easy to install, Versatility, and rotation. The mount brackets for the mountain bike light can be fixed to the handlebars. It's easy to install and you don't have to use tools. You can adjust it to your liking. The emergency flashlight can be put in the car, basement, attic and emergency kit. It can be used during cycling, hiking, camping, night photography, dog walking and power outages. The 1000 watt output is in a lightweight package. Easy to install, ideal for helmet or handlebar. SafePulse mode has 500 light bulbs. There are four modes with up to 12 hour run time. The side lights are powerful. The ability to run and charge on portable power is available. The battery status indicator is accurate.
👤I mount this light on my helmet for night riding. It's fastened tight and securely, has full adjustability up/down/right to suit your position, and casts as much light as you need. I also use a road bike's handlebars as a display point for my headlights. The Vis Pro has the ability to aim a blinding beam at the cars not paying attention to the intersection, but this provides twice the safety. I usually do 2 hour rides at night but never have run out of battery. Totally satisfied with the purchase.
👤It's easy to use and bright. It comes with a lot of mounting options and accessories. There is a The reason I returned the light was because I wanted a spotlight on my helmet. This works better as a light source. If you don't mind the shorter run time, this would work well for a handlebar mounted light.
👤Excellent mounting system, including a helmet mount. The light is amazing for the price.
👤I like the side light feature. I am not sure if it is 1000 lumens. The on/off button is hard to press, especially with gloves on, and it doesn't seem to be any brighter than my 600-lumen light. It is mounted with my other light and I was a little disappointed with the price. I wouldn't buy again for the price.
👤This was a perfect light for my husband's mountain bike as the trails are dark so early in the year. My husband found a tail light from a different maker, but I wish they would have offered it.
👤It was easy to use. It's easy to install. The trail is lit up by the brightness.
👤The light beam is wide. It took a while to dismount. There is a The design is simple and slick.
The body is super light. Use Silicone strap, flash bike, bike speaker mount,bicycle flashlight mount,bike light mount,bike flashlight mount,speaker holder, flash mount, flash light bike mount, flashlight bike mount,rubber tie down straps,mtb for wide use. Use as gopro mount light,bycicles holder, flashlight holder for bicycle,bicycle light mounting bracket,bike flashlight holder handlebar, flashlight mount, it is easy to install. It's easy to use a flashlight. There is no more fiddling with screws and brackets. It is kept stationary. It's easy to mount a light. Store your day pack when not needed. When not needed, keep your bars uncluttered with a bulky mount. The bicycle twine tie is made of bicycle twine. The ones that screw tight break easy are a better option. They have everything from speakers to lights. Great investment. It holds the lights securely and only your flash light serves as a guide when driving on the dark night. They can be used to attach objects to your bike. STURDY & LIGHTWEIGHT are made of high quality Silicone and have no strange smell or taste. This is a short edition, it has a length of 14.2 cm and a high elastic that can be stretched to 30 cm. You can hang stuff on your bike. No more special adapter is needed for your equipment from now on, it can be tied with a Silicone strap, and there is a Lifetime warranty.
👤The straps are too rubbery and let the bike light bounce all over. There is a The product took 3 months to arrive and turned out to be rubber bands. There is a It's too thin, weak and stretchy to be useful.
👤It's working out great. I noticed a nick on one of the lighter colored bands which looked like it could break at any time, even though I was able to use a small flashlight. It could have sent my flashlight flying if it snapped on the road. I put one on top of the handlebars and the other below it. It's good that it came with a lot of extra and the setup seems to be holding up well.
👤I've never used a rubber or velcro flashlight mount that is as grippier as Silicone. These are small, easy to carry, and will keep a small flashlight on the handlebars of a mountain bike in situations where rubber and velcro products move around and eventually point downward. I will definitely buy more in the future.
👤This seems like a great way to attach something to a bar. I attach my mini speaker to my golf cart, and it's great. I wanted to attach an umbrella to my golf cart, but I would probably need two to do it. It seems like a lot of work to slide an umbrella through one or two of these, so you might want to look for something that can detach. This is great for small items.
👤I bought a light for my bike. I didn't want to have to reuse my break cables, so I couldn't use the mount that came with the bike. This was a perfect solution. I ride a bike. I am not sure if I would recommend mountain biking.
👤I just got them and tried fitting my flash light on my bike, and they seem stronger than you would think, as long as you take care of them, they shouldn't break. I feel confident that when I do any tricks they will hold my flash light and I can just move it back in place, even if the flash light is jigle and change angle. You can always buy more of them because they are cheap.
👤You have to mount a huge flashlight for it to be remotely snug. The money was wasted.
👤These are what they say they do. They can hold a flashlight to your bike. It's also useful for speed and cadence sensors. The sensors I used were expensive but came with disposable zip ties. The extra flashlight bands are great.
Through rotating the ball head, make the device in the right direction, Multi-angle rotation, easy adjustment for optimal viewing. The HSU motorcycle camera holder is made from high rigidity aluminum alloy. It has a slip resistant function and an anti-skid pad on the inside of the clamp, which protects your poles from scratching. Rustproof and waterproof. It is caused by corrosive elements. The gopro bicycle handlebar mount allows for a 180 degree rotation for your shooting from different angles. The Handlebar Mount is easy to install on any round or semi-round tube. It's suitable for action sports such as biking, mountain biking, and motocross. The net weight was 3.2 ounces. For all of the GoPro cameras, it's compatible. Brave 7/6/4 Campark Dragon Touch REMALI 4K and other cameras.
👤This is what it serves. If you want it in between clicks to better center it, then it is not an option. The people that are saying it doesn't hold the camera up and falls down probably have the screw in the wrong place. This thing is difficult to screw on-take with a small Allen wrench. If you want to move the mount to different bikes then it's not good. We got two and that solved the issue. It does a good job for a good price.
👤The same as every other bicycle accessory, the handlebar part is secured with head screws. There is a part that pans the camera withtents every 15o of rotation. That part works as well. The screw that goes through the two folding flaps that hang off the bottom of the GoPro 10 is something that I don't like. I have to grab the camera and pull it level again after a while because road vibration causes the camera to tip forward. If there is not much vibration, the camera will eventually dip forward because of the road surface.
👤This helped me mount my camera. It's so versatile and sturdy. It is stiff but it is smooth. It will not shift involuntarily. The build all aluminum and how the threads are engraved into the product is what I love about it. I bought a grommet as my bar was skinnier than I thought. Cut it and place it above and below the clamps to make sure it is secured. Don't sleep on this one.
👤I bought the aluminum mount after the plastic one broke. The metal version slipped on my handlebars stem, and the camera mount was not stable even after I tightened it. I got a cheaper plastic mount.
👤I found an old GoPro in my closet, but it only had a helmet mount. I bought this for mounting because I was afraid it would fall off the mountain bike trail. It was very sturdy on its first ride. The product is not to blame for the fact that you can't turn the camera while riding. Next, looking for a helmet mount.
👤I use the mount for mountain biking, and it works great. I set it and it was still perfect. I'm guessing this only happens when you mountain bike is that you can hear a sound during the recordings. I think it came from the mount because it is spring loaded. I put a piece of rubber around the seam.
A high-intensity cycling headlight is visible in the daytime from more than 1 mile away. For up to 1.5 hours, you can Projects a steady blast of 800 lumens. The battery life can be extended by automatically adjusting to ambient light conditions. Works with compatible Edge computers to turn lights on or off. Light modes include high, medium, low, night flash and day flash.
👤I bought this light because of its integration into the computer. I like the form factor, size and weight of a stand alone light. The features are promising and the light is bright. At launch time, the products are never ready for prime time. This one was no exception. The light network that was formed between the head unit and the light was disconnected twice during a 50 mile ride. The last time it was disconnected, it did not return to normal. I think that an update will be issued to make this connection more reliable in the future. Who knows? For now, I will give it 4 stars. Is it wrong to expect something to work out of the box? There is an update. The problem was fixed through an update. They always do. The network would be disconnected if you had both the light and the radar on at the same time, because of the conflict between the light and the radar. They gave me a free update to the light software, which was a updatingusb connector. I didn't need it. The update was done on the Edge computer. Why wasn't this conflict caught before the launch date? The light was designed and advertised to work in a light network. Shouldn't the basic incompatibly issue have been discovered before the product was launched? Is it too much to ask? I am not changing my rating. Every time I buy a product from you, I get this. Major issues like this are not what I expect. Get it together...
👤The light is bright. It doesn't last into the ride. I planned a route of 62.3 miles which took 4.5 hours to complete. The ride's light battery died after 2 hours. There is a Since the head unit had a 62 mile ride programmed, the light should have been dimmer. The headlights kept changing to the brighter setting. There is a I tried to make the light last longer by changing it to a dimmer setting. Each time, the head unit was changed back to the maximum setting. There is a The light is nearly useless for long rides. It would work well for my shorter rides in the morning, but $100 is a hefty price for a headlight that only works for short rides. There is a The light sends pop-up notifications when the battery is low, which is annoying. It should have adjusted itself to the "ride profile" and conserve the battery on its own. It complains when it runs out of battery life on rides you told it you were going to do, and resists the users attempts to manage battery life. There is a The tail-light is a life saver and I thought it would complete the picture. Don't let this junk get you down. There is a The battery life may be more sensible if an update is released. It gets 1 star for ignoring user input. It should stay on the lower setting if I put it there.
The action camera mount is perfect for recording your riding adventures. The camera mount on the Hero allows you to film hands-free so you can still enjoy the ride. For the perfect fit, the dial fit is adjusted. 15 deliberately placed air vents provide optimal airflow to keep your head cool on hot summer rides. The U.S.CPSC has a safety standard for bicycle helmets.
👤It was very comfortable and well built, compared to my five others. It is a definite recommendation to buy. It works with gopro 8.
👤The helmet Gopro mount is a good one, but the main problem is that people see it right away and then they start recording. I decided it was not worth the hassle. So. I only use my chest mount for my camera now. I don't have any issues on the trails. The chest mount works better for me because people don't notice it.
👤I have worn this helmet on my bike and seadoo. It looks and feels good, and all the slots allow air to flow through. My head does not feel the heat of the sun on a sunny day because of the styrofoam acting as an insulation.
👤I was looking for something that I could mount my go pro or flash light on, and this one works great, it's cheap, and they look the same. This product is very good.
👤It is difficult to find the perfect helmet online because you don't know what fits your head, and I tried it in Walmart and it fit my hair perfect.
👤You get what you pay for. The go pro handle is helpful and the helmet is cool. It doesn't fit that well. There is a lot of room between the helmet and head for the helmet to move. I'm not comfortable with it. I am a medium.
👤The price is a good deal. The camera was held well. The visor should have been removed.
👤This is an excellent helmet for the price. It was very easy to fit, I would guess an adult head. I will use the go pro mount in the future. This is a good buy for the price.
👤It was difficult to get a mount on my helmet that was stable. The mount is built in hard plastic. The more stable the platform, the better the videos will be.
This bike mount is compatible with a lot of gps computers, including the Edge 530 830 1000 1030 130 Plus. It's used in road bikes with 25.4mm and 31.8mm handlebars, so you can easily view performance data on your gps computer. It's compatible with the Gopro interface Sports Action Camera. The construction was created from injection molded co-polymer. It's strong enough to keep your electronics on your bicycle, even if it's bumpy. TUSITA Cycling Mounts are safe and secure, so you can focus on your goals, whether that be having fun or going fast, and they are confident thatUpgrading to a TUSITA Cycling Mount will give you piece of mind knowing you have chosen the best way to securely lock and It's quick and easy to install. It's very easy to install and disassemble from a bicycle handlebar with the convenient installation kit.
👤The TUSITA mount is very reliable and works with the 530. I have already used it for a couple of weeks for a total of 240 miles, including a 100K with very bumpy terrain, and it has met my expectations. I mounted my two electronics at the same time during my ride. I hope this helps... I will attempt the configuration of the device on my next trial. I will be using a dive-light with the mount. If there are any problems, I will update... a couple more things, choose the correct rubber ring for your handlebars, and use a longer screw. It's a suggestion that you always secure your devices to the handlebars using a tether. Stay safe!
👤I bought the Towild and Tusita out front mounts to put on two different bikes. The Tusita puts the mount to the right while the Towild puts it to the left. I put them on one bike. The one on the left is the Tusita. The Tusita will fit in front of the stem. It's not long enough to support my phone in front of the stem. If I really wanted to use the garmin mount on the up front mounts, I could relocate the phone case. The Tusita is currently $2 cheaper than the Towild, so I would probably go with the Tusita since it has more options where it can be mounted.
👤This will be a short review. The original mount for a Garmin is over $30, which is insane for a piece of plastic. When I ordered it, I noticed it was a long time, but as soon as I held it in my hand, it felt small, and I immediately fit it to my bike. The mount is sturdy and substantial. I'm glad that I don't have to worry about this thing breaking down because it's definitely a mount for a more robust computer and overkill for my Edge 130. The mount is so solid that the tether for my device feels redundant. You will love it if you give it a try.
👤I have a gravel bike that I don't ride as often as my road bike. I was going to just mount my 830 to the stem, but I'm used to having it out front. I have a Tusita Silicone protective case and it has been great for over a year, so I decided to get this. It was very easy to install and it came with an accessory for other devices. I didn't feel like the lock was locked all that hard. It locks with authority on the mount. This does not. After putting the lanyard on that I had never bothered to install before, I've put this through 350+ miles of bumpy gravel roads and some single track that I have no business bringing a gravel bike down. I would buy this again.
Buy with confidence. Ascher is dedicated to making sure you are completely satisfied with the products they provide. They will solve the problem for you as soon as possible if you contact them. The bicycle light is very bright, come with 3T6 LED lights cover a wide range and long-distance Experience, allowing you to ride at night to see wider and further areas, and equipped with bicycle taillights to make your ride safer. The bike light can be used to charge the phone or computer. The battery life can be extended with temperature control and protection IC. The Power indicator will turn red if power is less than 20%. STAINLESS STEEL CLIP. The bike headlight can be fixed on the handlebars without tools. The clip is easy to carry. The taillight has a Silicone mounting strap. It is possible to switch according to your needs. The flashlight function can be used in a variety of scenes, such as cycling, camping, night fishing, and walking. A bike headlight, a bike taillight, an instruction manual, a bracket, and a non-slip mat are included in the price. If you need help, they will be there for you 7 days a week.
👤Talked to Amazon, not 3000 Lumen, was removed due to fraud. There is a listing.
👤The good... The light and the light's function is great. There are five different modes of operation for the light and they are high, medium, low, strobe and "S.O.S." There is a I want to let you know that my wife and I are in our forties and not jumping off curbs or riding off road or sidewalk. It was the wrong thing to do. The mount attached to the handlebars is adequate but the part that holds the light to the mount is terrible. My wife and I both have this light but in riding around the neighborhood for exercise during the Pandemic they have slipped out of the mount and hit the asphalt/concrete and the light aluminum housing took significant damage. I have to say that the light continues to work and that it did not damage the light lens.
👤This is a nice light. It is very bright and durable. I know it's durable because it has fallen off of the mount 10 times and survived every time. I've tried mounting it both ways. It's tight when you first use it and loosens over time. It falls off when you are on a bumpy road. I have tried many solutions but have not found a good one. I'm using a zip tie that works great but I have to leave it on the bike or cut it to charge the light.
👤I got a light meter from work and measured the light from 3 feet away because I was skeptical about how bright it was. 3000 lux is what it produces. When pressing the on/off button, it cycles through several annoying modes before turning it off, but holding the button for 3 seconds turns it off.
👤The levels and patterns on this light make it impossible to not be seen. I like that there is a pattern of slow flashing but still quick enough to catch someone's attention. I wish the mounting system had an option to be permanent. Like using screws without hand grips to prevent someone from walking by, and then walking off with it. It is great so far.
👤This bike light is very bright. It's great for dark roads. It illuminates your peripheral area if anything comes out of the bush or tree line, as you can see several feet ahead, while riding in almost pitch blackness. It's great for trails or wherever you're riding, but it's dangerous where dips, holes, slopes or rocks are. The only problem I had was after a rough ride, the brackets came loose, causing the light to drift down. I had to tighten it a couple of times. I added a washer after replacing the screw. The problem has been solved so far. This light is very good. It's worth it.
👤I bought this light for night rides on city paved trails to replace a much more expensive light that I bought 5 years ago. I have had this for a few months and it has gotten a workout with the earlier nightfall. The bad: * all in one unit. I have had an external battery for the last few lights. This is a unit. If you add the light to the previous weight, it's a little heavier than my last battery. The battery life is really good. My old light, with an external and new battery was getting 2 on low or medium, and I rarely go above "medium" and often stay at "low", which lasts 3-6 hours before I go in the red. "high" chews up the battery a bit more, but it's better than my old light, which was very bright with a wide beam. I can see a wide swath of the trail ahead of me even though most of the light is directed straight ahead. Some people complain that it isn't 3k lumen. This is brighter than my previous light which was rated at 2500, but I don't have the tools to measure it. The back light is cool. I bought another light at the same time that I had a digital power readout. When it hits 25% power, it goes from green to red. I've read that the mount isn't bad. It's... Okay. You may need to use the rubber spacers that are included with the light. They help if you have a more narrow handle bar. I might get a little movement if I hit a nasty bump, but it's never been a big problem. The good: * can't think of anything. Really like the lights.
The value is great. The mount straps fit around many seat posts, handlebars, seat risers, backpacks, helmets and stretch to keep lights secure and firm, will not be shaken off on any curved road. The bike light set can be used as an emergency flashlight and can be used for any outdoor activity. It's great for cycling at night in places where visibility and safety are important. It is designed for high-speed bicycles. It is an essential tool to accompany your experience of speed and passion. The road bike light set is one of the most versatile and bright in its category, with a 2760 watt front light that can light up your entire road or path ahead, and beam up an extensive range of your surroundings. The front bike light with a mounting bracket is sturdy enough to hold the light to accompany you during your rough rides. The bike lights are easy to remove with the tool-less mounting system. The bike light is powered by 9600mAh batteries, it can last up to 42 hours, and the bike headlight can take 2 hours to fully charge. It has a port for charging your electronic devices. More than a bike light. 1.5m impact-resistant and water-resistant. The bike headlight can be used as an emergency flashlight, portable design, keep it inside your car, basement, attic, and emergency kit. It can be used when you are hiking, camping, walking your dog, cycling, changing a tire, and more. The mtb light is made from military-grade materials and is designed to endure tough handling and beatings. 24 month warranty If you have a problem, please reach out to them, they will address it promptly. Start your next adventure with them. Order now with no risk.
👤The bike headlight does make you visible, but it is not intended to make you visible. This will make the road visible. No kidding. It's like a car light. Be aware of theANGLE. It's time to aim it down. It's a bad idea to be on a bike if you can't seecoming drivers. If you don't need that much light, it has two weaker settings. There is a I think the fit provided will fit anything on two wheels. There are many different configurations that are possible. There is a The headlights and rear light are nice, but they have different charging cords. The taillight is a traditional miniusb, but the headlight is a little quirky, so read the following carefully. There is a The charging cord for the light has a regular plug on one end and a regular plug on the other. The light won't charge with a charging cord or a charger. If you have a newer phone, the rapid-charging cord will fit the light, but it won't charge the light. If you use the cord provided, you can use the same power port you use for the taillight. If you need to bring extra power with you, you can use a power brick that only has a traditionalUSB port, not a C port. There is a The headlight has two ports. It also has a regular port. It's not for charging the light, but for using it as a power brick to charge or run something else, like your phone. How cool is that? Bring your charging cord with you on the road. If you reverse it, the regularusb end will go to the light and theusb C end will go to your phone, and you will have another hour of You-tube.
👤I have had a lot of different bike lights. I live in Los Angeles in a part of the city where the life expectancy is lower than average. The rechargable lights in this SET are easy to detach from. The seller has done a good job of laying out all the specifications and reasons why good bike lights are important, so I won't be redundant and repeat it if you haven't seen it. There is a This is actually 2760 lumens. Most of the tactical lights on Amazon are not worth the money. Not a bad boy. The red back light has been one of my favorites for a long time. It charges quickly and holds a charge for a long time. Around 45 minutes before they start getting dim. They look good on both retro and modern bikes. I have used the white version of the red tail light as a headlight for a long time. It has been adequate. No complaints at all... It would be nice to see more of the road and have more visibility for the things that are on it. Less is not more when it comes to visibility and bicycles at night. There is a The bicycle headlight is the best I've ever owned. It's a good tactical work light and I just point at the ceiling while resting on the top of a door frame. It lights the whole thing with a blanket of light from the ceiling. For a long time. There is a 48 hours are claimed on the project page. When I got home to turn it on, I propped it up because the breaker in my bedroom flipped, and I woke up at 6 in the morning. It's a tank that feels solid and well-made. It's an awesome light and can be used as a power bank to charge your phone. The seller extended the warranty for 24 months. Highly recommended! Holly.
The U.S.CPSC has a safety standard for bicycle helmets. The lumina adetper is made by the ABS. The mount is easy to mount. And also very strong. There is a 5 star guarantee. There is a 24 month warranty and friendly customer service.
👤It works. 5 months with solid grip and 5 times mount and remove light daily. I replaced it. Plastic fatigue/aged was the result of every time I hit a hard bump light. The cost of product life is not worth it's own cost. The most durable screw-type mount is the Niterider, but it's not supplied with light anymore. The type moves too much. Both use large amounts of handlebar space, but I prefer the k-edge aluminum mount. It was annoying to remove the mount. The screws are cutting into the light. The best gopro adapter was made by Womo designs. The stock LUMINA slider was used. It's an easy replacement, but it looks awkward. Still have and use.
👤A cheap and easy way to add lights to helmets. The mount is strong. This mount hasn't cracked despite hitting tree branches at full speed.
👤The Lunina 350 is perfect for this adapter. The dovetails match up well. A good fit. There is a The cleats are too thin to keep the light from sliding off after jumping off curbs. Your headlight will fall off if you have too much vibration. The rubber band and 5 months of daily rides solved the problem of the NR Lumina falling off. I used a tooth washer lock nut and a machine screw to attach the aluminum post to my stem's cap. Not sure about the fitUP.
👤The price is very secure and slides on and off easily. It was used with my older MiNewt 250 and Best Tek Out-Front mount. The MiNewt handlebar mount was replaced and therefore more space was freed up on the handlebars.
👤I used it under the mount. The plastic on this feels cheap. My cables went across the light mounts release tab, and kept downward pressure on it, as the light slid in. I was worried that the light would come off on its own. I'm concerned about the long term life of the plastic on the mount. This is a great match for the light and out-front mount.
👤The material for the hinge is too thin and doesn't provide enough interference fit. The light wouldn't hold its position even when the bolt was tightened as tight as I could. I had to add a few white reinforcement stickers that are used with 3 hole punched papers, and after adding about 10 of these in total on all sides, there was enough friction where the light will hold position. I haven't used it yet, but I hope it works.
Light modes include high, medium, low, night flash and day flash. The lock mode feature keeps the headlight powered off during transport. Simply hold the power button down for 10 seconds and the light will be unlocked. The LUMINA 900 Bose is locked at the factory. Lock before use. Before use, unplug from the charging device. There is a daytime flash for increased visibility. Cars and motorcycles have daytime running lights. They think cyclists should as well. The power button has a low battery indicator. The blue color indicates a good battery level. The battery level is less than 20% remaining. Cyclists with the most durable, reliable and best performing lights in the market can rely on the rugged fiberglass design with reinforced nylon housing. Quality lighting systems are the only ones you should rely on. A custom aluminum heatsink is used to keep the self-contained Li-Ion battery and other inside circuitry at an optimal operating temperature. The profile has sweeping heatsink fins. It is easy to charge the Reliable LI-IONusb Rechargeable bike light, which eliminates the need to replace batteries on a regular basis. Can be charged from a powered up computer, device or AC wall adapter.
👤I have an older model that works well. I bought the 1100 and 900 boost models at the same time because I needed another. I need to return one but this gave me a chance to compare them. There is a They are not great for mixing in a photo light-painting application. The 1100 is a little warmer than the 900. This is not important for biking. The 900 boost has a diffuser built in, which makes the beam wider and more uniform. This is an upgrade over the older model where I wanted a wider beam. I am returning the 1100 and keeping the 900 boost.
👤I bought the Lumina 900 for a friend as a Christmas gift. Both units have the same functions and drain time. The size and light output of lumina's are hard to beat. I've ridden through rain storms on dirt with these. The best time to buy NiteRider products is at the end of the year. These are usually discounted by 50%.
👤The battery won't charge, the light won't turn on, and the flashing red light was a nightmare. A dead battery or a bad circuit board is what it is. The board is my bet. I have a 5 year old lumina 600 that works perfectly, but NiteRider seems to have forgotten about quality control. I need another light but may have to choose another brand. There is a I messed up on this one. I replaced this unit with another one, and realized my mistake. I have an older lumina. When I took the 900 out of the package, I thought it was faulty, but it was actually unlocked. I found some information on the internet that said the behavior was due to a loose battery connection. I didn't go back to the instructions. And immediately received it. I didn't read the instructions that said it needed to be unlocked. I saw it on the new Lumina 1000. This is the first time I have returned something that wasn't faulty and I feel stupid. The 900 came with a rubber band, not the nice screw on clamp that my older unit had. The 900 I sent back was a bright light like every other Niterider product I have owned.
👤It died after being exposed to a rain storm. There is a I will tape a Maglite to my K-Edge mount that only fits the Niterider light. I'm done with this boutique. I need things that work consistently when I'm away from tools and services. There is a I was trying to save time and money by purchasing this garbage instead of investing in and developing my own designs and constructing them, which could cost ten times as much as the Niterider abomination. I hoped that my concerns were addressed by Niterider for a reasonable price for excellent engineering and construction. The inferior product was pathetic. Angry. Disappointed. Poorer. The entire experience made me feel cheapened. This company and its subsidiaries were done with. Someone owes us an apology for being deceived out of our hard-fought dollars.
3 curved and 3 flat mounts are in the box. Each pack has 3M manufactured glue. The standard thread screw is used for some portable speakers. Attach the tripod to the bike motorcycle and tube. Measure the Diameter of the handlebar and tube before you buy it. The net weight is 55g and the bearing weight is up to 10 kilograms (22Ib). Through rotating the ball head, make the device in the right direction, Multi-angle rotation, easy adjustment for optimal viewing.
👤I ride a trike while I write about it. I use three cameras and they are all expensive and if they get broken, I am out of action. There is a I bought and threw away many of the expensive mounts I bought because they weren't secure. There is a This one was cheap and lightweight, but it was sturdy when mounted on my trike. The threads and tightening nut for the ball head are made of plastic. I will put my worry on the shelf because they have shown no evidence of degrading or breaking. Even though it is inexpensive, it is sturdy.
👤I used the clamps on the handlebars of my bicycle to attach the speakers to. I ride the beach and streets and the clamps are very good for that. They are strong and don't move. I was hesitant about getting these as the picture makes the threads on this mount not look long enough to tightly screw things down, but the threads are plenty long enough so not an issue. The mounts are nicer than the ones I got for the speakers. It's pretty universal. I have thick handlebars. I have trouble getting the clamps big enough and this fits that. I have a mount on my handlebars that is also on the smaller side and I have a handlebar exstention that is on the larger side. I have to wait for the mounts to last. How long will it last? The test of time. I'll find out how these mounts hold up when I ride a lot. So far, so good. If you're looking for a good universal mount, I would recommend these mounts.
👤This review is for a while. There is a I had to mount it upside-down on the lower drop of the bars because it was too small to fit on the top of the road bike handlebars. The two pictures should be noted. I had issues with the camera moving out of position due to the vibration after I mounted it. I was able to tighten the thumbscrew several times and it still vibrated even on bumpy roads. You will likely have to be persistent to get it to set in place. I found that it can be adjusted after that. I have not been able to judge long term durability, but it seems like a good study for use on a road bike, road motorcycle, or similar use. I'm not sure how well it would hold up on a mountain bike. This mount works for money. If I had a suggestion for the manufacturer, I would recommend a larger diameter clamp as there aren't many bicycle handlebars that fit anymore. I would recommend a double thumb nut to hold the ball joint tighter. It would be better if the thumbscrew was larger with a better purchase such as a lever or large star shape. The design could be better for the same cost. It could be easier to tighten the ball joint. It would be easier to use, more robust and still small. It could be supplied with a larger one. There is a I would rate it 4 stars for the price.
Bicycle headlight gopro mount products from Light & Motion. In this article about bicycle headlight gopro mount you can see why people choose the product. Ezyoutdoor and Hsu are also good brands to look for when you are finding bicycle headlight gopro mount.
Light & Motion, Ezyoutdoor and Hsu are some of the best brands that chosen by people for bicycle headlight gopro mount. Find the detail in this article. Garmin, Mongoose and Tusita are also brands that their products are worth to check.