Best Bicycle Quick Release Skewer Nut

Skewer 26 Jun 2022 10+ Comments Open

1. CYSKY Release Skewer Bicycle Mountain

CYSKY Release Skewer Bicycle Mountain

Repels humidity and protects it from the elements. It is made of iron and is practical for most bikes. The hub quick release lever is longer for the rear wheel. Short release lever for front wheel has a hollow shaft. The lever for the rear wheel has a hollow shaft size. You can use it to fix your mountain bike. It's the best choice for cyclists.

Brand: Cysky

👤If I return the old one, I'll be off the road until a new one arrives, since I'm only 175 lbs. and an axle should never bend with such light use. It's better to pay more and do the job again.

👤Not the size that was advertised. It would be a 9mm axle. They don't fit in bike dropouts because they measure close to 9mm on the front and close to 9mm on the rear. Just ordered a new one. Hopefully this was a one off. The second set was the same size as the first and the races were bent as described by other reviewers. Unless you can not find any other set, I wouldn't buy these.

👤Today, it was installed. The 135mm dropout is the most common size. I can use the spacers from previous builds. I was lucky to get it adjusted to within. I decided to test ride it after installing the wheel back on the bike. I weigh about 200 lbs and am riding a bike casually up the street when I hear a rubbing sound and feel resistance pedaling. I inspect the bike on my bike stand after walking 200 feet home. I just installed a new axle and it was bent all the way until it hit the inside of the freewheel. I should have done that, but I saved myself some headaches by buying good axles.

👤I needed to remove the dust cover to swap out solid axels. I nicked the cone after tapping on the dust cover. The cone should not be soft. I hit the original cone to make sure it wouldn't nick. I hit it hard, but it didn't hestitate to hestitate. I used the old cones, but I had to use the axle. Hopefully it does not kill someone. I installed one of the cones from this set on another person's bike because the other ones were taking a long time to arrive. He had it on his bike for a while. I wanted to change it so there wouldn't be any issues. I wiggled the rim to see how it was after he stopped to talk. The cone was very badly warn when I removed the wheel to check it out. I replaced it with a better one. A good quality set of bamboo kitchen axels. The alta is junk soft metal. If you see any marks on the metal, hit the corner of a cone wrench. I use a lot of grease so it's not a lube problem.

👤You would think that you can go wrong, and perhaps I'm just unlucky. I received the parts in good time, but I couldn't get the rear wheel to spin right because of the rear skewer. I replaced and regreassed the ball bearings that had fallen out. I tinkered with it for a couple days, as the wheel was crooked and touching the frame. I pulled the axle out and it was bent. I checked the front and rear of the vehicle. The pro's to this product are obviously the price, and that's it, the material quality isn't great, the plastic on the locking lever after little use is starting to degrade, the springs on the skewer are fragile, and of course, the threads wanted to strip easily Not happy.

2. Ruosaren Stainless Bicycle Skewers Mountain

Ruosaren Stainless Bicycle Skewers Mountain

You can order now and pay free. They can provide a 1-year warranty because they're so confident in their product quality. It was made in Taiwan. Premium 304stainless steel bolts and steel nuts are stronger and safer than regular axles, so no need to remove the threads when tightening the skewers. The front and rear skewer are compatible with most road bikes. It is not compatible with the trainer stand. Easy to use, quick release wheels can be removed from the bicycle frame and replaced without using tools. The front quick release is 15 cm long, the rear quick release is 18 cm long, perfect for most bicycles with a 26 inch wheel. All components are machined to deliver maximum strength. The anti-skid washer is shaped to grab your bike. Premium washers are resistant to high temperatures and can be used for a long time.

Brand: Ruosaren

👤There were two major issues with this product, plus lackluster service attitude from the seller. When the skewers are closed, the handles on the brakes go into the discs. It's useless for any bike with disc brakes. They are so bad that they may interfere with spokes. These don't stop because they are not designed to. We only got 3 skewers because one of the sets had been ripped open and missing an entire skewer. I contacted the seller and they just told us to go to Amazon. Even if it's a fulfilled item, you can still be more involved. This item should be avoided entirely.

👤Only the 180mm skewer was sent. The descriptions say a pair. I want my other skewer.

👤The quick-release clips arrived in 36 hours, nice look, good quality, and I was happy with my choice. I bought it to replace a faulty clip for my new Schwinn hybrid bike and it fit perfectly.

👤As soon as I pushed to close it, it was a good idea to go into the store.

👤My kid is being towed in his bicycle trailer. This was a sturdy replacement.

👤The trick was done by these. Thank you.

👤It holds firmly. It has worked well under stress.

👤Great product. It took a few seconds to install. Fit my computer.

3. Rowiz Release Bicycle Skewer Mountain

Rowiz Release Bicycle Skewer Mountain

You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. The Performance Quick Release Axle Skewer Set is made of aluminum. Most bikes are durable and practical. The front and rear Skewers have the same size. 185mm/ 7.3 inch Iron+ aluminum alloy is black. You can use it to fix your mountain bike. It's the best choice for cyclists.

Brand: Rowiz

👤I bought a used bike at a yard sale. The front quick release was lost by the previous owner. This replacement works. It does the job, but it is not as well built as the original. I have been able to ride the bike. You get two for the front and two for the back for the price.

👤It was nice to have a couple of these. They were used to replace a broken one on my sons Schwinn. They were very happy with the price and the shipping. Hope this helps others.

👤The parts look amazing and work well.

👤The set works well, but the spring could be better.

👤The best deal. I now have an extra set. Came much sooner than I thought.

👤The hollow axle is not included.

👤These are inexpensive skewers that are shipped by Amazon. They are individually bubble wrapped and then put in a cardboard box. I ordered other ones that were shipped from abroad to compare, and they arrived in plastic baggies without any protection, and they were pre-scuffed, worn looking. There is a These work are exactly what they are described to be. I've tried many different vendors with similar product descriptions and pictures and they are all the same. I highly recommend buying from local sellers. It's a little bit more expensive, but you get a better product.

👤These are inexpensive skewers that are shipped by Amazon. They are individually bubble wrapped and then put in a cardboard box. I ordered other ones that were shipped from abroad to compare, and they arrived in plastic baggies without any protection, and they were pre-scuffed, worn looking. There is a These work are exactly what they are described to be. I've tried many different vendors with similar product descriptions and pictures and they are all the same. I highly recommend buying from local sellers. It's a little bit more expensive, but you get a better product.

👤The release was easy to use and practical as I removed the bike from the trainer every other day. I was surprised to see the bar bending after a month of use. I don't have confidence in using it for rides outside.

👤I needed a quick release and got these.

4. Alomejor Release Skewers Bicycle Mountain

Alomejor Release Skewers Bicycle Mountain

You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. ? The bike accessory is robust and long. It's suitable for most bikes with 26 inch wheel, and can be used on mountain bike or road bike. The hub quick release lever is longer for the rear wheel. ? The 1 pair of bike bicycle cycling wheel hub skewers is a perfect performance. ? It's easy to remove the wheel from the bicycle frame and replace it with one that's equipped with quick release mechanisms. ? Quick release skewers are made of good quality iron and aluminum alloy, which is high strength and durable to use. ? The bike skewer can be used to repair a mountain bike. It's the best choice for cyclists.

Brand: Alomejor

👤It's easy to install, but the description should tell you the size of the hubs that it fits.

👤The fit for my daughter's bike was great.

👤It took a while to arrive since it was shipped from China.

5. JSM Bicycle Flanged Safety Washer

JSM Bicycle Flanged Safety Washer

The package includes 2 nuts. It is made of high strength steel. 6 sets of safety washers and 3-size flange nuts are suitable for most bicycle replacements. The NUT WM FRT 5/16x26 FLANGED (2 sets), NUT WM FRT 3/8x26FLANGED (2 sets), and Metric NUT FLANGED M10*1(2 sets) are all Spec.

Brand: Jsm

👤I was expecting two sets of nuts. I think a bike uses two sets of nuts. There are two sets of two for the front and two for the rear. There are 4 nuts. The wording is poor. You need to place two orders if you need nuts for your wheel.

👤They sent the wrong kit after I ordered from a different vendor. The second attempt worked out great. I wanted to mount her bike to a stand without damaging the threads.

👤They were bought for a kid's bike. They fit.

👤I would have preferred to buy a set of nuts. I was able to fix the bike wheel.

6. DEERU Mountain Bicycle Skewers Release

DEERU Mountain Bicycle Skewers Release

Click here to see more product details for the complete list. The cam action lever is smooth. A wide color range with a deep color finish. The hub nut was Extruded. The diameter is about 4.5mm. The front skewer has a size of about 150mm. The weight of the front Skewer is 46 grams. The rear Skewer weight is 51 grams. Most road bikes, mountain bikes, and BMX are compatible with steel and aluminum alloy. It is easy to set up and install, and you can use your bike like new. The application is for something. The majority of the bike is compatible with the axles.

Brand: Deer U

👤The product lengths did not fit as expected. The length of the skewer and the pivot washer is provided by the seller. If you measure the distance you need to span on your bike frame/fork that will not correspond to the measurement this seller provides. My bike has a 170mm distance from the outsides of the frame slots. The 180mm length is not accurate. The skewer is too long. It is only 160mm. The length of the skewer should be known by the seller.

👤The front skewer is smaller. The functional length of the shaft is 123mm. There is a I needed an accurate measure to work with a new suspension fork, but the skewers seem to be made well. There is a I went back to shopping instead of riding because these skewers went into the spare parts drawer.

👤Returning. The looking mechanism is made of plastic and metal. Brand name skewers are about half a millimeter thinner. There is a They are shorter than normal. For a critical component like this, you should spend $10 more for a brand name.

👤The skewers have a defect. I didn't notice it at first because they seamed well made, slid through the wheel easily and tightened up nicely, but I noticed the skewer was about. The thickness of the metal on the skewers causes the wheel to jiggle because they are thinner than the original ones. I had to give this product a 1 star because of the wheel wobble.

👤I bought these for a friend who needed me to fix their bike hubs. I had to return them because they were off to the point where they weren't usable. They were off by 12mm or 1.2 cm.

👤When the bike nut was lost, I was worried that I would have a hard time or have to spend a lot of money on replacement parts, but this piece did the trick for a low cost.

👤I think these would work, but they are more orange than gold. I ordered a seat post clamp from the same vendor and thought the color should be the same for both items. The seat post clamp was the correct gold color, but the picture of the skewers on Amazon looked like seat post gold, not orange. I can't use these because the color is not the same.

👤The front of my bike needed to be replaced. Went ahead and got the rear set as well. They fit right. I'm happy.

👤A picture shows a metallic gold, but it is closer to a pumpkin.

7. SHIMANO Ultegra Front Quick Release

SHIMANO Ultegra Front Quick Release

The complete quick release is 163mm.

Brand: Shimano

👤The front wheel of my 2020 Cannondale Trail 6 mountain bike has a perfect fit for the Ultegra 6800 QR skewer. It is a more secure replacement for the lower quality skewer that fell apart after a few months of riding. I am very happy with this replacement skewer.

👤The sending unit on my skewer went bad and I needed to replace it. I looked at many cheaper and more expensive units. I didn't need either front or rear pairs. There were many reviews of other items that indicated a lack of holding ability. What can go wrong with a Ultegra? It arrived Thursday evening and was installed the next day.

👤My skewers weren't very good on my bike. I ruined a sealed bearing because my front wheel wasn't going on aligned. I still had the issue of the wheel not getting aligned after the shop fixed it, and the skewer had to be raised to stop the wheel play. I solved the issue by taking my skewer off of my other bike and trying it on the trouble bike. I bought this Ultegra QR, and it works great.

👤A quick ship. It was a perfect match to the rest of the 6800 set.

👤You don't want to worry that your skewer will loosen and let the wheel go while you're riding, because you don't have it. I bought a cheap front skewer to replace a worn out one on my mountain bike, but it was coming lose on the first use. I upgraded to the Ultegra after reading some reviews online, and haven't had a problem since.

👤My issue of front wheel becoming loose on braking was relieved by this quick release. I have installed this on my mountain bike. The hub width is about 120mm and it fits. The issue of wheel loosenment is over since installation. A good product.

👤I like the price point and quality of the product.

👤It's a nice skewer. It's got a good name, but not much to say. I got a set after the TSA was able to bend the skewers around the hubs on the wheels.

👤20 !

👤135mm

👤2133mm 163mm

👤

👤

8. Alloy Quick Release Clamp Seatpost

Alloy Quick Release Clamp Seatpost

The Campagnolo chainring nuts are double-ended. You can adjust your bike seat height quickly and easily with the quick release design. The material is compatible with road bike and mountain bike. The cam action lever is smooth. The nut was Extruded. It allows you to adjust the seat height without using tools. Axle is about 6mm. The skewer is 56mm long. The weight is only 38 grams.

Brand: Lohas Select

👤A single piece of equipment was received. The picture in the description is not real.

👤At the time of my review and order, the pictures indicated that two bolts were included in the purchase. Only one was included. The pictures are very misleading.

👤I bought a pair because I have 2 on my bike and one is missing a washer. I hope the Washer works with mine and holds up, but I don't think it's worth it. If the washer holds up for a while, I'll order another so they match on my bike, but if I was using the whole clamp, I'd look for another one.

👤It's pretty easy to remove chain links with this items. It's a pain in the A** to link back together. The chain doesn't sit between the metal flanges and this causes the push rod to not line up with the chain pin. The tool is great for small jobs. If you're in the habit of removing and installing several chains, I would recommend getting something that's more accurate.

👤The seat won't be rotating or lower because this is a very light duty clamp. The plastic saddle with a thin metal shell is not up to the job.

👤I used 4 of them on my ATV basket rack. I tried using clip pins to remove the bolts that were provided with the rack. The pins made it easy to remove and replace the basket, but they didn't offer enough pressure to hold the basket firm. I used some rubber washers to remove the basket, and it stays firmly attached. It was perfect for my needs.

👤It is exactly as described. I think it will work on the seat ones as well, because it fits the handlebar adjsutment spot. When the originals bend out, you need to grab a couple extra. Happy customer!

👤I didn't like the paint finish and it's hard to adjust the tightness of it because the screw doesn't spin easily. It keeps my seat in place. I don't have to deal with the screw issue because I didn't have to adjust it often.

👤Maybe for a child's bike.

9. PETIT MANON Release Skewer Mountain

PETIT MANON Release Skewer Mountain

Ensure the security of your wheels at a fraction of their replacement cost. It's made of high-quality iron and is suitable for most bicycles. Short release lever for front wheel has a hollow shaft size of approx. 10.8 cm. The lever for the rear wheel has a hollow shaft size of 14.5 cm. The 19 cm is 7.48in. The road mountain bike and BMX can be worked on with the same axle. The wheels with quick release can be removed from the bicycle frame and replaced without tools. It is the best mountain bike parts.

Brand: Petit Manon

👤The parts are pretty standard. I'm guessing from China. It won't fit my hubs. The bearing race is not the right diameter. It's not going to fit into a nicer hub, but I'm pretty sure it will fit your Huffy. I think I'll throw it in the trash.

👤It broke less than a week after it was professionally installed.

👤The metal part was soft.

👤It was easy to install and would buy again.

👤It's cheap. The springs are cheap. If I were to do some heavy mountain biking, I would upgrade to something better, but I think it would work out fine.

👤I think my bike was just big, but they were rotating with the wheel.

👤The product looked great but was not the right size.

10. Bicycle Titanium Skewers Ultralight Release

Bicycle Titanium Skewers Ultralight Release

It is durable and lightweight around 20g. Made of titanium, it is durable, sturdy, and high strength. The construction is anti-corrosion. The bike has front hub O.L.D 100mm and rear hub. O.L.D is 135mm. The material made skewers is ultralight, adding no heaviness to training or long time riding. It is possible to remove the bicycle frame and replace it without using tools by opening and closing the cam lever. The quick release is not compatible with single speed bikes.

Brand: Mth

👤The screw mechanism is easy to operate. The lever is a bit smaller and harder to get into the spherical washer than expected but works well once it's line up. The weight is up front and down the rear.

👤The skewers seem to be of good quality. I don't know if they are titanium, but they are very light. The skewer is on the long side. It might be 1/2 from the non-lever side. I am happy with the quality.

👤The skewers work well. I only have about 40 miles on them.

👤The set is super lightweight. My bike is a bit lighter now, but it is still hard to open up due to the lever. There is a It's awesome other than that.

👤The skewers look great on my Lemond Arrive. I got here early too. There is a Thanks!

👤Looks good and works as expected.

👤These are too long for road bikes. Returned.

👤The skewers look great. If that means anything to anyone, these are made in Taiwan. There is a The Skewer end cap is flat at the end and not cone shaped like most others, so the Skewer threads stick out.

11. DEERU Bicycle Release Seatpost Releases

DEERU Bicycle Release Seatpost Releases

The quick release lock design makes it a great tool. The cam action lever is smooth. The nut was Extruded. A quality quick release seat skewer. The diameter is about 8mm. The skeewer is 50 millimetres. The Skewer weight is 38 grams. The material is suitable for Stationary Bike and other equipment. Do not use the 25.4mm/31.8mm.34.9mm Bike Seat Clamp. The seat binder bolt needs to be M8 and this Seat Clamp Quick Release Lever is a simple replacement. It allows you to adjust the seat height without using tools. The seat binder bolt needs to be M8 and this Seat Clamp Quick Release Lever is a simple replacement. It allows you to adjust the seat height without using tools.

Brand: Deer U

👤The vise is easy to open and move, it is on the offset corners. This has held up well so far because I'm not doing any industrial sized projects. I have seen reviews that said they were bad for having plastic parts. You should replace the plastic with metal nuts and washers if you want it to fit your drill press. I had them on hand and installed them quickly.

👤I use these to mount my drill press vise. It was perfect for what I needed. I added a few washers. It was perfect.

👤I used the interchangeable accessories on my ryobi to modify it. The screw was stripped and the nut was twist on. I had to remove the original screw and drill out the holes for the quick release clamp. So far, so good. I bought a replacement for the original one. I believe it would strip again in the future. These should be standard from the factory.

👤Seat replacement for a bike. If you are reading this, it is most likely that the plastic seat bolt that came with the original equipment has failed. The DEERU is better than the original parts. See the provided pictures for comparison.

👤I bought these to fit a drill press vice. These guys allow me to move my drill press quickly and then crank it into place, which is much better than wing nuts. Awesome!

👤This works for one bike, but not another. It depends on the collar on the bike. I would recommend buying a collar rather than a pair of clamps. I don't see how you can know if these are compatible with an existing collar.

👤The product looks good, but beware, they are thick. Too thick for what I needed. They don't fit through my seat post, so I had to find a thinner version. I should have measured the fit.

👤I used these to hold my drill press vise. Works great after getting some fender washers.

Summary

What is the best product for bicycle quick release skewer nut?

Bicycle quick release skewer nut products from Cysky. In this article about bicycle quick release skewer nut you can see why people choose the product. Ruosaren and Rowiz are also good brands to look for when you are finding bicycle quick release skewer nut.

What are the best brands for bicycle quick release skewer nut?

Cysky, Ruosaren and Rowiz are some of the best brands that chosen by people for bicycle quick release skewer nut. Find the detail in this article. Alomejor, Jsm and Deer U are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com