DIMENSIONS The size L is 13 x W 9 x H 8. Will fit school supplies, personal beat boxes, and all mobile devices. A vintage-style beer holder is a must for any bike. The Cruzy is attached to your bike's handlebars and allows for easy access to your beverage as you cruise down the street. Coffee cups, cans, bottles, and flasks are taken. The high quality full grain leather acts as an insulation layer that keeps your beverage cold or warm. The leather is 100% soft. The Cruzy is made from double stitched and fire branded leather and rustic brass metal, and it is lightweight and long lasting. The grain of the leather will oxidize over time with age and usage, with a slight change in the color with age. Keep it clean with a damp cloth and apply a beeswax leather conditioner. The leather color and texture may be different. The Cruzy is a great gift to give to friends. The sleek, chic and minimalist look is perfect for a fixie bike or vintage bike. It is a sure fire winner.
👤This cup holder is very nice. It snugs around drinks with a little give and feels soft. I want my bike to look great and this color looks great. I had the same issue as another previous purchaser, but knew that letting it fall limply forward was not going to work, so I bought 2 anyway to see if I could come up with a better way. If you just relocate the cup holder from the front, it will still install well. I'm going to give the other to my best friend as well. She will love it! I left photos for anyone who would like to see how I installed it and how I can help them in the future. I highly recommend this product.
👤I am so impressed with this product. The amount of love that goes into the packaging and branding is astounding. The cloth bag that this cup holder comes in is adorable and something I will keep and use. The leather cup holder is not as dark as the picture would suggest, but it is still beautiful and supple. It feels like a $50 product even though it was only $20. There is a I didn't mind the extra work since I will only have to put it on once. I put the thing in the basket because I have a basket in the front. My basket and bike look great, but this holder took it to a whole new level.
👤The leather straps are pulling away from the rivet after only 3 uses. A poorly placed rivet is to blame. I contacted Hide and Drink to see if they could send a new one or not. I was told that since it was past 30 days, I should go to a local leather repair store. I was less than happy.
👤Tasty beverages look good on the handle bars. The leather bands take some figuring out the best placement on your bike handles, but it's sturdy. I've gotten a lot of praise. When the frozen drinks thaw, they stick to the cloth interior. If you ride wearing a white shirt with an open container of frozen sweet tea, take it from personal experience, because you don't want to hit a big bump.
👤The leather cup holder for my bike is amazing. I used the photos from another user to help me figure out how to install it. I took it out for a spin over the weekend and it stayed in place the entire time. The leather is high quality and care packaged well. I would definitely recommend it.
👤I was very excited to have a cupholder for my bike. It only holds single use cups, not what I wanted. Maybe I missed that. It will not hold a clean canteen water bottle. I was able to get an aluminum glass in there, but who rides with an open top glass? Totally disappointed. I didn't attach my bike very well. Great craftsmanship, but not usable. I just gave it away to a friend.
TILE andFUNCTIONAL: The cup holder for bike can be used to hold a variety of small items. You can put a big phone in the pocket on the side. There are many loops and mounting positions that can be used to hang decorations. It has a shoulder loop that can be taken to trip. The bicycle cup holder isElaborate product. Protect your bottles from falling off as you ride with the bike bottle holder, which can be easily installed with just three straps, keeping the water bottle safe and stable even on rough roads. Easy installation. The MIZATTO cup holder can hold up to 2'' bar. Installation video on the listing is all you need. The design for cups and water bottles has a drawstring. Perfectly hold your 12-32 ounce cans of beer, large cups, coffee mug, soft drinks, and a bottle. A multi-functional design is not just a cup holder. It's also great to hold bottle, cell phone, wall charging and more. Keep your drinks cold in hot weather and warm in cold weather with their water bottle holder. This cup holder is made of premium Oxford cloth and 20CC PEVA, it is durable and can be used as your faithful bicycle companion.
👤I love this bottle holder. They can fit a variety of different bottles. There are cans and ounces. The holder is slightly insulated to keep your drink cold. The mesh pockets were easy to install and hold small items. Before you buy, I would suggest you look at how you would mount it. If you don't have a solid cross bar on your handle bars, your drink will "lean". You can keep your bottle in it and use it as a coozie if you detach it from your bike. It's not great for road bikes as it's a little bulky, but it's perfect for cruising around the neighborhood.
👤I got tired of carrying their water bottle for them so I bought these for my daughters to use on their scooters. They fit our water bottles easily.
👤It is a nice place to keep a water bottle. It is easy to pull something out of it. I can put my keys in there as well. It works well for the child. I wish they had a better explanation for the triangle installation. I figured it out by myself. Do not need a scientist to do it. I think that's correct.
👤I like this cup holder. It keeps my drinks from spilling. I can put things in my cup. It is lightweight and insulated. I was disappointed that they didn't show a cell phone holder. You have to have a small phone for it to work. I would give it 5 stars if they sewed the part down the middle.
👤I wanted to attach it to my electric scooter. The inner lining is not heat sealed as some lunch bags are and it is not good. If there is a spill in your container, it will leak out of this holder as well. I didn't think it was that big of a deal. I had to ride home with liquid dripping all down the front of me, the scooter, and everything else because the holder acted like a slow sprinkler head that absorbed some of the liquid and then steadily leaked the whole way home. I am trying to dry it off as much as possible after tipping it out. The liquid got trapped between the two walls because the seams puncture through both layers and provide entry and exit for liquid, so it didn't really work. When I got home, I had to spray the scooter down.
👤I bought two e- bikes and thought they would be a nice addition. The quality is good and I like the way they fit into the crevices of the stem and handlebars, but unfortunately for me they can only attach to the left side of my bikes, which is odd since both of my bikes have the electric control box on the left. They are perfect for holding sports bottles.
👤It's easy to get the bottle in and out because it's right there by your hand. I was drinking more. The side pockets are pretty tight, so I'm pretty happy with that. They're good for keeping things in there that you don't need immediately. I had to use two hands to remove them. If you're more co-ordinated than I am. You can't fit a lot in the side pockets. I wish they were bigger but not large enough to take off a star. I didn't know what I was doing so it was difficult to put on. Instructions might have been helpful. I figured it out. I am very happy with the bottle holders. It is easy to use and convenient. I like them a lot.
This is the best bike caddy. Enough is enough! Does not include cell phone, keys, or bottle of water. It's easy to use. The drink cup holder is easy to attach, you can put it on the handlebars for easy access to water, and it has pockets to hold keys and phone when out biking. No screws are required and you can mount the holder in a variety of ways. WATERPROOF FABRIC Even if the glass on the bike cup holder leaks, you can take it out even if it rains. A multi function cup holder. If you're looking for an easy way to hold a water bottle while sitting or biking, this is the bottle holder for you. Well made and flexible enough. The bike cup holder has a lot of flexibility and can be attached securely to any bike, it's very stable and sturdy once attached, the pockets are helpful for carrying items. If you have any questions, please feel free to contact them, they will provide you with satisfactory solutions within 24 hours. If you have any questions, please feel free to contact them, they will provide you with satisfactory solutions within 24 hours.
👤It was what I wanted. It holds my things. I love it!
👤I like the fact that it can hold my things in the same container.
Quality guarantee They're so confident in the quality of their products that if you have any product issues, they're very happy to give you a Refund or a Replacement. You just have to order it now. A solid collet. The Cup holder uses high quality black Alumimum clamps with a bolt to increase max weight and extend service life. Cup holders with plastic mounts can be easily broken. The cup holder is made of eco-friendlyABS material, which is more durable and safer than other materials. The drink holder can be used on ATV, motorcycle, bike, boat,wheelchair, scooter, and desk. It's suitable for different cups. It works for most cups and bottles. It's easy to install,drill-free. It's easy to install,drill-free.
👤It would fit cans or plastic water bottles, but not a reuse bottle. If they made a bigger size, they would buy another.
👤It's very easy to put on your handlebars. Comes with a wrench. Doesn't fall. The colors are vibrant. Think plastic. It works with most cans/bottles. I love them!
👤There is a flaw in the way the pineapple holder is held. It doesn't work for most bikes. If your bike is not a cruiser, forget about being able to fit this down. Your handlebars have to be very thin for this to work because the hole of the clamp is less than one inch. They could have made a bigger one, but it wouldn't work.
👤It's easy to install and it's super cool. My wife is the hit of the ride if this is put on her car. Works well.
👤This product has a metal mount and is very high-quality.
👤This is very easy to access. I have to return because it won't hold anything larger than a 16oz water bottle. It is not effective for a drink holder. The design is exactly what I wanted.
👤It was perfect for my wife's bike. It works and is well made.
👤The bike cup holder is great. It's large enough to hold a cell phone. The girlfriend likes it.
Installation and Disassembly can be completed in 2 minutes. Installation instructions are required for the product to work. The bike cup holder has a Gray skin and a pink one. The cell phone holder is on the side of the cup holder. The photo is not included, but the size is shown. The cup holder's key ring tab is also molded. The keys are not included. The bicycle cup holder can be mounted in front of the handlebars or behind them. This is the best bike caddy. Enough is enough! Does not include cell phone, keys, or bottle of water.
👤It's just as good as big name brands.
There are 6 colors to choose from. The cup holder has a printed skin with palm and polypropylene leaves. A side mount with a bolt. The tabs on the inside of the cup keep your drink tight. The bicycle cup holder can be mounted in front of the handlebars or behind them. Coffee cups, plastic cups, keys, phone, wallet and normal 12oz cans and bottles will fit nicely.
We are so confident in the quality of their products that if you have any product issues, they are very happy to either provide aRefund or aReplacement. It is made of lightweight aluminum alloy and has a good finish. It's not easy to make a change with high strength and high hardness. The design makes it easy to put the cup in the bottles while you ride your bike. It's best to apply to 76mm / 3.0inch water bottle. It's satisfactory. Appropriate for all mountain, road, fixed-gear, other bike with or without bottle, perfect for those who want a fashionable water cage to lighten their load. There is a guarantee. You can email them at any time if you're not happy with their product. They will help you solve your problem.
👤I have a Bell version that is smaller in diameter and holds my bottle. This one is larger with less. The bottle is close to falling. It works well for cups with more taper. It's hard to find bottles that are tapered. I think it works well as a cup holder. The red coating looks good. The bars will hold on if you use enough rubber.
👤I was looking for a cheap cup holder that could hold both my yeti and solo cups. It's too big to hold a brumate. The finish is a little off on one of the two that I purchased.
👤The product is aluminum not plastic. Exactly what I wanted.
It can be mounted vertically as well as horizontally if it is drill-free. The bottle cage mount is made of high-quality silicone material, which has strong stretchability, and can meet most bicycle and stroller frames. Application scenarios for strollers and bicycles with bottle cage mounting holes. It can be placed anywhere on your bike. The bottle cage can be put on the bicycle frame in a few minutes. The bottle cage mounting seat is designed to be safe and firm, the belt has good tensile performance, and it is not easy to fall off even if it encounters strong vibration. The bike bottle cage mounting base is made of harmless green materials that allow you to enjoy a green and healthy life. The bottle cage mount is in the package.
👤I attach a standard water bottle cage to my ebike that has no welded-in mounting points and a non-circular seat tube. I wrapped a zip-tie around each band and over the cage because it seemed a little wobbly with water in the bottle. The bands conform to the tube and protect the paint. So far, it's been a good ride with a full water bottle.
👤I put this on my bike. I put the see bottle cage through some rock sections with tight turns. Stayed put without a problem. I used some zip ties to reinforce. Very happy. Doesn't get in the way. I tried the fidlock, but it didn't work.
👤It should come with different bolt sizes. The bottle cage bolts are 10mm in length. 15mm long bolts are needed for what I'm attaching. I had to order some bolts to make the solution more expensive. Check the length bolts you need.
👤The rubber pieces fell off. I tried to loosen the strap. The piece that secures the extra strap broke. The water bottle was secured with electrical tape and stayed secure for a ride today.
👤Happy with the mounts. I thought they would be stronger. They will get the job done, but have yet to test on a road or trail.
👤It's a great idea to secure bottle cages on upright mounts when you want to lean forward and grab your bottle. It helps to keep the cage secure.
👤I used this on my e-bike that didn't have pre-drilled holes. This product works.
👤My son's full suspension bike does not have braze-ons for a water bottle cage.
Their goal is 100% satisfaction. If you have any issues, please reach out to them so they can solve them for you. If your bike has a bottle cage fixing screw, you can fix it to the front tube. If you don't have a bottle cage or a screw for motorcycles, you can connect the converter to fix it on the round tube. The bottle cage is made of nylon plastic and lightweight, so it won't wear the bicycle frame. It's suitable for roads, mountains, electric bicycles, adults, kids, motorcycles. It is compatible with all 2.33inch cups through the adjustment button at the bottom, and is firmly fixed so that it will not fall during riding. Professional accessories are designed to allow you to quickly access your water bottle or cup, keep adequate water when riding, and enjoy a pleasant riding trip. Installation and Disassembly can be completed in 2 minutes. Installation instructions are required for the product to work. Installation and Disassembly can be completed in 2 minutes. Installation instructions are required for the product to work.
👤I've always wanted a bottle holder on my bike, but I couldn't find one that was as wide as the one on my bike, and it took a few minutes to install, but it can fit almost any bottle size with how wide the adjustment range is.
👤I was looking for a water bottle holder that was similar to this one. I was wrong. The description made it appear to be flexible. My search continues.
👤I ordered another one for my other bike because my first one was easy to install. There is a The package was incomplete. The back part is missing.
👤I wasn't sure if it would fit, but it did. Love it.
👤It seems sturdy and holds a variety of containers.
👤For a full review, please watch my video. I think the screws for attaching the device to the handlebars should have been larger. I have arthritis in my fingers so I can't use a tool until I am able to finger-tighten things. You can see what I'm talking about in my video. I'm happy because I use the tumbler daily. You might want to look at something different if you have anything larger than my tumbler. If you found my review helpful, please vote for it. Thank you!
👤The plastic used in the cage is strong and lightweight. Everything you need to attach to a tubular frame is in the kit. No matter what sport you play. Installation was easy and fast. Took me less than 5 minutes. It's suitable for any bottle. It is compatible with all 2.33 inch cups, cans, bottles and slim vestle through the adjustment button located at the bottom. I attached my bottle holder onto my golf push cart because the manufacturer talks about how well it fits on two wheeled vehicles. The holder that came with my cart was inferior to this one. The original fell off and never came back. This one is going nowhere except for golf. The highest of quality and great value.
👤I needed to put my coffee carafe in the office while I was biking to work. I ordered this because it was easy to install. I took it out of the box and put it on my bike. It was very easy to put on and have not had any issues with it.
We are so confident in the quality of their products that if you have any product issues, they are very happy to either provide aRefund or aReplacement. The 22 ounce bottle is easy to squeeze. The push/ pull cap is easy to open and close and allows for a strong flow of water to quench your thirst. The 50 Strong water bottle holder is lightweight and easy to install. It's great for road, mountain, hybrid, touring and electric bicycles and can be used by a professional cyclist or someone riding just for fun. Does not include mounting screws. 2 Pack Super combo. The set comes with two light weight bike water bottles and two sturdy bike cages. Premium plastic bottle holders are designed to last and support you on your biking adventures, races, triathlon or riding on the roads. 50 Strong makes its products in America. They are a family-owned business that is proud of its craftsmanship and customer service. Their state of the art factory in Ohio is where they manufacture high quality products. Their talented employees create innovative products to help you lead a more active lifestyle. They want you to be as happy with their products as they are, and that's why they have a satisfaction guaranteed. They offer a 100% satisfaction guarantee if you are not. They will send you a full refund or a replacement product if you contact them.
👤Did it come with screws or a way to attach it to the bike? How am I supposed to use it?
👤I picked up some water bottles and cages for our bikes. They seem to be very durable. The plastic cages hold the bottles securely and won't bend like aluminum cages. I didn't notice a plastic smell in the bottles after washing them. The bottles can be thrown in the dishwasher.
👤Great bottles. I mounted them on my bikes. They fit perfectly and do not affect my riding. I had two falls after installing them, but the bottled stayed in the rack. Great product and fast delivery.
👤The bottles seem to be okay. I tried to put the cap on. One of the 2 packs was used to thread. They only do cross-thread and leak. I would give a 0 star if I could.
👤You get a lot of value out of this for the money. You can tell it's cheap, but who cares? The bike shops were selling bottle holders. I would buy this product again. I don't think it's a good idea to spend over $20 for something to hold a water bottle.
👤The bottles are garbage. Water leaks from the cap when I take a drink. There is no seal on the cap to stop leaks. They still leak even if I put the cap on flush.
👤It seemed like a great deal at first, 2 bottles and 2 cages for $16. It was easy to install and match the factory mounts on my Cannondale Topstone. I had no issues for a couple of weeks, until I hit a small hole in the road and the bottom tab that holds the bottle snapped off. I did not lose the bottle. The bottle was only half full when this happened, so I am surprised at how brittle the material is. The bottles fit tightly and seem to seal well. When I first got them, there was a strong smell. After washing it several times with soap and hot water, I can still smell it. I think putting them in the dishwasher would help. There is an update. The second one broke a few times, the same thing as the first one, hit abump in the road and snapped. The retainer is between the cage and the bike. The P3Steel 2.5 was printed out. It works like a charm.
👤The bottles leak. All of my water spilled out after I hit a bump in the road and both bottles fell out. Absolutely frustrating.
👤I disliked that I had to accept black bottles but was contacted by a company that said they were out of stock and could send the black ones. It doesn't fit my bike.
It's easy to get your bike water bottle. It's great for road, mountain, hybrid, touring and electric bicycles. The Tourbon bicycle water bottle holder is made of high quality canvas and leather. It is convenient to carry your cup on a daily basis. The bike cup holder has a rotating degree to meet your angle demands. Can hold coffee cup, wine bottle, water bottle, and so on. It is possible to fit most bikes. It can fit a bike frame from 1.18" to 2.36".
👤Have tried it with different bottles. It was perfect on the handlebars. The step-through frame does not allow for a bottle cage.
👤It looks nice, but it feels a bit flimsy. It is too small. The 16oz Kleen Kanteen only fits halfway. Anything bigger than a soda can will not fit. I think it would take 2 hands to remove a bottle from it because of floppiness. Sending back...
👤Will fit most bottles. It doesn't take up a lot of space. The vintage bike is cute.
👤The tall design is great for water bottles. When you reach your destination, snap on/off allows you to easily take your drink with you.
👤It took one month for it to break. I just ride suburban roads for pleasure a few times a week and the entire plastic component broke, rendering it useless and I am unable to repair it. Very disappointed.
👤The ring is too small to fit on the handle bars.
Bicycle drink holder handlebar products from Hide & Drink. In this article about bicycle drink holder handlebar you can see why people choose the product. Mizatto and Sepfavo are also good brands to look for when you are finding bicycle drink holder handlebar.
Hide & Drink, Mizatto and Sepfavo are some of the best brands that chosen by people for bicycle drink holder handlebar. Find the detail in this article. Yoyoapple, Bikecupholder and Bikecupholder are also brands that their products are worth to check.