Best Bicycle Garage Hanger Ceiling

Hanger 6 Dec 2022 10+ Comments Open

1. SAZ HOME Heavy Garage Hooks

SAZ HOME Heavy Garage Hooks

6 in. The width is 9.75 in. The high is 3.75 in. deep. SAZ Home's Ceiling hooks are heavy duty for garage storage hooks solution. Extra 6 standard screw hooks are heavy duty for garage wall hooks. The bicycle hooks for ceiling and overhead bike storage hooks are easy to install. Strong and long- lasting garage hooks. Premium quality steel for bicycle hooks is used in the Wheelbarrow ceiling bike rack. Bike hooks are ideal for garage mounting and are coated with a non-slip protective grip. Bike hooks are ideal for garage mounting and are coated with a non-slip protective grip.

Brand: Saz Home

👤It's a good size for hanging my bike in the garage. This saves a lot of space.

👤The covering on the bikes is tearing off. It's not great since it's starting to scratch the wheels.

👤They are what they say they are. If you put too much weight on them they will fail, but the quality of the product is not affected. There are cords, tools, and a bike hanging from these. There were no problems. Is it possible that I would buy them again? Yes.

👤These are used to hang heavy items in a shed. It's easy to hold bikes up.

👤These hooks were installed to hang my mountain bike. It took a long time to do the stud finder correctly. The problem with the gripping/ coating moving around is the same problem that others have reported. I hope they don't fall when I wake up in the morning.

👤It's perfect for hanging bikes around the house.

👤We used these to organize our shed. They did a good job.

👤The hooks come off easily.

2. Dirza Hanger Garage Bicycle Storage

Dirza Hanger Garage Bicycle Storage

If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it. There is space for saving. The bike rack is designed to be hung on the wall to save space. Please mount on the wall. It is easy to fold up when not in use, saving a lot of space in the garage. Anti-scrutch cover. The arm hanger is made of soft rubber to protect against paint damage. STURDY: The bike rack is 3 lbs. The limit is 38 pounds. Large arm holder for bikes. Not for a woman's bike. The solution is perFCt. You can display your bike in any room with a wall mount bike rack.

Brand: Dirza

👤These were bought to hang my bikes. They seem well built and work well. There are two screws on each hanger. You will need a drill and a stud finder. I can't remember what it was.

👤I bought this wall mount to hang my bike out of the way. I was not impressed with the construction, but it worked as advertised and I was happy with it. I decided to purchase another one in order to get my wife's bike out of the way. The second wall mount I received was sagged and leaned forward, making it appear as if the bike was falling and way to heavy for the mount. The issues were resolved quickly after I was contacted by their customer service. The company is enjoyable to work with.

👤I bought my first one a year ago. I ordered another for my Salsa because it worked well and it got crushed by lawn equipment. My only suggestion is that the directions have the right tools for the job.

👤I have a drill set with these but the one sent was too big, reviews said it takes screws, I need a nut driver. I was told I could just screw them into the wall, but I have to get a proper tool. Not good. I put the bike rack up after bringing a nut driver. It's very sturdy and easy to put up.

👤I bought 2 wall mount brackets. After mounting them on the wall, one held up well, the other collapsed under the weight of the bike. The make and model of mountain bike are the same. The mount tube and hooks are bent up from the bike's weight on the metal tab on the mounting brackets. The second hanger does not work. I think quality control is poor.

👤I needed to hang my bike in the garage. This is the way to go. The hook is very well made. The hook lifts up and out of the way when the bike is on the ground. The hook doesn't go against the wall, but it still does what it was made to do and that is to hold your bike. If you use strong molleys and go into a beam you should not have a problem. I used 61lb concrete molleys and no issues at all. I would highly recommend this product.

👤The DIRZA BIKE HANGER works. It keeps the bike in place out of doors, and when I leave Florida, it folds up and saves space. I've been riding bikes for 60 years, but this one is the easiest to install and lift into place. I used a drill to mount the 40 year old STUCCO on the hangar. Worked well.

👤I don't like receiving items that don't match and I rely on the photo. The angle is gentle. This means that the wall brackets are not completely flush to the wall. It seems fine after I attached it. I think the older design is stronger. Can the manufacturer assure consumers that the strength has not been compromised by the design change? I don't like getting something that looks different. It was easy to install, but the strength is questionable at this point.

3. Bicycle Ceiling Mountain Adjustable Capacity

Bicycle Ceiling Mountain Adjustable Capacity

Includes a pulley system, mounting system and rope. The bike lift is designed to ceiling mounted for bike storage in garage or other place when it's not used, which can save a lot of space for your garage. The USAGE is VARIOUS USAGE- The bike lift hanging rack can be used for a variety of things, from kid's cycle to mountain bicycle, kayaks, extension ladders, and other gears. HEAVY DUTY Heavy duty iron and nylon ropes are used for the ceiling bike hoist. The bike pulley hanging system can lift up a mountain bike or road bike up to 100 lbs. It's easy to install. The bike hoist is easy to install and ceiling mount. It is easy to hang your bicycle/ladder from the ground with 3 pulley hooks and 45 ft rope. Their hooks are coated and welded to protect your bikes from scratches. It's time to say goodbye to your worries about bike damage or potential collapses. Their hooks are coated and welded to protect your bikes from scratches. It's time to say goodbye to your worries about bike damage or potential collapses.

Brand: Ihomepark

👤Great product. The hoist wheels are wide so they prevent the rope from going into the crack. I had to contact the customer service because my rope was a little shaky. They only offered a $10 Amazon credit for me to purchase my own rope, instead of sending me a replacement rope. The rope I got was larger than the bike hoist I had. I made it work. I like the fact that the rope I bought on my own is a quarter-in size, it makes it easier to lift the bike to the ceiling. The other type of bike hoist that I used to have was of a lesser quality, but I know this is a great product. There is a I highly recommend that you mount this onto a 2x4 and then mount the 2x4 to the ceiling to make it more sturdy. I will post pictures soon.

👤If you wanted a better bike hoisting system, you would have to spend a lot of time figuring out what to buy and how to assemble it at a hardware store. The packaging indicates a lesser weight capacity than the 100 lbs listed in the listing. The weight capacity in my packaging is 100 lbs. I am confident that it is more than 100 lbs. This hardware could support it. The installation method is the actual limiting factor on weight capacity. The box has screws that are normally used for installing screws in sheetrock. Anyone who uses those to attach a sheetrock ceiling will have a problem. The result will be weaker if the hardware is screwed directly into the wood after a proper size hole has been pre-drilled. There are suggestions for mounting in other reviews. The instructions don't provide guidance on how to mount it. The installation instructions don't mention the correct route of the rope. There is a hole in the cam lock that should be threaded. It would be difficult to upsize the rope because the hole is barely large. The sheaves and pulley cheeks have gaps. The provided rope can jump out of the sheave grooves if there is a gap. The sheaves are designed so that squeezing the cheeks to reduce the gap results in a lack of lubrication at the axle. The hole in the cam lock does not allow a substitution of a larger rope. It is for this reason that I am giving 4 stars rather than 5, because a person could be misled by the plastic sheetrock anchors and fail to attach to solid wood. The hooks to hang the bike do not have enough curve to hold securely and you probably will need to bend to get a good result. I use a cord under the frame section to secure the hooks to the seat because it doesn't have a structure for them to attach to. There is a chance of conflict with hooks if you have a speedometer or similar device mounted on handle bars. The cleat that is provided to tie off the rope when the bike is lifted is pretty good, but the cam lock is enough to tie off the rope. If you are a belt and suspenders person, you might want to upgrade the cleat. The cleat can be used to get excess rope out of the way. There is a I would buy another one if I had a second bike because this is a good solution at a good price.

4. Gladiator GarageWorks GACEXXCPVK Advanced Storage

Gladiator GarageWorks GACEXXCPVK Advanced Storage

Steel, Polypropylene, and rubber cover on hooks are the materials of the product. The weight capacity is 100 pounds. Includes a bike hoist. The color was bright green and black. It's a great way to hang child- or adult-size bicycles. The plastic construction is strong. The ribs support up to 50 lbs. The closed loop design makes it easy to open and close. 6 in. The width is 9.75 in. The high is 3.75 in. deep. 6 in. The width is 9.75 in. The high is 3.75 in. deep.

Brand: Gladiator

👤These bike hooks are easy to use and sturdy. Not much can be said. I added some screws to the opposite side of where the screws go into the stud to make sure the hooks were installed on the ceiling. I have full trust that these will work for me.

👤The original unit had rubber cushions for the bike wheel. This one has plastic arms. I installed it exactly as it was, but no matter how I position the bike on the hooks, it ends up pointed toward the door. The bike had to be pointed straight toward the wall, the rear wheel at least 6 inches to the right of where it is now. It's always in the way when you open the door. The version 1.0 was still available. This one cost three times what it did. I should have bought that one. Version 2.0 is cheap and wobbly. What is the point of only getting 2 screws with a product that has 4 holes? They should have included a couple of screws that aren't going into a joist. 30 cents per unit by only including 2 screws? I wish I had not bought it. I don't recommend it and wouldn't buy it again.

👤The claw is great, but the screws that come with it are not strong enough to screw into a ceiling joist without stripping. The claw swings a little because the screws can't tighten any further, so they can't be secured. I would chalk it up to user error, but I have hung other things from these joists, and the screws do just fine.

👤These seem to be very easy to use and install. They did not work for us because we have a fat bike. I was pretty disappointed because it seems easy to use. We bought regular hooks.

👤The best accessory purchase of the season. I am over 5' tall and it works well for me to put my bike up. We don't have the bags loaded when hanging, but it works well with our Trek 520 touring bike with the bag brackets and bags on. I think the skeleton should be trusted to hold. Only one other comment would be to be sure that you don't end up resting on a spoke.

👤It is easy to install and use. Lift and lock it. I have time to play a thousand piece puzzle or watch all of the movie.

5. CREST Products Piece Heavy Storage

CREST Products Piece Heavy Storage

We are committed to make sure their customers are satisfied with the purchase of wall mount garage utility hooks from them. If you have a question, please contact them. They want their customers to be happy. The bike hooks are of the highest quality. They make sure that you can hang your tools without worry. The hooks are coated with black material that protects them. It is easy to hang your bicycles, sporting goods, or tools in your garage with a ceiling rafter or wall stud. You can depend on these garage hooks for years of storage. These bike storage hooks will help you organize your garage space. If you want to organize your garage more efficiently, you can use the storage hooks to organize the chaos inside. If you are looking for a great holder for your heavy tool equipment, this is the hook that will help you solve your problems. The hooks are black and can be used in any home interior or garage design. Storage hooks give a resting position for your bikes. If you want to keep your bike out of the entryway, you can hang it on the wall and leave room in your garage. Storage hooks give a resting position for your bikes. If you want to keep your bike out of the entryway, you can hang it on the wall and leave room in your garage.

Brand: Crest Products

👤It is very easy to install.

👤It's time to think about packing the garage for winter. We start thinking about this in New England. These hooks are perfect for hanging pool stuff in the winter and leaf blowers in the summer. These hooks are perfect for keeping things off the ground and vertical. It is easy to store things away and find them next season with the hooks.

👤The 7/32 drill bit works better than the 1/2 drill bit. After drilling pilot holes, the hooks were easy to screw in. I am sure these hooks could hold more mountain bikes.

👤There were no directions in the plastic package. I was able to figure out the size of the holes. The hooks are not as large as they should be. I was grateful to have floor space again in my garage, as I was able to store some of my lighter bikes on the hooks. My bike is on the floor.

👤What I was looking for. They are great hooks.

6. Extra Large Utility Hangers Ceiling Furniture

Extra Large Utility Hangers Ceiling Furniture

Storage hooks give a resting position for your bikes. If you want to keep your bike out of the entryway, you can hang it on the wall and leave room in your garage. The 8 inch hooks with 4 inch wide opening are much more heavy duty than other 5” or 6” smaller hooks, and are unique extra large size in the market. 1/2 inch thick all steel construction provides 120lb maximum capacity per hook, which is the strongest in the market compared to 70lb capacity from other hooks. The threaded screw end allows you to easily tighten the hooks into the wall stud or ceiling joist after drilling the pilot hole. Non-marring and non-sLIP is a soft vinyl coating that protects the surfaces. It's ideal for ceiling hanging or wall mounting of bicycles, ladders, lights, lamps, recreational equipment, lawn tools, cords and hoses in your home, basement, garage or workshop. It's ideal for ceiling hanging or wall mounting of bicycles, ladders, lights, lamps, recreational equipment, lawn tools, cords and hoses in your home, basement, garage or workshop.

Brand: Efficere

👤Excellent for hanging bikes. I like it. I made two orders of 8 inches bicycle Hooks and 12 bikes fit in a 10 feet wall. This is a good one to recommend. It's a lot of work.

👤I bought those black ones from other sellers. It is too small and soft. It bends! There is a This one is perfect. 3 pairs for 3 bikes. Less stuff in the garage.

👤You could hang a VW up. They are a lot heavier than I thought. More than I needed. I'm fine with that as well. Better than not.

👤I used a drill bit for the pilot holes. The hooks were screwed into the holes I drilled. I have a lot of lawn equipment hanging from them and they are sturdy. Those will be holding up for a long time.

👤I need these heavy duty hooks. The size is perfect and the price is unbeatable.

👤I bought other ones and they are not as strong as these.

👤Excellent product and pretty much what was advertised. The description says "4 inch wide opening", which is not true. The attached picture shows it is closer to 3 1/2. There is a I don't believe for a second that this will support 120 lbs, but it will hang from the ceiling in a 2x4 position. I was able to get my gauge up to 95 lbs by using a top out of 100 lbs. I hung from it, so it supported my body weight. I only did that for 5 seconds and I didn't feel anything bend. I could feel the end of the hook starting to bend when I put my body weight towards it. The dimensions are accurate for most of the time. The widest part of the opening is closer to 3 1/2 than the 4 inch wide opening is implied. If you bend it to have a wider opening, that could also reduce the structural integrity, making it so it wouldn't hold the same amount of weight without bending. The description says that the steel is 1/2. There is a soft matt vinyl coating on the 1/2. The steel is only 1/3. It's still a strong picture, and you'll probably be interested in the dimensions. The larger drill is better for the pilot. It will take more elbow grease to get it in there, but it will be much more secure in the 2x4 stud. You have to find a stud to put this in.

7. Saris 6020 Cycle Glide

Saris 6020 Cycle Glide

The tire lights are easy to install and compatible with America tire valves, you just need a wrench and a car wheel air valve. Pressing for a while will turn on the light. Store up to four bikes within arm's reach. You can free up floor space in your garage or basement. Individual access to each bike is offered by the prototype glider design. There are WHEEL HOOKS. The bicycle's wheel base can accommodate a wide range of bicycle sizes. It can be used with bike tire widths up to 2.5. There is an add-on for expanded six-bike capacity.

Brand: Saris

👤The e-clips that attach to the pins aren't supposed to support any substantial forces against them. They are made to prevent pins from slipping through holes. The design of the rack puts the weight of the bike on the little e-clip. This flaw has led to one of my racks falling down. I replaced the pins and e-clips with a Home Depot aluminum binding post. Rolls are just as smooth, but are now much stronger. I hope I don't have to come up with a similar fix for the big hooks since they have a similar weak design. I'm surprised to find a poorly designed component in the rack, it's a very cool system. The rack would get five stars if it weren't for the e-clips.

👤After reading a few reviews of bikes falling off, I was concerned about my wife's new car, but I love the basic idea of this product. I set out to improve the hardware. I replaced the e-clips that could be lost with locking nuts. The locking nuts fit perfectly in the hole and I had to thread the hooks with a 6mm die. The lag screws were thrown in the trash and I used a flanged screw to remove any potential pull through. This product would be a full 5 star product if the manufacture improved the hardware. Maybe your fine without the improvements, but what are you hanging your bikes over?

👤I looked at various bike rack systems to find the right one for my garage. I couldn't mount on the ends, so I eliminated the ropes that needed to be anchored to the wall. I don't want the floor to the ceiling rod that holds 2 bikes because I want nothing on the ground. I'm glad I invested in this option because it was the most expensive. It was easy to install, it's forgiving if you're off, I was off from one end to the other. It's important to have a good stud finder. It took me about an hour. I recommend watching the YT video on how to install. I stopped using the manual after watching.

👤This product is amazing. I like its ease of use. It is well thought out. The e-rings don't seem like a very secure solution to attaching the glides on. I think the e-rings will fail on some of the racks. The bikes should not fall on top of a car. Love, love, love it.

8. POWERACK Ceiling Bicycle Install Hangers

POWERACK Ceiling Bicycle Install Hangers

Their 4 pack garage hooks are great for hanging sporting goods, tools, lawn chairs, and more. Bike garage hooks keep items out of the way. Strong and Stable ALLOY STEEL. The bike hangers for garage ceiling are very strong and can support up to 50 lbs. The powder coat is scratch and rust resistant. Their hooks are built to resist temperature changes. The ceiling storage cages and wall shelters were specially designed. Simple solutions are offered by garage storage accessories. Hang each flat hook on a rack or metal shelf. Storage solutions have never looked better. The bike hooks for ceiling are black and sleek and will add a modern feel to the garage space. Get these hooks up and ready to use in a second. Their hooks for bikes are compatible with wire rack and shelving units. When you want to change things up, the bike hooks can be detached and moved.

Brand: Powerack

👤This hook works perfectly in my closetmaid wire closet shelving. There is a I use them to hang mops and suspend laundry baskets.

👤They work well. The go parallel with the rack is a complaint.

👤My overhead storage was made by a different company. Even though it wasn't completely snapped into place, the bike is still safely held.

👤False advisement is a crime. They are heavy duty, but they are not as long as I would like, I could buy a 6 pack of the same quality fir for the same price. Not good.

👤The price of hooks is fair.

9. Bike Wall Mount Horizontal Bicycles

Bike Wall Mount Horizontal Bicycles

Keep your garage or indoor space tidy and free up your floor space by storing your bike in a convenient location. Their wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Most bike types have a storage system. The bikes can hold up to 22 kilogram. Not suitable for bikes with wide handlebars (31 inches / 78 cm) or fat bikes. It is safe and secure to store your bike in a horizontal position. The wall mount is made from strong steel. The bike arm locking mechanism uses a reliable gear system. The angle of the wall hanger can be adjusted to keep your bike level. Installation instructions and mounting screws are included. The push button lock system ensures that the frames can be secured, and the cradle arms ensure that all the frames can be accommodated. A secure push button mechanism secures the extendable beam from 8.7 inches up to 12.6 inches. The Armcradles are made from soft TPR rubber material that will not scratch your bike. The frames are protected and the tube shapes are not marked or moved. To prevent front wheel from knocking against your wall, you need a rope that is strong and elastic. If you have a problem with your purchase, they are happy to give you a Refunds or a Replacement. If you have any questions or queries, please get in touch with them and they will be more than happy to help. Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Unless there is a strong wooden stud behind the wall, do not install on it.

Brand: Pro Bike Tool

👤The rack is nice. It is built out of quality materials and has a lot of flexibility. The mounting points for this rack are a bit odd. They provide you with 3 small screws and masonry wall anchors, when they should have provided a beefier faceplate and 2 lag bolts to mount into a stud. My solution was to take a piece of scrap wood and mount it vertically to a stud using 2 heavy duty lag bolts, then mount the original screws to the wood. The rack gets 5 stars from me.

👤I was concerned my handlebars were too long for your wall mount, so I sent Chris a letter. To make sure they fit, I put a 2x6 board on my wall stud and then put a wall hanger on the board. It allowed plenty of room for the handlebars. There is a I had a problem attaching the hanger to the studs behind the plaster board. There is a one and three-eights inch distance between the wall hanger's two holes. The wall thickness is one and one-half inches. There is no time to get a strong attachment with only a quarter inch overlap. The instructions give a good idea of how to install the hanger on the wall. They warn that the plasterboard won't support the hanger. Very true. The wall stud's width is insufficient. Instructions to attach a 2x6 to a wall stud and then attach a hanger to that board were added by me. There is a The cradles for the bike are red or black, which is a point of favor for the Pro Bike system. The shape of your cradles allows room for the control cables if the bike has them beneath the cross bar. Great feature. There is a Thanks for your help. I hope my experience is useful to others. You have a good product.

👤Highly recommend this bike storage system. Enough about how great it is. I want to know how to install it. You probably do as well. I installed 3 holders. The first thing to do was to find the studs. To double check the exact location of the stud, I used a finishing nail and hammer to find the sides of the stud. I was glad I did because some of the stud finders locations weren't right. There is a You can mount the 3 holes of the brackets into one stud with longer screws than those that come with the kit. Some people have said this works. It didn't seem like it would be stable. I decided to mount a 2x6 across two studs. A 2x4 is not wide enough. I cut the 2x6's 22” long so they fit over the end of each stud. I used lag screws to attach the 2x6's to the studs. I used lag screws on both ends. There is a You will need a impact driver to get the lag screws into the stud. A regular drill won't do it. If you don't have an impact driver, you can always use a sockets wrench. After I tightened the lag screws down, I had to use a sockets for the 5/16 lag screw. I measured the bikes with the holder to make sure there was enough space between them. The measurement resulted in a spacing of 40” from the top of one board to the top of the next board. It was perfect for my bikes. Different spacing is required for your bikes. The wall mounts are perfect. Unlike other systems that are horizontal, these allow you to adjust the arms to fit the different types of cross members as not all bikes are alike. I think they are worth the money. The 2x6x8 was $11 and the 12 lag screws were $9. If you decide to purchase these, I hope this helps.

10. Impresa Products 4 Pack Bike Hanger

Impresa Products 4 Pack Bike Hanger

Koova's Bike Storage Racks are guaranteed to last. They offer a lifetime satisfaction guarantee. They will repair, replace or refund your money if you are not happy with a product. Bike storage hooks are perfect for both indoor and outdoor utility storage. It's an ideal solution for hanging bicycles, power equipment, furniture, tools, and hoses in the garage, home, apartment or wherever you store them. Their bike hooks have a unique design that makes them easy to use and easy to store. A vertical bike holder set-up is cost-effective when compared with a traditional bike rack. Their bike hangers are compatible with all bike types, including road, mountain, hybrid, BMX, cross, cruiser, trials, tri, fixie, fitness and kids bicycles. Heavy-duty galvanized steel with a soft non-marring, non-slip coating is built to last and protect. Each of the hooks can hold up to 100 lbs. It is easy to install. When using their bike wall mounts, make sure to install in a stud/wood wall to make sure the hook stays secure. The dimensions are 7 inches by 7 inches. The width is 4 inches. There are 4 hooks per pack. It is easy to install. When using their bike wall mounts, make sure to install in a stud/wood wall to make sure the hook stays secure. The dimensions are 7 inches by 7 inches. The width is 4 inches. There are 4 hooks per pack.

Brand: Impresa Products

👤It worked out well to hang the bikes from the wall. 2x4. The lag screws are on the wall.

👤These were bought to hang my bikes. They were easy to install and fast to deliver. I ordered another pack of hooks after using one pack. I used 2 hooks for each bike.

👤The regular size bike hooks don't leave enough room for mountain bike tires when screwed into a sheetrocked ceiling. The larger they are in both directions, the easier it is to hang my bike up. I've added a picture to show you the difference between a hook and a picture.

👤Installation took 2 minutes after I found the stud, with the first step being to drill a hole in the wall with a 1/2 inch bit. I was almost able to lift off the floor before I felt the hook start to bend. No worries holding a bike. There is plenty of space for me to slide my tires in. I've noted that a couple other reviews mention that the threads aren't very long when used through drywall but as long as the whole screw part goes into wood, it will be fine, just make sure to cut a whole through wallboard big enough for the shank to slide into until

👤I should have used an anchor to hold the hook in the wall. I have a hole in the wall and my bike is in the living room. My fault. My previous review is what I stand by. I want to be doing this the right way in my next apt ill. Great product. Exactly what I needed. There is nothing complicated to do here. There is a The directions recommend using that thing to find the dry wall. There is a We drilled a hole and screwed it on because my boy friend was hesitant. My bike is well held. My bike is hanging off the ground.

👤Excellent quality, fast shipping. My Fattie is suspended from the ceiling. There is plenty of room to hold the tires.

👤The rubber coating on the hooks tore. If you plan on using these to hang your bikes on the wall, you will need to put something over the hooks or you will scratch your rims.

👤It is easy to install. The hooks can be easily installed by hand after drilling a hole. The entire process took about 30 minutes, and 25 minutes of that was hanging a 2x4 so that we didn't have to line the hooks up. The garage of a newer house would likely not need the 2x4. There is a We'll probably be buying a second set soon to get more storage space.

👤The product was great. I received only 2 from the pack of 4 that was stated.

11. SMARTOLOGY Storage Ceiling Bicycle Utility

SMARTOLOGY Storage Ceiling Bicycle Utility

100% QUALITY SATISFACTION: They make sure to give you the highest quality product and guarantee 100% satisfaction. If the product doesn't meet your requirements, return it to them and they will replace it for you. There is an 8-pack heavy duty steel bike utility storage hook. The dimensions are 6 inches long and 2.6 inches wide. Good gift for Christmas. Installation is easy because of the thread design. When using their bike wall mounts, make sure to install in a stud/wood wall to make sure the hook stays secure. Proper anchors are not included for drywall. The hook is constructed from heavy duty galvanized tough steel with a soft matt vinyl coating to prevent scratches on your items. The hooks can hold up to 60 lbs. It's versatile and reuseable for ceiling or wall hanging of bicycles, power recreational equipment, furniture, lawn garden tools hoses, in the garage storage, home, apartment or wherever you store your items. They are a US business located in California. Your purchase is covered by a 12-Month Warranty and 60-Day Money Back Guarantee. They are a US business located in California. Your purchase is covered by a 12-Month Warranty and 60-Day Money Back Guarantee.

Brand: Smartology

👤I bought these because theTEKton Heavy Duty pair I had originally purchased were out of stock. These seemed similar and had good reviews, but they were smaller and less sturdy. As I screwed them in, the rubber coating began towrinkle. I think they'll be able to hold it. I worry about heavier items. Overall disappointing.

👤Installation was a pain for the items. The threads don't go all the way to the tip of the screw so it's very difficult to put in. I found that a 7/32 bit worked the best. It was too small for 1/3 inch. You need to be very careful when putting the hooks in because the rubber around the end of the hook is torn. I was able to move the rubber coating to cover the break, but it was just a cover up. It would be too much of a hassle to come back and look for another set of hooks after putting them. I had 9 hooks in one package so it was a convenience.

👤The bike storage hooks are not bad. It is the cheapest way to suspend the bikes. The hooks are too short if you're going to hang the bikes from the cross members. The handlebars and seat made it difficult for me to use the hooks on the upper frame of the bike. Some people like to hang their bikes. I don't think that's a good idea.

👤I am really happy. I ordered the hooks for my garage. They are very easy to install. If you use an existing hole or drill a small hole, just insert and turn it until it's tight and stable. It's easy! I saved a lot of space in my garage by hanging 4 bikes. I was able to use the other hooks for different yard equipment. I'm very happy with this purchase. They arrived on time and I will definitely buy them again in the future.

👤You get what you pay for. The hook had 20 pounds of weight on it. The screw portion of it was sheared off by a small amount of weight. I thought it was the wood that failed, but it was actually the very low quality hook that failed. If you don't like your care, don't hang things near your car. I like to wait to write reviews. I wanted to use them for a project when I bought them. This is what happens when I use them.

👤The thing had a hard time getting through the wall. The gypsum plaster sandwiched between two sheets of thick paper was a challenge. It wouldn't make a difference. I can't hang a bicycle and extra set of wheels. Back to the home depot for the hook.

👤The steel appears to be hot dipped. The steel has a matted plastic coating that covers all of the steel. I wanted the steel to be covered so that it wouldn't get scratched. These fit the bill. The wood was dry and hard so a pilot hole was required to put the hook into a 2x6 The hood works as expected.


What is the best product for bicycle garage hanger ceiling?

Bicycle garage hanger ceiling products from Saz Home. In this article about bicycle garage hanger ceiling you can see why people choose the product. Dirza and Ihomepark are also good brands to look for when you are finding bicycle garage hanger ceiling.

What are the best brands for bicycle garage hanger ceiling?

Saz Home, Dirza and Ihomepark are some of the best brands that chosen by people for bicycle garage hanger ceiling. Find the detail in this article. Gladiator, Crest Products and Efficere are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to