Best Bicycle Repair Stand Clamp

Stand 20 Aug 2022 10+ Comments Open

1. ONETWOFIT Maintenance Heavy Duty Adjustable Workstands

ONETWOFIT Maintenance Heavy Duty Adjustable Workstands

The bicycle repair rack is an idea for a home or repair shop to fix mountain and road bikes. They offer a 3 years warranty on bicycle racks. If you have a question about their product, please contact them. The steel frame has a textured powder coat finish for long lasting strength. Home bike repair stand can hold up to 66 lbs. The bicycle stands are more stable because of the triangle base. Extra protection for the floor is provided by non-slip rubber feet. A fully-adjustable cradle allows your bike to hold in any position. The U-shaped gear teeth are scratch-proof and hold tubes between 1 and 2 inches. The bike maintenance stand has a quick lock set to adjust the height. Don't worry about your waist hurting due to crouching down. The work bike stand is foldable and easy to store. The portable bike holder can be put in the boot of your car or in a corner. Tools container is used to hold small parts in order to prevent them from losing. You should keep the tool shelf upright.

Brand: Onetwofit

👤The mount for the tray is missing. The tray cannot be mounted on the stand. I did email, but no reply.

👤My rover weighs 80# with all my add ons. The stand will hold the weight. If you remove a wheel, be careful. It folds up very small when not needed, and can be used to modify individual bikes. I like it.

👤The stand was great for the price. Had to reinforce the collar. It held up a 45lb bike.

👤I can say that it struggles to hold 42 lbs after a month and a half of use, even though it says it will hold 60 lbs. There is a It's not a bad item, but it doesn't match up with the specifications.

👤For a bike or frame. The frame is large and will strain it.

👤I was really impressed with how sturdy it is. Two thumbs up for the price.

👤The pros are 1. Well built and very sturdy. It is easy to setup and fold 3. My sanity was saved by repairing the bike. I saved my wallet from being easy to do repairs at home. It's easier to fold with out 2 and it comes with a "tool tray". Does take more room in the garage, but it is worth it. This repair stand is a very good build, and I have seen many "tripod" build qualities as a photographer. I don't have a fancy light bike, but I do have a heavy old school one that this stand easily handled. I wish I bought a bike stand a decade ago. Who knew this was important for people that own more than 2 bikes? I put my kids bike on this thing to make sure it works. The price of the bike stand is very competitive and I can't see what else I would need from a stand. "It works."

👤The bike stand is well priced for what you get, so you can spend more money and get a better stand. It's fairly well designed and builds up quickly, allowing for you to hold the bike at a good range of heights. It's stable while holding the bike, too, and has a solid triangular design that prevents easy tipping. It's not like you can't knock it over if you want to. The parts tray is difficult to get on and off, and the legs are blocked from folding up for storage, making it a bad design. The parts tray didn't fit in with the original design. I will probably not use the parts tray in the future since it's hard to put on and take off and it prevents folding up the stand afterwards. It's a useful stand for bike repair, and seems fairly priced.

2. Bicycle Mechanic Maintenance Aluminum Adjustable

Bicycle Mechanic Maintenance Aluminum Adjustable

The wall has a mount on it. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. If you have any questions about the installation, seek professional help. It's possible to hold your bike in a stable position with a lever and adjust the height to make sure your waist is comfortable. The intensity of aluminum alloy tested can afford a max load of 60 pounds. Tools with MAGNET. The big tray has a place for different tools and is more space efficient. There is a front wheel. No knives. The package includes a tighten rod that won't let the front wheel turn when you're working. Sturdy triangle base with rubber feet will hold bikes steady and won't scratch the floor.

Brand: Cxwxc

👤Great stand! Light weight, holds my 55lb eMTB and seems stable. It folds up like a camera tripod for storage, and is easy to use. Very happy.

👤The bike stand is a great product and a good value. The assembly instructions are confusing, but they went together well. I contacted the seller and they fixed the issue. I recommend this bike stand.

👤This stand is built for money. The stand is great and the reviews seemed positive. There is a Brad posted a review about sawing a bolt. The seller told you that it was two pieces. All you had to do was remove one of the sides. It's not hard to notice.

👤Excellent stand. It took less than 5 minutes to setup the bike. There is a The stand is very sturdy. The materials seem to have been put together. Time will tell if this stand holds up. Very happy with purchase so far!

👤I opened the box to find another one. I found another box when I opened it. I got to the stand after opening the box. These days, packaging like this says a lot about a company. I haven't even touched the stand yet, but I'm already impressed. What a stand it is! My photos don't do it justice, it's a master piece of aluminum and high strength plastics. You would be foolish to buy any other stand. It is peace... I'm leaving. February 2020 is an update. There is a This stand is ugly. There is a I am still assembling the tricycle and it has been holding it for a week. I can flip it without removing the bike. Good stuff.

👤I bought this to fix the bicycle my son received for Christmas. It was in need of a derailed adjustment and had wobbly wheels. There is a I was surprised by the quality of the stand and the instructions. I have a lot of mechanical experience and it's easy to assemble. It can be sturdy or wobbly, but it needs to be checked by the assembler. I had to tighten several bolts. There is a The knuckle where the bolts were bent was easy to fix using a Cresent wrench. This seems to be a problem between the packaging and the delivery schedule. I highly recommend this to anyone with good mechanical skills. If you balance the bike, or find the center of gravity, it's sturdy. Your bike is going to fall if you don't. I recommend this to people with a practical skill set that is worth a dollar. They could charge more. If you don't have practical skills, I suggest using the park bike rack or Park Tools. Thank you to the manufacturer for making this. Instructions for assembly and use should be written in a concise and clear way. You can post them on the internet.

👤When you bought the bike of your dreams, you spent the next 2 weeks dealing with remorse, and finally got to the point of I Love This Thing. The bike stand is very similar to that feeling. I spent a lot of time researching and searching for a cheaper dumpo and found one that was 100 percent better. The home mechanic needs a good stand. It takes common sense to operate, but it might not be the best option for those who can't change a light bulb.

3. CXWXC Bicycle Repair Height Adjustable

CXWXC Bicycle Repair Height Adjustable

You can install on the wall. The repair rack needs to be on a stable wall. Unless there is a wood stud behind the wall, don't mount the hanger on the dry wall. It's possible to hold your bike in a stable position with a lever and adjust the height to make sure your waist is comfortable. The intensity of aluminum alloy tested can afford a max load of 60 pounds. There is a front wheel. No knives. The package includes a tighten rod that won't let the front wheel turn when you're working. The complete bike tool kit. The CYCLISTS 23 piece bike tool kit contains everything you need to keep your bike in top shape. Bicycle repair tool kit. Chain rivet extractor, chain ring nut wrench, Crank puller, Freewheel turner&lock ring wrench, Bottom brachet wrench, 15mm pedal wrench, 2-in-1 master link chain pliers, Tire lever, Flat/phillip screwdriver, Flathead screwdriver, Hex

Brand: Cxwxc

4. Feedback Sports Elite Repair Stand

Feedback Sports Elite Repair Stand

Perfect positioning is ensured by the use of Teardrop-shaped tubing. There is a bike repair stand at home and on the road. A portable stand with a quick release head and rubber jaws can hold up to 2.6" tubing. Stable on almost any surface and can support bikes up to 85 lbs. Work height can be adjusted from 42" to 71"

Brand: Feedback Sports

👤Not great out of the box. The delivery would not work out. The red button was loose and the mechanism did not engage. Everything is ok after taking the piece apart and reassembling it. Something must have banged on the shipment. I wanted to post this review as soon as possible because I couldn't find any online photos of the internals. The internals are well made. Most people buying this stand will probably take it apart and put it together. I put the flat-curved metal piece underneath the threaded rod for better motion. Bike work will be done soon. After a few months, I will try to update this review.

👤This was purchased over a park tool. I wanted the small footprint when not in use. I can't say that it doesn't hold my bike steady. It holds the bike steady. It took some time to feel that the arm was going to do the job correctly. I have used this for over a month and have done a few jobs on my bikes. The piece of equipment is great. The rachet with the spinning handle is easy to use with one hand, and it's also good for holding your bike with the other. I got the bike up and did work on it the first time. I had to change the arm's position to stop it sagging. The fix was more operator error than the stand was bad. Even though the arm is seated and positioned, there is a small amount of sag. My bike should be able to handle this, but it looks like it might be. It looks great and is stable. It is easy to open and close. If you had to, you could do it with one hand. The stand is lightweight and can be taken with us on trips. I will get something to carry the bag with me when we go on road trips since it was ridiculously overpriced. I collapse down the arm and the top half and then fold in the legs. This allows it to stand on its own and not have to stand on the floor. There is a That might be the best feature.

👤This is my first repair stand and it is a sweet item. I've only begun repairing my bike. I can't speak with a comparison of repair stands. This is ready to be used right out of the box. The materials used are top grade and the components work together. I directed my questions to the manufacturer of the repair stand. They reached out to me in a timely manner. They are passionate about their products and that is what came across in the email exchanges. Thank you!

5. West Biking Bike Repair Stand

West Biking Bike Repair Stand

The floor-standing bike repair station is made of aluminum alloy to ensure its overall strength. The folding length is 85 cm and the weight is 3.6 kilograms. It's convenient to put it at home. The height of the repair bike stand can be adjusted from 85 cm to 150 cm. The maximum load is 85bls. You can easily access the bike at any angle without moving your feet with the easy rotation of the spin clip. The mechanic stand has a 90 degree fold-out knob that can be folded down to fit into your car or used for storage. The collapsible workstand delivers on every count. The park tool bike repair stand adopts the most stable tripod frame structure to ensure that the bicycle will not roll over under any circumstances, and can provide the balance you expect when using the bicycle maintenance stand. There is a limit-be fore order. The repair stand has a maximum holding capacity of 85 lbs. If you are working on heavier bikes such as mountain bike, commuter bike, fat bike, or e-bike. You have to double check to make sure your bike is in good shape. This portable bicycle stand is a reliable work stand for both traveling to events as well as performing home repairs. It folds into the supplied storage bag when not in use. The West Biking bike repair stand is reliable. Feel free to contact them if you have any questions. All issues will be solved in 24 hours.

Brand: West Biking

👤There are two ways to use the bike stand. See the photos. The mounting arm is supposed to be in line with the tighten knob on the stand to make sure it works. Do not try to use the arm at the right angle. I did it the wrong way and the arm couldn't support the weight of my bike. You will get the most support when the arm is in line with the large knob, because the arm can move in almost any position you want. The stand easily handled the weight of the bike when I rearranged the arm in line with the knob. The bike stand was able to support the weight of the bike. The tripod design has good stability and the bike never felt tippy. I used a bungee cord to hold the handle bar in place.

👤I chose this item because of the manufacturer's weight eating. I started buying and selling bikes that need work and I work on everything from heavy to light road bikes. The stand held the tire bike in the picture well. It does the job well and is solid. The arm is made of aluminum. The internal locking teeth seem to work well, I have not had any issues with it slipping on me. The plastic is heavy duty. The 3 legs don't seem to be long enough to keep it from wobbling when adjusting gears, but that's ok because you don't have to crank the pedal that hard to do so. If you pedal too hard, it can spin around. There is a When I looked at this item, I knew it would have an issue. The hand screw is wheel type. If you hold a heavy bike you have to be able to hold it with one arm for 10 minutes while you tighten it. If you have a fat bike, it can become a problem if you work on road bikes or light mountain bikes. There is a I am very satisfied. I am getting my money's worth at the price I paid for this heavy duty item. Unlike other stands at this price point, I don't think this will have any broken or malfunctioning parts. I would recommend this stand to anyone who is on a budget, anyone working on heavy bicycles, or anyone who is looking to add a second stand to their workspace but doesn't want to spend a ton of money for a quality stand.

6. CyclingDeal Full Aluminum Repair Stand

CyclingDeal Full Aluminum Repair Stand

There is a 90-day money-back policy for the convenience and warranty service. CYCLESPEED Bike Stand is a stable way to hold nearly any bicycle for adjustments, cleaning, and repair. The CYCLESPEED bike repair stand is a great upgrade for your shop. The after-sale service at their bike repair stand is reliable. Feel free to contact them if you have any questions. The bike has a limited weight. It is able to hold max because of the strong alloy design. The bike's weight is at any angle. You can't deny that it can grab a large mountain bike firmly. The adjusted head allows you to adjust the bike to the perfect position and has plenty of room for fixing pedals. The premium aluminum body is ultra-stable. Quality will never be sacrificed for portability with the CyclingDeal full aluminum alloy workstand. It's foldable and stable. It is portable and foldable. It's easy to find a spot to store when not in use because the folded length only takes 90 cm. The triangular structure design will give you a super stable workflow. Enjoy the bike maintenance experience. ORDER NOW! It's free! They can provide a 2 years warranty because they're so confident in the product quality. It was made in Taiwan.

Brand: Cyclingdeal

👤The product exceeded my expectations. It is easy to collapse and move around. It would be nice if it came with a bag, but that's okay. There was no instruction manual for me. I don't really need the tray, so I just use it as a key holder on a table near our front door, even though I wasn't sure how to attach it. I've used it to wash bikes. I use the roof rack to take off the front wheels before putting bikes on the car. I bring it with me in the car. I can't imagine how the more expensive blue product could be any better than this one.

👤I was very worried when the box arrived, it was plain thin cardboard with only some Chinese writing on it. I don't think you can beat this stand for the money after getting it assembled and putting it to use. It is light and easy to use, thanks to its quick locking levers, and it is sturdy. It has a metal work tray. My bike has no problem holding it up. 5 stars for quality and price.

👤I bought 2 of them. If you are trying to work on a bike, this isn't the stand you want. It will tip over and I have arranged every position possible.

👤The best stand for money. This one is all metal, except for a small collar that is plastic. It has full suspension and no issue. Also has a road bike.

👤I've only used it once and there are no complaints. I put the cross piece in the box and it was ready to go. I locked my mountain bike into a position and hung it on it. I adjusted the bike's brakes. The stand held the bike firmly and I was never worried that it would fall over.

👤This thing holds my mountain bike perfectly. It is pretty small and sturdy. I am very happy with this purchase. It is not too heavy. It works great for bike maintenance. The tray is very convenient. Anyone looking for a stand that won't break the bank should get this.

👤I think I made the right choice when I searched and reviewed a lot of bike stands. There is a It's sturdy, easy to fold and all the clamps are strong.

👤The stand is easy to use. My son races mountain bikers. We picked this one up for him because he needed a stand for a while. The price was good and it is a bit nicer than other options we looked at. I was very pleased with the purchase.

7. Feedback Sports Sprint Work Stand

Feedback Sports Sprint Work Stand

You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan. The most rigid bike-stand connection is created by fork or rear dropout mounts. You can get quick and easy access to any part of your frame on the rotating platform. Adaptable to frame standards. The structural integrity of your frame can be protected with precision mounts. The frame and fork are included. 15x 100mm / 120mm (boost front) is the Thru Axle. Anodized T6 aluminum is incredibly durable. The rubber-coated end caps and stiff tripod base make the work stand stable even on the odd surface.

Brand: Feedback Sports

👤I like this stand. The background of the story. The PCS-9 was a clamp style stand. It was a brick house, solid and heavy, but never seemed tall enough because of how the bike hung on it and it didn't fold down for storage. I like the construction of the FEEDBACK SPORTS SPRINT WORK STAND. If something on it wears out, you can replace it. It can be used with quick release and thru axles. The front and rear mounts can be adjusted for different bikes. You can work on the stand. There is a Storage was a big thing for me. I have a PCS-9 that folds down to less than 3 feet long and about 10 in wide, which is why it sat in the corner of a room. I don't like the idea of having to buy it extra, because it doesn't come with a storage bag. You can get one for under $35. You would think that the stand would be included or at least have the option to buy both at the same time. If you plan on folding it down, I recommend you get the bag, which has a storage pocket for the quick release skewer and thru axle adapters. There is a note on the bag. It's worth $35. There is a This is just nit picking, but this thing is shiny and blinged out. This stand is being used for cleaning and maintenance so I'm not a fan of that. It's like painting an off road vehicle candy apple red and expecting it to stay in pristine condition. I wonder how this shiny red finish will hold up. This is more of a matter of taste for me. Conclusions: It's a great stand, right? It's pretty close. Is it overpriced? Park Tool sells a similar stand for $340, so I wouldn't say no. I don't think any of them are enough to justify the extra cost. The feedback sports sprint work stand is a solid and compact stand that is very functional and may be the last stand you ever have to buy. Don't think and just buy the thing!

👤My fiancée's cyclecross bicycle with quick releases and my road bike with through-axles are both serviced by this stand. To use this bicycle with 12mm through-axles, you need to buy a 12mm adapter. The 15mm supplied part will scratch if there is not enough play in the axle. You have to remove the silver receiver bit to swap between the two. There is a The easiest way to mount a bicycle on a stand is to remove the front wheels from the fork, lift up the rest of the bicycle, and then either attach the dropouts to the QR or threading the thru-axle. I think the Park Tool PRS-22.2 has a better mount. It looks like the sprint stand has nicer clamps, having watched the video on Youtube. With the Blue Team standing, you would have to faff a bit with the tension on the clamps, but with this, the tension doesn't need to be adjusted and it's just a matter of closing it all the way.

8. Park Tool Deluxe Mechanic Repair

Park Tool Deluxe Mechanic Repair

The PCS-4-2 uses a Micro-Adjust Clamp. The height of the Clamp can be adjusted up to 67” (170 cm). It takes from 55 to 72 seconds. The weight is 25 lbs.

Brand: Park Tool

👤I knew I needed a top quality bike stand as I just purchased a 60 lbs Ebike. I wanted to know if anyone knew which bike stand would hold up in a challenging job. They recommended this model to me. I know why. The stand is well designed and the components are top quality. The stand is attractive because of the powder coated finish. The assembly is easy to follow. There were a couple of 7/16" wrenches, an Allen wrench, and a box end wrench needed to put it together. There is a I put my Cannondale mountain bike on the stand by attaching it to the bar and then connected it to the seat post. Both bikes were handled with ease by the stand. It is very sturdy and stable. I was disappointed in my fellow reviewers for downgrading this stand. Did the paint have scratches? Really? The vendor should be blamed but one star for scratches. It's easy to get 5 stars and then some. It arrived in perfect condition, all the parts were carefully wrapped or boxed, and it was handsome and functions as designed. You get what you pay for. The stand is worth a lot. Highly recommended. There is a The only thing needed is a handlebar holder.

👤The last Park stand was purchased in the late 90s and I needed another bike repair stand. The ability to store it was easy because the leg stands were placed together. This stand was a huge improvement over the old one. I liked the way it was adjusted off the bat. You can securely hold the bike in place by rotating the handle to the tightness you want. The plastic covers on the end of the stand legs are a con. I had to wrap some electric tape around the leg and push one of the covers over it to make it less prone to fall off. It's not worth knocking a star off. I have no doubt that this stand will last as long as my previous one.

👤This stand is very strong and will last a long time. This stand is great for tall people. I'm 6,0 I can work on my bike from the stand.

👤If you want a bike repair stand that will hold a heavy bike with out falling on the floor and damaging it, this is the one to get. I highly recommend it, it is built like a tank. The stand is heavy and hard to store. This stand holds my bike.

9. Bikehand Mechanic Bicycle Repair Workstand

Bikehand Mechanic Bicycle Repair Workstand

It is folded down to 45" x 14" (1140mm x 350mm). Light, strong and portable. The repair stand is made of aluminum and plastic. It is light and compact when folded. It is convenient, durable and well-designed. HEIGHT ADJUSTED: Quick Release is adjusted from 1m to 1.5m or 39"-59" fully extended. The tilt, height, and angle all have strong skewers. It's helpful when you want to get the bike in the best position. The head isROTATED: it is smart and rotates at a rate of 350 degrees. The teeth are heavy and well made. It could hold a lot. At any angle, 25 or 55 lbs bike. The tool plate is foldable. Attach or remove the tool plate by hand, and it will be easy to set up and store. It isdurable: The bike workstand was released to the market for a long time. One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack.

Brand: Bike Hand

👤The bike stand is cheap. It's a simple but proven design that has been copied and slightly modified from other stands. The fact that it had 3 tripod legs with disc feet was something that attracted me to this particular stand. I don't trust the V-shaped legs as much as a tripod when it comes to stability. If the mass center is in the middle, the load is spread out evenly all around. The bike mass is off the center, but the stability is there. That point is not reached when rocking the bike. There is a I had a problem with the position of the bike stand's clamp, which is positioned right in line with one of the legs. You have to work on the bike to be aware of the leg underneath. I wanted to see if I could change the position of the clamp in the center of 2 legs, even though it was intended for max stability. It worked, but at the cost of some stability. Still not enough to tip the stand. I can always go back to the old position, but I will have to decide which one I prefer over time. There is a The other thing I like about this stand is that it is easy to setup and folds up afterwards. There is a small footprint for storage for a stand that takes up a lot of space. The all-aluminum and plastic construction makes this stand light and it doesn't feel cheap.

👤I narrowed it down to the bikehand tripod repair work stand or feedback sports. The cost of bikehand, the review from outdoor gear labs which I trust, and the fact that my usage is once a month convinced me to go with the above. The construction is solid and will last years, it's not cheap. I am sure you will not be disappointed.

👤I like this stand because it folds and unfolds easily and it has good stability if you don't set the bike too high. I like the stand mounted tool tray. I've had stability issues with 2 legged stands in the past and this stand is $50 less than the Park stand. The Park stands are made of steel, but washing your bike on an aluminum stand poses no problems. There is a The gripping head works well, it's a little tricky to change the head's position, but it locks the bike frame, especially an oval frame like the one I have on my legacy Gary Fisher road bike. I've used stationary repair stands, wall mounted stands, and 2 legged stands to fix my bikes. I don't have the room for a wall or a permanent floor mount stand, so this 3 legged stand is perfect for me. There is a If I need to set the bike up high for work on a bottom bracket, I'll wedge the back leg under one of my tool boxes for extra stability. There is a The stand was a pleasant surprise and my only major con was the stability issue with a high mounted bike. I wish the main stand pole would change so I could set the 3rd leg behind the bike to improve balance. This unit is easy to use and folds down quickly. The magnetic tool tray is a bonus. Hope that helps!

10. WOOPY Goliath Adjustable Portable Maintenance

WOOPY Goliath Adjustable Portable Maintenance

ANTI-SCRATCH : The rubber on the hooks on the bike frame is soft to prevent it from being scratched or slipped. QUALITY MATERIALS Professional quality, weather and water resistance. The bike stand is made of high quality iron and plastic. The frame and base are sturdy and easy to repair. The workshop bike stand is very good. The patent is for a height and width adjustment body. The bike can be fixed stably. The telescopic bar makes the mounting brackets height adjusted so that your back won't suffer during repairs or cleaning. The rubber is strong and won't hurt your bike. RESISTANT: The aluminum alloy body is portable and easy to store. It can support a maximum of 132 lbs bicycle. The most sturdy bike workshop accessory. It's an ideal accessory for road and mtb. It is easy to install. The bike rack is easy to install and comes with instructions. It can be placed on the ground or left immobile for easy moving. One of the best things to do with a bike is to repair it. For The range of the telescopic mount is from 70 cm to 150 cm. Frame tubes with a diameter of 40 to 75mm are suitable for the accessory. Useful for both bikes.

Brand: Woopy

👤I permite colocar la bicicleta de la forma correcta para realizar el mantenimiento semanal. I permite sujetar la ebike, pero se mueve. Vale lo, se paga.

👤No le doy 5 estrellas porque algunas soldaduras are realizar. Ahora, lo dems lo encuentro perfecto. Mi e bike imagen de robustez.

👤Muy estable. The e-VTT is 25 kilo. Es caro para toda. La vida.

👤The Fixieren des Fahrrades is defekt. Bitte um Austausch.

11. Unisky Mechanics Workstand Adjustable Maintenance

Unisky Mechanics Workstand Adjustable Maintenance

Work height can be adjusted from 42" to 71" HEIGHT ADJUSTABLE: The height of the stand can be adjusted to meet your needs. You only need to bend over when it's necessary because of this bike repair workstations. The quick-release clamp rotates in a way that will not damage the bike's finish. The front wheel is supported by a rod with a handlebar. When repairing, both facilitate your work. There is a tool plate with MAGNET. The bike repair rack has a magnetic tool tray. The tool tray is a good place to put all the tools you need. The different partition of different sizes can be used to keep tools organized. It is possible to fold it up. The legs and tubes are easy to fold. You can put the bike repair stand in your car for a race or in a corner of the house for space-saving reasons. It's convenient to assemble and set it up when you need it. Strong anddurable: The bike maintenance rack is made of heavy duty construction and supports bikes up to 66lb. You can use the premium steel tube for a long time. It's not suitable for electric bike.

Brand: Unisky

👤I'm surprised by the quality of this thing. I've been a bike tech for 16 years and I've been putting off buying a cheap homeowner stand because they all suck compared to a pro stand. This does not compare to a Park 2. It's pretty okay compared to the PCS 10. This thing is perfect for a basic bike build, and I wouldn't beat it. I would recommend this stand to someone who doesn't have one.

👤A good value for money. I received this today and have had all three of my family's bikes checked out. It holds the bikes well. It is not a commercial product, but it does not have a price tag. I only removed the bikes for work once. I didn't think it was worth that much on the stand. The bikes were braced on the floor. The stand was just fine. I hope it holds up and doesn't fall apart. One of the bikes had no issues.

👤I have been biking for at least 40 years. The last 25-30 are bike maintenance periods. I've had bike repair stands. I left the repair stand. The base was made of aluminum and the head was plastic. I didn't like it because I wanted a bike shop style clamp. This has it. There is a big plastic head. I got it. The base is almost the same as the Spin Doctor. I didn't like it and didn't trust it. It was difficult to remember which way the lock mechanism for the head to rotate went, and sometimes I found it not locking properly. The teeth were separated under the load. If you needed to level the bike out for chain cleaning or some other repair, it really put a lot of Torque on the head and the rivets holding the head from rotating didn't look strong. If it's a light road bike, go for it, if you have an e bike, I wouldn't trust this rig. I sold this thing after a week of use. I have a park tool. Some of the park tool's stuff is overpriced, but their repair stands and truing stands are worth the extra expense.

👤The stand is good for lightweight bikes. I have a frame that is lighter than most frames that maxes out the capacity. If you are not dumb, the stand is solid and sturdy because it has two legs and if you put weight out of the center of the legs, it will fall. The bicycle is held by a piece of furniture. It doesn't fit over a wide frame and it doesn't hold weight by allowing what it's grip to slip in between the rubber plastic grips. Unless you go into the $200+ range stands, you won't find better. I wouldn't buy a stand under $200 on Amazon for a heavy person.


What is the best product for bicycle repair stand clamp?

Bicycle repair stand clamp products from Onetwofit. In this article about bicycle repair stand clamp you can see why people choose the product. Cxwxc and Cxwxc are also good brands to look for when you are finding bicycle repair stand clamp.

What are the best brands for bicycle repair stand clamp?

Onetwofit, Cxwxc and Cxwxc are some of the best brands that chosen by people for bicycle repair stand clamp. Find the detail in this article. Feedback Sports, West Biking and Cyclingdeal are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to