Best Bicycle Motor Mount

Motor 20 Aug 2022 10+ Comments Open

1. U Bolt Engine Cruiser Motorized Bicycle

U Bolt Engine Cruiser Motorized Bicycle

The product has a 12 months warranty. Please contact them first if you have any questions. They can help you solve the problem. The fit is 80cc. The Beach cruiser has a motorized bicycle engine. The package includes a U-Bolt Clamp Kit. Before ordering, please compare their product against yours. Thank you. Arrival within 15 days. Arrival within 15 days.

Brand: Jl Jiangli Legend

👤Be prepared to go to the hardwear store. You can save money by getting a plate and drilling holes in it.

👤I will check with my neighbor tomorrow to see what happens.

👤Bolt holes don't line up. Have no idea how this passed.

👤The bolt to the engine is too thin and the mount is too wide. Don't buy waste of money.

👤It was perfect connected to my bike and engine.

👤The quality was better than I expected.

👤Good keeps the motor in the bike.

2. Motorcycle Universal Accessories Compatible Smartphones

Motorcycle Universal Accessories Compatible Smartphones

The motorcycle phone holder is sturdy and safe. It keeps your cell phone out of the way on a bumpy road. The mount allows for easy rotation between portrait and landscape view. It's convenient to answer the phone, play music, and use the gps. Silicone pads keep your phone from scratches and vibration, and the bike phone mount is shockproof. Silicone is presented to better protect your phone when riding a bike or motorcycle. It's easy to install and use, just adjust and lock the nut. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, spin bike. Universal bike cell phone holder bike is compatible with all phones. The handlebars have a diameter of 21 to 28mm.

Brand: Dogain

👤The frame is good and I use rubber straps to keep the phone tightly connected.

3. KAC Platform Standard Electric Bicycles

KAC Platform Standard Electric Bicycles

IKURAM Lifetime Warranty is backed by it. IKURAM bike carrier racks are backed by professional consulting services. For more information, please visit the IKURAM web site. The patented Anti-Wobble System keeps bikes safe. The hitch pin and locking knob add security. The rear reflector makes it easier to see. CONVENIENT: The tilt design makes it easy to access the rear hatch when not in use. It'sTILE: 2 bikes up to 60 lbs each with durable powder coated steel tubing. Heavy duty 5” wide trays can be adjusted to fit most bikes. A KAC Bike Frame Adapter may be required for low Y-frame bikes. Only 2” hitches are allowed. Most parts are easy to use. The hitch pin lock, instruction manual, and all installation hardware are included. There is a limited lifetime warranty. The quality and design of the Bike Rack products are what they stand for. There are a lot of mishaps covered by their Lifetime Warranty. It is against the law to use an RV or 5th wheel. There is a limited lifetime warranty. The quality and design of the Bike Rack products are what they stand for. There are a lot of mishaps covered by their Lifetime Warranty. It is against the law to use an RV or 5th wheel.

Brand: Kac

👤I like this back rack. It came in a big box with well written instructions and assembly went with a hitch. That's right. There are three locks on this rack, one on each bike center tube hook and one on the hitch pin. If you don't have any bikes, it can be folded up on the car. I use a regular hitch pin that doesn't need to be screwed in and the rack feels really solid going down the road. Highly recommended.

👤It had everything I was looking for, and it didn't cost me more than $400, which was great. I wanted a rack for my bike. My E-bike is 60 lbs. and most rack couldn't carry it over 35 lbs. You would have to buy a tray just for 4 tires to get the $400 that the racks had. The price is unbeatable for what you get and everything about this carrier is exactly what I was looking for. Also works well. I'm confident that I'll be able to carring my bikes anywhere.

👤I needed a bike rack since the better trails and roads are an hour or so away from home. I was initially shocked by the high prices of bike Racks on the market such as the $750 Thule aluminum & plastic carrier. There is a All load bearing parts are steel and heavy duty. The bike is hanging from the top tube rather than sitting securely on the bike wheels. The bike frame is secured with a hook. There is a Lift gate access and easy loading are possible with the tilt feature. There is a The construction is well designed. There is a If you only have one bike, you don't need to use a lot of wheel carriers. There are pros and cons. There are straps on the wheel that are designed to prevent any bounce and the hook that holds the bike down. I already had better and heavier duty motorcycle wheel tie-down straps that would hold on to the bike in the event of a catastrophic failure of the hook, which is why they were a bit short for 4 tires. There is a This rack was very pleased with itself. I think it's the best for the price and features.

👤This is a let down. Everyone likes this rack. The issue I had with the stand was that it sits at a 100-115 degree angle towards the back of the car not allowing a second bike to fit without the handle bar edging the back window of my van. It's crazy. I was going to buy a 7 inch hitch extension to seat the bikes further out from the window. There is a But... On my second local outing with my bike, the turn knob broke free and I didn't turn the screw because I was spinning freely. I had to disassemble my bike to get it out from under the arm which held it. Why was it lucky? The second bike is locked into a lower point of contact because the knob that broke is on the upper arm. The lower arm is trapped by the upper arm. I would have to cut the metal to get the second bike out. There is a There is a problem with PLASTIC. It's never a good idea to make anything that requires tightening and securing plastic. The plastic being so open to the environment and in a vital point of usage will cause the racks to be stripped out or rotted within 2 years. Everyone will have an incident like this, and it will happen to them later on. The rack is smart and people are giving great reviews. They will not be happy later. There is a It was disappointing to say the least. The rack is poorly constructed and designed.

4. IKURAM 4 Bike Bicycle Foldable Receiver

IKURAM 4 Bike Bicycle Foldable Receiver

Universal Fit is the type of fit. There is a patent pending. ROLL DOWN AND BROWSE THE A+ PAGES FOR MORE INFORMATION. Quick hitch pins assist in accommodating different size bike frames for safe and reliable transport. The bike hitch rack is made of all steel and has a protective powder paint finish. The dual-arm bike carrier rack is more stable and easily accommodates up to 4 bikes. Convenient access to the rear of the vehicle with tilt-down feature. The easy fold-down Arms are great for transporting and storing bikes that are not in use. IKURAM Lifetime Warranty is backed by it. IKURAM bike carrier racks are backed by professional consulting services. For more information, please visit the IKURAM web site.

Brand: Ikuram

👤We needed a bike rack to get into mountain biking. The features that I have not seen before make this rack convenient to use. There is a Most of the metal was very thick and heavy duty. Sturdy and strong. The free hitch stabilizer means very little wiggle. When not in use, folds compactly. The tailgate can be adjusted to open without bikes. There is a There are rubber latches for attaching bikes. A very good deal. There is a The rubber is a bit stiff at first, but becomes easier to work with after a few uses.

👤Assembly was easy. The product is well made. We took four bikes on a trip and drove over 600 miles. The bikes weigh 95 lbs. This is rated at 140. There is a ThePivot function to utilize tailgate is nice and works as designed, the straps are easy to use, and it came with an extra replacement strap. The arms seemed to be too short. The brackets for the last bike were very close to the end of the tubes, meaning bikes were crowded on each other. If you care about the finish of your bikes, you should probably use tape or something similar to protect them from rubbing. The loop for the pivot pin retaining wire came loose after a few uses. See the photo. This was being used in a normal way. This shows a rush in the manufacturing process. It's easy to crimp this. I am confident I can fix it with a pair of pliers in about 10 seconds, but it was a small annoyance after so little use. It doesn't make the product non-functional as a bike rack. Attaching the bike rack to the hitch receiver requires a nut and bolt. There was not enough room for the bolt head to be tightened. I don't think most people will install a bike rack to their hitch, so a hitch pin is more appropriate and should be supplied. I bought a locking hitch pin. It's harder for someone to remove the rack. I was always aware of it when we went over speed bumps and rough roads with this type of rack. It was difficult to tell if there was flex in the rack or if it was just moving with the vehicle. I checked the welds when we got home. There is a This is a good product.

👤The entire top section bent downward when I traveled 65 miles. After several weeks, the company sent me a new top section. I took a 23 mile trip and the top broke, the rubber straps broke at 65 miles an hour, and the green wheels were smashed all over the interstate. If you don't have money to spend, don't buy this company. If you have to, throw the bills out the window so the people following you don't kill the family. I will never buy anything from this brand again. I don't want a free replacement, I threw it in the scrap metal pile. Trash is dangerous. The company contacted me and gave me a full refund after reading my review. The strings were attached to the bottom line. They sent me something and I copy and pasted it. There is a Jody, I'm here. Thanks for your reply, please check it in your account, I have full refunds for you. Can you help me revise your review? This is important for our store and I need your help. We will keep improving the product quality. I am so sorry for the situation again. This was next after the revised review. There is a Jody, I'm here. Sorry to bother you. Is it possible to change the review star to 4 or 5 stars? This is very important for our store and I would like to not talk about the refund or revise the review content. There is a I need your help. Thanks in advance. They need to pay for my son's bike. Guess what no more responses from them will be. You are the judge.

5. Universal Bicycle Handlebar Samsung Smartphone

Universal Bicycle Handlebar Samsung Smartphone

Touch ID andFACE ID are used. The phone holder is compatible with the Face ID sensor on the Apple phones. The Bike Stem Mount is designed to turn your phone into a professional cycling computer. Flexible silicone bands fit most phones and cases between 4 to 6.5 inches. Rugged cases might not fit larger phones. Soft-touch silicone material absorbs bumps and protects your devices and accessories. Buy with confidence with their 100% satisfaction policy. They can offer a replacement or refund for quality issues.

Brand: Bone

👤I was expecting this to work as well as it did. I mounted it on the stem of my bike after I used it with my S8 in an otterbox. Most of the 100 miles were on gravel roads and trails. The phone felt flimsy when I first put it in place. I rode it down the alley and it seemed to hold it in place. I kept it on for my tour. I was able to view my phone, which I used for navigation. When I went down a steep descent, my front wheel sank into the sand. The crash twisted my brake levers and put a big hole in my helmet, because I went flying over the bars. I was expecting to have to look for my phone after the impact, but it was completely undamaged.

👤I used it this morning on a 22 mile ride after buying it yesterday. The corner bands are so close to the edge of the phone that I was afraid it would go flying. Even when I reached around the back to use the fingerprints on my phone, it held up. I hit some substantial bumps as well as some repetitive vibrations and it held my V40 thinQ securely the whole time. I am happy with this case, it is better than my old one. There is a I have had this phone holder for about a year and a half. The corner bands just broke. The cycling season here is about 9 months long and I have probably ridden 7k miles since getting this phone holder. I feel like I got my money's worth even though it broke. I love the design of the one I am reordering. This one covers the finger print sensor on the back of my phone, so it works perfect for my phone. I can't switch to facial recognition because I have a bug shield on my bike helmet, which covers the top half of my face. I have a Pop Socket on the back of my phone case that fits on the holder without a problem. I am willing to pay a higher price for this one since it works better for my phone, even though I think it is overpriced.

👤I had a bar mount on my other bike. I have ridden about 100mi with this stem mount. It's great. It works great with my phone. It's easy to get the phone in and out, just practice. There is a The mount is quite secure, but the phone does move a little on the bumps. I like the new design of corners and can use a finger. This is a great bargain, works with any case, and seems like a far better solution than the "twist lock but you must use our case" option.

👤I have a mount on my phone that holds it perfectly, and I can use the tap and glance to open it, it's ready to go. The phone is held in the mount to the stem cap on my bike. I have taken a lot of bumps, drops and bunny hops.

6. Phone Holder Mount Bike Handlebar

Phone Holder Mount Bike Handlebar

The right size is disposable hand napkin, 12 x 17 when unfolded and 8 x 4 when folded. Sturdy and safe. The motorcycle and bike phone holder has a special shape. It keeps your cell phone out of the way on a bumpy road. The protection is shockproof. Silicone pads keep your phone safe from scratches and vibration. The motorcycle phone mount holds your phone. Wide Compatibility Universal bike cell phone holder with thickness up to 15mm, like Phone 13 1 2 Pro Max Mini Xs XR X 8 Cell phones include the Plus 7 6s, the S10e S9 S8, the Note 9, and the other phones. The cellphone can be adjusted to a horizontal or vertical screen. It's convenient to answer the phone, play music, and use the gps. Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm). Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm).

Brand: Lamicall

👤I don't know how long this will hold up. The mount lost its hold on the angle setting after I lightly bumped it. I was retightened. It feels like a week. I'm afraid it won't be able to take the damage from the bike. We will see. There is an update... I screwed the plastic adjustment down tight after using some handlebar grip glue on the ball mount. It seems to stay where I put it. The rubber shims on the handlebars do not seem to have an issue with staying put. Don't make this mount hard, it will work now. The only thing holding it is a plastic shaft with a plastic ball that goes into the back of the phone mount. There is an update... The company contacted me after reading about my issues with the product. They have great customer service. The new version of the holder is much stronger than the original one. They took care of me.

👤I knew I was going to love it when I opened the box. Feels solid, looks sleek, easy to assemble and install, simple to insert phone, padding everywhere your phone makes contact to better hold, prevent damage, and absorb shock. The phone is locked when the lock switch is on the rear. Your phone is held securely even without a lock. When riding on bumpy surfaces, the holder pivots in all directions, but not so easily. The rear camera on the phone is partially obscured by a bar in the back, but a tiny zoom and the obstruction is gone. If you want to record your rides, this is great. If you want to use that option, the front facing camera is not obstruction. I have a slim case on my phone and it fit in the holder. I'm glad I took the risk with the item that didn't have many reviews on Amazon. Lamicall is a great product.

👤I've been looking for this product. When I mountain bike a lot, I end up stopping to bring my phone out of my pocket because I get lost. I wanted a phone that would hold up well on the trail. It works better than I thought. The video is attached. My phone is a small one with a large screen. I didn't lock it. It held it as well. It had rubber and Silicone things to adjust to the handlebars. The stem is a bit thicker than my handlebars. I removed 3 of them. It works well.

👤The first item I bought was never delivered. I received my second order and it works great. I have an iPhone 11 max pro with a pink defender case. A good protective case was necessary for me because I walked on concrete as a high school teacher. My phone is in my case and any way the gadget can hold it. It takes a little bit of wiggling to get it inside the holder. There is no sliding out. I like the fact that you can change the orientation of your phone. Great item.

7. Electric Brushless Complete Controller Motorcycle

Electric Brushless Complete Controller Motorcycle

The product has a 12 months warranty. Please contact them first if you have any questions. They can help you solve the problem. The Kunray MY1020 Brushless Motor has an Electric Brushless DC Motor, a Full Copper coil, and a high quality more long life. The motor type is a brushless DC high speed motor. 48V 2000W 15 Mosfet 33A Brushless Motor Speed Controller has a Hall Sensor, E-Brake, 3 speed, reverse, and power lock functions. The function of the LCD Handlear Twist is 48V battery powered, with a screen that has aThrottle Twist, and a 3 in 1 Handlebar. The application includes: electric scooter, motorcycle, ebike bicycle, go karts, e-bike, motorcycle, E Tricycle,mid drive motor kit, complete set, and more. What you get is a motor, controler, and manual.

Brand: Kun Ray

👤I received the motor/controller and am in the process of installing it, but it will take me a while to review it because it is in my own design. I thought I would do a review on what I know. There is a The motor and controller were wrapped in foam and shipped. The product description states that there are nicks and scratches on the motor. These are not going to affect the performance. A simple buffing can resolve the problem. I would have liked to have seen mating connectors for everything. I will have to cut the ends of the cables and make a note of the cables for my project because these are not STD. It's possible to prevent that by having mating connections. There is a Once my project is done, I will probably help supply a schematic that people will use. The indicator light and brake light both show 48V output. I'm curious to see if I can find lights that are 12V or if I can step that down. If the SM 48V/60V wire is connected, it's not clear if that changes to 60V. There is a There is a reversing signal pigtail. I assume a simple NO connection will do the trick. The motor/controller was as expected, but I will change this post as I find out more. 2 photos and a video were added. I am building an electric mower. Some will say it is not powered up. I will show that most electric conversions have been over powered. You don't really need that much. The original mower had a Twin Cylinder engine that I got after a son drained the oil, but there was no replacement oil. Dad came home and the engine was on fire. The Chassis is in great shape. There is a A test spin with no load is shown in the video. It was running at a slow pace. I did not run it fast because the chain was loose. I am working on a chain tension system. This was only a test. There is a The third picture shows where I made a mistake by only using the bottom mounts, when I put the wheels on the ground, the motor and mount bent. It's fixable. There are some points on my setup. I am running my mower on batteries that are connected in a series. I will build a more appropriate battery stack once I get the motor mounted and wired. 2. It's a reversal. The flip switch needs to be wired into the connector. When flipped, you can reverse it. It is very simple. That is all for now. The next step is to look into the brakes and lights. Since there are no opposing connections, I have to change all of the connections. There is a Someone asked if the graph was working. It does. You have to give over 42V. The battery symbol and bottom bar of power will be displayed if not. The battery is dead. If anyone is interested, I will provide a complete set of plans on how to use this motor for a conversion.

8. TruActive Bike Phone Mount Holder Motorcycle Phone Mount

TruActive Bike Phone Mount Holder Motorcycle Phone Mount

Easy installation. The bike phone mount is easy to install. The extra 4 silicone pads make your phone fit better with the handlebar, you can add or remove the silicone pad according to the diameter of the handlebar. There are various types of bicycles, motorcycles, stroller, shopping cart, electric scooter, indoor treadmill, indoor bike. The handlebar's diameter is 1.57" (15-40mm). The Bike and Motorcycle Phone Mount has a unique, custom fit with an anti-vibrating ring. Their lock grip and rubber secure straps hold your phone in place, so it won't slip around or scratch your handlebars. Other phone mounts for bikes were made with cheap parts that could be used. They wanted to create a motorcycle phone holder that was durable enough to hold up to the wear and tear of riding and INTUITIVE enough for everyday use. Their materials have been tested by engineers with years of road safety experience to make sure they are the best for a bicycle phone mount. Universal fit is for your phone case and bar size. Their bike and motorcycle cell phone mounts have maximum thickness of 0.71" and can be used with any device. Pro Max 11 is a Pro/XR/XS/XS MAX/X 8 Plus/7 Plus/7/6S Plus/6S. Their bike phone holder comes with two sizes for a tight fit on any handlebar with a 0.55”–1.26” diameter or circumference of 1.72” to 3.92”. You can use their ball joint to adjust your phone's orientation for any viewing angle. Use with anything with a handlebars. It's easy, it's tool-free. Easy to use instructions are included for installation of their bike cell phone holder. Their cell phone holder for bike comes with 6 different colored bands with a 4-CORNER GRIP to hold your phone in place, in Red, Black, Blue, Pink, Orange and Yellow. They are dedicated to creating a high-QUALITY BIKE PHONE HOLDER. They use it on their own bikes. Don't worry about your phone! They are here to help if you have any issues. They are dedicated to creating a high-QUALITY BIKE PHONE HOLDER. They use it on their own bikes. Don't worry about your phone! They are here to help if you have any issues.

Brand: Truactive

👤Awesome product! Two weeks after I bought this product, I had a car pull in front of me at a blind intersection. I was going to cross the street. The car was in front of me when I looked forward. I hit it with full force. I didn't get hurt very badly. My bike was totaled, my ear buds flew off, and my phone was undamaged. I put this product to the test and it was better than I expected. Be safe out there!

👤I use it on my motorcycle and road bike to keep my phone safe. The extra secure bands on the phone will keep it in place. The mount came with an extra long bolt. There is no movement at all. Great product!

👤The product is good. I rode it all week through Georgia and South Carolina, and it held up well. The only thing that needs to be fixed is the teeth that grab the phone when you push both sides closed. The fit of the otter box case is great but after a week of riding my teeh, the inner teeth get bent up and they are not grabbing the phone like when I pit the holder on the bike. I ride a vehicle. I was confident in the holder. The inner teeth need a better design because they bend up to easy. It's a great holder, other than that. I have told many people about it. I would continue to be a customer. I would like to see those teeth more durable.

👤I was skeptical because most of the phone holders I've used are wobbly, especially with my big iPhone 8 Plus. The TruActive mount is awesome. It's easy to install, adjust and hold my big phone without drama. I rode my bike a few miles over pavement, grass, gravel and dirt. Not a single adjustment or movement. The rubber gripping tool makes my phone easy to reach. There is a I can answer texts or get directions without drama.

👤I had a mount that didn't stay in one position and only held the phone in one place, but I never felt comfortable with it. The elastic band and grip on this Truactive holder are on both sides of the phone. The phone is in one place. The side grips hold the phone in place even if one corner slips off, unlike the prior holder. I feel very comfortable with my new phone. It's nice to have an easy to install phone mount that I don't have to worry about. Despite regular use, it is holding up well. I would recommend this mount.

👤We like to play Pokemon. We have a very bulky Note 8's case so it's hard to find anything that will fit the phone. The product fit perfectly and passed a number of tests. The phone was stable. It is easy to switch from bike to bike. We have full access to pokemon go because it doesn't obstruct the buttons or screen.

9. Ibera Bike Rack Frame Mounted Adjustable

Ibera Bike Rack Frame Mounted Adjustable

We offer a 2 years warranty for the product. It can be used for riders with weights of 50 to 100 kilogrammes. If you are lightweight, the bottom screw is 220 lbs. It can carry up to 55 pounds. Ibera parka quick-release bag mounting system. The height is adjusted for most 26"-29" frames. The top fender board splashguard is lightweight and durable. Can be mounted with Ibera trunk bags.

Brand: Ibera

👤A nice rack. I mounted this on a bike. There was clearance from the top of the tire to the bottom of the rack. I used zip ties instead of mounting the brackets to the frame under the seat. You have more options as to where you can attach the brackets, it is very secure. If you need to adjust or remove it, you just cut the zip ties. Will take pictures. There is a If your bike falls over you risk a good chance of one of the mounting bolts snapping or the entire rack bending, which is the only problem I have with this rack. The light weight of the rack limits makes them durable.

👤The rack is built to last. The issue is not that. The installation is not clean. The lower rack stay arms that attach the bike have soft threads. In my case, the rack spread the attachment slightly, but the threads wouldn't engage the bolt threads cleanly. I added threadlocker to get a tight fit after re-tapping the threads. The upper rack stays because there isn't enough brackets to attach cleanly. I had to buy some flat brackets to have a clean installation. I've purchased Topeak and Thule rack, which come with multiple options for brackets, for a professional looking installation. I would not buy this rack again. A rack installation should take 15 minutes, not a multi-step process that requires more brackets.

👤I have the Ibera RakPak system on all of my bikes. Any of those bikes can use the rack trunk and panniers with a click. It's not great for the bag business, but it sells a lot of great priced racks. I bought this rack as a Warehouse Deal and was supposed to have all of the hardware. The extra long and flexible rack stays were missing. The rack sells for $12. Someone purchased the rack with the intention of stealing the hardware and returning it for full credit. I understand that people can't have all of the knowledge required to return all of the parts. I had a spare set of stays and extra screws from an old rack to complete the installation. If you're one of the dishonest Amazon customers who abuse their generous return policy, be aware that some hapless customer down the line will inherit the consequences of your theft. There is a To Amazon thieves, may your flats be many, your roads all uphill, and the wind always in your face.

👤I bought a second Ibera pakRak touring carrier plus because I have been using the first for over a year and I needed a second rack for the backup bike I'm preparing mainly for travel on trips where I don't want to. This isn't the best choice for everyone, but it is definitely one of the lighter, cheaper and stronger solutions to pack for anything from daily commute to international tours. The main problem with this rack is that some of the other brands of panniers will not fit without modifications. My solution for using my preferred case is to add a couple small 'P' clamps, screwed down with the same bolts that connect the bottom extension posts, and then add 1-inch key rings. The key rings give me places on each side of the rack to attach the pannier hooks, so that I can keep everything secure. It would have been nice for Ibera to include attachment sites for those using other pannier solutions, like me, who don't want to spend more than necessary on panniers, but who aren't. The facts that this rack mounts back far enough to keep my panniers out of the way of my big feet, and that the rack protects my wheels from being hit by the panniers, are especially appreciated. It's great for carrying all my camping gear, including tent, fly, pad, pillow and sleeping bag on the top, while I use relatively small panniers to carry everything else on trips.

10. AONKEY Universal Silicone Adjustable Handlebar

AONKEY Universal Silicone Adjustable Handlebar

It is easy to install, and it can attach phone firmly to the handlebars. The design of the phone makes it easy to control it. The rubber belt makes it possible to fit all sizes of phones. Plus, S7 edge, S6, S5 and many more. Attach and detach from the varisized handlebar with ease. It is possible to work on different kinds of handlebars. The cell phone holder for bike is a small and light weight, and can be used on a bike, stroller, scooter, treadmill, shopping cart, and any other place you want. Aonkey is a professional brand seller that committed with cell phone accessory, including bike phone mount, cell phone stand, and car phone holder. If your product has a problem within 18 months, please contact them.

Brand: Aonkey

👤This is a really cool device. I needed a way to hold my phone so I could see it. I had to take my phone out of the regular case and put it in a new one that fit the holder. I returned that one because it was a pain. I saw this while I was looking. I bought one to see how it worked. It holds the phone in a way that allows access to the screen. I don't usually use it in this way, but if you want to see the screen in landscape mode, it rotates. I put my phone in the bag when it rains because I made a small hole in the bottom of the bag for my charging cord. I can use the phone in the rain with the bag securely fit into the holder. I can buy 2 more for my wife and son. I highly recommend it. It's the best!

👤I was looking for a phone holder after buying a new phone. I took a chance because the reviews were good. I was skeptical at first, but believe me, it works. I was involved in a bike accident. I was hit by a vehicle at 55 mph. I was thrown from my bike. My bike was thrown. I could see my bike as I lay on the ground. The phone was undamaged. Don't let the looks fool you. It works. I'm not sure if any other holder could do that. Buy it.

👤I was shopping for something to hold my phone when I ride so that I could use the workout app on the Apple Watch. I decided to try it. When I opened the package, I thought it was never going to work. It looked too small, flimsy, and unsuited to keeping my expensive iPhone 6S Plus from having an up- close and personal experience with the pavement. I just got back from my first ride, and I'm ready to eat crow. It works as simple as this. I have a Spigen Tough Armor case on my phone. You have to stretch the rubber retainer out a bit to reach around the 6s Plus, but it didn't seem to bother you. I like that you can mount the phone where I want it, so I can use a landscape view, even though I don't want to use the phone in a landscape. I was certain that it would wiggle and jiggle so much that it would be useless, but it actually holds the device pretty steady. I only ride a mountain bike for fitness. I didn't try to careen off the cliffs or the hillside. It works well for me.

👤This is the best design for holding your phone onto your bike, and I use it on my bikes a lot. The value that you get from this and its ability to be moved from one bike to another gives this an advantage over other designs. It holds my Honor View 10, which is about 6.4 inches. I've used this on my gravel bike and have no issues with it holding my phone. The strap that goes around the stem is made of good quality rubber material that does not slide. When you're swinging the bike from one side to the other, the swivel function does not flop around. I have yet to use it on my mountain bike, but it holds on to my phone when I am on the trails. I would highly recommend this product to anyone who doesn't want to spend a lot of money on other phone holding devices that have the same effectiveness as this product. It works and is durable.

11. GUB Motorcycle Aluminum Rotation Adjustable

GUB Motorcycle Aluminum Rotation Adjustable

You can adjust the width from 50mm to 100mm to fit a cell phone. Can hold up to 7 inch phones. The Sponge protects your cell phone and the metal phone mount will hold your phone tightly on the bicycle. The Bike Phone Mount does not obscure the screen, it is perfect for large screen phones. All screen phones include the iPhone 11/iPhone 11 Pro MAX/Xr/xs, the Note10 Note9 8 7 full screen, and the S20 S10+. The viewing angle can be changed at will. The bike phone holder can be installed on the handlebars. Can be used on motorcycles, mopeds, e-bike,Folding bike,scooter, etc.

Brand: Gub

👤This product is easy to use and set up. I have it on my motorcycle. I will get another one for my quad. My phone is attached and detached in two seconds. The only problem with this item is the security feature, do you need a specialty Allen wrench to attach it to your handlebars? You can't use a standard Allen wrench to install it, you need to use their specialty Allen wrench and the one they sent me didn't work so I needed to use my grinder and drill bit to make it work I have to make sure I don't lose the Allen wrench because I may need to make adjustments once in a while. Nobody will attempt to steal this off my bike. I am sure other people have the same problem that I did. The product is perfect.

👤Thankfully my plastic phone holder failed. I decided that my next mount should be metal. I found this mount and it looks great. The mounting hardware is rock solid and was clearly designed with longevity and quality in mind. The mount lacks the rough edges and poor alignment of many items sold on Amazon. The mount appears to be designed by an engineer. The phone body is tightened with a screw mount. I secured the Note 9 while it was still in its plastic case. It was large enough to fit in the room to spare. There is a The mount comes with one side that fits all and the other side that doesn't fit around a larger tube such as the stem tube or wider handlebars. There are mounts that can accommodate a wider tube. It would be a great improvement if this mount came with one of them. There is a The phone cannot be tilted back or forward. It is locked in place and in orientation once it is tight. When the screen is throwing glare into your eyes, you can't adjust the tilt to diffuse the light. This isn't a big deal, and I would rather have a very secure phone mount. There is a I give this mount 4 stars. It would be a 5/5 with a more versatile mounting hardware.

👤I bought this one because I wanted something that wouldn't snap in half at the first wreck. This is verydurable. There are negatives to the fact that the handlebars have a round connection. I don't like the idea of keeping a Unicorn tool in my bag if it gets lost, and the Allen wrench is a special one. My phone is in the carrier and it turns the volume down while I'm in it. There is a If you have an iPhone, round handle bars, and do not mind keeping a unique tool on you for adjustments, this is a good item.

👤I bought 3 of them, one is on my motorcycle, the other is my phone, and the last one was solid and secure on my first ride. I didn't worry about my phone when I took the expressway. Highly recommend.

Summary

What is the best product for bicycle motor mount?

Bicycle motor mount products from Jl Jiangli Legend. In this article about bicycle motor mount you can see why people choose the product. Dogain and Kac are also good brands to look for when you are finding bicycle motor mount.

What are the best brands for bicycle motor mount?

Jl Jiangli Legend, Dogain and Kac are some of the best brands that chosen by people for bicycle motor mount. Find the detail in this article. Ikuram, Bone and Lamicall are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com