Best Bicycle Electric Kit

Electric 29 Sep 2022 10+ Comments Open

1. Electric Motorized Conversion SIDE MOUNTED Cheapest

Electric Motorized Conversion SIDE MOUNTED Cheapest

The brush motor is for a bicycle. The model has a 36 watt DC output and a 250 watt Sprocket. If you want 350W, please click another link. BR> BR>

Brand: L-faster

👤My daughter tore apart about 5 different bmx and mountain bikes trying to get them to work together. It won't work with anything you have. You can save money by buying a real electric bike.

👤A lot of parts are missing. I tried to put it on my bike.

👤It took me a long time to get to me, because the board did not work.

👤The product seemed to be of good quality, but I didn't receive an email invoice, part listing or paperwork.

👤The plate did not have to be my own.

👤There are some poor quality parts in this kit. The controller, light/horn, and axle were all pretty bad.

👤A few bits burned out quickly.

👤All items were described as expected. The problem is that they did not provide me with the necessary wires to connect the battery to the controller. You will need to buy wires and connections. The instructions are useless, and the only instruction you get is a picture. A 6 speed cassette or freewheel will not fit work with the adapter provided if you have a single speed freewheel. If you don't mind the tedious process of assembling, wiring, and spending more cash on necessary parts, then you should. If you want a better kit, then this product is ok for you. This kit is not very friendly for beginners.

👤No venga con un display especfico est bastante, aunque haya. The principal problema is a motorizar un patinete de ruedas de 16. Esto invertir el sentido de rotacin del motor. No aparece en ningn documento. Sera tranquilizador, se pudiera, con las instrucciones del constructor.

👤Kit facile, s'est pas s'est pas s'est pas s'est pas s'est pas s'est pas s'est pas s'est pas s'est pas s'est pas s'est pas

👤The pice indispensable is impossible d' utiliser ce kit. Aucune notice of the event. There is a Le vendeur J'ai renvoyer le tout et demander un remboursement.

2. BAFANG Chainring Electric Brushless Bicicleta

BAFANG Chainring Electric Brushless Bicicleta

The BAFANGBBS02 mid drive kit is compatible with most bikes. It can be installed on many bikes, such as mountain bike, road bike, commuter bike, folding bike, etc. They don't recommend to mount it on the bikes with carbon fiber frame or costaer brakes. If you're looking for a 750W mid motor for 100mm bottom brackets, please search B099Z8Y6QN on Amazon. The bike motor kit is very powerful. The max Torque of BAFANG is 120 Nm, which can provide you with super power to ride. You can cycle on the road or climb the mountains much faster and easier, which is great for the old, as it makes life much easier. You can choose from e-bike, pedal assist and electric bike riding modes. The eBike motor can make your cycling trip more exciting. Easy installation. If you are still confused about how to install the electric motor kit, please send them an email. Please email them if you don't know if the kit fits your bike. They will help you make sure you enjoy the conversion kit without spending time. A wrench and crank removal tool are included in the box. The packing list. A 750W motor, a battery, a display, a chainring with guard, brake levers or brake sensors, cranks, a thumb throttle, lock nuts, and a 1T4 EB-BUS cable are optional. Please don't worry about missing part when you find it in the box. They will help you figure it out if you email them. Just place an order and enjoy the ride. Global Warehousing and customer service. You can expect to receive your packges in 7 days. If there is a problem with the inventory, they will send you an email, please keep an eye on your Amazon inbox. All products have a one-year warranty. They have professional technicians in the US who can help you fix the problems. How to contact them on Amazon.

Brand: Bafang

👤I watched a lot of videos before trying to install on my mountain bike. I made sure my lower brackets were the correct size. I bought a crank arm removal tool and found out that the kit came with it. I bought a universal chain tool and a programming cable to adjust the default parameters in each pedal assist mode. There are videos on the internet. After watching several install videos I decided to purchase the "Shift Sensor", it only makes sense to have the power removed from the motor briefly when shifting to save your drive train! I found that pedal assist mode 2 or 3 works well. I can't believe how good it is to have the kick assist when going up a hill. You can't even hear the motor. There is a I'm glad I bought a Mid Drive Kit because front hub motor don't take advantage of your gear. My case was 1 - 7. The stock kick stand wouldn't hold the bike up due to the heavy 48v battery pack in the rear rack. There is a product called "B00LNLXML4?" which can be found on the website.

👤It was easy to install. The instructions and templates on the Bafang website were quite helpful, as were the numerous videos on converting a bike to an ebike using the Bafang kit. I use it daily to get to and from work and have used it for river trips. I have the 44T chainring and nine gears on the back and it has handled the steep hills well. I would have spent thousands of dollars on a new ebike, but I'm saving a lot of money now. I am quite happy so far.

👤Accolmile customer service helped me with a few issues. The product was easy to install.

👤It was easy to install. I had to buy extensions for some cables. It was installed on a trike.

👤The display was 750c. It worked well for a while. The controller was fried by interaction with wet weather. I replaced the controller at a cost of $120 and now have a code for communication error. It could be the display, the harness, or nothing at all. I don't want to spend money on this thing when the next money won't fix the problem. The idea of failing to use waterproof connections in your motor is unacceptable. There are other kits from other manufacturers. It looks like a lot of others are having this code, sometimes after only a few months of use, with no apparent reason for it. There is a It was fun, but it was only a few months.

3. Electric Conversion Controller Sprocket Motorbike

Electric Conversion Controller Sprocket Motorbike

GLOBAL WAREHOUSE & RESPONSIBLE CUSTOMER SERVICE You can expect to receive your packges in about two weeks. If there is a problem with the inventory, they will send you an email, please keep an eye on your Amazon inbox. All products have a one-year warranty. They have professional technicians in the US who can help you fix the problems. The electric gear motor is easy to use and control, it provides steady speed and sensitive braking. The main application is suitable for electric bicycle, the power is 250W and the speed is 2950rpm. The electric DC motor has good heat dissipation performance and is high quality. With long life, high speed operation, high temperature resistance, and high power. This electric motor kit comes with a 38 section chain, a speed controller and 13 tooth gear, it can be used in practicality, and it supports working with low noise, low current and no sparks. The dc geared motork kit can be used for motorized bicycle, moped, mini bikes, pocket bikes and electric dirt bikes. They are very confident in the quality of the electric bike motor kit and can give a warranty or a refund. If you have any questions about your purchase, please contact them.

Brand: Sorandy

4. Schuck 48V1000W Electric Bicycle Conversion

Schuck 48V1000W Electric Bicycle Conversion

The iron sleeve cylinder has advantages. If the goods are lost or damaged, please do not return them. They will give you a good after-sales treatment. This kit is a front wheel conversion kit. You can install a disc brake disk according to your needs, but not a flywheel. It's much cheaper to buy a high-quality conversion kit than to buy a complete electric bike. The timelines guarantee. You can get the same high-quality products in a shorter time if you shop at their shop. The electric bike conversion kits do not include batteries. The battery needs to be bought separately. The motor kit can only use batteries with the same voltage as the motor, and the only way to do that is to use a Li-ion battery.

Brand: Schuck

👤Excellent product. I had a lot of fun with this bike. I needed to get some things done in the rough weather, and this thing did the job. I could climb the hills with no problem. The motor could have done the climb on its own. I set the speed limit at 30 mph, but I'm sure I could have gone faster. I think my only complaint is that I would have gone with a thumb twist acceleration grip. If I'm not careful, I'll cause an accident. I thoroughly enjoyed the product. There is an update. I have not had a bike with the conversion kit in about 4 months. I have had a great time with it. The conversion kit is so modular that I was able to easily replace the damages that I experienced. The seller's product support team was able to correct the glitch that did not show my speed. There is a The kit on its own is a great value, but the fact that there is a dedicated technical support team to help fix it adds value to the product.

👤A great help to get around on a bike.

5. Electric Conversion Bicycle Controller Display

Electric Conversion Bicycle Controller Display

If you see that the product is faulty, please do not return it. Please contact my store customer service as soon as possible, they will send you the missing accessories. The front hub kit is 36v. The electric bicycle kit has a brushedless geared bike motor and front wheel. Also, note: The battery is not included. ) The Motor ebike conversion kit with headlights and button switches makes it easier for you to ride in the night. The controller box is waterproof and has front bicycle wheels. The pedal assistance system 8 is more sensitive and allows you to ride without the need for a motor. The e bike conversion kit has a G51 display and offers a number of functions. Don't replace your Twist Throttle grip with the use of thumb throttle accelerator. The power supply will be disconnected immediately if the controller senses the brake signal. The Electric Bicycle Wheel Kit is easy to assemble. The electric bike conversion kit has everything you need to convert an electric bike. The Mountain Electric Bicycle front Wheel has a 100mm dropout and includes a Motor Controller, controller box, pedal assist crank sensor, and one pair of brake handles. The battery is not included.

Brand: Kunray

👤I put the hub on the rim that matches the rear rim of my bike. The rim on my bike is larger than the one that comes with it. I installed the hub, controller and battery myself after ordering new spokes. I used a 36V battery. I didn't install everything in the package because I didn't want the bike to look like an electric bike. I only installed the screen and throttle. I have less wires on my bike. The motor makes a weird sound when I start, but it goes away when I get moving, I'm not sure what the sound is, being that I just finished and only rode it once. It was very easy to build a new wheel with the electric hub. I feel bad for people. People have a hard time doing things. If you can't install a screen protectors on your phone, you won't be able to convert your bike into an E-bike.

👤The conversion kit was delivered 2 days earlier than I expected. That part was good. I have no complaints about the components so far. Don't expect much help with the instructions. I tried the setup before mounting the components. I connected the wiring to the bike after mounting the display, brake levers, throttle and other items. It won't work now. The display is showing an error that means motor failure. The setup was redid with the "learn" wires connected. It seemed to work again at that point. After getting out of setup, I tried again, but nothing. Kunray says there is a video about the installation on Youtube. I can't find a video like that. It doesn't work so far. I'm going to contact the vendor to get more information on the instructions. There is more to come. On the day I wrote the review, I sent 3 emails to the vendor, but they have not responded. I made more attempts to get the system to work. The motor will work at the 5 levels of pedal assist if I leave the learning wires connected. The motor stops working when the brakes are applied, the pedal sensor is not functioning, and the throttle is not working. The controller is bad. There is a The motor is very weak. The maximum speed achieved at the level 5 pedal assist is 10.4 mph, with no load, if you lift the rear wheel with the bike stationary and turn on the motor. I will not purchase from this vendor again.

👤The instructions are not usable. I got my kit working after some trial and error. I would recommend this build. My build is on a TREK mtb. The 48v 13ah battery has no issues. The range is 30 miles per charge and the average speed is 20mph. Nice! Good idea to have some experience in this field. I wouldn't recommend this for a first time build.

👤I've taken it out on the road about 6 times so far and I'm happy with it. It wasn't given instructions and had to watch a video that was vague in some areas, but eventually got it figured out and worked on my bike. 2. The digital controller went blank when I took it for my longest ride because the battery had 30% left. I disconnected the battery and the controller blanked for about 1/2 mile. I don't know why. Good news 1. I was able to go up to 28 miles an hour. 2. It was quite a few. It does not restrain peddling without it. I'm happy with it so far, except for #2 which I have to figure out why it shut down.

6. Schuck Electric Conversion Brushless Gearless

Schuck Electric Conversion Brushless Gearless

The motor is covered by a 12-month warranty. The warranty period is 3 months for all other components. Technical support and hassle-free returns are provided by them. If there is an after-sale, you can contact the factory directly. They work hard to make sure you are satisfied with their services. If you encounter problems during the installation process or after riding for a period of time, their factory has professional engineers who can help you. This kit is a front wheel conversion kit. You can install a disc brake disk according to your needs, but not a flywheel. It's much cheaper to buy a high-quality conversion kit than to buy a complete electric bicycle. Their store has joined the American FBA plan, which will greatly reduce your waiting time and ensure the quality of the goods. The KT control system is popular among bicycle modification enthusiasts and has passed the market test. You can use it with confidence. The conversion kit does not include batteries. If you own a battery with a Li-ion type, you need to pay attention to the motor's and battery's voltages. The kit is only for use with lithium batteries. The bicycle electric conversion kit has a front fork opening of 100mm and a motor that is gearless.

Brand: Schuck

👤Absolutely love my bike motor. My friend helped me put it on. It took about a half day. The cable tying the wires to the bike was the most time consuming thing. It can go 45 mph at full speed. It is nice to know if I am ever in a jam, but I don't recommend 45 on a three wheeler.

👤The product is cheaper than the US sellers. The support after sales has been great. Additional information was sent to help me along the way. Additional components were sent. Would buy again from this seller.

👤It took a long time for the boat to arrive. No one is to blame. If I wanted to pay for it, I could have sent air freight. The kit was $323 and included shipping. Kit was in one box. It was well packed with foam. No damage was done. The wheel has a motor. The Schwinn Meridian was better quality than the ones we have today. When I asked a question, the seller was responsive. If you want to get into an e-bike, or e-trike, with quality parts, and you don't want to mortgage your homestead for your first attempt, I highly recommend this Schuck e-bike kit. My wheel ran backwards when hooked up. I read the guy's comment about the Hall pins and Phase wires. It was easy to turn the wheel. Works well! It would probably not work with disc brakes.

7. LECHEN Electric Brushless Gearless Conversion

LECHEN Electric Brushless Gearless Conversion

The headlight base is high quality and suits all kinds of bike. IPX6 waterproof, resist against splashing water in rain. If dropped carelessly, shock-resistant does not matter. Reliable protection, practical design, and durable quality. Not only does it keep you safe from unexpected pot-holes, debris, and any other hidden obstacles, but the additional loud bike horn also notice to everyone add as a secondary on the streets of your cycling. The default parts of the one electric fat tire bike conversion kit are motor with wheel, controller, display, brake lever, Thumb Throttle, and gift. The battery and tire are not included. The whole kit uses the KT system, so if you don't use it, other parts won't match the kit. The price for one electric bike conversion kit will be cheaper than the whole electric bike. Installation will be easy if they provide the installation introduction. You just transfer the original tire from the bike to the prepare motor and link all components. The installation will be done. The installation introduction was attached to the kit. Important parts include: rated power: 1500W, rated speed: about 50 km/h, fork size:135-142, and brake type: They will provide you with 100% qualified products and quality services. If you have a question about your kit, please contact me. Please contact me first if you can't get the refund because some parts broke. The 1.75-2.125 tire was matched by the 1500w brushless non- gear motor.

Brand: Lechen

8. Voilamart Conversion Electric Intelligent Controller

Voilamart Conversion Electric Intelligent Controller

The item has a panel with a display that supports a number of functions, such as a riding speed display, battery status, power assist adjustment and more. The motor has a power of 500W. The speed is 16-22mph (25-35km/h). Enjoy cycling while driving an electric bike with a max load capacity of up to 150KG. Motor works under Hall effect and non-Hall effect, extend life for electric bike, and Brake levers cut off the power supply to the motor safely. Includes the components you need for a full conversion, including Rear Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties, and Plastic Coil. The battery is not included. A 36 Volt battery with a nominal capacity not less than 10Ah is required.

Brand: Voilamart

👤The motor exceeded my expectations. There are some things that I don't know about this recommendation. The motor is quiet and smooth and can get you over the hills without the help of the rider. I built a crank forward bike that I mounted this kit on and am using a 36v battery. S.l.a. batteries. Even without the motor running, the bike doesn't peddle too bad. The twist grip throttle is what I have hooked up. It will do 15 miles with minimal help from me and will hit 25 m.p.h. On the ground. I had no idea that I would get so far on the charge. There are serious cautions to be taken on this project. The rear triangle spread of 140mm was required before I could get the wheel in place because the motor's axle is very wide. I used a small scissors jack to spread the triangle. I have done that many times. It works well on STEEL frames if you try a little and measure progress before adding more force. Before mounting a tire and a tube with longer valve stem, the rim should be covered with a good cloth rim tape. I wouldn't try to use the tire that was included. I put a lock on the spoke nipples after I noticed that they were well tensioned. I swapped the 7 speed cluster for a 5 speed as the 7th sprocket was too close to my right dropout and using a 5 speed cluster allowed a better chain line. The hole in the freewheel tool needs to be at least 15mm dia. A machine shop can drill over the fat axle. It is not hard. The rest of the installation is pretty straightforward once you get the wheel and cluster. The installation book is useless because I didn't connect the blue speed limiter wires together, but everything works once connected. I ran the 36v line to an in-line 20 Amp automobile fuse and then through a standard 110v light switch before the red wire connected to the controller. I gave this 5 stars for value and exceeding my expectation of performance, but caution because some effort is required to make it fit.

👤I was asked to rate "sheerness" and "thickness". Is that the 4 dtars I gave? There is a This is my trike before. This machine was already 65 lbs. It has gained a rear fender assembly that is all steel and can support a passenger easily, fold out baskets, headlights/mirrors/turn signals, and the motor assembly. It is now at a flat 100 lbs. There is a This is the first electric motor I have used. I thought after the first ride that I needed a stronger motor. I wasted money. I told the seller about my symptoms. He decided I had a bad motor controller after making me jump through some hoops. First symptoms Yes. I felt a push. It made me go a bit better. It would stop working after a few minutes. My battery consumption was much higher than I expected. I thought it was stressed out by the huge weight of this machine and my 200lb carcass as opposed to a standard lightweight bicycle. There is a The seller said no. I believe you have a bad motor controller. He had another person shipped out. There is a He was right. There is a I need a second set of batteries, but this unit will pull me away from a stop on level ground, and build speed to hit a cruise speed of about 15-17mph with absolutely no pedalling. There is occasional cargo on top of that. No hills are beyond my reach. If I need to, I can easily maintain 25 mph on level ground. There is a So... There is a Thanks to the seller. There is a Everyone has a lemon. There is a If you make it right, that matters. There is a He did.

9. Brushless Controller Throttle Motorcycle Conversion

Brushless Controller Throttle Motorcycle Conversion

The BH-Motor magneto stator is for 50cc. The Kunray MY1020 Brushless Motor has an Electric Brushless DC Motor, a Full Copper coil, and a high quality more long life. The motor has a rated power of 3000W and a current of 45A. The BLDC controller has 48V, Proctect Vol 42V, Power 3000W, 24 Mosfet, Current 50A, Phase Degree: 120. The handlebar has a twist Throttle. The Universal Accelerator Handlebar has a Throttle Twist Grips. The reverse functions and wire length are included. The material is high quality. The suit includes: Electric Scooter, Mini Electric Motorcycle, Razor Push Scooter, Ebike Bicycle, Go Karts, E-bike, E Tricycle,Mid Drive Motor Kit, Complete Set,DIY Engine System, and more. What you get is a motor, controler, and a manual.

Brand: Kunray

👤If the builder knows what they are doing, this motor is very powerful. There is a The builders who have used this motor say they are disappointed. They weren't fully aware of what it could do because of the incorrect install. This motor can produce enough performance for a 300lb rider to reach 55mph on a Razor MX500, if set up properly. It is powerful enough to do a wheelie and throw a 300lb rider off the back with no issues. Yes... FLING... A 170lb rider on a Razor RSF 650 is going to get to 66 mph on a flat road in subpar conditions. A quad to 37mph, a Pocketmod to 49mph, and an SX500 to 58mph are not stable. There is a There were 8ah batteries. The original #25 chain and rear sprocket were used for these speeds. There are some things that are CONS: The package that this seller sells seems to be the cheapest one. The motor stand on the bottom is what "foot" means. It doesn't mean foot pedal. It doesn't translate. Most things don't translate. It's easy to understand or at least figure it out. The wires in the harness can be mixed up. If your motor is not running in a straight line, you should move the hall sensor wires around. The colors are green, yellow, and blue. The 3 speed switch wires are often messed up, so you have to switch them around to find the correct one. You don't have to use all the wires. They are not very good. Cut them off and get some other things that would be better. There is a The seller gets 4 stars because they are very good with customer service. There is a It is worth it. You will have to ignore the people who say it's bad because it's in Chinese.

👤Plug and play. I've been pushing the motor hard on this 2x2 vintage Rokon trail breaker. The batteries are wired in series with a standing voltage of 82.3

👤My Razor RSF650 can go up to 45 mph on a flat surface and 40 on a slight uphill. It's a trip that keeps up with traffic. The kit has sprockets. It is ok. You could get better performance with a larger rear sprocket. I would say this kit gave me what I wanted. Installation was relatively easy and I was surprised at how compatible it is. You need to have an idea of what you're doing. I read all the reviews before I bought this and I'm pretty sure that everything negative said was either something not installed correctly, not connected, or issues with the battery not this kit. The 54 tooth rear sprocket has been swapped for a 62 tooth one and the top speed is now 35mph.

👤The product is not damaged. I got it to convert my bike. The mechanics and electronics are all working for me. I don't know what the hard boot wires are for because I tried to start it but nothing happened so I disconnected it. The motor controller doesn't do electronic breaking, so I needed to mount the motor so the sprocket was on the left side of the bike. When the motor controller is first disconnected, I'm going to have some relays in series to connect the three phase rectifier back to the battery. I haven't tested it yet. The direction of the motor's spin is important because the controller does not allow full speed in the reverse mode. You need to do the same thing to the leads of the holifex. The holifex has a lot of cords. There are two red and two black ones for power and the other three correspond with the main motor inputs. I changed the color of the motor. I tried it on the holifex and it didn't work because they didn't correlate the color of the wire in the holifex with the color of the motor, so you might have to cut a strip and try all combinations. You have to wire it to go in the other direction. The wires from the controller should be cut. The Chinese on the handle is a complaint. It's easy to remember once you try them all. If you want other people to know, you can take a Sharpe marker and Mark 123 and FR on the switches. 1 min to do all of that! When I get a battery with enough power, I'll add some statistics, but a 5p 12s battery got me to 15mph on a road with a low setting. Med and high seem to try and stop. I think my bms are controlling the controller. I'm going to test it, but someone said it could get you up to 60mph. There is a It can be hard to figure out the wires coming from the motor controller. I'm going to make a completely new battery that will be 20p by 20s, and I'm going to make it in four separate packs, each with 20 rows of nickel, to give me the maximum amount of nickel to spread out. I'm going to use 20s bms. If you want to make your own regenerative braking on top of the rectifier, you'll need a 1500w boost conversion with constant voltage control. The solar panel can be plugged into the boost conversion to charge the battery. If you want to charge the battery with a wall outlet, you can get 1100w for 30 bucks, but you need to research ahead of time how to turn it on. You might want to look into a step down from 72v to 12v to power low voltage equipment. I would suggest getting the step down to 12v and then a 12v to whatever you need because a lot of DC stuff uses 12v. A battery power output monitor is a good idea to keep track of Watts and battery voltage. If you're going to use this motor, it's probably the cheapest one for the wattage, but the in wheel motor is a lot more compact and takes up less space in the frame of the bike that could be used for battery. I just learned how to make an in wheel motor and I think I would probably make my own motor and motor controller, even though I don't know a good source of cheap coated copper wire. This is probably the best option for the average Joe, but they should buy a chain tensioner. It will save a lot of trouble if you just do it.

10. Voilamart Electric 3000W 5000W Conversion Kit Black

Voilamart Electric 3000W 5000W Conversion Kit Black

If the motor can work normally, follow the steps in the installation manual to connect it. They will provide technical support if you have any questions. They work hard to make sure you are satisfied with their services. This frame is made of steel. The mountain bike is called the electirc. It's suitable for most wheel sizes. The cover is made of iron steel and uses high quality anti-scratch plastic. The kit has a net weight of 23KG. The frame body, controller box, rear flat fork, battery, head tube,Cover,Bolts and washers are included. Anti-rust treatment inside and outside the steel pipe is the first choice for assembling the electric bicycle kit. The spacing is suitable for the rear shock. The top mounting of the shock absorber has several positions, which allow for the use of shock absorbers of different lengths and strokes, as well as changing the geometry depending on the riding style.

Brand: Voilamart

👤I was able to fit a 27.5 inch wheel in the kit, and it fit the 28.5 inch rim that I mounted for research. There is a The only complaint would be not being able to fit the speed controller in the bottom holder, but it's not a big deal...most 3000 watt and up speed controllers won't fit, you can fit it on the inside of frame, and it came with no instructions. There is a It was not too heavy. I was able to carry the box over my head. There is a The kit came with all the bolts and the key. You can do any custom design that you want to make it look unique. I will update my pictures once I get it assembled.

11. Ricetoo Electric Bicycle Conversion Display

Ricetoo Electric Bicycle Conversion Display

Global Warehousing and customer service. You can expect to receive your packges in 7 days. If there is a problem with the inventory, they will send you an email, please keep an eye on your Amazon inbox. All products have a one-year warranty. They have professional technicians in the US who can help you fix the problems. How to contact them on Amazon. 1. You can receive goods faster if you use Amazon's services. If you have a problem during use, please contact their store customer service first, they have experience and can provide you a solution. 2. They use the Kunteng Control System, please don't replace any of the accessories without consulting their store customer service. The Hall controller can start quickly and smoothly from the beginning. 3. Their products do not contain internal and external batteries. This product is only for snow bikes with tire sizes of 20 * 4.0. 4. The EBIKE conversion kit has a motor. The maximum speed is 45-50 km/h. If you want your rear fork to be installed, you need to make sure it is 170mm. The display provides battery percentage, speed, total and single stroke distance, power, PAS level, and potential error codes. The display package has the manual. The riding experience was pleasant. 6. You can convert ordinary bicycles to snow bikes with this product. Buying new electric bicycles is more expensive. A single person can complete the modification in 1-2 hours. If you don't install the kit, please find a bicycle store to help or a friend who will. To avoid Kit, make sure the parts are intact. If you see that the product is faulty, please do not return it. Please contact my store customer service as soon as possible, they will send you the missing accessories. If you receive the goods with loose spokes, please contact customer service.

Brand: Tbrand

👤The seller was able to fix the minor issue in a timely manner. I am very impressed with this product, it does exactly what it says.

👤It's a scam, the controller is only 48V.

👤I build custom bicycles.

👤The world wide transport problems arrived very quickly. The value kit and instructions are easy to follow. The whole set up works well.

👤The product was of great quality. I will do business with them again. The store proved to me that satisfaction is their top priority. I would recommend them to anyone. Absolutely professional.

👤Don't buy it feels like a 350 watt motor, go with Bafang 750 HD.

👤Poor workman ship. Twice they had to return. The controller's interface and spokes come off the wire.

👤I used this on a custom frame. I only used the motor because I have a 52v battery, a Grin baserunner, and other things. Installation was easy, it handles the 60 phase Amp without issue. The speed is just over 30mph. I needed a freewheel extension to get the right gear.


What is the best product for bicycle electric kit?

Bicycle electric kit products from L-faster. In this article about bicycle electric kit you can see why people choose the product. Bafang and Sorandy are also good brands to look for when you are finding bicycle electric kit.

What are the best brands for bicycle electric kit?

L-faster, Bafang and Sorandy are some of the best brands that chosen by people for bicycle electric kit. Find the detail in this article. Schuck, Kunray and Lechen are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to