More flexible handling, light weight, easier climbing force, comfortable operation, convenient bicycle fork extender are some of the things that make cycling comfortable. Installation is easy with the fito twin-bolt design. You don't have to remove the shifter or grip in order to install the handgun bar. The material is light weight and anti-rust. For 1 inch (25.4mm) hands. The center measurement of the hand bar might be different from the end measurement. Before purchasing, please make sure you know the measurement of where the stem is located on the handle bar. The measurement is 7/8" (22.2mm). Also available in silver. Please search for the ASIN number "B00ATT6TSO".
👤The aluminum stem has a nice finish. An excellent replacement for a steel stem hybrid. Add bars and ounces. The bars and stem combo are lighter.
👤This stem allows you to raise your handlebars in a comfortable way. I bought this one because the original stem on my bike could not be raised very far. I am very happy I did. There is a plate on the front of the bike that can be changed out. There is a The stem is working well and I am very comfortable on my bike now. I had it installed at the bike shop and it was done in a day or two.
👤This is a high quality product. I needed to replace a cracked stem on my vintage mountain bike. I wasn't expecting much because of the low price. I was wrong. The finish and quality exceeded my expectations. This is a long stem. I was able to get a bit more rise out of my bars, which helps my back. The product was very good.
👤The grip on the handlebars is too loose. The pipe has 1 inch center. There is a The handlebars turn even after the 2 screws are tightened. I had to drill a couple of holes to fit the handlebars. There is a This is not well designed if it is US made. It is well-made, but it is disappointing.
👤It looks good without the scratches. I was expecting a better package. The threads weren't of the quality and the bolts were stiff. I paid more for it but it works. Will update review once installed on my bike.
👤The screws don't sit down all the way. It was almost like there was the wrong size. Sending it back. I have a replacement for my review. The second one fit perfectly. It looks great on the bike.
👤They need to use lead in the alloy. Heavy for aluminum. If you want to keep your weight down, you may want to spend more money. It's great for the price and what I'm putting it on.
👤The product was easy to put on.
Sunlt Stl 10x.833 is a Amer Size. The construction is lightweight. It's great for builds of Classic ATB and Touring Bike. The safety is certified by the EN.
👤I have used similar parts before. Probably from the same company. The forgings look the same. These work well. The reasons I have purchased them is very important. It fits in a steer tube fork. The bars can be disassembled without removing tape/brakes/brifters. If you remove the 2 sockets head cap screws, you can remove the whole bar without stripping it or messing with the bar. The weight is something I don't like. It is large. This doesn't really matter if you are retrofitting a hybrid or department store bike. The weight of this product is a problem if you want to change the control geometry and fit at light weight. There is a display card. At the price point, finish is acceptable. You will not be disappointed if you don't expect high end attention to detail. There is a The brake cable stop hole was thoughtfully added by the designer. If your bike's headset stack isn't long enough to accept a steer tube brake cable hangar, it's useful. I think the route is better than nothing. There is a There is a supplier of 1" risers. Profi... I bought a stem for my project. The one going into the bin is the one that is going into the spare part bin.
👤The dimensions appear to be the package dimensions. The minimum height stop is provided by the stem that is almost 5 feet long from the bottom of the nut to the shoulder. The overall length from the bottom of the nut to the cap is about 7.5". There is a handlebar. It's about 3.35 inches from the center of the handlebars to the center of the stem. It looks like it will fit on my Trek mountain bike. I was looking for something with more vertical height, but this looks to be a good quality, so I will give it 5 stars and try it out.
👤The stem is the right balance of cost and craftsmanship. I was looking for a stem that had been made well enough to smooth out the rough welds that some other companies leave. The stem transformed the commuter bike I was building out of an old cannondale ten speed into a modern Dutch style. I highly recommend Origin8 products for converting older bikes into a less agressive position.
👤The stem is fine despite the description being a bit confusing. It was well made and lightweight. It works perfectly with my old Raleigh Super Course Mark II. There is a The tolerances are good and the bolts are difficult to line up. There is a To be clear. There is a The stem is long. There is a The handlebar is 25.4mm in diameter.
It's suitable for most road bike, mountain bike, track bike, BMX, etc. The stem is only suitable for 25.4mm handlebars. It is adjusted. The product equip with 5 gaskets can increase the height up to 100mm, it can adjust the gasket to fit your need freely, reducing the pressure of waist effectively. The bike handlebar riser is made of aluminum and has a polished finish. It's widely comparable. Don't worry about buying a bike accessory that isn't compatible with your bike. Their bike fork stem extension is suitable for most bikes. Easy installation. You can connect the original front fork stem extender. Light weight and flexibility make it easier to force when climbing. It is hard to loose the handlebar extender. Work on mountain bikes, road bikes, and BMX.
👤The handlebars of my bike were lower than my bike seat. If I rode the bike as a road bike, I would have hybrid tires for off-road biking. The Zukka extender was easy to install, using up all 5 included rings and the 3 that came with my bike. All fit perfectly. Make sure you use an Allen key to tighten things up. The perfect ride resulted in no back pain from straining my arms and upper body.
👤I can sit upright on my bike. Solid construction. The pinch bolts of the riser and stem need to be snug to be able to move. Align everything and hold while you tighten the top bolt to eliminate any play in the headset bearings. The inside of the riser has bottomed out on the top of the steering tube, so if you find it is taking excessive Torque to eliminate this play, it's because the inside of the riser has bottomed out on the top of the steering tube. Put a short spacer under the riser.
👤I'm a big guy with 220 lbs and found myself hunched over when riding. The stem extender brought my handle bars up so I can ride in a better position and it looks great.
👤The expectations were met. Good length. If you don't use the full length, the excess will stick up from the handlebars, which is a possible safety issue. First you have to figure out what riser length you need, then you have to buy it.
👤It was a noticeable difference on the first day. I had groin, back, and next pain after riding so far forward. A guy with a bike. I also want to give up my bike. Win! It's easy to install. Looks great! I'm hoping this less than$15 item will make me happy after biking days. The game is changing now! Simple concept is great.
👤I was able to ride my new mountain bike with less pressure on my hands and wrists, because the handlebars were raised with this extender. LA gave a tip on excessive play in the front fork from the riser extender bottoming out on the top of the steering tube after its initial installation. LA's tip was to place a second spacer on the steering tube below the riser extender to raise it slightly and then tighten it down to eliminate the play in the front fork.
👤The bike handle was made higher by this extender. I'm happy my husband found it. We ordered one for our daughter's bike as well. It was easy to install. It's much more comfortable to ride a bike now. You'll be fine ordering this extender.
👤Lifted my handlebars. I'm really pleased with this purchase because I was sitting for a long time. Sturdy metal, and fit my bike well. The bikes brand is Specialized.
The handlebar mounting diameter is 22.2mm. Installation caliber is 28.6mm. The material is aluminum.
👤I have a tire that is turning out to be sick, and I am doctoring it up. Thank you.
👤Great product! Very cheap. The threads weren't well made. Re- is what I recommend. The threads are being tapped. Half of the threads needed it.
👤Good bolts and good threads. There is a No complaints!
👤My handlebars are locked in and I am not going anywhere.
👤It's easy to install and matches up with the other accessories.
👤It was a perfect fit for my steering tube and handlebars.
👤It won't hold your bars in place. It will break when you tighten your bars.
👤I think my old one will do until I have more money.
The stem riser is the best for most bicycles. A forged alloy alum construction. The angle can be from 0 Degree to 90 Degree. The bar is 22.2mm long. The handlebar has a diameter of 25.4mm.
👤It arrived quickly. It's easy to install. I can ride my bike in comfort now.
Old and vintage bikes are for bike. The bike stem only fit for the Handlebar diameter. The lightweight and durable MTB stem is made of high-strength T6 aluminum alloy. The easiest way to install a bar is to connect up the original fork stem with a four bolt bar clamp. A universal short bicycle stem is suitable for most road bikes. The bike can be upgraded. Help riders find the right position.
👤The Wake stem has a 30 degree rise and 50mm length, which made it a perfect match for my bars. I can now ride in comfort without feeling like I'm going too far forward on my 1999 Specialized FSR Sport. The stem was easy to install. It's time to shred it with the kids.
👤It does a good job. The awful brick design doesn't work for me, but some people like it. I bought it to try the size. I'll buy a better one now. It works well.
👤This stem works great with my Wake bars, as I upgrade my hardtail to a more down country/ trail setup. I needed to rise a little more in my stance.
👤The item was damaged when it arrived. The paint quality is low. I'm going to give this item back for something better.
👤The $10 wake stem is lighter in weight and has more screw holes, but it's not as strong as the $10 stem, and it's not as cheap, but it's better for it's design and I would trust it with rough conditions. I would recommend this over any of the other $20 stems because I am very pleased with my use of this.
👤The product was very good. The shipping estimate was not correct.
Most mountain bikes, road bike, fixed gear bicycle, BMX, and MTB have a universal bicycle stem. The handlebar is 25.4mm in diameter. The fork tube has a diameter of 22.2mm. The stem length is 40mm or 80mm. There are millimetres. The stem rise angle is 30.
👤The bike I bought was too large for me. The handlebars were brought down to get the right fit. If you want to mount the handlebars, you will have to remove the levers on the other side. It was very easy to install.
👤It's easy to install. When the stem is raised to about a half inch lower than the max, there is no flex. The upper position. There was no side slip. Our new Schwinn trike is perfect. There is a Ps. I have been working on bikes for 50 years. I usually don't like these kind of stems because of the flex, but the price on this one is right and the bike fit is perfect. Great deal.
👤I had to raise my handlebars to take some of the stress off my shoulders. The bike stem worked well. It was easy to install, and seems like it was good quality.
👤The stems put you on the bike so you can enjoy your ride without neck and back problems. It makes your ride more efficient.
👤The stem was too small for me. The finish and design are very nice.
👤The stem's wedge wouldn't grip the inner steerer tube, which allowed the handlebars and front tire to be moved in opposite directions, so I wouldn't give it a 4 star rating. The old wedge worked after I replaced it with a new one. The rest of the stem was advertised and works.
👤My kid's bike has more life because the handlebars can now be raised, so it will fit him for a few years.
👤It isn't a nitto. It is also not $70. It does its job perfectly and doesn't look bad.
👤I bought this because I wanted to get more height in my handlebars and move it closer to the seat. I question the quality. I think I might have gotten a returned item as the finish had some scratches near the mount, but it's not important for me as my bike is vintage and scratched. The plastic cap does not fit, I had to use the one that came with the bike, the shaft wedge function is questionable, and the handlebars came off center while riding on bumpy ground. I may have to use the stock stem's wedge to get around it. I found that the Torque on the handlebars needs to be tighter than I thought it was, and I am afraid that it might break, so I needquing specs to help. If it breaks, I will tighten it and ask for a return. For the price, and re-using of existing parts, it is okay.
It's perfect for most bikes. The quill riser extender can be used on most bikes with a threadless steerer. The material is aluminum alloy. The packing is 1PC. The total length is 160mm, the bottom diameter is 18.6mm, and the steering tube is 22.2mm. It can be used for a long time. The oblique opening causes the screw rod, oblique nut, and the tube to be in a different position after the heart is inserted. All size bicycles are suitable.
👤The look of it is nice. It could have been a bit longer but this is fine.
👤Good thing. Light weight. A delivery person was sick.
Raises Stem another 8 inches. Stem rise angle: 0-7, Handlebar diameter: 25.4mm (1"), Stereer Tube diameter: 28.6mm (1-1/8"). The weight is 150g and the length is 32mm. A universal short handle bar stem is suitable for most bikes. It is made of high-strength T6 aluminum alloy. Simply connect the original fork stem to the new one. The four bolt bar is in position. The bike can be upgraded. Downhill, Chongshan, climbing, are very comfortable.
👤This was easy to install. The screws had grease applied so they were ready to install. For my purpose, fit and finish were fine. Would purchase it again. Hopefully, I won't need it.
👤I bought this for my daughter. The frame was large for her and the stem was small. The stem is too short for mountain biking and it has been out for a couple of test rides. The front end is hard to control and knees knock into the bars. The quality of the stem construction and bolts is good, and it's probably fine for road or commuter bikes.
👤Strong, light, cheap. I would not put this on my bike, but it works great on my cruiser.
👤It fits my bike well and makes me more comfortable on the bike. I can't tell you what kind of alloy it is, but it feels very solid and well made. I like how they've rounded the corners, fewer sharp edges mean less skin left on the trail. There's nothing I can do about my steering. I can't say that about some of my brand stems.
👤I need one of the shortest stems for my handlebars. The lightest 3) Inexpensive The bonus works out of the box, no dramas, no bad surprises, just a decent looking bonus!
👤Great product. The bike was put on and taken for a test ride. I didn't think about it. It works well. No issues.
It's easy to connect up the original fork stem. Two bolts hold the bar in position. Installation is easy with the fito twin-bolt design. You don't have to remove the shifter or grip in order to install the handgun bar. The material is light weight and anti-rust. For 1 inch (25.4mm) hands. The center measurement of the hand bar might be different from the end measurement. Before purchasing, please make sure you know the measurement of where the stem is located on the handle bar. The measurement is 7/8" (22.2mm). Also available in black. Please search for the ASIN number "B00N2IIWVQ".
👤My body wasn't handling the low, crouched riding position on my vintage Trek very well at 45. I almost went with a newer style. I am very happy with my decision after receiving this. It is high quality and improves my stance dramatically.
👤We'll build this aluminum stem. It has a nice look. It's light. I didn't understand the size, it was just 1mm. This item is definitely recommended by me.
👤The item was in a bag that didn't fit it. It was scratched and dirty. I think this was installed on another bike. I don't know.
👤The ZOOM handlebar stem is exactly what I wanted it to be, it's nice, smooth finish, appears to be quite solid and strong, and it's clean. It alleviated strain on my back, wrists, and palms, and allowed me to safely raise the handlebars on my vintage Peugeot AO-8. It is attractive and functional.
👤I would order it again. It works well on my bike. My son was taught how to install it.
👤I raised my seat position. The rides are more enjoyable.
👤Good stem. There is a The replacement part could not be tightened. There is a I could tighten the bolts to secure the handle bars because the stem gripped them very well. The product was very good.
👤A nice stem. Exactly what I was looking for. No issues with the fit of the bar. It's easy to change bars. The beach cruiser is a part of the movie "Frankenweenie". It's a happy day.
Brand new and high quality. The bike can be upgraded. Downhill, climbing with them very comfortable. The construction is forged aluminum. The two-bolt handlebar clamp is a bolt. The safety is certified by the EN. The bead blast finish has laser etching.
👤I trust this enough to put it on my grandson's bike.
👤It was my fault for the size issue. It was fixed. I love it. Cannondale is best from the east.
👤I needed to convert a mountain bike to a town bike. I can always rely on Origin8 to have what I need.
👤I bought this to fix my old GT outpost. The stock stem gave me the ability to put the bars exactly where I wanted them, I had to lean over too far with the stock stem. Being open in the front is a nice touch and it's a light and sturdy vehicle. I would definitely recommend this product.
👤The stem is very well made and works well with handles bars.
👤The purchase of a new stem is something I love. They sent me the wrong stem.
Bicycle quill stem 22.2 products from Fito. In this article about bicycle quill stem 22.2 you can see why people choose the product. Origin8 and Zukka are also good brands to look for when you are finding bicycle quill stem 22.2.
Fito, Origin8 and Zukka are some of the best brands that chosen by people for bicycle quill stem 22.2. Find the detail in this article. Senqi, Donsp1986 and Osagie are also brands that their products are worth to check.