The part of the bike kickstand on the ground is designed with anti- slip so that your bicycle can be parked steadily on various grounds. Made of high quality iron material. Installation is a great accessory for bike parking. It's strong enough for most bikes. It's perfect for repairs, parking, cleaning, maintenance and more. Warm tip. There could be slight differences in the color and size of the photo and the item due to the lighting effect, monitor's brightness, manual measurement and etc. I hope you can understand! Thank you!
👤The kickstand is a great accessory. Modifications were needed to fit my frame. It only took a few minutes to install. It's easy to work on the rear tire when it's in the air. I was able to Kickstart the bike with ease. When the rear tire needs to be removed, the stand must come off before the wheel. The rear tire removal on non motorized bikes is easier because you can flip the bike upside down. I feel this stand was my best upgrade for the price and won't go back to a single side stand again.
👤I like making bikes look older than they are. This is a nice addition. I had to modify the mounting tabs. I think it's great.
👤I wanted my bike to look like that. Thanks! There is a This is perfect. There is a A little too chrome. It will fix itself with time.
Works with vehicles with 2 inch class 3 receiver. The rack is built to last and secured by an anti-wobble pin and a key lockset. It is not intended to support the weight of a motorized bicycle. There are mounts at the center of the bicycle. The anti-slide feet have rubber grips. Only an 8mm allen/hex wrench is needed for installation.
👤I focused on the bad reviews. There is a People were upset that it required an 8mm wrench. That's the standard for kickstand... So... The new one might use the same tool as the old one, but you will need it to get the old one off. There is a People said it was too tall. It's beyond their ability to read how tall the thing is before ordering it. There is a The kickstand was too close to the ground. This is a reasonable complaint for people with no tools. Use a tool to grind the wings. I own 3 of these and they are all on motor assisted bikes. It's a good investment to have those bad boys stand up. Not intended for motorized bikes. The stock kickstand is not for the bikes.
👤I like the idea of a motorcycle stand for my bike. A normal kickstand wasn't cutting it in my gravel driveway. It works well for holding my bike. The stand hangs when not in use. It folds away from the standing position. A motorcycle stand folds up 90 degrees when not in use. This thing folds up 45 degrees when not in use. It gets in the way. I can still ride if I don't lean too much left or right. The legs catch on the ground if I do that. I'm sure this would catch hard and I would crash if I were to lean more. This would be a home run product if they could modify it further.
👤I bought this kickstand because of the positive reviews. I'm not impressed after putting it on a bike. There is a There is no easy way to make this height-adjustable without a tool. The wheel is lifted off the ground by the kickstand. The main reason I bought a kickstand was because attaching a trailer is impossible. It would be difficult to cut off a section of tubing from each side without cracking the feet or having one leg longer than the other, but I suppose you could pry off the plastic feet and cut off a section of tubing from each side with an angle grinder. There is a The kickstand is 2.5 inches from the ground in the up position. It might be possible to raise the kickstand by grinding away metal near the hinge, but this shouldn't be necessary. The 8mm allen key is not a very common tool. I'm not sure why they didn't use a bolt. There is not much to stop the kickstand from pivoting. The top of the stand is made of metal and the backing place for the bolt is not. If the kickstand shifts too much to one side, the pedal could get stuck and make a dangerous situation even worse. I'm going to spend a bit more on a decent kickstand because this product is going in the recycling.
👤Having my bike stand upright will make it easier for me to fix it. I decided to take a break and sit on the bike. I shifted to the right to even it out after a few minutes because it was leaning to the left. I got off and looked at the stand after another few seconds because it was leaning left so much. There is a The left leg was bent a bit to the left. The mounting bolt was not loose. There is a This stand is made from the cheapest mild steel and is basically a piece of junk. Don't waste your money.
The bike kickstand is easy to install on the bottom of the bicycle. The bicycle bell protects your riding safety. It's widely used for 24 bicycles. It is easy to install a bottom mount that fits on a bike's chainstay neck. Adaptability is possible without the need for tools with the quick and easy push button latch design. AnyANGLESTANCE makes parking easier. It's great for even ground because riders can adjust their bikes to rest at any angle they want. The non-sLIP sole and wide reinforced plastic foot prevent slipping and sinking in mud. The non-sLIP sole and wide reinforced plastic foot prevent slipping and sinking in mud.
👤It is a kickstand. The kickstand would close too close to the wheel on two different bikes, and I tried to install it on a different bike. I couldn't get my foot on it to bring it down so I couldn't ride the bike. It didn't fit.
👤The one that went into the wheel spoke when it went up. This one doesn't stay in the frame as much as I would like, but it doesn't go into the spoke which is more important.
👤The foot fell off while riding.
👤The kickstand has a hard plastic tip and is easy to adjust. Good value and quick installation.
👤It was late for a refund after 2nd use.
It's suitable for mountain bike, road bike, folding bike. The material is made from high quality aluminum alloy material and has top quality and very strong. The length is adjusted by removing the screw in the kickstand with the 4mm wrench. The kickstand should be adjusted from 12 to 14. The bike kickstand has a flat non-slip foot to ensure more resting stability. Installation is easy with the 8mm wrench. The package includes 2 wrench and one 4mm wrench.
👤I was surprised to find that I couldn't leave the bike upright and lay it down when not in use. I decided to look for a less expensive solution because the optional stand was very expensive. This one looked like it belonged on the bike. It was easy to install and adjust. It kept my bike upright, which was better than the stands I have had on other bikes. It folds out of the way. I don't think I will have to change it in a month like I have done with other things. I am very happy with this purchase. There is a I had to change my review. The bottom of the stand fell off after the first week of use. I thought I was to blame for not getting the set screw tight enough. Over the past month, I have had to reassemble several times. I don't have a kickstand because the last time I couldn't find the bottom, I didn't have a kickstand. I couldn't get the set screw to stay put, so I had to tighten the screw or it would fall apart. It's not worth it.
👤The 27" bike will work with these. I don't think it would. The bikes still lean more than I am happy with after I installed these on them. There is a I'd probably buy them again, but don't expect them to work on a 27" bike.
👤The kickstand was easy to install. The kickstand came with two different sized Allen Wrenches. I own a bike. The maximum extension of the kickstand had to be adjusted to work on my bike. The kickstand seems a bit flimsy when it's maximum. If I am not careful, this kickstand will fail and break. The buyer should beware. There is a This was a good purchase for $10
👤For the price, the stand is a sturdy piece of equipment. I lost it when the lower half fell off during a ride. I might have not tightened the bolt hard enough. I bought it again to get the lower half. I tightened the bolt hard and then drilled a hole and installed a nut and short bolt through the upper and lower half. It shouldn't be able to come apart again.
👤A kick stand. There is a It is easy to install, with the provided allen wrench. The provided allen wrench makes it easy to adjust. There is a The finish is nice and the stand swings nicely. There is a You couldn't ask for more at this price point.
👤The allen bolt that holds the kickstand to the bike's frame may be difficult to install. There wasn't enough room on my bike for the allen wrench to fit. I had to use a bolt to replace the kickstand. There is a The small allen wrench is very easy to use. The material is cheap. You may have to get another to tighten the leg.
👤It's a pain to bring my daughter's bike into the shop for something as small as this, so I was happy to find this. It's easy to install on her bike, it's adjusted so you can get the right height, and it works. Highly recommended!
It's easy to install, please remove all the nuts before putting the kickstand in. It should be tightened directly to the bike frame. It's convenient to parking. A strong bike kickstand is needed when biking with your family. When parking, their bicycle kickstand supports the bike and releases you to do more activities. The bike kickstand has an anti-slip mat to keep the bike out of harms way. The reinforced plastic foot mat prevents slipping on wet surfaces. The road bike kickstand is made of aluminum alloy material, it is waterproof, anti-rust and wear-resistant, it is the most riding lover's first choice. To adjust the height of the bike kickstand, they offer a mini wrench to loosen the middle of the inner hexagon screw. The steps are shown in pictures. The package includes a 4mm wrench for length adjustment. The size of the mountain bike kickstand is important. Installation of bicycle on rectangular and oval tube chain-stays. If your bike is 16 to 24 inches, the Alloy bicycle kickstand is perfect for you.
👤I was able to work well for 3 weeks. It snapped off. You only have 30 days to return the broken item and contact Amazon. We threw the broken product away because they couldn't do anything without it. This product was very disappointing. This product was junk, but Amazon gave us a 5 dollar promo credit, which helped. Stay away.
👤It is easy to install. The 500 Chinese bike kickstand on Amazon is probably the same as the other ones. It's nothing better or worse. It's obvious so no instructions or anything. There was a taped up cardboard box.
👤I own a standard road bike. It doesn't fit on my bike or my mom's bike. The opening is too small for most bikes. Don't put your money in a bag.
👤No funciona para todos los modelos.
👤It was installed on my bike after I received it. It broke for about 6 weeks. The metal snapped when used as a kickstand. Buy a different one.
👤It was very easy to install. It supports my mountain bike.
👤I wouldn't reach the ground on a 29 inch wheel.
Not for use on bikes. The rear kickstand is made of alloy material. The length is adjusted to fit the bikes. Increased stability is provided by two points mounting. Easy installation. Rear mounting could be adjusted. The Sole design prevents slipping on wet surfaces. The Sole design prevents slipping on wet surfaces.
👤I like to ride bikes, but I can't name any bike parts. I am a retired female. It was either ride it or get rid of it, after rarely using a nice and comfortable bicycle. I got it out, pumped up the tires, and went for a ride. I stopped to rest and couldn't put the bike down after pushing it back up the steep gravel road. There was no kickstand. I ordered the alloy after reading reviews. It arrived in a long box in my mail box. I was surprised by how much pressure it took to open and close the kick part of the stand. I found out how to mount it after looking over a few Amazon reviews and related pics. The package did not include a tool to tighten and loosen the bolts. I had a tool that fit perfectly in my tool box. The stand was mounted in about 5 minutes. I put it on the left side of the bike to avoid the cables. I'm not sure if I mounted it in the preferred mounted position, but it works very well, holds the bike up best when the stand is fully extended, but can hold it up even on the least extended position. It doesn't affect tire rotation or my feet when I ride and pedal. I injured myself when I kicked it open in my garage, with my left foot in front of the stand and my right foot behind it. I used my right foot to open the stand, but the left foot was too close. The stand hit my foot and took off my skin. I was wearing flipflops when I did this maneuver and it will likely not happen again.
👤I tried different kickstand for my new Kona Sutra touring bike, including the old reliable Greenfield rear mount. This is the only one that worked. The height adjustment is awesome and it cleared my brake caliper. The build quality is great. Especially at this price!
👤I ordered a bike but it didn't fit me, I am 6' and ride a 58 cm road bike. I found a home for it on my friend's 49 cm hybrid bike. The main thing you need to worry about is the angle between the chain stays and the seat stays, which increases on larger frame bikes. The stand looks good. I don't suggest buying this unless you are a smaller rider or your bike has a drop seat stays.
👤It's easy to install, the bottom section just adjusts screws in small amounts so it doesn't pull on one part of the brackets over the other. There are protective components made of plastic. It is not metal on metal. My son's bike is a GT and it has a 27.5 tire. It works well with plenty of adjustment. I used threadlock number 42 medium strength. If you don't use a stronger strength, the screws will inevitably scratch the bike frame. Light weight. The kickstand that is attached to just one rail looks a bit more discreet. Since the weight can be distributed out a bit more, it's a good idea to use this. The rail will loosen up in no time with the one bracket on it. We just purchased it and will update it in the summer.
Bike down all the time when you commute to work or school, or when you are moving house. The bike kickstand is a bike accessory that helps keep the bike upright. The bike kickstand is lightweight and easy to install. This rear sider bike kickstand is compatible with 26” to 29” inch mountain bikes, road bikes, BMX, MTB, City commuter bikes, and kids bikes. It can hold a maximum weight of up to 77 lbs. Instantly, adjust length. You can adjust the kickstand length by pressing a button. If you want to adjust the bike kickstand for any length from 26 to 29", simply push the key to release the lock. The anti-slip design allows you to park your bike securely on different surfaces and sloped roads, and prevent slipping in mud. It is easy to install on most bikes because the package comes with two different shaped clamps. The kickstand is made from anti-rust aluminum alloy material, which makes it waterproof and able to endure wear and tear. Their customer care team is on hand to help if you have any issues with their products. The kickstand is made from anti-rust aluminum alloy material, which makes it waterproof and able to endure wear and tear. Their customer care team is on hand to help if you have any issues with their products.
👤I picked up a model from 2001 The Marin Shoreline Trail bike is almost no place for a kickstand. I found this kickstand on Amazon. It's very sturdy. I had to jerry-rig this on the rear horizontal crossbar because there was no obvious place to mount the kickstand. My bike was completely supported by the extendable kickstand. I wanted a kickstand as I'm more of a city biker. This kickstand is an A+ for hard-to-fit bikes.
👤The kickstand slips when you put pressure on the bike, and the plastic shims that go over the chainstay are for protection. It is much better now that it is replaced with rubber.
👤The kickstand is very strong. I've had a lot of problems finding a kickstand that would fit my bike. Looks like I found one. My ebike is held up perfectly by this kickstand. It is very strong. This is a great option for anyone riding an ebike. It can hold up to 77 lbs. It looks great. Very happy with the product.
👤The kickstand worked well on my mountain bike. The plastic inserts were the only issue. I replaced them with a 1/16 inch rubber sheet because I knew they were going to slide. The rubber won't scratch the finish like the plastic would, and the kickstand won't go anywhere. The kickstand looks like it was made for a fat bike. I spent a lot of money on dropping the bike on the ground.
👤This is the first kickstand that I have bought for my ebike and it is the best one. It is very easy to install, but I would recommend wrapping a small strip of rubber around the part of the bike you want to attach the kickstand to. This gives it a better grip.
👤Don't be overweight. It is easy to assemble.
The size of the bicycle bag is more convenient to store items, it is built in double-sided mesh bag, which is not easy to move, and it can meet the items you need for daily riding. The set screw is Rust resistant with protective tip. The all-steel construction is strong anddurable. The bike kickstand is easy to install. It's spring for opening and closing. Pre-drilled holes are used to adjust the height.
👤My daughter's bike was worked on perfectly by the first one I ordered. I was pleasantly surprised to find it fit my other daughter's bike without modification. If you want to loosen up the pivot point, spray some lube on it and then use a spray gun. The shortest setting for the screw will fit a bike with a wheel. Both bikes have two tubes coming off the bottom crank. The kickstand is between the two tubes. There is a hole in the bike's support brackets that can be used for a kickstand. It was perfect. I was able to install it in front of the cross-plate on the 12" bike, even though there was no hole. For clarification, see my pics.
👤If a kids bike doesn't have a straight cross-member, it won't work. The Disney Planes Huffy bike won't bolt to the ground. The two photos are what I mean. The Huffy Planes bike is not compatible with the Disney Princess bike. We wanted to use the Planes bike without training wheels.
👤I didn't realize my son's bike didn't come with a kickstand until I got it home. I didn't think about a kickstand while we were there because it had training wheels on it. The plan was to remove the training wheels after he got home. I decided to order this because I don't want him throwing the bike down. I got it in the mail two days after I ordered it. It only took a 14mm wrench and aPhillips head screwdriver. It works as well as it looks. I don't think you can beat it for the price.
👤I bought this for my daughter's and son's bikes. They are easy to install with a 14mm (or 9/16) socketst wrench and aPhillips head screwdriver. The plate system that comes with my bikes can be used to fit the rear arms between the two points of the body, even though neither of my bikes has a predrilled hole. Before you tighten the assembly, you should check to make sure it doesn't stick out too far from the arm or that it's too close to the wheel. Both of them were in place pretty much where they should be. You just need to adjust the height of your bike once you're happy with the placement. This is a little tricky because you might not get it right on the first try and the screw might want to bind. The process of installing both of these took about five minutes. I'm not sure how durable this product will be for a heavier adult bicycle that is likely to be ridden for a lifetime. I'm pretty confident that smaller kids' bikes are fine.
👤I wish I could say that this worked for us, but I couldn't get the screw off to extend the bar. I bought this for my daughter. She stops slamming it down on the ground and messing up her handle bars. It looked like it would be easy to put on. My daughter's bike has a predrilled hole and screws on top. The kickstand has a screw extension so that you can level a bike to the ground. I and my husband couldn't get the screw off the bottom to extend the stand. The bad boy was screwed on by Hulk. I need him to help me. No, seriously. Send him.
Each package comes with a piece of a bike kickstand, a 4mm L wrench and a 5mm L wrench, a convenient combination tool set for you to use in daily life. The Bike Kickstand should be tightened to prevent it from falling. The kickstand is extended. The extended bike kickstand can be installed smoothly if the disc brake is above or inside the frame. When the disc brake is above the frame, the ordinary brackets can only be installed. The kickstand is adjusted. The button latch design can be adapted to any length without tools. Most bikes have 24 to 29 tires. The 2-point mounting has higher stability than standard rear brackets. Wide plastic feet with non-slip soles prevent slipping or sinking into mud on wet surfaces. Rubber Gasket Protection The frame can be protected from being scratched with the rubber gasket. Rubber Gasket Protection The frame can be protected from being scratched with the rubber gasket.
👤I really wanted to like this stand. I need to modify my Roubaix to be a "skinny tire" beach cruiser. I tried a standard center-mount kick stand and it was very unstable. I was hoping this would work because this is an older Roubaix with an aluminum frame and carbon fiber seat stays. There is a The angle between the seatstay and the chain stay was too narrow. The kickstand was mounted too far forward and caught on my shoe. The Roubaix has 700c tires, but it was still too large to fit in the 24" to 29" range. There is a The kickstand is very well made. The bike was very stable. I was unable to ride the bike with it installed.
👤I've never had a center mount kickstand work well on a bike for our family. The laws of physics tell you where the mountain bike should be, but I didn't replace my kick stands until after I got my new bike. How old is kickstand frustration? It's the only kickstand that our family has left, and since it's mounted where the weight of the bike is the laws of physics and common sense, it should be the only one that fails. There is a If you still have the original center mount kickstand that came with your mountain bike, you need to purchase this kickstand.
👤I bought a different one that didn't work out. This was correct as goldilocks would note. It may not fit all bikes or be what you are looking for before making a decision. Some bikes are built differently. We have a cross over folding bike, an older cruiser LL Bean bike, and our original skinny wheel bikes. We needed the bike stands to fit two out of our five and they did.
👤It works perfectly with my Novara Ponderosa 29er. No instructions. They're not needed. Installation was easy, put the bottom piece on first, then install the top linkage. They were slid around until the assembly looked right, then put blue Locktite on the screws and snugged them down. The foot was adjusted until it looked right. The bike is stable when the leg is out of the way, and it flips up when the leg is down. What's not to like?
👤The bike stand is great. It is easy to install a light weight road bike. It is also changeable. I am impressed. My daughters Road Bike may be a second stand for me.
👤I was looking for a kickstand that would work with the bike frame. This one was reasonable. It should say that it is appropriate for or fits bikes with a rear frame post diameter of 2. The frame attachment locations on my frame are close to 4 inches in fat. The kickstand is not designed to attach to this post. Installation directions were not good. Four pictures do not constitute instructions which should include tools needed, what to attach first, and any cautions.
👤There were no instructions for the kickstand that came in multiple parts. It took a while to assemble, but once it is assembled it appears sturdy.
It can fit bikes with or without kickstand plates. SUITABLE: This bicycle kickstand can be used for most 18INCH - 22INCH TIRE and Mountain Bike/Road Bike/BMX/MTB/Sports Bike/city commuter bike/kids bike/adult bike. The table and anti-skid are made of aluminum. The bike stand can get into the mud if the bicycle is not protected from slipping on wet or smooth surfaces. Excellent replacement for training wheel for children's bikes. It's convenient to parking your child's bike. The bicycle kickstand foot has rubber pads to prevent it from slipping on wet surfaces. It's easy to install, please remove all the nuts before putting the kickstand in. It should be tightened directly to the bike frame.
👤Not bad for $10 bucks. It was easy to set up. I thought I didn't need the spacers. I had to use both of the spacers on each side to get a tight fit. To adjust the height of the kickstand, loosen the bolt and slide it down to the height.
👤I had to install two different styles, one had a modified molded locking assembly and the other had a hand loose locking nut, it was a little cumbersome to install. Spring action is easy to adjust.
👤I mounted it to a round frame so it wouldn't twist. It wouldn't have been a problem if it was flat on both sides. I added steel to make it not twist. It is a sturdy kickstand.
👤My grandson's bike was perfectly fit by this kickstand. It fits perfectly next to the frame and doesn't get in the way of the pedals, unlike most kickstand.
👤Needed a replacement for an older foldable bike.
👤The kickstand wouldn't get tight around the bike frame. It is very thin.
👤It does not hold up well, but I am not sure what it is. I didn't get to use it when I installed it. I didn't think it was tight, but it was for this material. Be careful.
Before you put the kickstand in, make sure you remove all the nuts. It should be tightened directly to the bike frame. You can easily install the wrench with the package. The kickstand can fit on most tire bikes. The bike kickstand is made of anti-rust aluminum alloy material. The package has 2 sets of screw kits that are easy to install. The bike kickstand has a non-slip foot to prevent bike slipping on wet grounds. The foot of this product can be adjusted to fit on different bikes. The foot of this product can be adjusted to fit on different bikes.
👤Light weight, stable, nice flare at base to prevent sinking into dirt. It was installed easily into the location.
👤The headline said it all. It was easy to put on. My bike is tall, so I was very happy that it is adjusted.
👤It was installed easily. I am happy with it, it took me minutes to install. Thanks.
👤The bike stand is easy to install. My kid likes it.
👤If mounted to suck out, it will rub the tire, but it won't fit a specialized 29er.
👤It works well for my hybrid bike.
Bicycle kickstand 26 inch double products from Lioobo. In this article about bicycle kickstand 26 inch double you can see why people choose the product. M-wave and Free-fly are also good brands to look for when you are finding bicycle kickstand 26 inch double.
Lioobo, M-wave and Free-fly are some of the best brands that chosen by people for bicycle kickstand 26 inch double. Find the detail in this article. Bestcan, Colmthys and Bv are also brands that their products are worth to check.