The handlebar has a diameter of 25.4mm.
👤My neck and back hurt when I rode my mountain bike, this gave me a 4 inch lift on my handlebars, so now I can ride without neck and back pain, I love the product so much that I have my husband put it on his bike, what a difference it makes.
👤It worked out great. I went to the top.
It was made from light, stiff, and durable 3D-forged alloy. Standard for 1 fork is 28.6mm. The bar bore is either 31.8mm or 25.4mm in diameter. The angle is adjusted upward to raise the handlebar position. You should ride comfort, steering control and bend less. Lower the handlebars, reduce wind resistance, ride faster. It's for road bike, mountain bike, and other bike.
👤It worked out as expected. I used it to try out different geometries.
👤The ability to have any angle or position for your bars is priceless and saves a lot of time.
👤The head is shorter than the one I replaced so I had to grind the stem to get it to work again. The stem is nice.
👤I wish it would adjust to 90 degrees. The angle you see in the picture is not much different than the one you see in the movie.
👤No issues after 6 mos., it seems very sturdy and durable. Of use.
👤I wish I had these a long time ago. You can adjust to your flexibility.
👤Excellent idea. It's great. Thanks.
👤This is what you need if you are leaning too far on your bike. The stem and grips helped to improve comfort. The value is easy to install.
👤I appreciated the detailed dimensions in the posting.
👤It fit my bike perfectly. The standard post has a handlebar. Lifted the whole unit up 2 inches and made it much more comfortable for me. Fast shipping and a good product. Good job.
👤Product arrived on time and appears to be good.
👤It looks like it is well made and sturdy. I had to send it back because it wouldn't fit my GT Aggressor.
It's for road bike, mountain bike, and other bike. The material is aluminum alloy. The handlebar is 25.4mm in diameter. The fork tube has a diameter of 22.2mm. The stem length is 40mm or 80mm. There are millimetres. The stem rise angle is 30.
👤The bike I bought was too large for me. The handlebars were brought down to get the right fit. If you want to mount the handlebars, you will have to remove the levers on the other side. It was very easy to install.
👤It's easy to install. When the stem is raised to about a half inch lower than the max, there is no flex. The upper position. There was no side slip. Our new Schwinn trike is perfect. There is a Ps. I have been working on bikes for 50 years. I usually don't like these kind of stems because of the flex, but the price on this one is right and the bike fit is perfect. Great deal.
👤I had to raise my handlebars to take some of the stress off my shoulders. The bike stem worked well. It was easy to install, and seems like it was good quality.
👤The stems put you on the bike so you can enjoy your ride without neck and back problems. It makes your ride more efficient.
👤The stem was too small for me. The finish and design are very nice.
👤The stem's wedge wouldn't grip the inner steerer tube, which allowed the handlebars and front tire to be moved in opposite directions, so I wouldn't give it a 4 star rating. The old wedge worked after I replaced it with a new one. The rest of the stem was advertised and works.
👤My kid's bike has more life because the handlebars can now be raised, so it will fit him for a few years.
👤It isn't a nitto. It is also not $70. It does its job perfectly and doesn't look bad.
👤I bought this because I wanted to get more height in my handlebars and move it closer to the seat. I question the quality. I think I might have gotten a returned item as the finish had some scratches near the mount, but it's not important for me as my bike is vintage and scratched. The plastic cap does not fit, I had to use the one that came with the bike, the shaft wedge function is questionable, and the handlebars came off center while riding on bumpy ground. I may have to use the stock stem's wedge to get around it. I found that the Torque on the handlebars needs to be tighter than I thought it was, and I am afraid that it might break, so I needquing specs to help. If it breaks, I will tighten it and ask for a return. For the price, and re-using of existing parts, it is okay.
Handling more flexible, light weight is easier to do. 1. The maximum height extension is 180mm. There are 6 gaskets, 2 x 20mm, 3 x 10mm, and 1 x 5mm. You can adjust the gasket to fit your height. 2. Simply connect the original front fork stem to the new one. 3. The forged aluminum material has a polished anodized finish. 4. It is suitable for most bike with threadless headset. 5. Handling more flexible, light weight is easier to do.
👤The spouse and I took the bikes out today. It was noticeable that there was no wrist, hand, shoulder, or back pain after about 14-16 miles. I might even buy a stem that can be adjusted to fit my body, and maybe even buy upright grips, since I am going to try some more rides. The benefits are well worth the minimal cost of experimentation. Do you want to come back from a long ride achy or do you prefer to spend money and make your ride comfortable? There is a The product arrived in two days. I had looked for videos on the internet before the event. Installation was not good. It took about 10 minutes. I bought two of these for my spouse and myself because I had just bought two e bikes for them. The handle bars on the bikes were too low and caused us both to lean too far forward which resulted in wrist, hand, shoulder and back pain. The ride is much more comfortable now that I raised the bars up. If you have a mountain bike, you might want to consider one of these.
👤This is what I needed to stop my hands from feeling numb. It wasn't too long for me. The handlebars were the same height as my seat when I adjusted the pedals, but I'm 6'2” and on a large frame fat-bike. The poor geometry was fixed by this. There is a It's very sturdy with no creaking. I weigh over 300 lbs. It holds up well with me. I'm very happy with it.
👤This product does what I need it to. I can ride without hunching over. There is a There is one thing to note. The front brake line has a limited amount of slack, so it is a good idea to buy a much longer brake line or cable. The item allows for a big change to the handlebars.
👤Awesome. It doesn't raise the handlebars to the max. The total length of this product is that. It doesn't take into account that you have to use about 50mm or 2 to bolt it on. It's about 130mm or 5. It's still great. If you need more, put some above. It would stick up 130mm. I think you could remove the top spacers and cut the bolt if that bothered you.
👤I am happy that it raised my handlebars. I needed extra ones, so I had the previous one. It was fine. I didn't try to tighten it. It comes with a spider, a spider web, pumpkin, and a white cloud, but the rest didn't make sense to me. Someone in the comments or question area noted the same thing and wanted to remove the decals. I used cotton pads to apply finger nail polish. I removed the top layer, but you can still see the white over the black ground. I am going to use a tooth brush and fingernail polish this week. I think I can get it all off. I am happy with my purchase. I bought another extender a month earlier, which was about 2.75 inches shorter than this one, and it was good. When I bought this one, I had to replace all my cables because my old ones became too short, and I couldn't get my brake and shift levers back onto my handlebars. I bought Jagwire cables that are longer. I had to buy new housing and cable for both the brakes and shift, and each cost me about $30 or $35. I watched a video on how to adjust a front and rear derailleur. I would recommend buying the orange Klunker Commuter Urban Bicycle Handlebar and the Champ Oversized Comfort Bike Seat. I can ride a 25 mile ride now that I can sit up straight.
The handlebar has a diameter of 25.4mm. COMPATIBILITY: Only the 1-1/8" / 28.6mm THREADED fork steerer can be compatible with this stem. Make sure to double check the fork size and type. It'sATURE: Simply press and open the safety button, then pivot the stem to any angle between 0 and 80 degree to adjust the height and reach of your handlebars. Serrated and precisely made handlebars for more powerful clamping. It's difficult to find a stem that fits a 1-1/8" threaded fork nowadays, and this specific stem will do the job. The material is made from one-piece forged alloy. It is easy to wipe off and clean with matt black finishing. There are some things that areSPECS. The stem length is 120mm. The handlebar's size is 31.8mm. The angle is 0o to 80o. The height is 180mm. The insert is 65mm. The weight is 606g. The material is forged alloy. You can order now and pay free. They can provide a 2 year warranty on their product. It was made in Taiwan.
👤There is a hole in the rotating hub that needs to be bored in order to pass an Allen key down and access the long bolt that tightens the stem. The hole in the stem was too small. I couldn't use the key wrench to tighten the stem. The hole I drilled out was an unnecessary modification.
👤The handlebars are great, but it took me a while to figure out the basic workings of the unit. It will be amazing when I dial it in. Does anyone know how to put the handlebars on? Is it better to tighten them down once everything else is shut down?
The stem is black and has a rating of 0-60 degrees. For 1-inch fork steerers, the shaft diameter is 22.2mm. 180mm quill shaft. The handlebars have a diameter of 25.4mm.
👤I like this stem. I was looking for a way to convert to a more upright riding position and this is what I found. Let me clear up the confusion about the dimensions. The stem is 1 inch in diameter or 25.4mm. The pivot point is described by the length of the part that has the handle bar. The 60 degrees they refer to is 1/3rds of the distance from the lower portion to the upper portion, which is not doable. The thickest point of the handlebar is measured in the middle. You can choose between the 90mm portion or the 110mm portion. I chose the 90mm one because it's maximum 60 degree extension would not allow it to be as far forward as the longer one. It looks professional, unlike the original which had welds. See photos of the setting.
👤The low profile of the handlebars gave me lower back pain when cruising, even though I loved my bike with dropbars. So... I might be the first ever cruise racer. When I want to dig in, I can grab the lower part of the bar and kick it. Exactly what I needed. I recommend this stem for anyone who needs to adjust the bar's height.
👤I picked up a free Trek 700 in 1997 or 1998. The steering was not high enough for my liking and I found a stem that fit like a glove. If you're worried about it being too high, just get this one and lower it if you need to, and adjust the handle bars closer to you. You have a lot of adjusting to do. If I wanted, I could go higher, but I would need longer cables. I like it a lot. There is a The only negative is that you can't check the tightness of the main bolt once the stem is up. I don't think it's a big deal. I check all this stuff once or twice a year so it will be a little more work, but it's fine. I'm not sure if you can loosen the horizontal bolt, it's just a black cap. It feels like metal, not sure if it comes off. I will have to look into it more. There is a If you press hard from one side to the other, it seems to have a little wobble. This is fine for most bikes. I like a tight handlebar. The horizontal pivot area is just a large pin. It seems strong.
👤Most bikes in big box stores are of an old design styled for road racing or BMX racing. Unless you go to an old style single speed or three speed, there wasn't much alternative. I'm starting to wonder how I could raise my handlebars and move them back to improve my posture and take the weight off my hands. This is very sturdy and I was able to take the other one out. The top knuckle is adjusted.
👤I bought this stem to solve a problem. The stem on the bike was labeled "Ride Right Comfort System." The tilt angle is held in place by an internal plastic/rubber bushing. This might have been a shock absorbing system for the handlebar, but after many years, the bushing dries out and the handlebar falls forward easily if given pressure. Replacing the stem is the only solution since parts are no longer available. The position of the handlebars was the same, even though this Sunlite stem looked a bit longer. It is a "pop top" so that you don't have to remove a grip, shifter and brake lever in order to install it. The old stem did not have this feature, so I used a Dremel with a cutoff wheel to cut through the mount on the old stem, then popped it off. This is the best way to get one of the tight rubber grips off of the handlebars. The handlebar stays in place when mounted and tightened up.
It's suitable for most bike with threadless headset. SPECIFICATIONS: The maximum height extension is 115mm ( 4.5 inch). It is easy to connect the original bicycle fork stem. The material is forged by aluminum. The lightest weight is 157g(0.346 lbs).
👤This extension is great. Sturdy, light, looks good, and gives the best hight found. My wife cannot ride a road bike because she has a bad neck and is made for a hunched position. I was thinking about a number of ways to make her more upright when riding, but I found the perfect solution which required the least modification or cost using the same rigging and handlebars. The break cables on the Specialized E5 road sport bike are so tailored to have no slack through the frame guides that they are pulled pretty tight. The extension does what it is intended for and looks great doing it. Would recommend for anyone who wants to ride more upright.
👤I like not having to bend over on my bike as much since I am not using this to race and more comfortable sitting up. I still lean forward even with the maximum extension, so it's not like riding a typical commuter in Europe. The steering tube has an angle to it which brings the handlebars back a bit. It was very easy to install. The cap on top of the bars is held in with a longer bolt and does not require much tightening. I knew the brake cables would be too short so I ordered a kit. The shift cables on my bike are barely long enough to hold the cables in one direction, but they strain during a sharp turn, not one you would make riding, but turning the handlebars full stop will bind the cables in one direction. This was definitely needed and I would like a longer extension.
👤My neck and shoulder pain are over. My ride is more comfortable now that I sit upright on my bike. I was not able to use the full length because my cables didn't reach it. It's close. The installation took less than 10 minutes.
👤The height difference can be seen. I turned my handlebars around because I have shorter arms. The extension worked well. I sit on the mountain bike. I feel good on my back. It's easy to install. I think buying is a good idea.
👤I have installed a lot of stems. There are a lot of risers. This thing is much bigger than you think. I know we don't use metric but I would like to know what 210mm is. It was loose when I got it mounted. I took it to my local shop and the guys tried it too. They recommended against my install because of its play. Look elsewhere.
There are 4 sizes of bike handlebar spacers in this package. Each size provides a combination to adjust the height of the handlebars to fit your riding style. Bicycle headset spacers threadless are made of black anodized aluminum alloy material with smooth surface and exquisite workmanship, eco-friendly, sturdy and durable to use. Stem spacers road bike inner diameter is 28.6mm, 1-1/8" headset set, compatible with 28.6mm front stem fork of mountain bike, road bike etc. There is a feature. The aluminum headset spacer is more sturdy and resistant to damage than carbon fiber headset spacers, and it's 888-282-0465. If you go for a heavy duty off road ride, you should use aluminum spacers other than carbon, due to automatic cutting, smooth edge, and fit most of the road bicycles.
👤The stems on the two bikes I changed had 3 x 10mm spacers on them. I didn't know how I would position the spacers, and I didn't know the exact measurement of the bike's bar height. The kit was perfect. I used this product above the stem to place 20mm below and 7mm above. The other placee is 20mm + 4mm. These are an excellent value, and work exactly as I had homes. If I make changes again to this bike or others, I am set.
👤These work well, but they aren't as thick as the factory spacers on my or my son's bikes. It's a good value for the price and the selection of spacers. It's very easy to get the correct rise to allow for the 3mm gap between the steerer tube and the cap.
👤The image in the listing does not match what is in the description. There are three different types of spacers in the photo. The spacers they ship are 2, 3, and 10mm. When they arrive, you will be disappointed if you go off the photo.
👤The new handle bar was what I needed. I didn't think about needing spacers when I ordered the bike stem. I ordered this set and it arrived very quickly. It was nice to have different types of spacers.
👤These seem to work well and match the other ones on my Trek. I have had one of the spacers on my bike for a month and so far no issues. Will keep you updated if something changes.
👤The spacers were smooth with no burs and consistent sizes. There are 12 different sizes of the bag. You could buy a couple at the store. These are nice to have around.
👤There are 12 pieces for the price of 2. Good quality. I like aluminum more than carbon fiber. These mountain bikes will not fail because I can be hard on them. The handle bar height can be a problem if you don't have a good selection of sizes. For the next project, spare.
👤It worked out as planned. Good quality. There were no problems. Take accurate measurements.
👤This is a good set. The set has enough pieces to adjust more than one bike. They are lightweight and durable. The price was good and the shipping was fast, which was a plus.
👤Needed to install a new bike stem. There are lots of different sizes of Qurans.
👤There were different sizes of spacers. Excellent quality. They do what they're supposed to do. The product was good and the seller did a good job with it.
👤Good quality work.
The material is 6061 aluminum with a polished finish. The base diameter is 1 1/8” (28.6mm). The total length of the steerer tube is 150mm. The height of your handlebars should be raised. It is easy to convert a threaded quill setup to threadless. It's perfect for most bikes. The quill riser extender can be used on most bikes with a threadless steerer.
👤Needed to install a pro scooter stem on a 49cc scooter.
👤This is what you need to put a thread-less stem on a threaded fork. Plug and play works great.
👤The ottimo is called qualita'-prezzo. There is a Per modifica l'attacco manubrio per piantoni da 25,4mm.
👤Para poner una potencia, el manillar en uncuadro antiguo.va.
👤C'est facile monter.
👤Decid probar el extensor de vstago de manillar para bicicleta de montaa. Tenia para desmontar la horquilla, pero se pueda introducir el adaptador. No le hizo demasiada gracia. Quiz sea porque est enfocado. Ahora, lo bueno, ha sido para sutituir el manillar de una bicicleta. The original de la bicicleta istituir el vstago. Potencia y manillar, con los, ms a gusto. The tubo is 22.2mm in diameter. Con lo. The encaje is perfect. There is a En resumen, el vstago. No lo aconsejara, hay otros modelos that son ms sencillos de colocar. Vstago sustituto para modernizar una bicicleta ms antigua is una excelente opcin. La calidad del vstago es una. Mucho ms caras hay opciones. Tengo aprovechar las vacaciones para actualizar la bicicleta.
The stem riser is the best for most bicycles. A forged alloy alum construction. The angle can be from 0 Degree to 90 Degree. The bar is 22.2mm long. The handlebar has a diameter of 25.4mm.
👤It arrived quickly. It's easy to install. I can ride my bike in comfort now.
It's suitable for most road bike, mountain bike, track bike, BMX, etc. The stem is only suitable for 25.4mm handlebars. It is adjusted. The product equip with 5 gaskets can increase the height up to 100mm, it can adjust the gasket to fit your need freely, reducing the pressure of waist effectively. The bike handlebar riser is made of aluminum and has a polished finish. It's widely comparable. Don't worry about buying a bike accessory that isn't compatible with your bike. Their bike fork stem extension is suitable for most bikes. Easy installation. You can connect the original front fork stem extender. Light weight and flexibility make it easier to force when climbing. It is hard to loose the handlebar extender. Work on mountain bikes, road bikes, and BMX.
👤The handlebars of my bike were lower than my bike seat. If I rode the bike as a road bike, I would have hybrid tires for off-road biking. The Zukka extender was easy to install, using up all 5 included rings and the 3 that came with my bike. All fit perfectly. Make sure you use an Allen key to tighten things up. The perfect ride resulted in no back pain from straining my arms and upper body.
👤I can sit upright on my bike. Solid construction. The pinch bolts of the riser and stem need to be snug to be able to move. Align everything and hold while you tighten the top bolt to eliminate any play in the headset bearings. The inside of the riser has bottomed out on the top of the steering tube, so if you find it is taking excessive Torque to eliminate this play, it's because the inside of the riser has bottomed out on the top of the steering tube. Put a short spacer under the riser.
👤I'm a big guy with 220 lbs and found myself hunched over when riding. The stem extender brought my handle bars up so I can ride in a better position and it looks great.
👤The expectations were met. Good length. If you don't use the full length, the excess will stick up from the handlebars, which is a possible safety issue. First you have to figure out what riser length you need, then you have to buy it.
👤It was a noticeable difference on the first day. I had groin, back, and next pain after riding so far forward. A guy with a bike. I also want to give up my bike. Win! It's easy to install. Looks great! I'm hoping this less than$15 item will make me happy after biking days. The game is changing now! Simple concept is great.
👤I was able to ride my new mountain bike with less pressure on my hands and wrists, because the handlebars were raised with this extender. LA gave a tip on excessive play in the front fork from the riser extender bottoming out on the top of the steering tube after its initial installation. LA's tip was to place a second spacer on the steering tube below the riser extender to raise it slightly and then tighten it down to eliminate the play in the front fork.
👤The bike handle was made higher by this extender. I'm happy my husband found it. We ordered one for our daughter's bike as well. It was easy to install. It's much more comfortable to ride a bike now. You'll be fine ordering this extender.
👤Lifted my handlebars. I'm really pleased with this purchase because I was sitting for a long time. Sturdy metal, and fit my bike well. The bikes brand is Specialized.
Bicycle quill stem adapter products from Ultracycle. In this article about bicycle quill stem adapter you can see why people choose the product. Upanbike and Upanbike are also good brands to look for when you are finding bicycle quill stem adapter.
Ultracycle, Upanbike and Upanbike are some of the best brands that chosen by people for bicycle quill stem adapter. Find the detail in this article. Wake, Satori and Sunlite are also brands that their products are worth to check.