The handlebars have a diameter of 25.4mm. Please confirm your bike's diameter before you place your order. The item isn't suitable for your bike. The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle. The installation is easy because the specifications are accurate. There is a degree of angle indicator on the adjacent parts. You can see where the handle bar is positioned with the opening on the stem. This is a nice riser. The thickness of your handlebars may affect the installation of a shim. If the threads loosen up, be sure to use glue on them. The original setup in the shoulders, arms, and back had to be corrected to achieve a more comfortable riding position. The stem and riser handlebar allow you to sit upright on the bike, which is better for your back.
👤Went with this stem because of the reviews on the internet. It was on time and there was no damage. The stem is very strong. It looks like a piece of equipment from an original equipment manufacturer. I threw away the instructions and proceeded to install the stem backwards, since there is a degree of angle indicator on the adjacent parts. Loctite was used on all the parts. It has about 400 miles on it and everything is holding up. My Cannondale Quick 1 hybrid was raised to the perfect height. As I raised the bar, I had to change my attachment points downward. Allen head bolts are used so no phillips heads are used here. One suggestion would be to put a small line in the center of your handle bar so you can keep it centered as you install. You can see where the handle bar is positioned with the opening on the stem.
👤This was installed very quickly with a 4mm and 5mm wrench. You can see from my photos that it raised my handlebars up and pulled them closer to me, about an inch in each direction. My old stem was too long and too low for my comfort, and it set my drop handlebars too long and too low. Riding put a lot of pressure on my wrists and heels and it was also causing pain in my shoulders when I rode. The solution to that problem! The piece is strong. It's very stable because of good quality and construction, and because the screws are tightened down properly. I don't think it would detach from the bike. If you need to raise your handlebars, it's highly recommended.
👤I ordered it for use on my bike. After receiving this, I learned that the stems on mountain bikes shouldn't be adjusted. Put it on my wife's bike. The part looks good. It is easy to install. I would suggest that those who don't carry pocket wrenches do so when they have this installed. There is a chance that a bolt can loosen. Wouldn't want that to happen on the road. I have nothing but good things to say about this part and most bikes. I think mountain bikes are not a good addition due to the risks and rough trail impacts.
👤If you've never worked on a bike stem before, you should look at the stem spacers advertised in Amazon's "you may also want..." section. If you find that the riser extender's base isn't as tall as the one you're replacing, you'll need some 1-1/8" aluminum spacers to tighten your stem back up. Now is the time to order 'em. I'm waiting for Amazon shipment #2 to arrive. I have not used the riser extender, but it feels solid. If I don't experience anything else than joy, I will update this review.
👤I like to be as aerodynamic as possible on my main road bike, but my geometry is different on my commuter bike, so I need to change. It made a world of difference when this was added. A heavy backpack makes the ride much more comfortable. I can adjust and change the angle. Make sure you have enough play in your cables for the change, or you may need to rerun some cables. I had to reduce how high I increased the angle, but it still made a big difference. I'll just run it at the current angle until the next time I need to change the cables. The part is so good that you don't need to get one with another angle.
Their heat pack is ready for more if you use it more than once. They designed every detail to stand up to repeated use and provide you with consistent muscle pain relief. It was sunny. The Bay Microwavable Neck heating Pad is for hot or cold muscle therapy. The size is 5 x 26. Filled with all natural grain for the best heat retention. Only a spot clean. The weight is 2.5 lbs. The bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions. The road brake pad is 50mm in length and easy to remove and install with the tool. V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel and improve braking ability. The versatile c brake pads are good for most road brake bikes, each pair has left and right part, without front and rear, and each piece has a text mark. The package includes 2 pairs of road brake pads with a tool, and comes with a lightweight tool for easy installation.
👤The rubber pads on the brakes do not have enough grip to stop the bike. The brakes were hard to grip and stop the bike.
👤I've been very pleased with the purchase. The pads seem to last a long time as I've been on many hilly rides and they have very little visible wear. Many of the comments seem to be related to the installation of the pads. They are marked well. I had no issues with installation. Try to picture the wheels turning in a certain direction, and install the pads so the chevrons are facing against the spin direction. If the wheel is spinning to the left, you should know the stripes to the right. Where --- indicates the direction of the wheel spin, it's called > > > ---. There is a I will definitely be purchasing them for my other bikes as their pads need replacements.
👤The products look good and work well in less than 1000 miles. There is a They barely show any wear, but I started to feel metal to metal contact. The metal pins were visible on the surface of the pads. Not sure if it is a mistake in design or manufacturing. It's become a really bad deal for me.
👤After sitting in a barn for 30 years, the Schwinn super le tour originally had the salmon colored brakes, but they were hard as bricks. The reviews for reproduction pads were bad, I didn't know what kind to order for a vintage bike. I ordered these because they are easy to install and stop the bike better than the old timey ones. They are a little bigger and easier to install.
👤I bought these pads to replace the ones on the boy's bike. They installed easily and seemed to be nice. They had little to stop power after testing the brakes. They didn't work very well, no matter how hard you tried. I'm skilled at bike maintenance and repair, and I verified that everything was aligned correctly, and there were no issues with the cables. I degreased the rims in case there was some sort of oil on them. Nothing seemed to improve the operation. There is some sort of grease preventing these pads from stopping. You can feel the push back in the hand brake lever, but you don't stop very well. There is a The other build quality aspects of these pads seem to be good, as I might have gotten a set of pads with a bad amount of rubber in them. They don't work when you ask them to do what you need them to do, and that causes the wheels of the bike to spin.
👤I replaced the brakes on the boy's bike with these. I cleaned the rims as part of the install. I had to dig a real one out of my tool box after I found the low quality tool stripped at the corners. These things were installed with clean rims and had little stopping power, which could be a safety risk. They do a better job with the owner as he weighs less than I do, but it is still a gradual slow down rather than a stop. I told the Dad that I would look for something made with higher grade rubber that was softer and grippier for safety reasons.
The chic black bike seat pad is sure to upgrade any lowly steed. A treat for you and your derriere! ThICK SOFT GEL PADS BIKE RIDE. If your saddle is not adequately padded, you should cover it with a seat cushion. It helps absorb the shock by making contact with the sit-bone. Enjoy those miles, burn calories and have fun. Get ready for a more enjoyable outdoor cycling experience. Use their seat cover at Spin Class, Stationary Bike or for outdoor cycling. Please make sure you fit your bike seat before purchasing it. This is not suitable for wide bike seats, use for narrow bike seat width is between 5.9 and 6.5 inch. Premium quality is soft and supple on the outside, designed to feel like part of your bike seat. The best out of your ride can be made with a combination of memory foam and silicone gel layers. The fabric on top dries quickly and does not stain. The center cutout has mesh. INSTALLATION IS A BREEZE. It's a good idea to take it on and off in a few seconds when you leave your bike outside. The Gel Seat is made from strong cross over VELCRO straps. The anti slip layer is on your saddle. There is no hassle with rope and strings. It is quicker to install than any other seat cover. They want you to love their bike seat covers, so they are giving you a money back guarantee. If you don't like your bicycle seat cover, they will give you a 6 months money back guarantee. If your bike seat gel cover doesn't make you feel better, please contact them and they will give you a refund. Improve cycling with a comfortable seat cushion. You can add to cart and get yours today. Measure your seat before ordering.
👤The gel seat cover is great. It fit perfectly on my seat. I no longer have a sore bum and I can ride in comfort.
👤I wanted to give a review for the big butt girls that ride bikes. This seat is amazing. I feel like I am sitting on gel while I ride because of the nice padding. It can start to get numb on a hard seat if you have a bigger butt. It's easy to install.
👤I put this on my Peloton and it held up well for a 60 min ride in the saddle. The Bum feels great. It is very comfortable for me and my husband, and it fits perfectly. It is a bit more firm than my previous gel seat and I was worried I might not like it as much, but it actually feels more comfortable than my previous one. Very happy with this. If they decide to stop carrying it, they might get a second one.
👤The padded slip-on seat cover is great for people with a slim seat. Not designed for a large seat. I would have bought this on the day I bought my bike. The mountain bike seat made me walk like a cowboy. The padded cover has made riding more enjoyable and less awkward after a day of riding. There is a The cover slips on easily over the seat and the straps under it hold it in place, with no slipping once positioned securely. I highly recommend this product.
👤The description says it will work, so I bought this for my spin class. I took it to my spin class and it wouldn't fit. It seems dangerous. I was hoping this would work for me. The description said it would work, but I can't return it. There is a There is an update. Their customer service is excellent. They were worried that I couldn't use it. The solution was arranged to my satisfaction. Don't hesitate to buy from them.
👤It makes people feel better. It is easy to put on and does not shift around at all. I don't take the cushion off often, but it may be different for someone who takes it to the gym and needs to always take it off. There is a It comes with a slip on cover to protect it from the elements. The strap doesn't make sense to me. I don't see the way it's supposed to be because the velcro is on the wrong side. I took off one star because of that. I can twist it to go behind the seat, but not under it. The seat is snug without the straps so it's not a big deal.
👤I have a seat that is small. I am very pleased that it seems to be better than the tie-on type. It was very difficult to get it on in my case. Take note of the pockets in the back of the seat. These are not easy to start with. The side straps can't hurt the stability. My seat is narrow and hard to pull over. It's a good thing that I won't remove it often. If you plan to use it to go to the gym, be aware of fit issues. It may work well on a small seat. It is a 5-star for me.
Bed Buddy is a leading manufacturer of heating pads for back pain. Bed Buddy can help you with neck pain relief or simply therapeutic relief from muscle pain. Distribute weight and relieve pressure on your neck, shouder or hips will reduce the risk of injury. Advanced material ensures the pad won't shift or roll around from the bar, designed for upmost comfort. The barbell pad has a high grip surface, perfect for exercises like squats, lunges and hip thrusts. The portable design is perfect for carrying gym bags without being heavy. It is easy to install and remove, but fastened during workouts. At Power Guidance, they stand behind their products. If you don't like their products, please don't hesitate to contact them, and they will do their best to make sure you are satisfied again.
👤I like this barbell pad. I use it at the gym for hip thrusts. I use my traps for squats. It's great for hip thrusts. I don't mind the straps that came with it. I can pop it on the Olympic bar with the opening facing up, and it stays on. It gives the perfect amount of protection to your body without making you too large. It works well in my gym bag. I was too cheap and lazy to buy a proper barbell pad, so I used a yoga pad. I bought this one after breaking down. I like the all black color and the simple branding. Power Guidance is not as bad as the ones that say "Perfect peach" or something.
👤I am an ACSM certified personal trainer and I give this product my stamp of approval. I don't use this pad for squats. I use the padding for hip-thrusts because it is so thick and soft. It gives the perfect amount of padding on the bar, so I don't get hurt.
👤This product is not noteworthy for my needs, but it may fit the bill for someone with an Olympic bar. It isn't suitable for a standard bar. The bar cradle is too large for my standard bar. The pads are held on the bar by the straps. The pad slid, spun and moved, but it stayed on the bar. The use of the straps makes it hard for the person to sleep. I ordered a second pad that was advertised to fit both standard and Olympic bars. The replacement pad has a slightly smaller grooves which gives it more security and the ability to take on and off without being noticed.
👤If it had attached closure straps instead of the separate ones, it would be the only change I would make. I like the added comfort for Hip Thrusts over the thinner ones I have used in the past but having two separate straps to use to hold it tight around the bar is too much hassle to dig through my gym bag and find. I use it without the straps. I have to pick it up off the floor between sets since it stretches out too big to stay on its own. It is amazing. The bar rests on the shoulders to not be too thick at the neck, but also provides enough cushion on the hip bones to use it for heavy Hip Thrusts, which is why it works well for both exercises. I have been using it for a long time and it has held up well and has been very durable.
👤I admit that sometimes I feel like a princess when I walk into the gym with this, but hey, it works. The gym is gross. It's flimsy and has a strand of hair that has been used before. I feel like I can do more reps with this pad and the bar is not touching my body. The gym rats can think what they want while I get in shape.
Delta products ensure a more enjoyable ride. Delta is the brand you can trust with the best customer support in the U.S. All quill style forks are converted to use threadless stems. It converts 1 inch to 1-1/8" threadless.
👤This is a good-looking aluminum accessory that can be used to mount a newer style stem on a bike with an older steering tube. There are two things to pay attention to. Many buyers seem surprised that you are buying the right size. When your bike has a 1 inch steering tube, the shaft that fits inside the stem will be thinner. If your old stem is less than 2mm thick, this is the correct accessory for you. You may not be able to see the tube on many bikes because your steerer is measured on its outside. The steerer is not 1 if the shaft of the old stem is thicker than 2mm. The thicker top part of the shaft is where the new stem should be mounted. The stems that are taken are 1 1/8"/28.8mm, a common size. 2. The top cap on this one is wider than the opening in your stem. You can't mount the stem on the bike and then on the adapter. You'll need to assemble the adapter and stem, then put the combined unit into the steering tube. A cap that covers the joint between the stem and the adapter is the payoff for your efforts. It will likely keep water out of your assembly.
👤The part installs into a tube that's 22.2mm in diameter to convert your old style handlebar stem to a modern one. The expanding style stems of older mountain bikes limit your configurations and options for changing your bike around to fit you better or just to use modern components since there are far more options now. Make sure you have a tube on your bike. If you want to avoid a delay, measure it. I converted two of my vintage bikes with these stem conversion tools. With so many options on the market, prices are great and you can replace those aging, ugly stems or make that old bike fit better- in my case, I needed to raise the bars since I'm getting a bit older and need a more upright riding position. There is a I replaced the rusty Ritchey stem with a new one and it cost more than a new stem conversion, new handlebars and a new stem. The marketing hype they use to try to sell new bikes is more hype than benefits to the average rider. You can buy a used bike for $300 and ride it in style. It's a good thing.
👤Bike stems are not normal. The OD of most 1" stems is 22.2. There is a The stem is actually 25.4. Some of the other reviews had pictures of stems that arrived from this item, so I ordered this one. I bought this to use on my old bike. The stem is marked OD 22.2. I was really hopeful that the reviewers had posted pictures of a 25.4mm OD. There is a I can use the stem I received as a replacement for a 1" quill stem. The seller should add metric description and pictures to the item. It is easier to verify a 25.4 OD stem for your bike than it is to measure it. It looks like a well made part. I'll keep it for an old bike that needs an accessory.
Premium protection. Premium padding is used to make the Fox tailgate cover the best protection out there. Throw it on to protect your bikes and pickup. You can access your gear. This cover has a flap that you can use to access your truck and tailgate. You don't have to take off the cover when you need to get to your gear. Load up your tailgate cover and go. SIZING: Most trucks have a tailgate cover. The small can carry up to five bikes and fits most compact and mid-sized trucks. The large tailgate cover can hold up to six bikes and fits most full size trucks. Don't use old, insufficient methods to get your bike up the mountain! The tailgate cover for Fox Racing features the famous Fox Head logo. Do it in style and protect your truck from damage. Fox racing Fox is the innovation leader in the motocross industry by designing and producing motocross gear and apparel for the world's best riders.
👤The large F-150 has a tailgate step. The straps are easy to use. If I fold the flap inward and adjust the pad, I'm still able to use the backup camera below the ford emblem. It looks like I can close and lock my truck with the pad still over the t-gate.
👤I don't write reviews but I recommend this, I got the smaller and it fit perfect. It's easy to use and it's cool.
👤We've been abusing ours for a while now. Good construction. Looks great. The bikes are secured well. If you don't stick the bike loops back together, they will come out.
👤It's perfect for a 2011 FORD F250. The back up camera can still be used if the latch cover is tucked. The tag ends of the straps that loop around the tailgate need to be rethought. The stiffening of the end might help feed through the tailgate and make it easier to install and remove. The loops should be secured permanently because they randomly fall out. Otherwise perfect fit and finish, very good quality and looks better than the competitors, and offers plenty of protection for your bikes and trucks.
👤Really? The bikes were on in less than 10 minutes. 5 bikes were loaded and unloaded at least 15 times in two weeks and traveled over 1200 miles with no damage to bikes, tailgate or tailgate pad. The tailgate has three straps wrapped around it. Fast shipping and easy installation is what the product is great for. Fox!
👤This bike pad is perfect for my tailgate. It is easy to install after a few times. The tailgate flap is large enough to hold most trucks. The only thing that needed to be changed was the straps on the bike's pads, which are not long enough to go around my newest bike. The frame is fat and a lot of bikes are starting to go that way. If you have a bike with a thick frame, you can replace the straps with longer ones. You can remove the straps by sliding them out of the slot they feed through. I will update when I find a strap that works. There is a I'm going to order the stock straps, they're 12 x 1 and are from VELCRO. Once installed, I'll update. The tailgate pads are cheaper, but this pad still gets a 5 star rating. There was an update on 11/14-21. The straps I bought fit my bike frame just right. If you have a bigger frame, it's easy to fix.
👤It was a perfect fit on my F-150. It was easy to load the bikes and take it off. The bikes can be secured with the loops. It does what I was looking for.
👤The 2016 F-150 is in good shape. It protects the gate and keeps 6 bikes secure. You can flip the handle cover under the pad and still have complete coverage from the back-up camera. It is good because it provides 100% coverage, and it is the only complaint I have. The tailgate won't shut if the pads shift to the left or right. A real problem is not a big deal. I gave 4-stars because it does everything it says it does, but I don't think it's perfect. The straps are not attached. I wish the cover on the straps that go under the tailgate was a little longer. There are no regrets. It's the best bang for your buck and it will protect both your bikes and your truck.
The stem is black and has a rating of 0-60 degrees. For 1-inch fork steerers, the shaft diameter is 22.2mm. 180mm quill shaft. The handlebars have a diameter of 25.4mm.
👤I like this stem. I was looking for a way to convert to a more upright riding position and this is what I found. Let me clear up the confusion about the dimensions. The stem is 1 inch in diameter or 25.4mm. The pivot point is described by the length of the part that has the handle bar. The 60 degrees they refer to is 1/3rds of the distance from the lower portion to the upper portion, which is not doable. The thickest point of the handlebar is measured in the middle. You can choose between the 90mm portion or the 110mm portion. I chose the 90mm one because it's maximum 60 degree extension would not allow it to be as far forward as the longer one. It looks professional, unlike the original which had welds. See photos of the setting.
👤The low profile of the handlebars gave me lower back pain when cruising, even though I loved my bike with dropbars. So... I might be the first ever cruise racer. When I want to dig in, I can grab the lower part of the bar and kick it. Exactly what I needed. I recommend this stem for anyone who needs to adjust the bar's height.
👤I picked up a free Trek 700 in 1997 or 1998. The steering was not high enough for my liking and I found a stem that fit like a glove. If you're worried about it being too high, just get this one and lower it if you need to, and adjust the handle bars closer to you. You have a lot of adjusting to do. If I wanted, I could go higher, but I would need longer cables. I like it a lot. There is a The only negative is that you can't check the tightness of the main bolt once the stem is up. I don't think it's a big deal. I check all this stuff once or twice a year so it will be a little more work, but it's fine. I'm not sure if you can loosen the horizontal bolt, it's just a black cap. It feels like metal, not sure if it comes off. I will have to look into it more. There is a If you press hard from one side to the other, it seems to have a little wobble. This is fine for most bikes. I like a tight handlebar. The horizontal pivot area is just a large pin. It seems strong.
👤Most bikes in big box stores are of an old design styled for road racing or BMX racing. Unless you go to an old style single speed or three speed, there wasn't much alternative. I'm starting to wonder how I could raise my handlebars and move them back to improve my posture and take the weight off my hands. This is very sturdy and I was able to take the other one out. The top knuckle is adjusted.
👤I bought this stem to solve a problem. The stem on the bike was labeled "Ride Right Comfort System." The tilt angle is held in place by an internal plastic/rubber bushing. This might have been a shock absorbing system for the handlebar, but after many years, the bushing dries out and the handlebar falls forward easily if given pressure. Replacing the stem is the only solution since parts are no longer available. The position of the handlebars was the same, even though this Sunlite stem looked a bit longer. It is a "pop top" so that you don't have to remove a grip, shifter and brake lever in order to install it. The old stem did not have this feature, so I used a Dremel with a cutoff wheel to cut through the mount on the old stem, then popped it off. This is the best way to get one of the tight rubber grips off of the handlebars. The handlebar stays in place when mounted and tightened up.
What you will get. The length is 115mm or 180mm. There are 6 gaskets, 2 x 20mm, 3 x 10mm, and 1 x 5mm. 2. There are 2 gaskets, 1 x 10mm, and 1 x 5mm. You can adjust the gasket to fit your own height. The diameter of the tube is 28.6mm (1-1/8"), the handlebar is 31.8mm (1-1/4"), and the length is 90mm. Light weight design. The four bolt bar is in position. Simply connect the original fork stem to the new one. A universal short handle bar stem is suitable for most bikes.
👤It weighs 7.68 ounces and is definitely not T6 aluminum. It's not sure what it's made of. It could just snap in two with enough stress. Seeing that this is being used as a mountain bike part, it will be easy to see how much is needed to snap it. I will be asking for a full refund and throwing this in the trash. I am used to a certain level of testing and certification for products like this to make sure I am safe on the trail. This is concerning to me. "There is no consumer protection when products are sold on Amazon". Consumer protection also covers my safety and yours as well. I don't know if Amazon cares.
👤This is not a 90mm stem. I attached a diagram of how stems are measured, and it measures 105mm in that dimensions. It has a 45 degree angle. The measurement center is 74mm. I replaced a 70mm 7-degree steam and it increased the Reach just 2mm. Keeping Reach is important since moving the handlebars further away makes you lean over more, even if the handlebars are higher, and too little reach can lead to instability or twitchy steering. The part that is used to hold the steerer rube is over 2 feet tall. This is taller than many other stems, which is a good thing since it will reduce strain on the steerer tube. It means you'll probably need a lower space stack height because you don't want the top of the stem too far above the steerer tube. My handlebars were raised 35mm while I changed the reach to just 2mm. It should be perfect. The other stem on Amazon looks to be the same, but it comes in both 45 and 40 degree angles. This one is the same price as the other one. That one appears to have the same mistake. There is a If you want a brand for safety, the best one I could find is this Ritchey: https://www.amazon.com/Ritchey-Comp-4-Axis-Stem-Degree/dp/B07VYKZ38W It's only 30 degrees, but comes in various lengths. The "comp" version is only 80mm in length. There is a If the Wake stem is marked as 3D forged, it would be a good sign of strength. It's hard to believe that the weight and price are so high.
👤I wanted a more upright riding position on my trail bike in order to see what was going on around me. I thought moving my hands back and up around 50mm would do the trick. I was looking for a set of handlebars that would give me the rise and sweep I was looking for. Some handlebar sellers don't give specific dimensions for the bars they sell. I thought about replacing the stem because of the cost and the quality of bars. The Wake stem is 90mm long with a 45 degree rise, which is the same length as the old stem. My hands are now about 2 1/2 inches further back and about 2 inches higher than before, because I used the same flat bar on the bike. It was perfect for what I wanted and a better posture for trails. The product is well made and finished, with thicker tube walls and a taller steering tube collar than the stem it replaced. Only marginally heavier, and beefier. It is easier to swap out a stem than it is to swap out a bar. The low end bars are $30-50. It's easier to determine how the new product will affect your ergonomics.
The package includes a helmet. The European Standard and the American National Standard have high performance quality ratings. The all-in-one PC shell and high-density shock-absorbing foam of the Zacro Bike Helmet gives it excellent shock absorption and drop resistance, which makes it the most reliable safety. It was designed for maximum fortifications. 18 vents circulate air, keeping your head cool and dry in hot conditions. Their bike helmets are lightweight to reduce stress on your head when worn for extended periods of time. The inner PAD can be moved. The adult bike helmet that comes with the visor can be easily removed to help keep the sun out of your eyes and prevent rain from getting into your eyes while riding. The wrap-around padding is easy to clean, it is easy to clean the padding off of your head, and it is a good way to make sure your head is wrapped securely. The bike helmet can fit heads of all sizes, with a custom fit and fit for most teens and adults, thanks to its adjustability. Please measure your head before purchasing. It is convenient and usable. Their women's bike helmets feature high-quality linings to keep you cool on hot summer days. It's lightweight, comfortable and suitable for urban commuters.
👤I'm not one to leave reviews but this helmet saved my head so here it is. I have never felt safe or comfortable wearing a helmet. As an adult, I have never found one that fit them. I pushed them back as they moved around. I have a small head. I ordered this for our family trip to Whistler and I am so grateful! I crashed! It was bad. I broke my collarbone, shoulder, wrist, and head. There are only two small dents on the helmet. It is important to have a good fitting helmet, and I would have been worse off if I did not wear it.
👤I ride my bike a lot. I am a tough guy who grew up in the 70's, so friends told me to wear a helmet. We did not wear helmets. I bought this helmet on a whim. I wore it two days ago when I did a face plant at 22 mph. My face got involved to help slow me down after the front of my helmet hit the concrete. The photo above shows how much the foam liner absorbed. There was no scratch above my forehead, despite sustaining numerous injuries. Amazon won't let me show you the injuries. I did not sustain brain trauma, only the thought of having to pay the ER bills and replace broken equipment. Without this helmet, I would be in the hospital or the morgue right now. I can tell you that this helmet works if you compare it to another helmet. I can't say which is better, the one that costs more or the one that costs less. If you're debating about whether or not to get a helmet, what are you thinking? This helmet is for sale. It costs less than a meal out and could save your life.
👤I am very happy with this helmet. My wife and I are on bikes again. She fell on the back of her head after being cut off by a biker. My concern was great because she is on a blood thinner. The helmet was damaged, but it worked well and did what it was supposed to do, protect her head. I replaced the helmet that I kept as a souvenir. The product is nice.
👤The chin straps on my helmet are square rather than round, which makes it a light weight. Better sleep. Just like not wearing anything. I feel protected.
👤A helmet that fits a variety of head types. Cool riding on hot days. I hope I don't get to test it out.
👤This helmet is great. It looked more round in the picture and I chose it. My name is Charlie and I have been called that many times. It fit me with enough room to spare. My cap size is 7.
👤It was perfect for me. Black is good for all ages. Children all the way up to older people. The size is good for women. It would fit a younger boy child and girl, but it might be too small for a man. The black has a touch of silver gray, but it blends in. The visor is thin and nice.
Good service. Please contact them if you have any questions. Also, note: Measure your cushion size before purchasing in order to choose a cover that suits your bike. It is secure and safe. The combination lock is a great way to keep your gate or bike out of sight. You can keep your possessions safe by creating your own 4 digit password. The lock is long and will fit most latches. To create your own code, simply remove the loop part of the lock and make sure the dots are in a line. Pull off the rings from the capped end of the lock. Put the cap back on after you put the rings back on. Strong and heavy duty. The lock is made from metal. It's strong material and design will keep your door, gate or locker safe. If you want a lock that is easy to use and strong, this is the lock for you. You don't need a key to open it. There are multiple uses. Their lock can be used in many different ways. Why not put one in your garage? You could put one on your gate while you're away. If you have a locker, you could use it to secure it. All locks have a 100% money back guarantee if you don't like your purchase. They will refund you if you get in contact with them. It's simple! All locks have a 100% money back guarantee if you don't like your purchase. They will refund you if you get in contact with them. It's simple!
👤The lock is a great one, but it came without instructions. I needed a long shaft for three sets of cabinets. This was a good solution. I would have rated it 5 stars, but without instructions, it's hard to use, so here they are for future buyers. The U shape shaft needs to be removed. There is a Pull it off completely if you turn the right side of the room to the right and then the left side of the room to the left. Remove the number rings. The red markings are on the exposed body. Put the rings back on with your selected numbers on the Red marked lines and your code reading left to right. Put the cap on. Turn the end cap away from you. There is a Your new code is ready to use. The most exposed metal goes into the coned part of the lock.
👤There was no fault of the lock. It is too long for what I needed. I think the only issue that would make things easier is if they put some sort of marker on each hole where the lock meets the U shaped part. Maybe they would put a white paint mark on the entrance circle part of the lock. I kept getting confused about how the U part fit into the lock and kept flipping it around, every time I had to use it. I think it is an easy fix at home, but the lock was too long for what I needed it for. My suggestion is to use a white paint marker to mark which part of the U is. Make sure you have enough room to use it on the outdoor gate. I will figure out a different use for it.
👤I didn't know that until I received it. When people open it, they are surprised it comes apart completely and the rings fall off. There is a I wouldn't buy it again. There is a It was delivered fast and I think the description is accurate, but this lock is meh.
👤I have had the lock for a while. It seemed to work as it was described. I put the lock back on the cabinet after my wife left the lock open in the pantry. It wouldn't open. I thought maybe I had a different style of tool. It would not latch. I rolled a digit or two because I thought it was still set to out combination. It latched after several attempts. I went back to the cabinet to make sure it was secure, but now the code no longer works. I was lucky to not have it on the cabinet. Went to the local box store to buy something that will work. They provide a reset key for the new lock.
👤There is a lot of junk. The metal is very small. The description says it is not heavy duty. It could be cut with bolt cutters and heavy duty wire cutters. It is fine for low security jobs, like a locker in gym, but to trust anything valuable to this is pure foolisness. I don't get the other reviews. It is a low security device, but it may lock andunlock. It was too easy to cut it. As others point out... Are you listening to Amazon? The lack of instructions is not acceptable, as this is a true POS that is not described accurately. I will be sending it back. Do not waste your money.
You cannot enjoy your bicycle leisure time when you are in pain. You can enjoy longer rides on your bike. It is easy to mount and low cost will make your saddle feel better. This gel seat saddle is 7inch in width. The bike seat can also be used for indoor cycling. Before ordering, please confirm that the bike seat cushion can fit your bike seat.
👤I bought the seat for my Peloton because I heard it was unbearable. The cover is constantly moving and doesn't provide any additional support. I can't tell when the cover is on the bike or not. I bought bike shorts instead of removing it, which solved my problem.
👤It's missing some firm padding from the Peloton bike seat.
👤This is the best seat cushion I have ever tried. I use a cushion in my spin classes to increase my comfort on the saddle. The cushion is thick and supportive. The elastic underneath is very stretchy and will fit any standard spin bike. The bonus strap for tying the seat down is a great add-on. The cushion has never fallen off my seat. I can't recommend this item enough.
👤The saddle has made my bike riding experience better. The seat that comes with my new bike is very narrow and uncomfortable. I commute back and forth from school to the grocery every so often and it's a huge factor in my comfort. When I saw my package sitting on my desk, I couldn't wait to take my bike out for a ride. There is a My current bike seat is perfect for the Zacro Gel Bike Seat. Even though it has a non slip texture beneath the seat, I was able to adjust the tightness to prevent it from moving around. Installation was easy. The seat is very comfortable and provides 1-2 inches of thickness. When I ride my back, I can see how much lighter it feels. The gel seat has met my expectations and made me happy to review it, which was provided at a discount in exchange for my honest opinion. Here are some pros and cons that I would like to note. * The padding is thick to provide extra comfort and the texture beneath it is non-slip to prevent slippage. There is a * The gel padding on this has definitely been a positive purchase for me. I would recommend this bike seat to anyone who has an uncomfortabe seat. This does not replace your current bike seat. This is added to the top of it. There is a I depend on honest reviews from honest reviewers when researching and buying a product. If you think my review was helpful, please click "Yes" below. Thank you!
👤I put it on my bike. It is amazing. It does not slide around. At all! I will never not use one again after having this. I will buy another if it wears out, but I am not sure it will because it is made so well. I think it's underpriced for what you get. I would have been happy to pay $29 for this. It is a complete steal.
👤I enjoyed the class but my butt didn't fit. I don't feel comfortable wearing bike shorts to yoga because I participate in multiple workout classes. I discovered the Zarco Gel Bike Seat Cover. It fits in my gym bag and is easy to attach to my spin bike at the beginning of class. There is a The Zarco Gel Bike Seat cover is very soft and comfortable. My eyes, wallet, and butt are very pleased with this purchase.
Bicycle neck pad products from Qikour. In this article about bicycle neck pad you can see why people choose the product. Pangda and Luxobike are also good brands to look for when you are finding bicycle neck pad.
Qikour, Pangda and Luxobike are some of the best brands that chosen by people for bicycle neck pad. Find the detail in this article. Power Guidance, Profile Designs and Fox Racing are also brands that their products are worth to check.