Best Bicycle Phone Holder Iphone 11

Holder 28 Sep 2022 10+ Comments Open

1. Bike Motorcycle Phone Mount Motorbike

Bike Motorcycle Phone Mount Motorbike

Out and out universal allows you to mount any phone to any bike or motorcycle with tubular handlebars. There are no tools required for installation. The extra secure clip has silicone belts that grip the phone firmly. The phone will not fall if it is made the most extreme ride. AJUSTABLE GRIP. You can adjust your phone to any position that suits you, and enjoy the comfort of your ride. Full phone access includes screen, buttons and mic jack. You don't need to unmount your phone. You should keep your hands on the handlebars. To safeness is 100. If you don't like your new bike phone mount, just contact them and they will make it right.

Brand: Caw.car Accessories

👤Quality purchase would purchase again or recommend it to anyone after being tested on the handlebars of my motorcycle at 90 miles per hour. It was on time. The bike phone and mount survived the wreck. I ordered another one because I forgot to remove the mount before the bike was totaled. Someone pulled out in front of me and totaled my motorcycle. The phone mount was left with the bike when the insurance company claimed it. The first thing I bought for my new bike was this. I bought 2 because I still stand by my original review.

👤It was easy to install and comes with an extra set of corner grips. I haven't ridden it yet to see how it holds up. I will give it five stars if it does. The product has passed the test and I have given it five stars. The bike path is fairly smooth, but there are a few areas with serious bumps due to blunt edge covers over electrical hubs. When you pass over them, they are large enough to get you off your seat. I have been on a few rides and there has been no movement. It stays nice and secure when my phone is strapped in. The main reason I chose this product was that I have access to all the buttons on my phone while it is in the unit.

👤I attached my phone mount to my mountain bike and went around the neighborhood streets, sidewalks, and trails. The trails ranged from packed dirt to rocks and gravel, and my phone stayed secure the entire time. There are brackets on the sides of the phone that would be secure enough for riding on the street. I attached the bands to all corners and my phone wouldn't budge on the rocky trails. All the bands were on when I got home. There is a The handlebar clip is easy to install. The phone can be used to portrait or landscape. It takes some gentle force to click to each position which I appreciate because it adds to the security of the phone. The phone doesn't move forward or back when you mount it, so you just put it in the position you want. One of the main criteria I wanted was that the rubber straps did not block the cameras. Absolutely worth the price and will definitely recommend to friends and family.

👤I've purchased a CAW phone holder before. The plastic adjustment nut on the back side split apart after a year or so. To return late. I bought another CAW because I liked what I had. I use it on my mountain bike, Big Dog motorcycle, tripod and a selfie stick. I think this is a better design and more durab. It looks like CAW has added this design to their product line.

👤This is a great mount. This is the one to get if you want a phone mount for your motorcycle. Two mechanisms are used to secure the phone. I forgot to put the bands on the corners of the phone and the spring vice on the sides held the phone with out issue, and I was going 70 mph down the freeway. I think that the reliability of this mount was proved by the fact that the phone did not move. If you are in the market for a phone mount, I encourage you to buy this mount. The Bands are recommended by the manufacturer for maximum reliability and will help secure on bumps.

2. Vibrelli Universal Bike Phone Mount

Vibrelli Universal Bike Phone Mount

If you don't like your new bike phone mount, just contact them and they will make it right. Bike and motorcycle compatible handlebars are from 0.9” to 1.3” in diameter. The bike and motorcycle phone mount is great for scooters, ATVs, e- bikes, road, and MTB. It fits any phone up to 3.8 inches wide. The bands are firmly grips. The bike phone holder is guaranteed to hold large phones. The design has three silicone bands and strong side clamps. The bicycle phone mount looks great. It is the perfect bike or motorcycle phone holder. The bike phone holder doesn't block screen access. You can use your entire screen, buttons, and headphones without removing your device. The motorcycle cell phone mount has a ball and sockets that can be adjusted to any angle. The 5-year manufacturer's warranty is why the bike phone mount is built to last. Cyclists designed it. The 5-year manufacturer's warranty is why the bike phone mount is built to last. Cyclists designed it.

Brand: Vibrelli

👤I wasn't sure if a less expensive product would be able to keep my huge phone. This product has exceeded expectations, even though it is attached to my handlebars, and is held still enough to read/use while biking. The center grip closes tightly around the phone. After attaching all 4 corners of the rubber piece, my phone has become a bike. The phone and mount have not slipped on my handlebars or out of the mount. If you take a few extra moments to secure it properly, you've got yourself a top-notch product for an extremely reasonable price. They include 2 extra rubber rubber. If you happen to break one or two along the way, you need to mount "nets" for when the primary one experiences natural wear and tear.

👤I was worried about how much of the product was plastic but so far there have been no visible cracks or breaks. It isn't designed for skinner handle bars like on hondas, but lucky they provide 3 rubber filler strips I sandwiched together to get a snug fit onto the handle bars. Installation took under 4 minutes. I was able to do it in the middle of the night. The rubber net is a good fail safe if the phone is knocked loose. On a windy day, I took this up to 74 mph on a naked bike and it stayed in place. If you hit your arm against the mount while dismounting your bike, it's sensitive, but for the price, it does everything. I use a thick UAG trooper case for my phone and it pushes the limits of the mount by at least 85% and the rubber net by at least 90% to help people figure out what size phone can fit.

👤I have a large and expensive item. I wanted to use it on my ride. I'm afraid it will fail off. The rubber securing the product made me take a chance on it. I love it! The phone is immobile. I can now play my music through my headphones. I don't lose the connection. I bought a second one for my bike. If you've ever been on San Diego streets, you know how bad they are. Again, rock solid. Love it.

👤The phone mount on their website is $68 and I didn't want to buy it for my scooter, which is URB-E. I thought I could go wrong with this one, even though it was more positive than the other one, but I bought it anyways. The average bike bar is larger than my URB-E's Mount bar. I used all the rubber seals that came with the phone mount and it worked well. I commute to work every day. Two and a half blocks from my first train, I connect to my second train, and then I ride my scooter through Hollywood to West Hollywood for 2.5 miles. The roads in Hollywood/West Hollywood are really bad and this phone mount holds up and handles the bumpy ride really well. You can't beat the price, I'm very happy with this purchase. It is amazing! I highly recommend. I didn't need to read any instructions as it's very easy to understand when you look at the pieces in the box. The packaging and shipping were all good.

3. Motorcycle Bike Phone Mount Holder

Motorcycle Bike Phone Mount Holder

Universal Studios. Their bike phone holder is compatible with phones up to 3.5′′ wide, and can fit handlebars from 7/8" to 1-1/4" in diameter. The clip-on style handlebars will not fit super sport bikes. It's safe. Their premium motorcycle phone mount allows you to safely secure your device using two points of contact, a premium plastic grip, and a Silicone net. Securing: The phone holder for bike use is made from premium quality plastic and has a strong silicone net that won't crack or break in extreme weather conditions. It is comparable. This bicycle phone mount is compatible with all of the following phones: the iPhone 13 Pro, 13, 13 mini, 12 Pro Max, 12 Pro, 12, 12 mini, SE (2nd Gen), 11 Pro Max, 11 Pro, 11, XS Max, XS, XR, X, and the S Refer to the guide for more. Customer happiness is a topic. Their customer support team is available to assist you with all your needs, whether you're buying this bike cell phone holder for yourself or as a gift for the bike enthusiast in your life.

Brand: Roam

👤I use this phone mount every time I ride my bike, and it's been about a year since I got this. The price is unbeatable. I was worried that my phone would come loose on the trails, but the design is very secure and not once has my phone come loose. The side buttons on the phone can be accidentally pressed by the straps that secure the phone, but it's easy to slide the straps on without getting close to them. There are times when I want to take a picture with my phone while I'm riding. I'm not sure if a design that secures the phone safely would be easy to free up, but I do know that it takes a little doing. It is an excellent product.

👤I bought this for my motorcycle. It's a custom bike. I use a cruise around 80 to 90 miles an hour. It fits my handlebars because they're big and they give you two different sizes for them. You can get multiple sizes for your phone. It's great to get more pieces, but they're also sturdy. You know that your phone is secure and won't blow off the bike when it costs 800 to $1,200 a phone.

👤I use this with my Iphone Xs for mountain biking and have never had the phone come loose even after small jumps. I loosened it after the crash, but it didn't come out of the corner straps. I love that I can use my trail mapping app and have all the functions of my phone, even though the old bike computer had limited functions. I gave my son and daughter one because I liked it so much. The upgrade over the old bike computer is what they love. The pivot needs to be tight to keep your phone from moving, but it can be done with a light rotation with pliers.

👤I was worried that it would be a junk product. I tested it on a junk phone. At just over 80 mph, there was no movement at all. I took a few test rides on the bike and grabbed my phone. After hitting the freeway, I repeated my 80 mph test. The phone was still in place despite being bigger. I don't suggest that. I opened the bike up to over 100 and held on. I am pretty sure my bike was telling me to knock this off. I'm confident in the product. Even came with extra tie downs. You can change them out if they become questionable. There is a Well designed for me.

👤I bought this for my custom Harley. I had to replace my phone after the ball and stem snapped off on the highway, ruining it. Very sad.

👤That lasted a week. If you own a Harley, I don't recommend it a lot.

👤Had great expectations for this mount, since it has great reviews. Only lasted a few days. My phone fell to the ground when the main hold snapped. The best they could do was to give me a replacement mount after I contacted the company to explain what happened. They didn't offer to replace my phone or screen. It was very disappointing.

4. Metal Motorcycle Mount Phone 360°Rotating

Metal Motorcycle Mount Phone 360%C2%B0Rotating

The GUB mobile phone holder is made of aluminum alloy and has a number of functions. The phone mount keeps your phone in place even when you're moving at 75 mph. The double universal ball can be switched between horizontal and vertical screens. The phone holder has retractable clips on the left and right sides, a claw hook on the top, and a strong spring to fix the phone if it falls, making it more stable, safe, and no worries. Handlebar diameter is 0.86-1.3" (22-33mm) suitable for various types of motorcycle, mountain bike, stroller, scooter, bike, golf cart and so on. It's possible to use a phone for Universal Studios. Universal motorcycle/bike cell phone holder is suitable for the following phones: iPhone 13 12 Pro Max Mini Xs XR X 8 Plus 7 6s 6, Note 9, and other.

Brand: Gub

👤My husband needed a phone mount to hold his phone. He is the foreman of a civil construction company and he makes and receives phone calls. He doesn't have to stop to screen the call with the phone mount. He has mounted it in his bulldozer so that he can see who is calling, answer the call, and talk handsfree. There is a He had a different one in the Amazon cart. We took a chance on this one and it was a good one. It seems very sturdy. He is being bounced around quite a bit, but he is not vibrating or wobbling as I have 888-276-5932 There is a We bought 2. My husband is fond of him. The other was for someone else. Both are very happy.

👤We needed a sturdy phone mount for my Co-Pilot's heavy phone. The mount is designed to articulate in many different directions so she can see her phone while I am driving, as well as being well designed and made. It mounted easily and securely to the illuminated grab handle by her seat in the RV, but with all the mounting options it could easily be mounted in other vehicles or heavy equipment.

👤I have it mounted on a golf cart. The golf cart has a round mounting system that mounts around the side rail. All the bumps on my course have been sturdy so far.

👤It's easy to install. Instructions need to be easy to understand. It takes a few seconds to put my phone in the holder, but it's worth it to have a secure and non shakey phone. Definitely recommend!

👤The phone holder is very strong. The whole thing is made of metal and is not likely to fall off easily. The phone is held in place by strong springs and will not be going anywhere I don't want it to.

👤A solid mount that is a bit bulky. Use all metal parts. It's easy to tighten and adjust. Highly recommended. It was worth it for the price.

👤I didn't think I had enough room. This was a perfect fit. I can charge my bike, watch morning news, and free up my pockets with theusb charging on it.

👤It's difficult to fit a phone. You need to hold the phone in your hands. I got the Quad Lock brand after returning it. It's more expensive. It's worth it.

5. Beam Electronics Smartphone Car Mount

Beam Electronics Smartphone Car Mount

Press the button on the back of the unit to take out the phone. Press the arms on both sides to tighten the phone, it's simple to do. The best viewing angle is provided by the fully 360- degree rotation. The holder is used to ensure safe driving. Broad Compatibility: passed a wide range of tests and is compatible with most cellphones. The holding system is attractive and suitable for a wide range of electronic devices. Installation and removal of smart phones is simple. Simplistic installation, single-handed operation, no tools needed. Most cell phone devices are compatible with this car phone mount holder.

Brand: Beam Electronics

👤I was skeptical about the quality of this mount because of the price, but I can tell you that it is very good. I am shocked. This thing has a great rating. You can buy a few while you're at it. I have 3 of them in my cars. No matter the orientation, it holds my phone. I haven't had a problem with the phone slipping. The only problem I have so far is the tightening screw. I thought it was my fault. I was scared to overtighten the screw because it's plastic. The phone flopped around when the screw came loose. I tightened it the second time and it didn't have an issue since. Go ahead and purchase it. I researched a few mounts and found this to be the winner.

👤I ordered a second phone holder for our other car because this one is very nice. It's easy to install and remove, it holds the phone securely from three directions, and you can check it every week to make sure it's not slipping off. The bottom shelf is nice, and the side holders have small lips to hold the phone in place, which is nice since my former holder did not have one. The phone holder sticks to the window. It wasn't good for my phones, which tend to heat up when used as gpss. It's easy to keep the phone cool because the holder mounts on an air vent.

👤A great purchase at a great price. I've seen similar pieces before. None of them made it to a good rating. We found what we were looking for. It's easy to take your phone off. It's good quality and sturdy. It's easy to take off with one hand. I was concerned about the weight of the air vent, but it was not a problem.

👤This is what I needed. I use the gps on my phone whenever I go somewhere. It helps me by alerting me to the best route when there's a lot of traffic. With the new hands free laws, I had to find a way to continue using my phone without holding it. This is a solution that works. I tried a holder on the dash that wouldn't stick to my car. My car has horizontal and vertical air vent in the middle. It works great on the middle vent, but it blocks the view of my backup camera. I tried it on the vertical vent, which solved my backup camera problem, but the phone flopped from side to side every time I turned. After about 2 weeks of use, I don't notice the issue with my backup camera anymore. This one seems to be easier to use than other versions. It's easy to put the phone in the holder and the button release is smooth, making it easy to remove the phone.

👤Was concerned that the product wouldn't hold the iPhone 6s inside. Even though the box is larger than the two bottom feet of the holder, I am happy to say it did. I had to squeeze the two sides to make sure they held the box tightly. The phone fell out while I was on a long trip of nearly 1000 miles. You can angle the phone to avoid glare by using the ball and sockets. If you have big fat fingers, it's difficult to tighten the nut on the rear. It would be nice if that lever used to tighten the air vent vane was the same one used to tighten the car's air vent vane.

6. Detachable Rotatable Motorcycle Handlebar Universal

Detachable Rotatable Motorcycle Handlebar Universal

Debilitating and Pareto: Attaching and detaching phones can be done quickly and easily. You can use your phone in a landscape or vertical position, it's great for maps, navigation, recording or music. GRABFIRMLY & NO SCRATCH: Ensure to grip the handlebars firmly with the upgraded screw design. There is a soft rubber under the screw belt that will protect your bicycle. The screw belt is long enough to fix the handlebar. The screen and buttons are friendly. All buttons and touch control of smart phones can be accessed with an open face design. The second generation of curved phone fix band is perfect for the iPhone Xs Max/ Xs/ XR/ X and will not block the Face ID, Touch ID and camera at all. There is wide comparativebility. Aonkey bicycle phone mount can securely hold most smart phones with screen sizes from 4” to 6.5” and can be used in or out phone case. You can use the phone holder on bicycle or motorcycle, as well as fix your phone on a stroller, treadmill, shopping cart, or any place you have a round bar. If you don't like the bicycle phone mount, you can contact them and they will replace it for free.

Brand: Aonkey

👤I purchased one of these after reading other reviews. I had other phone holders on my bike. My phone was out of the others. It's not good for the screen. There is a This one is great. It's easy to install. I love that I can take my phone off the base and use it again. The buttons and screen of my S8 are accessible. I bought a second phone mount for my husband because I was happy. It has held our phones in place even through the 75 mile distance.

👤I use this product for my hybrid bicycle, which I ride for pleasure on weekends, riding up to 20 miles on average. The main reason I chose this product over others was the ability to easily detach the phone from the mount. The issue is that the way this mount is made, while it's study and the phone probably won't fall out, makes the phone rattle when riding over even slightly even surfaces. The louder the rattling noise gets, the worse the ground surface is. The noise is loud and annoying and when I am riding next to other bikers, I can hear them listening to it. There is a The mount is connected to the handlebars and this rattling noise happens regardless. I'm not sure if I'll keep it or return it, because I'm waiting to see if other buyers or the seller will answer the question I asked about whether this is a fixable issue. There is a I think it's a bit overpriced for what it is, and given the design flaw. It should be $10-12.

👤I put the phone mount on the handlebars of the bike. Installation is easy and the mount is not moving. I attached my phone to the mount and gave it a "stress test" to make sure it wouldn't fall off under normal riding conditions. I tested the removal and re-attachment of the phone. I was over complicating it and it took me a few tries to get it. I was trying to remove the phone like a gorilla, twisting it out. Push down and twist is all that is needed. Same with re-attachment. There is a The mount would be deserving of 5 easily, so I gave it 4 stars instead of 5. When I ride my phone on the road, it will rattle on a less then perfect smooth road or when I hit bumps, even though I have a defense case on the phone. This is not a show stopping irritation. I found that placing business cards under the mount between the phone and the mount made the issue go away. It's an excellent mount and many times worth it's price.

👤After I dropped my phone down a steep trail, it cracked the screen and I couldn't use it. The attachment piece is critical to the success of this one. Even with a good front suspension, if the brackets are too rigid it will eventually crack or fail, so anything that absorbs vibration is good. The stretch bands on this one are tight, but they still work with large note 20. Adding a rubber butterfly to my monarch case is one of the extra steps I have to take, it protects the case from any damage and makes it silent.

7. Andobil Protection Motorcycle Universal Compatible

Andobil Protection Motorcycle Universal Compatible

The Andobil bike phone mount features four corrugated silicone cushions that wrap your phone, keeping it from scratches and vibration. Ensure the safety of your phone. The smart phone will stay in the bike phone holder and not move. With high protection. On bumpy roads, achieve the ultimate stability and security. The bicycle phone mount is the easiest to operate, it can be locked/released with one hand. Pull down the mount to install and release the phone, it's convenient to take photos or videos with your friends during the ride. Won't miss anything. The Andobil bike phone mount has a security lock at the back that can tightly lock your phone on the mount, make sure the phone doesn't drop even if it shakes violently. The bike phone holder can be fastened to the handlebars with a tightened screw. There won't be any sliding. It can ensure the safety of mobile phones in high-speed cycling or harsh road conditions with the security lock and upgraded handlebar design. Installation is easy and quick without tools. The bicycle phone holder is very easy to attach or detach from the handlebars. Attach the nut to the handlebars. Any handlebars between 15mm and 45mm (0.6- 1.75 in) diameter are suitable for the size of the clamp. Such as bike, motorcycle, scooter, treadmill, stroller. The upgrade clamp 3.0 has soft rubber pads with non-slip, firm and non-scratch characteristics. The bike phone holder with ball joint allows you to adjust the angle while riding. Your phone can be oriented to portrait, landscape, or any angle in between, if you choose to, thanks to the 360-degree head. The Andobil bike phone holder is compatible with all phones with a minimum thickness of 15mm. Pro 12 Pro Max, S22/S21/S20, Note 20/ Note 10/S10/S10E/S9/S9 Plus.

Brand: Andobil

👤It was easy to install and hold the phone.

👤The bike phone mount works. Sturdy and well-equipped to hold handlebars. And it stays in place.

👤This mount is very strong and easy to install and remove. I plan on using it on my motorcycle as well. I have a phone. My phone is big enough to fit in the mount. If your phone is bigger, it might not fit.

👤Fantastic product. It was easy to set up. The steps to mount the phone were easy to follow. The corner ends expand when you push down. To lock into place, you just have a simple switch in the back. This is the best bicycle phone mount I've tried.

👤The bike phone holder is the best of the best, very sturdy, and holds my phone note 9 without any issues, I just love it.

👤The product does what it was supposed to do. I use it on my Can-am and it works great.

👤It is easy to install and holds the phone well.

👤Me parece un producto, pero resistente al movimiento propio de una motocicleta. No se abra accidental.

8. Bike Motorcycle Cell Phone Mount

Bike Motorcycle Cell Phone Mount

We mean out and out universal, which means mount any phone to any bike or motorcycle with tubular handlebars. The holder can fit any device up to 3.7" wide and all handlebars from 0.6" to 1.4" in diameter. There are no tools required for installation. AJUSTABLE GRIP. You can adjust and secure your phone to any angle and position you please with the special ball and brackets. The clip has extra secure and soapyabsorbent that is firmly and securely held. The band wraps around four corners of a cellphone. Make your most extreme race to make the phone fall out, be sure it won't! While your device is mounted, you have full phone access. You can use your phone for music. You don't need to unmount your phone or ipod. You should keep your hands on the handlebars. 100 to be safe! If you don't love your new bike phone mount, just contact them and they will make it right.

Brand: Caw.car Accessories

👤I was involved in a hit and run with a Semi Truck who was running a red light. I broke more than two dozen bones when my bike flipped and I believe the phone had no damage when I brought it to me. There is a I believe the device did its job. There is a He was carrying railroad ties.

👤If you're expecting RAM mount quality, you're going to be disappointed. I have a backup mount on my motorcycle. It works well. It's very easy to install. It's about 5 to $8 overpriced. For what you get, $20 seems a little high. I paid $60 for my RAM mount. When I put my phone in the RAM mount holder, I don't look down to make sure it's secure, like I do with this one. If you have more money, get the RAM mount.

👤I ride a hybrid bike for exercise and for fun. My wife wanted me to get a gps system that would let me know my location and she wanted me to press a button to alert the emergency services. I found this device that held my cell phone in place and only 2 feet away from my voice. I bought and rode in a field a few days later. I found the only hole and dumped the bike. A gash on my leg caused the dirt to be wiped off my ride. The phone never moved. This device is all they have to say. The cell is held firmly.

👤I used this mount to hold my phone while biking, it was only a year old. The terrain was mostly bike paths and roads. The mount broke off at the area where the stem connects with the base. The phone fell down and hit the spokes, causing the wheel to stop. If it weren't for my helmet, I could have suffered serious injuries when I was thrown from the bike. I had many injuries, including a few fractured bones. I thought the ball and brackets must have loosened, or something happened with the bar. The stem snapped away from the base of the clamp. The phone was not heavy and the straps were still intact. The stem snapped. The phone was seated correctly, the holder was installed correctly, and there was no human error involved. I am angry about this and would recommend you to consider my experience before purchasing. Again, my rides are not at all rugged or extreme, and there was nothing unusual or out of the ordinary with this particular ride. I was in the emergency room and I am thankful that it wasn't worse. I would give the product zero stars.

👤I bought this because I misplace my phone mount. When I am not actually looking for it, I expect to find an inexpensive replacement option. This mount works great. I don't know if I'll put my other mount back on. It is very sturdy. My phone did not vibrate very much in this mount, despite the fact that it vibrates with a Harley. I use a large protective case over the Note 5 and it has no issues fitting inside. The securing straps are a nice feature, but I don't think it would hold the phone well without them. It came with an extra set of straps in case they broke. They might get weaker with exposure to the sun. I would recommend this mount to anyone who is looking for an inexpensive mount. Well done!

9. Universal Bicycle Handlebar Samsung Smartphone

Universal Bicycle Handlebar Samsung Smartphone

Touch ID andFACE ID are used. The phone holder is compatible with the Face ID sensor on the Apple phones. The Bike Stem Mount is designed to turn your phone into a professional cycling computer. Flexible silicone bands fit most phones and cases between 4 to 6.5 inches. Rugged cases might not fit larger phones. Soft-touch silicone material absorbs bumps and protects your devices and accessories. Buy with confidence with their 100% satisfaction policy. They can offer a replacement or refund for quality issues.

Brand: Bone

👤I was expecting this to work as well as it did. I mounted it on the stem of my bike after I used it with my S8 in an otterbox. Most of the 100 miles were on gravel roads and trails. The phone felt flimsy when I first put it in place. I rode it down the alley and it seemed to hold it in place. I kept it on for my tour. I was able to view my phone, which I used for navigation. When I went down a steep descent, my front wheel sank into the sand. The crash twisted my brake levers and put a big hole in my helmet, because I went flying over the bars. I was expecting to have to look for my phone after the impact, but it was completely undamaged.

👤I used it this morning on a 22 mile ride after buying it yesterday. The corner bands are so close to the edge of the phone that I was afraid it would go flying. Even when I reached around the back to use the fingerprints on my phone, it held up. I hit some substantial bumps as well as some repetitive vibrations and it held my V40 thinQ securely the whole time. I am happy with this case, it is better than my old one. There is a I have had this phone holder for about a year and a half. The corner bands just broke. The cycling season here is about 9 months long and I have probably ridden 7k miles since getting this phone holder. I feel like I got my money's worth even though it broke. I love the design of the one I am reordering. This one covers the finger print sensor on the back of my phone, so it works perfect for my phone. I can't switch to facial recognition because I have a bug shield on my bike helmet, which covers the top half of my face. I have a Pop Socket on the back of my phone case that fits on the holder without a problem. I am willing to pay a higher price for this one since it works better for my phone, even though I think it is overpriced.

👤I had a bar mount on my other bike. I have ridden about 100mi with this stem mount. It's great. It works great with my phone. It's easy to get the phone in and out, just practice. There is a The mount is quite secure, but the phone does move a little on the bumps. I like the new design of corners and can use a finger. This is a great bargain, works with any case, and seems like a far better solution than the "twist lock but you must use our case" option.

👤I have a mount on my phone that holds it perfectly, and I can use the tap and glance to open it, it's ready to go. The phone is held in the mount to the stem cap on my bike. I have taken a lot of bumps, drops and bunny hops.

10. OMOTON Bike Phone Mount Holder

OMOTON Bike Phone Mount Holder

The 4 stretchablestainless steel clamp arms with upgraded thickened silicone pads can grip your phone tightly and absorb vibration, just like eagles grasping things with their claws. It's flexible and durable enough to protect your phone from scratches and bumps on the road. The phone and handlebar are compatible. Most bike handlebars have a phone mount on them. The phone holder can be used with a lot of different types of bikes. It's compatible with phones with a thickness of less than 15mm. One-hand operation. It is convenient to have a phone with you on your bike. Pull down the bottom of the phone and install it in one second. The lock button on the side makes sure that the 4 corner arms hold your phone in place. The degree rotation is. The cell phone holder can be adjusted to any angle you want. The knob on the side of the phone can be adjusted to make sure the phone stays in place on the road. One-Minute Installation. It is easy to install the bike motocycle phone mount. You can adjust the number of silicone pads on the base to fit the actual diameter of the handlebar by attaching 3 2mm silicone pads in the package. This will keep the bike phone holder in place.

Brand: Omoton

👤The OB defender case fits a note. It's sturdy and fits on the bike without much movement when tightened on the handlebars and the ball mount. It takes some work to get the phone and case to fit, but once the mount is attached to the bike, it's much easier. I'm glad I was able to find one that fits my phone and case.

👤The holder was for my phone. I returned it for a couple reasons. There is a I couldn't get my handle bars to fit securely because they are not round. I didn't think it would fall off. There is a The holder rattled very loudly. The handle bars are not round so it might be because it was not secured. I was worried that I would lose my phone. There is a Two stars were due to my issues. It could work with a different phone. It was nice to try it because the return was seamless.

👤It is easy to install and use. There is a lock feature. It feels a little flimsy and comes with a few rubber shims. Don't get rid of them. I used one for a 1” bar, but had to add another because it would spin downward and I couldn't read the gps. It's a pretty good little holder. I had mine go about 80 mph. After I added the second rubber mount shim, it didn't budge.

👤My husband is going on a 300-mile cycling trip. It was easy to mount and adjust, and was a good fit for his phone. He had good access to the screen and buttons and was not worried about the phone falling out or the holder falling off. The quality and value of our OMOTON Kindle covers has impressed us, and this product is another excellent one from them.

👤The phone mount works well. The locking feature is something I like. The mount is not moving because of the vibration. It has a screw in the back to keep the phone brackets in place. The last phone mount I had was a problem with the side buttons on my phone, so I like that it does not. It should fit any phone, even if it's an Iphone, because it expands up and out when placed in the mount. Great product.

👤I am happy with this so far. I attach my StreetStrider to the arm bar so I can see how fast I am going, but I couldn't put it on the middle bar because I have a StreetStrider.

👤It works like it should. It works like it should, since it was mounted on my road glide and has over 1000 miles on it. I have an S10+ with a Otter Box defender on it and it works.

👤The phone holder was easy to use and install. The phone is locked in the holder so it can't be moved. I can't testify for mountain bikers. This product is what the doctor ordered.

👤I used it to hold my phone. It worked well. I went over rough terrain and although it did vibrate a little, it was expected. The phone was in a case and it fit well. I hope the standard stays up.

11. Visnfa Adjustable Universal Accessories Smartphones

Visnfa Adjustable Universal Accessories Smartphones

The latest design. The bicycle phone mount has an exclusive design. Installation and uninstallation of mobile phones can be achieved quickly. The simple design makes you feel different. VisnFA motorcycle phone holder is made of plastic and is shockproof. No matter what the road is like, it's stable. The rubber pads on the arm are designed to protect your phone. The bicycle phone holder has an open design that allows full access to the phone screen controls and buttons. You can use the mobile phone gps function at any time. Shoot and record your travel moments, don't block the camera. Simply tighten the mounting screws to fix the motorcycle phone mount on the handlebars. It only takes a few seconds. The quick switch to lock should be closed when the brackets are adjusted to fit the size of the phone. Leave enough space to avoid damaging the phone. This phone holder is compatible with all 3.5- to 7-inch phones. It is suitable for various types of bicycles, mountain bikes, motorcycles, shopping carts, and electric scooters.

Brand: Visnfa

👤The holder is great once installed. I didn't think the instructions were user-friendly. I installed it by messing with it. It's easy to access the controls on my phone. I made a good phone video. It's easy to access the controls on the phone and I used it to stream music while riding, which is a little risky but shows that it's safe.

👤I bought this to use on my golf push cart so I could keep my phone handy. I used a mount that used rubber bands along the top and bottom of the phone to hold it. It worked, but the rubber bands made it hard to take a picture of the local wildlife and I had to take the phone off every time. The mount makes it easy to use, just flip the cam lever and the phone slides right out, then flip it back and the phone is secure in place. Even if you don't flip the cam, the phone will stay in the mount. When you turn the dial to adjust the width of the mount, it moves very slowly and takes a lot of turns to move the mounting arms. I thought they weren't moving but they were. It's not sure how large a phone it will hold, but it's a problem to hold an Apple phone in a leather case.

👤I returned the unit because of how it was mounted. I have an odd ledge at the goose neck that caused issues and didn't provide the secure mount I wanted, plus it almost interfered with my cycle computer. I bought this to make sure I didn't get lost on unfamiliar trails. This is an ideal mount for most applications. The way the phone is secured is very secure. The angle adjustment is great. For my situation, it wasn't ideal, but I would recommend this in most applications. There is a My other observations... The dial is not easy to use and the adjustments are slow. You won't need to mess with it once you have it set for your phone. The rubber pads are for different thicknesses of handlebars. It was not easy, but it is the only way to do it. Do I need more than 2? I need 3, I can't slip it in easily, so I need to remove it and try again. You won't need to mess with it once you figure it out. I would recommend it, but I had to use a different mount method.

👤The Pro Sits is very firm on the handlebars. Even with a triple layer protective case, the clamp holds my Note 8 superbly secure. If you have a phone with a stylus pen, be sure to remove it before you go for a ride. There is a Con. The upper section has some play even with the ball being tightened. There is a Overall. Even though it has a flaw, it's a good phone mount. This product is recommended by me.

👤I wanted a simple phone holder for my bike as it is electric and I like to plot my route as well as log the speed and the time. There is a I did not have to use the rubber pieces for my setup on the 31.8 handlebar because I used the phone holder as a base. There is a If you press the size and remove the knob, you can widen the mount to fit most modern phones that are very wide. With my electric bicycle, I've gone as fast as 21 mph, and my phone stayed put, and never had an issue.

Summary

What is the best product for bicycle phone holder iphone 11?

Bicycle phone holder iphone 11 products from Caw.car Accessories. In this article about bicycle phone holder iphone 11 you can see why people choose the product. Vibrelli and Roam are also good brands to look for when you are finding bicycle phone holder iphone 11.

What are the best brands for bicycle phone holder iphone 11?

Caw.car Accessories, Vibrelli and Roam are some of the best brands that chosen by people for bicycle phone holder iphone 11. Find the detail in this article. Gub, Beam Electronics and Aonkey are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com