A non-slip foot has an anti-skidding design to prevent it from sinking in mud. The kick-stand is made of strong aluminum. There is a push button that can adjust the height from 34 cm to 37 cm. It's suitable for more than 26'' mountain bike. The Double Leg Middle Stand is perfect for supporting heavy bikes. It's easy to hold the bike upright. What you get is a bike kickstand.
👤The kickstand was difficult to position after the allen wrench bolt was tightened. There is a I used the supplied locking washer after tightening the position bolt as tight as possible. I needed to work on my bike's brakes and gears. The quality was comparable and the height adjustment was good. I'm going to replace the allen wrench head on the installation bolt.
👤I received the Upanbike kickstand on April 24th, 2021. I adjusted the feet so that the rear tire could sit on the ground but not allow the bike to move side to side. The first problem I found was that the feet would adjust automatically to a lower height when I used it. I would have to hold the bike up and reach down to get the feet adjusted to where I had them. I put in a small piece of aluminum to stop the feet from going up from where I wanted them. If I wanted a little more height, I could adjust the feet down. I thought that I wasn't on an even surface when the bike became unstable a couple of weeks ago. I wanted to lube my chain so I extended my feet down to make it easier to do it. When I raised the kickstand, I noticed that it moved side to side when I was in the up position. I tried to tighten the bolt but it was too tight. I thought I had bottomed out the bolt. I noticed the top of the kickstand after removing the bolt. It was not the same as it was when I first saw it, the top piece was cracked down both sides of the bolt hole. There is no indication of a crack on the outside of the main section. My junk pile will now hold this kickstand.
👤One of the worst places to have a problem is where everything is great. The spring holds it up in place while I ride it's EXTREMELY WEAK adjusters, so I'm a little worried about riding it on some city roads. I will either improve or toss mine.
👤Put it on a bike. Bolts are easy. Stable for working on a bike. No worries of the bike falling over!
👤The adjustment location is where it broke. The locations take a bit of the material and weaken them. It is now used.
👤They sell a double kickstand. They need a wrench to tighten the witch.
👤It's good to work on your bike, but it can change. I have not had the chance to see how it works. I have it in my house, but haven't taken it out yet.
👤The bike stand is sturdy and fast to deliver. If riding on a road that is bumpy, it tends to loosen. I noticed that after riding a few hunbred meters. I made a rubber washer for the bolt and added rubber straps at all contact surfaces to stop the bolt from self-leasing. It has been working well ever since. There is a July 5, 2020 is an update. There is a The design of the stand seems to be flawed because of the tightness of the stand attached to the bike frame. After a while the stand will become loose, even if I try to increase the friction at contact surfaces. I took it off my bike and put it back in its original place.
It's compatible with all double rail saddles if they don't have any bits hanging off the rear. It is suitable for mountain, road bike, folding bike-fixed all tubes. The material is made from high quality aluminum alloy material and has top quality and very strong. The length is adjusted by removing the screw in the kickstand with the 4mm wrench. The bike kickstand should be adjusted from 12 to 16. Use the 5mm wrench to install. The package includes 2 wrench and one 4mm wrench. ORDER NOW and not have to worry. If you have a problem with the item, please contact them by e-mail, they will arrange a replacement free of charge.
👤It seems that most bikes don't come with kickstands nowadays. I wanted a kickstand for my new 20” bike, but I didn't want it to be too heavy, so I bought this one in the standard configuration and it fit perfectly with the arm. I would recommend this if you need a smaller bike like 20” as it fits well and the arm is easy to put up.
👤I bought this based on the photos of it coming with a black bolt and black plate, so it would blend in with my black bike. The kickstand came with all silver hardware. The rubber no slide foot at the bottom is just hard thin plastic that will wear and scratch up in 3 seconds if used on concrete or pavement. There is no rubber. An advertisement shows a kickstand with a red sticker on it. There was a sticker peeling on mine. I am not sure if this is a keeper. To compare another brand.
👤I was looking for a bike stand. I settled for this one. I am very pleased with this stand. It was installed without any problems. All tools are provided. The only thing I can tell you is to position the stand so that it doesn't interfere with the pedals and the gears on the tire. Great product!
👤The kickstand was easy to install on my bike. The chain stays on the side of the bike opposite from the derailleur. The allen wrench is needed to secure the stand to the bike. It takes two minutes to install. There is a The kickstand length is adjusted so that you can set it for the size of your bike. The picture shows what the Raleigh Cadent 3 looks like. The product was very good.
👤The Allen head screws were used for the installation. I will keep the wrench on my bike in case it gets loose over time. I have multiple bikes of different sizes, so the adjustment option is important. One of the two I ordered was not used. It was missing an Allen wrench, but it was scratched up pretty good. Someone returned it after trying it out.
👤This works for my bike. I can put it anywhere on my bike. I couldn't put the kickstand down on the sidebar because my brakes are at the bottom center of the frame. There is a Amazon wants me to rate the warmth. It's not warm. If you are looking for a warm kickstand, this is not it.
👤There is a piece of trash. As a doorstopper, it's only useful. They will only use the tool provided. Bolts will strip as well. The kickstand kept moving until the bike fell. It scratched up my bike. It was made with plastic and did not come with rubber. Time and money were wasted.
👤My children's bikes did not come with a kickstand. I tripped over the bikes in the garage. I didn't know how to measure for the right stand and where to put it. When I found this, I was skeptical. I just installed them. I think my 5 year olds bike is too small for the smallest setting. I need the stand to be shorter but it won't. It is perfect for my 7 year olds bike. It was easy to install and it had the tools to adjust it.
The package includes a bike kickstand, a 4mm L wrench, and a 5mm L wrench, all of which can be used in daily life. It is lightweight and durable, made of sturdy alloy material. The center balance structure is adopted in a balanced design. You can adjust the length with a push-button switch, which is convenient and quick. The anti-skid design is widely used to adapt to all kinds of ground. The brand mission is to let your bike bring you more fun. The brand mission is to let your bike bring you more fun.
👤A bicycle kick stand. The size of the key needed to tighten the bolt made it difficult for me to do so. Access was very difficult because the bolt was below the de-railer. You need a rounded head key to install the kickstand.
👤No tienes ajustable para bicicleta...
👤I thought it would be strong. The bottom is plastic and not sure how long it will last. Overall happy with it and it fit fine, easy to put on, and like that it can be adjusted.
👤This was not a good fit for my Trek. It was in the way when peddling. It looked like a toy on my bike.
There is a 100% customer satisfaction guarantee. Even if they are of the same size, the height of the frame from the ground could be different. Before placing your order, please measure the height of the frame from the ground and make sure it's on the scale of 7.00-- 9.45 inch. The bike kickstand is adjusted for 24” 26” 700C 27.5” 28” tire mountain bike. Stabilizing points are two points mounting. It's easy to install, the angle could be adjusted to fit most bikes. The bicycle kickstand is made of aluminum alloy and is strong and durable. Non-SLIP FOOT is a foot cover that is wider to prevent slipping on wet surfaces and sinking in mud.
👤The kickstand was installed on my hybrid bicycle. The kickstand might not work with some disc brake systems. This wasn't an issue for me since this bike has cantilever brakes. My last picture shows me holding a 5mm Allen key, which is the most common size on bicycles, close to where a disc brake rotor would sit so you can see there's little clearance. I could see the bracing arm and brake caliper lining up on the frame, which could make it difficult to mount. There is a It's a great kickstand for my needs. It looks better and more sturdy than my last. I carry a bag with necessities, like a few tools if something breaks, so the added support makes me satisfied. The installation tip is to tighten the bolts until they are snug. The mount will be pulled in line to where it should be if you seat it before you tighten it. Then, like you would do with bolts that hold your handlebars to the stem, tighten them down evenly, alternating between each bolt a little at a time, until they are fully tightened. There is a Hope this helps! Craig.
👤It looks like it was well made. The kickstand and bicycle are held in place by connecting the chain stay and seat stay. The stand had to be adjusted to fit my stumpjumper 2005, so I had to bend the brackets. One of the 4 provided grade two bolt's threads stripped while applying little Torque on an alan star wrench. The bolts were replaced with 6mm-1. The alan head is 30mm in diameter. I still gave it five stars because it was a good price point and the $4 worth of hardware was my desired upgrade. The venders have to remain competitive and I am sure the $4 would cost them a lot of sales. I installed two more on other bicycles and no problems were found.
👤I wanted this thingy to work, but the fact that it missed the mark of fitting my kickstand needs shouldn't stop you. It arrived in a timely fashion, but I think it was missing two washers, so I would've bubble wrapped it more, but that's just the way I roll. The thing seems well-made, more stout than I anticipated, so the more weight conscious should apply Mind Over Matter. 3. As an engineering concept, we seem to be feeble minded compared to genius level savantitude. I don't allow for wider spacing because of the more stable and less metallion'stress of the bicycle frame, and the disc brake works elbow room needs. It may be what you're looking for. There is a The loopy curve graded at 4 stars. Why don't ounce counter carry less water? Shouldn't their miscounting count for something? -Swan
👤I've been riding a bike for over 50 years, but I've never purchased a bike with a kick-stand unless it was a child's bike or I installed one on my bike. Since moving to Petaluma, I have found that having a kick-stand to support my bike while I load it is a blessing. This kick-stand is great, some don't support a bike with groceries or goods, but I love it. I don't have to lay it on the ground or find a place to support it. I would recommend it to anyone looking for stable support. I gave it a 4 star rating, I don't give many 5 star ratings unless I've owned the product for at least a year.
Durability The kickstand is made from anti-rust aluminum alloy and is waterproof. Their customer care team is on hand to help if you have any issues with their products. oy material Rear Kickstand is stable. It is easy to install a fixed plate with 2 holes. The length of the kickstand can be adjusted with a tool-less adjustabe. The reinforced plastic foot prevents slipping and sinking in mud. The E-bike is suitable for bicycles. The E-bike is suitable for bicycles.
👤The installation is easy. It took about a minute. The Allen key and two set of screws worked as expected. There were no issues with the installation on my Giant Talon 2. The bike stays up. The mechanism to put the stand up/down seems very strong as it snaps into place. The material on the stand looks good on the top half, which makes it feel like it's made of high quality parts. The plastic material on the bottom half that is adjusted by the push button looks very plasticy and doesn't look very strong. I removed a star from the reviews for this reason. The push button with the retaining clip is not very strong. If you are constantly adjusting the length, it could snap off. I don't think one would be adjusting the clip all the time. It should be a set of things. There is a If you want to put a stand on a bike that will get scratched up or get beat up, I wouldn't mind putting this on these types of bikes. If you are looking for something that will hold up your trophy bike, look elsewhere.
👤I'd been waiting for the kickstand to be in stock. Not. I was excited when I found this kickstand. The correct mounting screws were supplied. The allen wrench was also supplied. Nothing else was needed. It is easy to mount in 1 minute. It looks like it came with the bike. I recommend anyone who needs a kickstand to get one.
👤It requires two holes in the Side Bar. This one won't work for you if you expect the top to clamps on.
👤I used this for my Trek Verve 3 hybrid. Fantastic. It was fitted well. It came with two different size mounting screws and washers. The price is great. Shipping is quick. Happy with it.
👤I went with the one that was out of stock from rad. It fit perfectly. It was cheaper. It looks good and I hope it stays that way over time.
👤Other reviewers said it fits on the rad mission. It does! Make sure your frame has two holes in it. There are different mounts for every kickstand.
👤The stand is of good quality. It came with a set of screws. It looks like the M6 screws were sent by trek. The length of the screws was correct.
👤The Radmission kickstand has not been available for months. I found a kick stand when I got tired of waiting. It's easy to install. Good metal. We will see if the foot is durable. I used it to replace a kickstand.
The length is 34 cm and the weight is 290g. The tool-less adjustabe length is used to adjust the length of the kickstand. The reinforced plastic foot prevents slipping and sinking in mud. A steel hexagonal bolt prevents the foot from sliding off the kickstand. The angle stance is great for balancing bikes on the ground.
👤The kickstand may be good or bad. I did not get to test it. The mounting bolt is a problem. The photo clearly shows that the bolt is a hex bolt. It isn't. The bolt has a rounded head and a hexagonal head. The gearshift cable above the kickstand makes it impossible to mount my Trek bicycle securely. There is no way to use a key with an glyph. It would have been easy to secure from the side with a wrench. There is a It is difficult to get on the bolt because the threads are painted on it. The metric key they call for is large. I have about three dozen different sizes of hexagonal tools, but none of them fit correctly. If you don't have the right size, you will get frustrated.
👤There are a lot of positives about this, but one thing that is really worrying. The good first. There is a The kickstand is easy to install, and I love how you can change the height. There is a It sticks out far past the chainstay on my bike. My foot will catch it and extend it, forcing me to kick it back into place. Several times a day. There is no way to position it further inside. It hasn't happened yet, but if it were to come down while I'm in the middle of a street fight, it would throw me. No accessory will fit every bike. This is a quality product, but it makes me nervous when I ride with it. Something to think about.
👤I went to the hardware store to buy a longer bolt to fit the kickstand on a different bike. It was a bolt. The included ones were not long enough, so I used a 2.5" bolt for the new bike. Before buying this kickstand, I was not a fan of the generic kickstand sold with bikes. They were either too tall or short with no way to adjust them. Changing the tire height would make the kickstand unstable. There is a The kickstand is amazing. It is relatively light at 0.66 pounds. If not more, most other sturdy stands weigh double that. It is easy to adjust. Press a tab and move the section to the height you want. There were no bolts or complicated mechanisms. The length was a selling point for me. It will fit up to 29" wheels. The kickstand fit my mountain bike perfectly and felt sturdy because I could adjust the height. To many, putting a kickstand on a high dollar bike is not a good idea, but to me, it's a useful feature. I have had bikes fall when they are leaning against something. This kickstand has never caused a bike fall. I have put this on my road bike. Dropping a high dollar carbon bike is a bad idea. This prevents that thought from happening. There is a I've taken this on trails and large drops, and the stand never came down. The mechanism is very sturdy and makes a very strong click when you extend it. It works well on the roads with a road bike. There was no noise or gnashing of teeth. The kickstand is rock solid, will fit most bikes on the market, can be easily adjusted without any tools, and works amazingly well on mountain trails. I wouldn't hesitate to buy one for every bike I own because of the ease of adjustment and how good of a stand this is. Don't think twice if you're on the fence about buying this. The included bolt can be replaced with sizes you need at the hardware store. I got the bolt in the correct size, in the correct location. There is a The package included a standard bolt and an allen bolt. It's nice to have a choice.
If you have a question about the bicycle kickstand, please contact them and they will arrange a full refund or a new one for you. Not compatible with disc brakes.
👤I took a chance when I bought this kickstand because there was no mention of model compatibility. I ride a 29'er with disc brakes, which is advertised as compatible, in my defense. I've been unable to use the kickstand on either of the 29'ers. There is not enough clearance for the kickstand mounting hardware. Future buyers should beware of incompatibility issues if they are planning on buying a bike.
👤It seems to be working on my old bike. I don't know if it will work with all bikes. We'll see if it lasts because I don't abuse my things. It's easy to adjust.
👤Excellent! It can't be beat for the money. To make it stable, you have to adjust it to just the right height. Only time will tell if it will hold up.
👤It works well. It is much better with double tube clamps. My second bike. The first one is 5 years old.
👤It's easy to install and stable on the bike. My mountain bike has a kick stand.
👤I had doubts that the kickstand would hold my bike. I received it before I expected. Even a simpleton could install this kickstand. It was installed in 5 minutes. The picture shows you twisting the knob and the kickstand. The lengths are like a crescent wrench. The look is amazing. Will buy another for other bikes that don't have kickstands.
👤I returned it because it wouldn't fit in my bike. I own a bike.
👤It is easy to install and works well.
The package includes a bike kickstand and a piece of 8mm L wrench to suit your needs. Instantly, adjust length. You can adjust the kickstand length by pressing a button. If you want to adjust the bike kickstand for any length from 26 to 29", simply push the key to release the lock. The anti-slip design allows you to park your bike securely on a variety of surfaces, including sloped roads, and it has a rubber foot to prevent slippage. This bike kickstand can be used on 26”-28” inch mountain bikes, road bikes, BMX, MTB, City and commuter bikes. It can hold a maximum weight of up to 77 lbs. The kickstand is made from anti-rust aluminum alloy material, which makes it waterproof and able to endure wear and tear. Their customer care team is on hand to help if you have any issues with their products. What is that? Kickstand x1, 6mm Long Screw, 8mm Short Screw, Washer, aluminum alloy brackets, and in the box. What is that? Kickstand x1, 6mm Long Screw, 8mm Short Screw, Washer, aluminum alloy brackets, and in the box.
👤I bought this to replace the stock stand on my mountain bike. It's easy to mount exactly like the stock one. It is very sturdy without beingobtrusive. The release button locks into multiple teeth on the backside of the stand, making it easy to adjust the length. The bottom section of the stand is made of plastic. It would be great to have rubber on the bottom, but it's an excellent upgrade.
👤I like this product. The Kickstand works well on the Townie.
👤Even though it was easy to install, my 29" hybrid was standing almost straight up, even on the shortest setting. The bike was propped up on the garage floor. It would be knocked over by the wind. The shorter one will be from the same brand. The stand is too tall for my bike.
👤The stand was sturdy and easy to install.
It is not suitable for bicycles with wide spokes or sparse spokes. Birthday gifts for boys, girls, men, women, kids, everyone. Customer service is professional. If this bicycle spoke lights have any quality problems within 6 months, please contact them for after-sales service. Even if they are of the same size, the height of the frame from the ground could be different. Before placing your order, please measure the height of the frame from the ground and make sure it is on the scale of 8 - 9.6 inch. This bike kickstand can hold up to 18 bikes. The center kickstand has a screw that can be adjusted. The bicycle kickstand has a flat non-slip foot to ensure more resting stability and to prevent slipping on wet surfaces. This bike kickstand is for mountain bike, road bike, bmx/mtb, city commuter bike, sports bike, adult bike. The package includes a 4mm wrench for length adjustment. The package includes a 4mm wrench for length adjustment.
👤The kickstand is too long for a 16 inch bike, but it fits my granddaughter's bike frame well. When installed, the kickstand stands the bike up and it falls over to the other side. If you don't have a saw to cut the adjustment shorter, it won't be satisfactory. It should work with a 20 inch bike.
👤I was not able to shorten the kickstand enough to make it work on a bike. I was able to get it as short as possible by cutting off a small portion of the adjustable portion. It worked, but it held the bike in a different way than a kickstand should. I tried bending the kickstand because I was afraid the bike would fall over. It broke in half. That wasn't the most sensible option. There is a I have a broken, too- tall kickstand and am left to look for a better one. There is a I think this would work well for you if you have a bike of that size. This isn't the kickstand you're looking for, if you have a 16" bike, or if you're looking for an incredibly strong kickstand able to endure and adult's intentional effort to bend it.
👤I bought this for my child's 16 inch bike and it doesn't fit right. The piece will tip over if it is not adjusted to the max. Even though there is no rubber piece to prevent the metal from being scratched up, the piece that I removed works. I can see this working well on 18-20 inch bikes, it was easy to install. It is advertised to fit 16 inch bikes.
👤This product does not work on a 16 inch bike. My daughters bike tipped over in the opposite direction even at the lowest setting. The seller told me to check the size of the bike and make sure it was installed correctly after I contacted them. We own 5 bikes. I know how to install a kickstand for her bike. The picture is of how we had to use it to make it work. The product and customer service were very disappointing. I have sent pictures proving I am not stupid and her bike is a 16 inch, but I have yet to hear back. It was terrible.
👤My son wants a kickstand on his bike. I tried two other products that didn't work out. They were placed on the back tire because they weren't sturdy. They become a pain over time. One is supposed to go in the center of the kickstand. I put this on a boys bike. The back tire was rubbed when it was installed. I used my tool to clean the part that was rubbing. Adding that step takes 5 minutes. My son loves using the kickstand and the bike is sturdy.
👤It was too short for my granddaughter's bike, so I returned it. The stand leg can be adjusted by up to two inches. It's not long enough to keep the bike upright. The stand is resting on a stack of tiles to get a perfect lean angle. The stand is resting on the floor. You don't see my hand on the seat holding the bike upright. It would have been perfect if the stand's leg was longer. I'm looking for another option. A stand that is attached to the rear bolt.
Modern design has clear lines and a bright appearance. The kickstand is like leaves and the length adjustment screw is hidden behind it. The bike kickstand with wrench can be adjusted to fit between 12 and 14 inches. The tube is 1.2CM in diameter. The rear bicycle kickstand has a tube chain that stays 15-28mm. Application type is black. The bike kickstand is suitable for most mountain bike, BMX, road bike, city commuter bike, folding bike, child bike, sports bike and adult bike. The bike kickstand is made of strong and durable aluminum and has a sturdy folding structure to keep it stable. The anti-slip pad is attached to the kickstand to prevent it from sinking in mud. They provide hexagonal wrench tools to adjust the height of your bicycle tire, which is easy to install. The bicycle kickstand is easy to build. Fix the tripod with 3 hexagonal screws if you need to adjust the length of the tripod. ikawai try to maintain fairness and honesty with all customers, and will make your satisfaction their top priority, including providing a 90-day return and exchange policy. If you have a question during shopping, please contact them. Customer satisfaction is their goal. ikawai try to maintain fairness and honesty with all customers, and will make your satisfaction their top priority, including providing a 90-day return and exchange policy. If you have a question during shopping, please contact them. Customer satisfaction is their goal.
👤My wife's bike did not have a kickstand. We needed to fix that situation asap because I had never heard of it. After seeing more than a few advertised here, I decided to go with the right color and price. This works as it needs to, but not as I imagined. You have to assemble it a little, but that's also the point in which you modify it. It was easy to put together and to get to the settings she wanted. It took less than 5 minutes to work.
👤It's easy to install. I needed the shape of the attachment point to work on round or square tubes. The angle of the stand is too steep on the square/rectangular tubes. The center of gravity is too high on taller bikes and it doesn't have the greatest stability. The bike will tip over easily. It may not work very well on the ground.
👤The price and fit were great. If the gap on both sides of the half is not the same, it might break. I think they didn't tighten the bolts evenly.
👤The Sikawai is an excellent value. It was easy to install and work well on my bike. It took less than 5 minutes. It works like a charm.
👤The kids bike could not be used daily because of the broken window. The flimsy plastic part is easy to crack.
👤I bought this for my bike and can't complain.
👤I was napping while finishing the install. The plastic couldn't handle the force.
👤It was well made and adjusted. Does what I need. I was satisfied with the purchase. Put it on a car.
Not compatible with disc brakes. There are many used bikes, including 26", 28", and 29" 700c Mountain Bike/Road Bike/BMX/Adults Bike/City Bike Storage. It is easy to install a bottom mount that fits on a bike's chainstay neck. Adaptability is possible without the need for tools with the quick and easy push button latch design. AnyANGLESTANCE makes parking easier. It's great for even ground because riders can adjust their bikes to rest at any angle they want. The non-sLIP sole and wide reinforced plastic foot prevent slipping and sinking in mud.
👤The kickstand I got yesterday wouldn't work with my bike. The frame of my 29 inch mountain bike was too thick for the kick stand and it was the only one that would work. The kick stand that came with the bike is not the best in the world. The bike broke two lights when it fell over. I don't know if kickstand will work, so I'm not going to order them anymore. If it doesn't work, I can take it back.
👤It seemed to work. I bought this in September. The kickstand that holds the bicycle's handlebars snapped in two this morning. I expect something that I buy for my bike to last more than 3 months. This is ridiculous.
👤There is nothing to diminish the function.
Bicycle kickstand 29 inch bike trek products from Upanbike. In this article about bicycle kickstand 29 inch bike trek you can see why people choose the product. Bestcan and Suu66 are also good brands to look for when you are finding bicycle kickstand 29 inch bike trek.
Upanbike, Bestcan and Suu66 are some of the best brands that chosen by people for bicycle kickstand 29 inch bike trek. Find the detail in this article. Sataway, Rbrl and Bv are also brands that their products are worth to check.