You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. The bike stand has a simple push in system. The bike will stand stable if the front wheel is pushed into the rack. It's also suitable for road and mountain bikes. The most stable bike stand is the folding alloy bicycle stand. The bike's front or rear wheel stays in the holdder because it's deeper than others. The stands on the round could be used for a bike stand. The foldable bicycle wheels holder is made of 5 folding systems. One of the stands is a wheel stand. The bike stand can be folded into a box. Storage convenient when not used. The RockBros folding bike stand rack can fit up to 29 wheels. The front stand can fit any type of wheel. Every member of the family can use it if you buy it for them. When there is no parking in the school, it will be a good help. If you and your friends want to have an outdoor bicycle race, it could be a perfect temporary parking space. DURABLE & STURDY: The bicycle stand rack is made of aluminum. The corner has a coating on it to protect it from nicks and scratches.
👤The stand was not stable enough to hold a 29er. The lightest wind would cause my bike to fall. There is a The retaining pin that is supposed to hold the stand in this state failed. I tried to tighten up what I could. I wish there was a way to lock the legs in the outward position so they wouldn't fold in the process of putting your bike in.
👤I've been looking for a bike stand like this one. Our mountain bikes were kept in the garage. It was perfect for our mountain bike tires and 700c wheel size hybrid bikes. The quality of the material used is very good and it is easy to use. The back legs of the stand will fold if you push the bike in but not a big deal as we found out that if you place one foot on the front leg of the stand then it prevents it from happening. We are very satisfied with this product and will definitely recommend it. The price is unbeatable.
👤El concepto es bueno pero es inestable. Hay pisarlo para puedas, pero se pueda an clar al piso. Eso, estoy pensando implementar, pero seria bueno, consideraran a dentro del producto.
👤It works well for indoor storage. On days I don't have my bike at the office, it folds up out of the way. I think it is more secure in my office than outside. I don't have a kick stand, so this allows me to store without having to prop my bike up against the wall. Sometimes the mechanism is hard to work, but otherwise happy.
👤They are holding the bikes. My wife's bike, with a basket and fatter tires, requires a little more care. The bike rack is not completely secure. To balance the bike, I brace it against the wall and that works for me. There is no issue with my bike, it is a more typical road bike and lighter. I use the stand for the rear wheel when I put the bikes end to end. Pull the bike forward off the rack. I have them in my garage with two cars, so the issue was space, these racks work as I had hoped.
👤The bike stand was broken due to poor packaging. The replacement was double boxed and arrived intact. There is a The stand is small for storage. It works well to hold the bike, but after a while the tire loses air and the bike falls over. It is so light that it needs to be held down with a foot or hand when it is moving. The bike can be removed from the rack. There is a I rated it 3 stars because it wasn't as easy to rack my bike as the cheap 2x4 rack I was using before. Even though I have 5 bikes, I will continue using the cheap 2x4 racks because they are much easier to use.
It is easy to install and widely compatible. The bicycle exercise stand is easy to assemble. Most road and mountain bikes with a tire width below 2.75 are compatible with a quick release skewer. Max. The bearing capacity is 300 lbs. SARIS NFINITY TECHNOLOGY recreates motion experienced outdoors. It's compatible with a variety of training configurations, and nearly every trainer is available. TRAILBLAZING: The MP1 Nfinity is a type of riding that has never been experienced indoors. Get adequate. You can put in miles by reducing the pressure on touch points. It's pure fun. A training experience that is responsive, immersive and authentic.
👤Even if it is overpriced, the platform is really nice. The trainer sessions are more comfortable in the saddle than without it. I have a big concern about the platform. The straps holding the trainer down are not industrial-grade. It feels weak and can easily be pulled apart. After receiving the platform asking if I could purchase additional straps to tie down my trainer, I opened a support ticket with Saris. We've been going on for 3 weeks now, and I haven't received a single acknowledgement of my request. I don't believe in Saris and if given the chance to start over, I would hold off on buying anything.
👤Details matter. The design was very good, but the thumb screws amd bolts weren't compatible. I would have expected something so sime to be right for 1200 bucks.
👤A must have for training indoors. It comes assembled. It is well made and can be delivered in 48 hours. I loved riding it today. It is very similar to e-rollers if you are familiar with them. I had no sore knees or feet after my ride. Don't think about it and buy it.
👤DCRainmaker and prior reviewers Negatives - price, some quality, really? 4 were loose and 2 were stripped. There were no T bolts for front rails and no coating on the bottom side of the rails. Is it $89 for assembly? There is no assembly. There is a Positives work well with the Kickr bike. The ride and axis work well. It was easy to setup. It reduces stress on the body. There is a The product was great. Improvements and a reduction in price are needed.
👤I called them for supper and they told me it wouldn't supper my bike. I removed the straps from the front wheel holder and it supports my bike.
👤The thing was very cheap, the straps barely hold down anything, and the motion isn't as fluid as it could be, which makes it hard to get out of your bike.
👤Adding the next level of motion to cycling is a must.
👤The company has been making products for many years. The fastening rails on the platform were not anodized. They have been used for six months and they are all very old. They didn't do anything after they submitted a ticket to Saris. The parts should have been made of aluminum. After only six months of use, no amount of sweat would have caused this oxidation. I don't recommend this product and would advise anyone interested in one of these to buy something else.
Fit with a bike that's less than 95 percent of its size. When working with rough tires there will be load noise. Quite when working with road bike tires. rubber feet prevent scratching wood floor, works on any surface. A wide base and low stance for unshakable balance was built. The max load is 330 lbs. It is easy to install and release. The quick release is used to tightly hold the rear wheel. It's easier to take the bike down than other bike trainers. Handle bar mounted resistance controller makes it easy to adjust resistance. Balance from bike trainer stand is compatible with any road or mountain bike with a 26-28" wheel.
👤It works for now.
👤I was hesitant about purchasing a stationary bike stand, but after purchasing the BalanceFrom Bike Trainer Stand I became a believer. There is a The stand was easy to set up, the only issue I found was the need for ties to secure the cable used to adjust the tension of the roller. After my first ride I was a little concerned that it wasn't enough tension on the wheel, but after a while I was over that concern. There is a My only complaint is that it's a little noisy. If you want to mount your bike on a step stool, make sure to secure the lock ring since it sits higher than normal. Nice product!
👤I have a mountain bike in an apartment on a higher floor. I returned the noise because I hate noise above me, and I feared it would disturb neighbors. The quality is decent, but my bike slipped off on my first use, it did not hold my tire well. I returned it because of the noise. There is a If you live above people, I would not recommend this, as they will be mad by the sound. I wouldn't subject another person to that. If you are using on the ground floor, please be respectful.
👤It looks like it was well made. I inspected it after setting it up and found it to be safe. The resistance wheel is useful. I used it on a bike and it worked well. I can tell it is the same as the other, but it is the lowest price supplier.
👤I bought a great product for my wife. She is short and once her bike was on the stand it was difficult for her to get on and off. May have to give it away.
👤I bought this because I have a condition that makes walking difficult. I didn't want to buy an exercise bike. I gave it a try. My husband put it together quickly. It makes a noise. It's not a big deal, as I use headphones while riding it. The regular bike functions still work and you can adjust the rear wheel's friction. It's a great way to exercise.
👤The stand is made of strong steel and plastic. The ride has a good range of resistance levels. The resistance knob is numbered from 1 to 8 with 8 being the least resistance and 1 the highest. It gets boring like all exercise equipment. While you get fit, grab a book or TV and a fan to keep you entertained.
The foldable framework is easy to use. The portable stand is lightweight and portable so you can pack and go, it comes with a sturdy bag for easy carrying and storage. When the weather is bad, it is annoying for people who love cycling. You can keep riding with this indoor bike trainer. You mount your bike on the trainer and begin to ride. The two knobs on the left and right of the stationary bike trainer make it easy to lock your bike in place. The joy of cycling at home. The indoor bicycle training stand is designed with dual-support structure to make it stable and steady. The package has a strong frame and front wheel riser block to keep it stable. The structure can hold up to 300 pounds. The anti-slip rubber feet fit for the floor in different conditions, preventing movement for stability on any surface. Smooth exercise bike trainer is needed for riding at home. The noise reduction wheel makes it hard to hear the wheel on the trainer. The material and tread of bike tires affect the noise. It is recommended to use slick tires to reduce indoor resonance or add a carpet under the trainer. If you owned rough tires, be careful. Even though the trainer is expensive, it is possible to be loud. It is designed as a folding style so that you don't have to carry it. You can begin to ride at home with quick installation. You can fold the bike trainer when you finish exercising. You can either put it in your home or carry it to another place. The Unisky indoor bike trainer stand can fit most road or mountain bikes with a 26-28" or 700c wheel. If you have a road or mountain bike of normal size, you don't need to buy a new one. The bike trainer is usually not compatible with electric bikes. If you're not sure, please contact them.
👤I bought this because I was reluctant to go to the gym. I was concerned that some reviews said it was loud and flimsy, and others said it was hard to install due to poor instructions. Here is my experience. Loudness. The bike we installed had knobby tires and high pressure against them to make it resistance high. How loud is it? You can hear music when you use cheap headphones. You wouldn't sit in the same room and watch TV. A) You can go down the hallway. Do a zoom meeting, shut a door, watch TV, etc., and be well isolated from the sound. This seems fine to me. There are two more We use it every day for over an hour on the average. It's made of steel and holds the bike in place. I could not describe it as robust. I don't understand the reviews. There are 3 more It is hard to assemble. I'm handy. I did not read the instructions. The rear tire will fit with the fixture if you remove a part from the bike. It was obvious to me. The only hitch is that the bike fits into the holders. I had to push it. It would be a better stand if it was a half-inch wider. It works well for us and is reasonably priced. Money was well spent.
👤If you don't have a quick release rear tire, there is another kit you have to buy to make your bike fit. There is a The other kit is not available.
👤This product arrived early and made me happy. I wanted to keep riding my bike through the winter. The product is perfect for that. The mat is to protect my carpet. There is a It is loud. It sounds like a vacuum cleaner. I live in an apartment. It had an easy setup. It took 10 minutes.
👤I tried my husband's bike after hours of trying to take my bike apart. It took 30 seconds for him to install his quick release rear axle. The product works. If you live in an apartment, beware.
👤I bought the Unisky Bike Trainer for my husband who loves to ride his Mountain bike outdoors but he can't because of a knee replacement. He takes physical therapy at the hospital 3 times a week and now he can work on his knee to get better. This is the present he received from me and his little princess.
You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan. Fix the bicycle front fork easily. Most bikes can be adapted with the fully adjusted fork-mount and flexible sled. 9mm quick-release and 12x 100mm, 15x 100mm, and 15x-110mm thru-axles are included. Please be patient when installing the thru-axle, please install the adapter smoothly and accurately. 5 level resistance can be adjusted. You can choose between 5 levels of resistance with the 4pcs of magnets. It's perfect for indoor training or warming up at a race, it provides a realistic resistance and quiet operation, and is close to the natural road cycling experience. Sturdy and safe. DEUTER bike trainers are made of high strength aluminum. Product loading capacity and safety were increased with the solid triangular design. Portable Trainers for Travel The portable bike trainer is easy to install. It can be folded, stored, and carried with the included heavy-duty tote bag, which is easy for transportation and storage. 100% money back guarantee. They know a lot about cycling products. They want you to be happy with your indoor bike trainer. Also, note: If you care about stability, please purchase carefully, there will be a little sway in front during the ride on the trainer.
👤This will help keep me in shape. It works great for the price, but there are some things you should know about it: - Once you get past the magnetic resistance, it's actually pretty smooth sailing, and gives a darn good.
👤I have used this item a number of times, and here is my pro/cons for it. There is a It's easy to set up and put away in a good case. The product feels like quality tools are included. It's hard to pedal on the rollers because it doesn't feel like a trainer. It's a constant uphill ride with a pedal glitch. It's difficult to use the pace/speed adjustments. The pedaling on the rollers is loud.
👤It's portable and will give you a workout. It doesn't feel like a true roller nor does it inspire confidence for harder efforts. I was very excited to receive the rollers. I've had them in my cart for a while. I picked this up for an upcoming trip that's going to require a 2 week quarantine and wanted to still be able to train, ride, and Zwift while I'm out of town. There is a The only thing needed was a 5mm key to attach the legs. Attach your bike, loosen the axle, loosen the nut on the sled, and adjust the sled and lock the nut by unfolding, popping in the front legs. It took me about 5 minutes to setup, with one of the legs being difficult to fit into the opening even with the adjustment screw loosened all the way. There is a Once it's attached, you can start pedaling for the first time. The rollers don't spin freely like on true rollers, and they feel much more like on-wheel magnetic resistance trainers. It's not an issue if you've had experience with magnetic on-wheel trainers, but for someone who's never been on one it can be a challenge. This is due to the fact that on this Deuter, as well as on-wheel magnetic trainers, and even regular rollers there is virtually no build up of angular momentum as you would experience with a direct-drive trainer or riding on the road. I took out all the magnets to see if the roller fluidity would improve. I ran through a quick workout after jumping back on and firing up Zwift to see if I could find any weakness in these rollers. At 50-16 on my road bike in a sprint section, I was able to muster up an average of 416w for 1 min, with a peak of 622w, which was the same as my last test. This. Something. Sways. Too much for me. The center fork support pole still has some play, even though the bike is firmly attached and all the adjustment screws are tightened down. It looked like it was a less easy to use version of the Feedback Sports Omnium trainer. The zero resistance version of the Omnium starts at $380, whereas this was $205 at the time of purchase. I haven't been to the Omnium before but the reviews seem to suggest it is a solid product. There is a The case was larger than expected due to the generous foam padding inside. I don't know if I would trust handing it over as checked luggage without a few additional straps. There is a I would rate this product 3 stars for the design and function, but 1 extra star for its portability factor. I will update this review after I get a few hundred miles on it and see what the long termDurability of it will look like.
It is guaranteed that the SATISFACTION will be positive. Macally believes in providing high quality solutions for everyday activities. If you don't like their phone and tablet holder, you can return it within 30 days. Their arm is covered by a one year warranty. Quickly raise and lower the table from 33.5" to 47" PORTABLE: The locking casters allow for secure positioning and moving from the gym to the office. Non-SLIP SURFACE: The surface of the desktop is non-slip and has built in slots for tablets and smart phones. VERSATILE: There are holes for cable management in the table. durable: The frame of the RAD Cycle Products is made of steel and will hold up over time.
👤I've looked at the desk for a couple years. It's too expensive. This product is similar to the other one, but with two cupholders and locking wheels. Make sure you put the locking wheels on the ends, not the middle. There is a The anti slip mat is a nice material and the height adjustment buttons work well. The RAD logo is not very good. I removed the stickers from the legs. I'm happy with it. Will report back if there are any issues.
👤It was a much lower price than another product, and the previous reviews looked good. There is a The desk seems to be in good shape. I've only used it a couple of times. I had been using a smaller stand, so that's a plus. Durability is not certain. The threads on one of the wheels were a bit rough, and it didn't seat as well as the others. Here is one major problem. The desktop has built-in tablets and smart phone slots. This is true. The description claims that there are holes for cable management. There is a There are holes in the phone slots, but they are too narrow to allow a simple charging cable through. The holes are 5mm wide. These holes are not very useful. The only way to make them functional is to expand the holes with a Dremel/knife/file. If you have a phone sitting in the designated slot, there is no way to have the phone plugged in and charging without modifying the molded plastic desktop.
👤I wanted a desk in front of the trainer, but I didn't want to pay more than they were asking. I was a bit worried about buying this one, but I ended up giving it a try. That was a mistake. Quality control issues are the same for the original desk and its replacement. One of the buttons on one arm on the desks that I received was lower than it should have been. The first desk was almost impossible to raise and lower, the second desk was slightly better, but still not put together correctly. I decided to cut my losses and return the second one for a refund. I will eventually buy the desk when I can stomach paying that price.
👤My picture is after an hour ride. I am dripping sweat. I can listen to music while pushing work out the door. I have noticed that I type faster and email faster when I am spinning. There is a It is a well-made piece for the price. You can move it around on the wheels. The wheels can be locked in place if you want to use it as a standing desk. Someone is. It is a well-made piece for the price. You can move it around on the wheels. If you want to use it as a standing desk, the wheels can lock in place. I wish I had purchased this sooner because I wanted something like this for a long time.
Go for a natural cycling position and increased stability with the included multifunctional front wheel support, which also serves as a handle to carry the trainer. COMPATIBILITY: The wheel size is 26” or 700c, compatible with road bikes, hybrid and those MTBs. The tire width is from 23C road bike tires to 2.4” MTB tires. ANIT-SKID GRIP DESIGN: The rubber feet on the bottom of the front wheel block could be used to keep the bike in place while you ride. Stable and reliable are the benefits of the front wheel riser block. The design of the skid resistance could keep you safe and your bike stable. The front wheel riser block has three heights, so you can find the most comfortable position for riding. Heights are available in three sizes. You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan.
The front-wheel stand pad and rubber padded feet help reduce the noise of the stand and prevent it from scratching or damaging your flooring. The stand and bike can be stable for safe exercise, sprint, climb, or cruise with confidence if they have a better grip. The heavy-duty aluminum alloy construct is portable. COMPATIBILITY: It is compatible with any frame size bike. Not compatible with 29" bikes. It's great for rear wheel bikes. Wind resistance is a topic. The wind resistance is reliable. It is noisier than a magnet trainer. STABLE & FOLDABLE. The trainer's legs are wide. You can fold it to make it easier to store. The package has trainer, front riser and trainer skewer. You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan.
👤The product is sturdy and easy to use, will recommend it to friends.
👤This was a good purchase. We have moved to a part of the United States that is cold and rainy in the winter and this is enough to not be able to go out on a bike path.
👤I love it! I can ride my bike in the winter, no matter what the weather is like. Assembly is easy in 10 minutes.
👤It was quick and what I needed.
👤It was fun while it was going on, but then it started making noises and seized up in the middle of a workout. Returned to Amazon.
👤It works as expected. Inexpensive. You can ignore the noise by listening to music. I had an issue with the device because it would slide and open too wide, which made it rub against the floor, and because there were rubber stops which would work better on a hard surface, which lowered the tire to a point where it wouldn't rub against the floor. I used zip ties to hold the two rods together so the tire wouldn't fall off the bike.
👤It was loud and wouldn't stop.
👤If you have carpet, beware of traction burns. It works as expected.
👤A rotation of the hanche suite.
Wall bike rack works for most bikes, like road, mountain bike, cyclocross, hybrid, beach cruiser, BMX and kids' bikes. It's ideal for bike storage in home, office, garage, apartment or bicycle shop. There is free up garage space. Are you looking for a way to save floor space in your garage? You've been looking for this one. The wall mount rack is great for use in a garage or apartment. If you want to get organized, hang the bike on the wall to make room for other items. The design makes it easy to take out or hang up your bikes, and it also allows you to hang or detach your bikes in a second. No more mess! It's the same for most bikes. Most bikes, including Mountain Bikes, Road Bikes, Kids Bikes, hybrid Bikes, Cyclocross, and Lady Beach Cruiser Bicycles, are designed to fit this bike hanger. The Max Tire width is 2.32” and the wheels size is from 14 to 29". The Max tire width is 50mm. 25C. The whole rack can hold up to 60 kilogram/135 kilogram bikes in total, and each hanger can hold up to 20 kilo/ 45 kilo bikes. It is easy to install and suitable for both indoor and outdoor use. It's great for garage and shed storage. The wall has 4 screws on it. They recommend that you use studs to securely mount it, otherwise it will be on the wall. Standard wood studs and solid walls are compatible. You can watch the video in their listing. Premium Aluminium alloy is a practical and durable material. The screws and anchors are of the highest quality. The hooks on the rack are covered with rubber, so there's no need for you to worry that the hook will scratch the rim of your bike. Also comes with hooks for hanging your helmets. The holder position can be adjusted. ORDER NOW, WORRY-FREE! They can provide a lifetime warranty because they're so confident in their product quality. It was made in Taiwan.
👤This rack is easy to install, rock-solid, and looks nice and clean enough to make our bikes look a little better. I have attached a couple of pictures of my install. The plan was always to store only 4 bikes after I got the 5 bike model. Our bikes all have wider straight handlebars, and those take quite a bit of horizontal space, so it's a good idea to allow even more width. The garage door is on the right side of my house, so the handlebars can't extend past it. There is a The only change is that the hangers are not permanent. I've got a low one on the garage door end to make hanging/relocating that bike work farther from the potentially closed door, because the high one is open on one side. These are adult-sized bikes. I might consider moving the rack to a back wall in the spring in order to get more space, but it works well. I don't know much about handyman skills, so have some tips for the job. The main metal bar is very sturdy and the rack is light, but a stud- finder was essential. 4 bikes that are not made out of adamantium are heavy. The only practical option in this space was the 3 wall braces I used. It is solid with 4 bikes and braces. There is a The mounting screws are thick. I had to drill full-length pilot holes with a bit and then hand-tighten the screws with a big phillips screwdriver because I couldn't tighten them with a drill. One of the screws did not have the phillips grooves on the tip. I had extras because one of the clamps wasn't being used. I didn't have to worry about my stripping getting in the way of me. I didn't have any on hand already, but I'm sure the hardware store has good replacements. I used a level that reached across two of the braces. Perfect leveling looks nicer and doesn't put more strain on any one brace. You want the braces to be aligned so you can slide the main rack bar into place. I slid the bar into the first two braces after getting one screw in them. I adjusted the position of the third before putting the first screw in, and if I loosen the locking bolts, the bar will slide easily. It doesn't take much to make that much harder, so it's worth being careful with their positioning. There is a The locking nuts on the hangers were annoying to tighten. I gave up before taking my photos, but have since gotten the left one tightened. This helps keep the wheel on the level. The problem is that unlike the locks for the main bar or accessory hooks, these locking nuts are in the interior of the brackets. It uses a small 3mm key. The space is very small. You only get a 70 degree turn when you get the key lined up into the bolt. You have to pull the key arm and reset it after it hits the hook. I slid the bolt into the main bar to minimize the amount of tightening that would need the key. This step would be a lot easier if there was a hex key that could fit into this space. Don't let that affect you. Again, I have minimal home repair skills and experience, and this rack is really simple, and I got it all done in a couple of hours. The stud finder and level were very helpful, and the power drill and large phillips screwdriver were all that was needed to set it all up.
The portable bike exercise stand is portable. They designed the bicycle training rack to be a folding style in order to make it easier to carry. It only takes a minute to set it up and adjust the contact between the wheel and roller. You can put up or unfold the stand to complete the installation and disassemble it. A quick release. The stationary bike trainer's handle can release the bike off the trainer quickly by lifting up, and also can lock the bike to the trainer quickly by pressing down. The indoor bike trainer is very easy to use. 6 speed restriction You can change resistance to comply with the cycling conditions you want with a remote controller. You can ride after quick installation. The 1-2 speed offer less resistance than the 5 or 6 speed. STEADY, STABLE, ANDFIRM: The dual-support structure of the indoor exercise bike trainer is designed. The package includes a wide frame and front wheel riser block to keep it stable. The anti-slip rubber feet fit for the floor in different conditions, preventing movement for stability on any surface. A smooth bike exercise trainer is definitely needed when riding a bike at home. The bike trainer makes your cycling very quiet. If noise is loud, they suggest you use a slick tire because of the materials and tread on the bike tires. The Unisky indoor riding bicycle training stand can fit most road or mountain bikes. If you have a road or mountain bike of normal size, you don't need to buy a new one. Bring your bike to the gym. Take the bike off the trainer and put it at any corner.
👤I decided to try out a trainer since I am not comfortable with road riding and there is no nearby trails. This thing is strong. I was worried it would be wobbly but not at all, and setup was easy. It is a little loud, but I think it is the fault of my bike tire, and I usually wear earbuds on it. Even though this is the first trainer I have ever used, I have nothing to compare it to, and even though I am out of shape, I can still ride just fine. I will be able to take it for a spin outside by next spring.
👤I didn't read the directions and I wasn't paid. It took five minutes. If you need help putting this together, you should wear a helmet.
👤I would buy this again. The reviews were showing that this was great. But then it was! I am very happy with this purchase. I bought this for my road bike, the noise is very minimal and not at all what I was expecting from the other reviews, but again it could be because I have a road bike and not a mountain bike. I took the bike out of the box and locked it in place, there was not much to the setup. The quick release handle is very good. Great product! Highly recommended!
👤This was very stable to use and easy to set. It is loud like a chainsaw but higher pitched.
👤It took 20 minutes to put it together. You could guess what was needed by looking at the pictures. The reviews said this was a noisy machine. It is not that bad compared to a stationary bike. No one complains about the noise. It feels sturdy and fun to use. It works great with a mountain bike. I wish I had bought it earlier.
👤I bought this back at the end of the year. I believe it was delivered quickly and packaged well. There is a The set up was difficult for some people that don't care much for detail. I could not get the back tire of my bike to be centered on the roller of the trainer. Customer service returned my call within a few hours. They thought it was because of my tire width. I have a standard road bike from the early 1990s that has a quick release skewer. The issue is that the red handle on the trainer should come out further into the center when pushed down. I replaced my skewer with the one they supplied, that helped a small amount, the end caps on that skewer come out a bit more than my skewer. There is a The trainer works well. It is not loud. It makes some noise depending on what gear I have my bike in, what resistance I have on the dial, and how far the knob is on the trainer roller. The tires on my bike are very thin. I wear earbuds and it's basically quiet to me. There was a learning curve to using the resistance dial, but once you figured it out, you can find the resistance you want. To get this all to work, you have to tighten the resistance knob on the trainer. The bike on the trainer is stable. The combo works well with the trainer block I bought. I can pedal from time to time, which I do carefully. I have been using this trainer for about an hour a week since January and I am very pleased with it. Customer service gave me a percentage of the price back because of my troubles. Good product, good company for me.
The bike rack is universal and can be used for many kinds of bikes. It is suitable for 650C - 700C Road Bikes. Bikes with tires more than 2.56 inches are excluded. It is strong enough for all types of bicycles. The Look X- Track Series Pedal is compatible with the Shimano SPD SM-SH51. It fits various biking shoes. The cleats only allow release at one direction. Excellent for advanced riders. The cleats are compatible with the SM-SH51. There is no need to adjust pedal tension. Improving your indoor cycle performance is what indoor cycling is about. There are clip-less pedals for indoor cycling. The float is 4 degrees. The chrome Molybdenum steel body is comfortable and durable. 50g. Only a single direction release is allowed. Release your cleats by twisting your heels. There are 2 cleats, 2 cleat washers, and 4 cleat mounting bolts.
👤These cleats were added to the shoes I bought on Amazon that were shipped from China. I am happy that these things are standardized. The screws are long enough to attach and not poke through the sole. If you don't find the screw hole and slip with the screw driver, the cleat can fall to the ground. They worked on my pedals and didn't have to make any adjustments. Will need to watch cracking over time, but I bought these because they seem to be a stronger alloy.
👤I tried to file them to the correct size so that they would fit in the clips. It takes a lot of effort to get them to align, they're a little wide and thick, and they don't like the clips from Shimano. I have nothing else to say.
👤Quality is not good. I have to adjust the screws on the clips. One of them stopped working.
👤I went to a bike shop to get them installed. They had to use their own longer screws to attach the product to my shoes. They have worked well so far. Going on 8 months.
👤It took me a while to figure it out because the instructions weren't very clear, but once I figured it out it was pretty easy.
👤This is a good cleat. One of my cleats is stuck. I can't rotation left or right.
👤These are easy to use and get the job done. Make sure you tighten up when installing. I put mine in my shoes and clip it in.
👤They came up on Amazon and were exactly what I needed. They work for Cyclebar.
Bicycle indoor stand products from Rockbros. In this article about bicycle indoor stand you can see why people choose the product. Saris and Balancefrom are also good brands to look for when you are finding bicycle indoor stand.
Rockbros, Saris and Balancefrom are some of the best brands that chosen by people for bicycle indoor stand. Find the detail in this article. Unisky, Deuter and Rad Cycle Products are also brands that their products are worth to check.