The materials are MATERIALS. 20% lighter than ordinary aluminum alloy is the refined 6061 aluminum alloy. Sturdy, rust-free, high toughness, no deformation. If there are any quality issues with their products, please contact them. They offer a 20 month seller guarantee. If you have doubts about shipping, exchange or return, please contact Amazon Customer Service. FunctionAL GASKETS: The height of the bicycle neck extender is increased by 4 x 2 cm. It is possible to modify it. The height of the extender can be adjusted by adjusting the number and type of spacers. Take the pain away from your back, neck, and wrist. The bicycle fork extender is easy to operate and high in strength. After T4 heat treatment + T6 heat treatment, the handlebar extender is stronger, more resistant to oxidation and corrosion, not easy to loose, and safer to use. Easy installation and wide compatible. The installation can be completed by connecting the original front fork. Their bicycle fork stem extenders can be used on road bikes and mountain bikes. CYCLING COMFORTABLY: Handling more flexible, much easier to force when climbing, lighter weight, comfortable and convenient to operate, effective bicycle fork extender.
👤The extender is the perfect size, material and color for my bike and I wanted to like it. I noticed the handlebars started to twist after I took my bike for a short ride. The top screw appeared to have come loose after closer inspection. I decided to ride home to tighten it because I was not far from home. The handlebars gave way as I rode up the driveway. I fell. I inspected everything and followed the steps again after I told myself that I might not have installed the extender correctly. I tightened the top screw tightly. I took it for a ride this morning. It happened again a few minutes into it. The handlebars were not fastened. I can't imagine what would happen if I were on a busy street. It's dangerous.
👤This makes it bigger and harder. There is a You can see that it got bigger when you look down. Adding 4 more inches would make a huge difference. There is a It wasn't long before my wife noticed the extension, but now she's very happy I got it. There is a When it was short, I would have to bend down and my back would hurt, but I could plow through with this extension.
👤The handle bars on the cargo bike were too far forward. I'm too old to ride in this position. The handle bar could be replaced with a cruiser bike style. It is doable. I would have to replace cables and housing. The second option was to try the stem extension. It was a great choice. There is a It arrived in 2 days and was easy to mount. It does not look cheap or retro. It came with different sizes of spacers and a new longer top screw. The price made a huge difference in my riding comfort, without sacrificing looks or performance. The cables were long enough. The result was higher bar closer to the seat Win Win because my stem is tilted toward the seat. The center of gravity was shifted back toward the rear tire, which made the ride more stable. The small wheel in the front made me feel like going over the handle bar when hitting bumps. There is a The older style handlebar stems are different. The wedge at the bottom of the stem would be loosened if you loosened the top screw. You could change the height of the stem. The exposed top of the stem is bolted to the handle bar clamp, which is fixed in this type of stem. The video is titled "watch?" How to video. He's British.
👤The two screws to the stem are not as large as the original stem bolts, so some reviewers said the screws were stripped. There is less cross sectional material in the stem attachment. I see potential stress risers that could lead to failure. It's not possible to tell if the material was heat treated or not because the unit was drilled by the clamp area. Some stems extensions are made of forged alloy.
18 months warranty is offered by them. If the product has quality issues, please contact them. If you have any questions about shipment, exchange or returns, please contact Amazon Customer Service. Please confirm the size of Figure 4 before purchasing it. The high strength bicycle stem riser is 20% lighter than the ordinary Al alloy stem extender. It is hard to loose the handlebar extender. Strong in anti-corrosion and rust-free. FunctionAL GASKETS -- The bike neck extender can increase the height up to 85mm. There are more details in Figure 4. The stem riser can adjust the gasket to fit your needs, reducing the pressure of your waist. Simply connect up the original bicycle fork stem. Most of the MBT bikes have a handlebar riser. Handling more flexible, light weight, much easier to force when climbing is convenient.
👤I bought this fork-stem extender for a bicycle. The fork-stem and Giant handlebar stem are not affected by the extender. The finish quality is good, but it is a little more textured than the existing Giant rings and the Triwonder extender. This does not affect the items build quality. Installation instructions The upper and lower bearing races on this bike will fall if you loosen or remove the handlebar stem. The required upper and lower bearing tensions will be lost if you don't retain them properly after reassembly. After you install the number of spacers you want, and install the new fork stem extender over the fork tube, you will want to tighten the two stem extender screws on the fork tube just enough so that it does. The handlebar stem should be tightened in the same way. Next, you'll want to tighten the bar stem- cap on the fork tube until it doesn't spin easily. The last step is important because it will seat the lower and upper bearing surfaces to the bike frames head-tube. It is best to have the front tire and fork off of the floor, but it can be done if need be. Start by turning the handlebars slightly left and right. Keep turning the handlebars slightly left and right until you feel like you can't play in the top of the fork and bottom of the new fork stem extender. If you overtighten, you will damage the bearings and races. Now you need to align your handlebars and fork tube with the bikes top tube to make it look straight. The fork-stem extender and handlebar stem should be tightened.
👤I like the extension of the handlebars. I put it on my mountain bike because the handlebars were too low. I took it out on a trail the next day and it held up. The long bolt that screws down into the neck does not have a way to be tightened. There is no slot for a screwdriver, or a square head for a wrench. Its a rounded head. You can only run it down with your fingers. I used a dremel tool to cut a slit in it so I could use a screw driver. It's strange how a flaw could be accepted. There is a If you are comfortable with modifing, it is a good buy.
👤If you need to remove any brake cables to get this on, do not try to put the aluminum brake tensioning screw back into the brake /shifter assembly. I'll be buying a new brake/shifter assembly after I return this. There wasn't enough brake cable to get the handlebars over the fork stem extender. I had to remove one of the cables. The threads on both the brake and shifter assembly were destroyed when attempting to get the aluminum brake tensioning screw back into the assembly. There is a I wish the seller made it clear that the bike has enough cable for the "super long" version, because I know it's my fault for trying to get it to fit. I didn't know how fragile this stuff is.
Order now, and you will be able to pay free. If you have any product issues, they're very happy. Either you get a refund or a replacement for your purchase. If you have any questions, please get in touch with them. They will be glad to help. Extra space can be used to assemble more items such as light/bicycle computer/phone/bell holder. Installation can be done on Normal Size (25.4mm) and up to Over Size (31.8mm) Handlebar. Carbon Fiber and aluminum are lightweight and durable. The extension bar and the aluminum alloy brackets are light and durable, with only 0.93oz weight for the extension bar and 0.97oz for the brackets. The thick rubber straps on the inside of the ring are strong enough to hold your bars. You can have the extension brackets installed in a minute with the Allen Key Wrench.
👤I decided to give this one a try because it was impossible to find a bar mount that fit 35mm bars. I wasn't out much because it was cheap. The setup works with 35mm bars with about 10 minutes of work and 5 bucks at the hardware store. I used the following tools and hardware to modify for 35mm bars. Attach the bar extenders to your 35mm bars with thePhilips pan head screws. The top half of the bar fits snug. If you're going to snug the mounts to the handlebars, you should swing the bottom of the lamp upward. It doesn't close enough for the supplied bolt to thread through the mount. Hold pressure by squeezing the mount closed with one hand. If you want to drill through the bottom half of the mount's threaded hole, insert the drill bot through the top of the mount. You will need to chase the hole a few times to get the new hardware to fit through the hole. It may take a little force to push the new bolts through the bored-out holes. Attach the nut to the lock. You're done!
👤The clamps are a joke. It took me more than an hour to get this installed so it's tight enough to work, although it still isn't tight like I expect from a clamped product. I had to use 3M automotive mounting tape, which is very aggressive and very strong, to mount the handlebars. I had to use a pair of pliers to pull it together, because I couldn't get the screw to start. I'd have been out of luck if I'd had those items. This is the only one of the rest of the product that I could fit on my trike. It's small enough to fit in my space. The bar is strong enough to hold my bar-end mirror and bike computer. I would have given this 5 stars if the clamps worked right.
👤I need to add more accessories to my handlebars. There is not enough room due to my bike. This is light and well made. There are many pads of different thicknesses to fit almost any bike.
👤Good idea but not executed well. The plastic spacers don't prevent the device from sliding down when something is on it. They should use rubber to keep it where you want it to be. It should only take a few minutes, but it was a pain to put on. As you tighten, the spacers slide around. I used electricians tape to keep them in place. This is a marginal product, as it is made now, if they had rubber spacers. Useful only for light items. Can't put a bottle holder on it because it will slide downward.
👤We bought two of them. One star was taken off because of the lack of a grippy wrap and one star was taken off for installation because of that. The first one we installed wouldn't stay put because the hard plastic liner for the brackets didn't grip. We bought a handlebar wrap, but it didn't work. We had to think about when my brother-in-law's crew was trying to figure out a repair for his sailboat during the race. I suggested a piece of the rubber roofing that was laying around the marina. We got out an old spare innertube that hubby was carrying around as a spare for years and cut it up to make strips to wrap around the handlebars, then put the brackets on and tighten it. He is very precise and wanted the innertube strip to line up perfectly, so it was a two person job. I had to hold things together so they wouldn't move. It worked great on both bikes and we figured out the first round of the tournament. We wrapped them and trimmed them to make sure the number of wraps around the bar was good. We used the first one as a template to cut three more. We have lights, gopro mount, and phone mount on the accessory bar, but it hasn't come loose yet. He is disappointed that he scratched the first carbon fiber tube, but it doesn't detract from the bar. There wasn't room for everything with the stock stuff already on the handlebars. We would buy again.
The extendable bar is compatible. It is suitable for a 31.8mm caliber handlebar and can be used to assemble more items such as light/bicycle computer/phone/Bicycle tote bag/bell holder. The extended handlebar has a wide range of use, with a size of 7.87x0.86 inches, which can place code tables, mobile phone holders, flashlight, speakers, etc., to free up space and avoid excessive weight on the handlebars to avoid hidden dangers. High-quality material: the tough texture of aluminum alloy, sturdy and durable, not easy to rust, light and corrosion-resistant. The ring has a hinge design and the brackets are fixed by two screws. The double protection is stable. There is no need to worry about falling off. It's convenient and fast. The design makes the riding safe and beautiful. Installation is simple, the installation diameter is 0.8-1.25 inches, equipped with the same type of hexagonal wrench, can be adjusted left and right, easy to install, and only need to remove the extension frame when disassembled.
👤I liked the look, feel, workmanship, and price. I tried plastic, rubber, and electrical tape, but they did not work. I got it snug. I went for a ride with a light mounted and it rolled, the light pointed at the street. I threw it in the trash after giving up. There is a I don't normally write reviews like this, but it should fit a 7/8” handlebar. There is a The description should say so if it doesn't.
👤It was used on our car to make it easier to push. It would be perfect for a bike if I could use both grip inserts. It will work for what I need it for.
👤I wanted to add a positive review since there are negative ones. I didn't have any issues with it, it's easy to install, and it's perfect for giving me extra space for accessories and a spot in the middle of my handlebars for my headlights.
👤I needed an extension rack for the things my wife wanted to attach to her handlebars. This one was the best price, the right size, and easy to install.
👤They are to loose if they don't have rubber spacers. It's impossible to atart screws without crossthreading screws with rubber spacer. I have already spent more time than this is worth.
👤It is easy to install and use space. I put my phone on and my bike has headlights.
👤I mounted a light, cellphone holder, and hanging basket on my gotrax electric scooter.
👤Had to purchase this in order to mount a cell phone holder.
You can easily install and remove the extension brackets with an allen key. Extra space can be used to assemble more items, such as a bicycle computer, phone,GPS,bell holder,clip lamp frame, mobile phone rack, code table, horn, and so on. Fit for Most Bikes -- Bike Extender brackets fit for most bike handlebars, can be installed on Normal Size and up to Over Size, and 25.4mm handlebars need to be added. Double clip fixed Firmly locked,Thick Rubber Straps Gaskets on the inside of the ring that mounts to your bars won't slide and scratch your bars. You can have the extension bracket easily installed with the Allen Key Wrench. A lightweight material tube and a high quality aluminum alloy material brackets are included.
👤I got an aluminum tube that will work for my needs. Hard plastic spacers are useless. I put pieces of rubber inner tube under each one to keep them stable. There is a They lied on the description. The aluminum tube is very smooth and slippery, and had to crank the bolts tight to hold it in place. I would like to have the support clamps longer for more clearance, but they meet the length described. No objection.
👤The accessories bar has worked well for me for the past four years. The only reason it doesn't get 5 stars is because it has gone from black to brown in color.
👤It is junk. I will not return it. There is a The end caps are loose. They just do it that way and there is no reason for them to be loose.
👤I put this on my glion scooter and now have a better mount for my phone, gps, and gopro.
👤Give you enough space for the bell, light, phone holder, and so on.
👤It was large for my bar. The tape wouldn't hold tight. JUNK
👤The information is incorrect. The handlebars are 22mm in diameter.
👤It seems like it will work. It is easy to install light.
👤It's not as heavy as I thought it would be, but it's easy to install on my scooter.
👤Thecent item, seems to hold ok but needs to be tightened a bit.
The package width is 1 Inches. The extra long bicycle extension. The bicycle extender is 25 cm and can be used for bicycles with handlebars between 18-34mm. Before buying, please check the size. It is not easy to rust or fade, it is made of carbon fiber and it is well designed and sturdy. The design of the double Clamp and Gasket. The double clamp can be used to fix the handlebars. There are double rubber pads on the bar. Easy installation. The screw buckle is reliable. Double protection with high quality screws. It is easy to install and detach with the hexagon wrench. The bike rack adds extra space to your bike, used to fix bike lights, speedometers, gps devices, smart phone racks, etc.
👤It is easy to install. It's also light. It's high enough that I don't have to worry about bumping my knuckles on my scooter. There is plenty of room for three phone holders in my Pokemon go room. I had gotten a Segway scooter that was specifically designed for it. Those did not fit my vehicle. But, this? It works great. I am very pleased with this unit. I put it on today so I don't know about longitivity, but I am very happy.
👤I have read many reviews for bike handlebar extenders, and I have found that some of them do not hold the extender to the handle bar. Each of the extenders has a piece of metal that locks down on your handle bar. I didn't receive any rubber inserts to protect the handlebars. I cut two small pieces of rubber. The extender is solid. This is not designed to hold a bike basket. It will hold the accessories that make riding safer.
👤The double bolt makes it much more versatile than the single bolt w/hinge, it can be attached to a bar length that is long enough to add a mirror on each side.
👤It makes more than 2 inches between the bar and the extension. Others leave less room for the hands. I did not need the plastic inserts on the bar. There is a Overall satisfied.
👤This is well designed and made. It gives me great clearance between my handlebars and accessory bar. I changed my accessories after ordering the long-tube version and only needed a small accessory bar. I cut a piece of Pex-A 3/4" inside diameter tubing instead of cutting this nice tube. I cut it in half to reduce the chance of accessories slipping. There is an update. My Pex-A tubing is too slick, so I have to mount myself. I used a plumbing pipe cutter to cut a section of the curtain rod. It worked well on a bumpy ride. I'm ready.
👤I have been looking for a mounting system for my iPad for a long time and finally found one that works great. The all metal construction is very sturdy and my iPad holder is very secure. A 16” black aluminum rod is currently being planned to replace the short 10” rod. The accessibility will be moved to a better position.
👤This is the best at fit and strength. I was surprised by how strong the clamps were. I have a handle bar for Raceface. The straight part is 35mm thick and the tube is 35mm in diameter. The other extenders can only fit on the narrower taper and tend to slide outward and twit. This is advertised as 34mm capable. I was able to accept the 35mm. The two screws on the handlebars allow it to open.
You can order now and pay free. They can provide a lifetime warranty because they're so confident in their product quality. It was made in Taiwan. Installation of bicycle rest handlebars is so easy that it can be done by adding or removing shims. The bicycle rest Handlebar has a unique design and used to relax under a good road conditions. The bicycle rest handlebar helps you rest your arms, you can adjust it to fit your riding position. Aero Bars are suitable for road bikes, mountain bikes, triathlon, long distance travel bikes. Bicycle Aero Bars are made of aluminum alloy. They will make it up to you with an instant full refund if you are not 100% satisfied. They care that their customers are happy.
👤It's expensive and comes with all the hardware. Very poorly manufactured,peeling, rough paint,bolts cross-thread easily, extremely bad metal and machining advice are the cons. You get what you pay for. These are a set that will test your patience and will require careful mounting as to not damage your handlebars as well as the bolts. Make them safe to get on the road and tighten as you ride the first ride. Make sure they're even at this price point andtighten as needed.
👤I recently got into cycling and have had nice bikes for a while. I'm all about tracking myself and doing better than last time. I lock the front shock on my trek excaliber 8 29inch cross bike and just go. I don't mind not going as fast as the road bikes. I get a crazy workout. I am enjoying my bike. I got these because I have been resting on my handlebars and they looked clutch. I was hooked after getting them installed and fitting to my liking. Can I get these things to come lose? Not a chance. A quick stroll around the block turned into 14 miles around town. Simply can't go wrong for the price. I was able to zip like never before because I was able to ride in a full tuck position all the way back on my saddle. Thanks for the awesome product, the materials are solid, the stcrews are strong, and everything mounts properly, I will be buying another one for my fixed gear.
👤I bought it for my hybrid bike. It wasn't very compatible with my bike handle, which had the pipe diameter getting smaller from the center to the ends. I had to make my own rubber insert because the inserts made of metal were only designed for a single diameter pipe handle. The bars could be longer. I feel that the bars were too short for a short guy. The instructions are easy to follow. The materials are ok for the price. I like that there are numbers along the bars that make it easier to install them at an equal length between the left and right side. I like the pads that are soft and allow you to remove them when you need to.
👤I have long arms. Please measure your arms before ordering or finding out they are too short. Measure the diameter of your handlebars before ordering because the Allen bolts don't tighten securely. The plastic arm tray is the only one that will last with the exception of that.
It's suitable for most road bike, mountain bike, track bike, and BMX. The front fork stem diameter is 28.6mm and the handlebar diameter is 31.8mm. Before you buy it, please confirm the diameter of your handlebars. It is possible to change it. 70mm is the maximum height extension. 2 inches. The gasket can be adjusted to fit your height. 3 10mm includes 4 Gaskets. Approx. 1 5mm. There is a 3/16 inch and a 115mm screw. 4 inches It's suitable for most bikes with threadless headsets. Mountain Bike, Road Bike, and so on.
👤I have a bicycle that is attached to a smart-trainer. I had to raise my bars for a while because of my hip injury. This extension is great for that purpose. Good luck finding a pack of headset spacers for the price of this extension. It comes with a bunch of things. This is a good value for a trainer. There is a This is a flimsy piece of junk. The headset's top cap bolt is not heat-treated. The threading is not done well. You need to be careful when applying Torque because the bolts are fine metric threads. The bolts were not oiled. I wouldn't use this on a bicycle that rolled out of my driveway. Not a good item.
👤It works as expected. It comes with a sufficient amount of spacers and uses 4mm pinch bolts. I had to use a mallet to get the stem on. I think the coating they used is too thick, so I had to use elbow grease to get my stem on and off. I did not have to hit it very hard with the mallet. A rubber mallet is a must for the installation. There is a I would tighten the stem cap bolt after you take your first ride. I've only ridden about 20 miles with the extender on, but so far it's been great. It was the best $6 ever spent.
👤To raise the handlebars on my 20 inch redline mx20 bike, I used a good fit. I have my seat up high because I am taller. I was leaning forward when peddling. The center bolt was bent. I had to use the original plastic cap instead of the one from the kit. Got it to tighten up after that.
👤I put a stem riser on my bike. It fits. It makes riding much more comfortable as I am in a more upright position. It feels the same as before. I think it will hold up.
👤The product installation was easy and what it was designed to do was done.
👤A simple yet effective addition increases comfort.
👤The riser makes my bike rides more enjoyable. I don't have to hunch over the handlebars anymore. Very pleased!
👤It's easy to enstall and it looks great. Gave me a better riding position.
The Serfas headlight model numbers have a description below. The lightweight carbon fiber bar is made of durable aluminum alloy. It is suitable for a 31.8mm caliber handlebar. More items can be assembled with the super longer/extended tube. Tube diameter is 22.2mm. The body is super light.
👤I read a lot of negative reviews when I first saw this item. I picked this version because it seemed to be the most popular, and I really liked the concept. I went for a second to install on my Roubaix after buying one of these. I bought a third for my wife. There is a After reading everything from cheap to real carbon fiber... This is a quality item and I can attest to that. I have used this on three different bikes with different handle bars and not had to use the bushings. The bar is light and has a Cateye speedo/odo and a headlight. I moved the phone mount to the frame as there was only room for three accessories. The service guys were drooling over the accessory bar when I had my stumpy in the shop and asked where I got it. I don't want to discount the opinion of the people who had a bad experience with this item. I am sorry it didn't work out for you, but for me... It is the bomb.
👤They were not sure what they were thinking when they designed this. The handle bar's clamps are standard 31.8 cm so they will work on lost handlebars. The bar that is supposed to be used to mount things such as al lights is much smaller. Any thing that is designed to fit on a standard handlebars will not work. I couldn't get any of my lights to work on this because it's so small. I don't know what the function is suppose to be. There is a If you can figure out a use for it, then it is fine.
👤The bar is short. I thought the item would be shorter. There is a The risers are too short. The bar was barely high enough to fit through my fingers. There is a The little screw heads are not on the same side. I had to destroy the device to remove it. Make another bar and have a higher standoff.
👤I bought these to solve space issues with the sub brakes, which take up real estate on drop bars. The 32mm (1 1/4") handlebars were not a problem for the machined aluminum clamps, which fit nicely between the stem and the brakes. The carbon fiber tube is only about 21.5mm in diameter. I was unable to securely attach the strap-on bar mount for my computer because the mount was designed for larger diameter handlebars. I removed 47mm from the tube to keep it from interfering with the levers. I decided to use a slip-on cap instead of remounting the end plug as it makes a convenient storage spot for something small and light. A quality product. It would be great if it had a larger auxiliary tube.
👤It provides extra bar space to mount other devices. Time will tell if it is durable or not. The bar mount could be longer to allow more hand room beneath the bar and also raise a light even more to get over large front bags. As noted in another review. The bar is small. Adding padding to device mounts will make them work on it. I think bar too big is better. There is a It's worth the money.
The package width is 1 Inches. The bike handlebar extender fit most bikes and is suitable for handlebars of normal size and up to an oversize size. It is not easy to rust or fade, it is made of aluminum alloy, it is lightweight and sturdy. The design of the double Clamp and Gasket. The double clamp can be used to fix the handlebars. There are double rubber pads on the bar. Easy installation. The screw buckle is reliable. Double protection with high quality screws. It is easy to install and detach with the hexagon wrench. The bike rack adds extra space to your bike, used to fix bike lights, speedometers, gps devices, smart phone racks, etc.
👤The aluminum tube is too long for a 42" or 44" drop handlebars, so the extender is better suited for a mountain or comfort bike with a straight handlebar. It is easy to cut the tube. Installation on 31.8mm diameter handlebars requires a thin plastic insert, provided with the extender. Without the insert, it's too loose. It is difficult to get the screw through the hole with the insert. The hole of the screw is long and narrow, so if the hole in the upper part is not aligned correctly, the screw won't go. The hole should have been larger. A metric Allen wrench is provided, but it is not good quality, the metal is soft, and the opening is not big enough to hold the wrench in place. The black coating on the aluminum tube is not very good. This can be fixed with a black permanent marker. One of the extenders I bought had a scratch on it. I used them to build a keyboard holder for an indoor bike trainer, even though I felt like I could damage the parts or screws, because they are so easy to damage.
👤I like this bar. It took several attempts to get it secured. The nylon that comes with it is smooth and will slip even if you tighten the screws. I used a piece of bike tire tube between the spacer and double stick tape after reading other reviews. I wrapped the handle bar with double stick tape and covered it with rubber tubing. You can build it up to fit your handlebars. You can get a really good grip if you put the tape between the layers and the tubing is soft. Each layer is kept from slipping. It doesn't slip at all now. The bar raises my headlights higher so I get a better angle and illumination, and my phone is higher up so I can see it without leaning over.
👤This is a well-made extender. I have a rad power city e-bike and it fits the handlebars. I don't need the hard plastic spacers that come with it because they should be a softer rubber. I used black electrical tape to make a hole. You just tighten the fitting and don't try to loosen them. I use the extender to hold two lights as the handlebars on an e-bike can get pretty busy with all the controls, a mirror, and a phone holder. It does a good job.
👤It's perfect on the Sunday Drifter 7 handlebars. The strips are used without the smaller ones. It was tight on the bars using large spacers. It's easy to adjust where the top bar stays since the brackets still sit outside. I'm really happy with this. I only needed a small patch of inner-tube to fit the top bar into the top half of the brackets. The old T6-Cree light came with two rubber rings, not the newer oblong ones with the tab on one end. There is a small patch of tape on the top bar that is not going all the way around and to the underside. It works great, it won't scratch the rubber band. Light stays where I put it with ability to adjust both places, where brackets fit around the handlebars, and the light itself seems to allow fine adjustment, as it is mounted.
It's suitable for most road bike, mountain bike, track bike, BMX, etc. The stem is only suitable for 25.4mm handlebars. It is adjusted. The product equip with 5 gaskets can increase the height up to 100mm, it can adjust the gasket to fit your need freely, reducing the pressure of waist effectively. The bike handlebar riser is made of aluminum and has a polished finish. It's widely comparable. Don't worry about buying a bike accessory that isn't compatible with your bike. Their bike fork stem extension is suitable for most bikes. Easy installation. You can connect the original front fork stem extender. Light weight and flexibility make it easier to force when climbing. It is hard to loose the handlebar extender. Work on mountain bikes, road bikes, and BMX.
👤The handlebars of my bike were lower than my bike seat. If I rode the bike as a road bike, I would have hybrid tires for off-road biking. The Zukka extender was easy to install, using up all 5 included rings and the 3 that came with my bike. All fit perfectly. Make sure you use an Allen key to tighten things up. The perfect ride resulted in no back pain from straining my arms and upper body.
👤I can sit upright on my bike. Solid construction. The pinch bolts of the riser and stem need to be snug to be able to move. Align everything and hold while you tighten the top bolt to eliminate any play in the headset bearings. The inside of the riser has bottomed out on the top of the steering tube, so if you find it is taking excessive Torque to eliminate this play, it's because the inside of the riser has bottomed out on the top of the steering tube. Put a short spacer under the riser.
👤I'm a big guy with 220 lbs and found myself hunched over when riding. The stem extender brought my handle bars up so I can ride in a better position and it looks great.
👤The expectations were met. Good length. If you don't use the full length, the excess will stick up from the handlebars, which is a possible safety issue. First you have to figure out what riser length you need, then you have to buy it.
👤It was a noticeable difference on the first day. I had groin, back, and next pain after riding so far forward. A guy with a bike. I also want to give up my bike. Win! It's easy to install. Looks great! I'm hoping this less than$15 item will make me happy after biking days. The game is changing now! Simple concept is great.
👤I was able to ride my new mountain bike with less pressure on my hands and wrists, because the handlebars were raised with this extender. LA gave a tip on excessive play in the front fork from the riser extender bottoming out on the top of the steering tube after its initial installation. LA's tip was to place a second spacer on the steering tube below the riser extender to raise it slightly and then tighten it down to eliminate the play in the front fork.
👤The bike handle was made higher by this extender. I'm happy my husband found it. We ordered one for our daughter's bike as well. It was easy to install. It's much more comfortable to ride a bike now. You'll be fine ordering this extender.
👤Lifted my handlebars. I'm really pleased with this purchase because I was sitting for a long time. Sturdy metal, and fit my bike well. The bikes brand is Specialized.
Bicycle handlebars extension products from Azarxis. In this article about bicycle handlebars extension you can see why people choose the product. Triwonder and Kbrotech are also good brands to look for when you are finding bicycle handlebars extension.
Azarxis, Triwonder and Kbrotech are some of the best brands that chosen by people for bicycle handlebars extension. Find the detail in this article. Zxiranyun, Yeson and Yizhet are also brands that their products are worth to check.