There is a 100% customer satisfaction guarantee. Even if they are of the same size, the height of the frame from the ground could be different. Before placing your order, please measure the height of the frame from the ground and make sure it's on the scale of 7.00-- 9.45 inch. The package includes a bike kicstand and a key. The length has been adjusted. The length can be adjusted between 13 inches and 14.9 inches, depending on the wrench used. The quality is high. The kickstand made of aluminum alloy is very strong and durable to use. You can easily install the bike kickstand with the two hexagon wrenches included in the package. The kickstand can be used to adjust the length. It's for Mountain Bike/700 Road Bike/BMX/MTB. The kickstand can be used to adjust the length. It's for Mountain Bike/700 Road Bike/BMX/MTB.
👤3 stars on stability I did not like the idea of having round rails mounted on. If you have a flatter mounting surface, be sure to have stability.
👤The kickstand works well. It is easy to install and adjust, and never gets in the way. I don't know why I have been leaning my bike against the kickstand for so long.
👤I am getting back to riding my bike. My old fashion kick stand is no longer working. I put this on with the included tools, but make sure the peddles don't hit against it. I adjusted the length a bit and tightened it down. Love it. Have a speed greater than 26 mph. This is a good one. There is a cover that can go on the stand and tube patches.
👤It's very sturdy on my sirrus 1.0, my bike is size XXS and my tires are 700/32 C.
👤My wife was against me putting the kick stand on her bike. Her bike was falling on the floor of her garage, as well as on the street, sidewalk, and grass. Since she installed it, her bike sits perfectly upright, she doesn't fall down and it stays free of scratches and dirt. She didn't say anything about the kick stand since. It must be working.
👤This is what I needed and what I wanted. It is lightweight and easy to deploy. I think it's best for square bars on the rear frame.
👤I wish I'd had this sooner. The rubber sleeve fits the frame, so no slippage. Kickstand has a satisfying kick. There is no saggy kickstand anymore. Sturdy in all positions. The bike is 20 years old and has a speed of 15.
👤My granddaughter has an 18 inch bicycle. I have extended it for her bike so it is not too short for a 20 inch bike unless you allow for a lot of tilt. I think it would be fine for a 16 inch bike as I could move up the extension to accommodate that size bike. This one was easy to install and seems very sturdy. I bought another brand that said it would fit 16 to 20 inch bikes, but it was too short for an 18 inch bike. This is in white. The bike is pink with white wheels. It's recommended for a 16 or 18 inch bicycle.
The past kickstand have quality problems in solving multiple tire sizes, so they only solve two sizes of bike tires. The stability of the bike is improved. Please contact me if you have any usage questions. The length is adjusted. It's suitable for 24 inch-26 inch bike. Brand new and high quality. It is easy to install.
👤This was easy to install. I don't like that the bottom plastic piece broke easily. The kickstand is loose and6753167531675316753167531675316753167531675316753167531675316753167531 I adjusted the kickstand's position so that it doesn't hit my pedals when it does migrate. This is a cheap option that can keep a bike upright when not in use.
👤This is a quality kickstand. I used it on a cruiser.
👤After fixing it, looked strong. I felt that it was fragile. Doing it is a job. It's not a replacement for the original stand.
👤The powder coated finish definitely missed quality control.
This bicycle kickstand is waterproof and wear-resisting, and it is made of anti-rust aluminum alloy. It's suitable. This bike kickstand can be used for a Mountain Bike/700C Road Bike/BMX bike. The bike kickstand is made steadily by adjusting it with a pad. Wear-resisting and thicken to prevent slipping on wet surfaces. The length is adjusted. The kick center stand has a screw that can be adjusted. The tube diameter is 15-30mm. Rubber protection The bike side kickstand has a rubber pad on it. Live support. The contact information that comes with the package can be reached by phone or email. They are behind their products.
👤The kickstand holds the bike securely. It was easy to install. I need this to hold up my old mountain bike that I use with my kid's trailer bike and a front child seat. It can hold the bike upright even with all the extra weight and attachments. It makes loading up the bike simpler. There is a clearance issue between the kickstand and the pedal, but it has not been a problem.
👤I have a bike with 26" tires. It holds the bike up very well. It took a few minutes to put on. When you hold the bike up and ride, it stays put because of the great spring back. I would recommend it.
👤It's easy to install and works well. I worry about the stability if someone hits it because I had to extend it all the way. It seems good in normal circumstances.
👤My husband's mountain bike is perfectly fit by this thing. His bike was a pain without a kick stand. Problem solved.
👤May not fit all bikes, but is very well made.
👤This inexpensive kick stand was the one that I took a chance on. I was surprised that it works for my bike.
👤It is a good stand. Everything works well. I read a lot of reviews before buying this. You can't tie the bolt too hard. The bike doesn't need that much force. The same is true when you change the length. It is good to have enough force. It works well.
👤It's easy to install. It is easy for my 9 year old to use. Works well!
👤stato utilizzato per la bici, troppo largo, non sostiene, ma ormai l'avevo gi
👤In 5 minuti, il schiavi robustezza consegna impeccabile non vero.
👤Sconsigliatissimo di pessima qualit. In 2 dopo nemmeno 2 gg di utilizzo, spezzato.
👤La sua funzione is perfetted by un prodotto economico. Per un tandem.
👤Un prezzo irrisorio Robusto e molto stabile. In 5 minutes. Ottimonprodotto.
It's suitable for mountain bike, road bike, folding bike. The material is made from high quality aluminum alloy material and has top quality and very strong. The length is adjusted by removing the screw in the kickstand with the 4mm wrench. The kickstand should be adjusted from 12 to 14. The bike kickstand has a flat non-slip foot to ensure more resting stability. Installation is easy with the 8mm wrench. The package includes 2 wrench and one 4mm wrench.
👤I was surprised to find that I couldn't leave the bike upright and lay it down when not in use. I decided to look for a less expensive solution because the optional stand was very expensive. This one looked like it belonged on the bike. It was easy to install and adjust. It kept my bike upright, which was better than the stands I have had on other bikes. It folds out of the way. I don't think I will have to change it in a month like I have done with other things. I am very happy with this purchase. There is a I had to change my review. The bottom of the stand fell off after the first week of use. I thought I was to blame for not getting the set screw tight enough. Over the past month, I have had to reassemble several times. I don't have a kickstand because the last time I couldn't find the bottom, I didn't have a kickstand. I couldn't get the set screw to stay put, so I had to tighten the screw or it would fall apart. It's not worth it.
👤The 27" bike will work with these. I don't think it would. The bikes still lean more than I am happy with after I installed these on them. There is a I'd probably buy them again, but don't expect them to work on a 27" bike.
👤The kickstand was easy to install. The kickstand came with two different sized Allen Wrenches. I own a bike. The maximum extension of the kickstand had to be adjusted to work on my bike. The kickstand seems a bit flimsy when it's maximum. If I am not careful, this kickstand will fail and break. The buyer should beware. There is a This was a good purchase for $10
👤For the price, the stand is a sturdy piece of equipment. I lost it when the lower half fell off during a ride. I might have not tightened the bolt hard enough. I bought it again to get the lower half. I tightened the bolt hard and then drilled a hole and installed a nut and short bolt through the upper and lower half. It shouldn't be able to come apart again.
👤A kick stand. There is a It is easy to install, with the provided allen wrench. The provided allen wrench makes it easy to adjust. There is a The finish is nice and the stand swings nicely. There is a You couldn't ask for more at this price point.
👤The allen bolt that holds the kickstand to the bike's frame may be difficult to install. There wasn't enough room on my bike for the allen wrench to fit. I had to use a bolt to replace the kickstand. There is a The small allen wrench is very easy to use. The material is cheap. You may have to get another to tighten the leg.
👤It's a pain to bring my daughter's bike into the shop for something as small as this, so I was happy to find this. It's easy to install on her bike, it's adjusted so you can get the right height, and it works. Highly recommended!
The tool-less adjustabe length is used to adjust the length of the kickstand. The reinforced plastic foot prevents slipping and sinking in mud. A steel hexagonal bolt prevents the foot from sliding off the kickstand. The angle stance is great for balancing bikes on the ground.
👤The kickstand may be good or bad. I did not get to test it. The mounting bolt is a problem. The photo clearly shows that the bolt is a hex bolt. It isn't. The bolt has a rounded head and a hexagonal head. The gearshift cable above the kickstand makes it impossible to mount my Trek bicycle securely. There is no way to use a key with an glyph. It would have been easy to secure from the side with a wrench. There is a It is difficult to get on the bolt because the threads are painted on it. The metric key they call for is large. I have about three dozen different sizes of hexagonal tools, but none of them fit correctly. If you don't have the right size, you will get frustrated.
👤There are a lot of positives about this, but one thing that is really worrying. The good first. There is a The kickstand is easy to install, and I love how you can change the height. There is a It sticks out far past the chainstay on my bike. My foot will catch it and extend it, forcing me to kick it back into place. Several times a day. There is no way to position it further inside. It hasn't happened yet, but if it were to come down while I'm in the middle of a street fight, it would throw me. No accessory will fit every bike. This is a quality product, but it makes me nervous when I ride with it. Something to think about.
👤I went to the hardware store to buy a longer bolt to fit the kickstand on a different bike. It was a bolt. The included ones were not long enough, so I used a 2.5" bolt for the new bike. Before buying this kickstand, I was not a fan of the generic kickstand sold with bikes. They were either too tall or short with no way to adjust them. Changing the tire height would make the kickstand unstable. There is a The kickstand is amazing. It is relatively light at 0.66 pounds. If not more, most other sturdy stands weigh double that. It is easy to adjust. Press a tab and move the section to the height you want. There were no bolts or complicated mechanisms. The length was a selling point for me. It will fit up to 29" wheels. The kickstand fit my mountain bike perfectly and felt sturdy because I could adjust the height. To many, putting a kickstand on a high dollar bike is not a good idea, but to me, it's a useful feature. I have had bikes fall when they are leaning against something. This kickstand has never caused a bike fall. I have put this on my road bike. Dropping a high dollar carbon bike is a bad idea. This prevents that thought from happening. There is a I've taken this on trails and large drops, and the stand never came down. The mechanism is very sturdy and makes a very strong click when you extend it. It works well on the roads with a road bike. There was no noise or gnashing of teeth. The kickstand is rock solid, will fit most bikes on the market, can be easily adjusted without any tools, and works amazingly well on mountain trails. I wouldn't hesitate to buy one for every bike I own because of the ease of adjustment and how good of a stand this is. Don't think twice if you're on the fence about buying this. The included bolt can be replaced with sizes you need at the hardware store. I got the bolt in the correct size, in the correct location. There is a The package included a standard bolt and an allen bolt. It's nice to have a choice.
It is not suitable for bicycles with wide spokes or sparse spokes. Birthday gifts for boys, girls, men, women, kids, everyone. Customer service is professional. If this bicycle spoke lights have any quality problems within 6 months, please contact them for after-sales service. Even if they are of the same size, the height of the frame from the ground could be different. Before placing your order, please measure the height of the frame from the ground and make sure it is on the scale of 8 - 9.6 inch. This bike kickstand can hold up to 18 bikes. The center kickstand has a screw that can be adjusted. The bicycle kickstand has a flat non-slip foot to ensure more resting stability and to prevent slipping on wet surfaces. This bike kickstand is for mountain bike, road bike, bmx/mtb, city commuter bike, sports bike, adult bike. The package includes a 4mm wrench for length adjustment. The package includes a 4mm wrench for length adjustment.
👤The kickstand is too long for a 16 inch bike, but it fits my granddaughter's bike frame well. When installed, the kickstand stands the bike up and it falls over to the other side. If you don't have a saw to cut the adjustment shorter, it won't be satisfactory. It should work with a 20 inch bike.
👤I was not able to shorten the kickstand enough to make it work on a bike. I was able to get it as short as possible by cutting off a small portion of the adjustable portion. It worked, but it held the bike in a different way than a kickstand should. I tried bending the kickstand because I was afraid the bike would fall over. It broke in half. That wasn't the most sensible option. There is a I have a broken, too- tall kickstand and am left to look for a better one. There is a I think this would work well for you if you have a bike of that size. This isn't the kickstand you're looking for, if you have a 16" bike, or if you're looking for an incredibly strong kickstand able to endure and adult's intentional effort to bend it.
👤I bought this for my child's 16 inch bike and it doesn't fit right. The piece will tip over if it is not adjusted to the max. Even though there is no rubber piece to prevent the metal from being scratched up, the piece that I removed works. I can see this working well on 18-20 inch bikes, it was easy to install. It is advertised to fit 16 inch bikes.
👤This product does not work on a 16 inch bike. My daughters bike tipped over in the opposite direction even at the lowest setting. The seller told me to check the size of the bike and make sure it was installed correctly after I contacted them. We own 5 bikes. I know how to install a kickstand for her bike. The picture is of how we had to use it to make it work. The product and customer service were very disappointing. I have sent pictures proving I am not stupid and her bike is a 16 inch, but I have yet to hear back. It was terrible.
👤My son wants a kickstand on his bike. I tried two other products that didn't work out. They were placed on the back tire because they weren't sturdy. They become a pain over time. One is supposed to go in the center of the kickstand. I put this on a boys bike. The back tire was rubbed when it was installed. I used my tool to clean the part that was rubbing. Adding that step takes 5 minutes. My son loves using the kickstand and the bike is sturdy.
👤It was too short for my granddaughter's bike, so I returned it. The stand leg can be adjusted by up to two inches. It's not long enough to keep the bike upright. The stand is resting on a stack of tiles to get a perfect lean angle. The stand is resting on the floor. You don't see my hand on the seat holding the bike upright. It would have been perfect if the stand's leg was longer. I'm looking for another option. A stand that is attached to the rear bolt.
The bike kickstand is easy to install on the bottom of the bicycle. The bicycle bell protects your riding safety. It's widely used for 24 bicycles. It is easy to install a bottom mount that fits on a bike's chainstay neck. Adaptability is possible without the need for tools with the quick and easy push button latch design. AnyANGLESTANCE makes parking easier. It's great for even ground because riders can adjust their bikes to rest at any angle they want. The non-sLIP sole and wide reinforced plastic foot prevent slipping and sinking in mud. The non-sLIP sole and wide reinforced plastic foot prevent slipping and sinking in mud.
👤It is a kickstand. The kickstand would close too close to the wheel on two different bikes, and I tried to install it on a different bike. I couldn't get my foot on it to bring it down so I couldn't ride the bike. It didn't fit.
👤The one that went into the wheel spoke when it went up. This one doesn't stay in the frame as much as I would like, but it doesn't go into the spoke which is more important.
👤The foot fell off while riding.
👤The kickstand has a hard plastic tip and is easy to adjust. Good value and quick installation.
👤It was late for a refund after 2nd use.
The size of the mountain bike kickstand is important. Installation of bicycle on rectangular and oval tube chain-stays. If your bike is 16 to 24 inches, the Alloy bicycle kickstand is perfect for you. The bike side kickstand is light and sturdy, and it is made of an aluminum alloy that makes it incredibly sturdy. The kickstand length can be adjusted to fit nearly all bikes with 22"-28" wheels. It's suitable for mountain bikes, road bikes, lightly loaded touring bikes. One can easily install the kickstand using the two Allen hexagon wrenches in the package. The rubber feet have a wide plastic foot that prevents sinking in mud. The same protective grip is used at the clamp side. The bike kickstand is the perfect birthday or Christmas gift.
👤Easy to install and adjust. Nice kickstand. Would have thought it would be double the price. It's worth it.
👤It is stable and sturdy. It's easy to install. There is a Well built. Good price too.
👤It was simple and straightforward. It worked well for my daughter's bike. I'm not sure if heavy bikes are harder to balance on. But worked well for us.
👤The kickstand looks great and is easy to install. I'm happy with it. You can change the height.
👤When pulling my son on a trail-a-bike, I got this to add some stability to my bike. It was difficult to get around my frame, but it would be easier on oval shaped tubes. It is mostly plastic, but adds a little stability when used with the built in kickstand.
👤It was easy to install. It seems like a good kickstand.
The 700c size wheel is for adult riders. The bike has a limited lifetime warranty. It's suitable for mountain bike, road bike, folding bike. The material is made from high quality aluminum alloy material and has top quality and very strong. The length is adjusted by removing the screw in the kickstand with the 4mm wrench. The kickstand should be adjusted from 12 to 14. The bike kickstand has a flat non-slip foot to ensure more resting stability. Installation is easy. The 8mm wrench is easy to use. The package includes 2 wrench and one 4mm wrench.
👤It seems that most bikes don't come with kickstands nowadays. I wanted a kickstand for my new 20” bike, but I didn't want it to be too heavy, so I bought this one in the standard configuration and it fit perfectly with the arm. I would recommend this if you need a smaller bike like 20” as it fits well and the arm is easy to put up.
👤I bought this based on the photos of it coming with a black bolt and black plate, so it would blend in with my black bike. The kickstand came with all silver hardware. The rubber no slide foot at the bottom is just hard thin plastic that will wear and scratch up in 3 seconds if used on concrete or pavement. There is no rubber. An advertisement shows a kickstand with a red sticker on it. There was a sticker peeling on mine. I am not sure if this is a keeper. To compare another brand.
👤I was looking for a bike stand. I settled for this one. I am very pleased with this stand. It was installed without any problems. All tools are provided. The only thing I can tell you is to position the stand so that it doesn't interfere with the pedals and the gears on the tire. Great product!
👤The kickstand was easy to install on my bike. The chain stays on the side of the bike opposite from the derailleur. The allen wrench is needed to secure the stand to the bike. It takes two minutes to install. There is a The kickstand length is adjusted so that you can set it for the size of your bike. The picture shows what the Raleigh Cadent 3 looks like. The product was very good.
👤The Allen head screws were used for the installation. I will keep the wrench on my bike in case it gets loose over time. I have multiple bikes of different sizes, so the adjustment option is important. One of the two I ordered was not used. It was missing an Allen wrench, but it was scratched up pretty good. Someone returned it after trying it out.
👤This works for my bike. I can put it anywhere on my bike. I couldn't put the kickstand down on the sidebar because my brakes are at the bottom center of the frame. There is a Amazon wants me to rate the warmth. It's not warm. If you are looking for a warm kickstand, this is not it.
👤There is a piece of trash. As a doorstopper, it's only useful. They will only use the tool provided. Bolts will strip as well. The kickstand kept moving until the bike fell. It scratched up my bike. It was made with plastic and did not come with rubber. Time and money were wasted.
👤My children's bikes did not come with a kickstand. I tripped over the bikes in the garage. I didn't know how to measure for the right stand and where to put it. When I found this, I was skeptical. I just installed them. I think my 5 year olds bike is too small for the smallest setting. I need the stand to be shorter but it won't. It is perfect for my 7 year olds bike. It was easy to install and it had the tools to adjust it.
There are OCCASIONS. The seamless leggings set is perfect for casual, sport, exercise, fitness, workout, gym, yoga, pilates, aerobics, running, jogging, dancing, cycling, hiking, climbing boxing, bowling, tennis, badminton or other ball games. The double leg kickstand is a sturdy way to prop your bike. Protects bike chains from being caught. There is a height for bicycle sizes 24-28. The design was patented. For mountain or city riding. Not for use on bikes.
👤It's pretty cool, but it doesn't hold my bike any better than a regular kickstand, so I might have made it work better. I went back to my kickstand after taking it off. You can see the need for a flat level surface in the video. If you had a child seat on the front or back, you could park the bike upright. I'm not sure what problem this will solve that a regular kickstand doesn't already handle.
👤It feels like a solid construction. The way the legs spread open when you kick it down and how they pull up to the left side of your bike is something I like. It's really cool that it stands vertically. If you have a U-lock on the handle bar, the one-legged kickstand is not a good idea because it tilts the bike to one side. But not this one. It's a lot more stable than a single-legged stand and you can add weight to your rear basket with this one.
👤I was torn between this stand and the two-legged horse. The option to adjust leg length without cutting made me choose the BV. I don't regret it. It came with everything needed to install. My bike had a mounting plate. If your bike requires it, the two mounting screws of different lengths are included. Adding padding to your frame is all you have to do. There is a The stock length was perfect for my bike and it was easy to adjust with allen screws. It provides a solid stand while lifting the wheel off the ground. It's high enough to provide the option of an emergency workstand when removing the wheel. It was very helpful on my belt drive bike to fix a flat in the rear. It folds up to the non-drive side and clears the rear wheel and crank arm on my bike. It's good for parking on soft ground with built in feet. There is no need to buy aftermarket rubber feet. A kickstand with good function at a very good price is all in all a solidly built one. There is a I added some pictures to show how it is mounted on my bike.
👤Great product. A man swore he'd never put a kickstand on a mountain bike. Started riding about 25 years ago. There were many up-and-coming world class mt. Bike racers are in Colorado. When I purchased my first mt. I asked where the kickstand was. The sales staff stopped crying after they explained that real mountain bikes don't have a kickstand. Things are different now than they were in the past. Back then, there weren't kickstands that were functional and also had a cool look to them. It could have been quicker, but I had to use my bike frame access. The designer put the adjustment screws on each leg, facing the same side, which makes it quicker to adjust both legs. It has a nice look to it, rather than being a box-store kickstand. There is a If you adjust the legs to where it raises the back wheel an inch or two off the ground when the kickstand is down, it will make it easier to service your rear wheel and gears. I will echo that it is not necessary to buy one of the look-alike versions of the kickstand that are selling for around $35 and $75. I watched a lot of the videos. This might not be a kickstand for hard-core, heavy hitters. The bikers are outside. This would be a good option for most of us. I don't see why a person would spend 2x - 4x the cost of this one for the same caliber kickstand, since the kickstand is well made, looks durable, and easy to install. I can't believe I'd ever write a review about this, and I recommend it to everyone. As we grow older, our sense of being functional starts to outweigh our desire to look good. It's funny.
What you get is a bike kickstand. The bike kickstand is suitable for most mountain bikes with wheel diameters of 24-28 inches, 700 road bikes, adult bikes, BMX, sports bikes, city commuter bikes, children's bikes, and folding bikes. The bike kickstand is made of durable aluminum alloy with non-slip rubber pads, which can prevent the bicycle from sliding on wet or smooth surfaces, or prevent the bicycle kickstand from sinking into mud, effectively keeping the bicycle stable stand or park. The side stand can be adjusted between 13 inches and 15 inches with the help of the middle screw. The bike kickstand can be installed in a range of pipe sizes. It's easy to disassemble. The bike kickstand can be easily installed with the help of the hex wrench. Remove the nut from the back of the bicycle and install the bicycle kickstand into the bolt. The bike kickstand is an excellent replacement for training wheels, suitable for children's bicycles and balance bicycles. The bike kickstand is an excellent replacement for training wheels, suitable for children's bicycles and balance bicycles.
👤I used this on a bike that had its kickstand removed. I like that it doesn't interfere with the pedals when moving the bike. If the bolts that tension the stand into the bike are not TIGHT, it will cause the stand to rotating around the frame, even if it's the proper oval shape. Check and tighten the bolts. The bike started leaning after I loosened them from summer to fall. I like the way it is, it's not like the original mid mount stand.
👤The stand is stable but can break. I bought one a month ago and it looks great. The bike snapped into 2 pieces when my son leaned on it. An iron stand is not recommended for a MTB. This was our fault and not a flaw in the product.
👤Look at your tire size, that will tell you what size bike you have. It is easy to install with all the tools needed.
👤The kickstand I loved broke in half when I lost my balance getting off my bike. I think it was my 3rd ride out after installing. It is made from a metal that is very brittle. You will be okay if you don't lose your balance and don't put weight on it.
👤Mi bicicleta de 29 is utilicé. Ahora de detenerme, tienen una prctica a la hora. y no on otros.
👤It has a problem with groceries, if bike is heavy like ebike. I expect a lot from this unit. I'm sure it works for a regular bicycle.
👤The stand will only fit on a chainstay. It's too short. There needs to be at least a 17 inch stand.
👤As tight as I can get, I will slip. I wouldn't recommend a medium to high end bike.
Bicycle kickstand 26 inch center mount products from Karetto. In this article about bicycle kickstand 26 inch center mount you can see why people choose the product. Bluesunshine and Gamexcel are also good brands to look for when you are finding bicycle kickstand 26 inch center mount.
Karetto, Bluesunshine and Gamexcel are some of the best brands that chosen by people for bicycle kickstand 26 inch center mount. Find the detail in this article. Bestcan, Bv and Cyfie are also brands that their products are worth to check.