The iron sleeve cylinder has advantages. If the goods are lost or damaged, please do not return them. They will give you a good after-sales treatment. This kit is a front wheel conversion kit. You can install a disc brake disk according to your needs, but not a flywheel. It's much cheaper to buy a high-quality conversion kit than to buy a complete electric bike. The timelines guarantee. You can get the same high-quality products in a shorter time if you shop at their shop. The electric bike conversion kits do not include batteries. The battery needs to be bought separately. The motor kit can only use batteries with the same voltage as the motor, and the only way to do that is to use a Li-ion battery.
👤Excellent product. I had a lot of fun with this bike. I needed to get some things done in the rough weather, and this thing did the job. I could climb the hills with no problem. The motor could have done the climb on its own. I set the speed limit at 30 mph, but I'm sure I could have gone faster. I think my only complaint is that I would have gone with a thumb twist acceleration grip. If I'm not careful, I'll cause an accident. I thoroughly enjoyed the product. There is an update. I have not had a bike with the conversion kit in about 4 months. I have had a great time with it. The conversion kit is so modular that I was able to easily replace the damages that I experienced. The seller's product support team was able to correct the glitch that did not show my speed. There is a The kit on its own is a great value, but the fact that there is a dedicated technical support team to help fix it adds value to the product.
👤A great help to get around on a bike.
The item has a panel with a display that supports a number of functions, such as a riding speed display, battery status, power assist adjustment and more. The motor has a power of 500W. The speed is 16-22mph (25-35km/h). Enjoy cycling while driving an electric bike with a max load capacity of up to 150KG. Motor works under Hall effect and non-Hall effect, extend life for electric bike, and Brake levers cut off the power supply to the motor safely. Includes the components you need for a full conversion, including Rear Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties, and Plastic Coil. The battery is not included. A 36 Volt battery with a nominal capacity not less than 10Ah is required.
👤The motor exceeded my expectations. There are some things that I don't know about this recommendation. The motor is quiet and smooth and can get you over the hills without the help of the rider. I built a crank forward bike that I mounted this kit on and am using a 36v battery. S.l.a. batteries. Even without the motor running, the bike doesn't peddle too bad. The twist grip throttle is what I have hooked up. It will do 15 miles with minimal help from me and will hit 25 m.p.h. On the ground. I had no idea that I would get so far on the charge. There are serious cautions to be taken on this project. The rear triangle spread of 140mm was required before I could get the wheel in place because the motor's axle is very wide. I used a small scissors jack to spread the triangle. I have done that many times. It works well on STEEL frames if you try a little and measure progress before adding more force. Before mounting a tire and a tube with longer valve stem, the rim should be covered with a good cloth rim tape. I wouldn't try to use the tire that was included. I put a lock on the spoke nipples after I noticed that they were well tensioned. I swapped the 7 speed cluster for a 5 speed as the 7th sprocket was too close to my right dropout and using a 5 speed cluster allowed a better chain line. The hole in the freewheel tool needs to be at least 15mm dia. A machine shop can drill over the fat axle. It is not hard. The rest of the installation is pretty straightforward once you get the wheel and cluster. The installation book is useless because I didn't connect the blue speed limiter wires together, but everything works once connected. I ran the 36v line to an in-line 20 Amp automobile fuse and then through a standard 110v light switch before the red wire connected to the controller. I gave this 5 stars for value and exceeding my expectation of performance, but caution because some effort is required to make it fit.
👤I was asked to rate "sheerness" and "thickness". Is that the 4 dtars I gave? There is a This is my trike before. This machine was already 65 lbs. It has gained a rear fender assembly that is all steel and can support a passenger easily, fold out baskets, headlights/mirrors/turn signals, and the motor assembly. It is now at a flat 100 lbs. There is a This is the first electric motor I have used. I thought after the first ride that I needed a stronger motor. I wasted money. I told the seller about my symptoms. He decided I had a bad motor controller after making me jump through some hoops. First symptoms Yes. I felt a push. It made me go a bit better. It would stop working after a few minutes. My battery consumption was much higher than I expected. I thought it was stressed out by the huge weight of this machine and my 200lb carcass as opposed to a standard lightweight bicycle. There is a The seller said no. I believe you have a bad motor controller. He had another person shipped out. There is a He was right. There is a I need a second set of batteries, but this unit will pull me away from a stop on level ground, and build speed to hit a cruise speed of about 15-17mph with absolutely no pedalling. There is occasional cargo on top of that. No hills are beyond my reach. If I need to, I can easily maintain 25 mph on level ground. There is a So... There is a Thanks to the seller. There is a Everyone has a lemon. There is a If you make it right, that matters. There is a He did.
If you see that the product is faulty, please do not return it. Please contact my store customer service as soon as possible, they will send you the missing accessories. The front hub kit is 36v. The electric bicycle kit has a brushedless geared bike motor and front wheel. Also, note: The battery is not included. ) The Motor ebike conversion kit with headlights and button switches makes it easier for you to ride in the night. The controller box is waterproof and has front bicycle wheels. The pedal assistance system 8 is more sensitive and allows you to ride without the need for a motor. The e bike conversion kit has a G51 display and offers a number of functions. Don't replace your Twist Throttle grip with the use of thumb throttle accelerator. The power supply will be disconnected immediately if the controller senses the brake signal. The Electric Bicycle Wheel Kit is easy to assemble. The electric bike conversion kit has everything you need to convert an electric bike. The Mountain Electric Bicycle front Wheel has a 100mm dropout and includes a Motor Controller, controller box, pedal assist crank sensor, and one pair of brake handles. The battery is not included.
👤I put the hub on the rim that matches the rear rim of my bike. The rim on my bike is larger than the one that comes with it. I installed the hub, controller and battery myself after ordering new spokes. I used a 36V battery. I didn't install everything in the package because I didn't want the bike to look like an electric bike. I only installed the screen and throttle. I have less wires on my bike. The motor makes a weird sound when I start, but it goes away when I get moving, I'm not sure what the sound is, being that I just finished and only rode it once. It was very easy to build a new wheel with the electric hub. I feel bad for people. People have a hard time doing things. If you can't install a screen protectors on your phone, you won't be able to convert your bike into an E-bike.
👤The conversion kit was delivered 2 days earlier than I expected. That part was good. I have no complaints about the components so far. Don't expect much help with the instructions. I tried the setup before mounting the components. I connected the wiring to the bike after mounting the display, brake levers, throttle and other items. It won't work now. The display is showing an error that means motor failure. The setup was redid with the "learn" wires connected. It seemed to work again at that point. After getting out of setup, I tried again, but nothing. Kunray says there is a video about the installation on Youtube. I can't find a video like that. It doesn't work so far. I'm going to contact the vendor to get more information on the instructions. There is more to come. On the day I wrote the review, I sent 3 emails to the vendor, but they have not responded. I made more attempts to get the system to work. The motor will work at the 5 levels of pedal assist if I leave the learning wires connected. The motor stops working when the brakes are applied, the pedal sensor is not functioning, and the throttle is not working. The controller is bad. There is a The motor is very weak. The maximum speed achieved at the level 5 pedal assist is 10.4 mph, with no load, if you lift the rear wheel with the bike stationary and turn on the motor. I will not purchase from this vendor again.
👤The instructions are not usable. I got my kit working after some trial and error. I would recommend this build. My build is on a TREK mtb. The 48v 13ah battery has no issues. The range is 30 miles per charge and the average speed is 20mph. Nice! Good idea to have some experience in this field. I wouldn't recommend this for a first time build.
👤I've taken it out on the road about 6 times so far and I'm happy with it. It wasn't given instructions and had to watch a video that was vague in some areas, but eventually got it figured out and worked on my bike. 2. The digital controller went blank when I took it for my longest ride because the battery had 30% left. I disconnected the battery and the controller blanked for about 1/2 mile. I don't know why. Good news 1. I was able to go up to 28 miles an hour. 2. It was quite a few. It does not restrain peddling without it. I'm happy with it so far, except for #2 which I have to figure out why it shut down.
The engine used in the kit has an automatic clutch. 1. You can receive goods faster if you use Amazon's services. If you have a problem during use, please contact their store customer service first, they have experience and can provide you a solution. 2. They use the Kunteng Control System, please don't replace any of the accessories without consulting their store customer service. The Hall controller can start quickly and smoothly from the beginning. 3. Their products do not contain batteries or inner and outer tires. Only bicycles with tire sizes 24*19.95-2.125 are suitable for this product. The display has a 4.KT-LCD8H color panel. The display battery percentage, speed, distance, power, and possible error codes can be used to find out more about the problem. There is a manual in the display package. 5. The motor has a maximum speed of 45 km/h. If you want your fork to be installed, you need to make sure the front fork is 100mm. 6. Installation: This product can be used to convert ordinary bicycles into electric bicycles. It is hundreds of pounds cheaper than buying a new electric bicycle. The modification takes 1-2 hours for one person to complete. If you don't know how to install the kit, you can ask a friend or a bicycle store for help. The kit should not fail to work if the parts are in good condition. 7. If the parts are damaged or lost due to logistical reasons or the product is found to be faulty, please do not return the goods. Please contact my store customer service as soon as possible, they will send you the missing accessories.
👤I bought this for my mother in law. The instructions were vague. The brakes did not work. There is a The Maker would be available in three days. I drove down for 6 hours on the weekend to assemble this. I was surprised by the reviews on this. I wouldn't recommend this to anyone.
👤I use this on my 3 wheel bike. I have hit speeds of 27mph but it is frightening. I think I might change the thumb throttle to a twist, but only because my handle bar is too big.
👤This was installed on an adult trike. It exceeded all expectations. I highly recommend it!
👤The electric drift trike goes 29 mph.
The KT-LCD3 display has a number of features that make it easier to figure out what's wrong. There is a manual in the package. It is easy to convert a pedal bike to an electric bike. The set of products has two riding modes for you to choose from, which can fully satisfy your exercise and commute purposes. Both 48V500W and 36V500W can be used. The 48V500W motor is powerful and efficient, which improves riding comfort. It can be used for station wagons, commuter vehicles and mountain bikes. The KT-LCD3 display has a number of features that make it easier to figure out what's wrong. There is a manual in the package. Give you a better riding experience. The complete accessories include the rear motor wheel, controller, cut off ebreak, thumb throttle, purchased controller, and the extension cable. The motor is provided for a year. The period is 3 months for all other components. Technical support and hassle-free returns are provided by them. It is very convenient to contact the factory directly if you are the source manufacturer. They work hard to make sure you are satisfied with their services. The wheel is 24.0 inches.
👤It is terrible and all about the controller. You will be McGyvering it. It will be poor at best. Go for something complete from a company like rad bikes or something similar.
👤I decided to convert my mountain bike to Electric instead of buying an E bike. This was the best purchase ever. I took it to a bike shop and they put everything together for me for about $200, and then I had my old bike fixed. The bike was raced against it by the installer and he said mine won.
The SW900 display supports battery capacity indicator, brake status, speed display, trip distance display, motor power, parameters and temperature display. 1. You can receive the goods faster if you use the Amazon service. If there is a problem with the product, do not return it. Contact their store customer service first. The factory has been open for 9 years. They will give you a solution that will satisfy you. 2. They use the Kunteng control system, please do not change any of the accessories at will, you can consult their store customer service if you have any questions. They use a Hall controller that can start from scratch quickly and smoothly. 3. Their products do not contain batteries or inner and outer tires. Only bicycles with tire sizes 20*19.95-2.125, 24*19.95-2.125, 26*19.95-2.125,27.5*1.95-2.125 are suitable for this product. The display is 4.KT-LCD3. The display battery percentage, speed, distance, power, and possible error codes can be used to find out more about the problem. There is a manual in the display package. The motor is 5. The 48V1500W motor has a maximum speed of 45 km/h. If you want your fork to be installed, you need to make sure it is 100mm. If you see that the product is faulty, please do not return it. Please contact my store customer service as soon as possible, they will send you the missing accessories.
👤The controller has a power rating of 17 Amp. This unit is 800w and has a bunch of 1500w stickers on it. The components have 800w ratings.
👤This is a game-changer for anyone that needs pedal assistance. My details can be found below. I am a disabled female, 36 years old, who lives in a very hilly rural area, used on a Tricycle that was heavy framed. There is a Lots of power. The guy from the bike shop that was checking it out said they usually use 800w for these kits, but this is a great one. To make sure it slides up on the frame, be sure to check the front axel width. Have not needed to add disc brakes to this. I was worried at first. There is a The top speed so far is 29 mph. I've gone over 20 miles on one charge with lots of hills and it hasn't died on me. I've been using it for about a month. The motor knows when to stop assisting and when to stop pedaling. This prolongs the battery a lot. There is a Cons pedal assist is very complicated and doesn't work with my pedals. Everything still works well even though we didn't use that part. The throttle is used to assist me. The bike shop guy said that they don't hook them up for people anymore because they are so difficult to use. Instructions are not helpful. Common sense was used when we searched for many different videos.
👤I received the kit after 2 months. I ordered in advance of my son's birthday and it arrived the week before. I was really impressed with the second ebike conversion I have done. The quality. The wheel is in the box. The bike has top speed on it. The speed is measured by my phone's gps receiver. Changing the knobby mountain bike tires out for smooth road tires would increase the top speed by a bit. I have a lot of fun with this bike and it is for my son. The ride is an adventure. The plugs for the wires are too large to fit the Torque sensor over, so I have to use a different method. It is easy to remove the wires from the plug if you are careful, just slide the arm over and reinsert the wires into the plug. It is very easy to ruin it if you don't know how to pull the wires from the plug. I haven't installed the pedal assist sensor yet, I have only been using the throttle with wires hanging out. I hope to finish the whole thing soon. This is a great choice for one of the more powerful kits to be available at a lower price. I'm considering going with the 26" version of the kit for my bike. I wish these were in the U.S. This is the battery that I am using for the kit from Amazon.
👤The motor stopped working when there was an audible 'pop'. I don't know anything about a circuit breaker. Any help would be appreciated.
The package includes: rear motor wheel, controller, electronic brake lever, and switch. Without battery. There are power-assisted mode and pure electric mode. If you only need pure electric mode, it's very easy to set the P4 inch on the display. It is easy to convert your bike to an electric bike. This set of products has two riding modes for you to choose from, which can satisfy your exercise and commute purposes. The 48V1500W motor is powerful and efficient. It is suitable for station wagons, commuter bikes and mountain bikes. Rear motor wheelx1, controllerx1, cut off ebreakx2, Twist throttlex1, purchased controllerx1, extension cablex1, and flywheel and cable tie. The KT-LCD3 display has a number of features that make it easier to figure out what's wrong. There is a manual in the package.
👤A mountain bike has been converted. I wanted an e-bike that would fit my size and I am a big girl. After a lot of research, I chose this kit. The biggest battery I bought was able to handle it. I was not disappointed. The bike is powerful and fast and the battery lasts a long time. After an hour of riding it, my battery is only 50%.
👤I bought 2 of the kits for myself and my wife. The kit is very fast. I was able to top out at 39mph. I have a 48v 20ah battery and it is compatible with my kit. If you put the Torque arms on the hub motor, you risk wearing out the drop outs on the frame. Great kit and great seller. The seller stands by their product.
👤I wanted to convert my almost unused bike to a hybrid bike because it was heavy for climbing Hills and I needed a set of tools to replace 7S Freewheel.
👤Excellent kit. It took some time to install. I enjoy it a lot.
👤I converted my mountain bike to a 1500 watt motor and was concerned that I should have bought a higher watt motor. This thing takes me at 33-34 mph as far as I'm able to ride it. I can't say enough good things about this product, it's easy to install and it's very quality.
Before purchasing, please check the size of your original one. The bicycle engine kit has a speedometer. The bike engine kit fits most men's bikes with a V-frame, at least a 8.5" height clearance for the engine. The universal mount may be required for large bikes. The mixing ratio for gas and oil should be1:1 for the first 300 miles. It is important to avoid a motor lock up. The 80cc bike motor kit has a single cylinder, air-cooling, 2-stroke engine. The motorcycle has synthetic 2 stroke oil. Please use premium quality oils to prolong engine life. The air cylinder should be lubricating before it starts. 2 stroke bike engine kit has a maximum power of 2.2 kilowatts and a rated power of 1.5 kilowatts. The universal face plate is required for the larger frame size. There are notes. If a new car is leaking oil, take apart the bowl and bend the claw down a little to fix it. Remove the cap if there is no spark plug. The 80cc engine kit air cylinder might take a while to adjust to the load. Please limit the riding time to a maximum of 1 hour for the first few rides to avoid any problems with the motor. There are notes. The motor needs to be maintained after riding breaking time. Premium quality screws and bolts have been upgraded to improve performance. There are notes. The rider needs basic hardware skills, tools, and hours to install and fine tune their vehicle. If you don't have experience or the first time, please read their instructions and search "80cc bicycle engine kit" on the internet, it will give you a lot of help and help you fix the issues during installation process.
👤If you don't know what to do, just go on to the video and see how easy it is to put it together. There are lots of videos about these motors. I had a problem with my bike when I put gas to it, but I just put the tabs on the float and it solved the problem. I recommend red Lock tight and if you don't have an innertube try to find a old one, it's a lot of fun and you should buy it again.
👤Installation was simple and all parts were correct. It was easy to start up. The engine began to clunk within 1 minutes. The bike was stopped to examine the housing. The nut was loose and the tread on the shaft was stripped. The threads were fixed and the nut secured. I tried to start again, but couldn't. There was no spark being sent.
👤It's cheap and it's worth it because parts are all over the place. They all have a washer or 2. Overall 3.5
👤I was completely satisfied with this kit. It took me only a few hours to build it and it exceeded my expectations, it is one of the best things I have ever bought.
👤Good motor. It's better than the last brand I had.
👤The setup chain was too short and the clutch lever on the left side of the engine was short. The speedometer won't connect to the bike.
👤Fue un poco complicado de armar.
Mountain electric bicycle rear wheel with 135-142mm frame dropout is a good candidate for application. It's suitable for 20in/24in/26in/27.5in/28in/29in/700C mountain bikes. The maximum speed of the motor is 60 km/h, it is 36V or 48V and it is high quality. The display shows battery power, time, speed, mileage and gears. You can enjoy cycling while driving an electric bike with the Pedal Assistance System.
👤The kit was put up yesterday. Went for my first ride. The trail is mostly gravel. The day was a 7 mile ride. A few spokes came loose as the wheel started to wobble, but they were just swinging. The rest of the ride was slowed down to about 5 mph and the tire popped as it was crazy swerving the entire bike back and forth. I walked the last few miles back to the ride at night. I counted 10 spokes that were completely disconnected. The machine was fun for the first couple hours, but it didn't last for a full ride so I'm going to have to give it a complete star. I spent more time installing than riding, hoping customer service will fix the issue with a stronger model or full refund without a lot of hassle. I might try a mid drive. I am addicted to the ebike and I was laughing so hard I couldn't breathe.
👤The kit is working well so far. I only gave it 4 stars because the washers were put on backwards. The tab washers are supposed to sit on the outside of the rear dropouts. The tabs were facing the outside of the dropouts. It's an easy fix for the no cable side of the wheel. It's a different story on the cable side. The washers won't slide over the white hall, so you have to remove it and put the white hall back on. There are small tabs on the sides of the contacts that you have to push in with a small screw driver to get the connector off. You have to use a screw driver to pull the tabs out and then push the contacts back into the connector. If you try to put the kit on with the washers facing the wrong way, the tab on the drive side washer will hit the derailleur hanger, which is dangerous.
👤Excellent: Excellent quality rim. Hub seems to work well so far. Bad. A few of the spokes were loose and I spent a couple of hours trying to get it right. There is a The 7 speed cassette is junk. There is a I can't complain about the money. I've been working on bikes my whole life. I might feel different. If you do buy this set, I would suggest you go to a local shop and get it trued properly. Check your spokes when you get a few miles on it. Over time, the Torque will loosen them.
👤This product is found to be faulty after completion of assembly and installation. The seller might want to verify that their product works.
👤I can only say that it is amazing. I haven't ridden it yet because I just installed it. But man, oh man! I put it together in about two hours. I had a few issues with the bike I used. I was able to get it going. The hold up was the wheel install. It was easy to get it in the install. I did not test until I was done installing. Everything worked as it should after I hit the on button. I have to find a way to connect my battery. I used a different battery to test the install. I will update if need be in a few months. This thing is very fast.
The wheel is 26.0 inches. It is easy to convert a pedal bike to an electric bike. The set of products has two riding modes for you to choose from, which can fully satisfy your exercise and commute purposes. Both 48V500W and 36V500W can be used. The 48V500W motor is powerful and efficient, which improves riding comfort. It can be used for station wagons, commuter vehicles and mountain bikes. The KT-LCD3 display has a number of features that make it easier to figure out what's wrong. There is a manual in the package. Give you a better riding experience. The complete accessories include the rear motor wheel, controller, cut off ebreak, thumb throttle, purchased controller, and the extension cable. The motor is provided for a year. The period is 3 months for all other components. Technical support and hassle-free returns are provided by them. It is very convenient to contact the factory directly if you are the source manufacturer. They work hard to make sure you are satisfied with their services. The wheel is 24.0 inches.
The headlight base is high quality and suits all kinds of bike. IPX6 waterproof, resist against splashing water in rain. If dropped carelessly, shock-resistant does not matter. Reliable protection, practical design, and durable quality. Not only does it keep you safe from unexpected pot-holes, debris, and any other hidden obstacles, but the additional loud bike horn also notice to everyone add as a secondary on the streets of your cycling. The default parts of the one electric fat tire bike conversion kit are motor with wheel, controller, display, brake lever, Thumb Throttle, and gift. The battery and tire are not included. The whole kit uses the KT system, so if you don't use it, other parts won't match the kit. The price for one electric bike conversion kit will be cheaper than the whole electric bike. Installation will be easy if they provide the installation introduction. You just transfer the original tire from the bike to the prepare motor and link all components. The installation will be done. The installation introduction was attached to the kit. Important parts include: rated power: 1500W, rated speed: about 50 km/h, fork size:135-142, and brake type: They will provide you with 100% qualified products and quality services. If you have a question about your kit, please contact me. Please contact me first if you can't get the refund because some parts broke. The 1.75-2.125 tire was matched by the 1500w brushless non- gear motor.
Bicycle electric motor kit 29 products from Schuck. In this article about bicycle electric motor kit 29 you can see why people choose the product. Voilamart and Kunray are also good brands to look for when you are finding bicycle electric motor kit 29.
Schuck, Voilamart and Kunray are some of the best brands that chosen by people for bicycle electric motor kit 29. Find the detail in this article. Ubrand, Ezkt and Changzhouqingmudianzishangwuyouxiangongsi are also brands that their products are worth to check.