Best Bicycle Disc Brake Pads Heavy Duty

Pads 14 Aug 2022 10+ Comments Open

1. BlueSunshine Front Back Disk Brake

BlueSunshine Front Back Disk Brake

The package contains a mechanical bike 160mm front and back brake disc kit. The front and back of the mechanical brake kit has a 160mm diameter. The center 6 bolt pattern diameter is 48mm. You can either use the mounting adapter on your threaded hub or use the 6 bolt pattern to mount the rotor directly. The kit works best with the motorized bicycle frames. The Caliper holders are required.

Brand: Bluesunshine

👤These are often recommended by razor mx500 owners. The Bolt pattern matches the rotor. You take the piece of equipment out of the machine. Bolts up. Proper spacing is required for the Caliper. The front cable needs trimming. Better than short. I'm pleased with my application, even though thebfront had a bit more pressure on it. The kit is small for the price. I will be using these rotors soon. Most users failed to make sure the bolt pattern was correct before purchasing. It seems odd, and not sure what else they would fit.

👤These did not work for me. I installed them correctly, and they held any pressure. The lever went all the way to the handlebars. I have a very heavy bike. I go down the hill a lot. If you are doing light riding on a flat surface, these might work for you. Do not buy these if you are doing serious riding. Spend the money on a brand of brakes. They're not cheap but you won't die either. You have to decide what's important, your life of $50. I cannot stress enough that these are not even half decent brakes.

👤Like the other reviewers, I should listen. I just got back from having a mechanic break loose the 2 bolts on the 2 rotors that were Torqued on so tight, and I have all these packages unpacked, tools scattered about. They are the wrong bolt hole pattern. There is a I realize they don't speak English, but they don't speak the same language so they can match bolt hole patterns. If the bolts don't line up, why advertise the mateing parts on the same page? I'm going to spend the rest of the evening repackaging to return, cleaning up my workspace, and waiting for someone to find the right sizes for my disk brakes on my motorized bike. The 10 spoke "star" pattern "motorized bike mag wheel" assembly is not directly bolting onto the disk brakes. Someone should be sued for false advertising. I spent 100's of dollars on Amazon and they probably won't post this. I am extremely unhappy with my first review. I have better things to do than write negative reviews. I'm not sure what path I'll have to take to get A to fit to B to fit to C, but it's not rocket science. It makes me wonder who they have in their R&D dept.

2. Hotop Brake Spacers Bicycle Blocks

Hotop Brake Spacers Bicycle Blocks

COMPATIBILITY The brake pads are suitable for bikes that are over 20 inches. You can buy the same quality bicycle at a cheaper price if you don't have to go to a bicycle shop. Each piece of v brake pad comes with a piece of a nut and a piece of spacers. The V bike brake pads have a slightly curved design which does not hurt the wheel, and provide braking ability. TheBrake Pad size is 70mm/ 2.76 inch in length, 10mm/ 0.39 inch in width and 38mm/ 1.50 inch in height, it's lightweight and portable, it's convenient for riding a long journey. The v brake pad is made of hard-wearing rubber and metal and the water-leaking tanks help stop power of your bike in adverse weather conditions. If you want to read the text on the brake pads, leave the left and right ones.

Brand: Hotop

👤Over the past 4 years, I've put almost 2000 miles on my Giant Escape 2, and 1500 of them in the past 4 months. It felt like being in a gas chamber. The brakes were getting worse, but I just lived with it. The rear brake pads started making a grinding sound one day, and after a quick investigation I discovered that they had worn down to the metal. Oops. There is a I found a nice pack of brake pads and decided to try them out. The pads looked a little longer than the ones on my bike, but I thought that was okay. It was easy to swap out the brake pads, but the difference they made was even better. Wow! I can stop now. Way, way, way better. I have a set of pads on my shelf ready to go for the next change, because I bought the 4-pack. Customer was very happy and would buy again.

👤"You get what you pay for" is the old saying. The brake pads were obvious to be of low quality. The rim contact surfaces were not flat but curved, the finish was poor, and the hardware was low budget. The bolt length was too short to allow the nut to make enough contact, so I had to use thinner spacers. What is the most important feature? How did the brakes work? The bike was not stopped well by the brake pads. They did not perform their job quickly because of the amount of pressure they were under. They felt "disgust". They didn't perform as brakes need to perform, so I could have lived with the poor quality appearance. I was thankful that I was able to get a refund quickly.

👤My kids have a bike. My wife has a 26" bike. The brake pads are not as good as the stopping power and adjustability of the original ones. The allen wrench that comes with the brakes is very cheap and rounded over so you should use a good allen wrench.

👤I had the worst time working on a cheap bike repair when I got a set of these. The threaded stud on the backside of the rubber brake pad was pulling loose during the installation process, allowing the pad to flop around despite the properly Torqued bolt. I finished the job after getting one of the four sets to work. I'm not sure how my experience with this product is different than other reviewers. I think I'm a bit better than a novice bike mechanic with a lot of experience. This is the first time I have ever had something like this happen. The low end quality of the bike being repaired could have contributed to the issue.

👤The brake pads are working. They don't stop, which was important to me. The brakes on my bike were making noise so loudly that it was becoming embarrassing. I'm happy to have solved that issue. There is a I think they're ok. I don't have a lot of information for comparison but I think the pads would perform better if the rubber was a bit more supple. The rubber of the brake pad is hard to touch, and it is hard to feel the sensation of plastic. Maybe this makes them last longer. Or perhaps a function of their lower quality. They work well in any event. If I'm being honest, my braking distance is probably a little worse than with the original brake pads. I'm happy with this purchase as I don't need high performance equipment and these provided a decent solution at the right price point for me.

3. Park PP 1 2 Hydraulic Brake Piston

Park PP 1 2 Hydraulic Brake Piston

A positive grip is achieved with a dual density handle and a durable investment-cast blade. The brakes now fit the XTR.

Brand: Park Tool

👤I find that my flat-head screw driver works better than this tool, and I'm not sure why it exists. I would have returned it if I had tried it out. I don't understand the need for a tool like this and it's great.

👤I didn't think I needed this until I saw my tech open the pads. I bought this one right away. When one of my discs starts to stick, I use it to keep my pads as wide as possible. I understand that it is a must to get the pads separated again, but I haven't squeezed the brake handle with the rotors removed. Disc brakes are great when they're perfect. They're a pain when they get quirky. This will help fix the pain. Don't be cheap. You should keep one in your tool box.

👤I have bought a lot of Park Tools over the years and accepted the price premium they command on the assumption that I was paying for quality. The tool has ended that perception. The edge of the tool is likely to have been dropped at some point. It was easy to file this damage off, but it would never have left the factory floor if a German company had made it. Park Tools is over for me.

👤My local bike shop wanted $35 per axle to replace the pads, and I had a top of the hydraulic brake system. I decided to use a SAFE tool to pry the pads and a kit to replace them for $9,99, which is $50 less than the original price. This tool is on hand for future replacements. Can't go wrong, it's a lot easier than you think.

👤Since I started using this, I haven't had any sticky brake pads. Every time I change my pads, I use this spreader. I used to have to go to the shop for help with my brakes once in every 4-5 pads. I can take care of this myself now. The screwdriver does not work as well.

👤I wish I'd bought it sooner because it works as expected. The last 10 years have shown that it's unnecessary to separate the pistons with two screwdrivers. Having a dedicated tool just means less hassle. I expect to get out of this tool over the course of my service.

👤A lot of people have a tool in their toolkit that they never use, but the Park Tool Brake Piston Press is that tool. This tool is not needed. I think it can be useful but not for me.

4. Top Brake Disc Level Ultimate

Top Brake Disc Level Ultimate

The manufacturer warranty is for 2 years. There is a recommendation for racing, cross country, mountain, downhill, cycling. Fit for all bikes. Extreme stopping power. Good anti-noise ability and easy modulation. The bed is easy to install. It is normal for the brakes to make noise during installation, bedding them properly will make them quieter. The backplate is steel and the pads are made in Taiwan.

Brand: Top Brake

👤I replaced my old pads with ceramic ones because of the noise they created when the particles from the old pads were transferred to the new ones. Here's what you do. Before installing the new pads, you should clean the rotors with alcohol to remove the old particles. I found that using water on the pads made things worse. I had to clean and dry the pads after that happened.

👤They have good stopping power. Recommended!

👤I went to three bike shops that did not have cross reference. These were perfect and arrived in two days.

👤Quality pads. If not better than stock pads, it is compatible with Sram Red AXS calipers. Bed in normally and acetone to clean your rotors.

👤I was surprised at how well these work. The replacement of the SRAM brand is hard to find.

👤The sram force brakes fit perfectly.

👤Professionale buon prezzo qualit.

👤pessime, non compratele, non ne vale la pena... Su force axs.

👤El produsto lleg perfecto y rpido.

5. BlueSunshine Mechanical Brake Front 160mm

BlueSunshine Mechanical Brake Front 160mm

You can order now and pay free. They can provide a 2 years warranty for their product. It was made in Taiwan. The mechanical disc brake is actuated by a cable. There are two sets of calipers and one set of rotors. There are aluminum alloy calipers, 12 bolts, and 2 steel G3 160mm rotors. It is easy to adjust power modulation. For use with brake levers.

Brand: Bluesunshine

👤The pads don't generate as much stopping power as the ones that came stock on my bike. The power is not there, so I put them up about as much as I can. I guess they are called the caliper? I'll replace the pads soon, they seem to suck, as far as I can tell.

👤I took care to clean the oil off of the braking surface after installing and adjusting this. I can pull the lever as tight as I please, but the pads don't produce much force. The V-brakes that they replaced had more stopping power than these. It was replaced with the Tektro HD-M290.

👤I had 1200 miles on my mechanical electric bike brakes before they were worn out. I replaced the front and rear brake assembly myself because it was too difficult to replace the discs and cables. Most Chinese bike manufacturers use the same size and distance bolt patterns for the front and rear brake assembly, making it easy to bolt on. The brakes work perfectly after simple adjustments. It's quite a bargain.

👤There isn't any break pads that you can order limited to one pair. I wish there was a place to order spare pads. There is a I bought a 180mm disc rotor for the back to work with the sprocket for my motorized bike but haven't tested it out on the road. I only used one set for the rear so I can use the pads from the other.

👤rotors bend up quickly because of waste of time and money. Even though I ride this bike once a week, I was constantly adjusting the brakes. I had to buy new parts for my bike at a local shop and wasted more money. I won't be shopping from Amazon's dealers until better quality items are developed.

👤I added these to my trike. They look good, have all the parts included, and install without any issues. There were a few issues from the first use. I couldn't adjust the pads to get more than 50% because of the poor contact on the rotor. After a few shakedown runs, the pads wore down so they won't last long. 3. I applied a heavy brake lever pull on my last run.

👤I didn't get the bad reviews on these breaks. $20 for a full disc break setup that works great, I have been running them for a week. I installed them in 10 minutes and adjusted them without any problems. I would buy them again.

👤The rotors are working. The one caliper works as it should. The other caliper works when I squeeze it, it doesn't stop when I squeeze it. I had to disassemble the caliper to make it work. It did it again. Crap!

6. Motorcycle Combination Seatylock Accessories Cables

Motorcycle Combination Seatylock Accessories Cables

Buy this security cable from them. Let them know if you weren't satisfied with the braided steel cable bike lock. They will make it right. The bullet lock cylinder is an anti-multifunctional key, anti-tinfoil opening, and anti-technical unlocking. The anti-drilling performance is improved by using the alloy blades inside. The lock core and key are mature and stable, it is difficult to copy, and the design is precise. The lock slot and blade have a 0.05mm gap, and the spring and blade use a bilateral balance method. It can't be opened if either side is stressed. It is effective anti-. theft! There are two random keys. Alloy material. The lock body is formed in a single piece, without the use of any splicing, anti-smashing, anti-hydraulic, waterproof, and anti-drilling. The appearance is like the boots of an old cowboy. It's convenient and quick to lock the disc brake when it encounters the hole, because there is no need for a key or press. The scope of use includes bicycles, motorcycles, battery cars, etc. The disc brake disc with the disc brake hole less than 19mm from the edge can be used. The product size is 60mm, width 25mm, height 53mm and top length 35mm. It can be used with a reminder rope of 1.3M. The scope of use includes bicycles, motorcycles, battery cars, etc. The disc brake disc with the disc brake hole less than 19mm from the edge can be used. The product size is 60mm, width 25mm, height 53mm and top length 35mm. It can be used with a reminder rope of 1.3M.

Brand: Bngwenhua

👤Looks nice. The key is easy to find. I like the slip on feature. Make sure it's unlocked, then slide it onto the brake disk. When it finds a whole, it will lock it. I prefer to lock the rear of the disk, so I ordered a longer reminder cable. It works well, but it's snug.

👤This thing seems to be sturdy and has a good weight to it. I don't know how easy the lock is to pick, but I don't think a disk lock is a good deterrent. The spring loaded locking pin helps you find a hole. I think the red plastic spring loaded insert keeps the debris. This is the first disc lock I have ever owned, so I don't have anything to compare it to. It seems to be pretty good. I am happy with my purchase.

👤It seems pretty sturdy. It would be better if the cable was thicker.

👤Good on strength. Would have liked the cable to be locked up. You have to put it in front of the lock and push it along with it.

7. CYCEARTH Bicycle Shimano Semi Metallic Sintered

CYCEARTH Bicycle Shimano Semi Metallic Sintered

The package includes 1 pair of 55mm brake pads, 2 replacement pads, and 2 spare screws. You will get 4 pairs of brake pads and a piece of disc brake adjusting tool. It's compatible with: Saint M800, Deore XT M765 M775 M776, SLX M665, and Hone M604. T605 The material is semi-metallic and has good anti-wear and heat dissipation. Their products have passed strict inspection and are free of harmful substances. The feature is fine appearance, good braking effect, noiseless, safe, stable, comfortable and convenient.

Brand: Cycearth

👤I replaced the ones on the front of my bike that didn't work and the ones on the rear that didn't work, but one set of pads wore down and no good, so I had to replace them. I'm pretty upset that they won't work on my brakes. They started to do the same thing after trying a second pair of pads. The stopping power is better if you go back to the original pads. These are good for mountain biking.

👤I can say that all positivity handles very well.

👤The cable brakes on my E bike work well. They have to warm up. Hope it helps.

👤The hole in the spring was too small for the pin that came with the pads. The hole was a little bigger after I drilled it. The pads are working well now.

👤Installation was quick and easy.

👤Just replacement pads, a great price, and yes, check compatibility with your brake system before buying as pads are specific to the calipers they work on. I have used different models of the pads.

👤The pin that comes with the pads is not good. Rusts are very fast. The pins on your bike are original.

👤They were easy to set up and the price was great. The surface contact on them is better than the usual disc shape pads.

👤It's a bargain compared to the local store price. Will buy again.

👤Bremsen, mal schauen wie lange.

8. Pairs Tektro Shimano Br M575 DP B01S

Pairs Tektro Shimano Br M575 DP B01S

If you want to read the text on the brake pads, leave the left and right ones. The pads are for the initial bite. The short break-in period isdurable. Disk wear is low and the feel is comfortable. Smooth braking offers power. Compared to metal pads, the brakes make less noise.

Brand: Corki

👤I hit the boys with a slap and then hit the trail to hit me. A big wet rock. The brake pads were locked up and I was able to slide even more out of control, into a bush. I found several hundred ripe blackberries. After picking my self out of that mess, I kept riding and the salty tears stinging my lacerations. The brake pads worked well for the rest of the trail and are a good buy for the price and depression. Thanks!

👤The material for the brakes is much thicker than stock pads or any other compatible brand. The pad surface rubs continuously on the rotor even with the pistons on my TRP Spyres dialed all the way out. There is not enough adjustment at the mount. It's odd that the TRP units are a bit thinner. I think the fit would be non-functional if you have the same type of rotors. If you're riding and racing in muddy winter conditions, the Swiss Stop 15 is the best Spyres I've found so far. The Swiss Stop units are expensive and hard to find, but they perform beautifully and last longer than any pads I've tried. Don't use these generic pieces of crap. They seem to have been made in a factory run by people who don't know how bicycle disc brakes work.

👤I ordered the pads because they work well on the downhill stretch of my commute. The pads have a lot of material so right from the start, the pad was dragging on the rotor even though my calipers were pressing all the way back in. I was going to belt sand off but ended up using my old brake rotors to clear the pads. After the pads stopped dragging, I put on my new floating rotors and bedded the brakes in again. The bike is 70 lbs. The pads have to stop a lot of mass for me to be able to play. The ability to change the brake lever was traded. The new pads and rotors meshed well after 2 days of commute and I am happy with my braking power. If the pads had. I would have given them a 5 star rating. The brakes on my e-bike are the HD-E350s.

👤The factory brakes on my Specialized st are not impressive. It was not a good idea to single finger brake. I was going to throw a new set of pads instead of spending 100s on new brakes. Wow! The pads do exactly as advertised, with lots of initial bite and dirt not phase them. I can now brake with one finger. I have put 500 miles on these brake pads and they perform the same as they did when I installed them. I have 100s more rough miles to put on these due to the extra material that others complain about. If you're thinking of buying these pads, just buy them. At 15 bucks, you can't go wrong.

👤I bought these for a Fuji Absolute 1.9 bike that uses a low end mechanical disk brakes. The pads immediately gave a better feel with less noise than the original pads. After removing the old pads, I noticed they still had a good amount of material left, and I probably could have adjusted them before replacing them. The pads had a new cotter pin, spring shim and a longer one that was not needed for my bike. If I have any issues with these, I'll update this review.

9. Pairs Organic Resin Bicycle Mechanical

Pairs Organic Resin Bicycle Mechanical

These brake pads are compatible with other brands. T605 Low noise, low dust, disc-friendly, and high-safety are some of the qualities of the brake pads. Powerful and comfortable braking. A short break-in period,durable and long working life. The performance was exceptional at high temperature and wet. It is compatible with the sram avidBB5 mechanical.

Brand: Corki

👤The main point is that they work but have a few minor issues. There is a I had to sand and file down the pads in order to fit them into the brakes that I have, I think you should get more for the price. Since people can hear me coming, it works on the plus side. You can hear them, but it's not loud. They stop just as well as the original pads. The bike shop sells a lot of things, but less than half the price makes them a good deal.

👤The brakes have made my bike sound better. There is a I only had to file down the pads the smallest amount. They would fit through the slot that the pads go into. I wouldn't have been able to install these if I didn't have the file. I decided to go with the higher metal content as I'm a bit heavy at 190 lbs.

👤I fear that the thicker pads used byBB7 may be too thick and have to be grinded down. I gave the faces a slight lick with 120 grit sandpaper, because I saw they were shiny. With the bike off, cable disconnected, a clean, and the backing screw open, the pads dropped into place. The Brand-X seems to be the same as any of the others. I don't know how long these last on my dirt roads.

👤Read reviews about how bad it could be. The pads didn't fit and I had to sand them down to fit. I got these pads even though I ignored all of that. There is a The pads didn't fit my caliper and had to be sanded to fit. There is a Fact: These pads are the best I have ever encountered. There is a Fact: I have improved my braking power. There is a Fact: I won't buy these again because of the reviews about noise and fitment.

👤The work is better than the brakes. A bike stops. It does require a bit of skill to adjust the brake position and cable. These, but. They work great when you dial it all in.

👤I've been riding the pads for a week now and they're nice, work well, and quiet, which was a plus, and they're well built. I hit them with a mallet because they wouldn't fit into the caliper and they went in fine. Other people say they filed it down, but for me it just needed a nudging. I don't know how long these will last, but I recommend them to anyone who wants good brakes.

👤The Cannondale Synapse is about five years old. My rear break pads were ruined. The replacement pads fit my Promax-Render-r correctly. I have a spare set for the next emergency after ordering the Twin Pack.

👤The pads have stoping power that I liked. I didn't like the fact that I had to modify them by grinding some material off so that they would fit the brake housing. There is a One pad fit without modification and the other three needed work.

10. Pangda Pairs Installation Caliper Blocks

Pangda Pairs Installation Caliper Blocks

Their heat pack is ready for more if you use it more than once. They designed every detail to stand up to repeated use and provide you with consistent muscle pain relief. It was sunny. The Bay Microwavable Neck heating Pad is for hot or cold muscle therapy. The size is 5 x 26. Filled with all natural grain for the best heat retention. Only a spot clean. The weight is 2.5 lbs. The bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions. The road brake pad is 50mm in length and easy to remove and install with the tool. V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel and improve braking ability. The versatile c brake pads are good for most road brake bikes, each pair has left and right part, without front and rear, and each piece has a text mark. The package includes 2 pairs of road brake pads with a tool, and comes with a lightweight tool for easy installation.

Brand: Pangda

👤The rubber pads on the brakes do not have enough grip to stop the bike. The brakes were hard to grip and stop the bike.

👤I've been very pleased with the purchase. The pads seem to last a long time as I've been on many hilly rides and they have very little visible wear. Many of the comments seem to be related to the installation of the pads. They are marked well. I had no issues with installation. Try to picture the wheels turning in a certain direction, and install the pads so the chevrons are facing against the spin direction. If the wheel is spinning to the left, you should know the stripes to the right. Where --- indicates the direction of the wheel spin, it's called > > > ---. There is a I will definitely be purchasing them for my other bikes as their pads need replacements.

👤The products look good and work well in less than 1000 miles. There is a They barely show any wear, but I started to feel metal to metal contact. The metal pins were visible on the surface of the pads. Not sure if it is a mistake in design or manufacturing. It's become a really bad deal for me.

👤After sitting in a barn for 30 years, the Schwinn super le tour originally had the salmon colored brakes, but they were hard as bricks. The reviews for reproduction pads were bad, I didn't know what kind to order for a vintage bike. I ordered these because they are easy to install and stop the bike better than the old timey ones. They are a little bigger and easier to install.

👤I bought these pads to replace the ones on the boy's bike. They installed easily and seemed to be nice. They had little to stop power after testing the brakes. They didn't work very well, no matter how hard you tried. I'm skilled at bike maintenance and repair, and I verified that everything was aligned correctly, and there were no issues with the cables. I degreased the rims in case there was some sort of oil on them. Nothing seemed to improve the operation. There is some sort of grease preventing these pads from stopping. You can feel the push back in the hand brake lever, but you don't stop very well. There is a The other build quality aspects of these pads seem to be good, as I might have gotten a set of pads with a bad amount of rubber in them. They don't work when you ask them to do what you need them to do, and that causes the wheels of the bike to spin.

👤I replaced the brakes on the boy's bike with these. I cleaned the rims as part of the install. I had to dig a real one out of my tool box after I found the low quality tool stripped at the corners. These things were installed with clean rims and had little stopping power, which could be a safety risk. They do a better job with the owner as he weighs less than I do, but it is still a gradual slow down rather than a stop. I told the Dad that I would look for something made with higher grade rubber that was softer and grippier for safety reasons.

11. Alritz Mountain Bicycle V Brake Blocks

Alritz Mountain Bicycle V Brake Blocks

Each piece of v brake pad comes with a piece of a nut and a piece of spacers. It is made of high-quality nitrile rubber, wear-resistant, and does not hurt the rim, so that you can say goodbye to the harsh noise, and every time you brake is so comfortable. If there is a sound after installation, please adjust the installation position. The "LIMIT" word is a reminder to replace the brake pads to prevent accidents. The raised rubber text won't be washed away by rain and soil. The long service life is mentioned. The brake pad can be used 8000-10000 times when the speed is 12.5KM/H. The curved design fits the radian of the tire better. The drain boxes on the brake pads help stop the bike's power in the worst weather conditions and the grooves help drain water and indicate wear. It's comparable with all of the V-shaped systems. It's compatible with most mountain bikes. There are 3 pairs of 70mm pads in the set. It is more convenient to have left and right distinguishing signs.

Brand: Alritz

👤I care about what I put on my bikes. I'm happy with the feel of the pads. Smooth, firm, and quiet. The low quality finish on the conical washers added resistance to slipping, despite the fact that the machining finish is not beautiful. This is not an issue once they're installed. There is a pro-install tip. The trailing end of the pads should be positioned a bit away from the rim using a rubber band or folded business card. The "toe-in" technique helps to smooth and quiet break. If you need to replace your pads, make sure to replace the brake cables as well. Couple of bucks on Amazon. There is a There are three sets of pads, one set more than you need for a bike. Get enough pads for 3 bikes by buying 2 sets.

👤I got these for my cyclocross bike that I was fixing up last winter to use as a secondary bike and to try off-road riding this fall and winter. During the spring and summer I rode on the road for 15-20 miles per ride, and this fall I have been doing gravel riding for an hour or two each week. They wore down a bit over the summer, but held up well. The performance was okay initially, but it decreased as they wore. They did not last long after I stopped riding off the road. The spare set included in the package only lasted a couple of weeks after the back set wore out. They had a decent amount of material left on them, but both the front and rear set wore down in a matter of minutes. I'm not sure if they were meant for this type of use, but I am surprised how quickly they wore out. Without the cross race, they wouldn't have been usable. There is a If you want to ride light road, rail trails, or similar types of riding, I think these will work just fine, but they'll probably wear out faster than name brands, and the braking isn't as good as higher quality pads. I can't recommend them if you want to ride more competitively, or if you need to rely on the brakes a lot. I don't fault them for not holding up in how I used them, but at most can only give them 3 stars as a cheap set of brakes with "just okay" performance at their best.

👤I bought this for my son's mountain bike because I thought it would be a nice upgrade from the cheap ones. I was not happy with the performance of the brake pads. I got pink pads because I ordered red. My son pointed out that it looks nothing like the pictures. The pads quality looked okay at first, but man took 30 minutes to install and adjust all of them. We went for a bike ride and came back. There was pink dust on the bike rim. That was only 2 miles and wore out? I should have listened to the reviews about how to wear out quickly. I went to a local bike shop and bought Clark's brake pads for his bike, which was a day difference. Buy better quality if you spend that extra money.


What is the best product for bicycle disc brake pads heavy duty?

Bicycle disc brake pads heavy duty products from Bluesunshine. In this article about bicycle disc brake pads heavy duty you can see why people choose the product. Hotop and Park Tool are also good brands to look for when you are finding bicycle disc brake pads heavy duty.

What are the best brands for bicycle disc brake pads heavy duty?

Bluesunshine, Hotop and Park Tool are some of the best brands that chosen by people for bicycle disc brake pads heavy duty. Find the detail in this article. Top Brake, Bluesunshine and Bngwenhua are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to