The Andobil bike phone mount has anti-slip rubber pads, a stable support shelf, and an improved rubber belt to give you a secure grip on your cellphone. The smart phone will stay in the bike phone holder and not distract you from cycling. In extremely harsh environments, Andobil bicycle phone mount could work well. Make you a true warrior by helping you conquer all the terrain. The bike phone holder with ball joint allows you to adjust the angle while riding. The phone can be oriented to portrait, landscape, or any angle in between, which means you have a perfect riding perspective. If your phone camera is in the upper left or right corner, you can adjust the angle and record a video to record the whole process of riding. Installation is easy and quick without tools. The bicycle phone holder is very easy to attach or detach from the handlebars. Attach the nut to the handlebars. Any handlebars between 15mm and 45mm in diameter can be fitted with the clamp's size being adjusted. Such as bicycle, e-bike, motorcycle, scooter, treadmill, indoor bike and stroller. The upgrade clamp 3.0 features soft rubber pads that are non-slip, firm, and non-scratch, which can be fastened to the handlebars firmly without sliding. The bike phone mount is made of elastic rubber strap and can protect your phone from scratches, and absorb all vibration, so that you can enjoy the cycling process. The first foot of phone holders for bike was designed by Andobil. The cell phone power or volume button can be squeezed by the arm. It's compatible with all of the phones, such as the iPhone 13, Pro 13, Pro 13, Pro 13, Pro 13, Pro 11, Pro 11, Pro 11, Pro Max, and the Note 10. Orobil insists on making high-quality products and always puts the customer's experience in the first place. Please tell them if you have any usage problems or product suggestions. They will improve their products at the first time. If you have a problem with andobil's phone holder for bike, please mail them and they'll get to you in 6 hours.
👤Over the years, I have had a number of cell phone holders. The majority of them fell apart after a few months of use. I ride my bike almost every day in Florida, so I put it in and take it out. The holder went on my bar and screwed it down very tightly. My phone doesn't shake when you ride it. Many holders had an issue with this. The phone is held in place by squeezing the sides of the holder. I still use the straps over the top comers of the phone just in case, but I've ridden without them as well and the phone held firm. I just got a new phone and it fits just as well as the old one. If you are looking for a good holder that will last a long time, this is the one for you.
👤This is the most secure bike attachment I have ever owned. Very impressive. There are different size bands that are rapped around the phone. It has a shelf on the bottom to keep the phone from falling out. I put on all four corners because the bands are only needed at the top. Attach the bike with a simple twist of the knob. It fits my phone. I was worried it wouldn't fit, but it can fit a larger phone. I am very happy with this purchase.
👤This mount is amazing. I have an Apple product that fits perfectly. I put it on my M2S. All Terrain e-bike. The jaws are strong. I was impressed with the construction of the mount. He was very strong. Also, great packaging. It's well worth the price.
👤I don't write bad reviews. I will make an exception for this. I used the phone mount all the time. A month ago, I was riding a bike on a trail near my house when my phone and mount flew off my bike and hit the ground. The stem was broken. My phone was working. It damaged my case. They sent me a replacement mount after I reached out. My phone flew off the handlebars and hit the ground after the stem broke, just like it did yesterday, and I had to replace my screen protectors. The mount broke in the same spot. I don't recommend this phone mount as it can cause serious damage if your phone falls off your bike. It is completely ridiculous. The company reached out to me and apologized. They said that they sent me a new design to try and reinforce the trouble area. I will update this review in a few months and let you know how it goes with the new one. They show good customer service and I assign extra stars for that.
👤This was a piece of cake that I had to install. I have an Iphone 11 and it fits in the holder. It is much more secure when the rubber things hold each corner. Have used it twice. I rode my bike 44 miles round trip and rode 14 miles on the beach after a 17 mile trail ride near my home. The handlebars did not move. There is a It has a ball that can change the angle. Very happy with the purchase.
The sensitive touch screen makes it easy to access your phone without opening the bag. The bicycle package can't implement the fingerprint unlock function. Please use a password or other method to get your phone unlocked. Sturdy and safe. The motorcycle and bike phone holder has a special shape. It keeps your cell phone out of the way on a bumpy road. The protection is shockproof. Silicone pads keep your phone safe from scratches and vibration. The motorcycle phone mount holds your phone. Wide Compatibility Universal bike cell phone holder with thickness up to 15mm, like Phone 13 1 2 Pro Max Mini Xs XR X 8 Cell phones include the Plus 7 6s, the S10e S9 S8, the Note 9, and the other phones. The cellphone can be adjusted to a horizontal or vertical screen. It's convenient to answer the phone, play music, and use the gps. Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm). Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm).
👤I don't know how long this will hold up. The mount lost its hold on the angle setting after I lightly bumped it. I was retightened. It feels like a week. I'm afraid it won't be able to take the damage from the bike. We will see. There is an update... I screwed the plastic adjustment down tight after using some handlebar grip glue on the ball mount. It seems to stay where I put it. The rubber shims on the handlebars do not seem to have an issue with staying put. Don't make this mount hard, it will work now. The only thing holding it is a plastic shaft with a plastic ball that goes into the back of the phone mount. There is an update... The company contacted me after reading about my issues with the product. They have great customer service. The new version of the holder is much stronger than the original one. They took care of me.
👤I knew I was going to love it when I opened the box. Feels solid, looks sleek, easy to assemble and install, simple to insert phone, padding everywhere your phone makes contact to better hold, prevent damage, and absorb shock. The phone is locked when the lock switch is on the rear. Your phone is held securely even without a lock. When riding on bumpy surfaces, the holder pivots in all directions, but not so easily. The rear camera on the phone is partially obscured by a bar in the back, but a tiny zoom and the obstruction is gone. If you want to record your rides, this is great. If you want to use that option, the front facing camera is not obstruction. I have a slim case on my phone and it fit in the holder. I'm glad I took the risk with the item that didn't have many reviews on Amazon. Lamicall is a great product.
👤I've been looking for this product. When I mountain bike a lot, I end up stopping to bring my phone out of my pocket because I get lost. I wanted a phone that would hold up well on the trail. It works better than I thought. The video is attached. My phone is a small one with a large screen. I didn't lock it. It held it as well. It had rubber and Silicone things to adjust to the handlebars. The stem is a bit thicker than my handlebars. I removed 3 of them. It works well.
👤The first item I bought was never delivered. I received my second order and it works great. I have an iPhone 11 max pro with a pink defender case. A good protective case was necessary for me because I walked on concrete as a high school teacher. My phone is in my case and any way the gadget can hold it. It takes a little bit of wiggling to get it inside the holder. There is no sliding out. I like the fact that you can change the orientation of your phone. Great item.
You can adjust the width from 50mm to 100mm to fit a cell phone. Can hold up to 7 inch phones. The Sponge protects your cell phone and the metal phone mount will hold your phone tightly on the bicycle. The Bike Phone Mount does not obscure the screen, it is perfect for large screen phones. All screen phones include the iPhone 11/iPhone 11 Pro MAX/Xr/xs, the Note10 Note9 8 7 full screen, and the S20 S10+. The viewing angle can be changed at will. The bike phone holder can be installed on the handlebars. Can be used on motorcycles, mopeds, e-bike,Folding bike,scooter, etc.
👤This product is easy to use and set up. I have it on my motorcycle. I will get another one for my quad. My phone is attached and detached in two seconds. The only problem with this item is the security feature, do you need a specialty Allen wrench to attach it to your handlebars? You can't use a standard Allen wrench to install it, you need to use their specialty Allen wrench and the one they sent me didn't work so I needed to use my grinder and drill bit to make it work I have to make sure I don't lose the Allen wrench because I may need to make adjustments once in a while. Nobody will attempt to steal this off my bike. I am sure other people have the same problem that I did. The product is perfect.
👤Thankfully my plastic phone holder failed. I decided that my next mount should be metal. I found this mount and it looks great. The mounting hardware is rock solid and was clearly designed with longevity and quality in mind. The mount lacks the rough edges and poor alignment of many items sold on Amazon. The mount appears to be designed by an engineer. The phone body is tightened with a screw mount. I secured the Note 9 while it was still in its plastic case. It was large enough to fit in the room to spare. There is a The mount comes with one side that fits all and the other side that doesn't fit around a larger tube such as the stem tube or wider handlebars. There are mounts that can accommodate a wider tube. It would be a great improvement if this mount came with one of them. There is a The phone cannot be tilted back or forward. It is locked in place and in orientation once it is tight. When the screen is throwing glare into your eyes, you can't adjust the tilt to diffuse the light. This isn't a big deal, and I would rather have a very secure phone mount. There is a I give this mount 4 stars. It would be a 5/5 with a more versatile mounting hardware.
👤I bought this one because I wanted something that wouldn't snap in half at the first wreck. This is verydurable. There are negatives to the fact that the handlebars have a round connection. I don't like the idea of keeping a Unicorn tool in my bag if it gets lost, and the Allen wrench is a special one. My phone is in the carrier and it turns the volume down while I'm in it. There is a If you have an iPhone, round handle bars, and do not mind keeping a unique tool on you for adjustments, this is a good item.
👤I bought 3 of them, one is on my motorcycle, the other is my phone, and the last one was solid and secure on my first ride. I didn't worry about my phone when I took the expressway. Highly recommend.
Nulaxy h18 bike phone holder adopts one-step operation which is advanced for the super- easy installation and no additional locking procedure is needed. You are ready to go if you push your phone in. It fits for any handlebars of different types of bike, motorcycle, shopping cart, indoor treadmill and spin bike. Nulaxy bike phone mount is compatible with all phones and phone cases. It can hold phones up to 20mm thick, and is compatible with phones with a screen size of up to 6.8 inches. The anti-slides silicone of the motorcycle phone mount can hold your phone firmly from four corners. Silicone protects your phone from scratches even on rough roads. The scenery of the beautiful nature journey is what you should focus on. The design is called the "Rotatable Design". The mount for the mountain and road bike phones is a 180 degree rotation. Pick up the phone, answer the video, play music, and use the gps while riding. The spring is variable and telescopic. The cellphone can be adjusted to a horizontal or vertical screen. The motorcycle phone mount has tension springs. The top spring will stretch to a length that fits your phone if you place it on top of it.
👤I have lowered my review from 4-stars to 1-stars because I can't give it 0-stars. I had to adjust the angle on my bike ride because of the sun glare. I didn't experience satisfaction despite the satisfaction guarantee. I was only offered a replacement after I filed the claim. The company ignored attempts to resolve the problem.
👤I like the fact that I can take my phone with me. The rubber corner holders that my previous phone holder used completely unobscured the screen. I don't like one thing about it. There is a small amount of wiggle where the post is attached to the clamp. I didn't get it tight so it's not wiggling.
👤I am very pleased with this phone holder. It holds my phone very securely. It took a bit of effort to put it on the handle bar. Since my handle bar is a smaller diameter, two pieces of rubber, included with the phone holder, were needed to fit the phone holder to the handle bar. I had trouble securing it to the handle bar because of the two pieces of rubber. Glue the two pieces together to solve the problem.
👤The Nulaxy H18 Bike Phone Mount is a pleasure to use. I put it on my bike so that I could have my phone handy for receiving calls, watching training videos, etc., and I also put it on my indoor trainer so that I could have my phone handy for watching training videos, etc. I mounted it on our treadmill for the same reason. The spring loaded phone holder is very strong. I can't wait to use it outdoors when the weather gets warmer, where I don't have to look in my back pocket to see who is calling me. I will have to look at my phone holder. The Nulaxy H18 is easy to use. The quick release mechanism is similar to a bike's wheel quick release mechanism.
👤The bike mount is great. I used it on my bike after buying it for my daughter. It is easy to use. It is easy to put your phone into this design. The mounts with rubber bands are more difficult to secure. There is a I'm very happy with this purchase. If your phone has a Popsocket, it's too thick to be held securely.
👤After my first ride with it, I wanted to return it. I had thrown the box away. The product isn't too bad but it isn't strong enough for scooter or bike use. The phone mount snapped where it was attached to the handlebar mount.
👤It's easy to install and it's pretty self explanatory. It's really sturdy, it's on my daughter's bike. She broke her cup holder from loading and unloading, but the phone holder is still functioning. If you need the navigation feature on your phone, it's easy to use.
👤I absolutely adore this! I have to take my phone with me when I go cycling because I am on call 24/7. It is easy to mount on the handlebars. I don't have to worry about my phone shaking or rattling while I am biking outdoors. I can see my phone screen while I am riding.
The phone holder is made of tough and stretchy silicone bands and can be stretched to fit all phones. Common brand cases are compatible. The Universal Handlebar Phone Mount is suitable for all 18-35mm handlebars. It is easy to remove the Silicone Buckle from the handlebar, it will firmly grip the handlebars and stay stable. Superior protection design. The bike phone holder has a one-piece design, complex manufacturing process and meticulous assembly. The phone can be prevented from colliding with a shock-Absorbing Silicone Pad. Soft silicone mounts won't cause any damage to your phone. Full Screen Friendly: rotation and full screen friendly. The curved silicone bands that never blocks the face ID, light sensor, home button and finger sensor are suitable for all screens. The cell phone holder allows you to view the phone from a variety of angles. 5000 stretching lifespans with high-quality silicone materials secure the functional reliability of the phone mount for years. Please let them know if you have a problem with the product you received.
👤Terrible. It's not that big so it can slide around in the mount. When it mounts to my bike, it's a flop. Absolutely terrible would never buy again and would never recommend anyone to anyone. I feel like the strap is going to break the plastic tab on my handlebars because it's pulled so hard. I can't see my screen because my phone flopped down when I put it in there. Absolutely worthless. I would love to return it. I threw the package away. After writing this review, I received an email almost every single day for almost two months from different email addresses asking me to remove the review and offer me different amounts of money to do so. They were relentless in their pursuit of it. I kept my review here because I didn't accept the money. This is not a good company to do business with.
👤I ordered the phone mount when it was on sale for 10 bucks. I wanted a quad lock that fit on the stem and not on the bars, so I looked at quad lock and rockform. I decided it was worth a try because I wasn't ready to use a quad lock kit. I didn't hold out much hope when I took it out of the box. It's small, and doesn't look much at all. It works better than I thought. I ride a lot of crappy roads so I expected a lot of shaking and vibration, but I got nothing. It's a solid mount and it holds my phone well. I have it in a otter defender. I was pleasantly surprised after several rides. I'm giving it 4 stars because it does attach to the stem on the side instead of dead center where I would like it to go. It's not noticeable when the phone is in. None of the clicks sits straight, but it has a click notch with a 360 degree ability. Two small things that I don't pay much attention to. I made a picture of it's slightly offset mounting.
👤I've tried a lot of phone mounts for bikes, but this one beats them all. It is easy to use and large enough that there is no stress on it when using a large phone. I've been using one for over 1.5 years now, at least 12 times a week, just to compare Finn mounts. There is a The first sign of wear was the top middle section of the silicone "strap", which I had to stretch back away from the notification bar of the phone, because it started cracking. I don't worry about it, even when it eventually fails, because I have experience with other mounts of this type, and they don't make phones fall out. The phone is not centered on the handle bar, which makes it spin around the handle bar on bumpy roads, and it shifted forward, which I don't like. You still can read your workout data even though the pivot mechanism is a bit wobbly. There is a This mount is recommended by me. I just received a new model, although I love how the middle section no longer covers the screen, unfortunately they did it by shortening the middle vertical straps, this made it less stretchy and much harder to attach a large phone. This will shorten it's life span because of the additional stress it receives, and I think it will not last me as long as the old model. They shorten the strap that holds the handle bar.
Out and out universal allows you to mount any cell phone to any bike, motorcycle, scooter or ATV with tubular handlebars. There are no tools required for installation. Works with cases. Extra secure rubber sling reduces road vibrations and firmly holds your phone while keeping its sensors, ports, and buttons unobstructed. To enjoy the comfort of your ride, you can adjust and secure your phone to any angle and position that suits you. The bike phone mount is easy to use and reliable. You should keep your hands on the handlebars. 100 to be safe! If you don't like your new bike phone mount, just contact them and they will make it right.
👤Customer service responded quickly to my email about how to access the screw on the cradle that had come loose. It was fixed in a few minutes and made sure that the screw was snug. It's not possible to give a 5 star because the screw shouldn't have become loose after 6-7 rides, the screw isn't tight enough during assembly, and the instructions for fixing it aren't clear. They could put a paper insert in the box with a diagram about how to tighen that screw if it becomes loose so the customer's phone doesn't fall away. I was lucky that didn't happen. Original review 8/26... It's perfect for what I wanted, it's easy to install on the top tube and cradle is stable while riding. The cradle connected to the ball joint attachment on the underside was loosened. See the video of it. I couldn't jiggle that, but now it's loose. I will no longer use the cradle as I ride down the road at 15 mph because I don't think it will fall to the ground with my phone in it. The balljoint attached to the base is still good. During the past two rides, the cradle loosened on all of the rides. I have a bike with shocks. There is nothing I can do to tighten the cradle piece so it doesn't appear fixable. Will try to contact customer service to find out if they can get a replacement cradle. Will update the review with results.
👤The mount said it would work with a pop sockets. Finding a mount to fit the phone in a pop sockets wasn't easy. I was a bit skeptical that this mount would be as good as it says. My phone is extremely secure and it fits well with both the case and the pop sockets attached. It's easy to install and hold it to my bike. The rubber grips hold my phone securely with no bouncing around, even going over 20 mph on my e-bike. I have been using this mount for about a month. I don't worry about my phone coming loose or being shaken so hard that it breaks my screen. It is easy to put the phone in the mount. The mount on the handlebars has not loosened even during high speeds and rough roads. While mountain biking on rough terrain, I would not hesitate to use this mount. It is the best phone mount I have ever purchased.
👤I like to go for bicycle rides. I use an app on my phone to see my time and distance. I didn't have a good place to keep my phone. I couldn't see it while riding if it was in my pocket. The Cawcar handlebar mount is the best solution for me. The easy to use holder fits my phone well. The whole unit can be attached to the handlebars by turning the knob. That is it! As I ride, I can see my progress. Thanks for the product!
👤Within a few rides, I have used two of these mounts, and both had the mount completely separate from the clamp. The rubber part of the phone becomes loose very quickly and the little ball sockets that hold it in place are supposed to keep it steady. There is a screw that goes from the ball sockets to the rubber portion on top and both have failed within hours. I'm not sure how this is possible, given the number of reviews. I got a second one because I thought I had gotten one of the few faulty ones, but now that both have fallen apart, I am forced to look elsewhere.
Stable and safe. The bike phone mount has a locking button on the side and four wear-resisting silicone claws on the corners, all of which will prevent your phone from being scratched. This design can hold your phone. The bike phone mount guarantees stability even when the road is bumpy. The degree of rotation is: The bike phone mount has a joint ball which allows it to be adjusted at almost any angle. The phone mount can be adjusted according to your perfect viewing angle. It's very convenient to meet with all of your needs. It is a great companion for your cycling journey. It is easy to fix this motorcycle phone mount by hand. Attach the base to the holder mount and tighten the nut cap. It's suitable for bicycles, motorcycles, babycar, electric scooter, etc. The handlebar diameter is 30mm. There is wide comparativebility. The bike/motorcycle phone mount is able to hold all smart phones with screen sizes of up to 6.8 inches. The mini/12/12 Pro Max is the same as the mini/12/12 Pro Max. Pro Max 11 is a Pro/XR/XS/XS MAX/X 8 Plus/7 Plus/7/6S Plus/6S. The phone holder can fit phones up to 15mm in thickness. A multi function holder. Don't think it's just a bicycle phone holder, it's really cool! You can use it as a phone stand, switch game holder, or even as a bike phone mount, which will make your life more convenient.
👤If you plan on using this mount on roads with bumps or potholes, steer clear. I used the mount on my electric scooter to hold my phone, but when I rode my phone suddenly popped out, and I was run over by 5 cars. The mount was installed properly and solid, but if your phone is heavy, it will cause it to unlatch. If you are actually using this on a bicycle, it is not a good idea to recommend this to anyone.
👤Even with a case, this mount works great. Your phone is locked up during riding. You can get it out with one hand once you unlocked it. Would buy again. I had one that used a plastic claw on each side of the phone and a rubber band on the bottom corners. That worked out well. I wondered if the rubber band would last in the sun and the elements and if it would break and send my phone flying. That won't be a problem with this mount.
👤My husband uses it on his road bike. His phone was put over a lot of things. My toddler knocked over the bike and the phone was stuck. We can see the map on an unfamiliar path with it.
👤This is a great phone holder for my phone even with my case. While riding a bike. The rubber inserts give a tighter fit around handle bars. Thank you for the great product.
👤I bought this one for the cheaper price, as there are other similar designs. It works for me. It seems a little awkward to install, maybe I need to practice. It holds the phone securely. No issues.
👤I use for my note. It's a tight fit with my phone case, but it's secure. It's easier to put the phone in the mount. A case-less Mote would be easier to use.
👤Huge disappointment. The plastic cap that holds the phone holder in place didn't thread when it arrived. After the first ride it wouldn't go on. After the second ride, the screw was coming off. I ride an electric scooter to work and the bike trail can get bumpy, but it was not functional from the beginning. Don't waste your money.
We mean out and out universal, which means mount any phone to any bike or motorcycle with tubular handlebars. The holder can fit any device up to 3.7" wide and all handlebars from 0.6" to 1.4" in diameter. There are no tools required for installation. AJUSTABLE GRIP. You can adjust and secure your phone to any angle and position you please with the special ball and brackets. The clip has extra secure and soapyabsorbent that is firmly and securely held. The band wraps around four corners of a cellphone. Make your most extreme race to make the phone fall out, be sure it won't! While your device is mounted, you have full phone access. You can use your phone for music. You don't need to unmount your phone or ipod. You should keep your hands on the handlebars. 100 to be safe! If you don't love your new bike phone mount, just contact them and they will make it right.
👤I was involved in a hit and run with a Semi Truck who was running a red light. I broke more than two dozen bones when my bike flipped and I believe the phone had no damage when I brought it to me. There is a I believe the device did its job. There is a He was carrying railroad ties.
👤If you're expecting RAM mount quality, you're going to be disappointed. I have a backup mount on my motorcycle. It works well. It's very easy to install. It's about 5 to $8 overpriced. For what you get, $20 seems a little high. I paid $60 for my RAM mount. When I put my phone in the RAM mount holder, I don't look down to make sure it's secure, like I do with this one. If you have more money, get the RAM mount.
👤I ride a hybrid bike for exercise and for fun. My wife wanted me to get a gps system that would let me know my location and she wanted me to press a button to alert the emergency services. I found this device that held my cell phone in place and only 2 feet away from my voice. I bought and rode in a field a few days later. I found the only hole and dumped the bike. A gash on my leg caused the dirt to be wiped off my ride. The phone never moved. This device is all they have to say. The cell is held firmly.
👤I used this mount to hold my phone while biking, it was only a year old. The terrain was mostly bike paths and roads. The mount broke off at the area where the stem connects with the base. The phone fell down and hit the spokes, causing the wheel to stop. If it weren't for my helmet, I could have suffered serious injuries when I was thrown from the bike. I had many injuries, including a few fractured bones. I thought the ball and brackets must have loosened, or something happened with the bar. The stem snapped away from the base of the clamp. The phone was not heavy and the straps were still intact. The stem snapped. The phone was seated correctly, the holder was installed correctly, and there was no human error involved. I am angry about this and would recommend you to consider my experience before purchasing. Again, my rides are not at all rugged or extreme, and there was nothing unusual or out of the ordinary with this particular ride. I was in the emergency room and I am thankful that it wasn't worse. I would give the product zero stars.
👤I bought this because I misplace my phone mount. When I am not actually looking for it, I expect to find an inexpensive replacement option. This mount works great. I don't know if I'll put my other mount back on. It is very sturdy. My phone did not vibrate very much in this mount, despite the fact that it vibrates with a Harley. I use a large protective case over the Note 5 and it has no issues fitting inside. The securing straps are a nice feature, but I don't think it would hold the phone well without them. It came with an extra set of straps in case they broke. They might get weaker with exposure to the sun. I would recommend this mount to anyone who is looking for an inexpensive mount. Well done!
The bike phone mount is made of high-quality silicone and plastic, special designed for cellphones and can hold the phone tightly. The bike phone holder is a great accessory for cyclists. All-round degree can be adjusted. The bike phone mount has a joint ball which allows it to be adjusted at almost any angle. It's very convenient to meet with all of your needs. The motorcycle phone mount is easy to install. There are two steps, one pull and one dial. The lock switch design makes it easy to fix the phone in the bike phone holder. The bike/motorcycle phone mount has four retractable protection conners, which allow the bike/motorcycle phone holder to firmly hold a phone with a screen of up to 7.8 inches. The bike phone mounts are designed for handlebars. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, spin bike. The handlebar's diameter is 0.6 - 1.18" (15-30mm). There are powersports-electrical-device-mounts.
👤A good phone mount. The included rubber spacers are easy to install and handle a lot of different handlebars. Common bicycle handlebars range from 22mm to 31.8mm. The larger size of 31.8mm is not going to work with this mount because it's not spec'ed to handle 15-30mm. There is a little bit of vertical play but not enough for the phone to pop out accidentally, though the holder grips my phone reasonably well. It is easy to remove the phone from the holder.
👤The type of cell phone holders I use has worked best for me. The handlebars of my e bikes have 2 attached to them. The phones are held securely and snap in and out with almost no effort. They will not fall out. The mount does not shift position while riding. The entire phone screen is visible when I use apps to map my rides. My phone fits and is a moto g power. If you have a lager phone, there is a small amount of room left.
👤The device is easy to install but my phone position won't stay put. The phone arm is moving downward because of the pot holes on the bike. If anyone is wondering, I can't tighten the back joint anymore. I think it would be better for someone to bike on a smooth road.
👤If you have a thick case like a Morphie or a battery back-up case, I don't recommend this. The phone holder doesn't have enough depth to fit it. I have to remove my case to use the mount. The phone is in it's case. It would be difficult to get it all the way out if it was tightened properly. There is a The material is cheap, thin and plastic, but so far it is holding up. This is not a long term solution for my motorcycle. It works for now.
👤It's too small for my phone and won't clear the controls for my motorcycle, so I can't use it. The pivot piece fell while attempting to install and was lost. First, check your clearances and phone sizes.
👤It was hard to install and has a poor phone lock feature. Thanks to multiple shock absorber strips, it was sturdy. If you have enough space below the handle, it will work for you. I wanted to put it at my motorcycle centre, but it wasn't possible. After placing it, it was difficult to put the phone lock on. I had an issue with the lock on my phone, I was not able to tighten it any time.
👤This is great. The otter box is very tight. I bought a second one for her bike. Didn't like the rubber bands that held the phone. The touch screen is hard to use with the cover over the phone, so I didn't like the packs that the phone slips into. You can adjust the angle so you can see it.
👤It is in place. None of the others I owned did. The phone stays in place where I can see it and not move around the handlebars to point at the ground. Very happy!
The bike mount on the Super Stable is military grade. The Andobil bike phone mount has a non-slip/scratch-resistant silicone cushion and flexible clamping arms, so it will not fall off even in sudden braking or steep roads. You can come with double shock-absorbing Silicone bands, which can be stretched up to 4 times to hold your phone, not only protect your phone in the craziest adventure. The ball joint gives you the ideal viewing angle and allows you to switch between portrait and landscape view in a matter of seconds. The open-face design allows you to fully experience the joy of riding or sporting, because it has full-screen access and different lengths' clamps avoid pressing the volume key. The universal phone holder for bicycle has a clip that fits most phones. It's compatible with the iPhone 12. Mini/11 Pro/11 Pro Max/SE/Xs Max/XR/Xs Plus/6 Plus/7 Plus Plus/7/7 plus/6 plus/6 plus/4 There are more than one, including the following: the S20/S21/Note20/A51/S8/S8 Plus/S7/S10/S10 Plus/S9 Plus/Note 8, the S9 Plus/Note 8, the S10 Plus/S9 Plus It is easy to install the bike cell phone holder on the handlebars. The phone holder for bike handlebars has a scratch-free rubber pad and can be adjusted to fit any bike. Andobil puts the customer's experience in the first and insists on making high-quality products. Please let them know if you have any usage problems or product suggestions. They will improve their products. There is a one-year hassle-free service. If you have a problem with andobil's phone bike holder, please mail them and they'll get to you in 12 hours. package box, nut, phone mount base, and user manual.
👤During the time of COVID-19, I bought a bike so I could get some exercise. I was more than happy to review this mount when I was approached by this company. There is a The mount is made of rubber. It has an additional rubber phone holder to hold larger phones. Up to 7 in length and 4.5 in width. The device is very flexible. I can change my phone's orientation with ease. There is a The phone is secured to the bike. The amount of slip is limited by groves of rubber teeth. My daughter attached it to the baby stroller. She won't give it back.
👤The skyforce95 is very easy to install and mount, and it is secure and easy to change.
👤The Andobil holder broke off when I was riding on a bumpy road at 20 miles per hour. I contacted Andobil and asked if I could get a replacement. It took me a long time to use it because I was lucky to have my phone undamaged. I have been using the new unit for about 3 months and it has been the same thing. The Andobil piece holding my phone went flying and landed in the middle of a busy road when the unit broke in half. I was able to stop cars from riding over the phone after pivoting my bike. The phone was saved from damage by the protective case. It might be a freak event. Two times...no.
👤Delivery was on time. The packaging looks good. Assembly and instructions were easy to follow. The product is well placed on the handlebars. I haven't had any issues with the connections or the straps, it's plastic I think it is a good product. It is brand new. I would feel comfortable using this on a road or mountain bike. The bike can be moved to different bikes depending on my needs, and I like that it's quick. I love their proactive and responsive customer service. I would be very comfortable buying this again and working with this company.
👤I bought this for my new phone less than a month ago. It was easy to install. I only used it once, when I received an email from Andobil that another customer had complained about their mount breaking. Even though I had no problem with my original order, Andobil wanted to send me a new mount. The new mount is easy to install and I received it very quickly. It is easy to use. I highly recommend. Customer service is top notch and the product is high quality.
👤The mount works well for me. The rubber band holds my G5 in place. The side brackets are sturdy and l-shaped to provide additional safety. The handlebar is large, easy to tighten, and the soft rubber pads are attached to the brackets so it can't move, which was a problem with my old mount.
👤I've used a number of phone holders for my motorcycle, and this one is the best. It is low profile and blends in nicely with my ape hangers. It is easy to adjust the phone.
There is a bike phone holder. The upgrade bicycle phone mount allows you to remove the phone without having to disassemble the entire bike stand, making it easy to send and receive emails or texts, answer calls, take selfies, and more. The perfect companion for a bike ride. The phone holder is made of tough and stretchy silicone bands and can be stretched to fit all phones. Pro 12 Pro Max/12 mini, Pro 11 Pro Max/X/Xs/Xs Max/Xr, Pro 12 Pro Max/X/Xs/Xr, Pro 12 Pro Max/X/Xs/Xr, Pro 12 Pro Max/X/X The Universal Handlebar Phone Mount is suitable for all 20-45mm handlebars. The built-in Silicone Pad will firmly grip your handlebars, no matter what the terrain, and it's also easy to remove. Full Screen Friendly and rotation. The curved silicone bands that never block the face ID, light sensor, home button, and finger sensor are suitable for all screens. A cell phone holder that rotates allows you to see the phone at a different angle. VUP Bike Phone Stand 8000 stretching lifespans with high-quality silicone materials to secure the functional reliability of the phone mount for years. Please let them know if you have a problem with the product.
👤I didn't want to test this phone holder at the extremes, but after I was hit by a car on my bike, my phone was still in the holder and undamaged. I already did it for you, so don't test it in this way.
👤I bought this for my motorcycle because my handlebars didn't have enough room to hold the mount. I thought it would fit between the brake and the handlebars on my Harley because it had a thin rubber clasp with a twist drive to tighten. I rode to 1800 miles with this thing attached, it doesn't move, and the screen stays in place. If I had to take the phone with me on the bike, it was easy to push down and twist the phone's release. This product is very well built and inexpensive, would highly recommend it.
👤The pull through strap and knob tightener is easy to install. It's not easy to attach a phone holder to a mount, you have to get used to the way it works and make sure you line it up correctly. The strap system holds the phone in the holder. It is very secure because you have to pull the straps around the corners of the phone. There is a The ability to remove the phone holder from the phone and take a picture is a great feature. There is a The phone is held to the handlebars by this thing. I did some rough mountain trails and it worked out without a hitch. Highly recommended.
👤I use it to find trail maps on my mountain bike. There is a The ability to remove the phone from the holder was important. I wanted a way to quickly remove the phone from its holder without disrupting the setup. There is a You can set the snugness of the holder to the amount you need so the phone doesn't bounce around on bumps excessively, and is held securely, if you turn a knob. There is a The low profile of the holder keeps the phone from getting bumped. It's better than I thought it would be. It's a no-brainer for the price.
👤This is the phone mount to get if you don't want to pay $60 for the Quad Lock. When I ride over rocky terrain, I add a star because of theVersatility of this mount, but I subtract a star because of my 7plus phone rattles. I love that I can remove my phone while on the go. It will detach on its own.
👤I bought this because I was tired of fumbling for my phone while cycling. The product did a good job, but the elastic that held my phone wasn't great. The elastic snapped at the precise moment I rode over the speedbump. My phone fell down and cracked. There is a So would I recommend something? No. It's not worth the cost to fix my phone glass if it had broken.
👤The bike phone holder is five stars from me, although it was a little tricky to mount on the handle bar, the trick is to press as hard as possible to make the tip of the band sit just right. It works great for my road bike and I don't remove the case from my phone as it is slim enough and the rubber/Silicone holder grips it just right.
Bicycle phone holder iphone 12 pro max products from Andobil. In this article about bicycle phone holder iphone 12 pro max you can see why people choose the product. Lamicall and Gub are also good brands to look for when you are finding bicycle phone holder iphone 12 pro max.
Andobil, Lamicall and Gub are some of the best brands that chosen by people for bicycle phone holder iphone 12 pro max. Find the detail in this article. Nulaxy, Vup and Caw.car Accessories are also brands that their products are worth to check.