Best Bicycle Cell Phone Holder Handlebar Blue Aluminum

Holder 26 Jun 2022 10+ Comments Open

1. ILM Motorcycle Aluminum Bicycle Accessories

ILM Motorcycle Aluminum Bicycle Accessories

Even when riding on bumpy roads, the two arch sides and two round corners keep your phone in the mount. The universal bike phone holder can hold almost any cell phone up to a wide 3.7” It allows you to see your phone screen. There are holders that fit handlebar sizes from 1/3” to 1-3/4” in diameter. The aluminum phone mount is designed for power sports and will hold the phone in place. It can be installed on the handlebars of almost any vehicle on the market, such as motorcycle, mountain bike, e-bike, folding bike, scooter and etc. The rotating head allows for ideal positioning and easy viewing of the electronic device while riding. The quick-disconnect design makes it easy to remove the device. The rubber strips on the side screws will protect your phone from being scratched. The adjustment screws have been lengthened for a larger grip. The adjustment screws have been lengthened for a larger grip.

Brand: Ilm

👤I got this mount for my phone and it worked perfectly. I like that it's all metal, with rubber in places where the phone is contacted, and rubber shims on the handlebars. It looks solid, feels solid, and does not have flimsy plastic parts that I would be concerned about breaking. The screw mechanism to hold the phone takes a second or two to tighten down, but I think it's a more reliable system than those Silicone rubber bands. There is a The limited angle adjustment range is the reason for the 4-star review. The angle at which the arm is attached to the swivel is less than 35 degrees. It's hard to get your phone in a position where the screen faces you if your handlebars are not horizontal. I had to put a small bolt into the mechanism to wedge it. A cup/sphere arrangement like that of a RAM mount can give you an almost unlimited range of angles.

👤Excellent for my motorcycle. There are no plastic cheap parts. The metal is sturdy. Even when the phone is not mounted, it looks great. The phone is kept nice and tight. Blue Locktite was used on the bolts. A good one.

👤There are fake plastic ones that break on first use. Very happy with this one! There are metal alan-head bolts. My 2001 Honda Shadow 750ACE was mounted on it. The bolts on the side are easy to use. You only have to tighten one side once you fit the phone.

👤Excellent item, bought a couple made of plastic before, but finished broken by the motorcycle movement. This one surpasses the quality and look, all aluminum heavy construction, excellent grip, perfect fit in my Yamaha Raider. 100% Restoring..

👤The thing is almost perfect. The first surprise was the weight of the unit. I was expecting a cheap unit. It feels very sturdy and has a little weight to it for being aluminum. 2. There are no instructions on the box, but it is easy to install. Straight forward, that's not a problem. 3. Ottobox held my phone. I bought some phone bungees, but I don't think they will be required, as I didn't know what to expect when I ordered it on line. Time will tell if the side screws hold the phone in place. There is a If you want to run your phone vertically, it only adjusts up and down and doesn't adjust side to side. The phone sits on this weird angle compared to the rest of your instruments, but it's not a big deal if you aren't OCD or in my case CDO. If you have a section of straight bar that's over 1 inch, this isn't an issue, but the only place I could think of was the up sweep and pulled back angle of the bar. This makes the phone look like it faces the bar. If you don't mind running your phone horizontally, you can get the desired compound angle, but not everyone wants to. Product designers should be taking notes. I feel it is a good value for the money and it is very secure.

2. AONKEY Bike Phone Mount Motorcycle

AONKEY Bike Phone Mount Motorcycle

The ball joint design can adjust the bicycle phone mount in different direction to provide optimal viewing angle even on bright day. Shrinkable arms and a rubber belt make it easy to take a phone off on the mountain road. It can fix the handlebar with an upgrade mount with an aluminum alloy bolt and soft rubber pad, it is suitable for bike, motorcycle, electric bike, shopping chart, scooter, stroller, treadmill. Simply screw the aluminum bolt to fix the handlebars, and press the button on the side to open the arms. The Aonkey motorcycle phone holder can give you full access to the phone screen. Their universal cell phone holder for bike is compatible with all sizes of phones.

Brand: Aonkey

👤I bought one because my phone was blocking the treadmill display. I could easily transfer the mount to my bike after my run. I ordered a second one because the cost was so reasonable. The mount for weight lifting is being relocated because of the adjustability for viewing angle. Someday it will leave the house for use in an environment where it is not a problem. It works great indoors. The lower flap works well as a backup to the side grips but it will interfere with the phone jack on the bottom center. Charge before or after the workout. One hand release button. This phone mount is very good.

👤The thing is very durable and awesome. I haven't purchased anything like this in a long time and I can't say enough about the quality of this phone holder. It is very easy to hold my phone in an otter box defender case. The tuff material is very strong. If you are looking for a phone holder for your motorcycle, bike or anything similar, I highly recommend this holder.

👤The mount is made from sturdy material. I have only used it inside to mount my phone, but I would use it outside if I needed to. For increased security, you can use the elastic bands to mount the phone in the arms. I use a rubber case for my phone.

👤The IC Life Fitness bikes that my gym uses for the Spin classes are perfect for this product. I have used it twice now and wondered how I had not had this mount before. I don't use the gel holder part since the bike is stationary, but it makes teaching spin class easier.

👤I use my upright bike to watch training and entertainment videos on my cellphone. There is a The fit and quality of the device are great. I am very satisfied.

👤It is easy to install and keep my phone in place. It's attached to my exercise machine and it makes it so much more fun to listen to music, watch my TV show, or check out websites on it.

👤It keeps my phone stable when I use it on my rides. Climbing and decending 3000+ feet on my local mountains has posed no problem for this phone holder. The claw grasp system is better than other options.

👤I have a pop sockets on my phone that I use every day, so my options were to find an open-backed phone mount. I was able to find a spot on the left handle bar that made it easy to use.

3. Maxitino Motorcycle Handlebar Compatible Smartphones

Maxitino Motorcycle Handlebar Compatible Smartphones

The brand and service. Good service, new brand, high quality. They know it's a perfect product, so they can give a lifetime warranty. Premium aluminum alloy and silicone are used in engineered from high-quality aluminum. It is much more durable than a plastic mount. They want to make sure your cell phone is safe for the journey. Easy Installation: no assembly required. Attach the handlebars to your body, then locate and lock the nut. The bike phone mount can be adjusted to fit any direction you need. Can hold all cell phones from 7 cm to 9 cm. X-8 Plus, 8 Plus, 7 Plus, 6S, and 6S Plus. , various brands of phones, such as the S7 Edge, S6, S6, G4, etc. Also, note: Please measure your device width with your case before buying a mount. Silicone rubber protects your phone from slipping. The phone holder keeps your phone in place, preventing it from being scratched or trembled. It won't cover the phone's screen, buttons, and mic jack. A perfect gift for cycling, motorcycle, running machine, use it for gps navigation and positioning, enjoy music, sports and many other outdoor activities, make your riding journey perfectly.

Brand: Maxitino

👤Attach with stability and go ride.

4. Motorcycle Aluminium Bicycle Handlebar Compatible

Motorcycle Aluminium Bicycle Handlebar Compatible

The Dash Mount has a steel ball that articulates with the Steelie Magnetic Phone Socket or Free Mount that allows you to tilt your phone smoothly from landscape to portrait. The Claw is 17mm longer, it's perfect for all phones with a thick case and even some 4 to 7 inch phones. It is the strongest and most secure phone mount on the market because of the all aluminum frame. You can view your phone screen at any angle with the help of the rotation and tilt. It is easy to install on handlebars. Can be used on a mountain bike. The phone mount is lightweight and durable. It can fit almost all mobile phones. Double protection for your phone is provided by a Silicone rubber strap. Even when riding on bumpy roads, the two arch sides and two round corners keep your phone in the mount. Even when riding on bumpy roads, the two arch sides and two round corners keep your phone in the mount.

Brand: Gub

👤It was made by Gut. We've had a hard time finding a phone mount that will fit with a thick phone protective case. This is one of the best ones so far. The mounting arm is very secure. It allows for a lot of mounting options. We like that it's made of metal. Another thick case phone holder is made by the same company. It doesn't have as many adjustability's on the connecting arm. It works well. It is more rigid and stable.

👤The phone holder is easy to install. I trust this item to hold my phone while I ride my bike.

5. Universal Adjustable Bicycle Motorcycle Compatible

Universal Adjustable Bicycle Motorcycle Compatible

The high-quality aluminum alloy makes it harder to break, and it extends the service life by 12 times. The bike holder is made from high quality materials, it's not easy to fade, and more beautiful, let's together become a stylish outdoor sportsman! The road bike mount could fit any phone from 2.2 to 3.6 in. The width of the material is adjusted. It will protect your phone from dropping. The phone mount comes with three elastic butterfly bands to protect phones from scratching. There is double security when using two bands together. Three butterfly bands in three different colors can be used. A bicycle cell phone mount has a rotating head that makes it easier to see your phone. The display should be adjusted to any position or direction to have a full-screen view. You will not have to remove the phone from the bike mount phone holder. There is a Silicone rubber pad inside the handlebars to protect them from scratches. The diameter of the handlebar is from 0.6 to 1.35 inches. The rubber silicone material is soft and won't hurt your bike. It is compatible for bicycle, motorcycle, strollers, shopping carts, treadmill, stationary bike and ATV. It is compatible for bicycle, motorcycle, strollers, shopping carts, treadmill, stationary bike and ATV.

Brand: Trkimal

👤I am excited to show you the video of the bike phone mounts after one mount. I got this mount to compare to another mount. I like the butterfly on this one. It's very strong. It is very simple to mount, just your fingers. There's infinite adjustability after the 3 preset settings, which is why there's a adjustability that's so high. It should fit most handlebars. This bike phone holder is very cheap.

👤It is a great value for the money and is as sturdy as you can ask for. I don't think there's a mount out there that can hold up to off-roading. This is perfect for cruising. I have hit some big bumps. It is help up just fine. It is a great mount, the price is unbeatable, and I would recommend it to friends. Overall, very pleased. I bought the two pack for my roomate and you get multiple color choices of the rubber bands that go on each of the 4 corners of your phone, as a backup in case one breaks. The bands are very stretchy and do not feel brittle. You can break the plastic frame that cups to the bike frame if you twist it too tight. The notch where the two mount pieces come together can be moved to make it fit for bike frame sizes. The directions are easy to follow.

👤Don't be involved in a bike accident. Holds great so you don't have to reach and break concentration from a falling phone. There is near unlimited angles for that perfect view. It has a tight grip on the bigger phone. It can be used for gps, maps or to listen to music. The bands are not puppy prof, I chewed my favorite color before I ever got to use it. It comes with three. Happy riding and be safe...

👤We like riding our bikes around the neighborhood. I like being able to keep my phone on me and this phone mount does that without the risk of damaging my phone. It is easy to put together. You don't need anything else to do it. Extra bands in different colors are a bonus.

👤You get what you pay for. This is for my scooter. It spins very easily if you put it on. The screw had a plastic key turn on it. It was impossible to turn the screw without pliers. The rest is straight forward, but without rubber to go between the handlebar and the clamps, it's easy to spin. I wish the plastic on the bolt was not so cheap, it will be replaced later.

👤I love this phone holder. It's easy to hold the phone on the handlebars. The mount worked great on my 20 mile ride this weekend. When hitting bumps, it held the phone tight. The mount is easy to install. I can't believe the price... I was not expecting such good quality.

👤It took a while to test drive the phone mount. The mount to the bike was great and has 3 pivot points to fit on a variety of handle bars. I jumped a few curbs after putting in my phone. The screen moved from facing to the sky. The screw on the back cracked when I tried to adjust it. Maybe I put too much into it. Everything else was great. The elastic webbing held the phone in place, even though it was odd at first.

6. Universal Aluminum Motorcycle Handlebar Adjustable

Universal Aluminum Motorcycle Handlebar Adjustable

It is the strongest and most secure phone mount on the market. The Four Edges are made with Eagle Claws, which make your phone much better protected. The structure is cross-shaped and it fits the pedestal perfectly. It's compatible with any phone with aGPS of between 2.17" and 3.94". Cushioning a patch for a phone can reduce the amount of phone scratches. The phone mount can be fixed in a horizontal or vertical position, just turn the cradle 90 degree to adjust the display to your best viewing angle, allowing safe hands-free phone access on the road. It's easy to mount to a bicycle handlebar with a tool-free installation. You need to install an accessory if the bar is too small.

Brand: Gub

👤After the install, I rode my BMW s1000r for a few hours listening to music, but suddenly the music stopped and I saw something black fly past me. I knew it was my phone. The screen was shattered to a thousand pieces. The price of this holder was not $13,000 but $1100.00, which is how much it would cost to replace my phone. There is a Buy it at your own risk. There is a I don't think it's a good product.

👤Wow. A good piece of gear to hold my cellphone, it is very durable and a good price. It arrived in two days. The east coast. I'm going to use an old phone as a bike computer. I like how it mounts. The stem is only 23mm in length. The version that allows the phone to rotate has a longer stem. If you have carbon bars, you have to be careful with the mounting of the brackets. You should tighten it to 6Nm. The std diameter of bars for a road bike is 31.8mm. There is also a way to mount on a smaller bar. It only weighs 3.5oz. My phone is 4.2 ounces. There is a Four of the rubber pads are used to affix the little feet that hold the phone to the package. Two are extra. There's a longer screw to mount it on the bike stem. I don't know if that screw will fit my headset, but I'd rather have my phone farther forward anyways. There is a I don't have to pay $250 for a bike computer. The total weight gain is related to the fact that I always want to take a phone with me. There is a The review will be updated after a few rides.

👤The quality on the first impression was very good. It looks like it is aluminum. It is a little difficult to install because of the handlebar. I was able to fit it over the smallest part of the handlebars. I could be responsible for not reading the instructions. For a tight fit, there are plenty of sleeves. The version I bought looked like it wouldn't stick out from the bar. I could put my phone in a landscape view. The screws can be tightened with Allen keys. You can't change the orientation without an Allen key. There is an update. I would love to give this another star. I skidded into the pavement after my bike flipped after I went over a bump wrong while riding my bike. The mount held the phone. The corner of my case was roughed up.

👤Not impressed with the mount. The screw that is needed to use the mount with the clamp was not usable because metal was covering the shape where you insert the allen key. It's annoying when you are waiting for days for an accessory and are confronted with it. Does anyone really need to go to a hardware store to find a suitable fastening for a product that is advertised? You would be forgiven for thinking that it's possible on the fly if they show you that the mount can be rotation on the clamp. You will need to loosen the screw holding it to the index in 90 degrees to make it work. If you have a nice headset, you will end up with a mount that protrudes out the back of your stem/headset cover. If your stem/headset cover is domed, you may fare better with mounting. It doesn't look like a well thought out solution. There is a The claws are short, will work well with a bare/naked phone, but one with any case on it, there is less confidence that the mount can do it's job unless you don't mind squeezing down on the clamp for peace of mind. The mechanism for the screw is flimsy. If you don't have a phone mounted, you should tighten down all the way closed. The adjustment screw tends to loosen when riding, so I would have expected a more firm feel with it.

7. Bike Phone Mount Adjustable Motorcycle

Bike Phone Mount Adjustable Motorcycle

The bike phone mount has 4 high strengthstainless steel arms with corners claws to hold your phone in place on the bike mount. To make sure your cell phone stays securely attached to your bike handlebars even on a bumpy rocky road, you must use an aluminum alloy nut and rubber gasket. Safety and stability are important. It's easy to install the bike phone holder without any other tools, just put it on and remove it. The bicycle phone mount comes with a clockwork that can be locked or unlocked. Convenient operation. You can adjust your phone to any angle that suits you, with the RYYMX motorcycle phone mount. The RYYMX bike phone mount holder is compatible with any cell phone with a screen size 4-7 inches. Only support the phone that is under 0.47" You can adjust the size of the clamp to fit your handlebars. Shockproof Protection Silicone pads keep your phone safe from scratches and vibration. The motorcycle phone mount holds your phone.

Brand: Ryymx

👤I know a good phone mount when I see one. The mount is great. I'm buying three more for my bikes and scooters because I like this so much. I want to see what this company has for cars. There are things that stand out. The quality is better than one would expect. The plastic is made of plastic. The metal arms are very strong. Everything works with precision. - The $900 phone is safe with this thing. I put my S8+ on top of Note 8. Both were secured in the corners. The lock switch has a bonus tip. Push each arm into the corners. The switch is on the back. The phone mount is very secure. The mount comes with rubber strips so you can tighten it. I feel better using this mount than I do with all the others I have, for example, those where you stretch rubber bands on each corner. The locking metal arms are better than those. There is a bonus tip. I still secure my phone to the bike with a lanyard that I fastened to my phone's case regardless of how confident I am with this mount. The lanyard might save the phone if the mount fails.

👤It was very easy to install on my motorcycle. It looks neat and firmly holds the phone. I like the lock feature. This holder was a great deal and I highly recommend it.

👤I was worried that this product would not be able to work on my KLR650 since it costs so much, but I was pleasantly surprised to see one that was so cheap. I thought I would try it, my biggest concern was the phone falling, so far it's stable and nice, but I would definitely recommend it.

👤For a long time, I wanted a mount for my phone so I could listen to my music. I was riding my bicycle. Even though it was a little pricey, this mount had good reviews. It is easy to install, I love that about it. It is removeable and no special tools are required. The security "arms" don't block your screen. I have a phone. The mount fits my phone very well. The arms take some getting used to because you have to make sure the button is in the right position to extend them. When you release the button, the arms will open. The mount is in place while I ride. It comes with a lot of shockproof pads to make sure your phone is safe. The instructions on how to install the mount were not clear.

👤The holder is fairly simple, but not perfect. The mount is flexible and will fit most bikes. The arms that hold the phone are spring loaded. There is enough padding to protect the phone. It is easy to put the phone in the mount by spreading the arms, but it is more difficult to remove it. It is difficult to spread the arms without thinking about the phone. The locking tab is difficult to operate and it is in an awkward place. There is a Overall an adequate holder, but with limitations.

8. Universal Bicycle Handlebar Samsung Smartphone

Universal Bicycle Handlebar Samsung Smartphone

Touch ID andFACE ID are used. The phone holder is compatible with the Face ID sensor on the Apple phones. The Bike Stem Mount is designed to turn your phone into a professional cycling computer. Flexible silicone bands fit most phones and cases between 4 to 6.5 inches. Rugged cases might not fit larger phones. Soft-touch silicone material absorbs bumps and protects your devices and accessories. Buy with confidence with their 100% satisfaction policy. They can offer a replacement or refund for quality issues.

Brand: Bone

👤I was expecting this to work as well as it did. I mounted it on the stem of my bike after I used it with my S8 in an otterbox. Most of the 100 miles were on gravel roads and trails. The phone felt flimsy when I first put it in place. I rode it down the alley and it seemed to hold it in place. I kept it on for my tour. I was able to view my phone, which I used for navigation. When I went down a steep descent, my front wheel sank into the sand. The crash twisted my brake levers and put a big hole in my helmet, because I went flying over the bars. I was expecting to have to look for my phone after the impact, but it was completely undamaged.

👤I used it this morning on a 22 mile ride after buying it yesterday. The corner bands are so close to the edge of the phone that I was afraid it would go flying. Even when I reached around the back to use the fingerprints on my phone, it held up. I hit some substantial bumps as well as some repetitive vibrations and it held my V40 thinQ securely the whole time. I am happy with this case, it is better than my old one. There is a I have had this phone holder for about a year and a half. The corner bands just broke. The cycling season here is about 9 months long and I have probably ridden 7k miles since getting this phone holder. I feel like I got my money's worth even though it broke. I love the design of the one I am reordering. This one covers the finger print sensor on the back of my phone, so it works perfect for my phone. I can't switch to facial recognition because I have a bug shield on my bike helmet, which covers the top half of my face. I have a Pop Socket on the back of my phone case that fits on the holder without a problem. I am willing to pay a higher price for this one since it works better for my phone, even though I think it is overpriced.

👤I had a bar mount on my other bike. I have ridden about 100mi with this stem mount. It's great. It works great with my phone. It's easy to get the phone in and out, just practice. There is a The mount is quite secure, but the phone does move a little on the bumps. I like the new design of corners and can use a finger. This is a great bargain, works with any case, and seems like a far better solution than the "twist lock but you must use our case" option.

👤I have a mount on my phone that holds it perfectly, and I can use the tap and glance to open it, it's ready to go. The phone is held in the mount to the stem cap on my bike. I have taken a lot of bumps, drops and bunny hops.

9. Metal Bike Motorcycle Mount Unbreakable

Metal Bike Motorcycle Mount Unbreakable

We mean out and out universal, which means mount any phone to any bike or motorcycle with tubular handlebars. The holder can fit any device up to 3.7" wide and all handlebars from 0.6" to 1.3" in diameter. There are no tools required for installation. AJUSTABLE GRIP. You can adjust and secure your phone in any angle thanks to the special ball and brackets. The clip has extra secure and soapyabsorbent that is firmly and securely held. The band wraps around four corners of a cellphone. The phone won't fall, make the most extreme ride. The bar is strong. While your device is mounted, you have full phone access. You can use your phone for music. You don't need to unmount your phone or ipod. You should keep your hands on the handlebars. 100 to be safe! If you don't like your new bike phone mount, just contact them and they will make it right.

Brand: Caw.car Accessories

👤I have mounted this product to my Harley Davidson Sport Glide for several days and have been using it for over 200 miles, and it is the best phone mount you can buy in this price range. The pros and cons are listed. Unless you have a ball/socket lock nut that is completely tight, the sockets can easily be pulled off of the ball mount. 2. The metal handle bar mount I ordered was made of plastic. 3. If you want the rubber padding to fit around the handle bars, you have to remove it. I have a bigger phone than the one I have, but it probably won't fit. There is a The pros are 1. It is possible to change it. Even with the sun glare, you can find a sweet spot to get the glare off the screen with the ball and sockets style mount. Price 3. The installation process is easy. Attach and detach the phone. When I first mounted it, the ball and sockets would easily pull apart and give me, so I was a little worried about ordering the product. It is probably not tight enough if you think so. You will know it is tight when you can hold the phone mount and pull it with a lot of force. I give my phone a test tug every day before I mount it, and it has been perfect ever since. There is a I gave the mount a 4 star review because of that. Someone who doesn't know any better might think it's tight enough and it isn't, next thing they know their phone is lost somewhere on the interstate and broken You should order the metal mount.

👤There was an update on 9/29/21. I will leave it at three stars, but I can not recommend it. The screws that hold the whole unit to the handlebars failed. I was able to keep my $1200 phone because of my reflexes. It will be fine if you use it on a bicycle, but not a Harley. I would pass on this one. Sorry. I was going to take a picture, but it looks like something out of a movie. I was hesitant to buy one of these things. I didn't think I wanted it. I will not make a phone call from my motorcycle. I don't use my phone for navigation. I use the phone to listen to my music. I put a Bluetooth accessory in the rear bag of my Ultra Classic. I can play my music on the stereo system. I don't care about being able to use the phone at all, I just want to skip songs. I think that's correct. I know, it's pretty silly. There is a I am not impressed by the quality. The first time I attached the unit to the bike, the plastic knob broke. Not the end of the world. I used a screwdriver. Not a good sign. It seems like it might be okay. I like the rubber X piece that holds the phone by the corners, it grips the phone tight. Occasionally, Iobble a little bit. We will see how it holds up. There is a I'm not sure if I would buy it again. There is a Thank you for reading.

10. Metal Bike Motorcycle Phone Mount

Metal Bike Motorcycle Phone Mount

You can mount a cell phone to any bike, motorcycle or ATV with tubular handlebars. There are no tools required for installation. The extra secure clip has silicone belts that grip the phone firmly. The phone will not fall if you make the most extreme ride. AJUSTABLE GRIP. Simply adjust and secure your phone to any angle and position that suits you, and enjoy the comfort of your ride! Full phone access includes screen, buttons and mic jack. You don't need to unmount your device. You should keep your hands on the handlebars. 100 to be safe! If you don't like your new bike phone mount, just contact them and they will make it right.

Brand: Caw.car Accessories

👤So far, so good. I was worried about phone holders after the last one broke and I had to catch my phone. I am starting to trust this one because it is metal. I am attaching a note to the holder. I can mount the phone in many different places. I mount it horizontally to be able to take video while riding at slow speeds, but feel confident in saying that video at higher speeds could be taken with the right phone case. It's at least good enough to get a liscence plate of a vehicle. The holder has an issue with the bottom clamp hitting the button on the note 8. I have a headset in my helmet. A short video of my first trip out with this holder was included. I need a new phone case and I need to change the holder. The plastic water proof cover is moving. The video would be shaky if the holder wasn't good.

👤The product is wonderful. It was exactly what I needed and it was better than I thought it would be. I don't want it to be any better. I always appreciate a good product, and this is one of them. The unit that holds my phone and the one that holds my handlebars are both made to hold my phone and handlebars securely. I use it for navigation on and off the road. Thanks again for the great product.

👤Great mount! Sturdy is made from steel and other rugged materials. It doesn't loosen itself even under continuous vibration. I replaced my shoddy McGuyver mount with my new Claw because it takes me about 90 minutes to cut my lawn. There is a safety warning. Do not do this. It is unsafe to use a power tool without proper training and your full attention, so obviously this is just for your rest breaks. There is a The elastic loops around the corners of the phone are holding it together, and the spring-loaded tension claws seem to hold well by themselves. If it works well on a dusty machine, it will be even better on a bike. There is a It has a simple, secure design and feels solid. I hate plastic from overseas markets, but burley is still sleek and functional.

👤I've had phone mounts for my vehicle. The mount pivot snapped because of 7 hours of constant vibration, but my last one remained attached. I came up with three criteria that needed to be met by my new phone mount, one of which was strong enough to not snap or break while holding a large phone. For 8 hours a day, stay fixed in position for navigation. It had to be able to mount onto a 1.7" roll bar to remain attached. I am happy to say that this mount accomplished all three with flying. There are colors. I spent 7 hours on a trail yesterday and we felt like we had spent the day riding a jack-hammer. The phone did not move. Any. Not the least bit. This is amazing, considering the large size of my Note 9. There is a The mount is sturdy. It has an extra pair of mounting bands. I was initially concerned about the stretch for my phone, but they worked well. Cawcar provides an extra pair that is stretchy and durable. I intend to use this mount for a long time, so I will add a few more sets.

11. Vibrelli Universal Bike Phone Mount

Vibrelli Universal Bike Phone Mount

If you don't like your new bike phone mount, just contact them and they will make it right. Bike and motorcycle compatible handlebars are from 0.9” to 1.3” in diameter. The bike and motorcycle phone mount is great for scooters, ATVs, e- bikes, road, and MTB. It fits any phone up to 3.8 inches wide. The bands are firmly grips. The bike phone holder is guaranteed to hold large phones. The design has three silicone bands and strong side clamps. The bicycle phone mount looks great. It is the perfect bike or motorcycle phone holder. The bike phone holder doesn't block screen access. You can use your entire screen, buttons, and headphones without removing your device. The motorcycle cell phone mount has a ball and sockets that can be adjusted to any angle. The 5-year manufacturer's warranty is why the bike phone mount is built to last. Cyclists designed it. The 5-year manufacturer's warranty is why the bike phone mount is built to last. Cyclists designed it.

Brand: Vibrelli

👤I wasn't sure if a less expensive product would be able to keep my huge phone. This product has exceeded expectations, even though it is attached to my handlebars, and is held still enough to read/use while biking. The center grip closes tightly around the phone. After attaching all 4 corners of the rubber piece, my phone has become a bike. The phone and mount have not slipped on my handlebars or out of the mount. If you take a few extra moments to secure it properly, you've got yourself a top-notch product for an extremely reasonable price. They include 2 extra rubber rubber. If you happen to break one or two along the way, you need to mount "nets" for when the primary one experiences natural wear and tear.

👤I was worried about how much of the product was plastic but so far there have been no visible cracks or breaks. It isn't designed for skinner handle bars like on hondas, but lucky they provide 3 rubber filler strips I sandwiched together to get a snug fit onto the handle bars. Installation took under 4 minutes. I was able to do it in the middle of the night. The rubber net is a good fail safe if the phone is knocked loose. On a windy day, I took this up to 74 mph on a naked bike and it stayed in place. If you hit your arm against the mount while dismounting your bike, it's sensitive, but for the price, it does everything. I use a thick UAG trooper case for my phone and it pushes the limits of the mount by at least 85% and the rubber net by at least 90% to help people figure out what size phone can fit.

👤I have a large and expensive item. I wanted to use it on my ride. I'm afraid it will fail off. The rubber securing the product made me take a chance on it. I love it! The phone is immobile. I can now play my music through my headphones. I don't lose the connection. I bought a second one for my bike. If you've ever been on San Diego streets, you know how bad they are. Again, rock solid. Love it.

👤The phone mount on their website is $68 and I didn't want to buy it for my scooter, which is URB-E. I thought I could go wrong with this one, even though it was more positive than the other one, but I bought it anyways. The average bike bar is larger than my URB-E's Mount bar. I used all the rubber seals that came with the phone mount and it worked well. I commute to work every day. Two and a half blocks from my first train, I connect to my second train, and then I ride my scooter through Hollywood to West Hollywood for 2.5 miles. The roads in Hollywood/West Hollywood are really bad and this phone mount holds up and handles the bumpy ride really well. You can't beat the price, I'm very happy with this purchase. It is amazing! I highly recommend. I didn't need to read any instructions as it's very easy to understand when you look at the pieces in the box. The packaging and shipping were all good.

Summary

What is the best product for bicycle cell phone holder handlebar blue aluminum?

Bicycle cell phone holder handlebar blue aluminum products from Ilm. In this article about bicycle cell phone holder handlebar blue aluminum you can see why people choose the product. Aonkey and Maxitino are also good brands to look for when you are finding bicycle cell phone holder handlebar blue aluminum.

What are the best brands for bicycle cell phone holder handlebar blue aluminum?

Ilm, Aonkey and Maxitino are some of the best brands that chosen by people for bicycle cell phone holder handlebar blue aluminum. Find the detail in this article. Gub, Trkimal and Gub are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com