Best Bicycle Indoor Storage

Indoor 20 Aug 2022 10+ Comments Open

1. Bikehand Floor Parking Storage Bicycle

Bikehand Floor Parking Storage Bicycle

ChainBrite Chain and Component Cleaning fluid is plant-based and will not harm plastic, rubber or carbon fiber. Patented simple push in design is easy to use. You need to lift the bike and put it in the stand. When you push the bike into the rack, the front holder will tilt. Heavy bikes such as downhill, mountain and beach bikes will be perfect for this design. The most stable bike stand has three points on the tires, which is better than other stands which only have one or two points on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel stays in the holdder because it's deeper than others. The dynamic stand base makes it impossible to tilt the bike if you push hard. It is possible to fold the stand into a flat shape within a second with a simple one-pull-knife. Your bikes will not be lying on the ground anymore. The steel is heat treated and has a fantastic powder coated finish. If used correctly, this stand will last forever. All bikes are compatible. The bike stand will fit almost all bikes, but only those with the tires more than 2.4" in width. You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality.

Brand: Bike Hand

👤After years of leaning my bike against the wall, some serious smudges had developed. I bought this to store my bicycle upright, but not against the wall. There is a It works, but not well. The rack is too light to support my bike with my panniers, and it doesn't have enough weight to stay in place as I attempt to roll my front wheel into the well. When I try to put my bike in it, the rack scoots away, and unless I'm very careful, it leans into the wall. There is a I recommend the procedure if you've purchased this. To orient the rack, drag it away from the wall. 2. Use your foot to tilt the mechanism. Roll your front wheel into the slot and secure the rack with your foot. 4. Lift the back of your bicycle and orient it straight behind so that it has the best chance of standing up. 5. If you have a weight on your bike, you should turn your front wheel and rack towards the weight so that you can form a triangle with the ground. There is a How to remove the bicycle from the rack? I haven't found a way to keep the rack in place. There is a It seems like the greatest improvement would be to weight the base of the rack so that it's more stable.

👤I was afraid that my road bike wouldn't be stable in this storage stand. There is nothing to worry about. It keeps the bike stable and holds the skinny tires. It was well designed. Excellent product.

👤I was tired of putting my expensive road bike up against the wall and hoping it wouldn't fall over, and also scratching up the walls and possibly the bike. I wanted to keep it standing up without having to lean it against a wall. I agreed after reading a post that said your expensive bike deserves a quality bike stand. I initially ordered a different stand. It was $5 cheaper than this one. The one that popped up on my screen had an extra component that they call the "push-in simple design and the wheel sits deeper." I ordered it from Bikehand after I saw that it had a lifetime warranty. The stand works well and the wheel slides in so the bike stays up. The bike has 700c x 23mm tires and works as advertised.

👤I bought a bike stand to help organize my garage and not have a bike leaning on it. My bike does not take a kickstand very well. I needed something to keep it upright. The rear section of my bike is very heavy and this stand balances it very well. The stand stays planted even if the bike is moved or worked on. The bike I have weighs a good deal. The stand was worth every penny if it could keep my bike up. It collapses when you don't use it.

👤The stands seem to be well made. The manufacturer has no fault in the fact that they tend to move when you push the bikes into them. You can use your foot to support them. The stands shift when the bikes are taken off the stand. I thought about it and did the following. I thought I could use the wall to keep the bikes from shifting. 1. I bought a plank of 8 feet. 2. I parked my car at the wheel parking stop. It's 6 feet long and is sold on Amazon. 3. The lumber was cut to 6 feet so that it would be the same length as the stop. 4. I bought a lot of deck screws. 5. I drilled small holes in the parking stands and then moved up to a bit to fit the deck screws. 6. I marked off the wood plank where the stands would be installed. 7. I made small holes so the screws wouldn't split the wood. There are 8. I took a battery powered driver and drilled them through the plank. Don't overtighten. The stands are secure. No shifting at all.

2. Begona Adjustable Space Saving Stationary 20 29Mountain

Begona Adjustable Space Saving Stationary 20 29Mountain

To ensure a great shopping experience, the bike stand has undergone at least 3 times of inspections. If you don't qualify for the bicycle stand rack, they will replace or refund you. Space-saving, Multi-occasion use. The base of the bike stand is higher than the upright bike rack, freeing up 4 feet of floor space. Storage is easy to outdoor and indoor, including garage, apartment, living room, bedroom, park, gym, workshop, warehouse hallway or other narrow space. The design is safe, steady and labor-saving. It's easy to put the bike on the floor stand rack. The upright bike stand has long support legs and a higher base to protect the floor from damage. This will be more stable in windy weather than other rack bases. Easy Assembly andAdjustable Height. Independent floor stand bike rack, fiting for different indoor heights, without drilling and will not scratch any walls and ceilings. The red rubber hook keeps the tire in place and makes the bike stable. The screw can be adjusted according to the size of the tire. Installation can be completed in a few minutes with a detailed manual. The stability of the vertical rack is better than the rectangular base, which is not easy to tilt or shake. You can store the bike vertically or horizontally. The max vertical height of the rack is 1290mm and the max tire width is 2.42”. The surface of the upright bike rack is evenly coated with high-quality steel and powder spraying technology, which makes it rust-proof. It can maintain excellent state, long-term use and stability. The product has undergone at least 3 quality checks. They support a return service guarantee if there is any unhappiness with the product. The surface of the upright bike rack is evenly coated with high-quality steel and powder spraying technology, which makes it rust-proof. It can maintain excellent state, long-term use and stability. The product has undergone at least 3 quality checks. They support a return service guarantee if there is any unhappiness with the product.

Brand: Begona

👤We bought 3 of these stands. I have tried other carpets but they did not offer the stability I was looking for. We didn't want to hang our bikes on the wall, so I wanted to try this stand with the wider stability legs on the carpet. It works well. The legs are easy to put together, but if you put them on a ceramic floor, the stability would be even better. Very happy with the product. Excellent organization.

👤I tried to assemble this after a long day. I needed some close up pictures of the rack to understand the instructions. Does the red piece stay on? Some pictures it was on, some it was off. It stays on. Getting my bike onto the rack and figuring out my adjustments was a challenge. Those are all the negatives. I got it together and adjusted it. It works. My bike is now in the stand vertically, with a rack on it. It saves me some space in my apartment. All is well that ends well.

👤The only negative thing about this product is the cheap aluminum nits and bolts. There is a I had to adjust the pads for the rear tire on my 29er MTB because it wouldn't go through and get stuck. It turned out great once I figured that out. I would definitely buy this product.

👤The build quality on this is not good. Half of the bolts don't line up. I needed a metal file to make them bigger so I could get the bolts through, but the metal on the bottom of the stabilization bar was too wide and the bolts were too short to pass through it. The holes for the spring loaded pins that attach the legs to the base were positioned so that the clamps that hold the bike wheel to the base pushed the pins in and made the legs unstable. These issues make it not safe or stable. I have it wedged between a couch and a corner, but a stiff breeze would blow it over. I don't think this is a good idea.

👤The tire stand has quick release buttons. The tire holder brackets could be interfered with by the quick release buttons. The installation felt flimsy, but it is doing its job.

👤I had to use gorilla glue for the pieces to be stable and not wobbly even though I tightened things. I have to lift the bike a bit to put it in, otherwise it will slide across the floor until the wall stops it.

3. CyclingDeal CD SJ01 3

CyclingDeal CD SJ01 3

Wall bike rack works for most bikes, like road, mountain bike, cyclocross, hybrid, beach cruiser, BMX and kids' bikes. It's ideal for bike storage in home, office, garage, apartment or bicycle shop. There is free up garage space. Are you looking for a way to save floor space in your garage? You've been looking for this one. The wall mount rack is great for use in a garage or apartment. If you want to get organized, hang the bike on the wall to make room for other items. The design makes it easy to take out or hang up your bikes, and it also allows you to hang or detach your bikes in a second. No more mess! It's the same for most bikes. Most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles, are designed to fit this bike hanger. The Max Tire width is 2.32” and the wheels size is from 14 to 29". The Max tire width is 50mm. 25C. The whole rack can hold up to 60 kilogram/135 kilogram bikes in total, and each hanger can hold up to 20 kilo/ 45 kilo bikes. It is easy to install and suitable for both indoor and outdoor use. It's great for garage and shed storage. The wall has 4 screws on it. They recommend that you use studs to securely mount it, otherwise it will be on the wall. Standard wood studs and solid walls are compatible. You can watch the video in their listing. Premium Aluminium alloy is a practical and durable material. The screws and anchors are of the highest quality. The hooks on the rack are covered with rubber, so there's no need for you to worry that the hook will scratch the rim of your bike. Also comes with hooks for hanging your helmets. The holder position can be adjusted. ORDER NOW, WORRY-FREE! They can provide a lifetime warranty because they're so confident in their product quality. It was made in Taiwan.

Brand: Cyclingdeal

👤This rack is easy to install, rock-solid, and looks nice and clean enough to make our bikes look a little better. I have attached a couple of pictures of my install. The plan was always to store only 4 bikes after I got the 5 bike model. Our bikes all have wider straight handlebars, and those take quite a bit of horizontal space, so it's a good idea to allow even more width. The garage door is on the right side of my house, so the handlebars can't extend past it. There is a The only change is that the hangers are not permanent. I've got a low one on the garage door end to make hanging/relocating that bike work farther from the potentially closed door, because the high one is open on one side. These are adult-sized bikes. I might consider moving the rack to a back wall in the spring in order to get more space, but it works well. I don't know much about handyman skills, so have some tips for the job. The main metal bar is very sturdy and the rack is light, but a stud- finder was essential. 4 bikes that are not made out of adamantium are heavy. The only practical option in this space was the 3 wall braces I used. It is solid with 4 bikes and braces. There is a The mounting screws are thick. I had to drill full-length pilot holes with a bit and then hand-tighten the screws with a big phillips screwdriver because I couldn't tighten them with a drill. One of the screws did not have the phillips grooves on the tip. I had extras because one of the clamps wasn't being used. I didn't have to worry about my stripping getting in the way of me. I didn't have any on hand already, but I'm sure the hardware store has good replacements. I used a level that reached across two of the braces. Perfect leveling looks nicer and doesn't put more strain on any one brace. You want the braces to be aligned so you can slide the main rack bar into place. I slid the bar into the first two braces after getting one screw in them. I adjusted the position of the third before putting the first screw in, and if I loosen the locking bolts, the bar will slide easily. It doesn't take much to make that much harder, so it's worth being careful with their positioning. There is a The locking nuts on the hangers were annoying to tighten. I gave up before taking my photos, but have since gotten the left one tightened. This helps keep the wheel on the level. The problem is that unlike the locks for the main bar or accessory hooks, these locking nuts are in the interior of the brackets. It uses a small 3mm key. The space is very small. You only get a 70 degree turn when you get the key lined up into the bolt. You have to pull the key arm and reset it after it hits the hook. I slid the bolt into the main bar to minimize the amount of tightening that would need the key. This step would be a lot easier if there was a hex key that could fit into this space. Don't let that affect you. Again, I have minimal home repair skills and experience, and this rack is really simple, and I got it all done in a couple of hours. The stud finder and level were very helpful, and the power drill and large phillips screwdriver were all that was needed to set it all up.

4. Ultrawall Storage Hanger Garage 300bls

Ultrawall Storage Hanger Garage 300bls

Their first priority is your satisfaction. If you have a problem, just leave a message and they will find a solution that will make you happy. Large capital: The garage wall mount bike rack could hold up to 300 lbs. Bike storage can be tailored to fit your needs by attaching space to the rail. There is safety. The sturdy safety hook design is ideal for your garage storage. The bike storage rack is easy to attach and move around on the rail. Heavy duty mounting hardware. Bikes are not included in the kit for wood stud,drywall,create or brick wall. The material for resilience is powder-coated steel. The sleeves are scratch- resistant. The steel construction has a finish. The material for resilience is powder-coated steel. The sleeves are scratch- resistant. The steel construction has a finish.

Brand: Ultrawall

👤I was able to fit 6 bikes by alternating them. I would recommend installing on the studs. If you like clean walls, you may want to put up a sheet of plywood. The bikes will leave tire marks on the wall.

👤They make things look better. We have a large family with a lot of bikes. They are perfect.

👤This was purchased to hold four bikes in our garage. We have six bikes, but there is no way you can put six of them on this storage rack. Unless you have three bikes for 5-year olds. It is 4' across, and even if you put the bikes on it alternating front and back tires, it would be hard to get six across. I'm sure the manufacturer will say something different. There is a I had to put in some framing to make it work because my location was not on a wall. If I mounted this on the wall, I would recommend putting some tires pre-painted on the wall to protect it against tire marks. To keep the bikes vertical, I'm going to install a couple of 1.5 inch diameter pipes across the railing. There is a The instructions were very bad. My instructions show that this mounting rack is sold with garden tool hooks. There is no mention of how high to mount it, no mention of locating a stud so it can carry the weight of all the bikes you plan on hanging on it, just vague sentences. If you are going to mount this on a wall, I would recommend putting a strip of 1 x 4 across three studs with 3 screws going into the studs. The bike rack can be mounted to the 1-1/8" x 4-1/8" hole. I'm not sure how much stress this puts on the rim of the tire since it is carrying almost all of the weight. It isn't bad for the price.

👤The bike rack is perfect. It comes in two pieces. I put a 24 inch rack in one location and hung 3 bikes there, and the second 24 inch rack is available for 3 more bikes in another area. The mounting screws and plugs are provided in the instructions. The garage I have has a plastic garage tech wall panels which I did not need the plugs for. I installed both pieces in 15 minutes. There is a The rack and steel distribute the weight evenly. If you use a high speed drill with a screwdriver bit, be careful with the screws as they can strip. The hooks are larger than I expected. I hope you are as pleased with the rack as I am.

👤How well the plastic anchors hold up in a Florida garage? I installed it by the instructions. It is 24 hours later. I said this to my wife last night.

👤Did not have enough screws or anchors. The anchors it comes with are for brick walls only. If you want to hang this through a dry wall, wood or anything other than brick, you need to purchase your own anchor and screws. I used a very strong anchor and screw for the drywall that can hold up to 250 lbs per anchor and with 3 kid bike's on one pad, it was too heavy and pulled several of my anchor and screws out. The metal surrounding the screw hole was broken when it pulled my anchor out. I don't recommend this product until they provide customers with the appropriate hardware. It took us an hour to install and another hour to pay for it. I'm not happy.

5. Delta Cycle Home Stand Basket

Delta Cycle Home Stand Basket

The maximum tire width is 2.1′′ and the recommended wheel diameter is 29′′. The Canaletto four bike rack garage is safe for up to 4 bicycles. The Canaletto garage bike rack is easy to install, you just need a screwdriver. Assembly hardware is needed to build a bike rack. Arms can accommodate any bike size or style up to 40 lbs. This rack is easy to adjust once assembled because the support arms are repositioned with a simple twist. This large capacity vertical bike rack securely holds up to 4 bikes and a total weight of 160 lbs. The rubber feet keep the bike rack in place. Over 200,000 cyclists trust Michelangelo bike storage racks. Delta is the brand you can trust with best-in-class U.S. based customer support.

Brand: Delta Cycle & Home

👤This item works well, I needed it to help with my bicycle storage. I saw a "Wobble" when I removed the bike from the top. Otherwise works well. I'm 6'3 I have between 40 and 61 cm bicycles. All fit on the rack. I had enough space to work on my road bike. Would buy again.

👤The 4 bike version is stable, easy to put together, and is easy to improve with anti-slip wrap. The weakest point in this design is the low quality screws strip after first install.

👤The spare room of my apartment was cluttered with bikes, which is why I got this bike rack. This has given me more room. I have a mountain bike, road bike, hybrid bike, and 29” mountain bike all on the rack. They all fit. It is easy to load. I don't feel as if my bike is sturdy when I ride it. It is best to get all of the bikes on before you decide where the little basket is located. The hooks that hold the bike are not screwed in, instead they hook around the uprights and can be moved wherever they are needed. I had to move the basket because it was where I needed one set of hooks. I am very happy with my purchase so far.

👤I put all of the bikes on it myself. I like it. It frees up some space in the garage. I got the one with the basket that fits two helmets, but you could put other items there. I didn't give 5 stars because it isn't fully flat on the ground, and the "O rings" that they give you to level it weren't enough. I'm not afraid that it will tip over, it's still sturdy. Overall, I am happy.

👤I wasn't sure about this rack, but it was easy to assemble and hold our bikes. I put a 10lb weight on the rack because it gets bumped in the garage and it doesn't need any extra bracing. Really good rack. Would recommend.

👤I love it! I'm happy I bought this. There was a lot of space for all of our bikes. I'm very happy!

👤This is a great space saver. There are no holes in the wall that can hold up to four adult bikes. We had to drill a hole in one of the pipes to get a screw. We put it together. Highly recommended! It's easy to move around with no bikes on. If they were on the floor against a wall, would they take up more room?

6. Vibrelli Bike Wall Mount Horizontal

Vibrelli Bike Wall Mount Horizontal

Good service. They are behind their products. The bike is built to last. Their service team can help their customers. You can contact them if you have a question. They're happy to help. The bike storage system needs to be installed on a concrete wall or a stud behind it. The bicycle wall mount is a great way to save space in apartments, homes, garages and sheds. The patent pending design works for most bikes. The bike wall mount slides out from the wall to fit narrow and wide handlebars, and the push button design makes adjusting the rack for your bike frame easy. The frame cradles are flexible to mold around the bike frame and won't scratch the paint. The front wheel has straps that prevent it from swinging. This rack is made from welded steel, not aluminum. It can hold bikes up to 55 lbs. Installation is easy to use and follow written and video instructions. Only for installing to wooden studs and beams. If you want to install directly on the dry wall, you should install to the supporting stud/beam. The 10-year manufacturer's warranty is included in the Ironclad Warranty. Cyclists designed the building to last.

Brand: Vibrelli

👤I've had this product for a month and it's perfect. I agree with the reviews that suggest paying attention to the type of wall you have. If this will be a sheetrock installation buy a plank from other reviews. You do not need a 2x6. I fastened the plank to the studs with wood screws 10 x 2 and 10 x 3 and used a stud finder to locate the studs. I used the screws in the package to fix the bike mount. The arms adjust to fit the angle of the frame with the push of a button and the rod adjusts so the bike handlebar fits against the wall. There is a If you have basic tools, you are good to go for about an hour.

👤It is as easy to install as you think, but you have to follow the instructions. You need a bit of masonry if you are going into brick or plaster. You need to be responsible for anchoring this in. I used the hardware provided without incident, but I think it would work with other anchor that are meant to carry weight. There is a It took less than 20 minutes to install. I ride my bike twice a day so there is a lot of moving the bike. The piece is anchored into the wall. The bike is more handsome and my place is more organized and tidy with it up on the wall. I can change the angle of the bicycle with the arms being adjusted. There is a I would hire a handyman or a professional to anchor this into the wall if I wasn't sure I could do it, because it would be disastrous for the wall, pets, or even people. First of all, safety. There is a I cannot recommend this product enough. Excellent design, simple and easy to install. I would give it six stars.

👤I can't recommend this design because of specific installation details. I've had a lot of problems and expenses to get this thing up and stable. The sheetrock was pulled away from the wall and came out completely. I consider myself a competent homeowner. On 8-19-2010. There is a decent rack with utility in many locations. The depth of the arm cups that hold the bike frame is a big plus. The bike and rack are secure, but the pipe that holds the two arms surprised me. The included hardware is bare minimum and bolts are too short. The hole diameter is too small, the bolts are included, but any installation other than the one provided for is going to require boring into the steel plate. I think a cheap mod for Vibrelli would be the ability to lock a bike to the ount.

👤The bike rack can handle wider handlebars than almost all of the other racks, that's what I like about it. I like its design and simplicity. It seems sturdy. How could it improve? There are two ways to do it. It's easier to put three screws into a 2x4 stud hidden behind a wall than it is to put them into it. It's very likely that not all 3 screws will find good wood in the side of a hidden 2X4 because it's more like 1 and 1/2th wide. I assume that the rubber cushions for the bike frame have multiple fingers so that they can work with multiple frame widths. I found them problematic when trying to place a bike onto the frame, since the fingers kind of get in the way and challenge your ideal placement. A simpler cushion design would work better. I still think this is the best rack for bikes, even after researching several other products. Should I ever add a third bike, I would buy another one.

7. TORACK Storage Vertical Bicycles Space Saving

TORACK Storage Vertical Bicycles Space Saving

If you are not satisfied with the product you received, please contact them to help you return or exchange it. A bike rack garage is a great solution for your garage organization. The finish rails and sleeves hooks are coated with a powder. The bike storage solutions are CONVENIENT. It's easy to organize and clean your garage with bike racks. The bike racks are mounted on the wall. MULTI-SIZE BIKE HANGER- Hang up fat bike tires. It's suitable for mountain bikes, road bikes, folding bikes, adult bikes, and kids bikes. The hook spacing needs to be adjusted. The snap-hook design makes it easy to snap on the rail. The rail interlock design can combine rails. Stable snap hooks make hanging up and taking down your bike easy. It is safe. There are rails and sleeves coated with rubber. Excellent durability with anti-rust, anti-crack, anti-scratch, and anti-slip functions. Heavy-gauge steel construction is used for safety loading. GS is certified. Some customers don't know how to use expansion screws, which causes the hooks to fall off. Please use a drill bit. As thick as the screw. You can learn how to use expansion screws on the video site. If you want to fix the wood, please use only screws. Some customers don't know how to use expansion screws, which causes the hooks to fall off. Please use a drill bit. As thick as the screw. You can learn how to use expansion screws on the video site. If you want to fix the wood, please use only screws.

Brand: Torack

👤I can fit my four bikes with enough space.

8. Delta Michelangelo Two Bike Gravity Stand

Delta Michelangelo Two Bike Gravity Stand

It isdurable: The bike workstand was released to the market for a long time. One of the most reliable and durable bicycle repair stands is available for home or shop uses. They can keep enough parts for any claim in their warehouse, and offer a 5 year warranty on the rack. Bike storage is space saving. The Michelangelo 2 bike rack garage uses gravity to secure up to 2 bikes. The assembly was easy. The Michelangelo garage bike rack is easy to install. Assembly Hardware and a wall strap are included. In Minutes. Arms Accommodate Any Bike Size Or Style, Up To 40Lbs. The support arms are repositioned with a simple twist, which makes it easy to adjust. This large capacity vertical bike rack is made of quality steel and holds up to 2 bikes and a total weight of 80 lbs. The rubber feet keep the bike rack in place.

Brand: Delta Cycle & Home

👤I had high hopes for this bike rack. The stand will work perfectly despite the flimsy look, according to all of the reviews. Wrong. I have a small hybrid bike. My boyfriend has a bike. We could not get the bike to hold the bikes in place, which is a reasonable expectation for a small and Medium sized bike. There is a The older reviews seem to have been before the materials were changed. The rack I received had no red details. The grey grip that should hold everything is meaningless. When we put a bike on the rack, the arms that are on the frame start to slide so that both arms are on one side, and the bike slides over and one tire rests on the floor. Adding a second bike on top is a bigger disaster as that bike does the same thing and it rests a tire on the bottom bike, looks hideous, and I might as well have leaned the bikes on the wall. I tried spacing the arms further apart, swapped the bike places, but with the arms sliding wherever they please, it just wasn't working. It's a hassle and a waste of time to return it. I was looking forward to being able to store the bikes indoors, but I'm disappointed. The search is on.

👤It doesn't seem like it should work, but it does and it's amazing! It took a couple minutes to put the stand together. It leans against my wall and takes up very little space. I think it looks cool that I can get my bike up and out of the way. Everyone is surprised when they first see it and they have to touch it to believe it's strong. There is no chance of the stand tipping over because the bike is pulled towards the wall. I think this is a cool, well designed product and would recommend it to anyone looking to free up some space and store their bikes.

👤I don't feel very enthusiastic about this stand. It does the job, but has some design flaws. I'm not sorry I bought it, but I probably wouldn't buy another one. It does get the job done and is cheap compared to other bike stands. It was not easy to install the screws. The two pieces were not aligned correctly. There was no way to get the angle right to screw it in. Since gravity keeps the top piece on its own, I have set it up with a missing screw. It has not collapsed in 2 months. There is a The feet are not very stable. I have it on a hardwood floor, and I have noticed that it slowly slides forward over time. I have had to pull down my bikes, adjust the rack, and replace them twice because it had slipped too far for comfort. I might need to change the shoes for it. If I'd secured the top part to the wall with a screw, I might not have had this problem. There is a The bad news is that it doesn't hold my bikes well. The handles stayed put after I arranged them. The first day was rough, and I had a hard time getting the handle positioning right. Your bike's geometry and weight distribution will affect the relative heights of the handles. Try to angle them as far out as possible. I wish there was an extra piece to keep the front wheels in place, because they can turn and damage the wall. I rigged up a utility hook between the top front wheel and the wall to prevent this, but it's a little awkward. The utility hooks are not made for this purpose and are a bit too short, but they get the job done with a bag hanging off it. There is a It's a decent product. It works, but not fancy. It's cheap.

9. Folding Parking Bicycle Holder Storage

Folding Parking Bicycle Holder Storage

A life time warranty on top quality. It was made in Taiwan. The product weight is 1.96 kilograms. 4.35 lbs. Saving storage when not in use or to carry it into the car when going riding with a Traveling Bag and foldable. Your bikes will not be lying on the ground anymore. The bike's front rear wheel is much deeper than others, so it stays firmly in the holder. The dual arm is better for heavy bikes. The corner of your bike has a coating on it to protect it from nicks and scratches. The arm is spring loaded so it is easy to hold the wheel. The bike holder is portable and lightweight, it only weighs 3.5 lbs. If you are not satisfied with their products, they will give you a full refund. If you are not satisfied with their products, they will give you a full refund.

Brand: Auwey

👤The stand has legs that can be folded. That sounds great. It is a flaw. When the stand is on the floor it causes instability because the legs fold back a little. It is too light. The first flaw is worsened by it moving easily. I returned it because it was so bad. I have similar floor bike stands that are more expensive but worth it.

👤The bike stand is supposed to hold the bike so it stays upright, but the legs on the base tend to fold inward, which causes it to lean and eventually fall down. The stand is67531 in the garage next to the cars, so it is67531 in a more open area.

👤I bought 4 of these and am planning to buy 1 more, so there's more good than bad. There is a They are easy to transport and hold the bikes well. There is a The only negative thing: The units can slide on the floor of the garage and cause the arms on the side of the units to try and fold. Not enough bikes will tip. It does diminish security. While loading it can move relative to the arms which have grippy bits on the ends because there are no grippy bits on the center structure. The center member is moving forward with his arms. My children find this frustrating. Adding a locking detent would probably prevent sliding. I don't recall if the legs are held with screws or rivets, but if they are, it could be a place for a smaller person to step to prevent forward motion.

👤I have been using this stand in my apartment room. After 7 days, I can say that this item is 5 star quality. There is a There is value. Stable. The feet are soft to protect the bike. I don't own a work stand. I can work on my bike infinitely easier with this floor mount. 5 stars will buy again.

👤My wife's Cannondale has 26" wheels and this is working great. It wouldn't work for my Trek tires, which are just to fat. I would get another bike if I needed one.

👤I tried a Delta stand that was a bit different. This is a replacement. It seems like a good stand after saving some money. There is a small wobble in the parked bike, but nothing that concerns me. I know they're decent and will be ordering another one. The product is good at a good price.

👤It works well and it's a fair price. This product is very good and I would highly recommend it. I think it's a good idea to include instructions, because those not overly mechanical might find folding the stand a challenge.

👤If you push forward on the bike, the legs will collapse and you will have to pit the bike in the cradle. It works for a hallway or garage.

10. Bike Wall Mount Horizontal Bicycles

Bike Wall Mount Horizontal Bicycles

Keep your garage or indoor space tidy and free up your floor space by storing your bike in a convenient location. Their wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Most bike types have a storage system. The bikes can hold up to 22 kilogram. Not suitable for bikes with wide handlebars (31 inches / 78 cm) or fat bikes. It is safe and secure to store your bike in a horizontal position. The wall mount is made from strong steel. The bike arm locking mechanism uses a reliable gear system. The angle of the wall hanger can be adjusted to keep your bike level. Installation instructions and mounting screws are included. The push button lock system ensures that the frames can be secured, and the cradle arms ensure that all the frames can be accommodated. A secure push button mechanism secures the extendable beam from 8.7 inches up to 12.6 inches. The Armcradles are made from soft TPR rubber material that will not scratch your bike. The frames are protected and the tube shapes are not marked or moved. To prevent front wheel from knocking against your wall, you need a rope that is strong and elastic. If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it.

Brand: Pro Bike Tool

👤The rack is nice. It is built out of quality materials and has a lot of flexibility. The mounting points for this rack are a bit odd. They provide you with 3 small screws and masonry wall anchors, when they should have provided a beefier faceplate and 2 lag bolts to mount into a stud. My solution was to take a piece of scrap wood and mount it vertically to a stud using 2 heavy duty lag bolts, then mount the original screws to the wood. The rack gets 5 stars from me.

👤I was concerned my handlebars were too long for your wall mount, so I sent Chris a letter. To make sure they fit, I put a 2x6 board on my wall stud and then put a wall hanger on the board. It allowed plenty of room for the handlebars. There is a I had a problem attaching the hanger to the studs behind the plaster board. There is a one and three-eights inch distance between the wall hanger's two holes. The wall thickness is one and one-half inches. There is no time to get a strong attachment with only a quarter inch overlap. The instructions give a good idea of how to install the hanger on the wall. They warn that the plasterboard won't support the hanger. Very true. The wall stud's width is insufficient. Instructions to attach a 2x6 to a wall stud and then attach a hanger to that board were added by me. There is a The cradles for the bike are red or black, which is a point of favor for the Pro Bike system. The shape of your cradles allows room for the control cables if the bike has them beneath the cross bar. Great feature. There is a Thanks for your help. I hope my experience is useful to others. You have a good product.

👤Highly recommend this bike storage system. Enough about how great it is. I want to know how to install it. You probably do as well. I installed 3 holders. The first thing to do was to find the studs. To double check the exact location of the stud, I used a finishing nail and hammer to find the sides of the stud. I was glad I did because some of the stud finders locations weren't right. There is a You can mount the 3 holes of the brackets into one stud with longer screws than those that come with the kit. Some people have said this works. It didn't seem like it would be stable. I decided to mount a 2x6 across two studs. A 2x4 is not wide enough. I cut the 2x6's 22” long so they fit over the end of each stud. I used lag screws to attach the 2x6's to the studs. I used lag screws on both ends. There is a You will need a impact driver to get the lag screws into the stud. A regular drill won't do it. If you don't have an impact driver, you can always use a sockets wrench. After I tightened the lag screws down, I had to use a sockets for the 5/16 lag screw. I measured the bikes with the holder to make sure there was enough space between them. The measurement resulted in a spacing of 40” from the top of one board to the top of the next board. It was perfect for my bikes. Different spacing is required for your bikes. The wall mounts are perfect. Unlike other systems that are horizontal, these allow you to adjust the arms to fit the different types of cross members as not all bikes are alike. I think they are worth the money. The 2x6x8 was $11 and the 12 lag screws were $9. If you decide to purchase these, I hope this helps.

11. Clothink Bicycle Cycling Parking Foldable

Clothink Bicycle Cycling Parking Foldable

No hooks, straps, bars or other equipment is needed. Installation and mounting hardware is included. It's alright. The oxidation process makes the surface glossy. The corner has a coating on it to protect it from nicks and scratches. The arm is spring loaded so it is easy to hold the wheel. The bottom has padded feet to protect the floor. The stand can be folded into a flat shape with a single pull-nob. When folded, it's an inch x7.16(W)inch. Storage can be carried into the car when not in use. Your bikes will not be lying on the ground anymore. Push is quick and easy. The patented design will hold your bicycle steady. Set-up and fold for compact storage to save space. The stands have only one or two points holding on the frame, rim, disc rotor and derailleur, but the 4 points on the tires are much better than that. The bike's front wheel is deeper in the holder than other bikes, so it stays in the holder. It is better to have a dual arm stand than a single arm stand. The bike rack is universal and can be used for many kinds of bikes. It is suitable for 650C - 700C Road Bikes. Bikes with tires more than 2.56 inches are excluded. It is strong enough for all types of bicycles.

Brand: Clothink

👤The product description says it has indoor cycling. It's only a stand. You cannot use it for an indoor trainer.

👤I'm not sure if I'm missing something, but I don't understand the reviews for this stand. It's mediocre in the couple days I've been using it. It's difficult to lock my bike up because it slides all over the place. I think I have figured out how to hold it in place while I load the bike, but it's awkward. I could live with that, but it doesn't hold the bike up very well. I wanted something to set my bike up. That's right, if there is a slight change in weight distribution, that's when the whole thing ends.

👤Not impressed with this. I bought this stand for my mountain bike because it has wide tires. When I try to load the bike into position with the "foldable feet", they fold and the stand twists, and the front tire will not lock into place. I will have to make some changes to my feet. I have other bike stands that are easy to use and hold the bike. This one leaves a lot to be desired. May be junking it. It was an expensive mistake.

👤I love this bike stand. It works great with my bikes, which range from 27” to 29” tires. It is a great price and you can't beat the convenience of this product.

👤It can be folded when not in use. I don't like the fact that it folds and there's no way to lock the arm in place making it hard to put the wheel in. If you need to store it, it folds into a small size. The bike is held steady once you get it in the stand. The folding arm is the only nit. There is a bike room in my condo and the bikes are stored against the wall. It can be difficult to get next to your bike to push the arm forward to put the wheel in. This would be the perfect stand with more room.

👤Not a good fit if bike has knobby tires even though the width of my tires should fit, so tire will sit down into holder. The side supports tend to fold in when trying to roll a tire. Side supports should be wider. The whole stand slides forward and side supports collapse if the top roller guide is not pushed back by hand.

Summary

What is the best product for bicycle indoor storage?

Bicycle indoor storage products from Bike Hand. In this article about bicycle indoor storage you can see why people choose the product. Begona and Cyclingdeal are also good brands to look for when you are finding bicycle indoor storage.

What are the best brands for bicycle indoor storage?

Bike Hand, Begona and Cyclingdeal are some of the best brands that chosen by people for bicycle indoor storage. Find the detail in this article. Ultrawall, Delta Cycle & Home and Vibrelli are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com