You can adjust the width from 50mm to 100mm to fit a cell phone. Can hold up to 7 inch phones. The Sponge protects your cell phone and the metal phone mount will hold your phone tightly on the bicycle. The Bike Phone Mount does not obscure the screen, it is perfect for large screen phones. All screen phones include the iPhone 11/iPhone 11 Pro MAX/Xr/xs, the Note10 Note9 8 7 full screen, and the S20 S10+. The viewing angle can be changed at will. The bike phone holder can be installed on the handlebars. Can be used on motorcycles, mopeds, e-bike,Folding bike,scooter, etc.
👤This product is easy to use and set up. I have it on my motorcycle. I will get another one for my quad. My phone is attached and detached in two seconds. The only problem with this item is the security feature, do you need a specialty Allen wrench to attach it to your handlebars? You can't use a standard Allen wrench to install it, you need to use their specialty Allen wrench and the one they sent me didn't work so I needed to use my grinder and drill bit to make it work I have to make sure I don't lose the Allen wrench because I may need to make adjustments once in a while. Nobody will attempt to steal this off my bike. I am sure other people have the same problem that I did. The product is perfect.
👤Thankfully my plastic phone holder failed. I decided that my next mount should be metal. I found this mount and it looks great. The mounting hardware is rock solid and was clearly designed with longevity and quality in mind. The mount lacks the rough edges and poor alignment of many items sold on Amazon. The mount appears to be designed by an engineer. The phone body is tightened with a screw mount. I secured the Note 9 while it was still in its plastic case. It was large enough to fit in the room to spare. There is a The mount comes with one side that fits all and the other side that doesn't fit around a larger tube such as the stem tube or wider handlebars. There are mounts that can accommodate a wider tube. It would be a great improvement if this mount came with one of them. There is a The phone cannot be tilted back or forward. It is locked in place and in orientation once it is tight. When the screen is throwing glare into your eyes, you can't adjust the tilt to diffuse the light. This isn't a big deal, and I would rather have a very secure phone mount. There is a I give this mount 4 stars. It would be a 5/5 with a more versatile mounting hardware.
👤I bought this one because I wanted something that wouldn't snap in half at the first wreck. This is verydurable. There are negatives to the fact that the handlebars have a round connection. I don't like the idea of keeping a Unicorn tool in my bag if it gets lost, and the Allen wrench is a special one. My phone is in the carrier and it turns the volume down while I'm in it. There is a If you have an iPhone, round handle bars, and do not mind keeping a unique tool on you for adjustments, this is a good item.
👤I bought 3 of them, one is on my motorcycle, the other is my phone, and the last one was solid and secure on my first ride. I didn't worry about my phone when I took the expressway. Highly recommend.
The back lock is made of PC material and metal and will not let your phone fall. Powerful Clamp. It does not bow down due to bumps. The tighter the grip, the greater the force. Soft Silicone is in the accent section to make sure it won't scratch your handlebars and phone. The silicone part of the handlebar clip can be used to avoid the rotation. The Pro Impact Resistance has high strength PC, Back Lock, Powerful Clips, Soft Silicone. It allows you to ride anywhere you please with bumps or jumps on your phone. The Handlebar Diameter is 0.7" and the Smart Phone Size is 4.5" to 6.8"
👤I bought this one because someone else has it. Works well for them. The mount does a good job of holding the smaller phones. The only complaint about those phones is that the screen doesn't stay with the direction you put it in. I don't intend on staring at the screen, so I didn't find it a big deal that it vibrates out of the optimal viewing angle very easily. If I had a smaller phone, I would give it a couple of stars. There is a It doesn't fit larger phones. The bottom part is at an angle. Again, it's fine for the smaller phones. A lot of the phones are not much wider than they are. The corner pieces come out at an angle, which causes them to not grip the corners. There is a bit of space in the picture. The phone in the picture is a s20 ultra. The last picture shows it all the way to one side, so you can shake the phone out of it. I have no doubt that vibrating down the road won't push it to that point. It is very easy to pull the phone out of the lock once it gets to that point. The last picture shows it barely touching the corner. It takes a slight twist of the phone to get it to come out. Would it fall on the road? Maybe, maybe not. I'm not willing to take the chance of finding out. I wanted something that held the phone in place. This isn't that. I should not be able to remove the phone from the mount. There is a The fact that I don't feel confident that my phone won't be broken on the side of the highway is a definite dealbreaker. The design needs some tweaking to be more secure. There is a The bar is very strong. It is easy to install and remove, and it can be tightened up. It's easy to put together, even though it comes needing to be assembled. If I had a smaller phone, it would probably be a decent mount.
👤It holds my phone. Especially on trips. I use it on my motorcycle. There is a The only problem is. No matter how much I tighten it. There is a The position of my phone is easy to change when I use it. There is a When I put my phone in the holder. There is a I really like it.
👤I put it on my motorcycle handle bars. It holds the phone in a tight place and the lock is good if you want to feel safe.
👤It will hold phone solid if the top corners are curved.
👤I like the fact that this device is easy to install, holds my phone securely and easy to use, and it doubles as a phone stand when not attached to my motorcycle handle bar.
👤I used this on my motorcycle, even though I didn't use the lock. It still held the phone solid.
PHONE HOLDER FOR BIKE Their bike phone holder is made out of stretchableSilicon belt and has a rotation that can be adjusted to view your phone at the most desired angle. The lightweight aluminum alloy mount is much more durable than other plastic bicycle phone holders. You don't have to worry about your phone breaking due to bumps or shocks. It's easy to install, just attach the handlebars with a screw and you're good to go! The Universal Handlebar has a size that can be adjusted to fit any handlebar size. The cell phone stands have a 180 degree rotation which allows you to use your hands free. The bike phone holder is compatible with any smart-phone with a screen size between 2.5 and 3.8 inches. The padding tape reduces the amount of vibration during the ride. Don't damage your bike or motorcycle handlebars by scratching your smart-phone. There is no risk of damage, sliding, or moving on your ride.
👤The frame is sturdy and the color matches my paint. The phone holding frame should be rubber coated to protect the glass when it is tightened. The screws are threaded backwards. The main reason I can't return it is because I drilled them out and retapped them the right way. The holders should have more cushion for heavy Harley Davidson noise. It's not practical to use foam tape for outdoor use and it's not enough to protect your phone.
👤What is the advertising thing that's useless? The unit is strong and good. The padding tape is a joke. They're gone as soon as you put them on, they don't stick to where they're supposed to be, and the padding on the phone is a big deal. They were gone in one day after I pressed the tape multiple times to make sure they stick to the unit. If you don't use a phone case, it's a problem. You know it's useless if you put something in a product.
👤The design of the bicycle mount is nice. It's in my case. The phone holder portion works as intended. It's easy to mount and configuration on a road bike with the rubberized inserts on the handlebars. The bolt is failing. The fastening comes completely loose and will not stay tight. I used this device once and it was flopping in the breeze at the 5 mile mark on my road bike. The spring loaded washer is weak and takes very little pressure to compress. The bolt would come loose in a few miles if I applied too much hand Torque. There is a If the manufacturer can come up with a resolution, I'll revise the rating. June 5th, 2020. I'm revising the rating to a 3-star as the seller has responded appropriately and issued a full refund.
👤This unit has a nice mounting bar that allows for more of a low profile placement and not something sticking straight up off the handle bar. The whole thing is very solid and metal, and it seems like it won't wear out fast with R&R. There is a I didn't bother with the poor sticker cushion tape because it's most likely to fall off anyway. I have a protective case on my phone which I would recommend if you want to protect your phone, but if you tighten the mount just enough it will stop the mount from crushing your phone like a vise. I would suggest not to tighten.
👤It is difficult to get a secure adjustment. The knob that controls the tilt and angle does not tighten enough compared to the model previously purchased for another bike, which is why I think it's not as secure. I had to take it apart and fiddle with it. It could be that the lock washer was too thin or that it was installed backwards. It is still worth keeping, but it could be a bigger issue if you intend to use it for mountain biking.
👤It was great to use it with the trainer. It only lasted about 30 miles after I took it out on the road. There is a It was good while it lasted.
There are two types of handlebars: 15-30mm and 20-40mm. It is suitable for various types of bikes, mountain bikes, motorcycles, shopping carts, and electric scooters. You only need one hand to fix the mobile phone on the bicycle rack, and then release the hand, the mobile phone will be clamped automatically. One-handed operation bicycle and motorcycle phone holder is a new experience. The bicycle mobile phone holder is made of sturdy and shockproof materials. No matter what the road is like, it's stable. It's easy to install, just need to locate and lock the nut. It's compatible with all phones with a thickness of 15mm, such as the Phone 12 Pro Max Mini Xs XR X 8 Plus 7 6s 6, the S10e S9 S8 and the Note 9.
👤Not a great phone holder. It's hard to fit with. New improvements are needed. I give this device a 2.5. Out of 5 stars. Need both handles to get cellphone on and off. It is not the best. There are issues with this cellphone bike holder.
👤The mount is very sturdy and comes with two mounting options, one with a smaller diameter and the other with a larger diameter, but with rubber strips that act as a shock absorber for bumps. The mount has a locking switch on the back that will keep your phone out of the mount. The mount is very easy to use and lets you put your phone in with a single hand, since you can push the bottom of the mount down to fit your phone in. The bumper guards on the mount protect your phone from getting damaged if the mount falls off of your bike. I am happy with my purchase, and I will use my phone for maps when I ride my bike.
👤It's difficult to get on the bike handlebars, but once on, it's very sturdy and easy to use. I would buy it again.
👤The phone fell between my feet and there was no damage. I need to replace the mount.
👤I got this for my e-bike because I was tired of stopping to reach in and out of my pocket for my phone whenever I needed it. This makes it possible. It's easier to access. There were two sizes for a universal fit. It came with rubber inserts to make it more secure. This keeps my phone safe and it stayed in place on the mountain bike trail. I think it's worth buying.
👤The product is better than the more expensive ones. The phone is locked in place.
👤Mi teléfono is un X3 Poco. Justo un buen producto. A un buen.
Easy installation. The upgrade mountain bike phone mount is easy to install. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar diameter is 1.57" (15-40mm). Wide Compatibility Universal bike cell phone stand with thickness up to 15mm, like the iPhone 13 Pro Max and the iPhone 12 Pro Max Mini Xs. The Plus 7 6s, the S10e S9 S8, the Note 9 8 and the Oneplus are some of the cell phones. The protection is shockproof. Silicone pads keep your phone from being scratched and vibrating, and this one hand operation bike phone mount comes with them. The motorcycle phone mount holds your phone. The cellphone can be adjusted to a horizontal or vertical screen. It's convenient to answer the phone, play music, and use the gps. Sturdy and safe. The motorcycle phone holder has a special shape. It keeps your cellphone out of harms way even on a bumpy road.
👤Works well! I trust my phone to be on my motorcycle. Doesn't move or shake. It is made with strong materials. I would suggest riding a Harley. I was worried that it would be too heavy, but it was built to fit in your phone and be safe. I hope this helps.
👤Over the years, I've used these holders to mount my phones to motorcycle handlebars. Security is important. I've owned several styles, the last one being a RAM X mount. The rubber bands were secured, but the clamps interfered with my volume buttons. Let's face it, the rubber bands are a pain. The Lamicall phone holder is similar to others I've owned but is more elegant. The mount is easy to slip the phone into. There is no need for rubber bands. It is possible to vary from protrait to landscape depending on one's direction of travel. It tilts so that the camera lens are protected from bugs if you are on a naked bike. I like the thing. I bought a second motorcycle so I don't have to swap. It's big enough for an iPhone 12 Pro Max.
👤Stay away from this model. There were two pieces out of the box. The unit is not designed correctly. The ball must be tightened to hold it together. I would not have gotten the ball into the sockets with the tightened nut if I had not owned a vice. The lock nut could not be threaded once the sockets were seated because the threads were not aligned. I use this model on my motorcycle. The phone can slip in the top lock even when it's locked. The Lifeproof case cracked when the unit shook so much. I'm still looking for a phone holder. Don't buy it.
👤It was thrown on a rally. It didn't shake on me once after an hour trip. I can still see the dash if I put a 12 PlusMax in this thing.
👤I dropped my phone while on the trails because I had wasted money on cheaper products. Other products are made of plastic and I have found replacements that don't last. The Lamicall holder is flexible and sturdy. I can switch between my motorcycle and mountain bike. The metal bolt on the clamp creates grip on the handlebars. The springs hold the phone in place and the holder rotates to allow for flexibility. It has padding on the edges of the phone to protect it from debris. Overall very satisfied with the product and price.
👤I used this for my 09 super glide needles and I love it! Even with the sound of a motorcycle. The design is very sturdy. If I need another down the road, I will definitely buy again. I have an otter box with an Apple device. It is easy to get it out. It is my otter box. I have no complaints.
👤The build quality here would never hold up to a motorcycle. The mounting system for a motorbike is made with plastic and steel that feels brittle, and it would break if it were damaged by the speed, bumps, and vibrations of a motorbike. The mounts are bound to wear out over time. The lock doesn't seem to do much to keep your phone in place when you're off-roading. If you want to use this on a street bicycle, then hell. Yes! It will do.
SECURELY & FULL PROTECTION. The bike phone mount has 4 corner claws and a rubber pad to hold the phone in place. They use a screw nut for easy installation and ensure cell phone stays securely to your bike even on a bumpy rocky road, it's good for both mountain and road bike. Super stable and safe! When you put your phone on and press the centertrigger, the 4-corner arms shrink and catch it. When you want to take off the phone, press release bars are a good option. One hand operation is easy to use. Real hands free! The degree of rotation is not a BUTTON BLOCK. Four corners will not block the buttons and touch controls of smart phones, especially for the iPhone 12 / 11 Xs Max. Xs/ XR The Face ID, Touch ID will not be blocked by X. You can adjust your phone to any angle during riding, great for maps, navigation, recording or music. The bicycle phone mount can securely hold all smart phones with screen sizes from 4.7” to 7” and thickness less than 12mm, including the Xs Max/Xs. If you have a round bar, you can use the bike phone holder to fix your phone on a stroller, treadmill, shopping cart, golfing cart, or any other place. If you don't like the bicycle phone mount, just contact them and they will replace it for free.
👤I don't leave reviews very often. There is a If anyone else was looking, I would highly suggest giving this a try. I use it as a replacement for a holder on a Harley Davidson V-ROD. The colors match. The old one kept turning on the bar even after I tightened it. I went far and it snapped. There is a This doesn't involve any tools, just a simple turn knob. I put a rubber lining on the metal to keep it from turning. It probably isn't necessary. There is a The phone holder is about the size of a deck of cards and large enough to hold my giant iPhone with a large Life Proof case. It is easy to put in and take out. I looked at many cases. It was difficult in one aspect or another. There is a Everything about this was simple. There is a I trust it now that I've used it. I want to let anyone else who is looking for an easy to install, use, and hold product give this a try. It's only fourteen dollars. You can't ask for more. There is a This is not rated very high. Great find.
👤I was happy for the first few rides. It was easy to use and install, but it did rattle over rough surfaces. I learned today that I made an $800 mistake by using this mount. I hit a sharp bump while riding at moderate speed and the phone flew out of the mount, smashing on the pavement. I need a new phone. I would use a mounting system that grips the phone more securely in the future. If you plan to ride on anything other than smooth pavement, the built in spring tension is not enough. This product is not for you if you plan to ride over bumps.
👤It is easy to get the phone in and out of this mount, it is just one hand. It doesn't seem to be very durable. The mount doesn't seem to hold very tight on the bars, but it's not bad for the price. When there is no phone in it, it makes a lot of noise. It's not a good idea to go down the road with empty plastic rattles. It makes noise with a phone, but nothing quite like it does empty.
👤The mine is still working well after 2 years of use. My teenage son doesn't use his anymore because he takes bumps more than I do and dumps his bike once or twice, and this mount won't hold up to that kind of use, it can fly off with the phone in it, if you hit a hard enough bump. I've only used it for a couple of rides that weren't rough, so I can't really rate its strength yet. It's very easy to install and adjust a secure grip on my phone. The only thing that is inconvenient so far is that if you have a phone with a fingerprint sensor on the back, you can't access it while the phone is mounted on the bike.
The bicycle phone holder has 4 clips that can be stably fixed to the phone. 4 wear-resisting corner claws with inside non-slip PU pad effectively prevent your phone from scratches. The button in the middle can be locked with a single key and the phone wrapped tightly. The holder is double-protection and catches your phone firmly. Full access design allows complete access to phone screen control without blocking Face ID or fingerprints. You can record your video or easily open it. To release your phone, one hand must be held by the side arm. It's more convenient to take your phone with you on a bike. It can be charged at any time, listen to music, and ride. The bike phone mount has a rotation design that allows you to adjust the display to the most convenient location. The perfect bike and motorcycle phone holder gives you a good view of your navigation. ANVAVA bike phone mounts are designed for handlebars. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, spin bike. The handlebar diameter is 0.67 and it's 1.25". Universal bicycle mobile phone holder bicycle is compatible with all mobile phones of 4.5-7.3 inches. Smart phones with screen sizes from 4.5 to 7.3 are available.
👤I'm on a trail. It doesn't shift.
Pull down the bike mount with one hand and insert the phone into the holder in 1 second. Enjoy a locked/released experience. The ball joint technology allows you to fully adjust and stay in the direction you want. Their bicycle mount doesn't obscure the buttons or the headphones. It's convenient for playing music, face ID and exchanging apps. The mount on the handle bar is easy. The clip works with various handlebars, like spin bikes, motorcycles, e-scooters, and road bikes. The rubber on the handlebars is used to keep it firm. The holding mechanism of the iPhone bike holder has a retractable arm and 4 Silicone pads to make the phone stable and safe. The cellphone holder can be adjusted to fit in terms of your phone size/shape. It's compatible with phones with a thickness up to 15mm, such as the iPhone 13 12 11 Pro Max Xs.
👤Man ist die Schballe un den Lenker machen und ist die Schraube anziehen. Dadurch ist die Halterung. Es ist hierfr aus, wie das Handy in die Halterung bei uns ist. Durch die Gummibeschichtung in den Ecken ist das gemeinsamen Halt.
👤Es ist ja massenhaft verschiedene Handyhalterungen. I am gleichen. Preisbereich liegen. Ich ist die Auswahl, sonderlich leicht. Im glcksgriff gemacht ist. The Montage ist die schnell erledigt. Die Halterung ist bei bomben fest fixieren. The Beste ist. jedoch Einklinken das handys. Beide ist in the hand. Man ist die leider geklaut. It is schaube fest ziehen. Ihren Feder in position gehalten, ist das Handy. There is a Ihn doch wegen Diebstahlgefahr, das ist. Problemlos mglich ist. Sollte der Halter doch. Ihn aber mal.
👤There is aninfache Montage. In der Halterung, sitzt, ist das fest. Man bedenklos das handy. There is a Ich ist bin. Man besseres Gefhl, wen es lediglich 2 wren.
👤Ich ist, damit, mein Navi, benutzen. Die Halterung macht bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, bei uns, be The Halterung ist an das Lenkrad und der Mechanismus. Bin jeden fall.
👤It's simple and cool to have because sometimes we forget our track and device and it can be hard to reach our destination. The quality and features of this product are really nice. It was an amazing experience.
We mean out and out universal, which means mount any phone to any bike or motorcycle with tubular handlebars. The holder can fit any device up to 3.7" wide and all handlebars from 0.6" to 1.4" in diameter. There are no tools required for installation. AJUSTABLE GRIP. You can adjust and secure your phone to any angle and position you please with the special ball and brackets. The clip has extra secure and soapyabsorbent that is firmly and securely held. The band wraps around four corners of a cellphone. Make your most extreme race to make the phone fall out, be sure it won't! While your device is mounted, you have full phone access. You can use your phone for music. You don't need to unmount your phone or ipod. You should keep your hands on the handlebars. 100 to be safe! If you don't love your new bike phone mount, just contact them and they will make it right.
👤I was involved in a hit and run with a Semi Truck who was running a red light. I broke more than two dozen bones when my bike flipped and I believe the phone had no damage when I brought it to me. There is a I believe the device did its job. There is a He was carrying railroad ties.
👤If you're expecting RAM mount quality, you're going to be disappointed. I have a backup mount on my motorcycle. It works well. It's very easy to install. It's about 5 to $8 overpriced. For what you get, $20 seems a little high. I paid $60 for my RAM mount. When I put my phone in the RAM mount holder, I don't look down to make sure it's secure, like I do with this one. If you have more money, get the RAM mount.
👤I ride a hybrid bike for exercise and for fun. My wife wanted me to get a gps system that would let me know my location and she wanted me to press a button to alert the emergency services. I found this device that held my cell phone in place and only 2 feet away from my voice. I bought and rode in a field a few days later. I found the only hole and dumped the bike. A gash on my leg caused the dirt to be wiped off my ride. The phone never moved. This device is all they have to say. The cell is held firmly.
👤I used this mount to hold my phone while biking, it was only a year old. The terrain was mostly bike paths and roads. The mount broke off at the area where the stem connects with the base. The phone fell down and hit the spokes, causing the wheel to stop. If it weren't for my helmet, I could have suffered serious injuries when I was thrown from the bike. I had many injuries, including a few fractured bones. I thought the ball and brackets must have loosened, or something happened with the bar. The stem snapped away from the base of the clamp. The phone was not heavy and the straps were still intact. The stem snapped. The phone was seated correctly, the holder was installed correctly, and there was no human error involved. I am angry about this and would recommend you to consider my experience before purchasing. Again, my rides are not at all rugged or extreme, and there was nothing unusual or out of the ordinary with this particular ride. I was in the emergency room and I am thankful that it wasn't worse. I would give the product zero stars.
👤I bought this because I misplace my phone mount. When I am not actually looking for it, I expect to find an inexpensive replacement option. This mount works great. I don't know if I'll put my other mount back on. It is very sturdy. My phone did not vibrate very much in this mount, despite the fact that it vibrates with a Harley. I use a large protective case over the Note 5 and it has no issues fitting inside. The securing straps are a nice feature, but I don't think it would hold the phone well without them. It came with an extra set of straps in case they broke. They might get weaker with exposure to the sun. I would recommend this mount to anyone who is looking for an inexpensive mount. Well done!
There is a bike phone holder. The upgrade bicycle phone mount allows you to remove the phone without having to disassemble the entire bike stand, making it easy to send and receive emails or texts, answer calls, take selfies, and more. The perfect companion for a bike ride. The phone holder is made of tough and stretchy silicone bands and can be stretched to fit all phones. Pro 12 Pro Max/12 mini, Pro 11 Pro Max/X/Xs/Xs Max/Xr, Pro 12 Pro Max/X/Xs/Xr, Pro 12 Pro Max/X/Xs/Xr, Pro 12 Pro Max/X/X The Universal Handlebar Phone Mount is suitable for all 20-45mm handlebars. The built-in Silicone Pad will firmly grip your handlebars, no matter what the terrain, and it's also easy to remove. Full Screen Friendly and rotation. The curved silicone bands that never block the face ID, light sensor, home button, and finger sensor are suitable for all screens. A cell phone holder that rotates allows you to see the phone at a different angle. VUP Bike Phone Stand 8000 stretching lifespans with high-quality silicone materials to secure the functional reliability of the phone mount for years. Please let them know if you have a problem with the product.
👤I didn't want to test this phone holder at the extremes, but after I was hit by a car on my bike, my phone was still in the holder and undamaged. I already did it for you, so don't test it in this way.
👤I bought this for my motorcycle because my handlebars didn't have enough room to hold the mount. I thought it would fit between the brake and the handlebars on my Harley because it had a thin rubber clasp with a twist drive to tighten. I rode to 1800 miles with this thing attached, it doesn't move, and the screen stays in place. If I had to take the phone with me on the bike, it was easy to push down and twist the phone's release. This product is very well built and inexpensive, would highly recommend it.
👤The pull through strap and knob tightener is easy to install. It's not easy to attach a phone holder to a mount, you have to get used to the way it works and make sure you line it up correctly. The strap system holds the phone in the holder. It is very secure because you have to pull the straps around the corners of the phone. There is a The ability to remove the phone holder from the phone and take a picture is a great feature. There is a The phone is held to the handlebars by this thing. I did some rough mountain trails and it worked out without a hitch. Highly recommended.
👤I use it to find trail maps on my mountain bike. There is a The ability to remove the phone from the holder was important. I wanted a way to quickly remove the phone from its holder without disrupting the setup. There is a You can set the snugness of the holder to the amount you need so the phone doesn't bounce around on bumps excessively, and is held securely, if you turn a knob. There is a The low profile of the holder keeps the phone from getting bumped. It's better than I thought it would be. It's a no-brainer for the price.
👤This is the phone mount to get if you don't want to pay $60 for the Quad Lock. When I ride over rocky terrain, I add a star because of theVersatility of this mount, but I subtract a star because of my 7plus phone rattles. I love that I can remove my phone while on the go. It will detach on its own.
👤I bought this because I was tired of fumbling for my phone while cycling. The product did a good job, but the elastic that held my phone wasn't great. The elastic snapped at the precise moment I rode over the speedbump. My phone fell down and cracked. There is a So would I recommend something? No. It's not worth the cost to fix my phone glass if it had broken.
👤The bike phone holder is five stars from me, although it was a little tricky to mount on the handle bar, the trick is to press as hard as possible to make the tip of the band sit just right. It works great for my road bike and I don't remove the case from my phone as it is slim enough and the rubber/Silicone holder grips it just right.
The bike phone mount was made of metal and plastic, and it was easy to use. You can adjust your phone to any angle that suits you when you are riding. The design of their bike phone mount will allow you to access all the buttons easily. The bike phone holder can be upgraded to a Detachable one. You can take your phone from the bike with a rotating phone holder. Silicone can absorb some vibration, which is different from plastic mount. The bicycle phone holder can hold a phone. The soft silicone holder won't cause any damage to your cellphone. Wide Compatibility: Universal Bike, Stroller, Grocery Cart, Wheelchair, Treadmill, Motorcycle, Handlebar. It is made of high quality elastic silicone. It is possible to fit many cell phones between the screen size. 0”-7. 5”). It's compatible with the following devices: iPhone 12/11 Pro Max/XS max/XS/XR/X/8 Plus/7/7 Plus/6, S20/S10/S9 Plus/S8/S8 Plus/S7/Note 8, and more. You get a bike phone mount.
👤It was bought for my mountain bike. Does the job well, but tends to slip on the handle bars. If you want to open the phone up, you have to remove the phone straps from the bottom of the phone. It's okay for the value. I would consider another holder.
👤I like this, but it doesn't seem very solid to me. It is very tight and the rubber stretches and wraps your phone, but it has not given any indication that it is going to fail yet. There is a The band that wraps around the handlebars can hold but can be easily pulled over on rough roads. It is easy to move from my road bike to my mountain bike. There is a I am not sure if it will work or not, but I am sure it will work.
👤It works great. I have a case on my phone that is so small I didn't think it would fit. It's very stretched! It is probably 5 times its size. My phone stays put with no problems. I can answer calls while on my bike.
👤The rubber on the bottom of the phone makes it difficult to open the screen with a single finger. It would be better if it went over the corners, but I think it is fine for other phones.
👤I lent it to my husband when he was leading a backroads ride after buying this for my bike. It has been many months since he gave it back. He uses an iPhone 12 mini and I use an Apple phone. It doesn't protect the phone from the rain, which is unfortunate if it starts raining. The mount makes it easy to check the gps on my bike because the phone screen isn't very responsive under the bag.
👤I have a normal size phone, the S20. It's difficult to get into the webbing. Doesn't mount securely to the handlebars. Move on to something else.
👤I used to have one that was attached to a thumb screw. It was solid. I wiped it out because it was so solid. This one has a rubber strap. It's easy. The bolt on kind doesn't bother me because you get a little more wiggle. It's worth it because of the ease of swap out between my mountain bike and road bike, and if I wiped out on it, it probably wouldn't snap.
👤I use it on my golf cart. The handle of my folding push cart is not compatible with the one I have for a riding cart. The bands hold the phone very sturdy and the holder is easy to attach to. I'm not afraid of it falling off when I walk the golf course or when I put my scores on the board. Highly recommended.
Bicycle phone holder handlebar iphone products from Gub. In this article about bicycle phone holder handlebar iphone you can see why people choose the product. Joyroom and Ralos are also good brands to look for when you are finding bicycle phone holder handlebar iphone.
Gub, Joyroom and Ralos are some of the best brands that chosen by people for bicycle phone holder handlebar iphone. Find the detail in this article. Visnfa, Lamicall and Sunby Asunby are also brands that their products are worth to check.