Best Bicycle Grips for Handlebars with Twist Gear Shifter

Handlebars 17 Aug 2022 10+ Comments Open

1. BW USA Short Twist Grips

BW USA Short Twist Grips

The weight of the front and rear shifters is 120g. Money-back guarantee for 90 days. They offer a 90-Day Money- Back Guarantee to make sure you are happy with your purchase. If you want to stop using the product, they will give you a refund. The 90mm width is compatible with Sram Grip Shift, and other twist style shifters. The built-in end cap prevents the handlebar from being damaged in an accident and the durable rubber construction maximizes the lifespan of the grip surface. It works with any standard 22mm bike handlebar.

Brand: Bw Usa

👤Kids tear their grips up pretty easily during crashes. The replacements were easy to install and the colors matched the bikes accents, which my kid wanted. It's perfect for twist shifters. Adding a little flair to the price is a great addition. Don't expose any metal, just buy new grips.

👤The color of the grips completely faded when I got them less than a week ago. They look like they have been in the sun for a long time. I need to buy new ones from a different manufacturer. They have a 90 day money back guarantee. I don't know how to get in touch with them.

👤I replaced my bike's twist and trigger shifters. b/c I don't like twist shifters. The bike had short grips that I hated. I ordered them. They feel good in the hands.

👤It's comfortable and it looks good. They were great for a while, but after about six months of riding, one of them split. I expected it to last longer because of my infrequent use and the fact that the bike was stored indoors.

👤I was looking for a short grip to work with. These aren't going to blow anyones mind, but if you're looking for simple, comfortable, minimalist grips, these are perfect.

👤I put them on my girlfriend's bike. The looked great and felt good on her hands, but after a short time in the sun, they are fading. They fit her color scheme so well, now they look like they are old. Still working though.

👤My kids had a gripshift side grip. The fit was long but easy to trim with a box cutter. Would buy again.

👤They are smaller than the measurement, but they work great with the gearshift. I needed a bigger one for the other side of the handlebars.

2. Microshift Bicycle Shifters Compatible Shimano

Microshift Bicycle Shifters Compatible Shimano

It is easy to adjust the angle between mudguard and bike tire, no repair tools are required, and it is easy to install and remove. Cassette Compatibility 7 Speed.

Brand: Microshift

👤As a parent of three, I've had the pleasure of dealing with the terrible 7sp revo shifters that every store brand bike comes with, and I have trouble with them as an adult and 6 year old, but they're easy to use. It's not possible to play with little thumbs with small strength and the need for wider grips. I have a couple sets of their more expensive road shifters and have always liked them, so I tried these on a lark. These exceeded expectations. There is a The bike was easy to turn and the neighbor's 8yo who borrows the bike from time to time had no trouble with it. The shift was easy to turn and the shifting was precise and easy to tune up.

👤The front derailleur was replaced with a new left grip shifter. It took too much force to turn the grip shift. The shifter is fine. I ran the new cable between the pinch bolt and the arm that held it to the derailleur. The cable was supposed to go behind the little ear before it went downward. The grip shift is easier to turn when the cable is installed correctly. Don't try to force the shift to turn because you could break a plastic part inside. The picture shows a spare parts bike with a little ear to the right of a pinch bolt and a cable behind it. The new grips are as good as the old ones. The next 21 speed mtb has the FD-TY30 and RD-TX31 on it. When your hands are wet, it's hard to turn these shifters. I would like them to be square rather than round.

👤The rear derailleur cable was torn back into the cable housing as I was resurrecting a 2003 GT Palomar. If you could find a single cable, it would sell for as much as a 6 or 10 pack, which I didn't want or need. There is a Out of frustration, I searched for shifters and found them. For a few dollars more than a bunch of cables I didn't need, you can get replacement shifters. Done deal. If the shifters didn't work, I'd use the cables that came with my old ones. There is a The bike had a stock set up. The first photo shows these are almost the same. The mounting is the same as the body. The rubber has a different pattern and is softer. I think they are a little better as they twist easier, but still "snappy". It took 45 minutes to replace both the shifters and dial in the derailleurs, take a test ride, and take a photo of the end result. Unless the cables fail early, these are 5 stars for me. Multiple gear changes are easier and smoother than they have ever been with the drive train dialed in. I compared the Microshifts to the same type of shift on the same drive. There is a The Microshift has a "snappy" sound and feel when you shift, while the Revoshift has a more refined feel. Both are easy to shift the three speed chain rings and smoothly shift individual gears with a click. The Microshift feels like it requires less wrist movement to go from one shift to another. I think you'll be happy with either Microshift or Revoshift, depending on how you use your bicycle. There is a I would put the Microshift on a bicycle that spends more time on trails, as the shifting seems quicker and with their sharp clicks, they never accidentally up-shifted into a lower gear like the Revoshift did, while changing my hand position. They also seem to be simpler to service and do not have a shift indicator window that can be damaged while on a trail. I have some suggestions for people that are considering these. There are negative reviews about these not shifting the gears. You can search for "bicycle derailleur adjustment". An excellent video by Park Tool should explain how to set the shifting index. I didn't know how indexed shifting worked when I was younger, because we just pulled the cables tight on multi speed bikes and felt for gears. I understand and the GT. When it was new, I resurrected shifts better. Do a search for your current brand of gear. Some brands may be incompatible with the index. I was going to spend more to replace my SRAM with a different type, but it was incompatible with the GT's derailleurs. To get your hand grip from the bar, use a small screwdriver or allen wrench to lightly pry the bar from the hand grip. Remove the screwdriver or allen wrench, twist the grip and it will slide off easily. Installation of the grips is easy if you rub alcohol on the bars. Use a de-greaser to clean the derailleurs. After allowing them to dry thoroughly, lubricate the pivot points and work it in, I used a little synthetic grease on the jockey wheel bushings. You'd be amazed at how smooth they are. I had to reset the L and H settings because mine loosened up so much. Unless you know how to solder, order some cable crimp ends. If you don't cover or solder the end of the cable after you cut it, it will eventually break and you will have excess cable. If you want to upgrade to a Schwinn kit for like $10, you can get new cable housing, which will give you cables and housings for both the shift and brakes, as well as the plastic lined housings. If you have a set of metric allen wrenches and a small phillips head screw driver on hand, you're all you need to do the job.

3. Bicycle Shifter LITEONE Indicator Moutain

Bicycle Shifter LITEONE Indicator Moutain

You can only use the left and right gear shifters for 3 speed and 7 speed. The optical gear display indicator has wires that are noise-dampening and offer precise and consistent shifting performance. The gear position is shown with the optical gear display indicator. The Trigger type handle is used for the right shift, with one lever for down-shifts and a thumb button for up-shifts. Triple crankset lever is a left shift. The ergonomics design is compatible with liner-pull, cantilever, roller, and mechanical disc brakes. The Thumb gear shifter is made of high quality material and works perfectly for optimum performance and safety. The Thumb gear shifter is made of high quality material and works perfectly for optimum performance and safety.

Brand: Liteone

👤It is a good value for its money. It does not shift well to 3rd gear. I don't know if it's the way I set it up. It doesn't shift well. Water can get into the shifter, it looks good. You can see the fogged up little lens when it rains here. The release lever on the shifter stopped working. I couldn't shift back down to 2nd or 1st because it would get stuck on gear you moved it too. I wanted to see what would happen if it was replaced with another pair. I won't recommend it if it breaks again.

👤The shift seems to work. The left one was scratched and some paint was gone. The package was sealed and the two pieces were wrapped separately so I assume the scratches were created during manufacturing. Not a sign of good quality control. I was too lazy to return it.

👤I like the quality of the shifters. The front brake cable was too short. Many of us have front disc brakes and it was designed for that. I had to re-use my old cable. The brake assembly should be about a foot longer. Do not cut your cable too short. I did not receive any cable end crimps.

👤This is a cheap ripoff of the shimano shifter, but it doesn't shift into 3rd gear.

👤It's easy to install. Works well. Leaving the old brake cables in place is a good way to install brakes. The wire will come out if the screw on the old brake handle is adjusted. The wire should be inserted into the brake handle.

👤The replacement product for the cheap junk that was installed on my bike works perfectly.

👤If you know what you're doing, everything will work. The only bad thing about the left shift is it's lazy on the cable tension. I have an older bike that has a huge 3rd sprocket. It's great for anything.

4. SRAM 07A Comp Twister Rear

SRAM 07A Comp Twister Rear

The design is more space-saving. The ratio is 1: for light and precise index. Twist is shifting at its best and highest performance. The package has the fastest front and rear shifts.

Brand: Sram

👤It was very easy to install. I was trying to swap out a shift on my child's 7-speed. The grip shift unit is unable to lock in on the full range of middle gears because the cassette spacing is too close. It turns out that the derailleur is looking for a different amount of cable movement. Microshift makes a style that should work.

👤The fact that the shift worked in the opposite direction from the original one wasn't an issue. I had a problem with the index because it would skip multiple gears when shifting, especially towards the upper gears. I found a different shift for my derailleur.

👤My wife's Trek Sole Rider 100 bicycle was used. The rubber had deteriorated to the point where it would leave a black gunk on your hands. The installation was easy. It would be nice if it came with a cable cap. Otherwise it works perfectly. I was disappointed that it took so long to replace it.

👤I replaced the old grip shift with this because it failed to tinker with an old grip shift. This has been a great shift. The cable is pre-installed for the rear derailleur. If you get it right, one click, you'll have one gear shift. Shipping was on time. A breeze is being installed. Function has been perfect so far. If I could step back in time, I would not have to tinker with the grip shift anymore.

👤I went with a thumb gear switch. My son would pull on the grips and the gears would change. Don't use a thumb switch.

👤It is not compatible with Shimano. Couldn't get it to shift into the highest gear. Customer service is excellent.

👤It was difficult to shift the bike without missing gears. The new unit works great. I didn't expect much from this item but I should have gone for a higher cost unit since it's a low cost item.

👤It's easy to install a direct replacement.

👤It's much easier than a paddle shift. The twist grip spreads the load onto several joints rather than just my thumb. It was a direct replacement for the Sram paddle shifter, and the new cable makes installation easy.

👤The plastic is supposed to have a hole in it, but it looks like a form problem.

👤Un mando is sensible. Sincroniza perfecto con unos pocos ajustes. Muy sencillo de instalar. Los acabados son. There is a No le veo contras. It is recomendable.

5. TRELC Antislip Handlebar Protector Mountain

TRELC Antislip Handlebar Protector Mountain

PRUNUS bike grips fit any regular handlebar. It's easier to install the bike handlebars if you apply some soap to them. TPR rubber material is soft and comfortable, which can increase the shockproof effect and avoid palm and finger paralysis. The wrist should be supported when holding onto the grip to minimize the fatigue of your hands. It's suitable for long time cycling. It's easy to install. You just slide the bike handlebars onto your bike. There are no other tools needed. Integral Bar Plug The handle grip was upgraded to a bar so that the end caps wouldn't fall out. Dust, rain, and debris can be prevented. fits most handle bar is a requirement for most handle bars, such as BMX, mountain bikes, MTB, scooter, folding bikes, e- bikes, road bikes, commuter bicycle etc.

Brand: Trelc

👤These handlebars have been used by me for 3 years. They are shock absorbent. The grips melt off into a paste when stored outdoors, so use these with a bike cover to preserve quality. Attaching a video showing how to swap out the handlebars. Use the bike hose. It will take a long time to get them on. Hope this helps you! This product is recommended. The bike shop sold me my original pair, and I was happy to see the same ones here on AMZ.

👤I have them on all my bikes. The price is very nice. It's a good idea to use electric tape on your metal handle bar. There is a They will stay in place for a long time.

👤I bought this item for my wife's bike because of the great reviews. It didn't live up to its ratings. The grips are sliding out. My wife is only 5 feet 2 inches tall and Petite so she is not strong. She has a regular Trek mountain bike, it's not weird in size that would have caused the grips to not hold in place. We have only used her mountain bike on paved roads, so there is no mountain terrain that would have required holding on to dear life. There is a The caps fall off easily. Ours fell off when we bumped into something. I knew that the chance of losing these end caps was very high when I put it back on. When you buy a new product, you want to have a good feeling. I am fed up with having to push the grips back in position after a few rides. I'm looking for replacement grips that will lock in place, what I should have done in the first place. I thought I'd warn others before I start shopping again.

👤I have had these for 3 years to replace the grips that broke. I was worried that I would lose the endcaps when I installed these. I was correct. I use my bicycle to commute. The endcaps came loose. They came off after I glue them back together. The handle bars made it difficult for me to hold them. I had to keep turning them back. They weren't very stable on some of my rides. I wouldn't recommend these grips unless they were locked.

👤These were bought to replace the old ones. I recently bought a Trek 3700 MTB and used Bontrager grips. I didn't want to spend a lot since I'm new to the sport, but I wanted something nice as well. The feel of them is very comfortable and the grip is good for handling. They didn't leave any black marks on my hands like they did with my old ones. Highly recommended. The price paid for the quality was more than I expected. Happy riding!

6. Coolrunner Handlebar Non Slip Mushroom Tricycle

Coolrunner Handlebar Non Slip Mushroom Tricycle

The U.S.CPSC has a safety standard for bicycle helmets. Soft and durable material. The grip is made of high quality TPR rubber which is soft and durable. TheSTANDARD is a size GRIP that is 4.7"/ 120mm in diameter. 0.87" There are millimetres. The handle bar for the low-rider bike is 20-22mm. Coolrunner mushroom grips are designed with a ridged surface which can absorb shock when you are sweating or in the rain. Don't put the bike grips on the handlebars directly because it's easy to break them. If you have an issue with their bicycle handlebars, please feel free to contact them, they will solve them for you within 24 hours.

Brand: Coolrunner

👤I've used a lot of these grips on a lot of bikes. I put a metal washer in the base to make it harder for kids to cut the closed end of the bike. Push the washer down to the base with the back end of a toothbrush. I use a toothbrush to get alcohol out of the grip and onto the bar. After the alcohol is put on the bar, you have to cut the grip to get it back off. The O.D. is perfect every time. Use a blade to slice the grip. It's time to swap out old grips.

👤It's perfect for a kid's bike. They are not hard plastic like rubber. They are easy to cut with a box knife. It's perfect for bikes that have a shorter grip on one side. They were easy to cut. There was no tearing. There is a Before I put them on the bike, I dropped a thick washer into each one. It should help keep the ends of the bike from being ripped out when the bike leans on something. If the handlebars are dragged across the sidewalk, it won't help. The washer doesn't make them strong as carbon fiber, they are still rubber. You can put streamers into the end of the grip with the washer hole in the middle. I have the purple ones. There was a deep purple color. Not weak or faded. I couldn't be happier. It's perfect for a kid's bike. I wouldn't recommend them for an adult bike where you are going to spend a lot of time on it. For an adult bike, get something more comfortable. But a bike for kids? These are perfect.

👤I bought these for a 16' bike and they were easy to install and stay on after use. Handle bar grips are good. The handle bar should not be left out in the sun. The melted rubber is making ours discolored and sticky. The high quality rubber and shock absorbing design made this a 3 star. A bit of a stretch from my experience of having these for a while now.

👤We got them yesterday, so I can't speak to their durability. My kids are hard on bikes and scooters, so I just buy new grips every few months. My daughter liked the hot pink color. These fit perfectly on a 20 inch hot rock. My son installed them using an air compressor, and it took a couple seconds per side. Push the air compressor tip into the grip. The air will push the opposite way that you are sliding the grip, but it works, fast and easy.

👤The blue version of the grip was a lighter blue and a close match for our bike. It was not the same blue. If you want to match the color of your bike, it's best to order black or white. We ordered black after returning it.

👤I found a rusted trike. I will just buy a new one since it was free. These were not as big as the toddler tricycle. I couldn't use them so they are working. A tighter fit would only be needed for higher activity. I kept them and am happy with the price.

7. Microshift Bicycle Shifters Compatible Shimano

Microshift Bicycle Shifters Compatible Shimano

There is a textured pattern on top. Cassette Compatibility 6 Speed. The trip was 3X6. The Twist Shifters are fast.

Brand: Microshift

👤I have had my bike for over a decade. They still worked, but they were turning to something else. I got these to test them out. I have never installed anything like this before. I can't believe how easy it was. It worked. I had to make sure that I was tuning in just like you would. They work well. I noticed the shifters on the name brand bikes at the sporting goods store. Great purchase.

👤I bought this shifter for my hybrid bike. The rubber grips on the original shifters had deteriorated to the point that they had become slick, so they had to be replaced. There is a The shift detents are the biggest complaint I have about the Microshift shifters. The gear change from 2nd to 3rd gear was always the result of a single click on the shifter. There is a One click does not always result in a single gear step. Shifting up from 2nd gear could lead to a switch to 4th gear. The shifts to 1st and 6th gear always occur correctly, so I don't think my derailleur is misadjusted. The steps for 2nd to 5th gear are the same as the steps for the original shift. There is a The shifter works, but it doesn't work right. Microshift should have designed the shifter with better detents.

👤I've bought a 3x7 set for a GT Palomar, a 3x8 set for a friends GT, and the way the shifters have performed, have been better. They've only been installed a few months, so I can't advise on long term durability. I have no regrets. There is a I pulled a relative out of a shed, cleaned and changed their Next Power Climber into a 3x6 set, and figured it would solve the shifting issues the bicycle was having. The installation was easy. A small metric allen wrench and rubbing alcohol are needed to remove the hand grips and install the Microshifts. The adjustment of the falcon derailleurs was an experience. There is a The rear derailleur is relatively easy to adjust. There is a The adjustment on the front derailleur was a different story. It didn't want to shift correctly on the front chain rings even if I did it. I found that if I left some slack in the cable, the bicycle would hit all three chain rings in their indexed position. There is a The bike is hitting all 18 gears better than it was before. Is it good? No. There is a Sometimes you have to let the shift drop back to make sure it's complete. You have to shift between the first and second chain rings to make sure you get a complete shift. Sometimes the front derailleur hangs when you down shift or up shift, because it doesn't snap into place when you down shift or up shift. I think the situation is due to the Falcon front derailleur. Multiple click between chain rings was the original shifter. The Next Power Climber rides like a bike with the Microshift, which is a different bike than the original Falcon Shifters. The installation was done with Top Cabin short grips. There is a If you're not familiar with index shifting, you can search for it on the internet. I didn't have a clue but I learned a lot. I think it helped make this install work. Make sure your front and rear derailleurs are in good shape. Make sure your rear derailleur is straight. Maybe replace your cable housings. Do you know if your derailleur is compatible with the Microshift? I think an upgrade in derailleurs would resolve the minor shifting issues the bike still has, even though I made this combination work on this Next bicycle. I think that the bike's full suspension with a rear swing arm may affect the cable tension on the bike. There is a If you need it, buy cable crimps and new housing. I can't say enough good about the shifters, but they don't come with housing or cable ends.

8. PRUNUS Ergonomic Antislip Handlebar Mountain

PRUNUS Ergonomic Antislip Handlebar Mountain

There are two screws on the handlebars. The two side locking design is stable and durable. Two Allen keys are included. The mountain bike handlebar grips increase the support surface of your hand and relieve pressure from your hands, wrists and elbows on long trips. The bicycle handlebars are made of pure black and grey and classics never fall behind. You just need to put the plug in the handlebar end and slide the bike grips onto your bike. TPR rubber material is soft and cushiony and provides non-slip grip for improved riding safety. PRUNUS bike grips fit any regular handlebar. It's easier to install the bike handlebars if you apply some soap to them.

Brand: Prunus

👤Quality grips, but not soft. Better than stock on a Schwinn. Do not follow their advice. I know better. They don't know anything about bikes. They wanted to use "SOAP and water or oil" to make the grips go on. It is the worst thing you can do as it will make them slip again. They won't be useful as grips. There is a Professionals use alcohol, hair spray, or both to make the bars slippery, as it dries thoroughly and the grips hold fast. I was able to slip these on with brute force twisting back and force, so I didn't need to apply alcohol, which works great. If you're not sure how to install these, check out the instructions on YouTube. Don't use soap or oil.

👤The smaller grips fit well on a bike with two grip shifters. My hands and wrists feel better after long rides compared to the standard grips that came with my bike. I sprayed the bars and grips with a spray of spray before putting them on. There are a lot of useful videos on the internet. It's a great value for a compatible size. Update 5/ 2020. The dark portion on both grips has begun to separate from the light grey portion. These lasted about a year and a half.

👤The 90mm shorter profile grips are perfect for my set up. The grips are open on both ends, which is better if you are using a mirror. If you don't use the right tool to cut a close ended grip, it will look bush league. There is a There are a couple of quick tips. There were small holes on the end of my old grips. I was able to blow the old grip off in about 2 seconds using the air compressor and blow gun I used. It's an old tip for removing golf grips. I used a non-toxic golf grip solvent to install the new grips, and you could also use water based soap. I wouldn't use any petroleum based lubricants because they won't dry and the new grips will stay around for a long time. The wet bar end and the grip solvent are shown. I had it on hand. If you really want to keep these grips locked down, you can use double sided tape and install them like a golf grip. I have put 100 miles on these grips and they are better and thicker. This was a 15 minute project and 10 minutes of fooling around with the mirror removal and replacement. Hope that helps! I'll report back later, but I don't know about "durability" yet. The 130mm grips were installed on another bike.

9. MEGHNA Bicycle Shifter 7 Speed Mountain

MEGHNA Bicycle Shifter 7 Speed Mountain

The Thumb gear shifter is made of high quality material and works perfectly for optimum performance and safety. Any standard straight bicycle or stunt scooter handle bar can be used. For a bicycle shift. The grips are comfortable. Long rides can cause fatigue in your hands, wrists, and elbows. The design is more space-saving.

Brand: Meghna

👤I bought this twist shift to replace my old one. The gear display number is better than the original shifter because it shows the current gear through a small window. The attached cable was too short for my Townie, so I was unable to use it. I would have returned the item, but it was damaged while I tried to install a longer cable. I was not prepared to deal with a shifter that wouldn't allow me to substitute another cable, but it looks like that is the case for almost all of them.

👤A great upgrade for a bike. The quality is a little better. It feels better than the original. It came with new handle bar grips that I liked. I was going to have to replace these too, but it was cheaper to buy this kit. The parts are better than what came on the bike. There is a lot of cable length and it comes with little crimp on cable end caps to keep the cable from unraveling after being cut to length. You will need to reuse the original cable outer sheath if you don't have an outer sheath for cabels.

👤The package comes with both and replacement grips, and I only needed the right-hand shifter assembly. The price and merchandise were very good. It is easy to replace the cable.

👤My son's old bike was left out in the weather and they were perfect for it. I replaced the rusty ones that stayed in one gear so my husband could use the bike. The grips came with them. All in one. After cutting the cable length, I had pinch ends for it. In one kit, perfect all together.

👤The handle grips for a child bike are very small. Shifters work well. This does not come with the tubing. You will need to buy that separately if you have a badly rusted car. You should buy a kit that comes with everything you need.

👤I couldn't believe the price compared to the estimate. It is easy to install with long cable. It was almost plug and play. The grips look like a tricycle, but with a small amount of water they can fit on a Jamis. I can't get over the price.

👤I bought it for my granddaughters mountain bike. They seem to have done the truck.

👤I've purchased a lot of different twist shifters, few were of good quality. I have purchased this one 17 times and it is the only one that is decent quality for the price. I highly recommend it.

10. Allnice Handlebar Comfort 22 2mm Bicycle

Allnice Handlebar Comfort 22 2mm Bicycle

Tools are free to install. Simply slide on the grip and install the plugs. The bike handlebar has a grip. A bicycle handlebar grip insert bike handlebars can make riding more comfortable by soaking up vibration and preventing your hands from hurting. Handlebar grips with ergonomics can fit your palm well, and prevent the wrist from deviating. The rubber material on the surface of the bike handlebar grip is comfortable to use, and it can get a better anti-slipping when you are sweating or in the rain. The rubber is comfortable and non-slip. The size is 22.2mm/ 0.87in. AA is two long handlebars,AB is one long and one short.

Brand: Allnice

👤The grips are very comfortable and replace the factory grip that is gummy from the UV. It is the right type of rubber that provides support and damp vibration from road bumps. The brakes lever has to be moved a quarter in to accommodate the longer grips. inward. The grip can be held in position from rotation. The grips have been 2500 miles since they were installed.

👤These are a great buy if you need a handlbar twist shifter. They are easy to install and hold tight. They aren't leaving once the allen nut is tightened. I have a bike that positions me upright so much of my weight is on the grips. The grips have reduced the amount of pressure numbness I get. There is a My local bike store didn't sell anything comparable and the bike manufacturer charged about 4 times as much as the store was out of stock. I put a mirror in one side again.

👤The grips are nice. The short grip will be used for a throttle on the handlebars to maximize space. The grips are easy to install. It is possible for a sufficient size of grip. The lock on the attachment is very secure to restrict rotation. The end caps cover is adequate. The grips will hold up over time. They have a good design. I recommend. Product quality, value and price are wow factors.

👤I am very happy with the handgrips. I had to sand down some spots because of the mold and excess plastic around the set screw holes, it was a bit sharp and uncomfortable. I used a razorblade to cut off the excess. I threw away my old handgrips because I knew I would never come back. The handgrips are great for the price.

👤You have a 2.5mm wrench, it's easy to install. The shorter grip is important. It seems like a good quality. I took it for a spin and it felt better than the OME grip on my Priority bike.

👤They were perfect except for being slightly longer making me move levers. The screws keep them in place. There are two short and two long bikes with a single twist shifter. I wouldn't have expected it to be.

👤I was hoping that these would make my hands numb. Not true. I tried different positions but nothing helped. It's easy to install, but no better than standard rubbery grips.

11. JooFn Handlebar Lockable 0 87inch Multi Speed

JooFn Handlebar Lockable 0 87inch Multi Speed

The length is 130mm and the short is 90mm. Soft TPR rubber, eco-friendly materials, fine workmanship. It won't go brittle or sticky in long-term use. The length of the longer bar is 130mm, the length of the shorter bar is 90mm, and the diameter is 22.2mm. The grip design is ergonomics. The best grip for riding is offered from the index finger to the thumb. Excellent touch. It is neither soft nor hard and has a distinctive shock-Absorbing effect. It's suitable for mountain BMX folding.

Brand: Joofn

👤Wow. It feels good to have grips that are not moving. I was looking for non-slip grips that would fit a twist shift and these were the only ones I could find. The grey is a bit lighter than the main product picture, but these look and feel fine. The all-black version I was looking for was superior in appearance. It is recommended. These get very sticky. They are covered in glue. Maybe a better material could have been chosen. If you don't wear gloves, you might want to spend more and get something made from a better material.

👤The grips on the handle bar were stripped. There is a I canceled Prime after receiving two bad purchases. I will shop locally because I can see what I am getting before I pay.

👤It does not leave marks in my hands. It stays in place when installed. The palms of my hands are supported by the surface area.

👤The full size fit fine, the short was too long with the twist grip, and had to trim off a bit to get the grip on far enough to lock it on the trek mt60 The price is great and the son likes it.

👤The grip on the right side of the handlebar was shorter than the left. This fit right.

👤Good value. It's easy to install. Looks good on bars.

👤I can not beat the prize if I put on my e-bike.

Summary

What is the best product for bicycle grips for handlebars with twist gear shifter?

Bicycle grips for handlebars with twist gear shifter products from Bw Usa. In this article about bicycle grips for handlebars with twist gear shifter you can see why people choose the product. Microshift and Liteone are also good brands to look for when you are finding bicycle grips for handlebars with twist gear shifter.

What are the best brands for bicycle grips for handlebars with twist gear shifter?

Bw Usa, Microshift and Liteone are some of the best brands that chosen by people for bicycle grips for handlebars with twist gear shifter. Find the detail in this article. Sram, Trelc and Coolrunner are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com