Fit 2 strokes 49cc 50cc 60cc. 66cc The bicycle push bike has 80cc engine parts. Applicable models 49cc/ 50cc/ /60cc is a good size for a pull start starter. 66cc/ 70cc/80cc. Two-stroke engine bikes. Please be assured of your purchase, it's brand new. High quality aluminum. The pull start starter is made of high quality aluminum alloy material, which is wear resistant and durable, not easy to break, and has a long service life. The pull start is manufactured to strict quality standards. Professional Manufacturing has an Exquisite handle. The shell is thick and easy to start. The 80cc 2 stroke pull start has good reliability and low working noise. The pull start for 80cc motor is easy to install and the pull string is easy to pull. Reliable to use, the ideal and direct replacement for an old or damaged pull start. You can start your vehicle with a cable. High quality products and services have always been what they stick to as a professional seller. Before leaving the factory, every pull start part has passed a quality inspection. Before purchasing, please confirm whether the product is suitable. High quality products and services have always been what they stick to as a professional seller. Before leaving the factory, every pull start part has passed a quality inspection. Before purchasing, please confirm whether the product is suitable.
👤I had to cut the left pedal lever to clear the pull starter housing. I replaced the pull cord because I could see that it was in bad shape. I bought a lawn mower and a pull cord. There are good videos on the internet. I used Sta-Bil "Start Your Engine" starter fluid and started my car with ease after flipping the black air cleaner upside down.
👤I gave it one star, but I shouldn't have cheaped out on everything, especially the pool cable, which I ripped off and tried to fix, and they should have spent money on it.
👤I replaced the rope with break wire because the plastic bit that the rope would draw through would ware as fast as an eraser. Your welcome for the idea to use a brake line.
👤Didn't get to use. As per the other reviews, broke before it worked.
👤The product broke after I pulled it a second time.
👤Had to tighten the recoil spring. The plastic rope guide is cheap. The grooves were burned within three pulls.
👤Don't buy it, it didn't work the first time you tried it.
👤I like the products because I don't have to start my gas bike, but the problem is I didn't know it was on the front porch, the delivery guy should have rung the bell to make sure nobody was messing with it. Thank you, I got it.
If the accessories are not in the package, contact them. The new aftermarket coil and ignition coil are brand new. It is easy to match original equipment. The package includes a x Magneto coil. The CDI ignition coil has mounting parts. 90-day money back guarantee and one year warranty are provided by them. If you encounter any problems with your money, they will replace it. 90-day money back guarantee and one year warranty are provided by them. If you encounter any problems with your money, they will replace it.
👤I was hoping to get better readings on my new coil but they were not much better than my original set. Not sure why? Two different 87V meters were used. I will update this review when I know what happens when installed.
👤If you're going to have a bike engine, then you should have a spare mag and coil and a couple of gasket sets. One of my bike engines has gone over 5000 miles without any problems, and the other has been taken apart 3 times in less than 2000 miles.
👤The one shown in the picture is the spark plug cap. I bought this one because of that. If that makes a difference to you, this came with a cheaper quality plug cap. I haven't tried it yet to see if it works. I wanted the better style cap, so I'm thinking about returning it. The white wire is not shown in the Amazon ad. I post pictures of what I received. Unless you are trying to run lights of the motor, you don't need the white wire. If the white wire on the stater makes a difference to you, I will give you the one I received.
👤When I received this item, it was dead magneto and did not work after installation.
👤The bike does not kickstart with stock but it does kickstart with the new CDI and magneto and it has a better response than stock. Will give an update after the first ride.
👤Amigos, lo recomiendo. It was funciona. It was Sin Querjas.
👤I bought the mag and CDI to replace the one that quit on my bike. It works now. I would say it's highly recommended.
👤I bought the mag and CDI to replace the one that quit on my bike. It works now.
👤The product works as it says. The rubber that holds it in keeps popping off the plug.
The center to center spacing between the pins is approximately 7/16" wide. The engine is the 100CC. They used a generic version of the user manual for 80CC/100CC because they look similar. It comes with all the necessary hardware for easy installation. Heavy duty metal engine body. The max.speed was 48 km/h. Fuel type : 90#; N.W: 11 kilogram; G.W: 12 kilogram. It's for most 26" and 28" bikes. The frame should have clearance between the bottom brackets and the top bar of 9-11mm, and the diameter of the frame tubes should be 25-28mm. 50mm bore single piece cylinder, an upgraded CDI, Performance Speed Carburetor and more, high performance Speed Carburetor, silver anti-corrosion coating, high performance CDI with Yamaha components, improved magneto, high end allen bolts, improved gas cap. The mixing ratio for fuel and oil is good for the first 300-500 miles, but it is not good in the summer because of the hot weather. Please limit the riding time to a maximum of 1 hour for the first few rides to avoid any problems with the motor. If you have a question or are not satisfied with the product, please contact them. You can find the order by going to your account at Amazon. Click the seller name to enter the store page. Click "Ask a question".
👤The bt 100 engine kit is uncommon to fine one of these engines. There are a few issues with the bt 100 engine kit. The magnet seems to be weak on one side. If I am able to find a replacement, I will have to.
👤It was a great way to get back and forth from work. It was amazing to feel that kind of power on a light frame bicycle. I added a 36 tooth sprocket and it definitely increased speed. It went from 30 mph to 35. I added a air filter and rubber motor mounts to make the motor less vibrate. All in a great product. It is very easy to put together.
👤The motor kit is great and there have been no issues so far. It's worth $200, but not if the exhaust isn't able to upgrade or change, my buddy built it for me and you can contact him on his Facebook page called - New motor bike builders.
👤They changed the engines. Either that or they have a few different ones. I have no issues with the motor. The chain was changed to a two bolt because I didn't use them enough. There is a great engine with lots of power.
👤I built and bought many engines because I use them for my food delivery job for two years now. The engine and accessories are the best yet. The bigger and better design of the carb makes it non-standard. If you buy a 100cc engine from bike berry, they will send the other ones. If you tighten the studs all the way in, they are not long enough to put bolts on. The other accessories were all of the same quality, and it looked like this guy took the time to package them. One thing I like about it is that the head came assembled, everyone else started making the customer do it, which is a pain in the ass. I just connected it to the bike. I learned that you have to be careful with the journal bearings, there is only a small film for them to ride on, and 3cc of oil in the crankcase, on my last 100cc from bike berry. Don't accelerate down hills when the engine is not running. I'll never find a 2 cycle engine that will get more than 5000 dollars worth of food deliveries done, but I will update when this engine takes a bad turn. It was an edited version. The motor took a bad hit on me. It has been 3 or 4 months of hard work delivering food. This engine has made me more money than any other. It was probably my fault since I forgot to put oil in my car before I left the gas station. It can happen in a few seconds if the circumstances add up. My mind is against me, and it's been so long since my back tire or my engine had ruined my day that it had to intervine! What an ass! I watched the destruction of the engines. I bought an extra one, I will be much more cautious and get an accurate picture of how much better this engine is than the rest.
If you didn't receive HURI branded pocket tape, you could apply for a full refund. The package includes an engine mount plate. Brand new and high quality! Replacement parts are not original. Your trust is deserved with safe transportation. Your trust is deserved with safe transportation.
👤I was excited to receive same-day delivery on this product as I was anxious to ride my motorized bike, the original motor mount seemed to be nothing but a pain in my neck, I was constantly adjusting it and having issues with where in relation to that mouth I thought it might be best I used my imagination to find a good amount. I had the same problems with this style of motor mount that I had with the original one, so I decided to go back to the original one. I don't know how to return it. I took a piece of angle iron and drilled a hole through my frame below the seat post, and then I took my original motor mount drilled holes in the top. I don't need to make any more adjustments to my bike, I have no problems with my motor being mounted to my bike, and I recommend finding a way to use the original mounting Pad. I had issues with expecting Lee.
👤The bolts and washers that I received were 10 millimeter. Different from the discribed photos. It works the same. The mount that came with my kit was more difficult to adjust. I had to cut a V in the front of the plate to fit my 4 stroke engine. I had to drill a couple of holes to move my engine closer to the frame. There is a This is a good mount.
👤I used the product as it was intended to be used. I was going to use rubber roofing rubber, but I decided to use a rubber layer between the mount and frame. It's a recommendation to prevent slipping. I recommend starting your bolts but leaving them slack to have some fun with moving the engine in place.
If you have a quality problem, please contact them. 50cc, 60cc, 66cc, 80cc are all 50cc. The bicycle regular frame has an engine motor. The package includes a mounting kit. Replacement parts are of high quality. The replacement part is the original part. If it fits your model, please check part comparibility. The replacement part is the original part. If it fits your model, please check part comparibility.
👤It does what it says, but you have to use 2 bolts to keep it in place, so it can move from left to right. It is a thin piece of metal that you are attaching a fuel tank to. It is a great product but not perfect.
👤I'm happy this exists. I don't know how many tanks have been soldered in. I don't have to stress the bolts to get the tank to stay tight because this will allow the plate to take all of the vibration.
👤I thought the product was going to be made of steel, but less weight is a good thing. It seems sturdy. I wish I didn't have to drill my frame, but couldn't come up with a viable alternative.
👤Do you want to replace your fuel tank many times a year? The product is for you.
👤I mounted it on the rear rack. It worked well.
👤If you don't mind the holes drilled to your bike frame, this mounting kit is what you need. It fits the 2L fuel tank perfectly. I get the best Christmas present for myself. It is!!!
👤Works well for mounting a gas tank.
The package includes: a new cylinder, a new piston kit, and an alum intake. The intake port is 32mm and 40mm for most 2-stroke engines. The intake manifolds are made of aluminum and copper. It is designed to be used with a boost bottle to improve the performance of your bicycle. The outer diameter of the neck is 19mm. The package includes: 1x Intake Manifold, 1x Gasket, and 2x M6*12 Hexagon Screws. The package includes: 1x Intake Manifold, 1x Gasket, and 2x M6*12 Hexagon Screws.
👤Product quality is excellent, I didn't have a problem with it, all intakes should have a oring built it, that was very helpful. It's nice to have on a tight frame. If you don't use the bottle booster attachment, you can find a bolt or something to plug the hole.
👤I got this because the stock intake was too big for the frame to fit in, so I got this intake and it went on without a hitch.
👤This helped my motorbike. Don't forget the bottle.
Before purchasing, please check the size of your original one. The bicycle engine kit has a speedometer. The bike engine kit fits most men's bikes with a V-frame, at least a 8.5" height clearance for the engine. The universal mount may be required for large bikes. The mixing ratio for gas and oil should be1:1 for the first 300 miles. It is important to avoid a motor lock up. The 80cc bike motor kit has a single cylinder, air-cooling, 2-stroke engine. The motorcycle has synthetic 2 stroke oil. Please use premium quality oils to prolong engine life. The air cylinder should be lubricating before it starts. 2 stroke bike engine kit has a maximum power of 2.2 kilowatts and a rated power of 1.5 kilowatts. The universal face plate is required for the larger frame size. There are notes. If a new car is leaking oil, take apart the bowl and bend the claw down a little to fix it. Remove the cap if there is no spark plug. The 80cc engine kit air cylinder might take a while to adjust to the load. Please limit the riding time to a maximum of 1 hour for the first few rides to avoid any problems with the motor. There are notes. The motor needs to be maintained after riding breaking time. Premium quality screws and bolts have been upgraded to improve performance. There are notes. The rider needs basic hardware skills, tools, and hours to install and fine tune their vehicle. If you don't have experience or the first time, please read their instructions and search "80cc bicycle engine kit" on the internet, it will give you a lot of help and help you fix the issues during installation process.
👤If you don't know what to do, just go on to the video and see how easy it is to put it together. There are lots of videos about these motors. I had a problem with my bike when I put gas to it, but I just put the tabs on the float and it solved the problem. I recommend red Lock tight and if you don't have an innertube try to find a old one, it's a lot of fun and you should buy it again.
👤Installation was simple and all parts were correct. It was easy to start up. The engine began to clunk within 1 minutes. The bike was stopped to examine the housing. The nut was loose and the tread on the shaft was stripped. The threads were fixed and the nut secured. I tried to start again, but couldn't. There was no spark being sent.
👤It's cheap and it's worth it because parts are all over the place. They all have a washer or 2. Overall 3.5
👤I was completely satisfied with this kit. It took me only a few hours to build it and it exceeded my expectations, it is one of the best things I have ever bought.
👤Good motor. It's better than the last brand I had.
👤The setup chain was too short and the clutch lever on the left side of the engine was short. The speedometer won't connect to the bike.
👤Fue un poco complicado de armar.
If you have a problem, you can contact them by email. The package includesclutch cable. The left clutch lever is made of alloy. The lock handlebar has Throttle grips. You can kill switch. Please check for the details and make sure it's the right one. It is easy to match original equipment. They provide clear pictures. Make sure that it can fit your machine by comparing its appearance, shape and size with your original unit. They provide clear pictures. Make sure that it can fit your machine by comparing its appearance, shape and size with your original unit.
👤I had to use a 1/2 inch drill bit to ream it out because it was too small to fit on a normal handlebar and I had to paint it with silver metallic nail polish. I guess.
👤The kit is correct this time, thank you.
👤Didn't like that they didn't include the throttle cable or the clutch cable, will let Amazon know about it, you don't get what you pay for.
👤It is a good backup for a bike. The plastic throttle on these bikes can be broken easily.
👤Well made for the bike and engine. It worked very well. Thank you.
👤The lever gauge was the best upgrade part of the part kit, it was easier to use the recommended spark kit. I like the grips at eagle's Auto.
👤A motorized bicycle works great.
👤All is good for a new installation on a new build with an old motor.
Tough heat treated steel. Bike Engine Red is a high performance Carburetor. 50cc 60cc 66cc 80cc. The bicycle motorized bike engine kit is for bikes. It's a high quality Carburetor for 49cc. 50cc 60cc 66cc. 80cc 2 stroke kick start petrol conversion kit. It's a high quality Carburetor for 49cc. 50cc 60cc 66cc. 80cc 2 stroke kick start petrol conversion kit.
👤The last two had problems with the last three. The first one had an air leak and the second one had a float that would sink. This one works. Before I put it on, I tested it. It seems like it would work. The grasp on the intake manifolds is very tight. We will be on the road again. We will all be happy if you keep your business and products in good shape and keep them good quality. The 2nd to last slot is where the engines like to run a little richer and fatter. You should be able to hear a little stroking. You will get more cooling and better protection if you burn more fuel.
👤I bought this for the air cleaner. The frame needed clearance. The jet seems to be a 65. I eyeballed it and didn't pin gauge it. The ones I have had come with a 65 jet. The button for primer is different. It appears to be a pop rivet with a spring on the post. The bowl screw is interfered with by the extension of the button type. I have yet to see this in a nt type speed car. This is a big plus. The slide cap is painted red and the cable accessory is painted blue. The needle in a 5 notch is apposed to the 4 notch. This will allow for more adjustment.
👤The Seeutek PK80 kit came with a replacement carburetor, so I bought this one. The original one wouldn't fit in my frame. The air filter cover is red and thinner than the other ones. I have no issues running my PK80 so far. The functions of the choke lever and the priming button are very good.
👤I had an idea something was wrong with the car I got. After we got it out, we found that the engine was out of round. We used the original off the engine. It wouldn't stop leaking even if we did something to stop it. Trust me, I tried every trick in the book. I have been working on vehicles for 45 years and nothing I did made them sound better. While I was striping it down for parts to rebuild the old car, I found a hair line crack in the top housing. There was no way to find it unless you were striping it. I don't know who passed this car. They need to let it go. Amazon needs to test these things before they sell them.
👤Better than expected! This is the best built and plastic free little carburetors I have ever owned, it even has a brass throttle piston, and every other one I have owned had a brass one. It seems to run smooth, but I can't say for sure.
👤I bought the racing carb for this engine because it had better results for the mountains. I can change out the main jets on these. For more fuel flow.
👤The trick worked well. She was adjusting well. This was put on a bike engine to replace the factory unit.
If you have a problem, you can contact them by email. The intake diameter is 19 MM and the air filter diameter is 58 MM. 80cc bicycle engine kit, 2 stroke engine parts, racing carburetor,2 stroke carburetor,motorized bicycle carburetor parts,70cc 2 stroke. The engine is 80cc, the bicycle engine is 49cc, the racing engine is 80cc, and the engine is 70cc. Reliable quality, easy to install, with a safety package. If you have any questions, please feel free to contact them by email, they will solve it for you in the first time! If you have any questions, please feel free to contact them by email, they will solve it for you in the first time!
👤The air filter is poorly made and doesn't have a glue to the cap to keep it from being torn apart by debris, so it wouldn't filter much of anything. The choke was poorly made, it has a lock-in mechanism to lock the choke until you get it full throttle in the mechanism, and the choke snaps open very hard to make a mechanism unlaw, so that you will probably end up snapping throttle cables in my mechanism. I don't know if I'll like the needle jet type or not, and I don't know how it will work out, so I'm not sure if I'll try the air filter or the carburetor. You need a special cable for the stock one, not the stock one. The intake manifold was casted aluminum. The description didn't say what type of jet was going to be in it, so I'm not sure if I need replacements or not.
👤The 5mm-70 jet is included in the Carburetor. Your ganna needs to re-jet it. I recommend a 65 or 63. Improved performance.
👤It hasn't even been put on the bike. It isn't blue, first of all. I have to paint my bike because I thought I was getting a filter to match it. Glue is used in connecting the base plate with the cone filter. Not good. It seems to be solid.
👤The pocket bike does not stay running after the installation of the Carburetor and the Engine breaks up and ceases to work. I've tried everything to solve the issue and nothing works. The bike runs like it should after I re-installed the original carburetor. The Jets are not replaceable on the new one and the bike ran very poorly because there were no adjustments on the carburetor.
👤It worked out great. For a while. Within a few hours, the Clamp for the Carburetor broke. I made sure I didn't tighten it too much. There needs to be a stronger design.
👤The carburator is more stable than the one that came with my engine kit, and we'll build it. It arrived quickly and was ready to use. I had fun with the speed and quality of the game. Would buy again.
👤It would fit my pit bike. But it didn't.
👤It was installed on my pocket bike. It ran properly after this did the trick. I did not get any performance increase from this one.
The length of the cable is 47 inches. The ATV chopper has a handle bar. The package includes a chain tensioner kit. The package includes a chain tensioner kit.
👤I recommend the stock tensioner chain that comes with your motorized engine bike kit, because it is a great product. I wish the screws/bolts weren't made of aluminum because I have had one snap on me, and I wish the spring had more tension to it. There is a Make sure your chain is tight before you install it because when you engage your clutch slowly at high speeds the bottom of the chain pulls on the tension wheel and if the chain is not tight enough it will cause slack in the upper part of chain. The installation process is very easy even though it doesn't have any instructions. The first step is step 1. The set up process is very easy to follow, I have found it easier to connect one side of the spring to the curved side of the mounting plate where the 2 small holes are. Only the small screw/bolt and locking nut are used to attach the tensioner arm to the mounting plate. There is a The spring from the plate to the arm needs to be connected.
👤It's one of the best upgrades for a motorized bike. It was better than the stock. You won't believe the difference it makes if you don't have one. This is the only upgrade you can do if you don't do any others.
👤Is it an upgrade from the cheap ones that come with the moped building kits? Yes. Did the arm bend on me while driving my moped, causing the chain to jam in the engine and send me flying? Also, yes. My chain tension was perfect, but I can't trust this one after that. The fact that the arm that holds the wheel is black is a good reason to not recommend this.
👤You can bend them by hand, they are thin and flimsy. It doesn't seem to provide enough tension on the chain so I drilled extra holes above the pre-drilled ones for a bit more chain tension. I have had to adjust the tensioner every time I ride. The roller bearings are better than the white/yellow ones. There should be a bearing on the pivot so there is not play in the tensioner arm, and the lock nut should be replaced with a nylon nut. I wouldn't recommend it due to the thin metal used.
👤I've been using this for 2 months. It still works like it should. I drilled a hole higher up to provide more tension. The product is great. There is a So far, so good. Just got it installed a few hours ago. The kit comes with a tensioner that I was using. The chain started jumping when it kept moving. Threw this on and took her around the block. I don't have any issues with the pedals hitting the bolts. It seems well made and solid in the first test run.
👤I would buy this again for the system I have going, but it is not a good design. There is a The pulley wheel and bearing don't spin with the chain. The purpose of having a bearing was defeated. It gets the job done at keeping the chain good. There is a The stock pulley is still an improvement, but it will wear out a little quicker because the pulley does not spin.
Bicycle engine kit 49cc products from Acouto. In this article about bicycle engine kit 49cc you can see why people choose the product. Yofmoo and Anbull are also good brands to look for when you are finding bicycle engine kit 49cc.
Acouto, Yofmoo and Anbull are some of the best brands that chosen by people for bicycle engine kit 49cc. Find the detail in this article. Uaus, Sthus and Uaus are also brands that their products are worth to check.