Best Bicycle Mirror Helmet

Mirror 14 Aug 2022 10+ Comments Open

1. Scratch Resistant Adjustable Rearview Hnadlebars

Scratch Resistant Adjustable Rearview Hnadlebars

It can be used for handlebars with a diameter of 25mm. It can be used for 22.2mm handlebars. They can use it for leisure bike handlebars. Their bicycle rear view mirror can be adjusted to any angle, without blind spots in the line of sight. The safe long arm makes riding safer because it ensures better coverage of the field of vision. Installation stability is achieved by the hard plastic support and aluminum alloy base. The mirror can be used for a long time because of the sturdy structure. The mirror won't crack or break even during downhill riding. It is very easy to install, they have nuts to lock them in place. You can have a better view behind you if you adjust the mirror.

Brand: Rbrl

👤Terrible. The mirror wouldn't work for a Tri-Cycle. Not long enough to see over my shoulder. It is cheap made.

👤It wasn't long enough to be able to see behind me. My handlebars are not long. Maybe that is why. I tried on my mountain bike, but I couldn't see how this could work on a beach cruiser or low rider. And it kept moving. I returned it.

👤The mirror is large and well made. If the arm was about 2 inches longer, I would have liked it. I have to move out of the way to see behind me because I get a great view of my shoulder.

👤The mirror on my handle bar has a screw on the bottom that screws into the factory slot on my scooter. It works perfect!

👤I wanted side mirrors for my wife as it was more like riding a scooter or small motorcycle than a e bike. I was tempted to buy the mirrors on the website, but I decided against it. These seem to be almost the same for $29.99 with free prime shipping. The mirror parts are slightly different as they are shorter. The arm extensions seem to be the same.

👤The mirror is helpful on the road. I can't imagine riding a bike without a mirror. The mirror will move if there is a strong wind. It is easy to get it back to its original position.

👤The mirror was easy to attach, though it shakes a bit when riding on rough terrain. I would like it to be an inch or two longer so that I could see over my left shoulder.

👤The mirror is shaking because of the stand that is attached to the handle bars. It's hard to see anything in the mirror. I tried to tighten it. I gave it 2 stars because it looks like a listing, but it is almost useless.

👤This is for the left side, but not for the right side. The parts need to be re-presented on Amazon. There is a There is a message for sellers. What do I need for the right side? There is a I would use the mirror if I could get another side.

2. Hafny Handlebar Mirror Blast Resistant HF MR095

Hafny Handlebar Mirror Blast Resistant HF MR095

3 straps are firm enough to hold up on the bike, 1 strap on the front and 1 strap on the upper bottom can be used to fix the bag on the head tube. The bag wouldn't move if you rode on a bumpy road. The Handlebar Bike mirror is blast- resistant. The glass lens is safe. The aluminum black ED black Clamp is Eco-friendly. The new mallet! It's a fit for the Outside Diameter MTB and Cruiser Handlebar. The back is printed with a safe at night. The 5mm key is made in Taiwan.

Brand: Hafny

👤I would like to thank the Australian who suggested that the right mirror be mounted upside down on the left handlebars. Don't worry. There are objects in the mirror.

👤I don't know how people ride bikes without mirrors, but being able to see cars behind me while riding gives me peace of mind. This one has a good field of view without being too large. I have only had to re-tighten the mirror once in the month since I got it, because my commute is on a bumpy gravel road. There is a I've not run into any issues using the correct side mounted underneath if you buy the opposite side mirror.

👤The blue antiglare is too strong. I have both of them. It's hard to see anything in the mirror if you go into a shaded area. I never had a glare issue with the standard one. I thought this would be an upgrade. It wasn't.

👤The mirror is great. I used left-hand-side one when I was in the USA, and bought a rhs version to add, now that I am back in Australia. Elbows are always in the line of sight. I mounted the lhs one on the rhs side of the bike to go underneath the hand grip. This gives a clear line-of- sight for upright riding position on an e-bike. If you want to upright position your e-bike, you should put the opposite side of the handlebars on the underside. The mirror gives a better view of what's behind it. It is easy to adjust while out riding, and if you do it on something, it will be easier.

👤The bike mirror is very good. It was sleek and discreet. I mounted the bars with the grips. The view is perfect. The non-glare version is what I have. It looks good on the All City Macho Flat Bar. You need an Allen wrench.

👤Highly functional, lightweight, sleek, modern and low profile. It is easy to install an excellent mirror with only a U.S. Allen wrench. The manufacturer says the mount work only with 22.2mm handle bars. The hardware that is prackaged is also true. I bought a set of M6 - 1.00 x 30 screws at a cost of $2.14 at Lowe's and installed the mirrors on my mountain bike handle bar. The screws are the same size as the ones that come with the mirrors, but a bit longer. You can install the mirrors on your handlebars if they are a bit wider.

👤The bike has small tires and the streets are bumpy. There are a few pot holes in the area. I don't notice the bumps, but this mirror definitely did. I'm not saying it is just with this one, but in general, these types with multiple joints, etc. They have the same weakness, and any hard contact with the terrain will likely mis align the mirror from your original setting. I was afraid I would break the thing since it's not metal, but I had to pull over every block to reset the mirror angle. I'll keep my helmet mirror.

3. Handlebar Bicycle Rearview Adjustable Mountain

Handlebar Bicycle Rearview Adjustable Mountain

There are tips. Please remove the protective film before using it to protect the mirror lens. Thank you! The HD mirror is called the Convex Mirror. The two bicycle mirrors in the package are made of a mirror that has a large field of view, stable image, and a longer service life than traditional glass mirrors. The rotation is at a full degree. The bicycle rearview mirror can be installed on the end of the handlebars to give you a perfect angle of view and ensure safe riding. The bicycle mirror has a nylon frame body and a flexible and durable aluminum fixture. The folding design makes it shockproof. This bicycle mirror is compatible with a wide range of bikes, including road bikes, mountain bikes, city bikes, electric bikes, etc. It's easy to install. There are two 5mm and 6mm allen wrenches in the package. To fix the screw to the bicycle handlebars, use the wrench and tighten it.

Brand: Ruby-q

👤Not usable. Can't tell what's on. Could be something behind you.

👤The mirrors work as expected but they have a small connection to the handlebars which could break easily if bumped to hard. They work well when they are in a position.

4. Zacro Bike Mirror Adjustable Handlebar

Zacro Bike Mirror Adjustable Handlebar

The handlebar is mirror style. The wide angle lens is 3.3in in diameter and can provide you with a clearer view. You don't have to turn around to see the road behind the mirror. The rear view mirror can be adjusted to any angle, and it has a mirror that is rotatable. Their bike mirror is made of a material that is stable and shockproof. It is easy to install and remove the mirror with the help of the install wrench and screws. You can watch the video to learn how to install the mirror. The bicycle mirror is ideal for a wide range of bikes. There is attention. The bike mirror is only suitable for handlebars from 22-32mm. The bicycle mirror is ideal for a wide range of bikes. There is attention. The bike mirror is only suitable for handlebars from 22-32mm.

Brand: Zacro

👤I mounted it on my escooter and it worked for a week, then it shook loose and I had to adjust it. I had to re-tighten the screws because the screw hole broke into pieces.

👤They are flexible, so they can bounce back if you hit them. There are two problems. The mirror is too curved, making it hard to see small objects behind you. I will put a mirror on it. There are two They don't have a mount for larger-than-bicycle handlebars. I had to drill holes and put mine in my front basket.

👤I like the mirror. The price is a good thing. The nuts and bolts are small and my fingers aren't dainty so it's a little rough to install. It has amazing stability. It also has the ability to do a small lens adjustment in the housing, so you can just touch it to move it a small bit, without having to grab and bend the whole thing.

👤This mirror would be great, except for the fact that the images in the mirror appear far away than they really are. This is a very important issue. You can hear the vehicle as it approaches to pass you, but you can't see it in the mirror. They sneak up on you. The mirror is fine in every other way, so it is disappointing. Installation is easy, no issues have been mentioned here. Adequate size. The mirror can be adjusted for fine tuning. Flex tube is easy to adjust and retain its position. Unfortunately, this design will be returned and I will try again.

👤I like the mirror. Due to the set-up of my handlebars, it's not possible to see the left side of my bike. I feel more confident with it when I'm riding on busy streets. The mirror popped out of its frame while I was installing it to my bike and I lowered my rating. The mirror wouldn't come back in or the mirror frame wouldn't be the same. The mirror frame was secured with the use of velcro tape. I've been on a lot of rides and the mirror has been held securely by the velcro.

👤The arm would be a five star review, but it isn't long enough for most people. If would work well for kids or people who are smaller than me. For a big guy like me, it's hard to see around myself. If the arm was a few inches longer, it might be okay, but then the shakiness kicks in.

👤I tightened it again and the screws were stripped because it wouldn't stop wobbling. I've been working on bikes. I have never had a screw strip that was easy to use. The plastic is stronger than the screws. The screws popped off when I twisted and jammed the screw driver. I can still save it, but it's really messed up. Should have bigger screws.

👤The seller contacted me after I had problems with the mirror. I was very impressed with the effort they made to make it right.

5. Life Bicycle Degree Adjustable Rearview

Life Bicycle Degree Adjustable Rearview

Installation help and a warranty from the manufacturer. There is an important note. There will be a transparent protective film covering the mirror when you receive this product at your door. This is to make sure the mirror is clear. Before using the product, please take off the protective film. Attach your helmet in less than 60 seconds using an ultra-strong velcro pad. Line it up exactly where you want it, then lock in your preferred adjustment. The mirror stays in position if you lock it, so you don't have to worry about it vibrating. There are mounts on both sides with ease. A flat mirror with a crystal view helps you judge the distance of objects behind you much better than a curved mirror. You can use your peripheral vision to see everything behind you, while maintaining a clear view of the road ahead. The mirror is placed at a perfect distance in front of you so it stays steady even during bumpy rides. Even though it weighs just 12g, you will be pleasantly surprised by how sturdy the mirror is. The cycling mirror is made of strong materials and has a feather weight. 90 day money back guarantee and LIFETIME REPLACEMENT WARRANTY.

Brand: Life On Bicycle

👤I broke my rear view mirror and felt naked on the road. I ordered this one after reading the reviews. The stability of the arm is better because the morror is a bit larger than my old one. I love the way it works. I couldn't mount it on the inside because of the configuration of my helmet. The mount for the mirror fit into my helmet nicely because of the small hole on the side of my helmet. The helmet is curved there, so I drilled two small holes through the mirror mount and screwed it into place. It is in a perfect position. It is an excellent product, but your mounting experience may be different.

👤The arm is made of metal. It can bend to meet my helmet. I was very happy to see that the arm could be bent the way I wanted it to be, even though your mirror probably fits most cheap helmets right out of the box. See the picture! It stuck out too far to the left and too low without bending the arm. Thank you! I am a very happy cyclist.

👤The mirror was nice for a while. It was easy to install and has a nice clear mirror. The glue on the mirror fell off about two months after I started using it, I am a daily bicycle commuter. My helmet was torn off. I had to separate the velcro strips from each other in order to glue it back on. I tried to put it back on. It doesn't stick. I think I'll try to buy better glue and try again, but not hopeful so far. I'll have to look for another product if that doesn't work. There is a So not impressed. The company should figure out a better way to secure the mirror to the helmet. Maybe I got an item that fell through the cracks of quality control.

👤If your decision is whether buying something like this is worth it... This kind of product gives you the ability to know what's going on behind you, which is important for cycling. This is good, but not great if you are looking for the best product. I loved the Take A Look cycling eyeglass mirror for a long time, until I lost it. What makes a small thing nearly invisible makes it easy to lose. I think it's better than the one attached to your helmet, but it's bulkier, and it's useless. You have to use super glue for the helmet part of the velcro, because it's not strong enough to be put on and off.

👤I used the mirror to avoid dangerous situations, such as speeding cars and texting drivers. This mirror is the solution to all of this and more, as it allows you to partially steer your bike to the right to avoid a fatal pot hole, as well as to see if there is a car approaching to whip your head back to look front. There is a It takes a while to get used to but once you do, you're good to go.

6. Zefal 95293 Spy Bicycle Mirror

Zefal 95293 Spy Bicycle Mirror

There is a wide application. Most handlebars of conventional bicycles can be applied with a shockproof mirror. A mirror with multi position. Mounts are almost anywhere on a bike.

Brand: Zefal

👤I had this on my road bike. I've ridden this across the country twice. I have crashed on my mountain bike several times. It keeps on tickin'. Highly recommend this product. I can't ride without one. I have never had an issue with my bike moving around in the 6,000 miles of mountain bike trails I have ridden. This is a good piece of gear.

👤I have 5 bikes and one is hard to come by during a Pandemic. The new build has a cheap mirror. When I saw the length of this very capable looking strap, it was what sold me. Reviewers had posted pictures of it, but I had no idea how small it actually was. No matter how it is positioned, you can't see anything but your own body. I tried fork, frame, and bars. If you use bar ends, this could be attached to clear your torso. The strap is the highlight of this thing. It went over 31.8 bars. That's a challenge for sure. These straps don't seem to take bar tape into account. Make straps long enough. It didn't seem to have any vibration when I looked at my left arm and torso. If it can't show me when a car is approaching, it's useless. The $20 price I paid was ridiculous as this does not have any better hardware or action than the $6 mirrors. It's all plastic. I found it difficult to adjust. I believed the mechanism for adjustment would have to be better. The most likely cost is $2.60 to manufacture. The $6 mirrors show me a clear view of the road behind and to the side, even though they vibrate and sometimes get in the way of my hand position. I would have gone that route if I had the ones I have, as they are currently unavailable and I would save the $20+ fee and return hassle.

👤I have been riding a bike for 45 years. The last time I rode was on the Great Bike Ride Across Iowa in 1975, at the age of 77. Things have changed. People used helmets less in 1975. Everyone does now. I was able to do head checks in 1975 because of my functioning neck. I have arthritis. I couldn't get used to the "take a look" mirror for three weeks. It severely restricted my vision, and it drove me crazy. I was able to try different places on the bike with this mirror, and I found one that worked. Hurrah. Without the helmet mirror, I was able to take a much clearer look at my surroundings. I recommend this mirror.

👤The smallest and least obtrusive mirror I could find was selected by me. I've tried a few that are larger and stick up. The smallness of the spy can be a problem if you mount it in a way that is hard to see. The most convenient location for me was when mounted on the fork. The best location for me on my mountain bike is on the left side just above the horizontal grip. The smallness is not an issue because it is close to my head and my left hand and arm don't get in the way. I will try to post a picture with the others on the main page.

7. Tiger Eye Bicycle Helmet Reflective

Tiger Eye Bicycle Helmet Reflective

The rear view mirror on the handlebars can be mounted on both sides and is suitable for all conventional bicycle handlebars. They sell a single package. You need to order two to install left and right. The Tiger Eye Helmet Mount Mrrflector has a mirror on it.

Brand: Tiger Eye

👤I don't ride a bike without a tiger eye on my helmet. The rear view is very good. The mirror is likely to rust from being touched with a sweaty hand. The rear view is gone before the mirror is rusted. There is a need for a redesign to eliminate rusting.

👤The process of mounting is difficult. The video on their website is not clear. The wire is hard to bend. I secured it with a zip tie after I got it in place. Let's face it, it's a mirror now that it's in place. It does what mirrors do. The ease of attaching and adjusting is something that should be simpler for me.

👤I've owned 2 of these over the past 20 years. I lost one and the other bit the dust. I was very happy to find these on Amazon. They are great to work for. I attach my helmets to my body. I use a zip tie to keep it out of harms way.

👤This is the best helmet mirror on the market. It was well made.

👤This mirror is very durable and works very well, I really like it. I won't ride without it.

👤Happy overall, but be aware, mirror cracks in cold weather, happened to mine on cold weather ride, ordered another one, this is something not mentioned prior to purchase. I don't think it's right that Tiger Eye doesn't have a way to contact them directly.

👤It fits on the helmet very well.

8. Newlight66 Adjustable Handlebar Motorcycle Black 2PC

Newlight66 Adjustable Handlebar Motorcycle Black 2PC

It is easy to install. Attach the mount with a rubber strap. In minutes, well mounted. Please confirm the purchase of the "TAGVO" to prevent copy/flaud. The bike mirror has a wide field of view for any viewing angle. It is easy to clean and it is weather resistant. The pole can be bent freely to help you watch every direction of your back. The gasket can be adjusted according to the size of the handlebar with the help of the required screws and non-slip gasket. The installation is complete. The bicycle mirror can be used for many purposes. Road Mountain Bike is a universal bike. Bike Mirrors are suitable for road bikes, mountain bikes, city bikes, and your bike. If you have a problem with their product, please contact them.

Brand: Newlight66

👤The bike mirrors are great. We had to return other mirrors because they don't have enough time to see past our own bodies. Our electric bikes have nice grips that won't fit in mirrors. Other people are moving their electronics further in towards the center so they can mount their mirrors. The stems are flexible and can be seen around me. The mirrors are great.

👤The mirrors have food in them. I was able to get them delivered within a week because they were affordable. They were easy to put on my bike and they are stable, so if you bumped them they will move out of position, but they go back easily. You can bend them to get the best view behind you. Although the mirrors were mounted, I was not able to see in the mirror behind me very well. The car was not clearly visible until it was 15 feet behind me. I wanted a mirror so I could see if a car was behind me. I can't see cars behind me until they are right up to me. The mirror makes things look farther away than they are. I want to see if I can see the cars long before they hit me.

👤I needed 2 of these for our bikes, but I needed ones that could be installed on handle-bars which could not be disassembled due to hand brakes and gears. These arrived without instructions. I studied them online before ordering them. They spread apart to go over the handle bars. If they are too big for your handle-bars, they have to make them fit your bike, but the spacers are hard to use. I used electrical tape and 4 letter words to get the spacers to work. I can use them with our bike cover because they are working well. I might not order them.

👤The mounting system is easy to install and the bubble swans look very nice. But... I'm not sure if it is me or something else, but I can't see anything behind me. I can't see my riding partner who is following me without moving my body to one side. They work well for a car coming up on your left, but I wish it was better. I tried to make a 3 inch extension for them, but it wouldn't help unless it was 3 feet long. I ordered a mirror that goes into the end of my handle bars so we can see how it works. The girl at the bike shop said the only thing that works is helmet mirrors. Back to the drawing board!

👤People who say these are easy to install are in a parallel universe. These are not easy to install because I am very handy. There are no instructions. The rubber strips fit next to the bars or between the mirror and the rigid spacer, so you have to figure that out on your own. You have to figure out which side of the rubber strip goes down. The strips are too long. They are infinitely variable, however the long flexible arm does vibrate as you ride. It is not bad. There is a You will like them once you get them on. If you want to mount quickly, look elsewhere.

9. TEEZershop Handlebar 0 68 0 86 Adjustable Accessories

TEEZershop Handlebar 0 68 0 86 Adjustable Accessories

Before using the bicycle rear view mirror 2pack please remove the protective film. If you have a quality problem, please contact them. The tEEZershop bar end bike mirror has a shatter-proof lens that has a larger and clearer field of vision, with a line of sight of about 5m on each side. The surface of the material will not be easy to break. Quality products are what they want to provide to their customers. The handle has an upgraded PC material bracket which can be used outdoors for a long time, wear-resistant, anti-aging, high impact strength, and will not be easily broken. The rearview mirror can be mounted on your bicycle handlebars with the help of expansion screws and plugs. The Z-shaped plastic head screw accessories can be more flexible to adjust the tightness of the handle when riding, and then adjust the position of the mirror, which is convenient and quick to meet your needs. The product can be folded when the bicycle is against the wall, so that it can be used as a universal adjustment buckle. The inner diameter of the handlebars needs to be within the range of 17.4mm to be compatible with 90 percent of mountain bikes and bicycles. Before purchasing, please confirm that the product is suitable for your handlebars. Before using the plastic bicycle mirror, please remove the protective film. The tEEZershop bar end bike mirror is light and portable and easy to install. It can be stored in your bag without occupying any extra space. It is easy to install when you need to, just use the screws they included to fix the mirror on the handle, then replace the Z screws, and you can start riding! The tEEZershop bar end bike mirror is light and portable and easy to install. It can be stored in your bag without occupying any extra space. It is easy to install when you need to, just use the screws they included to fix the mirror on the handle, then replace the Z screws, and you can start riding!

Brand: Teezershop

10. Handlebar Bicycle Handlebars Accessories Mountain

Handlebar Bicycle Handlebars Accessories Mountain

The rear view mirror is suitable for most bicycles, mountain bikes, road bikes, ordinary bikes, MTB, electric scooter, E-bike and other types of bicycles with the bicycle handlebar diameter of 22mm-32mm. The rear view mirror for the bike is made of high quality auto glass to eliminate glare in normal environments and keep the view clear. The bar end bike mirror frame is made of nylon and is sturdy. Bike mirrors for the handlebar end fit inside the diameter of 18mm to 25mm. Bicycle mirrors for handlebars have a weight. It's a universal size for both the left and right bike mirrors. The degree of rotation is full. It has a wide field of view. You can adjust its angle as you please. Their bycicles accessories can help you watch your back and ensure your safety. The mirror is easy to install with the help of the screws. Perfect for road bikes, mountain bikes, city bikes. If you have an issue, please contact them via email. Perfect for road bikes, mountain bikes, city bikes. If you have an issue, please contact them via email.

Brand: Ges

👤My son has a trike scooter. The pictures on Amazon don't help. I don't think this is a good idea. I would like to return it.

👤It was difficult to install the mirror into my mountain bike. I had to force the mirror assembly to fit.

👤It worked out as expected. Thank you!

👤I've been using a helmet mount mirror for a long time. The field of view was too small as I got older. A friend told me about him and it was perfect.

👤This is the one! Game change for my confidence and no more flats for me. I have tried the wrist and helmet mirrors, and they introduced more risk because they were too67531 and needed to be adjusted often. Finally!

👤I thought this was a joke and had some film to peel it off, but it came with a different mirror and I can't believe they would send something like that.

👤The mirror is easy to install and works well when riding a bike.

👤Knowing what is behind you when making a left turn is a great safety feature.

11. Turnable Adjustable Accessories MTB Easy Recreation

Turnable Adjustable Accessories MTB Easy Recreation

Installation is hassle-free. Simply remove the cover from the bike mirror and position it where you want it. Mounts to both sides with ease. Bike mirror for helmet, bike mirror for cycling, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for motorcycle, bike mirror for It is made of high-quality material, clear mirror with anti-skid material, and it is easy to increase viewing angle and see more about the Rearview. The bicycle helmet mirror allows you to see traffic and other cyclists. It added the feeling of security to you. Easy installation. Their bicycle helmet mirror for adults and kids can be attached to your helmet in less than 60 seconds using an ultra-sturdy velcro pad. Line it up exactly where you need it, then lock in your adjustment. The reflect remains in function after it's locked so that you don't have to worry about it vibrating. The great safety companion. The mirror angle is adjusted to allow you to find the right place with a wide field of vision. It is a great companion for outdoor activities. A bike mirror for helmet is similar to a car rear view mirror. Their bike helmet mirror product is of the highest quality and standards. They will make sure that you get the best product. If you are not happy with their product. If there is a problem with the product, they will give you a full refund and exchange.

Brand: Ryders Recreation

👤I can't focus on anything in the mirror since it's blurry, and I can't transition from one eye to the other since I'm 48 years old. I can't see a car in the mirror until it's so close that I can hear it. I can see a car behind me if I turn my head, but a helmet mirror is needed to see cars behind me. This one doesn't. There is a The mirror makes the whole thing useless.

👤The mirror quality is not great. It is blurry and distorted. I got a mirror from another product. It is now functional. The ability to adjust is great.

👤It was very flimsy. Had to return it.

👤This is the best mirror I have ever owned. Five stars.

Summary

What is the best product for bicycle mirror helmet?

Bicycle mirror helmet products from Rbrl. In this article about bicycle mirror helmet you can see why people choose the product. Hafny and Ruby-q are also good brands to look for when you are finding bicycle mirror helmet.

What are the best brands for bicycle mirror helmet?

Rbrl, Hafny and Ruby-q are some of the best brands that chosen by people for bicycle mirror helmet. Find the detail in this article. Zacro, Life On Bicycle and Zefal are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com