Best Bicycle Mirrors for Handlebars Cruiser Bike

Handlebars 28 Sep 2022 10+ Comments Open

1. Rearview Adjustable Handlebar Universal Accessories

Rearview Adjustable Handlebar Universal Accessories

The frame is black and has anti-glare 50% and 75%. You can adjust the position of the bike mirror. The flexible tube can be used to provide a clear rear view. You can no longer be blocked by your arms and shoulder. Keeping yourself safe is an inexpensive solution. The rubber gasket helps to hold firmly. The bike rear view mirror will stay put even on bumpy roads once the adjustment is made. Fix the screw and you can ride. You can see a wider and clear vision with theIDER VIEW mirror. It's easy to see traffic coming up on you with this bike mirror. You can no longer see who is sneaking up on you. First of all, safety! The mirror for bike is easy to install, just tighten the handle bar. There is no need for tools. It is suitable for most bicycle, electric bike, E-bike, mountain bike, electric scooter, road bike, and touring bike. Before using the bicycle rear view mirror 2pack please remove the protective film. If you have a quality problem, please contact them. Before using the bicycle rear view mirror 2pack please remove the protective film. If you have a quality problem, please contact them.

Brand: Kemimoto

👤The mirror works as a mirror should, and gives you a functional view of anyone approaching on your left. The problem with this thing is that after a few bumps the clasp holding it to your handlebars loosens and it starts flopping all over the place. I want to see what is happening in my blind spot but not at the expense of stopping every half mile to get the mirror back.

👤I attached a mirror to my helmet. The larger mirror makes it easier to see vehicles approaching on your left, and the convex surface makes it safer to use. It's very stable and doesn't require much adjustment once it's set.

👤Even with the provided rubber pads, the mount won't tighten enough on the handlebars to hold the mirror.

👤Needed a mirror that would fit a handlebars. That's not much. Nice to see cars coming up.

👤The poduct was in good condition when it arrived. It was easy to install. I was able to see cars coming up behind me because of the mirror arm. The mirror helps with adjustment. I gave it 4 stars because the arm isn't long enough for my bike. I have to move my arm or head to see because my shoulder fills up most of the mirror. Sometimes I get it in a good position and sometimes it moves a little because of a bumps in the road.

👤If the vehicle has lights on, the mirrors are great to see what's coming up on you. The object is small because of the mirror's shape, so you don't notice it until you are behind it. They don't move on rough terrain.

👤I thought it was faulty because it was so stiff. It also stays put. There was no bouncing or sliding. I used the rubber because my handlebars weren't thick enough. I have a bike. The mirror makes objects look farther back than they really are, but I am just looking at traffic or other bicyclists, and I am aware of that. It should be explained to the child if they are using this. I would buy a new bike again.

👤Awesome mirror! I found this one after trying 2 other mirrors. I am very happy with it. Visibility and stability. There is a great rear view mirror for you to look at.

2. Newlight66 Adjustable Handlebar Motorcycle Black 2PC

Newlight66 Adjustable Handlebar Motorcycle Black 2PC

It is easy to install. Attach the mount with a rubber strap. In minutes, well mounted. Please confirm the purchase of the "TAGVO" to prevent copy/flaud. The bike mirror has a wide field of view for any viewing angle. It is easy to clean and it is weather resistant. The pole can be bent freely to help you watch every direction of your back. The gasket can be adjusted according to the size of the handlebar with the help of the required screws and non-slip gasket. The installation is complete. The bicycle mirror can be used for many purposes. Road Mountain Bike is a universal bike. Bike Mirrors are suitable for road bikes, mountain bikes, city bikes, and your bike. If you have a problem with their product, please contact them.

Brand: Newlight66

👤The bike mirrors are great. We had to return other mirrors because they don't have enough time to see past our own bodies. Our electric bikes have nice grips that won't fit in mirrors. Other people are moving their electronics further in towards the center so they can mount their mirrors. The stems are flexible and can be seen around me. The mirrors are great.

👤The mirrors have food in them. I was able to get them delivered within a week because they were affordable. They were easy to put on my bike and they are stable, so if you bumped them they will move out of position, but they go back easily. You can bend them to get the best view behind you. Although the mirrors were mounted, I was not able to see in the mirror behind me very well. The car was not clearly visible until it was 15 feet behind me. I wanted a mirror so I could see if a car was behind me. I can't see cars behind me until they are right up to me. The mirror makes things look farther away than they are. I want to see if I can see the cars long before they hit me.

👤I needed 2 of these for our bikes, but I needed ones that could be installed on handle-bars which could not be disassembled due to hand brakes and gears. These arrived without instructions. I studied them online before ordering them. They spread apart to go over the handle bars. If they are too big for your handle-bars, they have to make them fit your bike, but the spacers are hard to use. I used electrical tape and 4 letter words to get the spacers to work. I can use them with our bike cover because they are working well. I might not order them.

👤The mounting system is easy to install and the bubble swans look very nice. But... I'm not sure if it is me or something else, but I can't see anything behind me. I can't see my riding partner who is following me without moving my body to one side. They work well for a car coming up on your left, but I wish it was better. I tried to make a 3 inch extension for them, but it wouldn't help unless it was 3 feet long. I ordered a mirror that goes into the end of my handle bars so we can see how it works. The girl at the bike shop said the only thing that works is helmet mirrors. Back to the drawing board!

👤People who say these are easy to install are in a parallel universe. These are not easy to install because I am very handy. There are no instructions. The rubber strips fit next to the bars or between the mirror and the rigid spacer, so you have to figure that out on your own. You have to figure out which side of the rubber strip goes down. The strips are too long. They are infinitely variable, however the long flexible arm does vibrate as you ride. It is not bad. There is a You will like them once you get them on. If you want to mount quickly, look elsewhere.

3. Venzo Accessories Handlebar Anti Glare Reflector

Venzo Accessories Handlebar Anti Glare Reflector

The products are made in Taiwan and have passed an EU REACH test to make sure they are safe to use. A grade auto glass has a crystal clear finish. You will have a clear view. This makes riding safer. The lens has anti-glare silver. The anti-reflective coating eliminates glare. Only the Handlebar outer diameter 22.2mm is compatible. The mirror next to the grips should be moved to the center of the handlebars. Full angle adjustment is possible with a mirror head rotating and 45 joint swinging. The mirror can be locked quickly with the help of the steel screws. The base material is Eco-Friendly High Impact nylon with Fiber. The mirror is very solid and will last a long time. The mirror will not crack or break during downhill bike riding. You can order now and pay free. They can provide a 2-year warranty because they're so confident in their product quality. It was made in Taiwan.

Brand: Venzo

👤Great mirror! I bought this to replace a smaller one that was okay, but a little hard to see. I pulled this out of the box and it looked huge. I was going to return it because it looked bigger than the picture, but decided to give it a try. I loved it when I put it on my bike. Its size, shape, and stability make it perfect.

👤I have installed them on our bikes. They are made to last. They are too short, and you can't see the road. I bought the excellent MIRRcycle mirrors after returning these.

👤This is a very good safety equipment. It works perfectly on my Sondors XS. I have the right hand model so I can mount it this way. It's cost effective to keep you safe on the road.

👤I like my new mirror. It was easy to install and fit on my handlebars. That is a major accomplishment. It's big enough that it gives me a good view of what's happening behind me. I only have one mirror, which is on the left side, since I ride in the same direction as auto traffic while over in the bike lane. I highly recommend it.

👤The mirror design is both stylish and functional. Length can be extended to improve coverage. Even after a few jumps and bumpy rides, it holds firmly in place, because I mount it to my escooter. There is a The body is made of plastic. The base is very easy to install. I was very happy with the purchase.

👤I bought this for my son's bike. It is easy to attach, and has plenty of movement for viewing adjustment. I put a locktite on the bike because the screw holding it on the bike kept getting loose. We are happy with it.

👤It's easy to tighten and adjust for my ebike. There are lots of controls on the left. Without moving controls, it works. It got in the way if I had to put between hand grip and controls.

👤This has been working well. I need a mirror to see my baby in the trailer behind me and potential oncoming cars, as well as my bike. It was easy to install and I haven't noticed any glare so far.

👤The mirror was installed on the right hand side of my handle, just had to shift the gear to fit in. Too easy. The mirror didn't move or vibrate while cycling. It was perfect for rear and side views. I might get one for the left side of my bike. Excellent product and looks good too.

👤Good quality mirrors. It's easy to fit. Excellent value.

👤Just as described. It's easy to fit. Rear vision perfect. Very happy with the purchase.

👤It's a perfect item, easy to mount, and it's useful on the streets.

4. PACEARTH Blast Resistant Aluminum 360˚Rotatable Rearview

PACEARTH Blast Resistant Aluminum 360%CB%9ARotatable Rearview

The frame is black and silver. The bicycle mirrors are made of high-quality aluminum die casting materials which have good performance that won't get rusty or be corroded. The bicycle bar end mirrors have a blast-resistant and shockproof mirror with 3.07'' diameter, which gives you a wider field of view and a more stable image than in flat mirrors. Easy installation. The bike end mirrors fit inside the handlebars. Please measure it before you buy it. The rear view mirror can be mounted in minutes with the help of two sizes of Allen wrench. The bike bar end mirrors have a mirror on the left and mirror on the right side. There is a detailed installation video on the listing. You could follow their instructions. If you have any other problems, please contact them. They are here for you.

Brand: Pacearth

👤I was very impressed with the quality. All metal construction frame. The mirror is a little over 3 inches in diameter. I put a drill through a vent hole in the end of my bike's rubber grips to make it larger so the mount could be inserted. It is easy to install. I expected the price to be closer to $25 for the quality compared to other cheap plastic ones.

👤I wiped my left side in my cycle. The mirror had a few scratches but no real damage. The mirrors work well on 2 other cycles. There is a The mirrors are made of aluminum and STAINLESS and have good quality and no plastic. I measured the inside diameter of the handlebars before I ordered them. The inside of the bar was measured using a Mitutoyo inside a caliper. I thought I was good. I had to use a dead blow mallet to get the outer sleeve into the handlebar, it was a tight fit, and that's 3 human hairs, but that's a lot in the machinery world. This is where you need to pay attention. The mirror sleeve has a cone nut on it. If the little cone nut is facing the wrong way, it will be hard to get this mirror tight. The black arrow points at the correct cone nut orientation in my photo. There is a I needed a mini-impact driver to tighten the screw on my setup because the included wrench wouldn't work on my setup. There is a I'm really handy, have a ton of tools and have been pulling wrenches on bicycles, motorcycles and cars for 45+ years, and this was a simple project, but if you don't pay attention to the details, it could be a pain.

👤I will describe how they seem to me if I return them. There is a The first impression is that the main parts are made of aluminum. The jam-mechanism for the handlebars is made of aluminum, two shells that are not straight and a 5mm steel bolt. There is a The mirror is large. I was not satisfied with what I was able to do after having a bit of difficulty with the installation. The threaded parts are of mediocre quality and do not turn freely. The 4mm wrench was jammed in one of the bolts when I applied moderately heavy force. The amount of force required to get things to seat or lock up was excessive when I changed my wrench. It should not have been the case if the parts had been better. There is a To successfully tighten the bar-end anchor mechanism, it was necessary to generously lubricate the central bolt, expanding shells, and the inside of the handlebar. I couldn't establish a securely locked attachment. The anchor does not stay fully seated even after applying as much force as I could. There is a The mirror position is stable because of the two 4mm bolts that secure the part. The amount of force required to achieve and almost-but-not-quite stable state was all I could manage with standard hex wrenches, and seemed excessive in terms of being close to the force required to strip the threads in the aluminum parts. I am not a beginner with a bicycle. The package of two mirrors required an hour to be installed, which was further disappointment. It also included cutting a metal shim to help with stabilization. There are two mirror anchors. This should have taken 10 minutes. The mirror that I received today had a better quality design and manufacture than the one I received a few days ago, and it had less than 10 minutes to install. I'm not sure if I'll return them or accept them as-is. Prospective buyers might want to keep these observations in mind.

5. Hafny Automotive Shatterproof Adjustable HF M900LB FR04

Hafny Automotive Shatterproof Adjustable HF M900LB FR04

The entire adjustment is FULL ANGULAR. The bike mirror is built to rotation for maximum coverage. It is easy to adjust to your desired angle. The screw should be fastened after adjustment. It's called optical perfection and it's a glass that's shatter-proof to keep you safe on the ride. 180 adjusts to prevent crashes from the front and behind. WIDE RANGE FITTING is for the inside diameter of the MTB handlebar. It doesn't work for Trek grips and drop bars. There is a reason for this. The Universal Design can be installed on both the top and the bottom of the handlebars. Installation is easy with the 4&5mm key. The products were made in Taiwan and have been tested to make sure they are safe to use. The products were made in Taiwan and have been tested to make sure they are safe to use.

Brand: Hafny

👤It is not possible to align this thing to how I need it. There's no way to fix it because I'm stuck with it at an imperfect angle. There is a The mirror frame is attached to the mounting arm by a joint that rotates on one axis. The only angle you can adjust the mirror is the angle you mount the arm at. I have wide shoulders, so with the arm straight up I can adjust the angle of the mirror to see behind me. I pushed it as far forward as I could to see around my own arm, but the mirror sits on a kind of diagonal now, and that leaves me with odd blind spots. I can see trees above the left lane, but not the cars. There is a If you can't or don't want to mount the arm straight up, you will be unable to see the road behind you. There is a The mount is solid. The mirror is clear and smooth, but the adjustment isn't perfect and the styling is weird.

👤My e-bike has the same attachment device. They both used an expansion device. I wasn't sure if it would work but it did and both had the same bolt and thread size. The expansion device was removed from the mirror mount and I used the longer bolts. It was easy to attach.

👤It's easy to install. The cap is Pip. Put the slide in and tighten it. It was easy.

👤The installation is easy, but the touch moves them.

👤I liked the way it looked.

👤I'm sticking with the one I've tried before. The design and shape of my bike is perfect. The large viewing area of the mirror makes it easy to see the images. The glass does well against glare. The length of the main arm was something I wished was different. I would have liked it more. It would have been better to shorten it to keep it closer to the bike. I think it makes it look a little funny. It would be nice to include two lengths.

6. DRCK HROS Adjustable Shockproof Motorcycle

DRCK HROS Adjustable Shockproof Motorcycle

This bicycle phone holder is compatible with all sizes of phones. The mirror is made of black plastic and can be adjusted. They can use it for most Mountain bike Handlebar. The install tool follows. The package is called the mirror package. There is a suitable handlebar diameter from 0.87-1.26 inch. They suggest 0.87-1.05inch, which will be better. The mirror support tube is plastic with aluminum and can be bent for what you want. Customer can return after sale and get a refund. You have no risk in trying to purchase.

Brand: Drckhros

👤The mounting system is very easy to use. There are two different sets of bolts for different size bicycle bars and a small Allen key wrench included. Bolts seem to be of good quality and will not rust quickly or ever. I put this on my Profile Design Aero Bar. I used a strip of old inner tube wrapped around the bar to fit on the mirror clamp to'shim' under the mounting clamp as this gives a better fit for holding in place without over tightening. The mirror is acceptable. If someone can't see a car approaching behind them, they have vision issues, not mirror issues. The design of the mirror is attractive, but the size of the mirror is about the size of a hardball baseball, which is a pity. The metal covered flexible shaft is good for bending to adjust and hold in place. Some reviews said that the image in the mirror was vibrating. It is not a problem. The mirror was detached from the frame when it arrived. The mirror is held into the frame by flexing it to be more spherical and then attaching the edges to the frame with little peg protrusions. When one releases the plastic, the mirror stays attached to the 3 frame pegs. This doesn't work. I put a drop of "Original Super Glue" on top of the little peg protrusions and glue the mirror into the frame. I did this in a way that didn't damage the mirror's look and didn't detract from it. The plastic materials on a child's bike would break very quickly, and it was a little fragile. I don't think the fragileness of the plastic is a problem for an adult. The problem is that one tends to adjust the mirror by twisting or bending the flexible extension between the mirror and the handlebars. I think this would break the mirror plastic off the flexible shaft or the handlebar mount, which is cheap and brittle. When adjusting the mirror by twisting or bending the shaft, the solution is to always remember to hold the flexible shaft. This works well. I bought another one for my bike. I only used this mirror for a week, so if it explodes or something, I will change this review.

👤I bought this for my wife. Works well. Even though we have flat type handlebars, I can see past my arm because it reaches far. People complain about how hard it is to install. My first attempt didn't go well, but I remembered the old trick my dad taught me. Put a wade of paper in the nut holes on the bottom brackets to hold them in place. Assembly went pretty easy after that, because that did it for me. It's good for the size of the mirror.

👤It fit perfectly. It was what I wanted.

👤Sturdy construction is the good. It's easy to mount. There is a The bad. The mirror is too small. I couldn't make out my wife riding the bike behind me. There is a Cars and trucks are too small. You might not take the danger seriously. Would not buy again. It was too much of a hassle to come back.

7. SENQI Vintage Bicycle Permanent Stainless

SENQI Vintage Bicycle Permanent Stainless

This value pack of great bike accessories will turn your bike into the talk of town. The mirror for the bike has a wide view. The mirror is made of high strength material. It is easy to clean. The dimensions are 22.2mm in diameter and the mirror is the same size. Steel plated brackets. A mirror base with a pair. It's ideal for Road bikes, Mountain bikes, E- bikes, hybrid bikes, City bikes.

Brand: Senqi

👤I tried these after ordering 4 other brands of mirrors. I immediately fell in love with my wife's Schwinn Wayfarer, and ordered another set on Amazon, and left a review. There is a They are the perfect size mirror. The construction is very strong, the clamps are heavy-duty, and the vintage look is cool. In a world where very few bicycle mirrors are more than 4-stars, these have earned my approval. These are not for people who want to lose weight for their bike. They are strong. These aren't for you if you want to make your mountain bike cooler. They will add 20 years to your age. Don't hesitate to purchase these if you want to outfit your car with a mirror that will let you see behind you. There is a The mechanism in these mirrors is stiff enough to hold up to any wind, and could be used on motorcycles, quads, and go-carts without fear of vibration compromising the alignment.

👤It is. Will. Not. Move. Which is good. They're not supposed to move, but they're solid, and the best pair of mirrors I've bought for a bicycle. I'm surprised they aren't more popular, they look bulky but they work. I bought it for my motorized bike and it's quite heavy for long-distance bikers. It's as solid as a rock. Would recommend.

👤Excellent, well made, very sturdy.

8. Zacro Bike Mirror Adjustable Handlebar

Zacro Bike Mirror Adjustable Handlebar

The handlebar is mirror style. The wide angle lens is 3.3in in diameter and can provide you with a clearer view. You don't have to turn around to see the road behind the mirror. The rear view mirror can be adjusted to any angle, and it has a mirror that is rotatable. Their bike mirror is made of a material that is stable and shockproof. It is easy to install and remove the mirror with the help of the install wrench and screws. You can watch the video to learn how to install the mirror. The bicycle mirror is ideal for a wide range of bikes. There is attention. The bike mirror is only suitable for handlebars from 22-32mm. The bicycle mirror is ideal for a wide range of bikes. There is attention. The bike mirror is only suitable for handlebars from 22-32mm.

Brand: Zacro

👤I mounted it on my escooter and it worked for a week, then it shook loose and I had to adjust it. I had to re-tighten the screws because the screw hole broke into pieces.

👤They are flexible, so they can bounce back if you hit them. There are two problems. The mirror is too curved, making it hard to see small objects behind you. I will put a mirror on it. There are two They don't have a mount for larger-than-bicycle handlebars. I had to drill holes and put mine in my front basket.

👤I like the mirror. The price is a good thing. The nuts and bolts are small and my fingers aren't dainty so it's a little rough to install. It has amazing stability. It also has the ability to do a small lens adjustment in the housing, so you can just touch it to move it a small bit, without having to grab and bend the whole thing.

👤This mirror would be great, except for the fact that the images in the mirror appear far away than they really are. This is a very important issue. You can hear the vehicle as it approaches to pass you, but you can't see it in the mirror. They sneak up on you. The mirror is fine in every other way, so it is disappointing. Installation is easy, no issues have been mentioned here. Adequate size. The mirror can be adjusted for fine tuning. Flex tube is easy to adjust and retain its position. Unfortunately, this design will be returned and I will try again.

👤I like the mirror. Due to the set-up of my handlebars, it's not possible to see the left side of my bike. I feel more confident with it when I'm riding on busy streets. The mirror popped out of its frame while I was installing it to my bike and I lowered my rating. The mirror wouldn't come back in or the mirror frame wouldn't be the same. The mirror frame was secured with the use of velcro tape. I've been on a lot of rides and the mirror has been held securely by the velcro.

👤The arm would be a five star review, but it isn't long enough for most people. If would work well for kids or people who are smaller than me. For a big guy like me, it's hard to see around myself. If the arm was a few inches longer, it might be okay, but then the shakiness kicks in.

👤I tightened it again and the screws were stripped because it wouldn't stop wobbling. I've been working on bikes. I have never had a screw strip that was easy to use. The plastic is stronger than the screws. The screws popped off when I twisted and jammed the screw driver. I can still save it, but it's really messed up. Should have bigger screws.

👤The seller contacted me after I had problems with the mirror. I was very impressed with the effort they made to make it right.

9. Hafny Handlebar Stainless Rearview HF MR080

Hafny Handlebar Stainless Rearview HF MR080

Before placing an order, make sure you fit your bike. The left application is ideal for the flat bar. The mirror lens is made ofstainless steel. The Outside Diameter FLAT Handlebar is 2126mm. There is a viewing angle. It was made in Taiwan. Eco friendly with nylon and fiber.

Brand: Hafny

👤The mirror is well constructed. It's easy to install on my bike. The mirror was next to the handle grip so I had to slide the shift over. I tightened the screw on the mirror after I adjusted it. This is a bike. I like the size. The new position of the brake and the shift is easy to adjust to.

👤The company/supplier gave a nice thank you. It was easy to install. There is a I put the mirror next to the handlebars with the short lever on my bike. Half of the image in the mirror is my arm because of that mounting position. I haven't tried to put it under the handlebars. The view picture behind is smaller than I would like. There is a The image is not smooth as glass but it is a little distorted. The mirror bounces around a lot when it's on a curved plastic arm. I have had mirrors break when my bike fell over, so the steel reflector should be a good thing. There is a It's better than nothing as a safety device. If you really want to see what's behind you, you have to look. The mirror will tell you if it's safe to do so.

👤I was trying to find a bike mirror that would work for our bikes. I had thought that the mirror would only show my arm. The Hafny mirrors could be mounted below the handlebars. I didn't like the under the handlebar mount at all, and found that they work very well above the handlebars. The photo is close but hard to get a camera shot of. My arm is in about 1/3 of the mirror looking back, which is fine for knowing what's coming up on you. In a few miles of riding, I shifted my arm just a couple of inches as I looked back, giving me a full view. The mirror seems to be stable. We have a couple of cobblestone streets which I usually avoid, but I have ridden a block or two and the mirror has not moved. There is a I can't imagine a bike mirror performing any better than it does on our gravel trails. I am very pleased with the mirrors.

👤I use the mirror on my bicycle. The material quality and construction is good, and the shape provides a good field of view. The model is still in the middle of the flexibility range despite the curved arm. Not every adjustment point can be tightened to make it easier to bend. Mid-ride adjustments are required due to the mirror moving. There are mirrors out there that allow for tighter bend points. Scooter handle bars are further from the rider and don't suffer from this issue as much as the bike mirrors, because they don't stick out far enough to see around the body. The mirror is larger but still not able to see directly behind you and to the side at the same time, because of your body blocking half the view. The end bar mirrors don't have this problem. The quality of construction and design is good, but only 3 stars because you can't tighten the joints and I can't use the mirror due to random movement mid-ride.

10. Hafny Handlebar Mirror Blast Resistant HF MR088LS

Hafny Handlebar Mirror Blast Resistant HF MR088LS

The Handlebar Bike mirror is HD. Car used safe glass lens is blast-resistant. The aluminum black ED black Clamp is Eco-friendly. The new mallet! It's a fit for the Outside Diameter MTB and Cruiser Handlebar. Safe at Night, Reflector on the Back. The Allen Key is made in Taiwan. The Allen Key is made in Taiwan.

Brand: Hafny

👤The mirror looks good on my bike and provides a useful view of the road and traffic behind me. I had to use the provided shim to install it below my mtb handlebars because my forearm would have blocked the view behind me. The installation took a bit of time, as the pieces were held together while the screw was inserted. I dropped the mirror on a concrete surface to show the strength of the glass. I was concerned about cracking the plastic, but didn't have any problems, because it took 888-349-8884 I might give this a 4.5 star rating, because it really checks a lot of boxes. It would need a larger mirror and longer arm to get five stars. It seems to be a good product at a good price.

👤The screw was small. There is a factory defect. Had to return it. Requested a new one. Hopefully the replacement is good. The box was not sealed. The first mirror was replaced with another one. I bought the same type left hand mirror and had no issues attaching it to my bike. I assumed this one would be the same quality since it's different. I wish it worked the same way as the left hand, but it seems there is a problem with the screw mechanism. I returned it for a refund.

👤This bike mirror is great. Very well constructed, looks smart, and competitively priced. The design of the mirror makes it possible for it to be placed close to the handlebars. It can be installed above or below the handlebars. Even over the punishing trails that I like to explore, the easy to install clamp is still in place. It is not necessary on the trails, but it is a relief to be able to see cars approaching from behind. A must-have for safety.

👤The mirror allows you to see what is happening behind you. Its image is clear and sharp. If you can get it on the handlebars, your body won't block your view. When I moved the bell inward, I was able to move the mirror outward. You only need to do it once.

👤I have Hafny mirrors for my family's bikes and they are very good. There were no complaints there. I just got a flat bar road bike and bought a mirror for it. I would have used Hafny's bar end mirror, but my handlebars are not open round. I thought this one would be a good choice. I tried to mount it like a traditional above-the-bar mirror, but my arm and shoulder got in the way of the view. I'm not happy with the result of the mount under the bar. My position on the bike is so perfect that my eyes are behind the handlebars. The glass part of the mirror needs to be at a 45 degree angle. This reduces the size of the mirror picture. If you tip it away from you at 45deg, you'll understand. When I look down at the mirror, I get a view of what is behind me. I have to lift my wrist to get a better view because the only position I can get it in is most useful. The mirror under the bar is one of the last things to consider. On warm days, sweat drips on my forearm because it is still over the mirror. There is a It would help if the arm that holds the mirror to the handlbars was flexible.

11. LX LERMX Mountain Adjustable Rotatable

LX LERMX Mountain Adjustable Rotatable

Your safety first, this unique bike rearview mirror is designed to give you clear visuals of the road conditions behind you to help keep you safe from road accidents. The entire adjustment is FULL ANGULAR. The bike mirrors are built to rotation for maximum coverage. It is easy to adjust to your desired angle. The screw should be fastened after adjustment. Long arm for better coverage. The long arm made of aluminum alloy is safe and protects the better horizon. The handlebars are 22.2mm. The mirror is protected against breakage due to some slight bumps with the help of the optical frame and aluminum alloy. They will take prompt responsibility of any complaints and will give you a full refund within 30 days of purchase. They will take prompt responsibility of any complaints and will give you a full refund within 30 days of purchase.

Brand: Lx Lermx

👤Initial impressions are ok. I get some ride time to see how they hold up. These are going on a motorized beach cruiser that is more demanding than a normal peddle only bicycle. There is a There are pros. Good. The stem mounting bolt is too short to install as pictured, and the nut is too thick. If the pictures show, only 2 threads thread on the bolt. I promise they won't last if that's how it is installed. Instead, I am threading them into the mount with the bolt above the brackets to use as a set bolt and loctite in the threads. Attach the nut to the mount with a screw and tighten the nut on the mount. One review has pictures of the mounting method, but they did not say if they are using any thread. You will see why I recommend the locker. Since the diamond shape is not flat against the base, this method gives more clearance to adjust the vertical tilt of the arm. The handlebar is small and thin. Since it is thin, it will likely rotate on the bar. Since they are small, not much of the bolts will fit through to the other side, leaving me questioning the robustness of the installation. I am worried that they will back off since there are lots of loctite going on here. I would like to get longer bolts. They will not work on a handlebar with tubing that is wider than standard. It seems like the threads were made with wide tolerances typical of Chinese products. If you thread the stem into the mount without the bolt, you can feel the gap between the mount threads and the stem bolt threads. Loctite will be essential to prevent it from vibrating out, and I can see the ball sockets backing out over time, so loctite those too. There are notes. Many of the poor reviews are about rearward visibility. It is important to note that these are side machetes. There is no such thing as a rearview mirror on a motorcycle since you would need a mirror in front and over your head. I own three different bikes and have used many different bike mirrors, but you will never see directly behind me on a bike. There is a Loctite is needed for Chinese parts like this. Everywhere. If you want the mount to be permanant, I used red on the stem bolt since I don't mind if the arm and mount are used. Refer to the picture.

👤I bought these mirrors despite the negative feedback I've read. The threads weren't long enough for the nut was the complaint I read. I was able to overcome this by using the mirror and the round knob to tighten the male screw into the female mount. I needed a lot of threads to tighten the nut. I wanted to mount these on top of my bars, but the position gave me a poor view of my arm and not much of the road behind me. I hung them upside down because I swapped the right and left. This works well. This gives me a great view of the road behind me when I look down at the mirrors. My knees will hit the mirrors in tight turns. I decided that I only want a mirror on the left side. The right mirror was left off. If I'm turning sharply to the left, I only have to watch out for my knee. This turned out to be doable. I've been using the mirrors for a while now. It was best to leave the mount on the bars tight, but not crazy tight. If I knock the mirror out of place, it will get knocked badly out of adjustment. I like the look of the mirrors on my bike and the large surface. It's possible to mount it beneath the bar to extend the angle of view. The mirror gives a great view. I have a great view of two lanes of traffic when it is turned mostly horizontally.


What is the best product for bicycle mirrors for handlebars cruiser bike?

Bicycle mirrors for handlebars cruiser bike products from Kemimoto. In this article about bicycle mirrors for handlebars cruiser bike you can see why people choose the product. Newlight66 and Venzo are also good brands to look for when you are finding bicycle mirrors for handlebars cruiser bike.

What are the best brands for bicycle mirrors for handlebars cruiser bike?

Kemimoto, Newlight66 and Venzo are some of the best brands that chosen by people for bicycle mirrors for handlebars cruiser bike. Find the detail in this article. Pacearth, Hafny and Drckhros are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to