The cable end tips are practical and durable. 2 x 1.8m brake cables, 1 x 3m brake housing, 6 x Ferrules, 6 x Cable end caps, 6 x C-Clips Buckle are included in the package. The slick cable is made of steel and has more braking power. The cable for the front and rear brakes is long enough for a custom length. 3000mm is long enough to keep your desired length. If there is a problem with this product, please contact them.
👤We keep this bike outside all the time. The original rear brake cable had a lot of problems. The cable was perfect. The handbrake lever has a "lug" at one end. The cable was about a foot longer than it should have been. We followed the instructions after finding a video on the internet. It worked out well. The critical rear brake feels new. I was surprised it was so easy. The product should have directed us to a video. There are millions of bike videos. We used theBrake Caliper Mounting & Adjustment - Linear Pull & V Brake.
👤There's not much to say. The value was great for everything. I replaced the entire brake cable system on a fixed gear bike. Since the cables were replaced, the bike has gone over 100 miles and there have been no issues.
👤The cables and housing are of top quality. For the guy or gal that has an old Huffy or Schwinn that needs new brake lines, this is perfect.
👤The cable end is smaller than I had on my bike. It will work for now because the jury was rigged. The diameter of my cable is larger. I've read that the cable is typically a smaller diameter. It worked but not a good replacement. I'm going to the bike shop next time.
👤I had to replace one of the break cables on my wife's bike. Housing, cable, and other things. All was good. Exactly what I needed. Would buy it again. Prompt delivery is a good buying experience.
👤Came quickly, in good condition.
👤You don't need anything more than the bicycle, wire cutter, and wrench.
There is a 2-year warranty against defects in materials and workmanship. Proof of purchase is required for the warranty to apply to the original owner. C-clip cable guides are used for folding bikes. The function is suitable for bicycle lines pipes fixation. ADVANTAGE is a light weight and durable. 100% brand new and high quality material, made of high quality plastic. The package includes 30 bicycle c-clips.
👤I bought a Raleigh Talus 4. I lost two brake line clips when loading and unloading my bike. The clips are a tad smaller than the originals, but they seem to snap in place more tightly. Very happy.
👤Material quality is good, but not well on the cannondale trail. They are too big and barely clip on. I lost a few. Went back to using zip ties.
👤The cable guides on my Giant mountain bike hold the cables in place. Plastic cable ties are not as nice. It can pop off in a crash, but only if a cable is damaged. I would rather lose a clip than a cable or brake line.
👤The quality of the c-clips was good, but they were too wide for the holes on my Niner Rip 9 RDO carbon fiber frame.
👤The factory clips that dropped off my Fuji in less than six months were replaced. The cables are held securely.
👤It worked perfectly on my Kona Honzo. Should you lose a few, you will get plenty for your money.
👤Great value! It's always worth keeping several.
👤This fit my bike. It does the job, but you have to force it in.
The package has a dimensions of 2.311 L x 25.908 H x 9.398 W. The brake cable crimps are made of high quality aluminum alloy and are low in cost. The bike cable end caps can be used to protect the brake wire core and the speed change wire core from being torn apart by the cable wire ends. The cable end tips are suitable for all kinds of bikes. The best replacement for the worn cable end caps is the 0.08inch/ 0.2 cm hole.
👤I decided it was time to rebuild my 15 year old road bike since the cable ends were long gone and the cables were badly damaged. I had to buy a ton of ends for the two cables, but I found the ones that fit both. I bought them despite being skeptical. They work for both size cables.
👤I was able to fit this onto my bike brake wires. My wires are very damaged. I used the tool in the picture to grasp the wires and twist them into a tight uniform smoothness in order to fit into the opening of the wire cap thingy. I slowly moved the cap over the wires. I could feel the wires catching and gripping as I twisted it and it became secure as I wanted. I tried to smash the cap the same way as the original, but I couldn't do it with my tool. I don't want it to come off so I won't test how firm it is. I only care that the wires are capped. The first try was a success.
👤It's easy to crush without cracking, and have held for several months. Toxic poisoning from handling them has not killed me yet. So far, so good.
👤These are good for either shift or brake cables. That's all that matters.
👤These are ideal for cable replacements. Without a cable crimp the cable becomes unwound and the individual strands become like needles, impaling your skin where it may happen to contact them. Be safe! Control the ends of your cable.
👤Even though they will probably never be noticed, the colors are fun and they seemed to crimp fine using a pair of needle nose pliers. I use a bike cable that they have been installed on.
👤It was cheaper to buy this lot than it was to have a mechanic install it. I need to find a project for them.
👤If you see what you get, I have no complaints and expect them as I use them. I have used most of the ones that I have.
👤It's just what you need to finish the job.
If you don't like their products or have any questions, please come to them. All the problems would be solved by them. The cable is double tipped. One end has the mushroom shape for road bike and the other has the lolipop shape for mountain bike. Take the other end and leave the suitable one. It is an ideal replacement for road bikes, folding bikes, and cable pipe installation. PTEE coated cables have greater strength and wear-resistant material. Better braking power and smooth operation are provided by wires. The bike brake cable housing kit is made of quality material, each replacement part has been well made, reliable and durable, and can be applied for a long time. The bicycle brake cable kit is made of new PVC material and treated with special technology to ensure the brakes are sensitive. 2 x Brake Cable (Front Brake cable- 1.1m, Rear Brake cable- 1.7m),6 x 2 x Cable end caps. 3 x O-ring.
👤The cables were double ended and I am more than happy. That is road racing brake levers. I will tin the cable ends and crimp the aluminum end covers if the cable ends are supplied. Because neatness is important.
👤It worked out as intended. There were end caps and ties. There is a complete kit for brakes.
👤Needed lever updates so they did the trick.
👤The cables, lines, and cap covers fit like a glove. If you don't have a cable cutter, I recommend buying one.
👤I usually buy a set of bike brake cable from Rpuomtz, but this one is a great value and good enough for the occasional time when I need to work on our household's bicycles. I like the fact that I also get brake cable ferrules, end caps, S-hooks, and cable isolators, with several parts not found in the kit. The value is quite good at $8.69. I can't speak yet about the long-term dependability of the cables and housings, but I will update this review if something goes wrong. I rate it 5 stars.
👤I thought the Rpuomtz Bicycle Brake Cable and Housing set had break cables for road and mountain bike cables. There is only one set of cables. The cable is double tipped. One end has the mushroom shape for road bike and the other has the lolipop shape. You cut off the tip you don't need if you decide you need it. Good luck and don't make a mistake. I had the wrong expectation and it was ingenious. The small red print in the photos was important to me. It's not written in the product content or how you are supposed to use it. There is a The length of the front and rear brakes is determined by the 2 cable set. There is a long black plastic housing for both front and rear. There are many plastic housing ends and S clips. I have what I need for a complete bike brake cable overhaul. I have to cut the tip off.
👤The cables were replaced on our mountain bike. We had to replace the brake handles and the other end was in a bad shape so we decided to replace the cables. They were easy to replace and install. Good quality and durable brake cables are what they are.
Measure the distance from the brake mounting hole to the middle of the wheel by using a ruler and measuring tape on the metric side. It is possible to build a sturdy construction. Sport Slick cables and housing liners offer reliable braking performance. Double-ended brake cables are compatible with both mountain and road brakes. There is a 2-year warranty against defects in materials and workmanship. Proof of purchase is required for the warranty to apply to the original owner.
👤My application was filed in 1990. The Trek 720 Multi- Track had original brake and saddle cables. The Jagwire cable is thinner than the galvanized cables I replaced. The Jagwire cables seem to be ferritic, which is higher iron content, so they will eventually oxidize, but not as quickly as galvanized coated carbon steel cable. The cables are double-ended, so they need to be cut. Also, note: Side-cut pliers or a cold chisel will not work in this application. Make sure you have a set of cable cutters that are sharp enough to cut the cable. Round the end of the sheath so the cable won't rub. I can't speak to the effect of the outer sheath's construction because most of the cable runs are open. I only have a small amount of sheath at the handlebars. I found the product to be exactly as advertised and just test driving, they seem to be an improvement in my perception of solid pull to the brakes.
👤It would be better if Jagwire would care enough to send me a black housing that I paid for. They sent me a gray cable with a sticky label that said "Black" on the packaging. There is a The housing was not made black because you covered the sticker "Gray" with the one saying "Black". That's not how you change the colors. I had never replaced the brake cables before. The kit had everything I needed for the bike. I didn't buy cable or housing cutter because I found a better way to cut off a disc on YT. I simply marked the cut line with a blue marker and inserted the new cable into the housing, then carefully cut off the cable with the cut-off disc. There is a I cut the cable again after installing it and adjusting the brakes to prevent the inside jacket of the housing from flattening, but the cable cut was just to prevent the flattening of the inside jacket of the housing. There is a The old Ironhorse department store cable is about 50 percent more dense than the real one, so thats good. There is a The quality of the kit was outstanding, even though I received a wrong color.
👤I saw pictures of the Carbon Silver color on the internet before I ordered it. There is a If you're interested in figuring out what it looks like, here it is. The carbon silver is a mix of silver and gold with a yellow tint. It is sealed in a sort of soft plastic or rubber coating, but it is very thin. I was hoping that the shadows on the braided metal surface would be thicker. I think it will become dark over time since the outer coating material looks transparent. I did not see any blue tint in the lighting. There is a It looks a little dirty and not that thrilled with it so far. Hopefully it matches better when I install it on the bike. There is a The brake cable and housing are not very thick. In my case, the other ferrule endcaps fit. There was no rubber or plastic hosing.
The storage case is included. C-clip cable guides for bikes. The hook is inside 8mm and has a width of 6mm. It's on the bike fork.
👤These fit well and were easy to put in. They gave a nice snap when they locked in. The ones that came from the manufacturer were not as good as the ones that hold very well. These are good if you need to replace your clamps after a trial.
👤You'll need a few of these for the rear brake and/or derailleur if you buy a used frame. One brand seems to work the same as another, and there's no rocket science to that. These will get the job done and you'll have a few extra to spare.
👤Over the last year, I have lost a few of these. I have been using zip ties. They work well as new, after being bought to replace them. They look better because they are not zip ties. I recommend them.
👤These come off my bike when I take it off the car rack. The replacements work well.
👤The item arrived quickly. The ones that came with the bike are a bit thicker than the ones that I have lost, because they don't wiggle once inserted, which is a good thing. The cables are harder to come off of the Trek Marlin 7.
👤It was a perfect fit. The castings are clean and the edges are sharp.
👤The clips that hold the cables on my Giant brand mountain bike pop off easily when I take the bike on and off of a carrier. Having these spare parts available helps my peace of mind. The fit was perfect.
👤We were installed in cold weather and didn't break.
25'Housing Color: black, housing diameter: 4mm, roll: 25ft The JAGWIRE CGX-SL is 2.0 m x 5.0 m and has a black color. 1.7 m x 1.5 m JAGWIRE Mountain Brake Cable is compatible with both the SRAM and Shimano brands. Jagwire logo, 2.0 m x 4.0 m JAGWIRE LEX-SL, LEX reinforced, Jet Lubed housing, black color. The Mountain Galvinized Shifter Cable is compatible with the SRAM/Shimano. End caps and cable tips are required. There is no retail packaging included.
👤I put these on my old Diamondback bike because I wanted to extend the height of the handlebars. There is a Installation took a few hours and was done using a cut off tool. It will be easier to put the end caps on when you put tape around the cables. There is a Don't mix thinner and thicker cable for the brakes and the shifters. Make sure to measure twice and use the correct cables for the brakes and shift gears. There is a The cables on the bike were not as good.
👤Really nice kit! I used this for my mountain bike. I only use it for the beach. The car has a triple on the front and 7 on the back. There is a This restored both the shifting and braking functions. The bike came with housing and cables. I was short on caps for the cables. I had left over from the Jagwire Road Kit that I had purchased, so this wasn't a big deal for me. If you need them, you may want to pick up a couple extra. It comes with 8 and I need 10. Would purchase again.
👤The Jagwire brake and shift cables are a great value. A 4 cables costs $25. They are not the best cables that will set you back $65. They are a medium grade. They need to include 2 more Shift cable housing ends. If there was a bicycle mechanic there, they would know that 80% of the bikes have a rear shift cable that has 3 separate housings that use 6 of the 8 cable ends. There are two ends short for the front shift and two cable housings that need four ends. The housing ends are large to fit snug on the smaller shift cable housing.
👤Their cables are of the highest quality. I don't use factory replacement cables or housing on my bike. Only Jagwire. You won't have to blame the housing if you use a quality pair of cutters.
👤I replaced mountain bike style handle bars with banana bike style and bought this kit. The cables needed to be replaced. If you have a bike that does not have open sections of cable, the housing is probably not long enough. The housing is just a small part of the bike. I had enough room to add ape hangers. It would be nice if the seller included more housing. This worked well for me. The cable kits on Amazon were not long enough. This was perfect!
👤The cables and housings work. I ran into a problem with insufficient gear cable housing for a bike that needed housing from both the shift and the derailleurs. I used old housing because of the lack of cable housing. I need to purchase more housing. Measure how much cable housing you need before buying.
👤The cable housings are the sport versions. I knew what I was getting when I saw the description and pictures. I don't think the title deserves any stars taken off. The length of the brake cable housing was sufficient for both rear mount and front disc brakes. The cables and housing are long. I was satisfied with my purchase.
The ideal replacement for Mountain bike is a cable pipe installation. 2 x 1.8m brake cables, 1 x 3m brake housing, 6 x Ferrules, 6 x Cable end caps, 6 x C-Clips Buckle are included in the package. The slick cable is made of steel and has more braking power. The cable for the front and rear brakes is long enough for a custom length. 3000mm is long enough to keep your desired length. If there is a problem with this product, please contact them.
👤Not having many bike tools on hand, I figured out a way to cut the cable housing cleanly with a metal cutting blade in my chop saw. The cable cutter was for $11 at Home Depot. I saved the brake cables from Jagwire, and re-used my existing cables for my brakes. I recommend the kit as a solid and reasonably priced product, even though I did not get a response to my email about the product. My project was to convert a mountain bike to a cruiser.
👤If you have a BMX bike that has a bad gyro setup, just run straight cables. The majority of mongoose bikes have 900 adjustments and the brakes are the biggest complaint. The brake cable kit is worth a lot. The wire is very well made and the cable is thick. Make sure you know what you want to do. Purchase a cable cutter or use a Dremel with a cut off wheel. Make sure you wear eye protection.
👤The Blue Sunshine Brake Cable Housing Kit comes complete with clips to hold the cable in place. The linings on the housings make it easier to operate. Bicycle tools such as housing cutter and cable cutter are very helpful if you don't have experience with this type of installation. You risk improper installation and a dangerous brake system if you don't have the above. I would recommend this set to a friend.
👤Yesterday I installed the brake cables. It's easy to do. The cables are thinner than the ones on the bike. Will they last? Who knows? The old ones didn't break, they just didn't slide as smoothly as they should have, so these might be fine. I would be more confident if they were the same parts as my bike.
👤The cables I received will only work with a mountain bike. The road bike brake lever is not compatible with the cable end. The cable and other parts of the brake housing are low quality. I can't recommend this item.
👤The kit has 2 cables, sleeves, and ends. You don't need to replace the cables. Be sure to solder the cable where you are cutting it. I learned the hard way, that should be the only instruction in the kit.
👤I fix bikes for kids in need. I had a lot of mongoose BMX bikes. You almost can't tell they were there because you used these to skip them, and took a grinder to the left over ring. It was very easy to install. Will definitely be buying again.
👤Jagwire made the cable housing for this set. There are two brake barrel cables and a couple of end caps. Don't buy 50 ft of cable housing if you really need it.
There are weapon tips. The bicycle brake cable kit is good for better braking and smooth operation, please adjust the tension after installing the new cables. If you enjoy your ride, wear the caps on the cables to prevent the cable end from being scratched. Sturdy and Durable New material from bicycle brake cable housing, heat and oxidation resistance,durable, and high strength and toughness, can provide greater braking power and smooth operation, and are not easy to break. TheBrake pipe line length is rear:61inch, front:23inch, and front:29.5 inch. Measure your sizes before purchasing. You don't need to ask someone to install it. The black Brake Cable Housing Kit is suitable for mountain bike, road bike, common bike and the throttle cable on a go kart. Make sure you choose the right model. The package includes a pair of Front and Rear Brake Cable. To ensure the sensitivity of the brake, just apply a small amount of butter or lubricating oil to the steel wire. If you have a problem with the item, please contact them, they will do their best to help you.
👤When you buy stuff made of rubber, plastic from China, it smells like oil. Do you get that smell every now and then? That's what you get on the cables... Not all things are like this from Chain. You get it every once in awhile?
👤My brake lines were completely jammed. I wanted to replace them. I was confused at first, but now know that you might need to cut the lines to fit your bike. I could find install videos on Youtube for the best price on Amazon.
👤I needed a new housing and cable. The mine was rusted. This worked out the trick. Needed some good cable cutting equipment.
👤Great bike cable and a great price. I would recommend the seller to anyone looking for bike cables.
👤Not a fan. Buy name brand parts. It's your brakes!
👤The small cable end is a key part of keeping your cable safe. I bought some on Amazon. Would be 5 stars if they weren't missing them.
👤Good quality, easy to install, and easy on your wallet.
If you have a problem with the item, please contact them, they will do their best to help you. You will get a complete Inner Replacement Set. You can also get a set of free accessories. Housing brake Cable end caps, 4 x pipe shift Cable end caps, 4O-rings. The bike brake/shift cables are made of high quality materials. O-rings and pipe end caps are durable. The brake / shift cable is easy to install and can meet different bike needs. If the cables are too long, you can cut them to the length you need. To keep cable ends nice and tidy, be sure to use the cable end caps. This kind of bike cables set fit most bikes. Mountain bike, road bike, common bikes, kids' bikes, folding bikes, BMX bike, recreational cycling. Their goal is to provide excellent products and satisfactory service to their customers. They will do their best for you if you have any questions.
👤The cap on the brake cable is actually 7mm x 6.5mm. Since I only ordered this one, I used it since I needed to install this asap to fix my pedal. ?coliid is I1B8YROJLUQ63P&colid is YS3QIGRCS9D8
👤The kit was great. It came with everything I needed to get my mountain bike running again. Installation is easy with the cable ends and ferrules. After a quick ride and adjustment, they have been fine ever since.
👤It was replaced by a worn MTN. BIKE cable. Straight forward process with some help. Brakes should work now.
👤The exposed cables are starting to break after less than 12 miles.
👤The little bits you get in the package are high quality cables. Proper bicycle cable cutter can cause fraying.
👤The dollar store has bike shop-quality cables. It's a great addition to your inventory.
👤The job was done for a reasonable price.
👤Sutituir gusts de freno han resultado fcil de instalar.
The brand is Shimano. The design has low operating forces. Smooth and quiet stopping power is what it is designed for. Excess mud can be prevented with the Mudguard.
👤The tolerances on the integrated-bushing V-brakes and the T4000's are no exception, as was mentioned by JRP. The locating pin on the V-brake stud doesn't sit deep, and the brakes don't sit flush on the V-brake stud. There is a The biggest concern I have is that the bolts are only 15mm long, which is not long enough for most V-brakes. The edge of the brake post is buried under the body of the V-brake. There is a You're barely getting thread engagement on one of the most critical parts on your bicycle now that you have a deeper set mounting boss with a shorter bolt. This combination helped snap a stud off a bike I was working on, and I had a spare fork. There is a The jury is still out on whether the stud was faulty or if the short length of the bolt helped to tear the front half of the stud off, but I'd wager that a combination of the two contributed to this failure. This is not how to engineer a product. As nice as a V-brake sounds, it's all wrong. Would I buy a new V-brake if I knew what I know now? No. As a few others observed, the brake pads were almost used on these. The edge of the rubber looks a bit odd at first glance.
👤I didn't want to do a review until I found out what was wrong with the brake. Everything works out as it should. The brakes are beautiful and work well, but they don't flush properly, as everyone has said. The issue is not due to bolt size. The bolt size is 20mm. The depth of the inside of the brakes doesn't match the depth that comes standard with every bike I measured to be roughlY 0.25 in. I hope you read this because it is an easy fix and can provide a lot of happy customers. If they fix the issue on the brakes, I would buy again from them.
👤I'm replacing my Trek 7200 hybrid with a new one. I was in need of new brake pads and wanted to try the hybrid pads, but I decided to upgrade my brakes after seeing the new pads. For only a few bucks more, they can offer better stopping power. I can only imagine what these can do when the pads wear out. There is a The installation was very easy. There is a The cane with bike is better for stopping power and comes with a new rubber boot. There is a The brake pad adjustment doesn't come with allen head or a nut. Resolved by taking my Allen head nut. There is a If you're looking to replace brake pads on a subpar set of V-Brakes or for replacement V-Brakes in general, this is a great deal.
👤I bought these for the old bike that needed new cables and pads. I upgraded to the entire sets for the price. levers and cables are not included. I assumed they would work because I read in the reviews that someone had used them on the exact model of my bike. Since the rear set was on backorder, I ordered 2 front sets. They work well enough. The spring is not as strong as it used to be, so I had to fiddle with them to see how they would do on the rear. I used the top because the rear mounts have no resistance in the center. The front mounts only have one hole. It took a long time to mount, mainly because of trying to align and toe in the pads. Thank goodness for Park Tools. They have videos on how to install V brakes. It would be helpful for the seller to explain the differences between the front and rear sets on their Amazon sales page.
Bicycle brake cable hanger products from Cuteexpress. In this article about bicycle brake cable hanger you can see why people choose the product. Luckycivia and Eacozy are also good brands to look for when you are finding bicycle brake cable hanger.
Cuteexpress, Luckycivia and Eacozy are some of the best brands that chosen by people for bicycle brake cable hanger. Find the detail in this article. Rpuomtz, Jagwire and Juscycling are also brands that their products are worth to check.