5. Their goal is to provide a good service and shopping experience. You will be protected by special customer service from the store. If you're unhappy, please contact them directly via Amazon. Within 24 hours, they will take care of you. Non original replacements. Baja BA 150cc is a fit. ATV X15 X18 X22. The Nini Pocket bike has a 70cccccccccccccccccccccccccccccccc There are scooters, mopeds, ATVs, dirt bikes and go karts. Fit for 49CC. 60CC 66CC The bicycle engine is 80CC. The package includes a fuel petcock filter kit and pocket tape. If you didn't receive HURI branded pocket tape, you could apply for a full refund. If you didn't receive HURI branded pocket tape, you could apply for a full refund.
👤I couldn't find the original valve. The kit and valve did the trick. I had to grind it to get it on the mount. 6mm is the length of the hose. The original was set up so that the extra hoses and clamps could be used. The motor is a Honda clone.
👤There is plenty of extra line for whatever you need.
👤It works well and is built to last. It came with everything I needed to do the job well. I lost a useful gift that came with it. If you feel friendly, please send me another tape measure!
👤I no longer go through gas on my pocket bike.
👤Plug and play is easy to use.
If you have a problem, you can contact them by email. The package includesclutch cable. The left clutch lever is made of alloy. The lock handlebar has Throttle grips. You can kill switch. Please check for the details and make sure it's the right one. It is easy to match original equipment. They provide clear pictures. Make sure that it can fit your machine by comparing its appearance, shape and size with your original unit. They provide clear pictures. Make sure that it can fit your machine by comparing its appearance, shape and size with your original unit.
👤I had to use a 1/2 inch drill bit to ream it out because it was too small to fit on a normal handlebar and I had to paint it with silver metallic nail polish. I guess.
👤The kit is correct this time, thank you.
👤Didn't like that they didn't include the throttle cable or the clutch cable, will let Amazon know about it, you don't get what you pay for.
👤It is a good backup for a bike. The plastic throttle on these bikes can be broken easily.
👤Well made for the bike and engine. It worked very well. Thank you.
👤The lever gauge was the best upgrade part of the part kit, it was easier to use the recommended spark kit. I like the grips at eagle's Auto.
👤A motorized bicycle works great.
👤All is good for a new installation on a new build with an old motor.
Fit 2 strokes 49cc 50cc 60cc. 66cc The bicycle push bike has 80cc engine parts. Applicable models 49cc/ 50cc/ /60cc is a good size for a pull start starter. 66cc/ 70cc/80cc. Two-stroke engine bikes. Please be assured of your purchase, it's brand new. High quality aluminum. The pull start starter is made of high quality aluminum alloy material, which is wear resistant and durable, not easy to break, and has a long service life. The pull start is manufactured to strict quality standards. Professional Manufacturing has an Exquisite handle. The shell is thick and easy to start. The 80cc 2 stroke pull start has good reliability and low working noise. The pull start for 80cc motor is easy to install and the pull string is easy to pull. Reliable to use, the ideal and direct replacement for an old or damaged pull start. You can start your vehicle with a cable. High quality products and services have always been what they stick to as a professional seller. Before leaving the factory, every pull start part has passed a quality inspection. Before purchasing, please confirm whether the product is suitable. High quality products and services have always been what they stick to as a professional seller. Before leaving the factory, every pull start part has passed a quality inspection. Before purchasing, please confirm whether the product is suitable.
👤I had to cut the left pedal lever to clear the pull starter housing. I replaced the pull cord because I could see that it was in bad shape. I bought a lawn mower and a pull cord. There are good videos on the internet. I used Sta-Bil "Start Your Engine" starter fluid and started my car with ease after flipping the black air cleaner upside down.
👤I gave it one star, but I shouldn't have cheaped out on everything, especially the pool cable, which I ripped off and tried to fix, and they should have spent money on it.
👤I replaced the rope with break wire because the plastic bit that the rope would draw through would ware as fast as an eraser. Your welcome for the idea to use a brake line.
👤Didn't get to use. As per the other reviews, broke before it worked.
👤The product broke after I pulled it a second time.
👤Had to tighten the recoil spring. The plastic rope guide is cheap. The grooves were burned within three pulls.
👤Don't buy it, it didn't work the first time you tried it.
👤I like the products because I don't have to start my gas bike, but the problem is I didn't know it was on the front porch, the delivery guy should have rung the bell to make sure nobody was messing with it. Thank you, I got it.
If you see that the product is faulty, please do not return it. Please contact my store customer service as soon as possible, they will send you the missing accessories. The front hub kit is 36v. The electric bicycle kit has a brushedless geared bike motor and front wheel. Also, note: The battery is not included. ) The Motor ebike conversion kit with headlights and button switches makes it easier for you to ride in the night. The controller box is waterproof and has front bicycle wheels. The pedal assistance system 8 is more sensitive and allows you to ride without the need for a motor. The e bike conversion kit has a G51 display and offers a number of functions. Don't replace your Twist Throttle grip with the use of thumb throttle accelerator. The power supply will be disconnected immediately if the controller senses the brake signal. The Electric Bicycle Wheel Kit is easy to assemble. The electric bike conversion kit has everything you need to convert an electric bike. The Mountain Electric Bicycle front Wheel has a 100mm dropout and includes a Motor Controller, controller box, pedal assist crank sensor, and one pair of brake handles. The battery is not included.
👤I put the hub on the rim that matches the rear rim of my bike. The rim on my bike is larger than the one that comes with it. I installed the hub, controller and battery myself after ordering new spokes. I used a 36V battery. I didn't install everything in the package because I didn't want the bike to look like an electric bike. I only installed the screen and throttle. I have less wires on my bike. The motor makes a weird sound when I start, but it goes away when I get moving, I'm not sure what the sound is, being that I just finished and only rode it once. It was very easy to build a new wheel with the electric hub. I feel bad for people. People have a hard time doing things. If you can't install a screen protectors on your phone, you won't be able to convert your bike into an E-bike.
👤The conversion kit was delivered 2 days earlier than I expected. That part was good. I have no complaints about the components so far. Don't expect much help with the instructions. I tried the setup before mounting the components. I connected the wiring to the bike after mounting the display, brake levers, throttle and other items. It won't work now. The display is showing an error that means motor failure. The setup was redid with the "learn" wires connected. It seemed to work again at that point. After getting out of setup, I tried again, but nothing. Kunray says there is a video about the installation on Youtube. I can't find a video like that. It doesn't work so far. I'm going to contact the vendor to get more information on the instructions. There is more to come. On the day I wrote the review, I sent 3 emails to the vendor, but they have not responded. I made more attempts to get the system to work. The motor will work at the 5 levels of pedal assist if I leave the learning wires connected. The motor stops working when the brakes are applied, the pedal sensor is not functioning, and the throttle is not working. The controller is bad. There is a The motor is very weak. The maximum speed achieved at the level 5 pedal assist is 10.4 mph, with no load, if you lift the rear wheel with the bike stationary and turn on the motor. I will not purchase from this vendor again.
👤The instructions are not usable. I got my kit working after some trial and error. I would recommend this build. My build is on a TREK mtb. The 48v 13ah battery has no issues. The range is 30 miles per charge and the average speed is 20mph. Nice! Good idea to have some experience in this field. I wouldn't recommend this for a first time build.
👤I've taken it out on the road about 6 times so far and I'm happy with it. It wasn't given instructions and had to watch a video that was vague in some areas, but eventually got it figured out and worked on my bike. 2. The digital controller went blank when I took it for my longest ride because the battery had 30% left. I disconnected the battery and the controller blanked for about 1/2 mile. I don't know why. Good news 1. I was able to go up to 28 miles an hour. 2. It was quite a few. It does not restrain peddling without it. I'm happy with it so far, except for #2 which I have to figure out why it shut down.
The product has a 12 months warranty. Please contact them first if you have any questions. They can help you solve the problem. You can start the engine with pulling.
👤I was sent a CDHPOWER brand one with weaker pawls and springs than the one I received. I like the construction of the one I received. I will update with how this goes. It is a good thing that Amazon has a flexible return policy. If it breaks, I will get unlimited replacements.
👤It works well, but I got tore up after 4 rides because of the white platic disc on the inside.
👤The concept is there, but the materials and construction are not, these are the ones that will work for about a month tops if you're lucky. Anything less than a nylon or steel coil will snap under repeated stress.
👤I had no issues installing the pull cord. Sits too far out for standard pedals. The pull cord snapped and the case broke in half after 1 week. Spending a little more for a better part would be a good idea.
👤This thing will not bolt on properly without rubbing and The Recoil line is a no-go because of that issue, they need to have a beer and figure out what the minor issues that contribute to a no use deal other than that built well may have.
👤Two of the pull starters broke after the window closed. The 3rd one is holding up, but it doesn't like to catch. You can find better ones for less than $20.
👤The ad is not what you get. The part was ordered from a different merchant and broke within two pulls. It's not what was expected of it.
👤The rope failed on the first start, so I would not recommend it.
The 44T sprocket and 2L gas tank are standard. The KIPA Carburetor is a top quality replacement. 50cc 60cc 66cc. 70cc. 80cc 2-stroke Engine Motorized Bicycle Bike Pocket bike Scooter Quad ATV helps to keep your bikes and Scooter running at top performance. Specificaiton has a Manifold intake bore diameter of 19mm. The mounting diameter is 58mm. Important tip. The choke Manual requires you to push and twist your thumb to open it. You could find the information in the description. If you are confused, please message them. If you use this kit to replace For Centain pocket bike/ATVs/Scooters old carburetors, please make sure you match the structure, because there might not be enough space to install it. The package includes: 1 X New Carburetor, 1 X New Fuel Filter, 1 X Mounting Gasket, and 1 X Intake. You may need to tune it a little after installation even though it's well-tested and well-adjusted in the factory already. The Performance Carburetor is Durable and Stable. It is easy to install a perfect Carburetor for Powerful Bikes and ATVs. The Performance Carburetor is Durable and Stable. It is easy to install a perfect Carburetor for Powerful Bikes and ATVs.
👤If you don't tighten it, it will break at the neck. If you don't tighten good enough, it slips off the neck from the compression inside the motor. I've had three of them. They all did the same thing, it's not high performance, but there isn't anything special about this carburetor.
👤Put this on a dirt bike. The only problem was the length of the cable coming out of the end of the throttle cable was too short, had to rig it up by removing the chrome cable guide and putting the cable into the top of the plastic housing to make it long enough to reach the throttle slide. The jet that was already installed ran great and it started up on the first pull. I need a different cable for the x pro 50cc bike, but not sure which one would work.
👤Great little car! My son's 50cc pit bike was upgraded to a factory one. I put a boost bottle with it and it started pulling right away. It didn't take long to tune or install.
👤The vacuum honda autochoke doesn't work. I bought this because I was tired of fiddling with it and getting stranded, and boy does it work! Open it and check it for Ray MachINING. Can't stress that enough. When I want it to start on a 1984 honda aero 50, I never got stranded.
👤I added a lot of power to my 50cc pit bike and it all worked out.
Please check for the details and size to make sure this part will fit. A chain tensioner roller for a bike. A chain tensioner roller for a bike.
👤A few weeks ago the chain on my bike fell off. I ordered this one thinking it was a bolt from the roller. The roller was held on by a flathead bolt. It is more difficult to tighten a flat head than it is to tighten a hex head. There is a I might add that this one is no better than the stock because of the fall off from my last one. It was difficult to install the part because the holes were not straight. If you want to get better quality or performance out of this part, you should purchase a cheaper version.
👤Thank you for your kind words, I was working excellent, arrived early, exactly what the seller said.
👤The bolt in the middle is what I like the most.
👤I don't like these things. The pulley falls off. This one lasted two weeks.
👤The wheel didn't fit the chain.
👤Not as advertised. The only reason I purchased this was because the bolt that holds the pulley is round with a flat head slot and not a hexagonal head.
The item will take about 4-7 business days to be shipped from the US. You can convert almost any bicycle into a motor bike in no time at all. It can be mounted on any bicycle. You can get up to 200 mph and reach speeds of over 30 mph. The kit is easy to install and can be used for everyday transportation. There is a Rear-Wheel Side Mount Kit. The engine used in the kit has an automatic clutch. The engine used in the kit has an automatic clutch.
👤It's small and cool. The mini dirt bikes have 49cc pocket bikes. It works, but it doesn't seem to come with grease. Spacers might be needed to align the sprockets. Roll the bike while feeling tension, don't adjust the chain. The mounting plate bends very small. I will test it as time goes on. There will be updates later. It has a noticable jerk as I increase to 4,500rpm, but that's probably from chain tension and gears being fresh. Don't push too hard. Give it a month to change the grease and travel slowly, also pedal on rough terrain. Waiting for the next update. After 4 months, Update 2 still works.
👤The mounting process for a Honda gx35 engine on a 26 inch bike requires a lot of thought, as the mounting hardware given is not good enough to have it stable. If you want a stable segment, I would recommend a lot of l-brackets from your bike to the mount. The chain should be tight so that it doesn't come off while riding, and the 2 gears should be inline with each other. There is a There is no manual in the box, so you have to do it on your own. I think from bike berry that there are some similar videos on YouTube. The break levers work well if I put the throttle in replacement. There is a It's a pain to have it registered with the Department of Motor Vehicles in California. You would need more motorcycle parts and an engine that is new so that you don't have to have it smog tested. The process for a specially constructed bike is not very specific on the website of the Department of Motor Vehicles. I would recommend this for anyone who wants to do a project, but be aware that there are a lot of steps in the process.
👤The chain is cheap and was close to coming apart after a few miles.
👤The bicycle side mount is nice. Fast shipping.
👤I got rap parts back from someone else after I ordered Warehouse one.
If you have any questions, please feel free to contact them by email, they will solve it for you in the first time! Brand new and high-quality spark plugs. It is compatible with 49cc-80cc 2-Stroke Engine Motorized Bicycles. Their high-quality units are the exact replacement for many brands and models of mopeds, ATVs, bicycles and scooters. Just replace and ride again, it's easy to install. The package includes a coil. The aluminum exterior is to prevent rust. There are mounting parts. It is easy to start with thick copper wire. There is a spark plug. Improve concentration and ignition. Fast delivery and free shipping on high quality products from the USA warehouse. CncMOTOK give a return that is easy to return. Fast delivery and free shipping on high quality products from the USA warehouse. CncMOTOK give a return that is easy to return.
👤I put the package on immediately in the cold weather because I was impressed. I knew my bike had a big difference in performance before I took it for a test drive. Thank you for the part that made my problem go away. I've never seen a bike run so smooth. Thank you for a quick delivery and great parts, I'm building on my first one. I'm adding this on the first thing.
👤This won't work with a 49cc motor. You can take the ht lead off and replace the old one with a new one.
👤It works grate. If you pull the wire it will come out.
👤I couldn't return for a replacement coil because the project was started later than I wanted.
👤Good purchase. My bike is 5 mph faster. I love it!
👤The motorized bicycles need to be replaced with the engine kit because of the parts that come with it. Its worth it.
👤They did a good job and the guys have been treating me well.
👤I use this product on my bike, but it doesn't work anymore.
Please check as much as you can to make sure the item is the one you need. Heavy duty industrial use chain links/locks and half links. The gas engine motor kit is compatible with the 415 chain. The package includes chain half locks. AMSHMZ0165 is part number.
There could be some scratches on the surface of the item. Please understand. The pull start starter can be used for 49cc/ 50cc/ 60cc. 66cc/ 70cc/80cc. Two-stroke engine motorized bicycles are assured to use. The alloy starter is made of high quality aluminum alloy material, which have high reliability, anti-corrosion, wear resistance, sturdy, not easy cracked, can be used for a long time. Brand new high quality aluminum alloy starter is fully tested to ensure the best quality before shipment, safe to use. The aluminum pull starter is easy to install and can be replaced directly. If you have any questions after you receive their products, please contact them, they will try to solve your problem. If you have any questions after you receive their products, please contact them, they will try to solve your problem.
👤The product arrived in perfect condition.
Bicycle motor kit 49cc products from Huri. In this article about bicycle motor kit 49cc you can see why people choose the product. Jrl and Acouto are also good brands to look for when you are finding bicycle motor kit 49cc.
Huri, Jrl and Acouto are some of the best brands that chosen by people for bicycle motor kit 49cc. Find the detail in this article. Kunray, Donsp1986 and Kipa are also brands that their products are worth to check.