is very sturdy. Excellent build quality is what it is. One M5 bolt was missing, but it was well packaged. I had to source this before I could assemble it. The packaging was machine-sealed. There is a It is overpriced, but the next step down in price range is flimsy plastic builds. There is a The 9.3 is the opening model in the repair stand range. The other models do not provide any benefits. It is built to last and has professional utility. You will get a quality product if you take the hit on price. Wouldn't hesitate to recommend.

👤The stand is very well built and easy to assemble.

5. Deuter Stationary Magnetic Reduction Technology

Deuter Stationary Magnetic Reduction Technology

The Unisky indoor bike trainer stand can fit most road or mountain bikes with a 26-28" or 700c wheel. If you have a road or mountain bike of normal size, you don't need to buy a new one. The bike trainer is usually not compatible with electric bikes. If you're not sure, please contact them. Bike Trainers are indoors. When the weather gets bad, it can keep you off the road or trail. Maybe you need to avoid rush hour traffic or an unsafe dusk ride because it is raining or too windy. This is the time when you can get the exercise that you want, but at home. There is no reason why you can't exercise with your bike in bad weather. The structure and high load-bearing capacity are strong. The pyramid structure of the unfolded bicycle training stand improves the stability of the entire frame. It is able to hold a weight of 330 pounds thanks to its strong material and stable structure. Any bicycle with a wheel diameter of 26 to 29 can be fitted to their stand. 6 level resistance can be adjusted. You can change the resistance from your handle bars directly with the drive-by-wire device. You can change the magnetic Resistor and the resistance levels in a matter of seconds. There is almost no sound on the platform. It is recommended to replace smooth tires during cycling training to reduce indoor resonance, as well as add carpet under the stage. In some cases it will be loud. If you owned rough tires, be careful. No matter how expensive the tire is, it will be loud with all bike trainers. The portable bike exercise stand is portable. They designed the bicycle training rack to be a folding style in order to make it easier to carry. It only takes a minute to set it up and adjust the contact between the wheel and roller. You can put up or unfold the stand to complete the installation and disassemble it.

Brand: Cxwxc

👤I bought this stand because it was out of stock and no estimated arrival date. I thought it would be easy to assemble a bike stand. I was wrong. The product was missing screws that held the mag wheel to the tire. I gave up trying to get the screws. I am sending this junk back after 30 days. I would highly recommend SONGMICS Indoor Bike Trainer Stand. I like it. It's sturdy and doesn't have any screws to mess with.

👤It seemed like a good way to burn blood sugar down for my diabetes. I got it assembled and sat down for my first ride and it went crazy. It's VrrrooOOOOO! "Growlllll!" Every pedal makes your neighbors shiver. They are going to hit their fist on your door the first night. I have to buy a legit bike. I'd have to sell it now because the cable slipped into the gear. How do you get it back?

👤The overall design is ok, but the main frame that holds the bike wheel in place was not properly fixtured during the welding process and the bike is not held in a "reasonably true" vertical position. The tire runs very close to the resistance roller assembly when it's 5 degrees off. There is a The quick release "skewer" provided is not a complete assembly and will not work with most bike wheels, so if you want to use it as described, you will need to go to a bike shop to have a proper quick release axle installed. The sale copy or assembly instructions don't tell you that the axle holders can be used with any standard quick release wheel. The cup ends of the wheel holders were not fastened tightly to the support screw shaft or quick release mechanism and needed a metric Allen wrench and washer to fix them. There is a The resistance adjustment knob did not tighten the handlebars. I had to cut the end of the bolt of the quick release lever to make it tighten. I should send this unit back to Amazon, but it's too much effort to repack and ship it, and we'd be at risk of a similar disappointing state if we chose a replacement. I will heat the frame with a torch and bend it until it is straight and true, then re-paint it. The manufacturer has poor quality management and process tooling. Is it cheaper to make a good product than to make a bad one?

6. EDMBG Parking Single Storage Bicycle

EDMBG Parking Single Storage Bicycle

There are 2 cleats, 2 cleat washers, and 4 cleat mounting bolts. The all tubular steel frame is sturdy and can be anchored to most flooring. The black powder coated surface is Rust resistant. The stand can be adjusted by adjusting pad thickness to prevent the floor from scratching. It is possible to hold a maximum 26” tire and a maximum 2.0” tire. The assembly is happening No anchoring hardware is required, holes are in place for anchoring. The assembly is happening No anchoring hardware is required, holes are in place for anchoring.

Brand: Edmbg

👤Exactly what I needed. I keep both of my bikes indoors and well-maintained as I ride 888-349-8884 The stands are the perfect size for a good price. I thought about it. They are very sturdy, hold both my hybrid and cruiser, and the simple rubber height adjustments on the feet are very useful, because one bike was leaning on the floor, and I had to adjust one side of the rack to the highest level. They were delivered a week and a day early and no assembly was required.

👤The bike rack was on sale. It doesn't do a good job of keeping my road bike from falling over. It doesn't work on the front wheel, and with the rear wheel in the stand, it has to be balanced just right. I worry about the spokes being put under too much pressure. It was fine for keeping the bike upright as I did things like take the brake calipers off and replace the closed cell foam. I haven't tried it with my mountain bike, but I think it would work well with a kids bike or a 24" wheel, and I think the kickstand is unnecessary. If I had paid full price, I would have sent it back, but the price I paid suffices for my purposes. The strength of the metal and how it's made makes it a good candidate for high sturdiness.

👤This was perfect for my mountain bike. I wasn't sure but it is stable after reading other reviews. Also, a good price.

👤I couldn't see it in the pictures, but as soon as I tried to stand a bike in these, it was obvious that the bike is too heavy. The only thing holding the bike up is the supports. A gentle push of the bike to either side would cause the spokes to break. Do not buy these if you own a bike.

👤Since my bike does not have a kickstand, I needed a rack to hold it up. The gem does the trick. Even at an angle, it holds up my bike. The design of the floor prevents scratches.

👤I needed this for storing my bike. Why didn't I buy this design years ago? I unboxed it, put it on my floor, rolled my bike in, and it worked!

7. Begona Adjustable Space Saving Stationary 20 29Mountain

Begona Adjustable Space Saving Stationary 20 29Mountain

To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you. Space-saving, Multi-occasion use. The base of the bike stand is higher than the upright bike rack, freeing up 4 feet of floor space. Storage is easy to outdoor and indoor, including garage, apartment, living room, bedroom, park, gym, workshop, warehouse hallway or other narrow space. The design is safe, steady and labor-saving. It's easy to put the bike on the floor stand rack. The upright bike stand has long support legs and a higher base to protect the floor from damage. This will be more stable in windy weather than other rack bases. Easy Assembly andAdjustable Height. Independent floor stand bike rack, fiting for different indoor heights, without drilling and will not scratch any walls and ceilings. The red rubber hook keeps the tire in place and makes the bike stable. The screw can be adjusted according to the size of the tire. Installation can be completed in a few minutes with a detailed manual. The stability of the vertical rack is better than the rectangular base, which is not easy to tilt or shake. You can store the bike vertically or horizontally. The max vertical height of the rack is 1290mm and the max tire width is 2.42”. The surface of the upright bike rack is evenly coated with high-quality steel and powder spraying technology, which makes it rust-proof. It can maintain excellent state, long-term use and stability. The product has undergone at least 3 quality checks. They support a return service guarantee if there is any unhappiness with the product. The surface of the upright bike rack is evenly coated with high-quality steel and powder spraying technology, which makes it rust-proof. It can maintain excellent state, long-term use and stability. The product has undergone at least 3 quality checks. They support a return service guarantee if there is any unhappiness with the product.

Brand: Begona

👤We bought 3 of these stands. I have tried other carpets but they did not offer the stability I was looking for. We didn't want to hang our bikes on the wall, so I wanted to try this stand with the wider stability legs on the carpet. It works well. The legs are easy to put together, but if you put them on a ceramic floor, the stability would be even better. Very happy with the product. Excellent organization.

👤I tried to assemble this after a long day. I needed some close up pictures of the rack to understand the instructions. Does the red piece stay on? Some pictures it was on, some it was off. It stays on. Getting my bike onto the rack and figuring out my adjustments was a challenge. Those are all the negatives. I got it together and adjusted it. It works. My bike is now in the stand vertically, with a rack on it. It saves me some space in my apartment. All is well that ends well.

👤The only negative thing about this product is the cheap aluminum nits and bolts. There is a I had to adjust the pads for the rear tire on my 29er MTB because it wouldn't go through and get stuck. It turned out great once I figured that out. I would definitely buy this product.

👤The build quality on this is not good. Half of the bolts don't line up. I needed a metal file to make them bigger so I could get the bolts through, but the metal on the bottom of the stabilization bar was too wide and the bolts were too short to pass through it. The holes for the spring loaded pins that attach the legs to the base were positioned so that the clamps that hold the bike wheel to the base pushed the pins in and made the legs unstable. These issues make it not safe or stable. I have it wedged between a couch and a corner, but a stiff breeze would blow it over. I don't think this is a good idea.

👤The tire stand has quick release buttons. The tire holder brackets could be interfered with by the quick release buttons. The installation felt flimsy, but it is doing its job.

👤I had to use gorilla glue for the pieces to be stable and not wobbly even though I tightened things. I have to lift the bike a bit to put it in, otherwise it will slide across the floor until the wall stops it.

8. Vertical Mountain Standing Adjustable Space No

Vertical Mountain Standing Adjustable Space No

If you have any questions during use, please send an email to them at any time, they will help you solve the problem in the first time. The bike floor stand is made of high quality steel and has 4 corners covered with rubber cap to avoid scratch ground and reduce noise. It looks like it matches your bike. It can make your bike stand up. All bikes are fit. The bike stand will fit almost all bikes, except those with the tires more than 2.4" in width. If the fender is too long, just swap the front and rear position wheels. There is space. The bike stand is free of floor space. It's perfect for an apartment, dorm room, a garage with too much stuff in it or other limited space. The length is 21.65in, the width is 20.86in, the height is 44-50in, and the width of the tire track is 3.93in. The weight is 3.8 kilo. The portable multi-functional bicycle parking rack is easy to carry and install. The bicycle can be parked vertically or horizontally with the product manual. The length is within 1240mm. The bicycle storage stand height can be adjusted up to 50” after assembly. If you have a question about the product, they will try their best to help you. If you have a question about the product, they will try their best to help you.

Brand: Eocik

👤It allows your bicycle to take up less space. There is a It seems like it is stable holding my Cannondale Quick 4. The price was reasonable. There is a Shipping was fast. There is a It wouldn't fit together because of the bent lower brackets. The box the manufacture shipped it in was in perfect shape and as hard as it was to bend (hammer and a block of wood) back into the correct shape leads me to believe it was packaged already bent. Many people would have exchanged it. There is a I suggest you buy the LuBanSir Cinch Straps, which are 2 x 18 inches, to secure the wheel to the stand. If it had arrived undamaged, I would have given it five stars.

👤I ordered 4 of them. The item works well and does not require drilling into the wall. It gives flexibility. Some manufacturers have quality problems. The screw may not line up, the metal may not be removed to make a hole, and in one package a shorter screw was provided instead of a longer one. The plastic bag was made poorly. The produce's function is not impacted by these issues. The design is good. They did not find a good manufacturer.

👤The old stands wouldn't work with the new bikes, so we bought 2 new stands. They were one of the few that could hold the weight of the e bikes. The stands could accommodate the bikes with the handlebars facing to the back or the front. There is a A cap wouldn't stay on the intended piece when one of the stands arrived. I gave the company the order number and a picture, but they haven't heard from me after 3 weeks. I would have rated this bike stand a 5 star if it wasn't for this glitch.

👤The bike is extremely unstable due to the poor illustration of instructions and the fact that the 2 piece pole was put into wrong position when drilled. One tap and it falls down. I have a smaller version of this bike stand that is different from the one I have now. All the parts are the same. It sits perfect but not for a 29" tire which is what this one does, and it is very disappointed on just one part that could make or break this stand. I'm returning it because of the lack of support from the manufacturer.

9. Venzo Bicycle Deluxe Storage Floor

Venzo Bicycle Deluxe Storage Floor

The mounting flange is made of steel and plastic and has 4 holes. You can make a bike repair area in your home or garage by installing the fixed-clamp stand. This mount can hold up to 20 lbs. The push in system is simple and easy to use. You need to lift the bike and put it in the stand. When you push the bike into the rack, the front holder will tilt. Heavy bikes such as downhill, mountain and beach bikes will be perfect for this design. Buying multiple stands and connecting them together will give you more stability. You can watch the video in the listing. Connected stands look better in the garage. The weight is either 1.72 kilo or 3.79 lbs per stand. There are three points on the bike stand that hold the tires, much better than other stands that only hold one or two points. The bike's front or rear wheel stays in the holder because it is deeper than others. The dynamic stand base makes it impossible to tilt the bike if you push hard. The bike stand will fit almost all bikes, including the 20 to 24 kids bikes, the 26 to 29 mountain bikes, and the 700c road bikes. A simple one-pull-knife will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car. You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan.

Brand: Venzo

👤My Cannondale Trail 8 Mountain Bike is in a safe place. I'm happy with the purchase, it seems well built.

👤I was worried about how well this device would work for my KHS Sport Tandem. It does the job well. I thought it would be nice to travel with our tandem, but it is not practical. When "folded", weight and size won't do. There is a The bike is in our garage and ready to ride. You need to make sure the bike is upright or it will lose its balance and tip over.

👤I used to have a lot of room in my garage, but I used to store my bike on a bike stand. I bought this and it works perfectly. The bike is easy to use.

👤Stable with more than 30lb of MTB. If you put two bikes side by side, there is only enough space for one bike.

👤Just like it's supposed to, hold my bike up? My mtb tires are 29ers and 2.25". It fits like a glove.

👤I use it on my all mountain bike, 29 wheels, 2.4, and E-bike mullet 2.6 wide wheels. If you're looking for more stability and support, you can connect in tandem.

👤The stand takes little space and holds the bike firmly.

👤I have two of the spring loaded stand and it is easy to operate. It will go larger than the 700 x 40 c wheel.

👤Great product. I bought it to keep my bike upright. It works well. Couldn't recommend it enough, it's easy to assemble and great value for money.

10. CyclingDeal Bicycle Floor Parking Stand

CyclingDeal Bicycle Floor Parking Stand

The rigid design of the rock solid base allows a secure base for awkward cycles. STABLE: The bike floor rack has been changed. The two holding plates with tire grooves are at an optimal holding angle. The feature ensures bikes are held in the stands. You need to fit 6 bikes in the stand if you put your bikes in different directions. One front and one back wheel. If there is large space, the bikes could be inserted from both sides. Strong. The stand is made of high quality steel. The black finish is powder coated. It is best to use indoors. The front and back plates hold the up holder. The bike holding stability will be affected by the wide holder. The bike stand holders are linked together so it is easier to use. Please watch the video in the listing. COMPATIBILITY: The rack is designed for all wheel size bikes, from the smallest to the largest. The tire width is 2.5. The back of the bikes should be inserted into the hold so that they sit in the front. The bike rack could not be touched by the disc rotor. The bike stand holders may be touched by bike hubs. You can order now and pay free. They can provide a 5-year warranty on their product.

Brand: Cyclingdeal

👤This product is very good. It's heavy, stable, and holds our mountain bikes securely. The video instructions have a bunch of bullocks. If you have two people and are a zen monk, you should not follow those instructions. It looks simple, but only on the video. If you follow them as recorded, you'll end up throwing it away or out your window, which could be fatal for a poor old lady trying to walk her Yorkshire terrier. Poor little Yorkie. To make this easy, build each stand as a separate stand and snap them together. It will be easier to keep everything lined up if you screw in the bolts that hold the sides of the tire holder. I wish someone had told me that before I tried to follow those directions. Maybe my neighbor Yorkie would be a good mother. There is a This is a quality stand and really worth the money we spent on it. It's long enough to fit all of our bikes and holds up when there's only one on the end. I gave this 5 stars, but I removed one at my physicist's request. If you get this stand, you will not be disappointed. Remember the dead.

👤It works great for our bikes. There are three adult bikes and three kids bikes. You have to take your time putting the bikes in. Each child can do it. It helps organize our garage. We preferred this over hanging. How could our kids not get hurt? They couldn't. The hanging or wall ones are great for older teens and adults.

👤We've been tripping over bikes for a long time and this solved the problem after half an hour of assembly. I didn't watch the video and the drawings were not good. If you've ever put together anything from ikea, you can handle this. It's a good thing. It's nothing fancy, but it does the job it's designed to do very well. We needed to put some in front wheel and some in rear wheel first. The bikes fit that simple modification.

👤It is easy to put together, but not level. It works fine for what we need.

👤It's easy to put together. I bought a bike stand. I had to assemble about 15 minutes. I had read that it was difficult to assemble and instructions were poor. I found it easy to assemble the instructions for these people as they are not capable of putting gas in their vehicle. I get a kick out of people bashing a product when it is their lack of ability that is the problem. If you need a nice bike rack at a cheap price, this will suffice.

11. Begona Freestanding Portable Apartment Mountain

Begona Freestanding Portable Apartment Mountain

Backed by 30 days money, the 100% SATISFACTION GUARANTEE. Back. The quality of the bike storage wall mount is guaranteed by them. Any issue with it is available. The Begona bike floor rack can be used in many bikes. The upgrade wide base can fit tires up to 3.74" wide. The bicycle stand is made of high strength steel. The high-quality steel frame is strong enough to hold heavy-duty bikes. The bicycle rack is powder coated to resist rust. cient parking solution You can use the bike rack to easily park your bicycle in a variety of places. No more worrying about where to put your bike in your room because you can put it in the free standing bike rack. One wheel stabilizier strap comes with a bike stand for free. The bike can be parked on the front or rear wheel without damaging the spokes or tires. Push the bike inward until the wheel stabilizer pops out to secure the wheels. Non-slip pads can protect your floor. To ensure a great shopping experience, the Begona bike stand undergoes at least 3 times of inspections before shipment. They will replace or refund you if you don't qualify for the bicycle stand rack. To ensure a great shopping experience, the Begona bike stand undergoes at least 3 times of inspections before shipment. They will replace or refund you if you don't qualify for the bicycle stand rack.

Brand: Begona

👤I own a folding bike. I like it so far. I would like it to hold the bike without leaning it. Maybe it is because I folded my bike. So far, good!


What is the best product for bicycle stand rack?

Bicycle stand rack products from Swagman. In this article about bicycle stand rack you can see why people choose the product. Bike Hand and Bike Hand are also good brands to look for when you are finding bicycle stand rack.

What are the best brands for bicycle stand rack?

Swagman, Bike Hand and Bike Hand are some of the best brands that chosen by people for bicycle stand rack. Find the detail in this article. Park Tool, Cxwxc and Edmbg are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to