Please make sure to measure and confirm the diameter that you actually need before ordering. Thank you. The mountain bike handlebar is made of aluminum. Their bicycle handlebars are of the highest quality, non-slip and comfortable, making them an excellent ride. The lightest and strongest products are the best choice for your ride. The design of the wire crimping grooves, the standard pipe diameter, and the Exquisite shape of the bicycle handlebar are all unique. The bicycle handlebar used to relax under a good road conditions. Enjoy the ride and the view. The bike handlebar can be used for many types of bikes. It's easy to install, complete set and use immediately.
👤Couldn't be happier with the purchase of a drop-bar conversion. Everything was easy to install. Mikey likes it.
👤Exactly what I was looking for. If you want to cut it to a custom size, there are marks on either end. To get the dimensions that I needed, I cut 1/2 from each side.
👤The bar was light and sturdy.
👤The handle bar has been great. It was the perfect length for my mountain bike.
👤It was perfect for my needs. My old bike was converted into a flat-bar commuter. It has lines for cutting it down. The price was great and the quality was better than I expected.
👤The handlebars are very strong and support my weight.
👤Light and cheap. I installed them and there were no marks from the sliding into place. Happy with the purchase.
The country of origin is the United States. The material is aluminum alloy. The length is 700mm/ 27.55 inch. Extra long allows for more space to install accessories. The bar end has a diameter of 22.2mm. The Riser is 50m. Normally, it takes 7 to 15 business days to ship from China if the order is full filled by Abuyamoy. It will be very fast if it's fullfilled by Amazon.
👤These bars are an upgrade from the stock steel bars. The rise and width make my position more comfortable. I am not laying so far forward anymore. It's much lighter than steel. The bar is made of solid wood with a high quality finish.
👤I bought this handlebar because it was advertised as having a 50mm rise. I looked at the measurements after I received the handlebar and noticed that it didn't look like a 50mm rise. The 50mm rise is obtained by measuring the bar from the bottom of the bar to the top side of the raised portion instead of measuring to the bottom side of the raised portion as many manufactures do. The bar has a 30mm rise when measured to the bottom side. I didn't notice the difference until I received the bar, but they show in the photo's on the product page where their measurements are taken. The bar is light and good looking, so you will be satisfied if it is the height you want.
👤The angle of sweep back was not disappointing. The rise is almost wiped out by the sweep on these. You can see the change in angle against the bar. The grip angle may be affected by this. I will update later on how he feels.
👤Excellent riser upgrade. I like the BMX feel to them. Hopefully they hold up. They are made of aluminum.
👤The item was described exactly. There is a I can't ride a stock mountain bike because of neck and forearm nerve issues. The first thing I did when I bought a new bike was install a stem riser. It was almost enough but I needed a bit more height. There is a It was well worth the purchase after 20 miles of mountain-biking with no pain orumbness. The bar ends are marked with several lengths, so if you wanted to shorten the bar you can do it evenly.
👤The handlebars on my new bike made me bend over too far. The amount of rise provided by the new bar is enough to take the pressure off my lower back. The locking hand grips set off the look and provide great comfort.
👤The bar on my 29er was wide and flat. I wanted both. I looked around a bit and found these bars to be the only ones I want. You can get a decent idea of how they look by taking pictures from different angles. The bars are tilted back a bit, and it seems like it would be perfect for what I wanted. Nice upgrade.
The material of the handlebar is aluminum alloy. The bar ends have a diameter of 22.2mm. It's for mountain bike,road bike and etc. There is an important note. Please make sure to measure and confirm the diameter that you need before ordering. Thank you.
👤They are definitely the best bang for your buck, even if they aren't the best bars you can get. They are light weight, strong and sleek. I can't say for certain how well they hold up on downhill mountain biking, but for commute/road bikes they are absolutely perfect.
👤I wanted to swap out my old set since they got bent by the truck. I knew my old set had the same measurement as the new set. Knowing your bar tube diameter is important. Existing components will attach to that size or less. You can either keep the bar the same or shorten it. There is a The Rise of the bars comes from the middle of the neck. This is also a preference to place your hands in a certain height. I only had these bars for 2 weeks. They're comfortable so far, but nothing to brag about. It was very easy to install. Some basic tools are needed. Each bicycle will have a say in this. There is a The rise on these bars was not as high as it was in the past. That didn't make me change my mind about keeping them. If you need new bars, check my photos for proof. Give them a try.
👤I bought these bars for my son's diamond cobraback 20. I tested them with bunny hops before I gave the bike back to him, and they held my weight up fine, so I'm sure they'll be great for him. The rise is perfect for his setup. He seems to like them as well.
👤It is described. The old bull horn style bars were replaced with the 25.4mm/ 600mm flat bar. It was very nice and well made. I changed the original combo to separate the brake leavers and the shifters to allow for all components. Quality and price are top notch for my use. You will need to buy new caps because the old ones are small. I bought new grips for the bars which came with new caps and they were perfect fit.
👤They are easy to install and don't slide around in the gooseneck. The angle of the bar starts to wear on my wrists after a while, and the steel isn't really sturdy, I can feel some up and down play in the handlebars while riding. For a cheap bike build, they do the job.
👤This was bought to replace the handlebar. I wanted to put myself in a more riding posture. This is a great price for that. It should be strong enough for street and path riding. All my stuff was transferred to new bars without any issues. Everything tightened up well. Good purchase that does the job.
Please contact me if you have a question. As soon as possible, they will help you with the problem. You will get two pairs of bicycle grips for one price. The bicycle grips for handlebars are the same as the ones you bought at the same price. You can change the bike handlebar grips in a variety of colors. High-QUALITY SOFT RUBBER: The bike handlebar grips are made of TPR rubber, which is soft and comfortable. The handle of the bicycle is soft and comfortable, making you or your child feel good in the rain. There are internal dimensions. Bicycle grips length of 120MM is suitable for more than 90% of kids bike grips with a diameter of . These are actually good. Tom replaced those foam ones on another razor after using this for a replacement of a razor scooter handle. It was a perfect fit and it was much more durable. There are tips forNSTALLATION. If you want to lubricate the bike handle grips, you should use soapy water, detergent water or car wax. You can install it quickly. There is an after-sale guarantee. If you have a question about bicycle handlebars, please contact them. They will provide 100% satisfactory service as a new type of seller.
👤I was worried about the quality of the handgrips I found. The grips are working well. If you need to stick them on, the old motorcycling tip is to spray hair spray on the bar and inside the grip and then slide the grips into place. Maybe there's already some hair spray in your house, but other glue types will work.
👤I was able to get it over a 1 inch tube fairly easily. I used a thin coat of light weight oil as a lube. While installing, keep it moving and twisting. It's hard to get it to move again if you stop during the install. Only a 4-star rating is given to the handle grip.
👤It was perfect, cheap and exactly what I needed to replace my handlebars. These are simple and there is no cushion to cushion them so once on the bars they are great. I may get something else down the road, but until we figure out exactly what is needed, these are great. They went on without a problem and only needed a shimmy. Fyi- These were added to a mountain bike.
👤I just wanted little kids hands, and didn't want fancy grips. They will outgrow the bike before the grips wear out. Perfect.
👤The grips I am replacing are a little shorter than the one I had. Be sure to check the length. I contacted the seller and am waiting for an answer. When the seller contacts me, I will update this review.
👤The Texas heat makes it difficult to grip bikes. As I rehabilitate bikes for students at Texas A&M, they are tough on grips as well. The way these grips are constructed makes it easy to trim them to the size you want. One end is solid and no worries about having to insert a bar end.
👤If you are half serious about riding, you should spend more and get better grips. These are cheap. The price is correct, but these are not. They slip and turn, offer no grip, and feel dangerous at times. I tried to put something in the grips to make them stay, but it was not effective. After a few weeks of riding with these, I am spending more money for nicer grips and they are going in the trash.
👤The grips are easy to install and comfortable. They are easy to install and look good, but they turn white in the presence of water. It goes away when they are dry. The price point is a pretty good value.
The easy installation includes a backing with edges that are easy to install. Soft and comfortable, shock absorbing base material creates cushion and added comfort during long rides while remaining smooth to the touch. The bar surface is light and flexible. The Wear Resistant is designed for comfort and performance without sacrificing durability or steering. Easy installation with perfect amount of stretch and adhesive backing and includes handlebar end plugs and finishing tape. There are many color choices to match any bike color.
👤The strip is sucks so it might as well be useless. It is not sticky. I tried to stick it to my friend Sticky Ricky who is very sticky, but it did not stick to him. Not at all. Let's talk about cork. If you haven't seen the smash hit Corky Romano, it's because you were 12 years old in 2001 and it was a PG-13 movie. If something calls itself cork, it should be made of cork. I can tell you, dear reader, that the MARQUE Cork Handlebar tape does not contain a trace of poison. I had my handlebars tested by a crime scientist at the FBI headquarters in Washington and as you will soon read in my Washington Post whistle blower article, there was no cork. None at all. How dare you? How dare you steal from the good people of southwest Europe and northwest Africa? How dare you steal from Ricky? Sir, I want you to resign. You should close your Amazon store. Disappear. Start fresh in Alaska.
👤I wrap my bikes in bike tape. This beauty is wrapped around my hiking pole. It is metal and sectional with survival gadgets hiding in every section. I have the most comfortable and beautiful pole in my hiking club because of the tape wrapped around each section tightly and the bare metal was a bit harsh on the hands. I use the same tape for wrapping my backpack straps and it makes them ultra comfortable and doesn't hurt my neck or shoulder. Everything is wrapped with this tape. Where is the dog?
👤grip tape with cork is something I like. It has a soft grip and a pleasant cushion. I have used it before and found it to be durable. The product exceeded my expectations because they included a couple bonus items. The hood doesn't cover the area where the brake meets the bar. The finishing tape is too wide and looks plastic, which is my least favorite part of the package. Each side of your bar has a section of cork tape. I recommend wrapping the band so that at least 85% of the band hits the bar and at least 10% overlaps the previous wrap. That should yield little left-over grip material, which is your goal, because you overlapped the cork tape just right. It is important that you don't stretch cork-based tape because it has no strength. I think the extra pieces are to protect the under-hood area. They don't want you to do fancy tape stretching near the brakes.
The right amount of suspension travel is the right amount of vertical compliance without sacrificing stability or steering. The stem is as rigid as a standard stem, allowing you to sprint or climb out of the saddle with confidence. The swappable elastomers let you dial in the right feel and stiffness. Money-back guarantee for 90 days. They offer a 90-Day Money- Back Guarantee to make sure you are happy with your purchase. If you want to stop using the product, they will give you a refund. The quality construction is made of aluminum alloy. There is a 25.4mm diameter, a 620mm width, 10mm back sweep and a 100mm rise.
👤The bars were too low. I am very happy that I got these. The fit and finish were great. I used them on my hybrid mountain bike to get exercise. I can't say how they hold up because I don't do mountains. I am afraid.
👤I love these handlebars. Strong and very comfortable. They look really cool with glossy BW logo and textured black paint. I used a Wake stem with these. I had a sore numb hand.
👤My handlebars were straight. I had a lot of pain between shoulder blades after a couple of hours. These are connected to the internet. The taller and slightly curved is further back. Installation was easy, the price was good, and the delivery was quick. Used for the first time last week and it was a big improvement. Thanks!
👤This handlebar was perfect for me as I get older. I had to raise my controls to make my bike more comfortable to ride. The bar gave me 100mm of rise. My old mountainbike is getting a new lease on life. The dimensions of the bar were described.
👤It was installed on the bike. The left side has a hand grip. I just fit everything on the straight part of the handlebars. The assembly had to be pushed onto the handlebars. It was all on it, but it was forced some. Theght side has the same thing. I wouldn't have worked if I had less straight part. It would have been perfect if there was an extra 1/2 inch of straight piping.
👤I bought a beach cruiser to ride on the south Padre Island beach. The handlebars were too wide for me. I bought a seat post and handlebars. The feel of the bike was changed to a mountain bike. I tried to match the rise of my hybrid bike. It feels better now. There is a The bars are light and the change in the ride is inexpensive.
👤The Giant 26” mountain bike is 20 years old. It was necessary to have more handle bar height for comfort. The rise was 100mm. It was an easy install. I had to buy a longer front brake cable.
👤I use it on a street mountain bike to raise my riding position and decrease the extension stress on my neck, and it works great. It's light, comfortable and strong. There is a There is not much room on the flat part of the handlebar for mounting accessories, so if you have a lot of devices, you need to get an extender.
The width is 27 and the length is 27.5.
👤The Sunlite MTB 3.5" rise handlebars made a difference in my wrists. I used it today after installing it. The bar is a bit wider which helped with my shoulders. My grip feels more natural and it doesn't feel like the bar is eating my wrists as compared to the original bar that came on my Mongoose Mack MTB. I can ride longer without hurting. It's worth the money to change over to the Sunlite handlebars. The bars were easy to install. The handlebars are of great quality. The handlebars look like they came on the bike. If you need that little extra reach, I highly recommend these.
👤The handlebar is awesome! It's great! I wish I had the money at the time to replace my previous Handlebar, which was a flat one from Huffy, but I didn't have that at the time. I am very happy with it. I don't want to look like a camel because of the back problems that come with slouching forward a lot as you get older. The stem of my old handlebars was too short for me, and the new 5" rise handlebar was just as short. There is a I decided to look for something better. I was looking for a new quill stem and extension when I was shopping for handlebars. I realized 2 inches more made sense after a lot of back and forth, as my riding is more of just commute and excercising, and I wanted to be more comfortable. This bike works for my needs for now, but I may look at getting a used beginners Cannondale, Trek, Specialized or Giant bicycle, or at least an aluminum frame and fork, and I'd say that's a good idea. I went with a stem that had an additional 4 inches and that made a huge difference along with the 5 inch raised handlebar. My Huffy is a commuter bike, not a race bike like a trek, Giant or Specialized, and the flat handlebar is a race type. The raised handlebar did what I needed it to do. My bike will be more comfortable to ride now. I've ridden my bike a few times. I have never been more comfortable. I know my bike isn't made for true mountain biking, but it's not intended for racing, and the old handlebar wasn't great for my arm length. The bike is fun and easy to commute on. This bike looks like it came from a custom store.
The application is for something. The handlebar can be used for mountain bikes. The hexagonal bartape wrap has a silicone textured surface for better grip and control. The shock absorbing base material creates a cushion and adds comfort during long bicycle rides. The bar tape surface is light and flexible. WEAR RESISTANT is designed for comfort and performance without sacrificing durability or steering, perfect for road bikes or any discipline of cycling with a drop bar. The easy installation includes a backing with edges that are easy to install.
👤The bar tape is easy to wrap and has a certain amount of flex so I can give it a tight wrap. The fabric material is very comfortable and has a nice grip on it.
👤I bought this to rewrap my aero bars because they were worn out. I rode with them in a race. After a few miles in the Texas heat, I couldn't hold on to these grips. My hands were moving forward. If you wear gloves, these might work better, but I took them off when I came home. I don't like leaving negative reviews, but I would recommend avoiding them.
👤I decided to finish my bike with bar tape. I have never before installed handlebar tape. I thought the pattern and finish of the bike tape would hide dirt better than a solid white bar tape. This was a good purchase. There is a The length of each roll of the Marque tape is about 8 to 12 inches longer than other brands I was looking at. This allows you to either cut a piece for your shifters or have more than enough to wrap in the traditional figure-8 over the levers. I had plenty to wrap a 44" full-size (not compact drops) handlebar with Aero profile on the tops without internal cable routing. The roll is very compliant and will stretch a bit more than a tacky tape. It is durable and didn't feel like it would tear even when I was pulling on it. The tape has a strip of tape that is not very sticky and that can be a good thing. You can easily pull it off. I almost completed one side and noticed a bar at the start that I re-wrap and have no problems with. The overlap was helped by the shape pattern. The extra length helps you not worry that you will run out of tape before you get the whole bar taped. If you don't have internal cables, you can use electrical tape to wrap your brake and shift cables. It will hold the cables in place and give you an idea of what the finished product will look like as well as give the tapes backing a slightly better purchase to the bars. The bars seem to be wearing well and look good. Silca tape is a very good product and my previous tape was all-white. It was all white and showed dirt immediately. The dark parts of the tape will hide it better. I wipe it with a Clorox wipe and it seems to remove dirt as well. The tape feels like it is making noise, but it is not. I like the pattern and give the bike a white color. I thought the hexagon pattern would make it more obvious on the edges, but they seem to line up pretty well. Cost: The cost of a premium handlebar tape is more than a third. I don't know much about the long-termDurability of this tape, but it seems like a good value. There is a The price is so low that it is not really a problem. Silca is one of the best handlebar tapes on the market with its premium accessories: Metal compression bar end caps and the best finishing tape. The bar end caps from Marque are an extra expense. I used my previous caps again. The finishing tape is okay. I would first finish with electrical tape and then add the finishing tape as a final touch, but it wouldn't hold as tightly as electrical tape, and it isn't as stretchy as electrical tape. I found this tape to be a great purchase, and it was at a really good price. It's a great way to change the look of your bike. I think I'll get the black version next to my bike.
The WAKE bike handlebar is big and stable and made of aluminum, which makes it lighter and better looking. The weight of it is 436g, which is very light in such a large size. The roof and light weight. Excellent shockproof and firmness. Light weight and sophisticated design will make you feel good. Can keep a comfortable ride for a long time. This experience has been updated. The bike handlebar is very long and works well for men. Best for bikers who need more control. The WAKE bike handlebar replacement is a great upgrade. The design: The bicycle handlebars are made of aluminum and are designed to relax on long-distance cycling. Enjoy cycling. The application is for something. The handlebar can be used for mountain bikes.
👤The bike fell off my car on the highway and destroyed the handlebar, so I replaced it with this one. My shoulders feel better after riding with the riser bar and the bike feels more stable with the longer handlebars. If you're changing the diameter of the stock handlebars, you will need a new handlebar stem. Picked up a new one and some new grips to match the new handlebar and my bike feels even better than new.
👤I bought a second pair of bars for my bike, so I decided to leave a review on them. There is a Since I am riding a larger bike, I decided to run 780mm instead of 740s to see how I like them. The look of my giant trance has been completely changed. They feel great! This is my second pair and they are an amazing buy for the price. Sturdy and lightweight! I think these have more sweep than my other pair. It may be the extra length that makes it seem that way. If you are looking for a cheap bar, this is the one to buy.
👤The bars are nice. I mounted them with a Fomtor 60mm aluminum stem and Fifty-fifty double locking grips. The steel bars on my Schwinn 29er were very narrow and skinny. It feels like a completely different bike because of the 780mm bars. I will update the review if there are any issues.
👤If I hadn't heard the bars in the box, I would have thought it was empty, and I will update when I ride them. Buy a wake stem to use with it.
👤I bought these to convert my vintage mountain bike into a modern bar setup. You wouldn't catch me dead on a legit mountain bike trail with these. These things are light, cheap and would most likely snap given the amount of stress placed on them. Is there bike paths? These will be fine. If you intend to go fast enough with these, I would avoid them. Don't even think about getting a little air time. They got two stars from me because they will work for me.
👤It was great for a little while but then I snapped and dropped off a 4 stair, luckily I made it out without injury, but it's frightening to think that it could've happened on a 6ft huck or a 15 ft gap jump. I was happy to make it out, but the build quality on the bars was disappointing.
Sunlt Touring Elson Roadster Stl. Bk. The aluminum alloy is black. Sturdy for use. The design offers a comfortable riding experience. M design is more vintage. It's suitable for long distance cycling. The universal fit is suitable for most kinds of bikes, such as road bike, mountain bike, fixed gear bike. SIZE: Length: 650mm x Diameter: 31.8mm Weight: 0.8 lbs Before ordering, please make sure the handle bar is compatible with your bike.
👤The bars are around 100mm to 80mm in height. They are being used on a pair of bikes. The bars they came with were flat. The 650mm versions were purchased by us. They are ideal for road work. These are not your bars if you want to go down a mountain trail like your hair is on fire. I think they are narrow, but not overly narrow. If you're looking for some comfort, you should try these out. There is a My wife loves a fully stocked handlebar. She would like to have a water bottle holder, a bar bag, and perhaps another couple bells if she could get them. She declared it "good enough" because the choices are limited, but at least the toy made the cut. I am fine with my bike. My wife runs the bars a little more forward so that the bar bend is inline with the steering stem. The sweep needs to be aligned with our wrists. The neutral sweep is something I feel very confident in. They aren't swept or straight.
👤The design of this handlebar is a perfect replacement for the straight mountain bike handlebars that came with my e-bike. The accessory covered the blemish on the bar, so it did not return. If the quality control issue is not addressed, it would be 5 stars. I am sure the blemish was not caused by shipping.
👤The goal was achieved when the bars were brought up and back. Installation was easy until the left side controls were mounted, there was a noticeable out for round area. I was able to use tools that most couldn't because I had access to them. Everything went well after the fix and painting. I would recommend looking for a better set of bars.
👤It's perfect for taller people who don't like leaning down on the handlebars.
👤A great shape. It was plain and sleek. The rise was perfect for my posture. I am more comfortable now. These are the same strength as the original wide flat bars. We are also a 31.8mm in this shape.
👤The bars were raised on the mountain bike. Perrrfect!
👤I am really happy with this purchase. It seems to have a tough finish. I had to take the bar and brakes off several times to figure out how much to cut off to fit my daughter's hot rock. The cross over bar is nice.
There is an important note. Please make sure to measure and confirm the diameter that you need before ordering. Thank you. The Sunlite D-Cruiser Hi-Rise Riser Handlebar has a 25in rise and a 32in width.
👤I love it! It was so comfortable on my car. Got a new quill stem and four bolts. It's a must to keep them in place. Make sure you check for proper stem size, just pull an old one and there is a stamp on the base gray piece. It's usually either 22.2 or 21.1, but sometimes it's 21.2, some nicks in the paint, but overall condition is great. I love these.
👤Awesome bars. The quality is good for the price. The bars sit high, which creates a good amount of Torque leverage when gripping them. The seat on my bike was not strong enough. Most beach cruisers come with two or even one bolt, but they will probably need a stem with four bolts. I'm waiting for my four bolt stem to arrive. I need to update this after that application. It's important. There is a good variety of four bolts on Amazon.
👤That's right. Duuuuude. I love the mofos more than the bike. I saw these bars after I had some ape hangers. Never looked back. The style cohesive was made easier by them. A must have for cruisin on the beach. Just get it and forget about it. There was a boom.
👤I bought these handlebars for my bike. Absolutely love them and would recommend them to anyone. It was easy to use. It was comfortable on your arms. It's easy to install. Last week, I bought a 3 wheel bike. I will be buying another set for my bike.
👤These are fun and look great. People complement me when I go on my bike. I was hesitant to go that high because I was afraid my arms would get tired. It is a very comfortable ride. If you have a cheaper bike with the one screw system, you will have to upgrade to a 4 screw mount to keep them from moving. They will be a bit beacuse of how tall they are. I was able to get one for under 20 off line.
👤6'3” It makes my bike fit me perfectly, and the odds are you will have to adjust the handle bars to make them fit. I thought they would be crazy high. There is actually pretty functional.
👤I need a new stem to fit them, so make sure you check the specifications. From a $60 investment, we are going to be in the 90's.
Bicycle handlebars black products from Mightyduty. In this article about bicycle handlebars black you can see why people choose the product. Upanbike and Upanbike are also good brands to look for when you are finding bicycle handlebars black.
Mightyduty, Upanbike and Upanbike are some of the best brands that chosen by people for bicycle handlebars black. Find the detail in this article. Chunzexi, Marque and Bw are also brands that their products are worth to check.