If you have any questions during use, please send an email to them at any time, they will help you solve the problem in the first time. The bike floor stand is made of high quality steel and has 4 corners covered with rubber cap to avoid scratch ground and reduce noise. It looks like it matches your bike. It can make your bike stand up. All bikes are fit. The bike stand will fit almost all bikes, except those with the tires more than 2.4" in width. If the fender is too long, just swap the front and rear position wheels. There is space. The bike stand is free of floor space. It's perfect for an apartment, dorm room, a garage with too much stuff in it or other limited space. The length is 21.65in, the width is 20.86in, the height is 44-50in, and the width of the tire track is 3.93in. The weight is 3.8 kilo. The portable multi-functional bicycle parking rack is easy to carry and install. The bicycle can be parked vertically or horizontally with the product manual. The length is within 1240mm. The bicycle storage stand height can be adjusted up to 50” after assembly. If you have a question about the product, they will try their best to help you. If you have a question about the product, they will try their best to help you.
👤It allows your bicycle to take up less space. There is a It seems like it is stable holding my Cannondale Quick 4. The price was reasonable. There is a Shipping was fast. There is a It wouldn't fit together because of the bent lower brackets. The box the manufacture shipped it in was in perfect shape and as hard as it was to bend (hammer and a block of wood) back into the correct shape leads me to believe it was packaged already bent. Many people would have exchanged it. There is a I suggest you buy the LuBanSir Cinch Straps, which are 2 x 18 inches, to secure the wheel to the stand. If it had arrived undamaged, I would have given it five stars.
👤I ordered 4 of them. The item works well and does not require drilling into the wall. It gives flexibility. Some manufacturers have quality problems. The screw may not line up, the metal may not be removed to make a hole, and in one package a shorter screw was provided instead of a longer one. The plastic bag was made poorly. The produce's function is not impacted by these issues. The design is good. They did not find a good manufacturer.
👤The old stands wouldn't work with the new bikes, so we bought 2 new stands. They were one of the few that could hold the weight of the e bikes. The stands could accommodate the bikes with the handlebars facing to the back or the front. There is a A cap wouldn't stay on the intended piece when one of the stands arrived. I gave the company the order number and a picture, but they haven't heard from me after 3 weeks. I would have rated this bike stand a 5 star if it wasn't for this glitch.
👤The bike is extremely unstable due to the poor illustration of instructions and the fact that the 2 piece pole was put into wrong position when drilled. One tap and it falls down. I have a smaller version of this bike stand that is different from the one I have now. All the parts are the same. It sits perfect but not for a 29" tire which is what this one does, and it is very disappointed on just one part that could make or break this stand. I'm returning it because of the lack of support from the manufacturer.
Light weight is only 6 pounds, but performs like much heavier. The bike floor stand can be assembled in the same direction or opposite for parking your bikes indoors or outdoors. Depending on your space, the parking rack can be used for dual purposes. Stable and durable are made of high-quality steel and rustproof. Extra floor anchor brackets are available for increased stability when needed. The stable floor parking rack is easy to assemble. It is assembled by a single piece of rack so you can assemble as many bikes as you want. The Universal Bike Storage Rack is suitable for most types of bicycles and fits tire sizes up to 66mm. Enough bike slot space to safely store your bikes. Assembly is quick and easy. You can assemble this bike rack quickly by following the assembly diagram. A quick release connecting pin is required. It's much easier to store a bike on the floor. Assembly is quick and easy. You can assemble this bike rack quickly by following the assembly diagram. A quick release connecting pin is required. It's much easier to store a bike on the floor.
👤I needed this product to organize my bikes. I spent a lot of time looking over various bike racks on Amazon and am very happy with my purchase. We have chubby 29" tires on our mountain bikes that fit nicely without getting in the way of the disk brakes. I would buy the rack if they made one for fat bikes. There is a If I'm pulling one of my bikes out of it, I have to use my foot to keep the rack in place, but if you want to screw it to a stable board so it doesn't move when pulling bikes out, the pieces needed to do so are. It can be moved easily to the yard for bike washing. It's very easy to lubricate my chain while the bike is in this rack. I love it!
👤One of the pieces with upcurved tubes that are welded to the base was the problem until the middle piece. One of the upcurved tubes wasn't fixtured correctly so that it was too close to the other tube and slightly skewed from its proper axis. Since the tubes were not perfectly aligned, a rubber mallet was needed to place those final sections. There is a There are not small extension tube pieces available for purchase in order to separate the bikes from each other, when a mount for two bikes is all you need and you want to put the rack into the back. I want to do that. The 3-bike version is too wide for my vehicle. The 2-bike rack + extenders would be a perfect fit for that transport application if there were extender tubes available.
👤I needed a 3-bike rack to hold my bikes in my small yard shed. The bars are of high quality and the dimensions were true to size. It's easy to put together and install. It slid under the brackets as I slid in bikes because it was installed on soft rubber. I secured the 2 brackets with instructions on the left and right. I wrote to the seller of Loveliness-US and asked if I could purchase additional brackets to keep it in place. They responded quickly and sent me 2 more brackets. It doesn't move anymore. I was looking for a very affordable and high quality product. I think it's a good idea to recommend 100%. Mandi is in Washington DC.
👤It is reasonably priced. It is easy to assemble. It is stable enough. If I used the included brackets to attach it to the floor it would be impossible to move. The bikes are close together. Not a dealbreaker. It is possible for the brake cable from one bike to be caught by the handlebars of the other bike. When putting a bike in or out of a rack, pay attention.
It isdurable: The bike workstand was released to the market for a long time. One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack. Bike storage is space saving. The Michelangelo 2 bike rack garage uses gravity to secure up to 2 bikes. The assembly was easy. The Michelangelo garage bike rack is easy to install. Assembly Hardware and a wall strap are included. In Minutes. Arms Accommodate Any Bike Size Or Style, Up To 40Lbs. The support arms are repositioned with a simple twist, which makes it easy to adjust. This large capacity vertical bike rack is made of quality steel and holds up to 2 bikes and a total weight of 80 lbs. The rubber feet keep the bike rack in place.
👤I had high hopes for this bike rack. The stand will work perfectly despite the flimsy look, according to all of the reviews. Wrong. I have a small hybrid bike. My boyfriend has a bike. We could not get the bike to hold the bikes in place, which is a reasonable expectation for a small and Medium sized bike. There is a The older reviews seem to have been before the materials were changed. The rack I received had no red details. The grey grip that should hold everything is meaningless. When we put a bike on the rack, the arms that are on the frame start to slide so that both arms are on one side, and the bike slides over and one tire rests on the floor. Adding a second bike on top is a bigger disaster as that bike does the same thing and it rests a tire on the bottom bike, looks hideous, and I might as well have leaned the bikes on the wall. I tried spacing the arms further apart, swapped the bike places, but with the arms sliding wherever they please, it just wasn't working. It's a hassle and a waste of time to return it. I was looking forward to being able to store the bikes indoors, but I'm disappointed. The search is on.
👤It doesn't seem like it should work, but it does and it's amazing! It took a couple minutes to put the stand together. It leans against my wall and takes up very little space. I think it looks cool that I can get my bike up and out of the way. Everyone is surprised when they first see it and they have to touch it to believe it's strong. There is no chance of the stand tipping over because the bike is pulled towards the wall. I think this is a cool, well designed product and would recommend it to anyone looking to free up some space and store their bikes.
👤I don't feel very enthusiastic about this stand. It does the job, but has some design flaws. I'm not sorry I bought it, but I probably wouldn't buy another one. It does get the job done and is cheap compared to other bike stands. It was not easy to install the screws. The two pieces were not aligned correctly. There was no way to get the angle right to screw it in. Since gravity keeps the top piece on its own, I have set it up with a missing screw. It has not collapsed in 2 months. There is a The feet are not very stable. I have it on a hardwood floor, and I have noticed that it slowly slides forward over time. I have had to pull down my bikes, adjust the rack, and replace them twice because it had slipped too far for comfort. I might need to change the shoes for it. If I'd secured the top part to the wall with a screw, I might not have had this problem. There is a The bad news is that it doesn't hold my bikes well. The handles stayed put after I arranged them. The first day was rough, and I had a hard time getting the handle positioning right. Your bike's geometry and weight distribution will affect the relative heights of the handles. Try to angle them as far out as possible. I wish there was an extra piece to keep the front wheels in place, because they can turn and damage the wall. I rigged up a utility hook between the top front wheel and the wall to prevent this, but it's a little awkward. The utility hooks are not made for this purpose and are a bit too short, but they get the job done with a bag hanging off it. There is a It's a decent product. It works, but not fancy. It's cheap.
You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality. The Sunix bike storage stand has a bike slot that can be adjusted in 3 different ways, from the largest width 4.2" to the middle 2.5" and the smallest 1.2" to hold all types of bicycles. This bike floor holder is more than just a bike holder, it's also a garage organizer, with an extra-wide basket and 6 hooks for storing sports equipment. There is a wonderful bike rack for garage storage. The bike rack is made of high quality steel, high temperature baking paint, and Rustproof. Enough bearing capacity to keep the bike rack stable. It's perfect for indoor or outdoor use, garage, front yards, backyards, basement, storefront or any workplace. The height can be adjusted with a 4 foot pad. It's easy to assemble this bike rack, it's just a matter of following the assembly diagram and putting it on the floor. It's easy to assemble this bike rack, it's just a matter of following the assembly diagram and putting it on the floor.
👤The bike stand is sturdy. The assembly directions and materials were excellent. The product description for the width of the bicycle slots uses the word 'adjustable', which is not right for me. The term 'adjustable' means that the width can be changed continuously using a lever or other means. When assembling the stand, it is important to choose which width to use. Changing the slot requires undoing some bolts and moving one of the vertical rods. The middle width is the one to use for a road bike. I have two bikes on the stand, with the middle width for the bicycle slots on the two ends of the stand. It works well.
👤I have been looking for a rack to hold three bikes. Triumph! The rack is made to fit in your purse. I had the rack assembled and the bikes stored in a short period of time, freeing up room and reducing the risk of damage due to poor storage.
👤This is a nice bike rack. The box is easy to assemble and can hold two full size adult bikes on the two outermost slots of the rack. I have two bikes to store, so I haven't tried placing a third one in the slot backwards so that the handle bars don't collide with them. There is a The frame of a mountain bike or other bike with fat tires is easy to hold. There is a The metal is very light and that's the reason for 4 stars. It feels like a lightweight metal. This makes it easy to put together and move around, but it also leads to some bending of the frame during installation when installing the screws, and time will tell how well it stands up to the elements. I wouldn't trust the frame to stand up to a bolt cutter in a location where theft is a concern. All in all, very pleased with the purchase. It's nice for the price.
👤I thought I'd try the bike rack because we were propped our bikes against the house. I've had no instability issues with the 3 bikes on it, it's not mounted to the ground. There is enough room for a mountain bike and a beach cruiser. You can choose between narrow slats for narrow tires or wider slats. I chose wide slats and the tires were stable in the space. The basket on top is useful because we can keep tire pump or bike covers folded up. I haven't used the hooks on the sides yet, but I love the sturdiness andVersatility of this product. The price was great. Assembly was easy, but I found I needed more space than I thought. The price was great. I would recommend someone.
Bicycle repair tool kit. Chain rivet extractor, chain ring nut wrench, Crank puller, Freewheel turner&lock ring wrench, Bottom brachet wrench, 15mm pedal wrench, 2-in-1 master link chain pliers, Tire lever, Flat/phillip screwdriver, Flathead screwdriver, Hex The bike stand has a one-pull-knife design. The dual arm design securely holds the front wheel of the bike. It is easy to store the arms when they are not in use. The design is lightweight and compact. Stand is less than 6 lbs. A rubber handle with a powder coated finish.
👤I would love to hang my bike in my apartment, but I was not allowed to. I got this instead. I found a way to secure the front wheel to the frame with a strap. The front wheel and front handlebars don't move. I put the back wheel in the stand and lean the front tire against the wall. The front tire is the only one that touches the wall. The handlebars don't touch anything because the stand is stable. It won't fall over if I throw pillows hard. It's pretty sure it will survive an earthquake. There is a The stand is strong. It's half the price of the other ones. Would recommend.
👤Sturdy construction for money. I own a Salsa 29'er. If I removed the tire holder and one of the spacers from the side, I found it fit better. It is easy to work with an Allen wrench.
👤I was worried that it wouldn't work or that it would break on me. There is a It fits my bike perfectly, either with the front or rear tire. There is a After a quick and simple modification, my tire size is 27 x 2.6 inches. I just took the plastic spacers out of the middle. I needed a wrench and Allen. Check out the pictures to see what I'm talking about.
👤It does its job for $12 less than other makes. There is a Handle it with care if you read the instructions. It will break if you try to force it in a way that is not supposed to happen. It is held with cheap, light-duty rivets. I replaced a broken rivet with a heavy-duty rivet. If you have a pop rivet tool, it only takes a minute. I'm thinking about replacing all the light-duty rivets with heavy-duty ones. The savings will probably be wiped out by that. Doh!
👤It is simple, inexpensive and works. There is a It's great for children's bikes. There is a It's not strong enough to support a men's bicycle. It was knocked over when someone walked by. If you did not balance the bicycle in the holder, it fell over. When the bike fell against my wife's car in the middle of the night, it was very annoying. There is a I made a simple modification and it works great. There is a My bike won't fall over even when someone hits it hard. I attached the hardwood supports to the bottom with screws and the metal supports to the side with screws. Very easy! It made a huge difference in the support of an adult bicycle. This modification is not needed for a child's bicycle. There are photos below.
The maximum tire width is 2.1′′ and the recommended wheel diameter is 29′′. The Canaletto four bike rack garage is safe for up to 4 bicycles. The Canaletto garage bike rack is easy to install, you just need a screwdriver. Assembly hardware is needed to build a bike rack. Arms can accommodate any bike size or style up to 40 lbs. This rack is easy to adjust once assembled because the support arms are repositioned with a simple twist. This large capacity vertical bike rack securely holds up to 4 bikes and a total weight of 160 lbs. The rubber feet keep the bike rack in place. Over 200,000 cyclists trust Michelangelo bike storage racks. Delta is the brand you can trust with best-in-class U.S. based customer support.
👤This item works well, I needed it to help with my bicycle storage. I saw a "Wobble" when I removed the bike from the top. Otherwise works well. I'm 6'3 I have between 40 and 61 cm bicycles. All fit on the rack. I had enough space to work on my road bike. Would buy again.
👤The 4 bike version is stable, easy to put together, and is easy to improve with anti-slip wrap. The weakest point in this design is the low quality screws strip after first install.
👤The spare room of my apartment was cluttered with bikes, which is why I got this bike rack. This has given me more room. I have a mountain bike, road bike, hybrid bike, and 29” mountain bike all on the rack. They all fit. It is easy to load. I don't feel as if my bike is sturdy when I ride it. It is best to get all of the bikes on before you decide where the little basket is located. The hooks that hold the bike are not screwed in, instead they hook around the uprights and can be moved wherever they are needed. I had to move the basket because it was where I needed one set of hooks. I am very happy with my purchase so far.
👤I put all of the bikes on it myself. I like it. It frees up some space in the garage. I got the one with the basket that fits two helmets, but you could put other items there. I didn't give 5 stars because it isn't fully flat on the ground, and the "O rings" that they give you to level it weren't enough. I'm not afraid that it will tip over, it's still sturdy. Overall, I am happy.
👤I wasn't sure about this rack, but it was easy to assemble and hold our bikes. I put a 10lb weight on the rack because it gets bumped in the garage and it doesn't need any extra bracing. Really good rack. Would recommend.
👤I love it! I'm happy I bought this. There was a lot of space for all of our bikes. I'm very happy!
👤This is a great space saver. There are no holes in the wall that can hold up to four adult bikes. We had to drill a hole in one of the pipes to get a screw. We put it together. Highly recommended! It's easy to move around with no bikes on. If they were on the floor against a wall, would they take up more room?
To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you. Space-saving, Multi-occasion use. The base of the bike stand is higher than the upright bike rack, freeing up 4 feet of floor space. Storage is easy to outdoor and indoor, including garage, apartment, living room, bedroom, park, gym, workshop, warehouse hallway or other narrow space. The design is safe, steady and labor-saving. It's easy to put the bike on the floor stand rack. The upright bike stand has long support legs and a higher base to protect the floor from damage. This will be more stable in windy weather than other rack bases. Easy Assembly andAdjustable Height. Independent floor stand bike rack, fiting for different indoor heights, without drilling and will not scratch any walls and ceilings. The red rubber hook keeps the tire in place and makes the bike stable. The screw can be adjusted according to the size of the tire. Installation can be completed in a few minutes with a detailed manual. The stability of the vertical rack is better than the rectangular base, which is not easy to tilt or shake. You can store the bike vertically or horizontally. The max vertical height of the rack is 1290mm and the max tire width is 2.42”. The surface of the upright bike rack is evenly coated with high-quality steel and powder spraying technology, which makes it rust-proof. It can maintain excellent state, long-term use and stability. The product has undergone at least 3 quality checks. They support a return service guarantee if there is any unhappiness with the product. The surface of the upright bike rack is evenly coated with high-quality steel and powder spraying technology, which makes it rust-proof. It can maintain excellent state, long-term use and stability. The product has undergone at least 3 quality checks. They support a return service guarantee if there is any unhappiness with the product.
👤We bought 3 of these stands. I have tried other carpets but they did not offer the stability I was looking for. We didn't want to hang our bikes on the wall, so I wanted to try this stand with the wider stability legs on the carpet. It works well. The legs are easy to put together, but if you put them on a ceramic floor, the stability would be even better. Very happy with the product. Excellent organization.
👤I tried to assemble this after a long day. I needed some close up pictures of the rack to understand the instructions. Does the red piece stay on? Some pictures it was on, some it was off. It stays on. Getting my bike onto the rack and figuring out my adjustments was a challenge. Those are all the negatives. I got it together and adjusted it. It works. My bike is now in the stand vertically, with a rack on it. It saves me some space in my apartment. All is well that ends well.
👤The only negative thing about this product is the cheap aluminum nits and bolts. There is a I had to adjust the pads for the rear tire on my 29er MTB because it wouldn't go through and get stuck. It turned out great once I figured that out. I would definitely buy this product.
👤The build quality on this is not good. Half of the bolts don't line up. I needed a metal file to make them bigger so I could get the bolts through, but the metal on the bottom of the stabilization bar was too wide and the bolts were too short to pass through it. The holes for the spring loaded pins that attach the legs to the base were positioned so that the clamps that hold the bike wheel to the base pushed the pins in and made the legs unstable. These issues make it not safe or stable. I have it wedged between a couch and a corner, but a stiff breeze would blow it over. I don't think this is a good idea.
👤The tire stand has quick release buttons. The tire holder brackets could be interfered with by the quick release buttons. The installation felt flimsy, but it is doing its job.
👤I had to use gorilla glue for the pieces to be stable and not wobbly even though I tightened things. I have to lift the bike a bit to put it in, otherwise it will slide across the floor until the wall stops it.
No hooks, straps, bars or other equipment is needed. Installation and mounting hardware is included. It's alright. The oxidation process makes the surface glossy. The corner has a coating on it to protect it from nicks and scratches. The arm is spring loaded so it is easy to hold the wheel. The bottom has padded feet to protect the floor. The stand can be folded into a flat shape with a single pull-nob. When folded, it's an inch x7.16(W)inch. Storage can be carried into the car when not in use. Your bikes will not be lying on the ground anymore. Push is quick and easy. The patented design will hold your bicycle steady. Set-up and fold for compact storage to save space. The stands have only one or two points holding on the frame, rim, disc rotor and derailleur, but the 4 points on the tires are much better than that. The bike's front wheel is deeper in the holder than other bikes, so it stays in the holder. It is better to have a dual arm stand than a single arm stand. The bike rack is universal and can be used for many kinds of bikes. It is suitable for 650C - 700C Road Bikes. Bikes with tires more than 2.56 inches are excluded. It is strong enough for all types of bicycles.
👤The product description says it has indoor cycling. It's only a stand. You cannot use it for an indoor trainer.
👤I'm not sure if I'm missing something, but I don't understand the reviews for this stand. It's mediocre in the couple days I've been using it. It's difficult to lock my bike up because it slides all over the place. I think I have figured out how to hold it in place while I load the bike, but it's awkward. I could live with that, but it doesn't hold the bike up very well. I wanted something to set my bike up. That's right, if there is a slight change in weight distribution, that's when the whole thing ends.
👤Not impressed with this. I bought this stand for my mountain bike because it has wide tires. When I try to load the bike into position with the "foldable feet", they fold and the stand twists, and the front tire will not lock into place. I will have to make some changes to my feet. I have other bike stands that are easy to use and hold the bike. This one leaves a lot to be desired. May be junking it. It was an expensive mistake.
👤I love this bike stand. It works great with my bikes, which range from 27” to 29” tires. It is a great price and you can't beat the convenience of this product.
👤It can be folded when not in use. I don't like the fact that it folds and there's no way to lock the arm in place making it hard to put the wheel in. If you need to store it, it folds into a small size. The bike is held steady once you get it in the stand. The folding arm is the only nit. There is a bike room in my condo and the bikes are stored against the wall. It can be difficult to get next to your bike to push the arm forward to put the wheel in. This would be the perfect stand with more room.
👤Not a good fit if bike has knobby tires even though the width of my tires should fit, so tire will sit down into holder. The side supports tend to fold in when trying to roll a tire. Side supports should be wider. The whole stand slides forward and side supports collapse if the top roller guide is not pushed back by hand.
Don't need drilling, no damaging walls or ceilings, it's easy to assembly. There is no scratching on the bicycles. Store your bicycle quickly and easily with the included screws and anchors. The bike stand is a space-saving design that allows for portable storage in multiple indoor and outdoor locations. Store according to your needs. The upright bicycle stand can fit almost all 20”-27” bikes with full mudguard when store vertically and horizontally. There are 26”-27” mountain bikes, 650c-700c road bikes, and 20”-24” kids bikes. The display size after installation was 21.65” in length, 20.86” in width, and 44”-47” in height. angular structure andign quality The brackets form a stable triangular structure with ground and the top hook fixes tire. Four non-slip rubber supporting feet will not scratch the floor. The surface of the upright bike rack is coated with high-quality steel and sprayed with excellent powder spraying technology. It can always maintain excellent state, long-term use and stability, even in humid or windy weather. The vertical bike rack is easy to assemble and will keep the room pretty and tidy. The package has an instruction manual that is easy to install in a few minutes. To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you. To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you.
👤The stand is easy to assemble. I ran into a problem. The arm wasn't long enough to reach inside the rim of the front wheel with either my mountain bike or my road bike. My road bike is an older steel frame Lemond, and my mountain bike is a Trek Marlin. The catch for the rim was only half way up the front tire, and it wasn't long enough to fit on a road bike with 50mm deep rim. I didn't fit the rack that I had so I really did like it and wanted it to work. It would be a great stand for smaller bikes or road bikes.
👤I got this for my college apartment since our common area is low on space and my bike wasn't helping. I couldn't drill into the wall, so I had to use the ground system. I'm happy to say that it works well. It is perfect for my Vilano Diverse 3.0. It holds it well when I put my bike in. It's easy to take it up and down. There is a The instruction manual is one of my only complaints. It's too small. I had to take a picture of the manual and zoom in on my phone to get a good picture of it. Is it too much to ask for 12 pt?
👤It's easy to put together, stable, and works great in the garage for our bikes. The only way to hang those bikes is either a complicated ceiling/pully system or a front tire wall hanger that orients the bike 90 degrees from the wall and not saving much garage space. The hanger can sit parallel to the wall. The front tire support is great, so you don't need a strap or anything to keep the front tire from flopping around, and the bike feels very secure in the vertical/upright position. It works well with my wife's smaller bike. There is a The directions are printed in a small booklet. All the tools needed were supplied. It took me about 10 minutes to put it together.
👤It's really good for tight spaces that the stand is sturdy. I use it with my road bike. I haven't tried it with a fat tired MTB. There is a The front part of the stand has a red piece of plastic that is like an inverted V shape and I would improve on that. When you roll your wheel onto this piece, it can divert your wheel off to the side. It would be better if they made this into a shape channel that helps guide your wheel into place.
The bike repair stand can be installed on the wall or work bench. It takes up less space by locking in place against the wall. The multi-use bicycle stands are designed for both bike stand and home floor parking rack. You can use it for simple bike maintenance. It's a good choice for mountain and road bike storage. The repair rack structure is made of heavy duty steel which makes it sturdy and easy to use. Simple, portable, durable, space saving and easy to use. Anti-Scratch Hooks. There are 7 holes in your bike. It will work with all types of bikes. The rubber on the hooks protects them from being scratched. The install instruction will show you how to install correctly step by step with free basic tools inside of the package. 60-days money-back and 24 months warranty are offered. They are confident that you will love their barbell clamps as much as they do. If you have an issue, please contact them. They will make it better by learning from your experience. 60-days money-back and 24 months warranty are offered. They are confident that you will love their barbell clamps as much as they do. If you have an issue, please contact them. They will make it better by learning from your experience.
👤I needed a simple and inexpensive way to hold my bike up while I changed the tire and this stand was perfect. It did the job without any issues. Very happy.
👤The bike stand is sturdy enough to keep your bike upright. It's great for everyday use.
👤It's flimsy and shaky. It will hold the bike precariously. It won't do as a repair. The stand is up.
👤The stand is perfect for my Revolt 3. It's useful when performing simple maintenance because of the sturdy parking.
👤I paid more and got less than I expected.
👤The long legs are so cheap that they will bend. Make sure the bike is light. Won't ride my bike.
There are 2 cleats, 2 cleat washers, and 4 cleat mounting bolts. The all tubular steel frame is sturdy and can be anchored to most flooring. The black powder coated surface is Rust resistant. The stand can be adjusted by adjusting pad thickness to prevent the floor from scratching. It is possible to hold a maximum 26” tire and a maximum 2.0” tire. The assembly is happening No anchoring hardware is required, holes are in place for anchoring. The assembly is happening No anchoring hardware is required, holes are in place for anchoring.
👤Exactly what I needed. I keep both of my bikes indoors and well-maintained as I ride 888-349-8884 The stands are the perfect size for a good price. I thought about it. They are very sturdy, hold both my hybrid and cruiser, and the simple rubber height adjustments on the feet are very useful, because one bike was leaning on the floor, and I had to adjust one side of the rack to the highest level. They were delivered a week and a day early and no assembly was required.
👤The bike rack was on sale. It doesn't do a good job of keeping my road bike from falling over. It doesn't work on the front wheel, and with the rear wheel in the stand, it has to be balanced just right. I worry about the spokes being put under too much pressure. It was fine for keeping the bike upright as I did things like take the brake calipers off and replace the closed cell foam. I haven't tried it with my mountain bike, but I think it would work well with a kids bike or a 24" wheel, and I think the kickstand is unnecessary. If I had paid full price, I would have sent it back, but the price I paid suffices for my purposes. The strength of the metal and how it's made makes it a good candidate for high sturdiness.
👤This was perfect for my mountain bike. I wasn't sure but it is stable after reading other reviews. Also, a good price.
👤I couldn't see it in the pictures, but as soon as I tried to stand a bike in these, it was obvious that the bike is too heavy. The only thing holding the bike up is the supports. A gentle push of the bike to either side would cause the spokes to break. Do not buy these if you own a bike.
👤Since my bike does not have a kickstand, I needed a rack to hold it up. The gem does the trick. Even at an angle, it holds up my bike. The design of the floor prevents scratches.
👤I needed this for storing my bike. Why didn't I buy this design years ago? I unboxed it, put it on my floor, rolled my bike in, and it worked!
Bicycle stand floor products from Eocik. In this article about bicycle stand floor you can see why people choose the product. Xcsource and Delta Cycle & Home are also good brands to look for when you are finding bicycle stand floor.
Eocik, Xcsource and Delta Cycle & Home are some of the best brands that chosen by people for bicycle stand floor. Find the detail in this article. Sunix, Maxxhaul and Begona are also brands that their products are worth to check.