Best Bicycle Brake Cable Housing

Cable 6 Dec 2022 10+ Comments Open

1. SHIMANO Brake Cable Housing Black

SHIMANO Brake Cable Housing Black

Works with either of the two. Teflon coated cables. Includes housing and cable ends.

Brand: Shimano

👤The cables and housing are of good quality. My road frame had plenty of cable and housing. I don't think the cable is coated in Teflon, but rather it isstainless? Steel cables and housings. The feel of your brakes can be changed by the housings. You should grease the cables, but the liner makes them slide. I cut the cables down to size by holding the cable against the housing with a pair of channel-locks and pulling the lever to the bar a few times. Before you cut the cable, be sure to put it into the housing. I only had to get the cable position right the first time, as the adjustment stayed put. There are only two o-ring sealed housing ferrules, which is why these don't get a five-star review. I only had two o-ring sealed ferrules on hand, so I used them at the lever side. What do they want me to do? The cable ends are ugly, but they get the job done. I've used ends that were less dense.

👤It works perfectly, as with any. Use a short length of cable so the housing doesn't get crushed too much, then use an ice pick to smooth out burrs at the cut/crushed end. Basic black housing is fine, but I'm glad that Shimano is offering unique colors that can be used in Transition areas or just in crazy crammed college racks.

👤The cable for the front brake was too short to reach the calibers at the end of the fork, so I had to use the disc brake. The rear brake was very long. Cut down the old rear brake to get by, but will need to look for another option in the future.

👤The best brake cable you can buy. It lasts a long time between changes. It's not necessary to adjust the brakes after the first couple of uses. A good quality cutter is needed to prevent the casing from being crushed. There are a lot of colors. I use white on my road bike, grey on trainer bike and black on my gravel bike. All of them had a lot of mileage.

👤It is not possible to beat the original Shimano PTFE Brake Cables. A fresh cable replacement is a great upgrade. Everything in the package is complete.

👤It's perfect for the Dura-Ace 7900. There were all required items available. Excellent price. The parts are original.

2. EASTERN POWER Bicycle Universal Mountain

EASTERN POWER Bicycle Universal Mountain

The tension on the new cables should be adjusted well after installation. The cable end crimp prevents it from being scratched. The cable end caps can be used to fix the incision. The coated brake cable housing is 2450. Enough for you to meet your desired length. The length of the cable is 1.1m, the diameter is 5mm and the length is 2.50m. Bicycle brakes cable and housing can be used for both mountain and road bikes. The package includes Brake Cable Housing, 2 x Brake Cable, 6 x Housing End Caps, 5 x C clip, 2 x S clip, and 1 x Isolation Protection Clip.

Brand: Eastern Power

👤The set comes with one short cable and one long cable, so I think they missed the fact that the cables are too short. The shortie is for the front and the long one is for the back. There is a When cutting the housing does compress, but just use a sharper cutting implement and have something to ream out the housing when done. It's very easy.

👤I have a Rock Hopper mountainbike that won't work because the cable holders are too thin. I need the mountainbike version that is equal in diameter to a regular bmx bike, apparently the new bike design is to reduce weight and cost. The clarks cable has more strength than the STAINLESS cable, but it has less weight. It seems like a good set if you don't have cable holders larger than 5mm.

👤The cable is too short to reach the rear brake on a full-size 27" road bike. I threaded it through after cutting off one end, but it didn't reach.

👤One of my electric fat tired bikes was damaged and now it's not working. If I was going to buy another product for my bike, I would choose this company.

👤It's easy to compressed. I can't even lock up the rear wheel because I'm using 105 shifters/brake levers with nice Spyre disc brakes. Don't waste your money on it. If you want to do it right the first time, buy the real Jagwire.

👤They only send one housing and it wasn't enough for the front and back brakes on my Schwinn Scooter. That was a bit of a bummer. The long cable isn't long enough to reach the back brake. Say HUH? This took a long time to arrive and now it won't work. You can choose other.

👤It looks great, my blue grips and bottle holders are enough to do all the cables.

👤I ordered this cable to fix my bike. The picture shows what I received. There is a mess of grease and gobs of stuff around the inside of the bag. Absolutely useless, and should never have been shipped out. I should have given one star.

3. Star Art Housing Mountain Bicycle Cycling

Star Art Housing Mountain Bicycle Cycling

The cable end tips are practical and durable. 2 x 1.8m brake cables, 1 x 3m brake housing, 6 x Ferrules, 6 x Cable end caps, 6 x C-Clips Buckle are included in the package. The slick cable is made of steel and has more braking power. The cable for the front and rear brakes is long enough for a custom length. 3000mm is long enough to keep your desired length. If there is a problem with this product, please contact them.

Brand: Cuteexpress

👤We keep this bike outside all the time. The original rear brake cable had a lot of problems. The cable was perfect. The handbrake lever has a "lug" at one end. The cable was about a foot longer than it should have been. We followed the instructions after finding a video on the internet. It worked out well. The critical rear brake feels new. I was surprised it was so easy. The product should have directed us to a video. There are millions of bike videos. We used theBrake Caliper Mounting & Adjustment - Linear Pull & V Brake.

👤There's not much to say. The value was great for everything. I replaced the entire brake cable system on a fixed gear bike. Since the cables were replaced, the bike has gone over 100 miles and there have been no issues.

👤The cables and housing are of top quality. For the guy or gal that has an old Huffy or Schwinn that needs new brake lines, this is perfect.

👤The cable end is smaller than I had on my bike. It will work for now because the jury was rigged. The diameter of my cable is larger. I've read that the cable is typically a smaller diameter. It worked but not a good replacement. I'm going to the bike shop next time.

👤I had to replace one of the break cables on my wife's bike. Housing, cable, and other things. All was good. Exactly what I needed. Would buy it again. Prompt delivery is a good buying experience.

👤Came quickly, in good condition.

👤You don't need anything more than the bicycle, wire cutter, and wrench.

4. Universal Bicycle Transmission Derailleur Mountain

Universal Bicycle Transmission Derailleur Mountain

Their goal is to provide excellent products and satisfactory service to their customers. They will do their best for you if you have any questions. The bike shift derailleur cable and brake cable are made of quality material, they are heat and rust resistant, and they are great for long-term use. Variable speed cable set has a 2 m transmission cable shell that is 4mm thick, front transmission length is , interior wire of rear variable speed is 2.2 m, their length can be clipped to a proper size that meets your needs. The front brake cable is 1.1 m and the rear brake cable is 1.8 cm. You will get a 2 m transmission cable shell, 2 pieces inner variable speed cable, 1 piece 2.5 m brake wire outer tube, 6 pieces O rings, 8 pieces tail ends, and 21 pieces cable. The scope includes mountain bike, road bike, small wheel bike, foldable bike, good for maintenance cables. You can clip the inappropriate end off if the brake line is double-headed.

Brand: Boao

👤It was installed and it worked perfectly. I needed to buy a specialty cable cutter. The thicker of the two cables is for your brakes. They give you enough to do two bikes with the double package and 5 times as many bits as I needed, so great value for the money. The blue is very bright and looks great on my bike. If you take it one cable at a time, remove the old cable but leave the housing alone and replace it from one end to the other, it's easy to install. Never done it before. I was able to figure it out by taking my time with the first couple, they're made to be good, so you can do it yourself if you don't know how.

👤The British Woodrup bicycle was built in the 1980s. The ancient brakes I was using did not work with these cabled. The drum at the tip of the cable was smaller than the drum on my old cable and therefore did not fit the brake handle mechanism. The job I was supposed to do myself had to be done at a bike shop, where they used the news cables, and they had to install new brake levers. The job cost more than I expected, and included cables and brake levers. These cables are not universal. If you have an old bike, even a top of the line one like I have from decades ago, you may run into the same trouble.

👤This set up was something we were very interested in. We were worried if the cables would fit our bike. It did. The cables come with two different ends, which is the greatest thing about this set up. The only thing you have to do is cut the end that is not for you. There were many ends and tidbits with this set up. Just buy it! It's the best bang for your buck. Bike stores charge a lot, and usually per item, not in a package deal like this.

👤My old schwinn is being fixed. Extra end caps, cable ends, and cable housing were included in the cables. I cut one piece too short and had plenty of extra to use. Update! I swapped the cables on my car and they worked perfectly. I need to buy these cables for my bike.

👤I am a bike restorer. I restore bikes. I have used these cables on several restorations. They look good and perform well.

👤The cables seem to be okay. The housings are small and the interior diameter is narrow. It is more likely that a cable will pinch or crimp in normal operation and that it will cause a decrease in brake performance. I don't recommend.

👤It was bought to replace cables on a vintage car. The cable and cable housing are of good quality. I would buy again.

👤There are 2 sets of cables. I only need the brake cables now, but I will need derailleur cables later.

5. Shimano Universal Standard Brake Cable

Shimano Universal Standard Brake Cable

They can adjust the size at will, and the specially designed Velcro won't cover the reflective strip, so no matter you are. Universal set is for mountain bikes or road bikes. The inner wires are made of steel. Black cable housing with 5mm 2 x Steel cables with a length of 1 x 1000mm and a length of 1 x 2050mm. 4 Ferrule's and 2 cable tips.

Brand: Shimano

👤I'm surprised when I see people run cheaper cables. It makes no sense to save a few dollars and run cables cheaper than Shimano, for example, if you prefer comparable brands like Jagwire. There is a The kit includes two brake cables with compatible with mountain or road applications, one very long length of housing, 4 end caps for the housing, and two cable ends caps. I prefer 6 caps because I like to run caps into my brakes if possible, but 4 is enough, even if Campy requires it. I assure you that you'll have enough left over to run housing for your next application, if you're careful with how you cut your housing. You get a lot of housing in this kit. The kit can be installed in less than 30 minutes for anyone who is mechanically inclined. Less than 20 minutes if you work on bikes often. If you don't change out cables and housing often, you should use a good pair of cable/housing cutters. Don't use a specific cutter, just use a quality pair. If you don't, you're going to have a hard time cutting your housing and you'll end up damaging your cables. If you don't have a paid job and want something cheap, Amazon has a cheap pair of Stanley cutters as an add on that are perfectly fine for this type of application. There is a The kits are very easy to install. They are the cheapest cable and housing kits that are acceptable.

👤I didn't know how this would work with both Road bikes and off road bikes. I engaged the brain and figured it out. You have two cables, one short and one long, each with a end for a bike. You have to cut off one of the ends to use the cable. Road bike cable! You should have some cable cutting tools with you. There are a lot of cable cutter for sale on Amazon. Cut off the ends of the old cable if you don't want to throw it away. I think you will find your linesman ply to be less disreputable. You will find the housing crushed closed even with cable cutter. You should have awl on hand. The cable housing on my road bikes goes from the lever to the front of the frame. The cable goes from the back of the seat tube to the break. The kit comes with only 4 housing ends, so you need a total of 6. I checked with my local bike shop and they had a lot of loose things. I got two there. Problem 2 was found by me. The housing ends that come with the cables are too fat to work with my 105 brakes. I got two ends from the local bike shop and they worked just fine, so I decided to buy a couple of ends from the shop. There is a The housing is very smooth and seems to have a liner. There is a How complete is the kit, three stars.

6. Universal Standard Professional Mountain Accessories

Universal Standard Professional Mountain Accessories

The package includes Brake Cable Housing, 2 x Brake Cable, 6 x Housing End Caps, 5 x C clip, 2 x S clip, and 1 x Isolation Protection Clip. The complete replacement set is 2 million lengths. The Universal standard is the Brake cable, each cable consists of 19 wires. The cable end tips can be used to keep cable ends nice and tidy, and the donuts can keep your bike out of the grind lacquer. PREMIUM BIKE BRAKE CABLE Each cable is made of zinc-coated, it's sturdy, provides better braking force, and could last long time use. Premium brake cable for your bikes. The bike cables kits can be cut easily to match your bike, perfect for front or rear gear and brake. The inner cables are long enough for Mountain bike, BMX, MTB bikes, Kids' Bikes, Folding bikes, city bikes, like the common, be remember to use the crimp to cover the cable end after installation. There are weapon tips. The bicycle brake cable kit is good for better braking and smooth operation, please adjust the tension after installing the new cables. If you enjoy your ride, wear the caps on the cables to prevent the cable end from being scratched. There are weapon tips. The bicycle brake cable kit is good for better braking and smooth operation, please adjust the tension after installing the new cables. If you enjoy your ride, wear the caps on the cables to prevent the cable end from being scratched.

Brand: Mamakoi

👤These cables seem to be well made and slick. The accessory kid has various ends. There is a They are not described as "Universal". They only fit mountain-bike brake levers with a barrel-style end. The smaller end of the road brakes is shown in the photo. You can use whichever one of the two are required. These are only for MTB. It's hard to complain about the price. Wrong description.

👤The cables, crimps, etc. were described in the description. The 1990s mountain bike will be updated after I test the bike's durability. It seems like cables seem good. I have used these for 5 weeks now. Work well, no complaints. The price I paid was very reasonable. Writing a review is part of a promotion.

👤I bought the inner brake cables for the kick bike. I needed a longer cable for the rear brake. These were the things I needed. It was installed as usual. I built this bike in the beginning of winter so it won't be used until spring. They work as usual.

👤I live in the California Coast Redwoods, where plastic is the only thing that will rust. I have to replace brake cables every other year. The cables from Amazon are just as good as the ones from my local bike shop, at a fraction of the cost. Highly recommended.

👤The product was used to replace a brake cable. The product is in line with the description. The price is correct. The delivery could not have been quicker. My son-in-law knows how to use the cables that were purchased. The walker was repaired by him. He received the excess cables in the package.

👤It is easy to install and use. I don't know about durability, so I gave it 4 stars.

👤Nice package. It has all the little bits needed to do a good job.

👤What was advertised? Couldn't use cap ends, but thought it was possible to fix a very old bicycle.

7. Jagwire Universal Sport Brake Hyper

Jagwire Universal Sport Brake Hyper

The feature is fine appearance, good braking effect, noiseless, safe, stable, comfortable and convenient. Professionals use it. The materials used are the highest quality. The most trusted brand in cycling.

Brand: Jagwire

👤My application was filed in 1990. The Trek 720 Multi- Track had original brake and saddle cables. The Jagwire cable is thinner than the galvanized cables I replaced. The Jagwire cables seem to be ferritic, which is higher iron content, so they will eventually oxidize, but not as quickly as galvanized coated carbon steel cable. The cables are double-ended, so they need to be cut. Also, note: Side-cut pliers or a cold chisel will not work in this application. Make sure you have a set of cable cutters that are sharp enough to cut the cable. Round the end of the sheath so the cable won't rub. I can't speak to the effect of the outer sheath's construction because most of the cable runs are open. I only have a small amount of sheath at the handlebars. I found the product to be exactly as advertised and just test driving, they seem to be an improvement in my perception of solid pull to the brakes.

👤It would be better if Jagwire would care enough to send me a black housing that I paid for. They sent me a gray cable with a sticky label that said "Black" on the packaging. There is a The housing was not made black because you covered the sticker "Gray" with the one saying "Black". That's not how you change the colors. I had never replaced the brake cables before. The kit had everything I needed for the bike. I didn't buy cable or housing cutter because I found a better way to cut off a disc on YT. I simply marked the cut line with a blue marker and inserted the new cable into the housing, then carefully cut off the cable with the cut-off disc. There is a I cut the cable again after installing it and adjusting the brakes to prevent the inside jacket of the housing from flattening, but the cable cut was just to prevent the flattening of the inside jacket of the housing. There is a The old Ironhorse department store cable is about 50 percent more dense than the real one, so thats good. There is a The quality of the kit was outstanding, even though I received a wrong color.

👤I saw pictures of the Carbon Silver color on the internet before I ordered it. There is a If you're interested in figuring out what it looks like, here it is. The carbon silver is a mix of silver and gold with a yellow tint. It is sealed in a sort of soft plastic or rubber coating, but it is very thin. I was hoping that the shadows on the braided metal surface would be thicker. I think it will become dark over time since the outer coating material looks transparent. I did not see any blue tint in the lighting. There is a It looks a little dirty and not that thrilled with it so far. Hopefully it matches better when I install it on the bike. There is a The brake cable and housing are not very thick. In my case, the other ferrule endcaps fit. There was no rubber or plastic hosing.

8. BlueSunshine Housing Mountain Bicycle Cycling

BlueSunshine Housing Mountain Bicycle Cycling

The ideal replacement for Mountain bike is a cable pipe installation. 2 x 1.8m brake cables, 1 x 3m brake housing, 6 x Ferrules, 6 x Cable end caps, 6 x C-Clips Buckle are included in the package. The slick cable is made of steel and has more braking power. The cable for the front and rear brakes is long enough for a custom length. 3000mm is long enough to keep your desired length. If there is a problem with this product, please contact them.

Brand: Bluesunshine

👤Not having many bike tools on hand, I figured out a way to cut the cable housing cleanly with a metal cutting blade in my chop saw. The cable cutter was for $11 at Home Depot. I saved the brake cables from Jagwire, and re-used my existing cables for my brakes. I recommend the kit as a solid and reasonably priced product, even though I did not get a response to my email about the product. My project was to convert a mountain bike to a cruiser.

👤If you have a BMX bike that has a bad gyro setup, just run straight cables. The majority of mongoose bikes have 900 adjustments and the brakes are the biggest complaint. The brake cable kit is worth a lot. The wire is very well made and the cable is thick. Make sure you know what you want to do. Purchase a cable cutter or use a Dremel with a cut off wheel. Make sure you wear eye protection.

👤The Blue Sunshine Brake Cable Housing Kit comes complete with clips to hold the cable in place. The linings on the housings make it easier to operate. Bicycle tools such as housing cutter and cable cutter are very helpful if you don't have experience with this type of installation. You risk improper installation and a dangerous brake system if you don't have the above. I would recommend this set to a friend.

👤Yesterday I installed the brake cables. It's easy to do. The cables are thinner than the ones on the bike. Will they last? Who knows? The old ones didn't break, they just didn't slide as smoothly as they should have, so these might be fine. I would be more confident if they were the same parts as my bike.

👤The cables I received will only work with a mountain bike. The road bike brake lever is not compatible with the cable end. The cable and other parts of the brake housing are low quality. I can't recommend this item.

👤The kit has 2 cables, sleeves, and ends. You don't need to replace the cables. Be sure to solder the cable where you are cutting it. I learned the hard way, that should be the only instruction in the kit.

👤I fix bikes for kids in need. I had a lot of mongoose BMX bikes. You almost can't tell they were there because you used these to skip them, and took a grinder to the left over ring. It was very easy to install. Will definitely be buying again.

👤Jagwire made the cable housing for this set. There are two brake barrel cables and a couple of end caps. Don't buy 50 ft of cable housing if you really need it.

9. Yakamoz Universal Derailleur Replacement Repairing

Yakamoz Universal Derailleur Replacement Repairing

The donuts can keep your bike from being scratched, and the caps help prevent the cable end from being scratched. The cables are made of strong steel and coated with a strong material. The shift cable has a housing ofOD 4mm, front and rear shift cable lengths, and cable ends and S-buckles. 2.5m Cable housing, Front Brake cable- 1.1m, Rear Brake cable- 1.7m, and cable ends are included. The material is low temperature and intense heat resistant. The shift and brake cable set is durable. The ideal replacement for Mountain bike is a cable pipe installation.

Brand: Yakamoz

👤I paid $12 for the kit and replaced the shift and brake cables on the bike I was fixing for a friend. The kit has two different cable and housing thicknesses. Shift cables have a different cable and housing. Many of the other bargain kits on Amazon have only brake cable housing and cable which will not give you the smooth shifting you are after. I highly recommend investing in an aircraft style cable cutter. The standard garage wire/side cutter is not going to make it through without making a huge mess.

👤The cable failed before use. The plastic housing cover can split or tear. The product should be pulled. I took my bike out on the road after the housing on my bike split. There is a The housing is needed to provide tension for the brake cable. No tension, no brakes. There is a If the cable failed, it could have caused serious injury. On a bicycle, brakes are important.

👤The complete wiring kit for mountain, road, and hybrid bicycles is the best bang for your hard earned bucks, and it has the best quality parts. There is a You will need a pair of cable and housing cutter for this kit to be completed and professionally installed. The kit comes with both front and rear braking lines. The kit includes two pieces of housing, one gauged for gear and the other thicker for braking. It also includes the cable end tab clamps and housing to make a professional installation. There is a Measure twice and cut once. Make your cut by measuring out one end of what you need. Measure, cut, and use the other end for your next piece of housing. One piece of housing should suffice for both lines. Two housing lines from one housing, two brake housing lines from the thicker housing. There is a The three donut spacers per line are included to prevent the exposed brake lines from rubbing. It's a good kit for the money. You can't go wrong with this kit if you have the right tools and knowledge. It's a well assembled kit. It's five star quality for a two star price.

👤This is a great value for amateur cyclists. Our bikes are made of 70% Shimano parts. I only have a small complaint. The brake cable nipple is slightly smaller in diameter and height, which causes it to not seat firmly in the brake housing brackets. The nipple can twist in the housing on our bikes. I think they will work, haven't done a test ride yet, but if it becomes a problem I'll replace the inner brake cables with better ones. Good luck, your milage may change. One funny bit... If you look closely at the rear derailleur picture, you will see that the cable is labeled "Shimano SIS", which is not the product you are looking for.

👤I bought this kit to change the rear derailleur on my Diamondback. I considered taking it to a bike shop. When I noticed how cheap the cables were, I decided to do my own repairs. I'm glad I did. The quality of the cables is great. I cut a brake cable thinking it was a derailleur cable, but that was my fault. I realized it was too short after I fed it through. If I kept all the outer cables the same length, the internal cable wouldn't reach the tighten nut on the derailleur. I took off the front and rear outer cables so that the internal cable could reach them, but I left a piece over that was long enough to fit through the tightening bolt. It made it a bit harder to tighten the cable because there was barely enough cable to work with. The cable was too small for a medium sized frame and I wish it was at least 4 inches longer, 6 to be on the safe side, but it's not clear if it was a larger frame. I had to cut some of the outer cable pieces after I realized it wouldn't work out. It came with the outer cables and ends. Good wire, held together nicely, but too short.



25'Housing Color: black, housing diameter: 4mm, roll: 25ft The JAGWIRE CGX-SL is 2.0 m x 5.0 m and has a black color. 1.7 m x 1.5 m JAGWIRE Mountain Brake Cable is compatible with both the SRAM and Shimano brands. Jagwire logo, 2.0 m x 4.0 m JAGWIRE LEX-SL, LEX reinforced, Jet Lubed housing, black color. The Mountain Galvinized Shifter Cable is compatible with the SRAM/Shimano. End caps and cable tips are required. There is no retail packaging included.

Brand: Jagwire

👤I put these on my old Diamondback bike because I wanted to extend the height of the handlebars. There is a Installation took a few hours and was done using a cut off tool. It will be easier to put the end caps on when you put tape around the cables. There is a Don't mix thinner and thicker cable for the brakes and the shifters. Make sure to measure twice and use the correct cables for the brakes and shift gears. There is a The cables on the bike were not as good.

👤Really nice kit! I used this for my mountain bike. I only use it for the beach. The car has a triple on the front and 7 on the back. There is a This restored both the shifting and braking functions. The bike came with housing and cables. I was short on caps for the cables. I had left over from the Jagwire Road Kit that I had purchased, so this wasn't a big deal for me. If you need them, you may want to pick up a couple extra. It comes with 8 and I need 10. Would purchase again.

👤The Jagwire brake and shift cables are a great value. A 4 cables costs $25. They are not the best cables that will set you back $65. They are a medium grade. They need to include 2 more Shift cable housing ends. If there was a bicycle mechanic there, they would know that 80% of the bikes have a rear shift cable that has 3 separate housings that use 6 of the 8 cable ends. There are two ends short for the front shift and two cable housings that need four ends. The housing ends are large to fit snug on the smaller shift cable housing.

👤Their cables are of the highest quality. I don't use factory replacement cables or housing on my bike. Only Jagwire. You won't have to blame the housing if you use a quality pair of cutters.

👤I replaced mountain bike style handle bars with banana bike style and bought this kit. The cables needed to be replaced. If you have a bike that does not have open sections of cable, the housing is probably not long enough. The housing is just a small part of the bike. I had enough room to add ape hangers. It would be nice if the seller included more housing. This worked well for me. The cable kits on Amazon were not long enough. This was perfect!

👤The cables and housings work. I ran into a problem with insufficient gear cable housing for a bike that needed housing from both the shift and the derailleurs. I used old housing because of the lack of cable housing. I need to purchase more housing. Measure how much cable housing you need before buying.

👤The cable housings are the sport versions. I knew what I was getting when I saw the description and pictures. I don't think the title deserves any stars taken off. The length of the brake cable housing was sufficient for both rear mount and front disc brakes. The cables and housing are long. I was satisfied with my purchase.

11. Deapher Brake Mountain Common BLACK1

Deapher Brake Mountain Common BLACK1

There are weapon tips. The bicycle brake cable kit is good for better braking and smooth operation, please adjust the tension after installing the new cables. If you enjoy your ride, wear the caps on the cables to prevent the cable end from being scratched. Sturdy and Durable New material from bicycle brake cable housing, heat and oxidation resistance,durable, and high strength and toughness, can provide greater braking power and smooth operation, and are not easy to break. TheBrake pipe line length is rear:61inch, front:23inch, and front:29.5 inch. Measure your sizes before purchasing. You don't need to ask someone to install it. The black Brake Cable Housing Kit is suitable for mountain bike, road bike, common bike and the throttle cable on a go kart. Make sure you choose the right model. The package includes a pair of Front and Rear Brake Cable. To ensure the sensitivity of the brake, just apply a small amount of butter or lubricating oil to the steel wire. If you have a problem with the item, please contact them, they will do their best to help you.

Brand: Deapher

👤When you buy stuff made of rubber, plastic from China, it smells like oil. Do you get that smell every now and then? That's what you get on the cables... Not all things are like this from Chain. You get it every once in awhile?

👤My brake lines were completely jammed. I wanted to replace them. I was confused at first, but now know that you might need to cut the lines to fit your bike. I could find install videos on Youtube for the best price on Amazon.

👤I needed a new housing and cable. The mine was rusted. This worked out the trick. Needed some good cable cutting equipment.

👤Great bike cable and a great price. I would recommend the seller to anyone looking for bike cables.

👤Not a fan. Buy name brand parts. It's your brakes!

👤The small cable end is a key part of keeping your cable safe. I bought some on Amazon. Would be 5 stars if they weren't missing them.

👤Good quality, easy to install, and easy on your wallet.


What is the best product for bicycle brake cable housing?

Bicycle brake cable housing products from Shimano. In this article about bicycle brake cable housing you can see why people choose the product. Eastern Power and Cuteexpress are also good brands to look for when you are finding bicycle brake cable housing.

What are the best brands for bicycle brake cable housing?

Shimano, Eastern Power and Cuteexpress are some of the best brands that chosen by people for bicycle brake cable housing. Find the detail in this article. Boao, Shimano and Mamakoi are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to