Best Bicycle Phone Mount Charger

Mount 8 Feb 2023 10+ Comments Open

1. Bone Charger Bicycle Holder Motorcycle

Bone Charger Bicycle Holder Motorcycle

The 2in1 bike phone mount is perfect for long-distance rides, it holds your phone and an additional portable charge to extend the battery life on the road. The battery is not included. Flexible silicone bands fit most 3-6.5" phones securely. Large cases might have a tighter fit. Patented quick release mounting strap fits various types of bicycle stems. Easy to install and remove. Soft-touch silicone material absorbs bumps and protects your devices and accessories. Buy with confidence with their 100% satisfaction policy. They offer a replacement or refund for any bike phone holder issues.

Brand: Bone

👤I need an aux battery for long bike rides when I use the gps on my road bike and it chews up the phone battery. I am using this with my phone, and it fits perfectly. I never use the side buttons for bike riding, so who cares. No issues with my battery. I have to put it on the tightest hole because the stem is narrow. It only shifts around on rough roads, so I added a little tape underneath to make it work. Good value for money.

👤There are 2 main problems with Silicone handlebar phone mounts. Silicone is hard to stretch over the corners of the phone and they tend to spin on the handlebar after a while. Both problems were solved by this mount. Zero spinning is achieved by the stem mount orientation combined with the extra shock absorbing support. The corner straps are easy to install. The phone and power pack are not going to fall out. I can't imagine a better solution.

👤This is the only phone mount that stays on the handlebars on a bumpy road, and I bought five other mounts. It doesn't have to be strong because it's stretchy and thick. I'm not sure why other companies haven't thought of this. The clips broke because my phone is a large one, or the other ones came loose at the mount. You can save a lot of money by buying this one. If you want to use the gps on your phone instead of a separate piece of equipment, there is room for almost any size portable battery pack. This mount is amazing.

👤Works well. I used this to mount my phone and Juice Pack on the stem of my car. Trek Stache 5 is a film. I can use the Trailforks app while I ride. The trails at Marsh Creek were held up for 4 hours. My phone never fell off when I was there. It didn't have to be adjusted during the ride. It held its strength over roots, rocks, and drops. There is a support pad on the underside. My friend cut the part off with an exacto knife so that he could mount it to his top tube, even though it didn't fit the stem on his Specialized Fuse Expert. Pick up a shorter lightning cable to keep your cockpit clean.

👤I needed a phone mount to support my volunteering activities as a bike marshal. I used to keep the phone and a small battery in my jersey pocket, but would have to stop and pull it out to answer calls. I was looking for a stem mount that would fit a battery and allow me to run gps tracking apps to let the organizers know where I am on the course and answer calls on the phone. The mount held a battery the size of a phone so I could use it to charge other things besides my phone. The rubber mount is stretching thin when I try to mount it securely. I have not experienced it moving too much or losing grip on the phone, but it does not allow a super secure mounting. It would be great if there was more reinforcement around the loop so that the mounting strap doesn't get stretched out. It is a good mount and I like it.

2. Aluminum Adjustable Handlebar Motorcycle Compatible

Aluminum Adjustable Handlebar Motorcycle Compatible

Buy with confidence with their 100% satisfaction policy. They offer a replacement or refund for any bike phone holder issues. The lightweight aluminum alloy mount is much more durable than other plastic bicycle phone holders. You don't have to worry about your phone breaking due to bumps or shocks. It's easy to install, just attach the handlebars with a screw and you're good to go! The Universal Handlebar has a size that can be adjusted to fit any handlebar size. The cell phone stands have a rotation that allows you to free your hands from time to time. The bike phone holder is compatible with any smart-phone with a screen size between 2.5 and 3.8 inches. The padding tape reduces the amount of vibration during the ride. Don't damage your bike or motorcycle handlebars by scratching your smart-phone. There is no risk of damage, sliding, or moving on your ride.

Brand: Ralos

👤It has been good for a few rides. The mount doesn't shake like my last one. I would rather have my phone secured and not have to use a quick release to tighten the screw, as it takes 5 seconds instead of 1 with a quick release. It protects my large phone even with the little pads on the contact points.

👤This is the third replacement I have gotten because the product I get is either already used or broken. The one I got looked new but it didn't have any cushion pads or anything for the support and the outer box looked like it was used by someone else. Completely dissatisfied with the product. Not worth anything at all. I guess it's very cheap.

👤The phone can be secured without having to remove the phone from its case, because the large clamps are enough to fit around a regular phone case. The only issue I have with it is the positioning of the upper clamps. When you tighten the clamps on your phone, the buttons on it will line up with where the clams are. Either you have to sacrifice how tightly it is secured or one of your buttons is pressed constantly.

👤A very well made unit. I have an "Incipio iPhone 7 Case Hard Shell dual layer dualpro case for iPhone 7-Black/Black" that fits perfectly in the mount. There are rubber pads. The case design and cushiony made it impossible for me to install rubber pads into the mount.

👤It works well for holding my phone while riding. I wish the grip area was bigger so I could leave the case on if it fell off.

👤The mount holds my phone well. The materials are great, but you have to put sticky rubber bumpers in the clamps to cushion your phone. It's hard to get those things to stick for a long time and you'll have to go back in a few weeks to find out they're gone, which is what I did.

👤I have been using this bike mount for about 80 miles on my bike. And it is very solid! It is very well built and does not move or drop your phone. You can control the tension with a knob. You can not beat the price. Would buy again.

👤I bought 3 of them a year ago. Assembly was easy. I have the largest phone. The product has an issue with the head. The material is thin and causes a break on them. Unless you like welding, there's no way to fix the metal. I liked the way it worked on my bikes.

3. Motorcycle Universal Anti Shake Compatible Smartphone

Motorcycle Universal Anti Shake Compatible Smartphone

The bike mount on the Super Stable is military grade. The Andobil bike phone mount has a non-slip/scratch-resistant silicone cushion and flexible clamping arms, so it will not fall off even in sudden braking or steep roads. You can come with double shock-absorbing Silicone bands, which can be stretched up to 4 times to hold your phone, not only protect your phone in the craziest adventure. The ball joint gives you the ideal viewing angle and allows you to switch between portrait and landscape view in a matter of seconds. The open-face design allows you to fully experience the joy of riding or sporting, because it has full-screen access and different lengths' clamps avoid pressing the volume key. The universal phone holder for bicycle has a clip that fits most phones. It's compatible with the iPhone 12. Mini/11 Pro/11 Pro Max/SE/Xs Max/XR/Xs Plus/6 Plus/7 Plus Plus/7/7 plus/6 plus/6 plus/4 There are more than one, including the following: the S20/S21/Note20/A51/S8/S8 Plus/S7/S10/S10 Plus/S9 Plus/Note 8, the S9 Plus/Note 8, the S10 Plus/S9 Plus It is easy to install the bike cell phone holder on the handlebars. The phone holder for bike handlebars has a scratch-free rubber pad and can be adjusted to fit any bike. Andobil puts the customer's experience in the first and insists on making high-quality products. Please let them know if you have any usage problems or product suggestions. They will improve their products. There is a one-year hassle-free service. If you have a problem with andobil's phone bike holder, please mail them and they'll get to you in 12 hours. package box, nut, phone mount base, and user manual.

Brand: Andobil

👤During the time of COVID-19, I bought a bike so I could get some exercise. I was more than happy to review this mount when I was approached by this company. There is a The mount is made of rubber. It has an additional rubber phone holder to hold larger phones. Up to 7 in length and 4.5 in width. The device is very flexible. I can change my phone's orientation with ease. There is a The phone is secured to the bike. The amount of slip is limited by groves of rubber teeth. My daughter attached it to the baby stroller. She won't give it back.

👤The skyforce95 is very easy to install and mount, and it is secure and easy to change.

👤The Andobil holder broke off when I was riding on a bumpy road at 20 miles per hour. I contacted Andobil and asked if I could get a replacement. It took me a long time to use it because I was lucky to have my phone undamaged. I have been using the new unit for about 3 months and it has been the same thing. The Andobil piece holding my phone went flying and landed in the middle of a busy road when the unit broke in half. I was able to stop cars from riding over the phone after pivoting my bike. The phone was saved from damage by the protective case. It might be a freak event. Two

👤Delivery was on time. The packaging looks good. Assembly and instructions were easy to follow. The product is well placed on the handlebars. I haven't had any issues with the connections or the straps, it's plastic I think it is a good product. It is brand new. I would feel comfortable using this on a road or mountain bike. The bike can be moved to different bikes depending on my needs, and I like that it's quick. I love their proactive and responsive customer service. I would be very comfortable buying this again and working with this company.

👤I bought this for my new phone less than a month ago. It was easy to install. I only used it once, when I received an email from Andobil that another customer had complained about their mount breaking. Even though I had no problem with my original order, Andobil wanted to send me a new mount. The new mount is easy to install and I received it very quickly. It is easy to use. I highly recommend. Customer service is top notch and the product is high quality.

👤The mount works well for me. The rubber band holds my G5 in place. The side brackets are sturdy and l-shaped to provide additional safety. The handlebar is large, easy to tighten, and the soft rubber pads are attached to the brackets so it can't move, which was a problem with my old mount.

👤I've used a number of phone holders for my motorcycle, and this one is the best. It is low profile and blends in nicely with my ape hangers. It is easy to adjust the phone.

4. Waterproof Motorcycle Aluminum Handlebar Touch Screen

Waterproof Motorcycle Aluminum Handlebar Touch Screen

The IP66 is waterproof. The motorcycle phone mount is waterproof and can protect your phone in the rain. The waterproof cap on the motorcycle phone holder makes it very convenient to charge or plug in the earphones. Touch Screen The mount on the bike allows you to fully access the phone screen without removing the phone. You can adjust the angle of the bike phone holder with a rotation. It is safe and stable. The bottom panel of the bicycle phone mount is made of shockproof silicone and has a resilient base to prevent your phone from shaking. The three-sided locking design ensures that your phone is securely fixed on the motorcycle cell phone mount even on a bumpy road. There is no camera blocking. The back of the bike cell phone holder has a transparent film window that you can use to record your travel moments. It is widely compatible. The phone holder is suitable for installation on the handlebars of bikes, mountain bikes, scooters and other vehicles. L size is compatible with cellphones. The case can hold mobile phones less than 10mm in thickness.

Brand: Kewig

👤They have been through the mud and storms and keep my phone dry.

👤My phone was just a fewmm long. My fault was that I didn't measure the phone. There is a The case and mount are strong. It's a perfect case for a motorcycle or bicycle.

👤It's easy to put on and seals well. It was a little difficult to open.

5. GUB Motorcycle Aluminum Rotation Adjustable

GUB Motorcycle Aluminum Rotation Adjustable

You can adjust the width from 50mm to 100mm to fit a cell phone. Can hold up to 7 inch phones. The Sponge protects your cell phone and the metal phone mount will hold your phone tightly on the bicycle. The Bike Phone Mount does not obscure the screen, it is perfect for large screen phones. All screen phones include the iPhone 11/iPhone 11 Pro MAX/Xr/xs, the Note10 Note9 8 7 full screen, and the S20 S10+. The viewing angle can be changed at will. The bike phone holder can be installed on the handlebars. Can be used on motorcycles, mopeds, e-bike,Folding bike,scooter, etc.

Brand: Gub

👤This product is easy to use and set up. I have it on my motorcycle. I will get another one for my quad. My phone is attached and detached in two seconds. The only problem with this item is the security feature, do you need a specialty Allen wrench to attach it to your handlebars? You can't use a standard Allen wrench to install it, you need to use their specialty Allen wrench and the one they sent me didn't work so I needed to use my grinder and drill bit to make it work I have to make sure I don't lose the Allen wrench because I may need to make adjustments once in a while. Nobody will attempt to steal this off my bike. I am sure other people have the same problem that I did. The product is perfect.

👤Thankfully my plastic phone holder failed. I decided that my next mount should be metal. I found this mount and it looks great. The mounting hardware is rock solid and was clearly designed with longevity and quality in mind. The mount lacks the rough edges and poor alignment of many items sold on Amazon. The mount appears to be designed by an engineer. The phone body is tightened with a screw mount. I secured the Note 9 while it was still in its plastic case. It was large enough to fit in the room to spare. There is a The mount comes with one side that fits all and the other side that doesn't fit around a larger tube such as the stem tube or wider handlebars. There are mounts that can accommodate a wider tube. It would be a great improvement if this mount came with one of them. There is a The phone cannot be tilted back or forward. It is locked in place and in orientation once it is tight. When the screen is throwing glare into your eyes, you can't adjust the tilt to diffuse the light. This isn't a big deal, and I would rather have a very secure phone mount. There is a I give this mount 4 stars. It would be a 5/5 with a more versatile mounting hardware.

👤I bought this one because I wanted something that wouldn't snap in half at the first wreck. This is verydurable. There are negatives to the fact that the handlebars have a round connection. I don't like the idea of keeping a Unicorn tool in my bag if it gets lost, and the Allen wrench is a special one. My phone is in the carrier and it turns the volume down while I'm in it. There is a If you have an iPhone, round handle bars, and do not mind keeping a unique tool on you for adjustments, this is a good item.

👤I bought 3 of them, one is on my motorcycle, the other is my phone, and the last one was solid and secure on my first ride. I didn't worry about my phone when I took the expressway. Highly recommend.

6. Bike Motorcycle Phone Mount Motorbike

Bike Motorcycle Phone Mount Motorbike

Out and out universal allows you to mount any phone to any bike or motorcycle with tubular handlebars. There are no tools required for installation. The extra secure clip has silicone belts that grip the phone firmly. The phone will not fall if it is made the most extreme ride. AJUSTABLE GRIP. You can adjust your phone to any position that suits you, and enjoy the comfort of your ride. Full phone access includes screen, buttons and mic jack. You don't need to unmount your phone. You should keep your hands on the handlebars. To safeness is 100. If you don't like your new bike phone mount, just contact them and they will make it right.

Brand: Accessories

👤Quality purchase would purchase again or recommend it to anyone after being tested on the handlebars of my motorcycle at 90 miles per hour. It was on time. The bike phone and mount survived the wreck. I ordered another one because I forgot to remove the mount before the bike was totaled. Someone pulled out in front of me and totaled my motorcycle. The phone mount was left with the bike when the insurance company claimed it. The first thing I bought for my new bike was this. I bought 2 because I still stand by my original review.

👤It was easy to install and comes with an extra set of corner grips. I haven't ridden it yet to see how it holds up. I will give it five stars if it does. The product has passed the test and I have given it five stars. The bike path is fairly smooth, but there are a few areas with serious bumps due to blunt edge covers over electrical hubs. When you pass over them, they are large enough to get you off your seat. I have been on a few rides and there has been no movement. It stays nice and secure when my phone is strapped in. The main reason I chose this product was that I have access to all the buttons on my phone while it is in the unit.

👤I attached my phone mount to my mountain bike and went around the neighborhood streets, sidewalks, and trails. The trails ranged from packed dirt to rocks and gravel, and my phone stayed secure the entire time. There are brackets on the sides of the phone that would be secure enough for riding on the street. I attached the bands to all corners and my phone wouldn't budge on the rocky trails. All the bands were on when I got home. There is a The handlebar clip is easy to install. The phone can be used to portrait or landscape. It takes some gentle force to click to each position which I appreciate because it adds to the security of the phone. The phone doesn't move forward or back when you mount it, so you just put it in the position you want. One of the main criteria I wanted was that the rubber straps did not block the cameras. Absolutely worth the price and will definitely recommend to friends and family.

👤I've purchased a CAW phone holder before. The plastic adjustment nut on the back side split apart after a year or so. To return late. I bought another CAW because I liked what I had. I use it on my mountain bike, Big Dog motorcycle, tripod and a selfie stick. I think this is a better design and more durab. It looks like CAW has added this design to their product line.

👤This is a great mount. This is the one to get if you want a phone mount for your motorcycle. Two mechanisms are used to secure the phone. I forgot to put the bands on the corners of the phone and the spring vice on the sides held the phone with out issue, and I was going 70 mph down the freeway. I think that the reliability of this mount was proved by the fact that the phone did not move. If you are in the market for a phone mount, I encourage you to buy this mount. The Bands are recommended by the manufacturer for maximum reliability and will help secure on bumps.

7. Phone Holder Mount Bike Handlebar

Phone Holder Mount Bike Handlebar

The right size is disposable hand napkin, 12 x 17 when unfolded and 8 x 4 when folded. Sturdy and safe. The motorcycle and bike phone holder has a special shape. It keeps your cell phone out of the way on a bumpy road. The protection is shockproof. Silicone pads keep your phone safe from scratches and vibration. The motorcycle phone mount holds your phone. Wide Compatibility Universal bike cell phone holder with thickness up to 15mm, like Phone 13 1 2 Pro Max Mini Xs XR X 8 Cell phones include the Plus 7 6s, the S10e S9 S8, the Note 9, and the other phones. The cellphone can be adjusted to a horizontal or vertical screen. It's convenient to answer the phone, play music, and use the gps. Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm). Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm).

Brand: Lamicall

👤I don't know how long this will hold up. The mount lost its hold on the angle setting after I lightly bumped it. I was retightened. It feels like a week. I'm afraid it won't be able to take the damage from the bike. We will see. There is an update... I screwed the plastic adjustment down tight after using some handlebar grip glue on the ball mount. It seems to stay where I put it. The rubber shims on the handlebars do not seem to have an issue with staying put. Don't make this mount hard, it will work now. The only thing holding it is a plastic shaft with a plastic ball that goes into the back of the phone mount. There is an update... The company contacted me after reading about my issues with the product. They have great customer service. The new version of the holder is much stronger than the original one. They took care of me.

👤I knew I was going to love it when I opened the box. Feels solid, looks sleek, easy to assemble and install, simple to insert phone, padding everywhere your phone makes contact to better hold, prevent damage, and absorb shock. The phone is locked when the lock switch is on the rear. Your phone is held securely even without a lock. When riding on bumpy surfaces, the holder pivots in all directions, but not so easily. The rear camera on the phone is partially obscured by a bar in the back, but a tiny zoom and the obstruction is gone. If you want to record your rides, this is great. If you want to use that option, the front facing camera is not obstruction. I have a slim case on my phone and it fit in the holder. I'm glad I took the risk with the item that didn't have many reviews on Amazon. Lamicall is a great product.

👤I've been looking for this product. When I mountain bike a lot, I end up stopping to bring my phone out of my pocket because I get lost. I wanted a phone that would hold up well on the trail. It works better than I thought. The video is attached. My phone is a small one with a large screen. I didn't lock it. It held it as well. It had rubber and Silicone things to adjust to the handlebars. The stem is a bit thicker than my handlebars. I removed 3 of them. It works well.

👤The first item I bought was never delivered. I received my second order and it works great. I have an iPhone 11 max pro with a pink defender case. A good protective case was necessary for me because I walked on concrete as a high school teacher. My phone is in my case and any way the gadget can hold it. It takes a little bit of wiggling to get it inside the holder. There is no sliding out. I like the fact that you can change the orientation of your phone. Great item.

8. OMOTON Bike Phone Mount Holder

OMOTON Bike Phone Mount Holder

The 4 stretchablestainless steel clamp arms with upgraded thickened silicone pads can grip your phone tightly and absorb vibration, just like eagles grasping things with their claws. It's flexible and durable enough to protect your phone from scratches and bumps on the road. The phone and handlebar are compatible. Most bike handlebars have a phone mount on them. The phone holder can be used with a lot of different types of bikes. It's compatible with phones with a thickness of less than 15mm. One-hand operation. It is convenient to have a phone with you on your bike. Pull down the bottom of the phone and install it in one second. The lock button on the side makes sure that the 4 corner arms hold your phone in place. The degree rotation is. The cell phone holder can be adjusted to any angle you want. The knob on the side of the phone can be adjusted to make sure the phone stays in place on the road. One-Minute Installation. It is easy to install the bike motocycle phone mount. You can adjust the number of silicone pads on the base to fit the actual diameter of the handlebar by attaching 3 2mm silicone pads in the package. This will keep the bike phone holder in place.

Brand: Omoton

👤The OB defender case fits a note. It's sturdy and fits on the bike without much movement when tightened on the handlebars and the ball mount. It takes some work to get the phone and case to fit, but once the mount is attached to the bike, it's much easier. I'm glad I was able to find one that fits my phone and case.

👤The holder was for my phone. I returned it for a couple reasons. There is a I couldn't get my handle bars to fit securely because they are not round. I didn't think it would fall off. There is a The holder rattled very loudly. The handle bars are not round so it might be because it was not secured. I was worried that I would lose my phone. There is a Two stars were due to my issues. It could work with a different phone. It was nice to try it because the return was seamless.

👤It is easy to install and use. There is a lock feature. It feels a little flimsy and comes with a few rubber shims. Don't get rid of them. I used one for a 1” bar, but had to add another because it would spin downward and I couldn't read the gps. It's a pretty good little holder. I had mine go about 80 mph. After I added the second rubber mount shim, it didn't budge.

👤My husband is going on a 300-mile cycling trip. It was easy to mount and adjust, and was a good fit for his phone. He had good access to the screen and buttons and was not worried about the phone falling out or the holder falling off. The quality and value of our OMOTON Kindle covers has impressed us, and this product is another excellent one from them.

👤The phone mount works well. The locking feature is something I like. The mount is not moving because of the vibration. It has a screw in the back to keep the phone brackets in place. The last phone mount I had was a problem with the side buttons on my phone, so I like that it does not. It should fit any phone, even if it's an Iphone, because it expands up and out when placed in the mount. Great product.

👤I am happy with this so far. I attach my StreetStrider to the arm bar so I can see how fast I am going, but I couldn't put it on the middle bar because I have a StreetStrider.

👤It works like it should. It works like it should, since it was mounted on my road glide and has over 1000 miles on it. I have an S10+ with a Otter Box defender on it and it works.

👤The phone holder was easy to use and install. The phone is locked in the holder so it can't be moved. I can't testify for mountain bikers. This product is what the doctor ordered.

👤I used it to hold my phone. It worked well. I went over rough terrain and although it did vibrate a little, it was expected. The phone was in a case and it fit well. I hope the standard stays up.

9. IMESTOU Waterproof Motorcycle Handlebar Cellphones

IMESTOU Waterproof Motorcycle Handlebar Cellphones

The wireless charger is in the design of the Quick Charge 2. Fast charging for most 3.5- to 6-inch cellphones is possible with the built-in upgraded integrated big circuit and 8mm wireless sensor. It is impossible to shake off the motorcycle phone mount even on rocky roads with the 4-corner entirely wrapping design. 100% safe and reliable! When the telescopic modules on two sides are pushed in, the motorbike phone holder automatically releases; the moment your phone is placed on the bracket, the sensor point pressed by it in the center, phone. There are two ways to install the motorcycle handlebars and the rear-view mirror base, with a waterproof design and a switch that will allow you to ride in the rain. It's possible to charge the phone with wireless charging, but it's also possible to charge the phone with a phone with a phone with a phone with a phone with a phone with a phone with a phone with a phone with a phone with a phone with a phone with a phone There is a wireless charging function. Quick charging for phones using the Quick Charge Protocol. eg. The normal charging speed for all mobile phones.

Brand: Imestou

👤I have a 2020 Harley- Davidson Road Glide limited and it would be nice to have a phone mount for my handlebars. The item was installed the next day. I'm pretty happy with it, even though I only had it installed for two days. You can install this yourself if you're handy around a motorcycle. The wires need to be connected to the battery terminals. It's easy. The wire is the hardest part. If you don't know what you're doing, you can take it to someone who knows what they're doing and they should be able to install it in an hour or so on most motorcycles. There is a The item seems well built. I like the function and the way it works, which is very easy to use. You can remove the phone by pressing the two side buttons and pushing the phone against the back plate. The phone mount on my bike was easy to adjust, but it was still sturdy throughout my ride. I'm happy. Even though my phone has a thin clear plastic case, it still charges via wireless charging. Even though this is new, I like it. I'm not sure how long it will last and function given that it's Chinese made, but I've seen Chinese made products that are poor quality or lack quality control, so I'm skeptical. We'll see. It was easy to install the mount. I have never taken my motorcycle apart before. A 15 minute video on the internet showed me how to remove the seat and gas tank for proper installation. Installation took 90 minutes because I didn't know what I was doing. I had to make another trip to the hardware store to buy some tools to remove items from the bike to get the wires to the battery. The phone charger has a wire that is connected to it, so it is nothing fancy. The wire should be routed to the battery so that it isn't in the way. There are a number of little mounting accessories inside the box. I removed everything from the motorcycle and it fit. I mounted mine to the right handlebar because I'm right handed. There is a What I don't like is con's. Although I like the product, there are some things that I didn't like or weren't pleased with that kept me from giving this 5 stars. There were no instructions for the mount. Nothing at all. Not even a piece of paper. You get a brown box with parts inside. I'll hang onto the box for a while in case the parts are needed. There are two more The wire that was included and pre-attached to the charge is too short to hide on a Harley-Davidson motorcycle. I couldn't route the wire behind the handle bars like the other wires are routed because of the result. I have exposed wire hanging there. I'll need at least 4 or 5 zip ties by the time I figure out how to hide the wire, since the kit includes two small black zip ties. I will have to go to the hardware store again to get more black zip ties. There are 3 more The button on the back of the charger is very small and covered in a clear cover to keep it dry. It's a 3-way button, so you have Wireless Charging On, Off, and ausb On. You can't have Wireless charging on at the same time. It was a struggle to get the switch to one of the charging positions because I have big hands and big fingers. I couldn't get it to click into position with the cover. I initially thought the charger was malfunctioning, but I used a tool to get the switch to stay in the wireless charging position to verify that it was working. Unless the bike stays in storage for a while, there won't be any turning it off. I don't think it would be possible to work the little switch with motorcycle gloves on. I hope it doesn't drain my battery.

10. KEWIG Bike Phone Mount Motorcycle

KEWIG Bike Phone Mount Motorcycle

One-handed operation. The bike phone mount has a mechanical tight locking design, which makes it safe to attach your cell phone to the bike handlebars. The motorcycle phone mount is equipped with a quick release switch, which will allow you to take out your phone with one hand. Shockproof Protection Silicone pads are built into the motorcycle phone mount to keep your phone safe. The phone holder and phone camera are non-contact. The camera should not be squeezed or scratched while riding. Sturdy and safe. The bike phone holder has a special shape that can be wrapped around your phone. The telescopic arms and base are super sturdy. The bike cell phone holder is perfect for holding your phone. Easy installation. This bike phone holder has an upgraded handlebar mount that is easier to install or remove. The extra rubber ring pads make your phone fit better with the handlebar. The fit is for the diameter of the handlebars. Wide Compatibility The motorcycle phone holder is compatible with a 4'' - 7'' phone. This bike phone mount handlebar base is 22mm in diameter. Installation on various types of bikes, motorcycles, stroller, shopping cart, electric scooter, indoor bike is suitable.

Brand: Kewig

👤I've been using it on my motorcycle for 4 months and it works great. It is easy to pop the phone in and out and lock it up until you release it. It works well on bumpy roads. I had the handlebar mount wrong and it wouldn't tighten well until I fixed it, so be sure to install pieces just like the picture. Don't forget the one-time width screw adjustment for your phone. That makes it a really nice fit. It uses a spring mechanism to close, but so far it's been great. The spring pulls the arms in to lock, and it doesn't hold it in place.

👤Put it on my electric glide classic. The road was not in the best shape. Stay put. The entire trip was over 400 miles. I was in Missouri riding two-lane Blacktop. A goat step out into my path but not the second bike. Both bikes were busted up. The phone was still in its case. My phone is note 9. It's one of the larger ones. Thanks for the product. I saved my phone.

👤I have a GIVI smart bar on my BMW R 1200RT. The included attachment to mount on different size tubes is something I love. It's easy to get the phone out of the holder. The device will be as good as construction.

👤The negatives are that I have a big case and a pop sockets for my phone. I don't need to use a pop sockets when it's in the mount, but I have to take the design part of the pop sockets off to get it to press the button and close. The piece of pop sockets that is still attached to my phone has 888-405-7720 Unless you have a pop sockets, it is not an issue. The front camera is shaky because of the vibration. I can't take pictures with my front camera because it won't focus anymore. The grom is known for being very buzzy and I don't know if this is the mounts fault or my bikes fault. There is a It fits my phone. My phone firm is in place. It is easy to use and doesn't require any tools to adjust. It is easy to change the angle of my phone on the mount. I leave my bike in the sun a lot here in Arizona and the plastic is holding up well. There is a Hope this helps you make a decision. It is definitely worth it. You can always upgrade in the future. If you need to save for a better one, it will last a long time.

👤I bought this for my scooter. It looks nice, but big. It is easy to install and adjust. 100% fits my phone. I am happy.

👤My son and I walk around the neighborhood on a mount. It has a nice push button action to snap the phone in place. He loves being able to play multiple games at the same time and it gets him outside of the house, which is a win win for all. I haven't tested on a mountain bike that is more rugged but can't see it being a problem. Overall happy with the purchase.

11. BRCOVAN Motorcycle One Handed Operation Handlebar

BRCOVAN Motorcycle One Handed Operation Handlebar

One-handed operation. The bike phone mount has a lock and a switch. Put in or take out your phone in a single second. The angle can be adjusted according to your needs. A special shape design of this motorcycle phone mount can wrap four corners of your phone tightly. The telescopic arms and aluminum alloy mounting base are super sturdy. The motorcycle phone holder is perfect for holding your phone. Easy installation. The bike phone holder can be installed on the mirror frame. The rubber ring inserts provide a snug fit and protect the mounting surface. You can either add or remove the rubber ring pad. The bike cell phone holder can be installed on the motorcycle rear-view mirror frame. The bicycle phone holder has built-in pads that keep your phone from being scratched. The design of the phone bike mount and phone camera is non-contact. The camera should not be squeezed or scratched while riding. Wide Compatibility The bike phone mount is compatible with 4 - 6.9 inches cellphones. The phone holder is mounted on the handlebars with a diameter of 22mm-32mm. It's suitable for installation on bikes, motorcycles, mountain bikes, scooters and other vehicles.

Brand: Brcovan

👤The phone was held tightly. I thought this would be the perfect phone mount for my bike. The phone mount would come apart from the handlebar mount, and the phone would fly along with the clamps that work so well. After trying this many times, I decided it wouldn't work for me. I would be sure it was clipped tightly. If the clip on the mount was improved, I would choose this. I returned it.

👤The mount barely moved the whole time I rode it. I was worried that the phone would tilt down while I was on it, but it held up. I was a bit worried that it wouldn't hold my phone securely, but my phone was not going anywhere. I have a spigen case that fits well. The phone would pop out of the case before the mount came out. There is a I can remove most of the mount when I don't need my phone for directions, leaving just the mount ball, which is very low profile. When I need it, I can put the mount back on.

👤It is simple, sturdy and reliable. I use it for my motorcycle. I love it.

👤This product is amazing. It fits in the otter box defender case. It works perfectly and is built to last. The quality is good for the money. It should cost 2x what they are selling it for.

👤I've tried some fancy phone holders that are more of a hassle than a solution. A friend of mine had a phone holder. I had to try it. It is a simple and well designed product. It opens, you push it onto the button, and it closes around your phone. This is the best phone holder I have ever used, because I drive an ebike at high speeds on bumpy country roads. Two thumbs up.

👤It was easy to install. I expected it to be tight and that's what it was.

👤I was surprised at how easy it was to install. Works just as well as mounts.


What is the best product for bicycle phone mount charger?

Bicycle phone mount charger products from Bone. In this article about bicycle phone mount charger you can see why people choose the product. Ralos and Andobil are also good brands to look for when you are finding bicycle phone mount charger.

What are the best brands for bicycle phone mount charger?

Bone, Ralos and Andobil are some of the best brands that chosen by people for bicycle phone mount charger. Find the detail in this article. Kewig, Gub and Accessories are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to