Best Bicycle Indoor Riding

Indoor 6 Dec 2022 10+ Comments Open

1. Unisky Trainer Exercise Training Mountain

Unisky Trainer Exercise Training Mountain

Both the ants and the wireless devices are compatible. The Unisky direct drive bike trainer stand can be used for road or mountain bikes. The bike trainer is compatible with the SHIMANO/SRAM card type. When you use 8/9/10 speed cassette, an adjusting shim is needed to be put on the hub. You can directly fit the flywheel if you use an 11-speed cassette. The cassette is not included. The direct drive fluid bike trainer has both ANT+ and Bluetooth connections. You can keep track of your performance data with ANT+ orBluetooth connected. The power module's button battery is not included in the package. The trainer is for speed bicycles. The service team is here for any questions. The indoor bike trainer with noise reduction wheel makes cycling virtually silent and affords lower friction than other stationary bikes. The trainer does not make noise. The bike stand is made of smooth aluminum and has a direct drive fluid resistance. The exercise bike home trainer has a wide base and low posture. The wide frame and front wheel block keep it stable. The anti-slip rubber feet fit for the floor in different conditions, preventing movement for stability on any surface. Installation of the bicycle trainer, connect to the app, indoor riding can begin within 10 minutes. Take the bike off the trainer and fold it up. It will take no space at your home. You can decorate your home with silver and red.

Brand: Unisky

👤The trainer I bought was to replace a cheap one. I was never able to find a solution to the dilemma of getting enough resistance with acceptable tire degradation and good reliability. There is a This trainer is cheap. It is very sturdy and has good build quality. You have to install the legs, adjust the height, level the unit, and rotation the 4 leg end caps for a perfect leveling. The left side of the axle has an accessory on it. A bike with a front suspension could be an issue if the fork is locked out. There is a It does not come with a cassette, so you need to install your own. The free-hub is a standard type. The installation of the cassette is the most difficult part of the assembly, but it is not that difficult with the right cassette removal tool set. I installed a 7-speed cassette with a 4-mm spacer on my bike. I have not adjusted the belt tensioner mechanism yet. It comes with a ANT+ /Bluetooth accessory, but no battery. I don't use it very much. The power curve would have to be entered somehow, because I assume it will only give speed information. There is a The first thing I noticed is how quiet it is. The combination of high inertia and fluid resistance works well. Changing gears and cadence is the only thing you can do with it because it has a fixed power curve. The resistance housing gets warm in use. It depends on how hard you push this thing. I have been using it on my bike highest gear, and I wish the resistance was a little stronger at low speed. The relatively low power limit of 1128 W / 60 km/hr is not an issue for me because there is way more resistance that I can use when I increase the cadence. There is a This trainer was very good. I have been using this trainer for almost a year now and I use it every weekday. At some point, it developed a really loud annoying noise, like an internal plastic part hitting the housing at each revolution. I split the big resistance/brake housing and was happy to find a very fine design. The big silver housing contains the fluid resistance/brake. It is a sealed unit and there is no rotating shaft. The resistance/brake is driven by magnets that are attached to a wheel in the shaft. The noise was caused by a hard point on the shaft bearing. The plastic wheel was hit and separated from the fan by the combination of strong magnets and small speed drops. A squirt of oil got rid of the hard point. The noise was gone.

2. DARDOS ZenRoad Bike Trainer Stand

DARDOS ZenRoad Bike Trainer Stand

Cassette not included. A safe construction base. The ZenRoad bicycle training stand is very stable to assure your safety even during the most vigorous exercising sessions. The front wheel support base keeps you steady. There is a train in silence. Their bike stationary exercise stand has a noise reduction mechanism, which makes it impossible to make noise. You can train at any time of the day. It's ideal if you live in an apartment. Adaptable resistance: The Zenroad indoor cycling conversion stand has an increase in resistance as you pedal. You get a life-like cycling experience when you pedal fast. ENJOY SMOOTH RIDING: The Zenroad bike roller has a road cycling feel thanks to its fluid mechanism. The trainer reduces the amount of friction on the bike. The Zenroad stationary bike holder is easy to carry. Their bike treadmill is foldable and comes with a carry bag that you can use to store it.

Brand: Zr Zen Road

👤Even for a heavy person, this trainer seems very solid. I have no doubt that it can handle 300 pounds. I like using it and recommend it. There is a There are errors in the listing. The fluid unit and the magnetic unit are both shown in the listing. There is a The instructions seem to be for a different unit. 1. The "fixed latch" needs to be unfastened. There isn't alatch. 2. The section of the frame that is attached to the bike appears to move freely until the back tire touches the pressure regulator. The frame is not locked into place. You would never know that from the instructions. The bike is moved by the pressure regulator. The rider's weight is putting pressure on the tire. 3. The pressure regulator adjustment knob can be used to move the pressure regulator forward or backward. The bike and the frame move with it. This movement changes the angle of the frame, which causes more or less weight on the pressure regulator. The pressure on the pressure regulator increases when the weight of the bike and rider shift from the frame to the pressure regulator. 4. There are no foot pads on this unit. The foot pads are fine, but they are not the same as the ones in the instructions. They are stable and work well. 5. Being a fluid trainer, it doesn't have 6 settings. A magnetic trainer has that feature. There is a I enjoy using it and like it. I would recommend it. It is very easy to setup. Don't rely on the instructions.

👤I haven't had a lot of time with my new ZenRoad trainer so this is an initial impression and review. I will update later as I get more use out of it. There is a The trainer showed up on time. The box was used, but that is likely shipping and not the seller. The product was in great shape and well wrapped. There was no damage. Basic tools for assembly were included in the box. There was no directions. The seller assured me that they were working on updated materials and sent me a basic video to help set up. There is a Solid! The bike is locked in. I was locked into the trainer on the bike. The front wheel riser works. Collapses for easy storage. It would fit any tire. There is a Consistency of resistance is a Cons. This is my first experience with a fluid trainer, but it was not as consistent as the magnetic trainer I have. It is not as smooth and there is a lot more resistance. There is a The contact resistance seems to be provided by the weight of the bike and the rider in this set up. If there is another way to adjust the setup, I don't see it. The tire seemed to slip when lighter force was applied. It is a solid product, and further use may provide a better result, but right now I prefer my older trainer. I will update as needed.

3. DEUTER Trainer Stand Resistance Adjustable

DEUTER Trainer Stand Resistance Adjustable

You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan. Fix the bicycle front fork easily. Most bikes can be adapted with the fully adjusted fork-mount and flexible sled. 9mm quick-release and 12x 100mm, 15x 100mm, and 15x-110mm thru-axles are included. Please be patient when installing the thru-axle, please install the adapter smoothly and accurately. 5 level resistance can be adjusted. You can choose between 5 levels of resistance with the 4pcs of magnets. It's perfect for indoor training or warming up at a race, it provides a realistic resistance and quiet operation, and is close to the natural road cycling experience. Sturdy and safe. DEUTER bike trainers are made of high strength aluminum. Product loading capacity and safety were increased with the solid triangular design. Portable Trainers for Travel The portable bike trainer is easy to install. It can be folded, stored, and carried with the included heavy-duty tote bag, which is easy for transportation and storage. 100% money back guarantee. They know a lot about cycling products. They want you to be happy with your indoor bike trainer. Also, note: If you care about stability, please purchase carefully, there will be a little sway in front during the ride on the trainer.

Brand: Deuter

👤This will help keep me in shape. It works great for the price, but there are some things you should know about it: - Once you get past the magnetic resistance, it's actually pretty smooth sailing, and gives a darn good.

👤I have used this item a number of times, and here is my pro/cons for it. There is a It's easy to set up and put away in a good case. The product feels like quality tools are included. It's hard to pedal on the rollers because it doesn't feel like a trainer. It's a constant uphill ride with a pedal glitch. It's difficult to use the pace/speed adjustments. The pedaling on the rollers is loud.

👤It's portable and will give you a workout. It doesn't feel like a true roller nor does it inspire confidence for harder efforts. I was very excited to receive the rollers. I've had them in my cart for a while. I picked this up for an upcoming trip that's going to require a 2 week quarantine and wanted to still be able to train, ride, and Zwift while I'm out of town. There is a The only thing needed was a 5mm key to attach the legs. Attach your bike, loosen the axle, loosen the nut on the sled, and adjust the sled and lock the nut by unfolding, popping in the front legs. It took me about 5 minutes to setup, with one of the legs being difficult to fit into the opening even with the adjustment screw loosened all the way. There is a Once it's attached, you can start pedaling for the first time. The rollers don't spin freely like on true rollers, and they feel much more like on-wheel magnetic resistance trainers. It's not an issue if you've had experience with magnetic on-wheel trainers, but for someone who's never been on one it can be a challenge. This is due to the fact that on this Deuter, as well as on-wheel magnetic trainers, and even regular rollers there is virtually no build up of angular momentum as you would experience with a direct-drive trainer or riding on the road. I took out all the magnets to see if the roller fluidity would improve. I ran through a quick workout after jumping back on and firing up Zwift to see if I could find any weakness in these rollers. At 50-16 on my road bike in a sprint section, I was able to muster up an average of 416w for 1 min, with a peak of 622w, which was the same as my last test. This. Something. Sways. Too much for me. The center fork support pole still has some play, even though the bike is firmly attached and all the adjustment screws are tightened down. It looked like it was a less easy to use version of the Feedback Sports Omnium trainer. The zero resistance version of the Omnium starts at $380, whereas this was $205 at the time of purchase. I haven't been to the Omnium before but the reviews seem to suggest it is a solid product. There is a The case was larger than expected due to the generous foam padding inside. I don't know if I would trust handing it over as checked luggage without a few additional straps. There is a I would rate this product 3 stars for the design and function, but 1 extra star for its portability factor. I will update this review after I get a few hundred miles on it and see what the long termDurability of it will look like.

4. 1113 RAD Cycle Products Racer

1113 RAD Cycle Products Racer

The Unisky indoor riding bicycle training stand can fit most road or mountain bikes. If you have a road or mountain bike of normal size, you don't need to buy a new one. Bring your bike to the gym. Take the bike off the trainer and put it at any corner. As soon as you start pedaling, the internal magnet creates resistance. Seven levels of resistance are used. The MAG Trainer is extremely light and can be folded down to make it more portable. maximum susceptibility The trainer is one of the strongest on the market. The trainer has extra wide legs and a sturdy frame. EXTRA DURABLE - is made from the finest materials. They back every product they sell with a 100% satisfaction guarantee. It is possible to turn your bike into an indoor exercise bike, with easy set-up and quiet operation.

Brand: Rad Cycle Products

👤I am a casual bike rider who is looking to add some more exercise options to my home since my gym closed. My knowledge of bikes begins with the tires. This was fully assembled. All I had to do was replace my bike's quick release skewer with the one included with the trainer, tighten everything down, and go. Finding my bike pump and fighting off the barn spiders was the hardest part of the process. It makes a loud noise when you get going, but it will be nice to drown them out for a while since I am locked down in my tiny house with my spouse. I find cycling to be a cruel form of torture, so the fact that I can have the bike set up in my home gym and break up the monotony with some other movements is fantastic. If you're closed out of your gym for a while, have a bike that you don't use, or just want to keep up the cycling in bad weather, this is a good idea. I am not an expert at cycling. I'm stuck at home and someone who hates cycling needs something to do. This fits the bill at a great price. If you want to get the digital credit to watch a movie while you're stuck at home, be nice to your local couriers and order this on no-rush shipping.

👤I bought this trainer to help me stay in shape after I broke my hand mountain biking. Its function as a trainer is great if you understand a few of the drawbacks of this particular unit. There is a The magnetic resistance is enough for me to run on a 27.5 tire with a 30 front chainring. When doing intervals, I usually have 13 or 15 teeth depending on how fast I'm spinning, with the magnetic resistance set to the hardest setting. The resistance I experienced on some of the more steep grades on the ride is similar to what I experienced on the two thousand vertical feet ride. This will fit an older mountain bike with a 135mm rear dropout spacing. This won't fit through the axles. I have an older mountain bike that uses the 135mm standard and it worked great for me, but be aware that a newer bike may not fit. There is a This is quite loud when running a hard pack tire with a loud whine from the tire's contact with the resistance roller. If you're using a mountain bike like I am, I would recommend putting on a semi slick or hard pack tire to reduce the noise and also the vibration through the pedals that you will experience. I've been training with headphones on and the noise is acceptable when I'm listening to music or watching a show. I think this is hard to beat for the price and is a good choice for those who are looking for a cheap trainer to use on and off. I use this during the winter when the ground is covered with snow.

5. Thinvik Stabilize Accessories Mountain Exercise

Thinvik Stabilize Accessories Mountain Exercise

You can order now and pay free. They can provide a LIFETIME WARRANTY because they're so confident in their product quality. The tire width can be up to 1.8''. It gives a rise of 1.4". Stable and reliable are the benefits of the front wheel riser block. The design of the skid resistance could keep you safe and your bike stable. It is designed to fit both mountain bike wheels and road bike wheels. There is a molded plastic with no slip feet.

Brand: Thinvik

👤I used this riser block along with a vintage Cycle Ops bicycle Training Stand to maintain a nice level bicycle position. It's important that the bicycle is stable on the stand so you feel more secure. It's great!

👤There are a lot of these on Amazon that all look the same, but this one was the cheapest and works perfectly. It's a hunk of plastic, so there isn't much that can go wrong if it doesn't fall apart, but it fits my bike well, doesn't move around, and seems solid.

👤It met my expectation. My bike needs to be aligned with the trainer. If used with thicker tires, it's a small concern. It doesn't seem to accommodate Mountain Bike styles. It is only for hybrid and road.

👤Solid, simple and stable. Does what it needs to do. It works well with different tire sizes and provides a stable platform. It seems well made, and stands up well to repeated sprints.

👤The ad said it was for mountain bikes. The tire does not fit. Don't buy it if you're going to use it for an adult bike.

👤The bike is raised to be level with the Kickr Core. There were no complaints.

👤The item is good to keep the front from moving too much.

6. Cycleinn Reduction Portable Stationary Resistance

Cycleinn Reduction Portable Stationary Resistance

The Alpcour Indoor Training Block is compatible with most road and mountain bike wheels. The diameters of 650b, 700c, 27.5” and 29” are included. It is ideal for bike enthusiasts that have multiple bikes. The handle at the stationary bike trainer can release the bike off the trainer quickly by lifting up, and also can lock the bike with the trainer by pressing down. Universal quick release fitting is great for indoor cycling training. QUIET. Trainers with fluid resistance wheel are quieter than magnetic trainers. When you listen to music or watch TV, you can keep the volume the same. The materials and tread of bike tires have a lot to do with noise. You should use road bikes. SAFE & STABLE STRUCTURE The bike trainer has a dual-support structure. The wide base and front wheel riser block can be reached. Antislip rubber feets will prevent movement on any surface. The real cycling is depicted. The fluid trainer has a fluid flywheel that spins inside the wheel's liquid to increase resistance as you pedal faster. It can mimic different road environments. The portable bike trainer stand is easy to carry and store. Mountain bikes with a 700c wheel are not suitable for the indoor bike trainer stand. The max load is 265 lbs.

Brand: Cycleinn

👤Assembly went well. It wasn't long enough to replace the rear wheel pin. The threaded end came out of the other end. After you tighten the nut, all the end threads are gone. The nut is not properly seated in the rear wheel because it is not flush inside. The pictures tell the story. If the seller doesn't give a longer piece, I will return it. Not sure where to go next. I bought a new Giant bike a few months ago.

👤The one we received had a slight wobble, but you can adjust the height with the black rubber knobs at the end of each leg. We had to take one off completely to get it to sit upright. It is nice to have a large handle to close the trainer. There is no cutout on the non-drive side to accommodate the quick release arm. Some trainers have a cutout. It's great for those days when you can't get it out, it's raining or it's cold, and you don't feel like riding outside. It is recommended.

👤If you own a bike that was manufactured after 2010, it probably has a 9mm thru axle, which this trainer does not include. You have to buy an additional piece to use it. It's crazy that CycleInn wouldn't include a 9mm option either at purchase or included.

👤I needed to maintain my cycling strength during the winter. I was impressed with the strength of the bike. It works as advertised. I had no trouble setting it up despite the instructions not being as clear as I would have liked. There is a The roller might have to be adjusted a little tighter against the tire than the instructions suggest. The device didn't give me much pedaling resistance until I adjusted the roller tighter against the tire. It worked out fine after that.

👤I am very satisfied with the indoor bike trainer. It took me 20 minutes to unpack and install. I put it next to the wall when I don't use it because it occupies very little space. It is important to me not to disturb my family at night because of its fluid resistance design. If a holder for the separated front wheel block can be added to the trainer, you won't need to look for it while riding the trainer. I will make one myself. It's perfect for my Cannondale wheel.

👤I pedal as fast as I can on my street bike, and it has no resistance.

7. Conquer Trainer Portable Exercise Magnetic

Conquer Trainer Portable Exercise Magnetic

Before wearing, wash separately. Heavy duty construction with extra wide frame folds quickly. Sturdy mounting cups reduce slippage. A single adjustment with progressive magnetic resistance. It is compatible with 26 in. 700c bikes. A bike with a rear quick release wheel is required.

Brand: Conquer

👤I purchased the Conquer Indoor Bike Trainer Portable Exerciser so I could use it to ride my mountain bike indoors on rainy days and when I can't ride outdoors. I opened the package after it arrived and found everything in the box and the front wheel riser block. I put the bike in and adjusted it so that it would ride straight on the roller, tightened the mounting cups and took off. I stayed in the same spot and didn't go anywhere. You get the meaning. There is a The portable stand is wider than other stands which helps balance. I expected some noise from my tires but it's manageable. The front riser stand helps keep the bike level and straight. I give it a 5 star rating. I am satisfied with the product and would purchase it again. It helps to have a 61 year old body with an 18 year old mind and this helps keep me in good shape when it's raining or not. It is easy to fold up when not in use so you can ride on nice days or easy to unfold, adjust the tension and haul butt without going anywhere, and it is also helpful to maintain a healthy lifestyle. It's portable so you can take it with you if you go on vacation. A winner all the way around.

👤There are a few things you need to know. I am not a cyclist. I don't own a bike. I am not a good athlete. Let's go on, shall we? I wanted to use the discount store bike to lose weight and tone up in the new year, so I put it in my garage. I found a trainer on Amazon that was inexpensive. The reviews were good. The price was reasonable. Shipping would be fast. There is a When the trainer arrived, well packaged and assembled, I pulled it out of the box, read the directions, and figured I would send it back because my bike didn't have a quick release skewer. kewers are for grilling, are they not? There is a I did some research. I found a trusted website that explained that the rear wheels of the trainer did not need to be taken apart. The cups on the stand hold the wheel in place. Applause! I adjusted my bike seat, put the stand on my bike, and threw an extra inch of board under the stabilizer. I'm happy biking in my garage.

8. Alpcour Front Trainer Anti Skid Design

Alpcour Front Trainer Anti Skid Design

You can order now and pay free. They can provide a 5-year warranty on their product. It was made in Taiwan. Alpcour always puts emphasis on making durable and high quality products and only uses high quality materials. Alpcour Indoor Training Block is manufactured using premium quality plastic molded to a well developed design that ensures stability and durability of the product through continuous usage. It's not a good idea to use it if you're worried that it might break and cause unforeseen scenarios. Alpcour Indoor Training Block was designed to partially lift the front wheel of the bike to mimic normal riding conditions. This design allows for a natural riding position which is ideal for training. No worries, it might make you uncomfortable. It's perfect for indoor trainings. The Alpcour Indoor Training Block is very sturdy and has a good design. The user is able to focus and exert more energy during training. The design makes the training more efficient. You can train hard and reach your peak state indoors. Alpcour Indoor Training Block has an anti-skid pad on the bottom of the front wheel block to make it more secure. Even with high intensity training, it keeps the training block in place. It helps in keeping your floor free of scratches. The Alpcour Indoor Training Block is compatible with most road and mountain bike wheels. The diameters of 650b, 700c, 27.5” and 29” are included. It is ideal for bike enthusiasts that have multiple bikes.

Brand: Alpcour

👤The wheel block is not for mountain bikes. My mtn bike has tires that don't fit in this. I ordered it because the product information said it would fit mtn bike tires/wheels, and no one had left a review with this specific information. If you have the same as me, I wouldn't recommend this. It's better suited for gravel or road tires.

👤This option is great if you don't have enough space for a rack.

👤I thought it would work. I'm happy I bought it.

👤Does what it says it will do and a great price.

👤It was easy to use. The front bike tire is in place.

👤This product is not very good. I only weigh 130 lbs and this broke after 10 uses.

👤It was used for trainer rides.

9. KOM Cycling Media Display Displaying

KOM Cycling Media Display Displaying

You can adjust the pedal resistance settings with the tension knob. The game changed. For serious cyclists looking for an indoor training solution during cold winters or for a way to warm up before a race, the KOM Cycling Indoor Media Display bike desk is a must have. You can easily reach your phone or water bottle with the two conveniently placed holding water bottle slots. There is an optimal solution. The KOM Cycling Indoor Media Display bike desk workstation makes indoor cycling easier. Place your laptop or tablets securely so you can start ascending. Use the bike trainer desk to maximize productivity while cycling or even as a standing desk to give your body a break from sitting all day. The large surface area will give you plenty of room for all of your devices, as well as a water bottle or cup of coffee. You can switch between using the desk as a freestanding desk or a trainer in just seconds. Anti-SLIP and adjusted design. The non-slip surface of the KOM Cycling Media display protects your devices from slipping. It is the perfect add on for an indoor spin bike and is perfect for indoor training. Light weight and portable. The device holder on this bike trainer is secure. It features an aluminum tripod base and plastic desktop that are lightweight and durable.

Brand: Kom Cycling

👤There are some issues here. The tripod base makes it difficult to get the desk close enough to the rider to use the front wheel. The setup is wobbly. Sometimes the water bottles bounce out of the holders, making it more useful to just keep them in the cages on the bike. If you use a fan while riding this setup, it will block most of the fan air in front of the cockpit. This is a poor solution when you can spend twice as much for a great solution.

👤I replaced the music stand I was using with this one to make sure it worked again. It's not the best platform, but it's enough to hold my iPad, phone, and snack bar. I keep my bottles in the bike cages, so I don't use the bottle holders. Things stay put on the tacky surface. If you like your phone to be almost vertical, the slot along the front is for you. It's a great value for the money and it's well-made.

👤It was purchased for use with my trainer. I used to have a desk from one of the popular indoor trainer companies, but it was too large for our apartment. There is a This one is easy to setup in a few minutes with the supplied allen key and hand adjustments. There is a There is enough room for my laptop, remote controls, drink and cellphone on the top. There is a The top deck can be positioned in two different ways, one at the front and the other at the back, to give more clearance for the legs and wheel. It can be stored in a closet within a minute by folding the legs and removing the top deck by hand. The desk is rolling, but this is much happier. The music stand I tried was not as strong as the one I tried now.

👤I bought this desk for our second KICKR setup. The first set up has a desk. I think that the desk is good for most users and at $200 less than the other desk, it is a good deal. It is very easy to set up and has a tripod. There are bottle holders missing from the desk surface. There is a This company is great to deal with. The desk is a brand new product and is just shipping, so I received emails letting me know of the availability. When the shipment was a few days behind schedule, they sent two water bottles as a gift. I am a loyal customer of this company.

10. LITENG Bicycle Interior Coach Blocks

LITENG Bicycle Interior Coach Blocks

This is a notice. Please tell them if you have any questions about this front wheel support. They will try to help you. A non-slip design has three rubber feet caught in the front wheel to ensure maximum security. Each side of the piece has an arrow three height difference. The goal was to build the most functional front wheel block to help you maximize your indoor training. The LirTeng Cycling indoor trainer block is the best on the market because of its 700x23c to 29.3 tires, three heights to fit every trainer, and a webbed grip bottom.

Brand: Liteng

11. Alpcour Bike Trainer Stand Quick Release

Alpcour Bike Trainer Stand Quick Release

A bike with a rear quick release wheel is required. Make the switch to working! Mag bike stand converts any mountain or road bike into a stable, smooth-riding indoor stationary bicycle for all-season training, conditioning. The Super Quiet Magnetic Technology creates drag against tire to replicate a real cycling experience. 6 levels of fixed resistance, a bar mounted cable controller and extra wide base and low stance ensure perfect balance at every setting. The stand is made of heavy duty steel and has a front wheel riser block and anti-slip rubber pads. The foldable framework is easy to use. The portable stand is lightweight and portable so you can pack and go, it comes with a sturdy bag for easy carrying and storage.

Brand: Alpcour

👤The bike trainer is a game-changer for me. I can't ride outside if the air quality is bad. I have been able to be active in a new way. There is a My beach cruiser fits just fine, as can be seen in the pictures. The unit is very sturdy and it is easy to adjust the wheel gizmo that provides resistance and stability. I have not had any issues with the cord being in the way of pedaling because it is long. Storage. It folds up and has a good bag to hold it. I am not an elite athlete, but from the standpoint of a regular person, this has been really easy to use and does what it is supposed to do.

👤Training in the winter is a must before the spring. The Alpcour is a brand I have owned in the past. The magnetic flywheel with the 6 position resistance module makes a perfect match for gear shifting and resistance settings for a solid work out. The basic engineering design of my brand was flawed. The Alpcour is easy to set up and very smooth. I can't say enough good things about this product. You can't go wrong for $100.00. I'd put the Alpcour against a trainer who paid $300.00. Excellent value, excellent trainer, and of high quality.

👤I'm slightly indifferent with this... I don't have a road bike, but I have a mountain bike, so I know my tires are not as big as a road bike. It is so loud that it is shaking my house even if I have it on the lightest setting. The cable for the gear set up is a little awkward, so you have to keep it out of the way of the pedals in order to keep it awkward. It serves its purpose, that is for sure, but the minus 1 star is solely for the fact that it says it is compatible with both types of bikes, and specifically advertises for noise reduction, but it is not the case with a mountain bike. If you choose to get a spare tire for your bike, be aware of the loud noise and the fact that you may be using it for a mountain bike.

👤I will be honest. I would like to work with this trainer. I am having trouble doing that. There are a lot of things that I have problems with. 1. The quietness that was marketed is not all that quiet. It is loud for me. It makes training harder to focus on. I own a road bike. 2. I didn't expect this much wear on my tires in 1-2 days of receiving the product. If this is the case, I am worried my tires won't last me long. I have some difficulty with the resistance. This doesn't really give me a simulation of a real life resistance or incline I would feel outside, maybe because I'm more used to the outdoors resistance. I am not saying I am pro or anything like that. It is hard for me to train indoors because of these reasons. That is just me.


What is the best product for bicycle indoor riding?

Bicycle indoor riding products from Unisky. In this article about bicycle indoor riding you can see why people choose the product. Zr Zen Road and Deuter are also good brands to look for when you are finding bicycle indoor riding.

What are the best brands for bicycle indoor riding?

Unisky, Zr Zen Road and Deuter are some of the best brands that chosen by people for bicycle indoor riding. Find the detail in this article. Rad Cycle Products, Thinvik and Cycleinn are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to