We promise to give you the best in customer care and a 100% product guarantee. If you have an issue with the item, please contact them by e-mail, they will try their best to resolve it within 24 hours. It is widely used on 125cc-250cc Engine Motorcycle Dirt Pit Bike Replaces N 100/604. The package has 15. Main Jets for N 100/604 26mm 28mm VM22 and VM26 are known as the X Carb. The Jets are engraved with it's number. The thread length is 5mm, the cap height is 4mm, and the thread size is M5x 0.75mm. Your trust is deserved with safe transportation. Your trust is deserved with safe transportation.
👤Some of the jets had no stamp on them, but they were shipped fast. I didn't have the 120-130 jet sizes for my predator motor.
👤The 130 jet has threads that are too small. There is a The jets included had the correct 5mmx0.8 threads. The 130 size jet had 6mmx0.8 threads, which is atypical for a metric thread size. The 130 size jet had 6mm threads instead of 5mm, so I ordered a replacement set. The 130 size jet is not usable because the threads are too large and don't match the rest of the set.
👤The jests had bigger thread pitches. The ones I needed had bigger thread pitches.
👤Excellent quality jets at an amazing price.
👤The set is good and comes with what I needed. A 135 jet was used for the Coleman 200u with a predator.
👤It's easy to make a mistake if you miss the 105 and get two 145. I was able to read the numbers. It seems like a good product and good quality.
The product has a 12 months warranty. Please contact them first if you have any questions. They can help you solve the problem. 1xGasket kit, 3xChain Master Link are included in the package. Brand new and high quality. The estimated receiving time is 4-7 business days. The estimated receiving time is 4-7 business days.
👤I bought them to put in a kit. I haven't used them yet. I can tell you that some of them are made of cheap cardboard and that the seller should use "DO NOT BEND" envelopes or put some stiff cardboard in the envelope to protect them. I didn't buy these to use full time. I bought them for emergencies. I hope I'm never stranded. It is worth the few dollars to know that I have a toolkit on the back of the bike with new gaskets, plugs, and master chains in case I lose my bike. There is a If you're just getting into owning these, you should order new piston rings so you can swap them quickly if you notice signs of wear on the cylinder wall, and you can get a cdi + magneto kit. Happy travels and cheers. You can ask questions.
👤This is the worst gasket kit I have ever received. Looks like an elephant chewed them up, stomped on them, and then they ate an alligator that was beaten with a sledge hammer. They were twisted by a man who was angry at his wife for cheating on him again. They were delivered by ACE-VENTURA. Never buy this kit again. It's the worst quality you could ask for.
👤The case gasket is made out of paper, not the one in the picture. This is not an advertisement.
👤It was supposed to be for 49cc and 66cc. It was not compatible with my 49cc, however it worked perfectly on my 80cc.
👤It was very flimsy and cheap to make. Metal reinforced the gasket to the muffler.
👤The head gasket was not copper.
👤The base gasket that I was looking for was torn just below the top, rendering it useless. 3 masterlinks is an add on.
The main nozzle of the set is #75-102(#75 #78 #80 #82 #85 #88 #90 #95 #98 # 100). The inner diameter of the cylinder is 50mm. It is compatible with the YD 100 Bottom End. Good only. The Yd 100 motor kit was replaced. 40mm Intake Manifold Stud Spacing is included with the Cylinder. The product has a 12 months warranty. Please contact them first if you have any questions. They can help you solve the problem.
👤This doesn't work on an 80cc motor. The yd 100 cylinder has a bigger bolt pattern. The stock cylinder is not the same as the stock cylinder. The reviews say it will work. I can assure you that will not be the case.
👤This is a nice replacement for my cylinder jug. My original was ruined when the clip on my engine failed. I put the new cylinder on and it fired up for the first time. Only for the YD 100.
👤The product had to do a little port work.
👤I had to clean up the mess, but it came pretty clean. I was surprised. I will definitely buy more through CDHpower if the quality keeps up.
👤One hole is completely honing out and looks to be filled with something.
👤serivce bought a cylinder that had an exhaust side issue that he had to have a replacement for.
👤The replacement part for the yd 100 is great.
You will get 1x inlet pipe Manifold, 1x air filter, and 1x carburetor. The PZ20 has a new aftermarket Carburetor. The ATV Quad Go Kart is a JCL. Chinese brands 4 stroke ATVs, Go kart, Buyang, Coolsport, Lifan, Kazuma, SUNL, Honda, Redcat, Eagle.50cc 70cc are all fit for. 90cc. 125cc 135 The ATV Quad Go kart is in Sunl Taao. Fit for most Chinese brands. 50CC 70CC. 100CC 125CC. The 49CC-125CC SSR Lifan Pister Pro Dirt Bike is compatible with the ATV. The Honda CRF50F is compatible with this. The Honda CRF80F was in use from 2004 to 2011. The package has a carburetor, gasket,O-ring,Fuel Filter, and air filter. The package has a carburetor, gasket,O-ring,Fuel Filter, and air filter.
👤I ordered this to fix my ATV. I call these ATVs value ATVs. Run them for a while until your child is done with them. The factory parts are worth more than the value. My son has been riding a 125cc for three months. One day it started to get a bit crazy. The value stock car has less features than the replacement one. The air filter on the car was cheap and it made the car dirty inside. The one I ordered had a new air filter. The PZ20 is used for these ATVs. Measure your intake as the PZ20 and PZ22 are the same size. The PZ20 is a bit larger. The machine runs great again after I installed a new spark plug and improved air filter. The air filter does not have an aux hose off shoot. Some of the stock machines have an air filter that is similar to foam. The foam filters have an aux air line connection in the drive case and an extension hose off the carb. Some buyers think this won't work for them because this one doesn't. The stock air filter will separate from the extension. The extension part between the air filter and the carb should be used once separated. These are not the most expensive or feature rich, but at this price, you can just replace the darn thing whenever you need it.
👤I bought this for my kids fourwheeler and it worked for two days. It only ran for a few hours before flooding out after I couldn't get it to start while it was cold. It was pouring gas out when it couldn't stop the flooding on the second day. I tried to open the float with the screws stripped. Looking for a better car. I guess you get what you pay for. Disappointed for sure.
👤A good cheap car. Put one on a pit bike and another on a China bike. Don't spend more. These work well. Even if it only lasts a year or two. Theyre!$15! If they leak. The float bowl is most likely not it. You can reuse the same needle off your old car. They let gas pass through because they did not seat correctly. Don't just remove the old cap from your car and make it easier to install. The new compass and big needle are useful. I currently use 2 of them but have bought 4 over the years.
👤This is a 70cc coolster. It's put together better than stock because it has better access to the bowl and float. I usually needed the choke on and the idle where I wanted it. I put the orginal back on after throwing the old one in the cleaner. I'm sure one of the jets is incorrect, but don't get others to try. 50cc to 125cc all on the same jet? Unlikely. If you have the bigger 125cc it would work.
👤I had to put a bent piece of tubing for the air filter in place because I couldn't get the cable through because it was bent. It's cheap enough to just order a new one.
The product has a 12 months warranty. Please contact them first if you have any questions. They can help you find a solution. The Outside Diameter of High Hole Piston kit is compatible with the new cylinder body. This combo is compatible with the standard 66cc/80 gas engine kit. The combo is a better replacement for the 66cc/80cc cylinder. The package includes: a new cylinder, a new piston kit, and an alum intake.
👤The heat sink was damaged when I received the kit, but the cylinder deck height was perfect, and it was egg shaped. I just dropped the kit off at the store and it was very easy to get another kit. I got a new kit a few days ago. The new kit is a good one. I will have to cut the deck height down a bit. The ports are very rough and need to be cleaned up. If you want to experiment with making a windowed piston, ramping the piston or trimming the skirt, the company won't sell you just the one, which is bad because you want to be able to buy another one. You can't buy a stock replacement for it. I found a seller on eBay that sells a 49mm piston and I ordered one from them. I want to experiment with some modifications. If the company is selling this kit, they should also sell a windowed piston for it.
👤She cleans up good, but the head gasket looked like it was beat with a hammer, so I had to throw it away.
👤The first real test of the kit was a failure and they want me to buy another kit. No thanks.
👤I appreciate what these people have done. It is needed. Extra pistons and titanium wrist pins would be nice options. Excellent. All the best.
👤You said in the description that it wouldn't work for the lz crank. I can't use them because I bought 2 of them.
👤The sleeve was never made. The rings are made of metal. The upgrade was a disappointment. It was a waste of time and money.
👤The bottom end of the cylinder cracked as well. No damage to the motor. I would love to get a refund.
👤If you can't do it, don't buy.
Low smoke maximizes performance. The big bore kit will upgrade your gy6 50cc 60cc. 80cc to 100cc, without EGR, can get more power and speed. There are two versions, 64mm and 69mm. Before ordering, please confirm. Installation is easy with racing AC CDI, spark plug and ignition coil. You can upgrade your 50cc Scooter with this upgrade.
👤Straight forward. I used to own a pony. The stock exhaust, A9 cam, 50cc-100cc carburetor, and aftermarket air filter are used. Sounds better now. 64mm valves were the ones mine had. There were no other modifications needed to use the 69mm head.
👤There were 2 installed on short case peace sports. Talk about speed after being upgraded from 50cc to 100cc. I red lined the engine after blowing it on the second test run and noticed my speed was over 50. 2nd short case no issues. I told the owner to break in the period for 250-300 miles in the engine.
👤First install was perfect. Everything fit to specifications on my 50cc block. I have put over 2k miles on it and have no issues. Will buy another one to put on my other scoot. Definitely recommend this.
👤The moped went from 0 to 40 in a dime. It increased my take off speed.
👤It works great and all mechanically sound, but my head gasket blew and the gasket between the jug and base leaks oil wouldn't seal.
👤It is easy to install, but have patients and attention to details, and oil pump sprocket had wrong teeth and center, all else fit perfect.
👤I need a replacement for my only mode of transportation and I am angry that the head dropped the valve, I need to do a rebuild again. I would like to know if someone would call me about this, my transpotation is a pile of metal.
👤This is the second kit I have bought from them and they are great, it is high quality and comes with everything you need and more, just make sure to get the right valve length.
The BH-Motor ALLOY is a motor alloy. Pull Start Starter for 66cc and 70cc. 80cc 2 cycle engine motorized bicycle. For 2 stroke gas motor kit, Excluding Motor. LD 100/68CC/80CC/100CC. It is complete parts for building your bikes, 36T or 44T, but only accessaries and parts set.
👤I ride a motorized bike almost daily for the past 5 years and I don't think I've ever seen a better deal. You get 5 stars from me.
👤I didn't like the lower price but no motor in the packaging. Then had to return it. It seems like they gamble on people not sending it back and then buying a motor from them.
👤If you only need to refresh the secondary parts of your motor, this is a good kit. If you piece it together you will save money and be able to get better parts than this bundle, but it was okay for me. It should be less expensive for what's provided.
👤Everything for a kit rebuild.
👤The motor was difficult to mount on a bike.
The product has a 12 months warranty. Please contact them first if you have any questions. They can help you solve the problem. Your horse power will be increased by letting your engine ride cleaner. The replacement part for the CAG pocket bike is Chinese. It is the most effective way to increase engine performance, gain horse power, and increase speed. The design of this kit is for racers who want to add top performance to their bikes. Your horse power will be increased by letting your engine ride cleaner. MTA-1 ( Cagllari), MTA-2 (MX-3), MTA-3 ( GP-RSR), 4 Wheeler ATVS, MTA-4 (A-4 Quattro), S4- Cobra, Evolution, Blade, Raptor, Giovanni and Zemmi are replacements.
👤I rejetted it for my motorized bike and it worked well. I went down to a 57 main jet, which seemed crazy lean, until I realized that it was 50cc mopeds.
👤The little motor was good but not the right part and returned with no issues.
👤Only the pump of the throttle could get the car to start. The pin was wrong.
👤Accidentally bought it.
The ring is 2mm, the pin is 10mm, and the hole is 10mm. Everything needed in order to assemble a motor bicycle is included in the 80cc 2-stroke bicycle motor kit. It's for most bikes with V-frame, such as mountain bikes, road bikes, cruisers, choppers. The electric motorbike kit has a single cylinder, air-cooling, 2-stroke 80cc single cylinder gasoline engine. It is made of first-rate steel material and has great strength and endurance, which can provide you with a long service life. The Capacitor discharge ignition method is safer and more stable than other methods. This type of ignition will not cause the wear and tear on the contact points when the bike engine is spinning at high speed. The design makes it easy to put together a bike, riders just need to fit the motor to the frame, connect the cables, and fill up the gas tank in order to be ready for their first ride. It can speed up to 50 km/h. It is almost as fast as a motorcycle or scooter. Your motorcycle can have better endurance with a 2L fuel tank and a single cylinder gas engine. It can speed up to 50 km/h. It is almost as fast as a motorcycle or scooter. Your motorcycle can have better endurance with a 2L fuel tank and a single cylinder gas engine.
👤The quality of these little engines is poor, but they are fun if you have mechanical skill. There was a bad seal on the crankshaft and a bad bearing in the clutch gear. If you want to learn how to port/polish and mod your engine on a 2 stroke, then this is the engine for you, it's cheap and you can get 35-40 mph out of it. The hardware is cheap and will round out if you breathe in the wrong way. It takes a couple days to build this, so do not expect it to be built in 4 hours.
👤I received my package and waited until I bought a bike to put it on, now I'm ready, but I need to send the metal pieces to the rubber rings so I can use the product I paid for.
👤The mounting studs were twisted off on the 1st motor. It doesn't look like the pictures. There were no stickers. It is not an upgraded version. When I took the clutch plate, the wheels were rusty and the motor was half spray painted black. The small 6mm screws are easy to strip. Too much money for a low grade motor. It can either be used or refurbished.
👤The engine runs well but the parts themselves are cheap, the speedometer parts didn't match up, and a lot of the bolts broke.
👤The engine does not work well. It is not as powerful as other 88cc engines. The kit is the same as the other engines. Something is not right with it. I'm going to try and get something from other suppliers.
👤I was very happy with the product, everything was there, nothing was scratched or damaged, black paint was very nice, and I recommend anyone who gets this project to watch a lot of videos and pay attention, you will have a great running bike. According to the speedo app, mine goes around 25.
👤wont start. There was no compression. The motor is faulty. I had it in a box for a month before I had a mechanic put it on and give me the bad news, so they won't take it back and give me a refund.
👤I didn't like that Amazon lied to me about the bike conversion kit I purchased, and that they liked three different customer care representatives. I had to buy a bike. The motor is still under the bed.
90-day money back guarantee and one year warranty are provided by them. If you encounter any problems with your money, they will replace it. The metal material is good, do not worry about the oil leaking from the fuel tank. The length and width of the gas tank are listed. The package contains a gas tank, a gas tank cap, a petcock, a fuel filter, a fuel line, clips, and a gasket kit. Please check for the details and size to make sure this part will fit. Please check for the details and size to make sure this part will fit.
👤I love this tank. When I got the petcock, the threads were rusted. I used oil and a wire brush to clean them off and put a coat of clear coat on it to keep it from rusting. The mounting brackets are much better than the stud type mounts on other tanks, but on thinner top tubes you may need to use some rubber to get it to stay on, I used some strips of old inner tube to get mine secured.
👤I like how it fits on the bike. I had to buy new screws for the back of the tank.
👤The screws had to be cut. The bar is too wide.
👤Like the tank. They sent nuts that were too small to protect the studs. I mounted the correct size nuts in my garage. The hose "clamps" they sent are useless for the fuel line sent, they spin freely even on the hose barbs. Would not buy again. There is a lot of junk.
👤Disliked the quality. Bolts were small for the screw. They got the bike done and the last item, threading in fuel peacock, broke off. Don't buy it.
👤The mounting bolts don't fit the nuts. Didn't have lock washers. The gas tank is smaller than expected. It will do the trick.
👤The mounting holes are on the opposite side of the gap. They are close to each other up and down.
👤Bolts were not the correct ones. The picture shows that the on/off position for the gas is in the wrong place, which could cause a danger if you needed to turn off the gas quickly.
We will give you a satisfactory solution if the product is faulty. For 70cc and 90cc. The Coolster Go kart has a 125cc 4 stroke ATV. The 5 Pin AC CDI Box has a spark plug. This is a note. This kit is not compatible with the gy6 design engine type. This is a note. It comes with a wiring diagram. It is highly recommended to have a professional installation. They are not responsible for false assembly that may cause trouble starting or even cause a fire on the harness, so better take it to a shop. Maybe some plugs of the harness are different from the original parts. This is a note. It comes with a wiring diagram. It is highly recommended to have a professional installation. They are not responsible for false assembly that may cause trouble starting or even cause a fire on the harness, so better take it to a shop. Maybe some plugs of the harness are different from the original parts.
👤I am trying to find out if my existing multi function switch that includes wiring for lights will plug in without damaging anything or if I should just run that system off. It would be nice if the multi function switch was used instead of the other switch. This is an ATV with a loncin engine. The product is great, everything works as it is supposed to.
👤I liked how easy it was to install the clean products.
👤It wasn't on the package that I needed it for. If I already paid for it, I don't know how to get it.
👤It wasn't rated for my buggy, but all the connections were wrong. I had to use wire from it to fix the harness I already had.
👤There were no instructions.
Bicycle engine kit 4 stroke 100cc products from Mingdun. In this article about bicycle engine kit 4 stroke 100cc you can see why people choose the product. Hgc and Cdhpower are also good brands to look for when you are finding bicycle engine kit 4 stroke 100cc.
Mingdun, Hgc and Cdhpower are some of the best brands that chosen by people for bicycle engine kit 4 stroke 100cc. Find the detail in this article. Autokay, Cdhpower and Rutu are also brands that their products are worth to check.