Best Bicycle Hangers for Garage Ceiling Mount

Garage 26 Jun 2022 10+ Comments Open

1. 4 Pack RAD Cycle Products Bicycle

4 Pack RAD Cycle Products Bicycle

A life time warranty on top quality. It was made in Taiwan. The product weight is 1.96 kilograms. 4.35 lbs. The rubber coated hooks are designed to protect your bike from scratches. It's easy to install, you just need to mount to your ceiling joist or rafter. You can have your bicycle hanging in your garage with the minimum of tools. There are four rad bike hoists. Heavy products can be lifted up to 100lb. There is capacity. The bicycle hoist is the one the other are trying to copy. They do not cut corners. You've heard of the original RAD Bike hoist. Indoor ceilings can be up to 12 feet high. You won't know what to do with all the floor space once the bike is out of the way. The safe locking mechanism prevents accidental release. No one wants to find their bike on the floor when they come home.

Brand: Rad Cycle Products

👤There are a couple things about this. I like the idea of this, but there are some flaws. The hooks on the hoist system are just bars. It has a curve but not much to make me feel safe about my bike being in the air. There is a This doesn't fit on a 2x4. You have to angle the screws on the 2x4 to get them to tighten. There is a The screws are next. The screws that come with it are cheap. The screws were stripped during the install. There is a It's a good deal if you rig it yourself. Different screws, bending the hooks, and getting a 2x6 instead of a 2x4 to install this.

👤I tried 4 different bikes and each one had the same program. The bikes fall off the hooks. 1. Hooks aren't hooks. They are a bar bend with a piece of rubber on them that are constantly sliding off. I had to bend the hooks in a way that would allow them to hang on to the handlebars. The seat hooks are only usable on a big bike seat that you can find at walmart. I couldn't secure the seat hook to my Santa Cruz Tallboy or Giant Defy Advance even though I did what I could. I have experience that the standard bike shop quality seat has no place for the hooks to grab. 2. The rope is terrible. Gloves are required to prevent rope burn when raising or lowering the bike. 3. It's not easy to store bikes. If you ride daily like me and my wife, it's hard to raise and lower the bikes.

👤I needed to make more space in my workshop. The value is under 40 for four. There is a The product quality is very good and it took no more than 30 minutes to install the rest after the first one was up. There is a The only concern I have is how long the cord will last. It's a coarse weave. The cut ends weren't properly sealed so they were unwrapped. When raising the bicycles, the cord runs through a small hole in the mechanism, which locks down on the cord. The cord will fail through rubbing and pinching eventually, I guess, because of constant use and always raising to the same level. The bicycles will be stored for a long time without much raising and lowering. There is a If you need storage, go for it.

2. Stalwart Storage Bicycle Foam Bike Accessories

Stalwart Storage Bicycle Foam Bike Accessories

Hardware and instruction are easy to use. The bike wall mount rack is easy to install. When parking your bike at the end of the season or simply done riding for the day, store your bike easily with the Bike Rack from Stalwart. The bike hanger is practical and sturdy. You can fold the brackets up so that they are parallel to the wall and out of your way when not storing a bike on it. The Stalwart Bike Wall Mount is a lightweight design that protects your bike frame from sliding. It is suitable for all types of bikes. Attach the bicycle mount to a wall stud in your garage, at work, or in your house and keep your bike handy and ready to ride. All hardware is included to make sure your bike and mount are secure. There is a product with dimensions 13 25 inches x 11 inches. The weight capacity of the wall mount is 50 lbs. The absolute best price and value on their entire line of products is what they are committed to. Also, note: Only Bike Rack Wall Hooks by Stalwart are genuine and this is an exclusive product.

Brand: Stalwart

👤This thing is crazy. I gave my coat of black to match the wall I hung it on, so don't let the color fool you, it is definitely silver/grey when it arrives. The screws are thick and long enough to hold my bike. It's high quality at the right price point.

👤It is easy to install and looks nice. 2 stars off for the included hardware screws. The wood screw is really bad. A picture of the included screw after 3 seconds with the drill. I spent 45 minutes trying to get the screw out of my wall, and lucky to be able to do it. The screw is made of clay. There is a I would feel the need to leave a less than perfect review if a 25c screw left a bad taste in my mouth. Don't use the included sewer, you will be reprimanded immediately. Don't make the mistake I did. I read all of the bad screw reviews and thought they were dramatic. They were not.

👤If only my bike had a straight handlebar fit, I could get it in the hooks, but the only way I could do that was to turn the front wheel away from the wall. The hooks are supposed to fold up against the wall when not in use, but when I tried to do that, they just fell down. The rack hooks were removed and will look for a solution. It might work for smaller bikes since it's priced right.

👤You should replace the Zinc screws with the ones that come with the STAINLESS STEEL screws. The screws strip completely when I use them. I had to hold the screws the rest of the way in. When I want to move the racks, I'll have to drill them out.

👤I was worried this wouldn't hold my bike. I was not sure if it could hold all the weight. I didn't check until I got it. I have had it for a month and it seems to hold my bike perfectly. I put it on the wood beams in my garage. I am worried if someone puts more weight on it, it may cave, but so far it has been holding it down. There is a I have a female bike. I had to install it at an angle. If you're looking for a basic bike mount, I recommend it.

👤It's not much to like. Poor quality screws. Not very heavy duty. The top screw holds the weight. The bottom screw will snap off if the top screw goes. I added a new hole in the middle and installed larger and longer screws. Does not stay out of the way when not being used. When you hang your bike on it, you are moans and groans. I own a bike that is 28 pounds. If you install better screws and don't care if they stay in the down position, it's fine. Would not buy again.

👤One of the screws had a broken tip and I was a little frustrated. When I hung a bike for the first time, the screw broke near the head, and I was frustrated. It didn't fail later and fall on someone, so I should be happy. There is a It doesn't stay in the horizontal position. I don't know if it's a bad design or if it's a defect. It seems like there is nothing to hold it up. I can push it against the wall and it will fall down.

3. Ihomepark Ceiling Hooks Garage Organizer Bicycle 2

Ihomepark Ceiling Hooks Garage Organizer Bicycle 2

The shelving hooks can be used in hanging bicycles, as well as hanging large tools, sporting goods, lawn chairs and other items. The garage Storage hooks are made of tubular steel which is sturdy. When properly installed, their heavy duty ladder hooks can hold up to 50 pounds. There are two holes on the left side and two holes on the top that can be used to install garage organizers. You can put it in the garage, shop, basement, shed, kitchen, bathroom, utility room and more. It works on a lot of things, including hardwood, studded walls, block and brick. It's easy. To install, you need to make a small mark where the center of the screw will go, and drill a hole in the spot you marked. Make sure the hole is deeper than the anchor. The anchors should be inserted into the hole. Use a screwdriver to screw the bolt. The heavy duty utility hook size is 9.0%. There are 8 screws and 8 wall plugs in the package. They are committed to make sure their customers are satisfied with the purchase of wall mount garage utility hooks from them. If you have a question, please contact them. They want their customers to be happy. They are committed to make sure their customers are satisfied with the purchase of wall mount garage utility hooks from them. If you have a question, please contact them. They want their customers to be happy.

Brand: Ihomepark

👤I needed to hang a heavy extension ladder under some cabinets in my garage because there was not enough space to work with. These brackets fit the bill nicely. The rope on the extension ladder can get in the way, but the brackets themselves do a nice job. I had to modify the brackets slightly by removing the cap and cutting the amount of space for my application, but it was not a big deal. The screws that come with the brackets look ok, but they are round head with little bit depth and strip easily. You'll be fine if you use some flat head screws. A lot of people complain about the size. The EXTERIOR dimensions are 6.3" wide and 9.4" tall. You may need the INTERIOR dimensions, which are 4.85" wide and 7.95" tall.

👤This was the worst purchase I have ever made. It's not possible to put a screw through these hooks. The hook blocks the holes from getting a drill or screwdriver. The screws are garbage. They strip immediately to the point that they cannot be removed completely. I can not finish installing this item. I can't get it off. Over the years, I have mounted many things. This garbage is not something that can be put in a container. It is trapped half installed. I couldn't send it back if I wanted to have that headaches. Don't buy it!

👤These are large enough to hold my folded 8 foot step ladder. I bought another brand and found it was too small. They are what I needed to hang my ladder from the ceiling.

👤To hold a tow cable on the hooks and a latter across the top of the tractor roll bar, it was installed. If you want to hang a bike by the rim, you need to come out from the wall.

👤The beach chairs were hung in the basement.

👤The combo shelf and lumber rack were supposed to be in the garage. I have used a similar item in my other house, but it is so small you can barely get 3 2x4 under the top shelf. These are not the best options for hanging a bike. One person... They are the size listed. There was no detail on the brackets.

👤It arrived quickly. I could find good stuff at the hardware stores.

👤The brackets are small. I thought the picture was bigger when I saw it. I am not coming back since I messed up and didn't read the comments.

4. Extra Large Utility Hangers Ceiling Furniture

Extra Large Utility Hangers Ceiling Furniture

Storage hooks give a resting position for your bikes. If you want to keep your bike out of the entryway, you can hang it on the wall and leave room in your garage. The 8 inch hooks with 4 inch wide opening are much more heavy duty than other 5” or 6” smaller hooks, and are unique extra large size in the market. 1/2 inch thick all steel construction provides 120lb maximum capacity per hook, which is the strongest in the market compared to 70lb capacity from other hooks. The threaded screw end allows you to easily tighten the hooks into the wall stud or ceiling joist after drilling the pilot hole. Non-marring and non-sLIP is a soft vinyl coating that protects the surfaces. It's ideal for ceiling hanging or wall mounting of bicycles, ladders, lights, lamps, recreational equipment, lawn tools, cords and hoses in your home, basement, garage or workshop. It's ideal for ceiling hanging or wall mounting of bicycles, ladders, lights, lamps, recreational equipment, lawn tools, cords and hoses in your home, basement, garage or workshop.

Brand: Efficere

👤Excellent for hanging bikes. I like it. I made two orders of 8 inches bicycle Hooks and 12 bikes fit in a 10 feet wall. This is a good one to recommend. It's a lot of work.

👤I bought those black ones from other sellers. It is too small and soft. It bends! There is a This one is perfect. 3 pairs for 3 bikes. Less stuff in the garage.

👤You could hang a VW up. They are a lot heavier than I thought. More than I needed. I'm fine with that as well. Better than not.

👤I used a drill bit for the pilot holes. The hooks were screwed into the holes I drilled. I have a lot of lawn equipment hanging from them and they are sturdy. Those will be holding up for a long time.

👤I need these heavy duty hooks. The size is perfect and the price is unbeatable.

👤I bought other ones and they are not as strong as these.

👤Excellent product and pretty much what was advertised. The description says "4 inch wide opening", which is not true. The attached picture shows it is closer to 3 1/2. There is a I don't believe for a second that this will support 120 lbs, but it will hang from the ceiling in a 2x4 position. I was able to get my gauge up to 95 lbs by using a top out of 100 lbs. I hung from it, so it supported my body weight. I only did that for 5 seconds and I didn't feel anything bend. I could feel the end of the hook starting to bend when I put my body weight towards it. The dimensions are accurate for most of the time. The widest part of the opening is closer to 3 1/2 than the 4 inch wide opening is implied. If you bend it to have a wider opening, that could also reduce the structural integrity, making it so it wouldn't hold the same amount of weight without bending. The description says that the steel is 1/2. There is a soft matt vinyl coating on the 1/2. The steel is only 1/3. It's still a strong picture, and you'll probably be interested in the dimensions. The larger drill is better for the pilot. It will take more elbow grease to get it in there, but it will be much more secure in the 2x4 stud. You have to find a stud to put this in.

5. Stalwart 75 ST6016 Flip Up Storage Bicycle

Stalwart 75 ST6016 Flip Up Storage Bicycle

The bike fixed hook is an ideal choice. The bike wall racks are a great solution for storing your bikes. If you are looking for a sturdy and efficient bike rack, then this Gootus bicycle wall mount is what you want. They will be happy to help you if you have any questions. When parking your bike at the end of the season or simply done riding for the day, store your bike easily with the Bike Rack from Stalwart. The bike hanger is practical and sturdy. You can fold the brackets up so that they are parallel to the wall and out of your way when not storing a bike on it. The Stalwart Bike Wall Mount is a lightweight design that protects your bike frame from sliding. It is suitable for all types of bikes. Attach the bicycle mount to a wall stud in your garage, at work, or in your house and keep your bike handy and ready to ride. All hardware is included to make sure your bike and mount are secure. The weight capacity of the wall mount is 50 lbs., with 2 inch wall mounting screws. The weight capacity of the wall mount is 50 lbs., with 2 inch wall mounting screws.

Brand: Stalwart

👤I think the screws have been upgraded as they were steel not aluminum and thick. I figured out how to hang them vertically so that we don't have to lift our bike over another and so far they seem great.

👤Get better screws before you install them. The screw became stripped as I tightened it. The cheap quality of hardware they send is shown if a screw is stripped from my hands. Get better screws before mounting. There is a The bike is held in the rack.

👤The need to get the bike off the ground during the winter months in Wisconsin necessitated the purchase of the rack. There were many reviews indicating issues with the screws. The reviewer used a 5/32 inch drill bit to drill the pilot hole. The screw threads were waxed. The piece of cake needs to be installed. The bike is on the rack and ready for winter. The bike arms are designed for round frames and not frames which are more flat. It works well for the flatter frame, but rides a little above the bottom of the arm. The rack is very durable and a good price.

👤These are great and great because they save a lot of space for you by using the wall instead of occupying space that you could use for something else and very reasonable price. I got 3 of them. They had their own screws. I've been hanging the bike for a month and they are reliable.

👤It will not sit on the wall because it came bent in a very awkward way. They decided to strip the screw heads. There is no way to remove the bike rack from my wall. The instructions on the Amazon page only told me to screw into the studs. It sticks out a lot. I need this because my bmx bikes have very wide handlebars and an ordinary bike will stick out and take up a lot of the room. My bmx race bike is 22 pounds and makes it flex a bit. If I put my other bike on it, how much it would flex?

👤The rack works well. Some users had complaints about the mounting screws. The hardware is fine if you drill a 5/32" pilot hole and use the correctsize phillips screwdriver. I think others were using a smaller phillips.

👤It is easy to mount and hold my mountain bike. I put the supplied screws in my parts bin and pulled out a couple lag screws with washers and mounted it. Job done! You can see from the photo that it seems to apply a little pressure to the cables, but they still move freely. This is a wall mount and also a cheap work rack because I can make adjustments to my brakes and derailleurs. My frame is an older aluminum one, so it's at least 30 lbs. I think this is durable enough to last.

👤I know what I'm doing when it comes to carpentry, so I don't think this is on me. The stud was located and the pilot was drilled with a 3/16 bit based on visually matching the screw. The head started to strip in a bad way when the screw was halfway in. I tried to remove it with a drill or a hand tool, but the stripped screw made it impossible to do so. The head was shorn smooth by the driver. I didn't use a small driver bit to start. There is a I was able to twist the screw out of the wall with a pair of vise grips, but it was very slow. I need to re- install my screws. I'm giving this two stars because no product should come with installation hardware that ruins the utility of the product.

6. SMARTOLOGY Storage Ceiling Bicycle Utility

SMARTOLOGY Storage Ceiling Bicycle Utility

100% QUALITY SATISFACTION: They make sure to give you the highest quality product and guarantee 100% satisfaction. If the product doesn't meet your requirements, return it to them and they will replace it for you. There is an 8-pack heavy duty steel bike utility storage hook. The dimensions are 6 inches long and 2.6 inches wide. Good gift for Christmas. Installation is easy because of the thread design. When using their bike wall mounts, make sure to install in a stud/wood wall to make sure the hook stays secure. Proper anchors are not included for drywall. The hook is constructed from heavy duty galvanized tough steel with a soft matt vinyl coating to prevent scratches on your items. The hooks can hold up to 60 lbs. It's versatile and reuseable for ceiling or wall hanging of bicycles, power recreational equipment, furniture, lawn garden tools hoses, in the garage storage, home, apartment or wherever you store your items. They are a US business located in California. Your purchase is covered by a 12-Month Warranty and 60-Day Money Back Guarantee. They are a US business located in California. Your purchase is covered by a 12-Month Warranty and 60-Day Money Back Guarantee.

Brand: Smartology

👤I bought these because theTEKton Heavy Duty pair I had originally purchased were out of stock. These seemed similar and had good reviews, but they were smaller and less sturdy. As I screwed them in, the rubber coating began towrinkle. I think they'll be able to hold it. I worry about heavier items. Overall disappointing.

👤Installation was a pain for the items. The threads don't go all the way to the tip of the screw so it's very difficult to put in. I found that a 7/32 bit worked the best. It was too small for 1/3 inch. You need to be very careful when putting the hooks in because the rubber around the end of the hook is torn. I was able to move the rubber coating to cover the break, but it was just a cover up. It would be too much of a hassle to come back and look for another set of hooks after putting them. I had 9 hooks in one package so it was a convenience.

👤The bike storage hooks are not bad. It is the cheapest way to suspend the bikes. The hooks are too short if you're going to hang the bikes from the cross members. The handlebars and seat made it difficult for me to use the hooks on the upper frame of the bike. Some people like to hang their bikes. I don't think that's a good idea.

👤I am really happy. I ordered the hooks for my garage. They are very easy to install. If you use an existing hole or drill a small hole, just insert and turn it until it's tight and stable. It's easy! I saved a lot of space in my garage by hanging 4 bikes. I was able to use the other hooks for different yard equipment. I'm very happy with this purchase. They arrived on time and I will definitely buy them again in the future.

👤You get what you pay for. The hook had 20 pounds of weight on it. The screw portion of it was sheared off by a small amount of weight. I thought it was the wood that failed, but it was actually the very low quality hook that failed. If you don't like your care, don't hang things near your car. I like to wait to write reviews. I wanted to use them for a project when I bought them. This is what happens when I use them.

👤The thing had a hard time getting through the wall. The gypsum plaster sandwiched between two sheets of thick paper was a challenge. It wouldn't make a difference. I can't hang a bicycle and extra set of wheels. Back to the home depot for the hook.

👤The steel appears to be hot dipped. The steel has a matted plastic coating that covers all of the steel. I wanted the steel to be covered so that it wouldn't get scratched. These fit the bill. The wood was dry and hard so a pilot hole was required to put the hook into a 2x6 The hood works as expected.

7. Auwey Hanger Storage Foldable Bicycle

Auwey Hanger Storage Foldable Bicycle

The bike wall mount vertical has a maximum hanging weight up to 66lb and greater clearance from wall to bike to fit a wider variety of bicycles. No assembly is required to save space. You can hang and detach the bike with the fixed hook. It's great for shed corner and garage storage. The wall bike rack has a hook with rubber coating to protect your bicycle from scratches and a locking mechanism to prevent accidental release. Rubber cover to prevent scratches. The arm of the wall mount bicycle hanger is made of soft rubber. The sturdy and durable construction is designed to protect you bike better by holding the bike frame instead of the rim. When you are ready for a ride, the bike rack is the ideal way to store your bike. Lifetime warranty is provided by them and they stand behind their product. If you don't like it, just return and they will give you a full refund.

Brand: Auwey

👤The wall mount works. The mounting instructions and hardware are not up to par. If you are mounting the brick wall on the stud, the screw will not work. Not additional hardware provided to mount on the wall.

👤I needed to organize my garage so I bought some bike rack to hang my bikes on. They are very sturdy and can be folded up to get out of the way when not in use. Shipping was fast. It was easy to install because it comes with all the screws.

👤I put wood screws and washers in a stud in the garage and they work great.

👤It's a great way to hold bikes up and out of the way.

👤The bike hook does a great job. It folds up to save space when not in use. This is what you need if you have a small space for your bike.

👤The bike is hanging from the cement block wall. The price was correct.

👤Very sturdy and easy to hang. What you could want from this? If attaching to a stud, hardware was a bit over the top. I would prefer more hardware over something that isn't enough.

👤It's perfect for our garage. It's out of the way and safe.

8. Eapele Horizontal Heavy Duty Compatible Platform

Eapele Horizontal Heavy Duty Compatible Platform

A multi-purpose lock includes toilet locks baby proof, bookcase anchor, tv safety straps, oven lock child safety, furniture anchors for baby proof, wall anchors for furniture, childproof cabinet latches, and toilet locks baby proof. Space saving If you want to keep your bike safe from damage, you can put it on the wall, just lift it off the floor and put it on the rack. The unique design of the wall bike rack looks like a cute cartoon image design, which can be used to display your bike like a work of art, and is a convenient alternative to store your bicycle. No assembly is required for easy installments. The brackets can be easily fit to the wall with all the screws and anchors included. Also, note: The wall has a mount on it. Unless there is a wood stud behind the wall, don't mount the hanger on the wall. The bicycle mount is extra strong and durable and can hold up to 150 lbs. The size of the pedal hook'mouth is small, which is suitable for most types of bikes, such as mountain bikes, road bikes, folding bikes in apartments, office environment, houses, garages, yards and sheds.

Brand: Eapele

👤It's easy to mount a bike, it doesn't move. A low profile. The biggest challenge is sticking out the Mountain Bike handle bars, and the locations you choose for the three pieces will only work for one size bike. There is no mixing and matching bikes on the wall. There is a The screws are garbage. The drill breaks the heads. You should get your own screws.

👤These are a cheaper alternative to the more well-known brands. They are sturdy and have some decent hardware. I put the main center mount into a stud to make sure it was secure.

👤The bike rack saves us floor space in our apartment and it does the job. The hardware that comes with the mounts is not very good, but it is still cheaper than the next brand. There is value.

👤It's a good product, but it has poor installation hardware. cheap plastic and imported metal are used in the screws and wall anchors. The plastic anchors warp and the heads broke. If you want to install it the right way, you should buy your own wall anchors and screws. They are easy to install, sturdy, and the value is good if you don't count the mounting hardware.

👤A great item for tires. The bike will fall if the tires are damaged.

9. Indoor Bike Rack Bikes Silver

Indoor Bike Rack Bikes Silver

The solution is perFCt. You can display your bike in any room with a wall mount bike rack. Keep your garage or indoor space tidy and free up your floor space by storing your bikes in a convenient location. The wall bike storage unit is great for homes and apartments. The widest bike wall rack in the market is 33” wide. The bikes can hold up to 30 kilogrammes. Not compatible with heavy bikes. Bike Wall Storage allows for convenient storage and removal. The heavy-duty bike wall rack has a high strength rail. It is the best-looking bicycle wall rack in the market and will look great in your garage or home. Wide oversized hooks fit different wheel sizes. The storage system can be used for road, cyclocross, touring, hybrid, bmx, kids, MTB, beach cruisers and even Fat Bikes. Wheels are protected when hung with high quality hooks. Theangled design of the hook makes it easy to mount bikes and takes the pressure off the wheels, rims and spokes. It is easy to install in minutes with the included screws and bolts. TheVideos for this Product section has a helpful How to Videos section. The bike rack is wide and can hold bikes up to 30 kilogram/ 66.2 lbs. The standard US '2 x 4' (or '2 x 6') wooden stud is 16 inches from each other's center. It is not compatible with the stud which is 12” or 24” from each other's center. If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall rack on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it.

Brand: Pro Bike Tool

👤If your dry wall studs are not 32 inches apart, this bike rack won't work. The product description states that it works on Plasterboard, Dry or Stud Wall. The template for the holes to be drilled for the rack is 32 inches apart, and the interior garage wall has the studs spacing 18 inches apart. I mounted the right side into the stud and used 50lb dry wall anchors on the other side. After placing the second bike on the rack, the side with the dry wall anchor pulled out of the wall. If you can mount it into the wall, it will work.

👤The advertisement states that the rack works with up to 5 tires, but it is easy to follow instructions and use the template for the screws. It could hold my fat bike, road bike, and cross bike. The hooks are small on the unit that I received. Maybe I was mistaken and there is another rack with larger hooks. I can hang the fat bike on the rack, but I wish the hooks were longer. My dog only has four tires. Couldn't imagine trying to mount something bigger on these hooks. You have to make sure that the end of the hook isn't pushing into the fattie wheel. The fat bike is in the middle and the aluminum channel is pulled away from the wall in the center. There is a We'll see how it holds up. If you are using it for skinnier tire bikes that are not heavy, it is a great rack.

👤The bike rack is nice and works well. It's very easy to install if you have standard wood studs. The installation instructions make it seem like it's much easier to install than it is. I think it's hard to get a full sized 10 speed bike up onto the hanger. My wife can't do everything an average man can. It is easier to get them down. She can do that. She could probably get them hung up if she really worked hard at it. There is a It works great, but you need a little strength to actually use it. I can't find the button to attach pictures.

👤The instructions for mounting the rack were good. I had to mount a piece of lumber first because the location I chose didn't have the right spacing for the mounting holes. It was easy to mount the rack from there. The corner of my garage is where the rack is located. I had to figure out how far from the side wall to place the rack and still have room for a bike on, accounting for handle-bar width and hook placement. Your buyers might benefit from some guidance on this. The red hookcovers are cheap. I'm not sure they're needed, but more for aesthetic reasons. The shipping package had two halves of a red cover stuck together. I tried to pull the pin apart, but it broke. Oh well. Amazon sent me two sets of hooks and mounting hardware. I was able to steal one of the red clips from the spare set. It seems like a waste. I will not use the extra hooks. There is a I bought this rack because I thought the design would allow me to roll a bike up to the rack, lift one wheel and then roll it right onto the hook, with one tire still on the ground. I wouldn't have to lift the entire weight of the bike. The directions for this rack are very specific about how high off the floor the rack should be. I put up the bikes for the first time after following the directions, but not a single bike touched the floor. All three bikes have at least two to four inches off the floor. I am aware that bikes have different lengths. You might want to think about how far off the floor you want the tires to rest and account for different wheelbases before you mount this rack. I still have to lift the entire weight of my bike up when it's mounted off the floor. I ride a large mountain bike that is 27" in length, and I am 5 feet 10 inches tall. The prescribed distance between the hooks should be more of a suggestion. Depending on your bikes' bar width and how you hang them, you can have different spacing of the hooks. There is a The rack does what it says. I was able to mount three bikes. The bike rack is sexy for anyone who cares about bikes and is willing to pay for it. The cost is high, but the rack should last forever, the only breakable parts are expendable. There is a What does "sheerness" mean for Amazon? I'm having fun imagining.

10. Stormann Garage Horizontal Storage Bicycle

Stormann Garage Horizontal Storage Bicycle

It's easy to install on your bike, just loosen the lock on the bike and tighten the screw, it's a great choice to replace the damaged bike kickstand. It's the perfect accessory for your bike trips. The bike hooks for the garage are designed with a special coating to prevent accidental cracks or scratches. The hooks can hold up to 50LB. There is free up floor space. The bike rack is horizontal. It frees up garage floor space by keeping bike off the floor. It's perfect for a garage, home, orshed. It's verSATILITY. The bike hanger can be used indoors and outdoors for all kinds of bicycles. You can use it as a bike repair stand. It's a good choice for storing and holding your bikes. It is easy to install the bike rack by one person using common household tools. Make sure that you install the bicycle hanger on solid walls only. If you have any questions about their products, email them and they will respond as soon as possible. If you have any questions about their products, email them and they will respond as soon as possible.

Brand: Stormann

👤It's what you see. It is easy to install. There are 2 sets for kids and 2 for adults. The arms only go up and down when not holding a bike. You have to figure out where the hooks are to balance the bike on the wall. It was easy on a bike.

11. Storage Garage Bicycles Helmets Adjustable

Storage Garage Bicycles Helmets Adjustable

It's suitable for most types of bicycles, such as mountain bikes, road bikes, folding bikes, etc. Can hold up to 65 pounds of bicycle. Their wall mount bike rack holds up to 500 lbs of equipment and is made of heavy duty steel. It can hold a lot of things, including bicycles, shovels, rakes, brooms, cords, ropes and more. It can hold up to 6 bikes and 5 helmets at the same time. Situated space -- The bike hooks system will let the bikes go off the floor to free up some space. Most bikes are compatible: mountain bike, road bike, folding bike, adults bike and kids bike. All hooks can be moved anywhere on the panel when storage needs to change. Easy-clicked hooks can be installed quickly. It's easy to put on or take off the bikes. It is super material for defense. The bike rack is made of high-quality steel. The steel is powder-coated to resist rusting, chipping and cracking. The sleeves prevent the tools from sliding. The bicycle garage rack is easy to install and can be done in a few minutes. There are 6 bicycle hooks, 3 tracks, and 5 accessories hooks in the bike storage hanger. The bicycle garage rack is easy to install and can be done in a few minutes. There are 6 bicycle hooks, 3 tracks, and 5 accessories hooks in the bike storage hanger.

Brand: Hutigertech

👤There are six bikes, two adults bikes and two small children's bikes. They fit. Only with a significant space between the two panels. Unless you intend to use them, you can't place them side by side like they are in the picture. I can't imagine using these with four adult books, even if you had the two panels spacing out.

👤It was easy to secure the plates for the rack because our garage is not finished. I used the screws that were supplied to hang my beach cruiser. After reading a few reviews, I was a bit concerned but the package arrived the next day. I knew the screws were going to be fine when I saw them. If you factor in that, you're going to be hanging multiple bikes. Unless you're hanging kids bikes, don't use wall anchors. You will not be able to save your wall. If you don't have easy access to the studs, you will have no issues or worries.

👤There is not a lot of room for a full size bike. It encourages it to handle. It should be fine if you have some kid bikes. It has stood up to kids. The rubber on the hooks should be reinforced so they don't scratch your rims. After a month of use, they were exposed.

👤The instructions were easy to follow and the materials were good. All and all this was done in 30 minutes. It is for 6 bikes and although you get 6 brackets for bikes and 6 brackets for helmets, it is hard to get 2 adult bikes and 2 kids bikes in the space without it looking bunched up and trashy. This would work better if there was another panel.

👤You can only put up 3 bicycles if you can't mount the sections right next to each other. Don't mount the rail to sheetrock with just the wall anchors. The weight of the bikes will tear through you and leave a mess. I mounted mine to a piece of hardwood board which I mounted into the wall studs.

👤The track is 3 separate pieces, but that worked out better for me. I was able to spread them out a bit more to make it easier to fit the cruiser bikes that we have.

👤It was bought to hang the bikes. It is sturdy so far. It will hold 6 bikes, but it doesn't have enough room to hold the helmets, so it needs another wall mount plate.

Summary

What is the best product for bicycle hangers for garage ceiling mount?

Bicycle hangers for garage ceiling mount products from Rad Cycle Products. In this article about bicycle hangers for garage ceiling mount you can see why people choose the product. Stalwart and Ihomepark are also good brands to look for when you are finding bicycle hangers for garage ceiling mount.

What are the best brands for bicycle hangers for garage ceiling mount?

Rad Cycle Products, Stalwart and Ihomepark are some of the best brands that chosen by people for bicycle hangers for garage ceiling mount. Find the detail in this article. Efficere, Smartology and Auwey are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com