Keep your garage or indoor space tidy and free up your floor space by storing your bike in a convenient location. Their wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Most bike types have a storage system. The bikes can hold up to 22 kilogram. Not suitable for bikes with wide handlebars (31 inches / 78 cm) or fat bikes. It is safe and secure to store your bike in a horizontal position. The wall mount is made from strong steel. The bike arm locking mechanism uses a reliable gear system. The angle of the wall hanger can be adjusted to keep your bike level. Installation instructions and mounting screws are included. The push button lock system ensures that the frames can be secured, and the cradle arms ensure that all the frames can be accommodated. A secure push button mechanism secures the extendable beam from 8.7 inches up to 12.6 inches. The Armcradles are made from soft TPR rubber material that will not scratch your bike. The frames are protected and the tube shapes are not marked or moved. To prevent front wheel from knocking against your wall, you need a rope that is strong and elastic. If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it.
👤The rack is nice. It is built out of quality materials and has a lot of flexibility. The mounting points for this rack are a bit odd. They provide you with 3 small screws and masonry wall anchors, when they should have provided a beefier faceplate and 2 lag bolts to mount into a stud. My solution was to take a piece of scrap wood and mount it vertically to a stud using 2 heavy duty lag bolts, then mount the original screws to the wood. The rack gets 5 stars from me.
👤I was concerned my handlebars were too long for your wall mount, so I sent Chris a letter. To make sure they fit, I put a 2x6 board on my wall stud and then put a wall hanger on the board. It allowed plenty of room for the handlebars. There is a I had a problem attaching the hanger to the studs behind the plaster board. There is a one and three-eights inch distance between the wall hanger's two holes. The wall thickness is one and one-half inches. There is no time to get a strong attachment with only a quarter inch overlap. The instructions give a good idea of how to install the hanger on the wall. They warn that the plasterboard won't support the hanger. Very true. The wall stud's width is insufficient. Instructions to attach a 2x6 to a wall stud and then attach a hanger to that board were added by me. There is a The cradles for the bike are red or black, which is a point of favor for the Pro Bike system. The shape of your cradles allows room for the control cables if the bike has them beneath the cross bar. Great feature. There is a Thanks for your help. I hope my experience is useful to others. You have a good product.
👤Highly recommend this bike storage system. Enough about how great it is. I want to know how to install it. You probably do as well. I installed 3 holders. The first thing to do was to find the studs. To double check the exact location of the stud, I used a finishing nail and hammer to find the sides of the stud. I was glad I did because some of the stud finders locations weren't right. There is a You can mount the 3 holes of the brackets into one stud with longer screws than those that come with the kit. Some people have said this works. It didn't seem like it would be stable. I decided to mount a 2x6 across two studs. A 2x4 is not wide enough. I cut the 2x6's 22” long so they fit over the end of each stud. I used lag screws to attach the 2x6's to the studs. I used lag screws on both ends. There is a You will need a impact driver to get the lag screws into the stud. A regular drill won't do it. If you don't have an impact driver, you can always use a sockets wrench. After I tightened the lag screws down, I had to use a sockets for the 5/16 lag screw. I measured the bikes with the holder to make sure there was enough space between them. The measurement resulted in a spacing of 40” from the top of one board to the top of the next board. It was perfect for my bikes. Different spacing is required for your bikes. The wall mounts are perfect. Unlike other systems that are horizontal, these allow you to adjust the arms to fit the different types of cross members as not all bikes are alike. I think they are worth the money. The 2x6x8 was $11 and the 12 lag screws were $9. If you decide to purchase these, I hope this helps.
It's easy to assemble this bike rack, it's just a matter of following the assembly diagram and putting it on the floor. All bikes should be fitted with up to 4.0" tires. Easy push in system. You need to lift the bike and put it in the stand. When you push the bike into the rack, the front holder will tilt. Heavy bikes such as downhill, mountain and beach bikes will be perfect for this design. The most stable bike stand has three points on the tires, which is better than other stands which only have one or two points on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel stays in the holder because it is deeper than others. The dynamic stand base makes it impossible to tilt the bike if you push hard. It is possible to fold the stand into a flat shape within a second with a simple one-pull-knife. Your bikes will not be lying on the ground anymore. The steel is heat treated and has a fantastic powder coated finish. If used correctly, this stand will last forever. All bikes are compatible. The bike stand will fit almost all bikes, but only those with the tires more than 4 inches in width. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.
👤Does not hold up a heavy bike. A beefier cousin is needed to support heavier e bikes. The failure to support the weight of a Juiced Hyper Scorpion ebike caused me to return my set. There is a motorcycle rack. I like the basic design.
👤I have had these for a short time and they do their job well. I was frustrated by the size gap between brands because "regular" sizes seem to cut off at 2.3/2.4 tires, but "XL" sizes seem to start higher. The Feedback Sports RAKK is barely large enough to hold a Maxxis DHR II rear tire. My bikes have 2.6 front tires, and these Bikehand units are able to hold them. The wheel well seems well-built and there are no issues with tipping over. A good purchase so far.
👤The stands were installed on my ATV trailer. They work perfectly. The bungee cords are a perfect solution for transporting our electric bikes.
👤I have multiple bikes with different tire sizes. The rack does not have to adjust because it handles all the widths. I have been using different stand up racks for years that are not as stable. I will be converting them to this style.
👤I have 2 of these for my mountain bikes and I can understand some of the comments that it is not well adapted for heavy bikes like e- bikes. I have 29" bikes with fat tires that work fine for me but I would be concerned about their stability if they were heavier.
👤I used to have a bike stand on the back of my trailer. I bolted them down and now hold the bikes securely with the strength of a tie down.
👤The bike stands are worth a lot of money. We pushed on our bikes to make sure they wouldn't tip over. They did not. These stands are used to support your bike. The bike tires are 27 1/2 and 29 They fit great. I recommend them to everyone. The bikes can be put on and taken off the stand. There wasn't an assembly.
👤These are made well and do a good job. If I had to buy them again, I would buy the loop over the wheel version, rather than the roller set up on these. Heavy bikes fall over on the stands. I like them.
👤These were bought for heavy bikes. It's easy to use at home when we go camping or travelling because they are sturdy and compact.
The wall has a mount on it. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. If you have any questions about the installation, seek professional help. It's possible to hold your bike in a stable position with a lever and adjust the height to make sure your waist is comfortable. The intensity of aluminum alloy tested can afford a max load of 60 pounds. Tools with MAGNET. The big tray has a place for different tools and is more space efficient. There is a front wheel. No knives. The package includes a tighten rod that won't let the front wheel turn when you're working. Sturdy triangle base with rubber feet will hold bikes steady and won't scratch the floor.
👤Great stand! Light weight, holds my 55lb eMTB and seems stable. It folds up like a camera tripod for storage, and is easy to use. Very happy.
👤The bike stand is a great product and a good value. The assembly instructions are confusing, but they went together well. I contacted the seller and they fixed the issue. I recommend this bike stand.
👤This stand is built for money. The stand is great and the reviews seemed positive. There is a Brad posted a review about sawing a bolt. The seller told you that it was two pieces. All you had to do was remove one of the sides. It's not hard to notice.
👤Excellent stand. It took less than 5 minutes to setup the bike. There is a The stand is very sturdy. The materials seem to have been put together. Time will tell if this stand holds up. Very happy with purchase so far!
👤I opened the box to find another one. I found another box when I opened it. I got to the stand after opening the box. These days, packaging like this says a lot about a company. I haven't even touched the stand yet, but I'm already impressed. What a stand it is! My photos don't do it justice, it's a master piece of aluminum and high strength plastics. You would be foolish to buy any other stand. It is peace... I'm leaving. February 2020 is an update. There is a This stand is ugly. There is a I am still assembling the tricycle and it has been holding it for a week. I can flip it without removing the bike. Good stuff.
👤I bought this to fix the bicycle my son received for Christmas. It was in need of a derailed adjustment and had wobbly wheels. There is a I was surprised by the quality of the stand and the instructions. I have a lot of mechanical experience and it's easy to assemble. It can be sturdy or wobbly, but it needs to be checked by the assembler. I had to tighten several bolts. There is a The knuckle where the bolts were bent was easy to fix using a Cresent wrench. This seems to be a problem between the packaging and the delivery schedule. I highly recommend this to anyone with good mechanical skills. If you balance the bike, or find the center of gravity, it's sturdy. Your bike is going to fall if you don't. I recommend this to people with a practical skill set that is worth a dollar. They could charge more. If you don't have practical skills, I suggest using the park bike rack or Park Tools. Thank you to the manufacturer for making this. Instructions for assembly and use should be written in a concise and clear way. You can post them on the internet.
👤When you bought the bike of your dreams, you spent the next 2 weeks dealing with remorse, and finally got to the point of I Love This Thing. The bike stand is very similar to that feeling. I spent a lot of time researching and searching for a cheaper dumpo and found one that was 100 percent better. The home mechanic needs a good stand. It takes common sense to operate, but it might not be the best option for those who can't change a light bulb.
You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality. The bike floor stand can be assembled in the same direction or opposite for parking your bikes indoors or outdoors. Depending on your space, the parking rack can be used for dual purposes. Stable and durable are made of high-quality steel and rustproof. Extra floor anchor brackets are available for increased stability when needed. The stable floor parking rack is easy to assemble. It is assembled by a single piece of rack so you can assemble as many bikes as you want. The Universal Bike Storage Rack is suitable for most types of bicycles and fits tire sizes up to 66mm. Enough bike slot space to safely store your bikes. You can assemble this bike rack quickly and easily after following the assembly diagram. A quick release connecting pin is required. It's much easier to store a bike on the floor. You can assemble this bike rack quickly and easily after following the assembly diagram. A quick release connecting pin is required. It's much easier to store a bike on the floor.
👤Not bad for a bike rack. It took me 10 minutes to assemble. It seems to be stable. I have a lot of bikes on it and they don't tip over. The only gripe I have is that some of the tubing didn't slip together very easily, requiring me to use a rubber mallet to get them together. The finish was too thick or the tube was slightly oval. The product information says that the slots can fit up to 2.6" tires, but my Specialized Stump Jumper has 2.3" tire in the back and it's difficult to remove from the rack. I don't see a 2.6" tire fitting without modification.
👤I bought a 5 bike version. The full rack is sturdy and easy to assemble. If you turn the front wheels all in the same direction, it's not a problem, as long as you park bikes next to each other.
👤I was trying to find a solution for our mountain bikes that ended up being leaned all over in the garage, so I bought this for the solution and could not be happier. It's surprisingly easy to assemble and move around in a small box. We have several 29" wheeled bikes with disk brakes. They all fit. 27'5" wheels are not a problem. If you want to get the best fit without interfering with the next, you can put the bikes in front or rear wheel. Would buy again.
👤The bike rack is cheap. I was able to assemble it in 5 minutes. It is stable once more than one bike is on it. It is able to hold a 29", 27", and 26" bike without hitting the brake disk or derailleur. It is able to fit 2.4” thick tires, but it may be difficult now.
👤I was worried that it would be cheap and wobbly once I put it together, since it includes a good number of pieces. It's not shaky at all. I use it with up to 2.4" mountain bike tires, and they fit perfectly. The total width is small and doesn't take up much floor space, but the spacing is decent and I can fit bikes in relatively easily with front wheels turned.
👤This is the best bike rack on the internet. Some designs leave damage after a few uses. Bikes can't be put in front-wheel first as the derailleur would touch. The slots aren't as deep, so this rack fixes the issues. It only makes contact with the tires on my bikes.
You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. The finish rails and sleeves hooks are coated with a powder. Bike storage solutions are perfect. A rail interlock design. You can display or hang your bike with 4 rails and 11 hooks. The snap-hook design of Torack makes it easy to adjust the hook spacing. 64 inches extra long rails are assembled. It's easy to organize and clean your garage with the torack bike racks. The wall-mounted bike rack and helmet hooks save space. There are wide size hooks for bikes. Hang up fat bike tires. It's suitable for mountain bikes, road bikes, folding bikes, hybrid bikes, adult bikes, and kids bikes, scooters, etc. Hanging up and taking down your bike is easy with wide size hooks. It's guaranteed to be safe. There are rails and sleeves coated with rubber. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction is used for safety loading. GS is certified. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included. It's easy to install, you just need an electric drill and a level to make sure it's lined up in a row for mounting on the wall. The wall collapsed in 16 inches. Installation of paneled wall sheeting must be located to solid structures. All installation hardware is included.
👤It's not particularly difficult to install, and seems to be holding our bikes just fine. Some reviewers have noted that the segments are not long enough to span across the two 16" joists. They are designed to butt up against each other. You have to angle the screws into the wall in order to be sure you get the screws into the wooden studs. If you have basic skills with a home drill, you won't have a problem. Would buy again.
👤I bought this item because I have two fat tire bikes and the item is advertised to handle them. The frame flexed so much that I took the bike off for fear of it falling, even though the hook fits the bikes' wheels. The only way I could use this item was to mount the frame and hook low so that the bike rests on the floor. A couple of garage hooks would have cost less than 10 dollars. I would have given the rating a zero if I could. It may work for kids bikes.
👤It only holds five bikes. You will have a hard time getting individual bikes off with that many. I drilled a hole on the top of the wall and added an extra screw because the track that mounts to the wall flexes in the center.
👤The product was given with bolts meant for brick walls. There was no information on the page or description. I paid $60 for a product that I am not able to use due to the bolts coming out the wall. Doesn't hold a kid bike.
👤The rack is strong. Only 4 full size bikes will fit on the rack, so it was a good decision to order it. It is still a very strong rack. If you don't put a stud in your wall, then you should use a larger wall anchor. Due to the weight of 4 bicycles, it will pull out of the wall with the help of the anchors.
👤There are 6 bikes that fit and one can easily access them. The caps at the end of the tracks look cheap.
👤It is easy to assemble and save a room. The item works for the studs on the center, but the trick is to hang the front and back tires at the same time.
👤The mounting screws don't align with the wall stud spacing. Some of the screws are in the wall and some are in the studs. The bike rack is ripped out even with the molly's. There is a It won't let me return this item, but I would like to.
👤There were only brick wall plugs. I had to buy a piece of timber and bolts to secure the stud behind the garage wall. Without taking a bike down first, access to helmet hooks is difficult. It's better to have them than not. I will buy another rack soon. It's useful to fit 12 bikes in less than 3.5 meters of wall space. There is a The hooks are fully down. There is a It is supposed to have lots of bikes in a small space.
The quantity is 2 pieces and the Rim is 3.3 inch. Koova Bike Rack is a sturdy, easy space-saving storage system for bikes and helmets. It's simple to mount on a garage or shed wall. The hooks hold the bicycle until you are ready to ride. Hardware needed to mount in minutes is included. The bikes should be resting on the hooks. Up to two helmets are out of the way when storing your bikes, so it's a good idea to store them neatly. The steel component is cut and powder coated. Their innovative design supports the bike's weight while rubber encased hook cradles are not damaging the rim, tires or spokes. Water bottles, tubes, and other items are on a utility shelf. All bikes are compatible. You can hold your road, hybrid bikes and beach cruiser in one spot. Ample space between bikes allows for quick dismount. Fat tires? There are 3”+ sized hooks available. Koova's Bike Storage Racks are guaranteed to last. They offer a lifetime satisfaction guarantee. They will repair, replace or refund your money if you are not happy with a product.
👤I have always stored my bikes in the garage. I started talking to the owners of the bike shops and looking at the line. The Koova system is the best of the best according to the other reviewers. The bike storage rack has a top gun. To me, the most important thing is the wide of the tire and the properly-angled hangers. The J hook design used in the systems I had seen looked less sturdy, complicated or worse, and it made mounting a two person operation difficult. The helmet hooks are an added bonus. Everything can be stored in a single location. I bought the six bike rack. Three children were riding their bikes at the time of the review. You might see tire marks on the wall now that bikes are mounted. Not a dealbreaker. I'm sure I can come up with a solution. I had a question about the ideal height of the hanger channel above the floor to accommodate my cruiser bike. Within a few minutes of sending an email on a Friday afternoon in July, I got a nice reply from the founder, Mr. M. Richards. I know I made the right choice because of customer satisfaction.
👤It's very easy to install and hold 4 bikes. I don't know how you can get 6 bikes on this rack. The extra brackets were used to hold tie downs. It's easy to move the bike off the rack.
👤It's the best on the market. This product is worth every dollar. I couldn't get 3 bikes to fit, so I was confused. The CEO reached out to me after I wrote a review and explained that the middle bike and 2 outside bikes are supposed to be handle bars up. You can maximize the space by doing that. It's rare to have a CEO. It is advisable to send a gift for the confusion as well as go to this level of customer service. I left a review for the Koova Garden Wall Mount. Another great product from this company. I bought a second one because I liked it so much. In the picture, I only have a small portion of the sets up. I put 3 bars together in each set. The 4th bar is on a different wall. This is by far the best unit out there. Is easy to mount and durable. I told you that I have 30 items on my wall. It is not even 2 full sets. It looks organized and not cluttered. A good one.
👤This was the easiest bike wall mount I have ever installed. It can fit 6 bikes top to bottom. We have a mountain and road and it is not an issue. The only thing that happened during installation was the head of the mounting screws being twisted off. It needs to find another one and mount it lower. An extra in the package would be nice.
👤This is an excellent bike rack. If I had ordered the 6 bike mount, it would have been sent as a set of 2 mounts that are about 32ish inches long. If you don't have the space on a single wall, you can mount in 2 different locations. There is a It came with all the necessary hardware. I put it into concrete. I used the same screws as the included lag bolts. It worked fine and did not cause any issues with the bike mounting hardware. It was very easy to install. I received a package in the mail that contained additional screws because there was a report of lag bolts sheering, which seems like a small company. I would buy again.
The maximum tire width is 2.8′′. The recommended wheel diameter is 29′′. The bike stand is made of square steel tubing and round steel tubing. The protective powder coated surface will prolong the service life. It is easy to exaggerate. You can mount the optional mounting system to cement with the package. The bike rack is fastened with strong bolts and washer lock nuts. This bike rack is simple and practical, and can be used outdoors. The structure allows bikes to be parked in the same or opposite directions to deal with the situation of bikes handling bars. The dimensions are 28.4''L x''W x 10.24''H. The wheel holder can fit all standard child, BMX, road and mountain bikes. It is possible to design up to five bikes. The bike rack is small enough to fit in a purse without taking up too much space. It is convenient for you to park and store up to 5 bikes at once. You can make bikes stand in this rack. There are no more bikes lying around in your garage. It is possible to design up to five bikes. The bike rack is small enough to fit in a purse without taking up too much space. It is convenient for you to park and store up to 5 bikes at once. You can make bikes stand in this rack. There are no more bikes lying around in your garage.
👤I needed a place for my kids to park their bikes so they wouldn't get in each other's way. I didn't want to buy something like this for a long time. The kids could use their kickstands. I finally caved in. I am glad I did. They park their bikes now so they don't have to worry about spacing them out. It was much quicker and more efficient.
👤It's easy to use a cheap organizational tool. Everyone is parking their bikes on my patio instead of throwing them on the ground.
👤I used this as a makeshift plate holder for my barbell weights. It is so stable. I have 200 lbs of plates on it and it is doing great.
👤The missing 4th cross piece can't be used for 3 bikes.
The laptop tripod stand is easy to carry. It's convenient for storage and carrying around. The projector tripod stand is easy to set up. The two bike rack is made of tubular steel and it is one of the best on the market. Quickly store 2 bikes with ease. No brackets, no clamps, no lifing. Roll the bike into the rack and walk away. Bikes can be stored in the same or alternate directions. SIMPLICITY Even children can use it. It doesn't get any easier than this. The finish on your rack will protect it from the elements for a long time.
👤The bike stand was nicely packaged and all the parts were there. The instructions were easy to put together. There is a The bike stand cannot be used with my bike. This stand will work if the outside of the tire touches the upper part of the stand, preventing the bike from going further into the stand's frame. The frame of the stand is too tall for the 700 x 28 tires on my bike. The bike stand frame will be against the brake rotor or rear sprockets. There is a Even if I used it for a rim-brake bike, the rear sprockets would still inevitably hit the stand's frame. I think the stand is strong and could be used for bikes. It won't work with all bikes if there are no adjustments built into the stand's design. I will either have to return it or modify it.
👤I almost didn't buy this rack after reading all the negative reviews. I'm very happy I bought it. It comes with instructions, and they were helpful. It took me less than 30 minutes to assemble this rack. The parts were in a box. There were screws in the bag. The parts are described with ease. I said that in the title. Take all the critical reviews. This was easy to assemble. I put it in a configuration that was side by side. I thought this would work well for us and that was the only other option. We have bikes with wide tires. They are called cruiser bikes. We tried to fit the tires into the bike rack, but we couldn't because they were too wide. The tire rack is very secure. One of our bikes has a front wheel. The back wheel is in the rack. The handle bars make it impossible to put them in the rack with their front wheels. I am very happy with the purchase.
👤I build stuff for a living. When you hear "made in China", you think of a bike rack. The small parts list doesn't match what's in the package. The bolts are all the same length. You need a standard wrench to assemble. You don't need a 10mm sockets with an extension. The center bar was too short when I put the rack together. Had to disassemble and reassemble in a different order, because the stanchions at the wrong angle forced the bolts into the top end of thestanchion supports. I had to use a mini sledge to get the thing to sit on the floor after the final tightening of the bolts. The only job it does is to hold a bike upright. I was not going to have to go through the hassle of returning things. If I bought something like this to hold my bike on the truck or the roof of a car, there is no way I would keep it.
If you have a problem with this bicycle stand, please contact them before leaving a review, they will offer you a solution within 24 hours. Not compatible with e- bikes and bikes with tires that are larger than 2.2INCH. The push-on system securely holds bikes with tires 1.0- 2.2INCH wide. Compatibility with road and cyclocross bikes, mountain bikes, hybrid bikes, beach cruiser and kids bikes with 20 and 24 wheels. It is made from high strength plastic and high strength steel, so it will last. You can hide it away when you travel, or throw it in your trunk.
👤The quality of the bike stand is very good. I unpack it and use it right away. I put my bike on it and it fell very secure. I have a hybrid wheel bike that has a tire that can fit in the stand. I don't think it will fit the tire. I use it for both front and rear wheels. The bike stand is great.
👤The bike stand is very sturdy and lightweight.
👤Good quality and easy to use.
The vertical height from the ground will be different due to the different bike frame structure. Measure the vertical height from the installation point to the ground to make sure it fits your bike. The scale value range is between 22 cm-26 cm. The bike rack is easy to install. You can take the rack apart when it's not in use. This bike storage can keep your equipment in order. It can hold up to 3 bicycles. The top shelf basket is a great place to keep footballs, baseballs, basketballs, gloves, etc. The four side hooks are perfect for skateboards, balance boards, and tennis rackets. The bike rack can be used indoors or outdoors. It is great for many places. Most types of bikes are easy to put into this bike rack. The bike rack doesn't need to be installed on the wall, so it can better protect your families and cherished bike from hurting or damage due to hanging. The bike stand is made from sturdy steel with black powder coated finish. If you have a problem with this bicycle stand, please contact them before leaving a review, they will offer you a solution within 24 hours. If you have a problem with this bicycle stand, please contact them before leaving a review, they will offer you a solution within 24 hours.
👤I am ok with the garage being a main entrance if it's neat looking. We don't have a lot of space in our garage, so we use the rest of the garage for storage. The bike rack really makes the area look better. My son's bike doesn't have a kick stand, so I am happy it now has a place to go, and I no longer have to go over it in the middle of my path. There is a The instructions were vague, but my husband put it together in 1.5 hours.
👤This product is for people who like screaming expletives in their garage. The bike rack will arrive in 40 unlabeled pieces, which will allow you to solve a lot of riddles. The writers of the assembly booklet did not communicate clear directions within their written instructions, so you will need telepathy to determine proper assembly directions. If you don't have those, you can do what I did and throw the pieces around in a rage until they come together to make a functional rack. There is a The scooter is held up nicely by the rack. For the price, I would have expected more.
👤I've been wanting a bike rack for a long time. I'm happy with this one. There are a few pictures of the instructions to assemble. It takes some time to figure it out. It took almost an hour. I think 2 people should out this together. I use it for my mountain bikes. The storage area is large enough to hold all my bike equipment. I would recommend this rack to anyone.
👤The directions were useless. The video in the photos of the product on Amazon helps. It took 45 minutes to put it together. One side panel needed to be wedged on, but once all other parts were installed, it was a very stable rack. I love having the extra rack and hooks to keep my gear. If you are a patient, you can put this together.
👤The product is sturdy and looks great once assembled, despite the pain in the instructions. They need to figure out their instructions before I buy another one.
👤It was perfect! We love the top rack and need something to organize our bikes. For a smaller rack, it's very sturdy. Ice added a feature to hang inline skates and our skateboard. Highly recommended. The price is great.
Their first priority is your satisfaction. If you have a problem, just leave a message and they will find a solution that will make you happy. Large capital: The garage wall mount bike rack could hold up to 300 lbs. Bike storage can be tailored to fit your needs by attaching space to the rail. There is safety. The sturdy safety hook design is ideal for your garage storage. The bike storage rack is easy to attach and move around on the rail. Heavy duty mounting hardware. Bikes are not included in the kit for wood stud,drywall,create or brick wall. The material for resilience is powder-coated steel. The sleeves are scratch- resistant. The steel construction has a finish. The material for resilience is powder-coated steel. The sleeves are scratch- resistant. The steel construction has a finish.
👤I was able to fit 6 bikes by alternating them. I would recommend installing on the studs. If you like clean walls, you may want to put up a sheet of plywood. The bikes will leave tire marks on the wall.
👤They make things look better. We have a large family with a lot of bikes. They are perfect.
👤This was purchased to hold four bikes in our garage. We have six bikes, but there is no way you can put six of them on this storage rack. Unless you have three bikes for 5-year olds. It is 4' across, and even if you put the bikes on it alternating front and back tires, it would be hard to get six across. I'm sure the manufacturer will say something different. There is a I had to put in some framing to make it work because my location was not on a wall. If I mounted this on the wall, I would recommend putting some tires pre-painted on the wall to protect it against tire marks. To keep the bikes vertical, I'm going to install a couple of 1.5 inch diameter pipes across the railing. There is a The instructions were very bad. My instructions show that this mounting rack is sold with garden tool hooks. There is no mention of how high to mount it, no mention of locating a stud so it can carry the weight of all the bikes you plan on hanging on it, just vague sentences. If you are going to mount this on a wall, I would recommend putting a strip of 1 x 4 across three studs with 3 screws going into the studs. The bike rack can be mounted to the 1-1/8" x 4-1/8" hole. I'm not sure how much stress this puts on the rim of the tire since it is carrying almost all of the weight. It isn't bad for the price.
👤The bike rack is perfect. It comes in two pieces. I put a 24 inch rack in one location and hung 3 bikes there, and the second 24 inch rack is available for 3 more bikes in another area. The mounting screws and plugs are provided in the instructions. The garage I have has a plastic garage tech wall panels which I did not need the plugs for. I installed both pieces in 15 minutes. There is a The rack and steel distribute the weight evenly. If you use a high speed drill with a screwdriver bit, be careful with the screws as they can strip. The hooks are larger than I expected. I hope you are as pleased with the rack as I am.
👤How well the plastic anchors hold up in a Florida garage? I installed it by the instructions. It is 24 hours later. I said this to my wife last night.
👤Did not have enough screws or anchors. The anchors it comes with are for brick walls only. If you want to hang this through a dry wall, wood or anything other than brick, you need to purchase your own anchor and screws. I used a very strong anchor and screw for the drywall that can hold up to 250 lbs per anchor and with 3 kid bike's on one pad, it was too heavy and pulled several of my anchor and screws out. The metal surrounding the screw hole was broken when it pulled my anchor out. I don't recommend this product until they provide customers with the appropriate hardware. It took us an hour to install and another hour to pay for it. I'm not happy.
Bicycle stand for garage products from Pro Bike Tool. In this article about bicycle stand for garage you can see why people choose the product. Bike Hand and Cxwxc are also good brands to look for when you are finding bicycle stand for garage.
Pro Bike Tool, Bike Hand and Cxwxc are some of the best brands that chosen by people for bicycle stand for garage. Find the detail in this article. Xcsource, Torack and Koova are also brands that their products are worth to check.